mojave

UKB-1 UKB-2

UKB-3 UKB-4 UKB-5

Formats

STONE COLOR FINISH

SLATE

SANDSTONE

TRAVERTINE

QUARTZITE

BROWN

PINK

GREY

GREEN

BLACK

HONED

FLAMED

MATTE

Phone: 1.888.862.8397 Fax: 1.888.868.9887

3. Apply set- ting material using the notched side of a 1/4”x1/4” squar- squar- -notched trowel.

4. Smoothen out the setting material using the flat side of the flat side of the trowel; create an even bedding approximately 3/16” thick.

7. Apply the tile sheets onto the setting material. Align the tile sheets carefully, carefully, making sure that the grout lines are parallel with one another.

1. Clean surface of application. Surface should be free of dirt, paint, oils, curing compounds etc.

2. Make sure the back of the tile (and sub-strate) is clean. Wipe with a clean damp sponge.

8. Use a rubber grouting float to apply firm pres-sure onto the tile sheets, cre-ating a level surface.

9. Using a clean damp sponge or cloth, clean any excess set-ting material that may have “oozed” over the tile surface. the tile surface.

12. Apply grout into grout jointsthe grout joints, be sure that there are no holes while applying grout.

14. When grout has set, clean the tile with a clean,damp sponge.

10. Allow 24-36 hours, after installation, for tile to set before continuing.

11. Apply a coat of quality penetrating sealer before grouting.

13. Clean any excess grout with a damp sponge or cloth, before grout hardens.

NO NO NO