mohamad rizal resume
TRANSCRIPT
MOHAMAD RIZAL MISBAHPERSONAL PARTICULARS
AREAS OF INTEREST
Technical: Maintenance Drilling Rig, mechanical engineering, building maintenance and Factory maintenance
EDUCATION BACKGROUND1989- 1991 Institute Technology MARA
Certificate in Mechanical and plumbing1987- 1988 SMV Ipoh Vocational School
Welding and fabrication (SPMV)1984- 1986 Sekolah Menengah Dato Mustafa, Pasir Panjang, Sekinchan Selangor
Sijil Rendah Pelajaran (SRP)
WORK EXPERIENCES
Present UMW Oil and GasAddress UMW Workover SDN BHD Suite 3A, Level 18, Block 3A, Plaza Sentral, Jalan Stesen Sentral 5, 50470 kuala Lumpur Malaysia Phone +60320968788 Duration 1st June 2014Position Chief Mechanic Role and Responsibilities :
- committed and responsible for the daily maintenance operations- Oversee, planning and scheduling for rig equipment maintenance
program- Train rig mechanic & roughneck in handling/operation of
equipment and safety procedures to comply with company policies- Read specifications and determine operation requirements
according plan standard operating procedures (SOP)- Order materials request or supplies for operation and maintenance
consumption- Responsible for safe team work with respect to all rig maintenance
activities- Oversee all rig equipment are operates and run in tip top
performance- Confer with technical personnel to resolve rig equipment problems- Execute rig down / rig up for workover project at different
locations
I/C No 710731-10-5479 Age 42Place of birth Sekinchan Selangor(31/7/1971)Gender MaleNationality MalaysianMartial Status MarriedExpected Salary
Address No 339, Jalan 18/3, Taman Seri Serdang, 43300Seri Kembangan, Selangor
Mobile +6012-6995331 +6010-5485332
- Assist and ensure smooth rig moving to new location- Perform troubleshoot and close monitoring to rig equipment - Record and report rig equipment breakdown/failure
Company Name CEC international Malaysia Sdn Bhd Address Wisma MABA 7th floor No.6 Jln Hang Jebat, 50150 Kuala Lumpur Malaysia Tel.03 20705007 ext 411 Gordon Ferguson (0162097247) M&E Chief Duration 07 April 2014 to 30 June 2014 Position Welder (M&E) department Role and responsibilities
- Welder/fitter - Fabrication job- Under project M & E(KVMRT) - Tunnel MRT from Sg buluh to Kajang
Company Name Drill Quip Pty Ltd Address 173 Walker Road, Kenilworth, Qld, Australia 457 PO Box 794 Glenelg, SA, Australia, 5045 Position Drilling Top Drive (Mechanical Site Tech) Duration 15 august 2013 – 30 Feb 2014(contract basis) Salary 250usd per day (Not pay OFF) Role and responsibilities - Manage daily drilling operation with ‘0’ downtime - Servicing and overhaul hydraulic Tesco Top Drive. - Routing daily maintenance. - Rig up and rig down Top drive. - Reduce downtime during operation. - Manage daily check list for equipment - Prepare equipment spare part - Preventive maintenance during standby equipment - Prepare stock list min/max spare part item Involve in overhaul Generator engine and Drilling equipment and recertification to doing new project drilling. Last project with oil and gas Japan in Nagaoka Japan.
Company Name KST DRILLING TECHNILOGIES (INDONESIA & INDIA PROJECT) Address Kejuruteraan Semudra Timur Berhad
No.5, suite A-21-12A, level 21 menara UOA bangsar,Jalan Bangsar Utama 1 Bangsar Utama, 59200 Kuala Lumpur.
Contact No :03-22824887, 03-22821589 Position Rig Maintenance supervisor (Mechanical Engineering) Salary RM 12,500.00 per month Duration 1st april 2005 – 31st July 2013 Role and responsibilities
Committed as a leader and be responsible for the daily maintenance operations under project Cairn Energy India, Sealan Exploration India, Pertamina, KKE(Kalimantan Kutai
Energy) and VICO energy Indonesia.
Oversee, planning and scheduling for rig equipment maintenance program
Train rig mechanic & electrician in handling/operation of equipment and safety procedures to comply with company policies
Read specifications and determine operation requirements according plan standard operating procedures (SOP)Order materials request or supplies for operation and maintenance consumptionResponsible for safe team work with respect to all rig maintenance activities
Conduct pre-job scope meeting and discussion on job procedure and JSA
Understand third party services and their equipment working procedure (SOP)
Oversee all rig equipment are operates and run in tip top performance
Confer with technical personnel to resolve rig equipment problemsExecute rig down / rig up for drilling project at different locations
Assist and ensure smooth rig moving to new location
Perform troubleshoot and close monitoring to PLC rig system & Top drive system
Record and report rig equipment breakdown/failure
Involve in building/fabrication of two land rigs 750HP and 1000HP
Represent KSTB in Canada for rig fabrication (Onshore rig)
Execute onshore drilling rig up/rig down
Work closely with Go-Getter HYDUKE Energy – Rig commissioning
Company Name PLAZA PARK HOTEL
Address 6, Plaza 138 Jalan Ampang Kuala Lumpur 50450 , Malaysia
Position Maintenance officer Duration 2000 – 2005 Role and responsibilities
Extensively involve in maintenance program for mechanical, electrical and plumbing system.
Oversee building property and equipment/assets condition
Responsible to train junior maintenance workers in complicated tasksOversee generator and engine maintenance, condition and performanceExecute schedule maintenance on water pump and chiller system
Oversee and ensure building safety device/facilities in good conditionRecord and report equipment breakdown/failureExecute instruction from Maintenance Manager
Company Name NYLEX POLYMER (M) SDN BHD
Address Persiaran Selangor, Seksyen 15, 40200 , Shah Alam, Selangor
Position Maintenance supervisor Duration 1995 – 2000 Role and responsibilities
- Oversee and execute maintenance program for factory machineries/ equipment- Supervise and train maintenance engineering staffs- Planning and scheduling preventive maintenance- Execute trouble shoot, repair and service work- Oversee and ensure all machines in good condition- Execute fabrication and modification work
- Record and report equipment breakdown/failure- Participate and promote safety culture program
Company Name ANSHIN JD MACHINERY (M) SDN BHD Address Jalan Gergaji, Seksyen 15/14,
40200 , Shah Alam, Selangor Position Maintenance fitter/ welder Duration 1993 – 1995 Role and responsibilities
- Oversee and execute maintenance program for factory machineries/ equipment- Fabricate and build new bending/cutting machine- Execute electrical and electronic control system unit- Execute troubleshoot and maintenance on hydraulic control system- Execute modification and wiring system- Oversee all factory equipment and machine condition
Company Name CHEE LEAT ENGINEERING (M) SDN BHD
Address Lot 31, Jalan 18/62, Seri Kembangan, 43300, Selangor
Position Maintenance fitter/ welder Duration 1993 – 1995 Role and responsibilities
- Execute fabrication work (Oxy cutting & Arc) and maintenance- Maintain and repair machine/equipment- Execute machining lath and milling- Execute grinding works and modification- Handling spot welding machine
- Handling MIG welding machine- Handling plasma cutting- Fabrication work- Moulding design- Daily target production
COURSES / TRAINING ATTENDED
Course Certificate No Welding and Fabrication(SMV Ipoh Perak) Piping and plumbing(IKM Lumut Perak) Detroit Diesel Engine(MTU Singapore) MSO office /Microsoft office(Institute GENERASI) PC maintenance & repairing(Institute GENERASI) PTW training (Vietnam) PTTEP 5 S training
SKILLS & PROFICIENCY
LANGUAGE
Language Proficiency Description
English Intermediate Spoken and Written
Malay Good Spoken and Written
.
CONTACT AND REFERENCE
1- Saiful Fazli Hr KST drilling +60123298565
2- KK Balan Project Manager CEC international +60163434467
3- George Murty Operation Manager UMW Oil and Gas +60172925633