moduloc controls ltdmoduloc-intl.com/moduloc-content/uploads/2017/04/...termination for use with...
TRANSCRIPT
-
Standard Fibreoptic Light Guides in lengths of 2-15 mtrs. Available in two formats: - LGH-XX-AB (Standard) - LGH-XX-BC (Fishtail)
Rated to 400ºC Optic Lead is stainless sheathed steel.
Controls Ltd
®
®
MODULOC® Technology - Lasers for Precise Product Measurement
MODULOC
General Description
FIBRE OPTIC LEAD SPECIFICATION
This Fibre Optic Lead is square locked construction produced in stainless sheathed steel rated to 400ºC. It is made up of standard trade size 3/16” sheathed cable. Specification is as shown below.
Please note that the Standard “A” Connector as shown fits Spot Lens such as 1º, 2º, 4º or 7º FOV. “B” end is an N-type connector termination for use with MD9100, MD95100 and MD4000 devices. Fishtail “C” end as shown fits with Slit FOV Lens such as FRO, FR1, FR2.
Item Value Description
Inside Diameter (mm) 4.8
Outside diameter (mm) 6.9
Bending Radius : Static (mm) (centreline) Dynamic (mm)
23 33
Standard Carton (m) 30
Compression Resistance 3 Medium (750 N)
Impact Resistance 3 Medium (2 J)
Minimum Temperature 5+ -100ºC
Maximum Temperature 7+ +600ºC
Bending Resistance 4 Flexible
Electrical Properties 0 None declared
Resistance to ingress of solid foreign objects (I) 4 Protected for particles Ø > 1.0mm
Resistance to ingress of water (P) 0 None declared
Corrosion Resistance inside/outside 4 High / High
Tensile Strength 3 Medium (500 N)
Resistance to Flame Propagation 1 Non-flame propagating
Suspended Load Capacity 0 None declared
Attenuation
Glassfibre Spec
Cable Spec
“A” End “B” End “C” End