modular system - components added as needed

VoiceNET High Rise Voice Evacuation System

Features:

Description:

True Multiplex 6 Channel Distributed Audio Integrated Fire Phone, Area of Rescue and Fan & Damper Control capabilityModular System - components added as needed Integrated 2 Channel Digital Message RepeaterLive Microphone Page to any zoneFast RS-485 Communication Protocol

Easy Installation and OperationNatural Sound Voice RecordingsBuilt in Alarm and Alert SignalsUp to 4 Minute Message CapacityWorks with 12VDC or 24VDC Fire Alarm PanelWorks with Analog/Addressable andMicroprocessor based Fire Alarm Panels.3 Minute Message Restart on Microphone KeyMade in the USA.

Fully Supervised

The Hochiki VoiceNET High Rise Evacuation System operates in conjunction with the Fire Alarm Control Panel (FACP) in a building to provide automatic response to life safety emergencies.

The Hochiki VoiceNET includes all necessary features to provide an effective voice evacuation system. The Hochiki VoiceNET can be custom configured to satisfy the needs of any high rise application.

Fire department authorities can easily take command of evacuation or relocation procedures and emergencies. Building management and fire brigades can monitor and control emergency response even before the professionals arrive

The VoiceNET system includes capacity for 6 channels of simultaneous audio. This provides for evacuation, stay-in-place, or other public address announcements and automatic messages.

Fire Fighter Phones or Warden Stations may be included as required. Area-of-Rescue stations can reassure handicapped occupants that help is on the way.

System Configuration:

Basic System Includes:

Master Panel (FNV-MP) Master Mic Control 16 switch control points Dual Channel DMR High speed communication loop

Distributed Panel (FNV-DP) 4 Output Zones (may be configured for 8) Dual Channel Audio Interface Dual Channel Amplification Optional Integrated Fire Phone Area-of-Rescue Number of distributed panels to be Determined by building specifications

Maximum System Configuration

Up to 256 Distributed Panels (FNV-DP) And up to 2028 monitor and control points

LISTED#S5661

277-96-E

6911-1446:103

PAGING CONTROL

SYSTEMRESET

PAGEALL-CALL

FAULTSILENCE

7051 Village Drive, Suite 100 Buena Park, CA 90621-2268 714.522.2246 www.hochiki.com

PAGING CONTROL

Hochiki VoiceNET True-Multiplex

System Capabilities

NetComm Loop:-Twisted Pair, Category 5 -4,000 Feet between panels-50,000 Feet Total System Loop-Data and 6 Audio Channels Simultaneously-High Speed RS-485 Communications-Style “4” or Style “7” Field Selectable

Head End Control

FNV-MPMaster Panel

TB1

TB3

TB2TB1

TB3

TB2

Fire Phone

#22 AWG Twisted Pair

FNV-DP Distributed Panel

FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

Fire Phone

FNV-25/50/100

TB1

TB3

TB2TB1

TB3

TB2

Voice EvacuationSpeaker Circuits

Fire Phone

Fire Phone



FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

Voice EvacuationSpeaker Circuits

Fire Phone

#18 AWG

Fire

Phone

Fire

Phone

FIRE PHONE CONTROL

Fire

Phone

Fire

Phone

Fire

Phone

Fire

Phone

Fire

Phone

Fire

Phone

FNV-25/50/100

FNV-25/50/100 FNV-25/50/100

RS 485 DATA LOOP

S

P

CM

AR

FNV-DPS

S

P

S

AR

S

P

S

S

P

SBasement

1st Floor

2nd Floor

4th Floor

5th Floor

3rd Floor

6th Floor

7th Floor

8th Floor

9th Floor

10th Floor

11th Floor

S

P

AR

FNV-DPS

S

P

S

AR

S

P

S

S

P

S

AR

AR

CMS

P

AR

FNV-DPS

S

P

S

AR

S

P

S

S

P

S

AR

AR

Hochiki VoiceNET High Rise Multiplex

11 Floor Typical Riser Diagram

FNV-MP

S

P

ARSpeaker, Speaker/Strobe

Fire Fighter Phone Jack

Area of Rescue Station

7051 Village Drive, Suite 100Buena Park, CA 90621-2268

Specifications are subject to change without notice. Specificationsare provided for information only and no responsibility is assumedby Hochiki America, Inc. for their use.

Engineering SpecificationsHochiki VoiceNET High Rise

The voice evacuation system shall be Hochiki Series VoiceNET FNV High Rise or approved equal.

The VoiceNET FNV system shall include one Master Panel and one or more Distributed Panels. The system shall be microprocessor based, and shall be compatible for use with contact closures from the Fire Alarm Control Panel, (FACP). The system shall have a high-speed communication bus and have the capacity for 6 channels of audio and data on a single pair of wires. The field wiring for the communication bus may be configured for either Style "4" or Style "7" supervision. The system shall have the capacity for Fire Fighters Phone, Area-of-Rescue communication and also have the capacity for Fan & Damper control with monitored feedback. The system shall have a minimum capacity of 2028 monitor and control points.

The Master Panel shall contain an integral microphone, dual channel digital message repeater, (DMR) and digital tone generator, 120 VAC power supply, and battery charger. The system shall be modular in design, and shall be expandable such that additional system control points may be configured. The system shall include integral self-diagnostic routines that shall continually monitor system status, and shall indicate the precise type of trouble conditions should they occur in the system. A trouble condition within the system shall cause a trouble indication to be transmitted to the FACP.

Distributed panels shall provide a minimum of 4 Class "B" speaker circuits, expandable to sixteen total. Alternately, panel may be configured for 4 Class "A" speaker circuits, up to 8 total. Panel may be configured for 1 to 8 amplifiers. Panel must provide up to 6 simultaneous audio channels, up to 8 Fire Phone circuits, up to 4 Area of Refuge circuits and up to two Control/Monitor loops. Amplifiers will contain their own power supplies, battery chargers and provide auxiliary power for other components. Speaker circuits shall be supervised for short and open circuit conditions, and shall be able to withstand transient or continuous short-circuit conditions without damage to the system.

System may be configured for General Alarm All Call operation, Alarm by Zone or Floor Above / Floor Below as required. Contact closures shall allow immediate broadcast of an alarm signal and evacuation message to the appropriate area. Non-Alarm areas may receive alert tones and messages as required or activated by the FACP.

The alarm signal/evacuation message shall be broadcast until the FACP is reset, or until emergency personnel interrupt the broadcast with a manual page.

To prevent unauthorized tampering, the voice evacuation system shall disable the microphone if the microphone is keyed continuously for 3 minutes or more. Systems that do not have this feature shall not be acceptable.

PAGING CONTROL

SYSTEMRESET

PAGEALL-CALL

FAULTSILENCE

FNV-MPHigh Rise Voice Evacuation System

Master Panel

Features:

Description:



Fully Supervised

The Hochiki FNV High Rise Evacuation System operates in conjunction with the Fire Alarm Control Panel (FACP) in a building to provide automatic response to life safety emergencies.

The Hochiki FNV includes all necessary features to provide an effective voice evacuation system. The Hochiki FNV can be custom configured to satisfy the needs of any high rise application.


The FNV system includes capacity for 6 channels of simultaneous audio. This provides for evacuation, stay-in-place, or other public address announcements and automatic messages.

Fire Fighter Phones or Warden Stations may be included as required. Area-of-Rescue stations can reassure handicapped occupants that help is on the way. Smoke control, stair pressurization, and HVAC shutdown can be completely automatic, unless controlled manually by management or fire authorities.



Master Panel (FNV-MP) Master Mic Control 16 Switch Control points Dual Channel DMR High Speed communication loop

Optional Integrated Master Fire Phone

Area-of-Rescue Fan and Damper system control Maximum System Configuration

Up to 1000 monitor and control points

LISTED


I/OCard

IOI

TB1 TB2

TB1 TB2

TB3 TB4 TB5P1

P2

P3

P4

J1123

LED3LED2LED1

DCC

MFP

P2

ASC

TB1

P3

P1

P2

P5

P5

SSC

SLC2

SLC1

FNV MP64/PMaster Panel

Ribbon Cable Connection Detail

MMC

34 Pin Ribbon

10 Pin Ribbon

20 Pin Ribbon

34 Pin Ribbon

MFI

Components mounted on hinged front panel.Connectors shown are on the back of thecomponents.

SLC4

SLC3

34 Pin Ribbon

Components mounted to back plate inside of cabinet.

PWR-2A

31

2

21

TB2

TB3

TB1321

In the Master Panel system components are mounted to a removable back plate. The door and front panel are removable. This enables field wiring to be installed cleanly.

Connections to the User Interface components ( Switch/LED banks, Mic/System control and Master Fire Phone) is accomplished with ribbon cables. The front panel mounts separately on a continuous hinge so once installed the access for system programming is easily accommodated.

TB1 TB2

TB3 TB4 TB5P1

P2

P3

P4

J1123

LED3LED2LED1

DCC

NetCom Bus(Supervised)

*A - Optional wiring for Style 7 supervision

ASC

TB1

P4

P3

P1

P2

P5

P5

MBR

TB2 TB3 TB4

TB5

TB6

TB7

TB9

1 2 3 4

TB11 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

1 2

3 4

1 2

3 4

DCC

TB1 TB2

TB3 TB4 TB5P1

P2

P3

P4

J1123

LED3LED2LED1

P3

LED1

P2

MFP

OUT TO FIRST DISTRIBUTED PANEL IN FROM PREVIOUS PANEL

RETURN TO MASTERIN FROM LAST PANEL

MASTER PANEL DISTRIBUTED PANEL

P1

NetComm Loop Wiring (Style 4)

TB1 TB2

TB3 TB4 TB5P1

P2

P3

P4

J1123

LED3LED2LED1

DCC ASC

TB1

P4

P3

P1

P2

P5

P5

MBR

TB2 TB3 TB4

TB5

TB6

TB7

TB9

1 2 3 4

TB11 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

1 2

3 4

1 2

3 4

TB1 TB2

TB3 TB4 TB5P1

P2

P3

P4

J1123

LED3LED2LED1

P3

LED1

P2P1

MFP

MASTER PANEL DISTRIBUTED PANEL

NetComm Loop Wiring (Style 7)

Redundant Communication Bus

Primary Communication Bus

The redundant loop must be run in separate conduitwith minimum spacing from the primary. Check localcode requirements.

DCC

Technical Characteristics:

Primary Power: 120 VAC

24 VDC Battery Power

Backbox Dim: 14.5 x 27 x 4“ w h dColor: Charcoal Grey standard Red optional

• •

•

•

80 mA30 mA10 mA25 mA 6 mA45 mA20 mA

Master Panel

DCCASCMFPSSCSLCMMCIOI

Electrical Ratings:All Circuits @ 24VDC. Communications Bus: RS-485 Standard, 1M Baud data rate, Category 5 cable.

Voltage: 5V peak-to-peak max.Current: 50mA max.Impedance: 120 Ohms (max. imp. between panels)Frequency: 1.024MHz

Master Panel Configurations:

FNV-MP16 Master Panel, 16 Switch ControlFNV-MP32 Master Panel, 32 Switch ControlFNV-MP48 Master Panel, 48 Switch ControlFNV-MP64 Master Panel, 64 Switch ControlFNV-MP80 Master Panel, 80 Switch ControlFNV-MP96 Master Panel, 96 Switch Control

FNV-MP16/P Master Panel, 16 Switch Control, Master Fire PhoneFNV-MP32/P Master Panel, 32 Switch Control, Master Fire PhoneFNV-MP48/P Master Panel, 48 Switch Control, Master Fire PhoneFNV-MP64/P Master Panel, 64 Switch Control, Master Fire PhoneFNV-MP80/P Master Panel, 80 Switch Control, Master Fire PhoneFNV-MP96/P Master Panel, 96 Switch Control, Master Fire Phone

80 mA30 mA10 mA25 mA 6 mA45 mA20 mA

Standby Alarm

Panel Options: Cards may be added as job requirements demand

FNV-MFP Master Fire Phone Enables system to incorporate 2 way communication.Included with /P panels.

FNV-SSC Switch Scan Card Included in basic panels, up to 7 additional cards may be added.FNV-SLC Switch LED Card 16 Switch LED Bank, up to 8 per FNV-SSC.

FNV-IOI Input Interface Card One included with basic panel, additional cards give 16 control


Features:

Description:



Fully Supervised

The Hochiki FNV High Rise Evacuation System operates in conjunction with the Fire Alarm Control Panel (FACP) in a building to provide automatic response to life safety emergencies.

The Hochiki FNV includes all necessary features to provide an effective voice evacuation system. The Hochiki FNV can be custom configured to satisfy the needs of any high rise application.


The FNV system includes capacity for 6 channels of simultaneous audio. This provides for evacuation, stay-in-place, or other public address announcements and automatic messages.

Fire Fighter Phones or Warden Stations may be included as required. Area-of-Rescue stations can reassure handicapped occupants that help is on the way. Smoke control, stair pressurization, and HVAC shutdown can be completely automatic, unless controlled manually by management or fire authorities.



Distributed Panel (FNV-DP) 4 Output Zones (may be configured for 8) Dual Channel Audio Interface Dual/Single Channel Amplification Amplifier Options: 25 / 50 / 100W Dual Channel 25 / 50 / 100 / 200W Single Channel

Optional Integrated Fire Phone 4 Circuits expandable to 8 or 12

Area-of-Rescue Fan and Damper system control Maximum System Configuration

Up to 256 Distributed Panels (FNV-DP)

FNV-DPHigh Rise Voice Evacuation System

Distributed Panel

TB1

TB3

TB2

1 2 3 4 5 6 7 8

12345678

123456789

1011

MESSAGEGAIN

MICGAIN

FAULT

NORMAL

ALARM

YEL

GRN

RED

J2

1 2 3

J1

P2

S1SN1

TB1

TB3

TB2

1 2 3 4 5 6 7 8

12345678

123456789

1011

MESSAGEGAIN

MICGAIN

FAULT

NORMAL

ALARM

YEL

GRN

RED

J2

1 2 3

J1

P2

S1SN1

DCC

TB1 TB2

P1

P2

P3

P4

J1123

DCC

MBR

TB2 TB3 TB4

TB5

TB6

TB7

TB8

1 2 3 4

TB11 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

1 2

3 4

1 2

3 4

AM

I

MB

K

FNV-25E FNV-25E

1

8 “B”

4 “A”

LISTED


MBR

TB11TB9

TB8

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

1 2

3 4

P10

P14

P15

P1 P2 P3

TB3P1

DCC

TB1

TB3

TB2

1 2 3 4 5 6 7 8

12345678

123456789

1011

MESSAGEGAIN

MICGAIN

FAULT

NORMAL

ALARM

YEL

GRN

RED

J2

1 2 3

J1

P2

S1SN1

TB1

TB3

TB2

1 2 3 4 5 6 7 8

12345678

123456789

1011

MESSAGEGAIN

MICGAIN

FAULT

NORMAL

ALARM

YEL

GRN

RED

J2

1 2 3

J1

P2

S1SN1

FNV-25E

1 2 3 4

10K EOLR

10K EOLR

10 PIN RIBBON10 PIN RIBBON

MB

K

FP

I

AM

I

SEE FIG. 2 FOR FPI TO MBR CONNECTION DETAILSEE FIG. 3 FOR AMI TO AMPLIFIER CONNECTION DETAIL

FNVDistributed PanelConnection Detail

FNV-25E

Speaker Circuits

Fire

Ph

on

e C

ircu

its

Set EOLR

AMI

10 PIN RIBBONS

This side plugsinto MBR, 1st slot on right

To right sideAmplifier

To left sideAmplifier

FPI

This side plugsinto MBR, 2nd slot on right

MBR J7

TO MBR J7

10 PIN RIBBON

FPI to MBR Connection AMI to Amplifier Connection

MBR

TB2 TB3 TB4

TB5

TB6

TB7

TB8

1 2 3 4

TB1

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

1 2

3 4

1 2

3 4

A M

I

M B

K #

1

4 5 6 7 8321 EOLR

EOLR

EOLR

Standard Life Safety Speakers, Strobes connected and powered separately

EOL

EOL

EOL

M B

K #

2

Eight Class “B” Speaker Lines

1

2

8FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

Second FNV-MBK card provides additional speaker circuitsMay be configured as several options

TB2 TB3 TB4

TB5

1 2 3 4

TB1

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2

3 4

1 2

3 4

4321

Four Class “A” Speaker Lines

FFIIRREE

FFIIRREE

FFIIRREE

FFIIRREE

EOL EOL

Eight Class "B" may also be configured as 4 A / B circuits

Each FNV-DP panel mayhave up to 4 FPI cards fora max. of 16 phone circuits.(Additional FPI cards requirean FNV-FPO for circuit termination)

Each AMI card provides audiochannels and control to twoamplifier modules or amplifierbanks. Maximum configuration is 5 AMI cards in each FNV-DP.(Additional modules would mount inseparate cabinets)

Distributed Panel Configurations:

FNV-DPS25 Distributed Panel, Single Channel, 25WFNV-DPS50 Distributed Panel, Single Channel, 50WFNV-DPS100 Distributed Panel, Single Channel, 100W

FNV-DPS25/P Distributed Panel, Single Channel, 25W, Fire PhoneFNV-DPS50/P Distributed Panel, Single Channel, 50W, Fire PhoneFNV-DPS100/P Distributed Panel, Single Channel, 100W, Fire Phone

FNV-DP25 Distributed Panel, Dual Channel, 25WFNV-DP50 Distributed Panel, Dual Channel, 50WFNV-DP100 Distributed Panel, Dual Channel, 100W

FNV-DP25/P Distributed Panel, Dual Channel, 25W, Fire PhoneFNV-DP50/P Distributed Panel, Dual Channel, 50W, Fire PhoneFNV-DP100/P Distributed Panel, Dual Channel, 100W, Fire Phone

Technical Characteristics:

Primary Power: 120 VAC

24 VDC Battery Power

Backbox Dim: 14.5 x 27 x 4“ w h dColor: Charcoal Grey std Red optional

• •

• •

Electrical Ratings: All Circuits @ 24VDC. Communications Bus: RS-485 Standard, 1M Baud data rate, Category 5 cable.

Voltage: 5V peak-to-peak max.Current: 50mA max.Impedance: 120 Ohms (max. imp. between panels)Frequency: 1.024MHz

Battery Charging: Maximum charging current from FNV-25/50 is 800mA. Maximum battery size is 17AHr.FNV-100 Maximum battery size is 24AHr.

DCCMBRAMIFPI

55 mA10 mA10 mA13 mA

Distributed Panel

Panel Options: Cards may be added as job requirements demand

FNV-MBK Motherboard Relay Card Expands MBR output 8 Class B or 4 Class A speaker circuits

FNV-FPI Fire Phone Interface Card Included in /P panels, up to 3 additional cards may be addedFNV-FPO Fire Phone Output Card Used with additional FNV-FPIs for termination

FNV-AMI Audio Module Interface Card Included with basic panel, additional cards give the ability to control multiple modules or accommodate full 3 channel operation

55 mA55 mA10 mA13 mA

Standby Alarm


Description:

Ordering Information:

Fire Phone accessories give the FNV system two way communication capability.

Fire Phone jacks are mounted on a single gang plate.

Fixed telephone and warden stations are available in Surface/Semi-Flush mount cabinet with a Thumb Turn latch

VoiceNetFire Phone Equipment

Model Number Description

Telephone Jack Brushed Stainless Steel Single Gang Plate

Portable Handset Color - Red (6 mount in FNV-TC cabinet)

Telephone Cabinet Holds 6 FNV-FH Portable Handset Cabinet: Charcoal Gray - std. -R Red (Surface/Semi-Flush Mount / Key Lock 27 x 14-1/2 x 4” h-w-d)

Fire Phone Station Coil cord / Thumb Turn Latch Cabinet: Red (Surface/Semi-Flush Mount 12-3/4 x 7-1/4 x 3-3/4” h-w-d) Warden Station Armored cable / Thumb Turn Latch Cabinet: Red (Surface/Semi-Flush Mount 12-3/4 x 7-1/4 x 3-3/4” h-w-d)

FNV-FSFNV-WS

FNV-FJ

FNV-FH

FNV-TC

LISTED

FNV-TC

FNV-FS

FNV-WS

(Shown with 6 FNV-FH)

FNV-FH

FNV-FJ


FirePhoneLoops

(Supervised)

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

Fire PhoneHandset

Jack

10K 1/2WEOLR

10K 1/2WEOLR

10K 1/2WEOLR

10K 1/2WEOLR

10K 1/2WEOLR

MBR

FPI

TB2 TB3 TB

TB5

TB6

TB7

1 2 3 4

TB11 2 3 4 1 2 3 4 1 2 3 4 1 2

1 2

3 4

1 2

3 4

1 2

3 4

1 2

3 4

FPO

Cards plug into slotsavailable on MBR

10 Pin Ribbon Cable/

First FPI allows 4 Fire PhoneCircuits off of MBR. Adding 2ndFPI and an FPO allows 4additional Fire Phone Circuits(16 circuits max. in any FNV-DP)

To AdditionalFire Phone Circuits

(not shown)

All Fire PhoneCircuits useTwisted Pair

#22 AWG min.

/

7051 Village Drive, Suite 100Buena Park, CA 90621-2268

modular system - components added as needed

Documents