Modular Pump Skids

Main Features

TMI Climate Solutions Inc., a long time manufacturer of Custom Air Handling Systems, offers a complete

line of manufactured Modular Pump Skids as a solution to your climate control needs from our Advanced Hydronics Division.

Elevation and side views of heat transfer skid drawing for Project No. 12064. Project contained base mounted pump, u-tube heat exchanger, air separator, and 100 gal vertical tank for (2) Heat Transfer Skids.

Complete Electrical Switchgear Included

Highly Efficient Variable Speed Pumps

Industrial Controllers Where Required

Hydronic Specialties Including:

- Air Separators

- Expansion Tanks

- Heat Exchangers

- Control Valves

Complete Integration to Plant Facility Management via Lon or

BACnet

3D Cad Modeling for Direct Integration

Custom Configurations for Tight Spaces in Equipment Rooms

Enclosures for Outdoor Requirements as Needed

Insulation as Required

From start to finish, any Modular Pump Skid takes approximately 16-20 weeks to design, procure, manufacture, and install with proper coordination. You, as the customer, have control over major equipment vendors including the pumps, tanks, and electrical gear. With the integration of the industrial grade controls, the customer receives a system equal to or better than a traditional field built pumping system.

TMI Climate Solutions

Headquarters: 200 Quality Way • Holly, MI 48442 • Southwest Regional Office: 12033 Highway 6 Ste. 500 • Fresno, TX 77545

P: 888-727-8772 • F: 810-694-5804 • tmiclimatesolutions.com

Our Modular Pump Skids are completely manufactured at the TMI facility in Holly, Michigan. This allows for minimal disruption to any jobsite as the Pump Skid Modules are manufactured off-site, and then installed in place at any facility in less than a week. The final fit and finish of the Modular Pump Skids can be completed by the TMI Construction Services team or your local installer inside of the mechanical equipment room as needed.

TMI 3D drawing of Pump skid.

Pipe Connection

Size

Total System

Flow

Option - # of

Pumps

Option -

Pump HP Overall Dimensions

L" x W" x H"

4" 400 2,3 10-30 114" x 84" x 72"

6" 900 2,3 20-60 114" x 84" x 84"

8" 1250 3 25-75 150" x 114" x 84"

1600 3 40-100 150" x 114" x 84"

10" 2050 3 50-100 150" x 114" x 102"

2500 3 50-100 150" x 114" x 102"

12" 3000 3,4 50-100 162" x 132" 102"

3500 3,4 50-100 162" x 132" 102"

14" 3850 3,4 75-100 162" x 132" 102"

4200 3,4 75-125 162" x 132" 102"

Modular Pump Skid Standard Configurations