modular matting system connect

First impressions count, so protect your entrance area with the new CONNEXX CONNECT modular matting system. Keep floors looking clean and tidy and don’t give dirt a chance!

CONNEXX offers easy, clean and flexible system solutions for eve-ry entrance area – inside and outside. With minimum effort, the clean-off zone can be overlaid with modules, which can be perfectly adapted to your specific requirements and design. Different versions allow you to adapt the product depending on how it is to be used. In terms of design, the entrance mats are adapted to the environ-ment and the combination of different colours allows individual patterns to be applied.The safety knife makes easy work of cutting, enabling the personal touch to be added in no time at all, CONNECT can be installed into any shaped matwell or entrance area just using a safety knife, straight edge and rubber hammer.

Dirt remains trapped within the matting keeping the inside as clean as possible. This is CONNECT easy – effective – flexible.

Easy – Effective – Flexible

easy effective

flexible

2

1

3

5

6

4

Make it your very own Use a sharp knife to cut out custom shapes

Simply cut off any excess modules

Installation Make sure the floor is level and clean

Use a rubber hammer to connect the units together

Cleaning and care Vacuum-brush

Pattern & Design Design individual patterns by combining mats of different colours

Available in 8 dirt-resistant colours

Outside & Inside Solution for indoor and outdoor areas

�Outside, coarse dirt is removed and inside, damp dirt and residual dirt is collected

Easy to store The mats are delivered stacked in boxes, each of which will cover an area of 1 m2

Storage without sacrificing space

At a glance

With CONNEXX, you can turn an entrance area into a clean-off area in no time at all – in an indoor area or outdoor area or both areas combined. Providing the entrance area with optimum protection against dirt and moisture.

Individually or combined

Zone 1 The outdoor mat for the outdoor area collects large amounts of coarse dirt thanks to its perforated structure. The design also guarantees that the moisture runs off. The outdoor mat can be cut to specific sizes just like the indoor mat, allowing it to be adapted to the spatial conditions.

Zone 1 + 2 When combined, the indoor and outdoor modules provide maxi-mum effectiveness and the visual freedom to create the design you want. If required, the outdoor modules can also be com-bined with the indoor modules for indoor areas (only at a height of 17 mm).

Zone 2 In zone 2, the wear-resistant indoor mat with a textile inlay effec-tively protects the entrance area against fine dirt and moisture.

CombinationsWhen creating the design, all the available colours can be free-ly combined. It is also possible to apply a chessboard pattern, grid design or uniform surfaces.

Installation – Step by step

Delivery CONNECT modules are delivered in boxes (1 box = 16 modules = 1 m2). They are stacked to save space, so that any items you do not use can easily be put into storage until a later date. Note: Colours may differ from one production batch to the next. Goods purchased at different times should be stored and laid separately.

Connection Simply connect the required number of tiles together to cover the floor with the CONNECT system. Use a rubber hammer to secure up the joins if necessary. No other tools are required.

Taking shape Use a straight edge and a sharp knife (safety knife) to cut the CONNECT modules to the required shape. Simply cut off excess matting and adapt the clean-off zone to the shape of the installa-tion frame.

Start & finishWhen installing the matting, start in the centre and work out towards the sides. Ensure that the mat is big enough by laying it over the area to be covered, leaving a generous overlap on all sides. Then mark the cutting edges and cut to size with the safety knife. The result couldn’t look or fit better!

TIP: To avoid shrinkage (in the event of signifi-cant temperature fluc-tuations, for example), complete the instal-lation by bonding the modules to the floor.

CONNEXX CONNECT is ideal if you like the personal touch. As well as being easy to cut (so you can fit them to whatever shape you like), the CONNECT modules are available in 2 different insert types. Each insert type comes in 4 different colours, so there’s bound to be a perfect match for your architectural concept.

Flexibility in terms of both function and colour

The substrate material of the modular CONNECT modules is made from soft PVC (black matt). Each module has three panels for Focus or Maximus type inserts.

The substrate material of the modular CONNECT modules is made from soft PVC (black matt). Grooves on the bottom of the mat drain any moisture that accumulates.

Appr

ox. 2

60 m

m (i

n re

ality

app

rox.

250

mm

)Ap

prox

. 260

mm

(in

real

ity a

ppro

x. 2

50 m

m)

Direction

of traffic

Direction

of traffic

Approx. 250 mm

Approx. 250 mm

Approx. 55 mm

Appr

ox. 1

7 m

m 12 mm | 17 mm (16 pieces)

17 mm (16 pieces) Outdoor

Height Weight m2 Stationary load Slip resistance properties Footfall

12 mm 9,8 kg1000 kg/100 cm2 R11 High, up to 2000

per day17 mm 12,0 kg

Weight m2 Footfall

11,2 kg High, up to 2000 per day

Appr

ox. 1

7 m

m Approx. 55 mm

Appr

ox. 1

2 m

m

Maximus

Frame 500

Ramp Edge for CONNECT 12

Maximus is a tufted velour cut pile clean off matting system using 100% polyamide with a pile weight of 1000g/m2. It is dimensionally stable, abrasion proof, achieves optimum cleaning performance while containing high levels of moisture.

Grey mottled 81.03Black mottled 81.01 Brown mottled 81.04 Blue 80.06

Focus is a durable clean off matting system with a high performance structured dual fibre using 100% polyamide with a pile weight of 1030g/m2. The coarse fibre brushes away the dirt while the finer fibres contains the moisture. Focus is suitable for areas with very high footfall.

Focus

Red 25.04Brown 25.03Anthracite 25.01 Grey 25.02

The frame 500 consist of angled profiles with mitred corners. The sturdy gusset plates supplied ensure a screw connection that is true to size. Products available for delivery includes wall anchors; stainless steel versions for use in damp areas are available as an option. The frame is supplied either ready for assembly or preassembled (e.g. in the case of frames with curved sections or several sections, etc.).

500 aluminium 500 in stainless steel

With its gradient, the ramp edge (with a profiled tread surface made from soft PVC) guarantees stumble-free access onto the mat. If the floor is a homogenous PVC/vinyl base, the mat must be laid so that it is securely fastened to the floor.

Type M height Dimensions (H x W x D) in mm Material

500 / 13 12 mm 15,5 x 25 x 3 Aluminium

500 / 20 17 mm20 x 30 x 3 Aluminium

20 x 25 x 3 Stainless steel*

Maximun one-piece length: 2200 mm *Material no. 1.4301 (V2A)

UK

855-

4559

/ 0

7.14

– Te

chni

cal c

hang

es re

serv

ed

Toveri Pals General Trading Company

Kuwait, Shuwaikh, Free Trade Zone, Block 1, Plot 35, 2nd Floor

Tel: +965 5664-7575 / 76

P.O. Box: 5711, Safat. Kuwait 13058

E: info@toveripals.com W: www.toveripals.com