Modric Washroom Operation and Maintenance Manual

CI/SfB Xt7

In accordance with Regulation 38 of the Building Regulations 2010, this document is supplied to provide operation and maintenance information for the products supplied to your project by Allgood plc.

This document should be passed to whoever is taking responsibility for assembling the Fire Safety Information file for the building.

Contents

Washroom panels Page 3

Hand dryers Page 5

Paper towel dispenser and Waste bin Page 7

Toilet roll holders Page 8

Toilet brush holders Page 9

Soap dispenser Page 10

Soap tray, Shampoo tray and Towel rails Page 11

Page 12

Page 13

Grab and Backrest rails

Care of finishes

Fig.1

Washroom panels operations

weekly checks

• If the panel door hasdropped and you needto realign the panel doorposition, turn the screw(fig.2) to the desired positionuntil the door sits flush intothe panel.

• If the panel door hasbecome tight and difficultto open/close adjust the ballcatch accordingly (see fig.3).

• If panel door has becomeloose tighten screw on hinge(see fig.4)

For maintenance details of the washroom hand

dryers please refer to page 5.

Fig.2

Fig.3 Fig.4

monthly checks

• When cleaning thestainless steel hand dryerfascia, check for dirt andgrease and wipe clean asdirected in the ‘Care offinishes’ section (page 13).

• To open the Washroompanel, insert the Modric keysupplied into the concealedlock (see fig.1).

Washroom panels maintenance

Fig.5 Fig.6

weekly checks

The Modric washroom panels were designed with the end user in mind, making refilling an cleaning easy.

• When refilling thepapertowel dispenser, fillfrom the top (fig.5)

• Remove dust, fluff and anyother build up of foreignmatter from the inlet andoutlet grille areas (fig.6)

• When emptying the bin,remove the bin receptacle bylifting from the panel casingand dispose as necessary.

Hand dryers

The hand dryer MUST be isolated from the power supply during installation or maintenance.

• When cleaning thestainless steel hand dryerfascia, check for dirt andgrease and wipe clean asdirected in the ‘Care offinishes’ section (page 13).

• Remove dust, fluff and anyother build up of foreignmatter from the inlet andoutlet grille areas (fig.7)

• Clean and check the sensorarea is clear of obstruction,removing any obstructingmatter if required.

• If there is movement inthe hand dryer unit on thewall check that the fixingsare tight. If the hand dryerbecomes loose, please tightenthe relevant fixings (fig.8).

• If after completion of theabove checks the Modricsurface mounted hand dryeris not working satisfactory,please contact Allgoodon 020 7387 9951

Fig.7 Fig.8

weekly checks

monthly checks

Fig.7

Motor runs but no heat

Contact Allgood

Clear if necessary

Check sensor is clear of obstruction

Motor runs but no airflow

Contact Allgood

Check grilles are clear of obstruction

Motor runs does not run

Check mains supply is on

Check wiring

Replace fuse

Has fuse blown?

YES

YES

NO

NO

Performance satisfactory?

Service complete

START

Hand dryers

The hand dryer MUST be isolated from the power supply during installation or maintenance.

Paper towel dispenser and Waste bin

• When cleaning thestainless steel paper toweldispenser and bin fascia,check for dirt and greaseand wipe clean as directed inthe ‘Care of finishes’ section(page 13).

• When refilling the papertowel dispenser, pull frontfascia forward (fig.10) and fillfrom the top (fig.11).

• When emptying the bin,remove the bin receptacle bylifting from the panel casingand dispose as necessary(fig.12).

• If the bin has becomeloose check that the fixingsare tight and that there is nomovement on the bin. If theitems are loose, please tightenthe relevant fixings (fig.9).

Fig.9 Fig.10

Fig.11 Fig.12w

eekly checks

monthly checks

Fig.5

Toilet roll holders

• When cleaning thestainless steel toilet rollholder, check for dirt andgrease and wipe clean asdirected in the ‘Care offinishes’ section (page 13).

• If the toilet roll holder hasbecome loose check thatthe fixings are tight and thatthere is no movement on thebracket or fixings to the wall.If the items are loose, pleasetighten the relevant fixings(fig.13).

• To access the fixings ofthe single and double toiletroll holder, remove holderby unscrewing the end cap(fig.14) and slide holder out ofthe bracket. Then tighten thefixings as necessary (fig.15).

Fig.13 Fig.14

weekly checks

monthly checks

Fig.14

Fig.15

Fig.5 Fig.6

Toilet brush holder

• When cleaning thestainless steel toilet brushholder, check for dirt andgrease and wipe clean asdirected in the ‘Care offinishes’ section (page 13).

• The brush and liner need tobe cleaned by removing fromthe holder (fig.19).

Fig.16 Fig.17

Fig.18 Fig.19

• If the toilet brush holderhas become loose checkthat the fixings are tight andthat there is no movement onthe bracket or fixings to thewall. If the items are loose,please tighten the relevantfixings (fig. 16 & 17).

• If the toilet brush becomesloose from the handle,tighten by rotating clockwise(fig. 18).

weekly checks

monthly checks

Soap dispenser

• When cleaning thestainless steel soapdispenser check for dirtand grease and wipe cleanas directed in the ‘Care offinishes’ section (page 13).

• To refill the soap dispenser,remove the sleeve by insertingthe Modric key supplied(fig.20) turning anti-clockwiseand lifting the sleeve off(fig.21 ). Remove the plasticcap (fig.22) and pour soapinto the dispenser.

Fig.20 Fig.21

Fig.22 Fig.23

• If the dispenser hasbecome loose, check thatthe fixings are tight and thatthere is no movement on thecap bracket or fixings to thewall. If the items are loose,please tighten the relevantfixings (fig.17).

weekly checks

monthly checks

Soap tray, Shampoo tray and towel rails

• When cleaning the stainlesssteel soap, shampoo traysand towel rails, check fordirt and grease and wipeclean as directed in the ‘Careof finishes’ section (page 13).

Fig.24 Fig.25

• If the trays or rails becomeloose, check that the fixingsare tight and that there isno movement on the fixingsto the wall. If the items areloose, please tighten therelevant fixings (fig.24 and25).

Modric Soap, Shampoo tray and towel rails are all manufactures in the UK from grade 316 stainless steel.

weekly checks

monthly checks

Grab and Backrest rails

• When cleaning thestainless steel grab andbackrest rails, check for dirtand grease and wipe cleanas directed in the ‘Care offinishes’ section (page 13).

Fig.26 Fig.27

Fig.28 Fig.29

• If the rails become loose, check that the fixings aretight and that there is nomovement on the fixingsto the wall. If the items areloose, please tighten therelevant fixings (fig.26-29).

weekly checks

monthly checks

Satin Stainless Steel Polished Stainless SteelWipe clean with a medium strength detergent or white spirit using a soft cloth or sponge. Rinse and dry with a dry soft cloth. In the event of dirt having accumulated through neglect, application of aerosol lubricant prior to standard cleaning is recommended. A harsh brush should never be used.

Finish prefixes: SS • ST

Wipe clean with a medium strength detergent or white spirit using a soft cloth or sponge. Rinse and dry with a dry soft cloth. In the event of dirt having accumulated through neglect, application of aerosol lubricant prior to standard cleaning is recommended. A harsh brush should never be used.

Finish prefixes: PS • SP

Care of finishes

Proud distributors of Modric for 26 years

modric Inc,National Headquarters for North America,P.O.Box 1639ArbolesColorado 81121t. 800-739-0202f. 800-813-2128e. Info@modric.net

www.modric.com