model(s) affected revision description · 2021. 1. 29. · rg80 stump cutter added the tr100l...
TRANSCRIPT
Model(s) Affected Revision DescriptionEB 1418 Added Isuzu 70-HP engine with over center clutchEB 1418 Removed Caterpillar 122.5-HP engineEB 1418 Removed Perkins 122.5-HP engineEB 1418 Added PSI 75-HP engine with centrifugal clutchEB 1215 Added Isuzu 48-HP engine with over center clutchEB 1215 Added Isuzu 48-HP engine with centrifugal clutchEB 1215 Added Isuzu 70-HP engine with over center clutchEB 1215 Added PSI 75-HP engine with centrifugal clutchEB 1415 Added Isuzu 70-HP engine with over center clutchEB 1415 Added PSI 75-HP engine with centrifugal clutchEB 1415 Removed Caterpillar 122.5-HP engineEB 1415 Removed Perkins 122.5-HP engineEB 1821 Removed PSI 145-HP engineEB 1821 Added GM 165-HP engine as standardEB 1821 Added Ford 165-HP engineEB 1821 Track Removed GM 165-HP engineEB 1821 Track Added Caterpillar 174-HP engine as standardEB 1821 Track Removed John Deere 140-HP engineEB 1821 Track Removed Caterpillar 147-HP engineEB 1821 Track Removed Perkins 147-HP engineEB 1922 Added Ford 165-HP engineEB 1922 Added Isuzu 188-HP engineEB 2131-SA Added Ford 165-HP engineEB 2131-SA Added Isuzu 188-HP engineEB 2131-TA Removed Caterpillar 174-HP engine from standard and made it an optionEB 2131-TA Added Isuzu 188-HP engine and made it the standad engineEB 2230 Removed Caterpillar 335-HP engineEB 2230 Added John Deere 350-HP engine as standardEB 2230 with infeed deck Removed Caterpillar 335-HP engineEB 2230 with infeed deck Added John Deere 350-HP engine as standardEB 2230 Loader Removed Caterpillar 335-HP engineEB 2230 Loader Added John Deere 350-HP engine as standardEB 2230 Track Removed Caterpillar 335-HP engineEB 2230 Track Added John Deere 350-HP engine as standardRM27 Removed as this model is discontinuedRG55 Trac Jr Removed handheld remote controlAll pages FOB Factory or FOB Winn, MI has been replaced with "F.O.B.
EB812Updated standard description of 10-gallon hydraulic reservoir to include a site gauge and not "with dipstick to check oil level"
EB1418Updated standard description of 10-gallon hydraulic reservoir to include a site gauge and not "with dipstick to check oil level"
EB1418 Added 800CCA battery to Isuzu 70-HP engine descriptionEB1418 Added a Maintenance kitEB1418 Updated description of centrifugal clutch to read "Morbark ZeroClutch"EB1418 Added "interlock device" to winch package and updated priceEB1418 Removed "Engine stop on infeed" optionEB1215 Updated description of centrifugal clutch to read "Morbark ZeroClutch"EB1215 Added 800CCA battery to Isuzu 70-HP engine descriptionEB1215 Added a Maintenance kitEB1415 Added 800CCA battery to Isuzu 70-HP engine descriptionEB1415 Updated description of centrifugal clutch to read "Morbark ZeroClutch"EB1415 Removed "Engine stop on infeed" option
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
EB1415 Added a Maintenance kitEB1415 Added "interlock device" to winch package and updated priceEB1415 Track Removed until engine replacements can be identified and engineeredEB1621 Removed and replaced with 1621XEB1621X Added Eeger Beever 1621X to replace 1621EB1821 Added 800CCA battery to Ford 165-HP engine descriptionEB1821 Added a Maintenance kitEB1821 Removed "Engine stop on infeed" optionEB1821 Added "interlock device" to winch package and updated priceEB1821 Track Added a Maintenance kitEB1821 Track Removed Super Trapp muffler - no gas engines are offeredEB1821 Track Added "interlock device" to winch package and updated priceEB1821 Track Removed "Engine stop on infeed" optionEB1922 Removed Isuzu 188-HP engine due to weightEB1821 Added 800CCA battery to Ford 165-HP engine descriptionEB1922 Added a Maintenance kitEB1922 Added "interlock device" to winch package and updated priceEB1922 Removed "Engine stop on infeed" optionEB2131-SA Removed Isuzu 188-HP engine due to weightEB2131-SA Added 800CCA battery to Ford 165-HP engine descriptionEB2131-SA Added a Maintenance kitEB2131-SA Added "interlock device" to winch package and updated priceEB2131-SA Removed "Engine stop on infeed" optionEB2131-TA Added a Maintenance kitEB2131-TA Added "interlock device" to winch package and updated priceEB2131-TA Removed "Engine stop on infeed" optionEB2131 Loader Added a Maintenance kitEB2131 Loader Added "interlock device" to winch package and updated priceEB2131 Loader Removed "Engine stop on infeed" optionEB2131 Track Added a Maintenance kitEB2131 Track Added "interlock device" to winch package and updated priceEB2131 Track Removed "Engine stop on infeed" optionEB2230 Removed "Engine stop on infeed" optionEB2230 with Infeed Deck Removed "Engine stop on infeed" optionTR100 Trailer with Brakes Corrected the model name to be TR100L
RG 13 Series-II Stump CutterAdded EEC kit to base description as "European compliant" - removed under options - no change in base price
RG 25HD Stump CutterRemoved "Auxiliary Chip Retainers" as a separate option and added description to EEC kit - no change in EEC kit price
RG27 Stump Cutter (SOC) Added a Maintenance kitRG37 Super Jr. Stump Cutter (SOC) Moved pintle hitch option below trailer optionRG37 Super Jr. Stump Cutter (SOC) Added a Maintenance kitRG37 Trac Jr. Stump Cutter Moved pintle hitch option below trailer optionRG37 Trac Jr. Stump Cutter Added a Maintenance kitRG55 Super Jr. Stump Cutter (RRC) Changed the tire quantity from four to six
RG55 Super Jr. Stump Cutter (RRC)Added EEC kit to base description as "European compliant" - removed under options - no change in base price
RG55 Super Jr. Stump Cutter (RRC) Added a Maintenance kitRG55 Super Jr. Stump Cutter (SOC) Changed the tire quantity from four to six
RG55 Super Jr. Stump Cutter (SOC)Added EEC kit to base description as "European compliant" - removed under options - no change in base price
RG55 Super Jr. Stump Cutter (SOC) Added a Maintenance kit
RG55 Trac Jr. Stump Cutter (RRC)Added EEC kit to base description as "European compliant" - removed under options - no change in base price
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
RG55 Trac Jr. Stump Cutter (RRC) Added a Maintenance kitRG80 Stump Cutter Changed the tire quantity from six to eightRG80 Stump Cutter Changed description from dual rear only to dual front and rear
RG80 Stump CutterAdded EEC kit to base description as "European compliant" - removed under options - no change in base price
RG80 Stump Cutter Added the TR100L Trailer and options under the "options" sectionRG80 Stump Cutter Added a Maintenance kit
RG74T-R Stump CutterAdded EEC kit to base description as "European compliant" - removed under options - no change in base price
RG74T-R Stump Cutter Added a Maintenance kit
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣♣♣
♣♣
♣♣
♣♣♣♣♣♣♣♣
♣RETAIL
♣ $ 24,670.00
RETAIL♣ $ 130.00 ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 415.00
♣ $ 415.00 ♣ $ 2,035.00
NOTE: If the ChipSafe® option has not been selected, it can be installed later
1000# tongue jack with castor wheel
Manuals: complete, additional set of Morbark and OEM (English only)
Pusher paddle with mount
Custom Options (60 - 90 days)
Amber strobe light
2500# Torflex axle with 185R14 tires with rims and hexagon splash guard fenders
Lockable steel battery box with 8D, 1400CCA battery and steel tool box
3" x 4" tubular steel fixed drawbar with 2" ball coupler and 3/8" thick safety chains with clasp hooks
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights and license plate holder with light
2-1/2" pintle ring in lieu of standard 2" ball coupler
Direct drive chipper disc with belt power transfer
Bolt on Options
Bottom bump barF.O.B. Shipping Point
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
10-gallon hydraulic reservoir complete with shut off valve, drain plug, clean-out cover, site gauge, and vented filter head assemblyBelt driven hydraulic pump drive
Morbark orange urethane paint system
2020 MORBARK EEGER BEEVER™ 812 (formerly known as M8D)
NOTE: Not available with the variable speed flow control
2500# Torflex axle with electric brake system, electric break away actuator and 185R14 tires and rims
Manuals: additional set of Morbark only (English only)
Automatic feed system
Variable speed flow control
10-gallon lockable fuel tank with sight gauge, drain plug and shut-off valve
Single (top) hydraulic feed wheel compression system equipped with extended knife bars past end caps with spring assisted down pressure
Briggs & Stratton/Vanguard 37-HP gasoline engine
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Registration and operator guide holder
Manual swivel discharge chute with 360° rotation, multiple locking positions and adjustable flipper end
Quote No.
STANDARD UNIT:
2” x 4” tubular steel frame with cross bracing for additional structural rigidity
EQUIPMENT AND OPTIONS
Infeed with folding tray and control handle to actuate feed wheels and dual safety pull cables
28” diameter x 1-1/4” thick chipper disc with two (2) 10-1/2" x 4" x 3/8" dual-edged chipper knives and four (4) full length, bolt-on, chip throwing paddles
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣♣♣
♣
♣ RETAIL♣ $ 38,035.00
RETAIL ♣ $ 10,000.00
♣ $ 7,750.00
♣ $ 8,750.00
♣ $ -
♣ $ 260.00 ♣ $ 260.00 ♣ $ - ♣ $ 235.00 ♣
$ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ 700.00$ ♣ 210.00$ ♣ 225.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ 1,030.00$ ♣ 310.00$
Amber strobe light
Caterpillar C3.4F, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
Bolt on Options
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
POWER OPTION:
STANDARD UNIT:
♣
2020 MORBARK EEGER BEEVER™ 1418 (formerly known as M12D)
More aggressive top feed wheel with deeper lug serrated teeth and height comparable knife barsInfeed with folding tray and control handle to actuate feed wheels and dual safety pull cablesMorbark orange urethane paint system
37” diameter x 2” thick staggered knife chipper disc with (4) 1/2" x 5" x 7-1/4" dual-edged knives and four (4) fulllength, bolt-on, chip throwing paddles
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
EQUIPMENT AND OPTIONS
Quote No.
24-1/2-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve
♣
Registration and operator guide holder
6" x 4” tubular steel fixed length drawbar, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chainswith clasp hooks
♣
♣
Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack
Isuzu 4JJ1T, Tier 4F, 70-HP diesel engine with over center clutch in lieu of standard in lieu of standard engine and 800CCA battery in lieu of 950CCA
PSI 2.4L, 75-HP gasoline engine with Morbark ZeroClutch (centrifugal) in lieu of standard
♣
7,000# Torflex axle, electric brakes and break-away actuator with 235/80R x 16" radial tires and hexagon splashguard fenders
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights,and license plate holder with light
Cone holder, lockable to hold (10) 28" long traffic cones
Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
Maintenance Knife Kit (P/N 29834-804) includes (4) knives, (12) bolts and (12) nuts
Lockable steel battery box with 950CCA battery and steel tool box5000# side wind tongue jack with stationary foot pad
Rubber infeed curtain
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Pusher paddle with mount
9-gallon hydraulic reservoir complete with shut-off valve, drain plug, clean-out cover, site gauge, and vented filterhead assembly
NOTE: If the ChipSafe® option has not been selected, it can be installed later
Live hydraulics; ball valve, pump, motor, and one control valve
6-round prong connector cable in lieu of standard 7-pin connector
PSI 2.4L, 75-HP gasoline engine with automotive style clutch
Dual feed stops on infeed
NOTE: Not available with the variable speed flow control
8.2#, 6” channel frame rails with cross bracing for additional structural rigiditySwivel discharge chute with 360° rotation and adjustable flipper end to deflect chips
Kohler KDI 2504, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
2" ball hitch in lieu of standard 2-1/2" pintle ring
Chocks and chock holders (complete set of 2)
Electronic fuel gauge located near control panel
2-5/16” ball towing hitch lieu of standard 2-1/2" pintle ring
Reversing auto feed system only
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 1418 (formerly known as M12D)
Quote No.
♣ 545.00$ ♣ $ 310.00 ♣ 415.00$ ♣ $ 5,450.00
RETAIL♣ 515.00$ ♣ 2,035.00$ ♣ 415.00$ ♣ 980.00$
Bottom bump bar
F.O.B. Shipping Point
Discharge with turnbuckle for height adjustment and bottom clean-out door in lieu of standard discharge
Spare 235/80R x 16" tire and rim
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Spare tire mountVariable speed flow control
Custom Options (60 - 90 days)
Hydraulic lift assist only
360 degree manual crank
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣♣♣
♣♣♣♣♣
♣♣♣♣
♣
RETAIL♣ $ 34,390.00
RETAIL♣ $ 6,250.00 ♣ $ 6,250.00 ♣ $ 10,000.00
♣ $ 7,750.00
♣ $ 8,750.00
♣ $ -
RETAIL♣ $ 260.00 ♣ $ - ♣ $ 235.00 ♣
$ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 620.00 ♣ 119.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00
Folding infeed tray (1500 mm) with spring lift assist
Manuals: additional set of Morbark only (English only)
Maintenance Knife Kit (P/N 29834-799) includes (2) knives and (8) bolts
2" ball hitch in lieu of standard 2-1/2" pintle ring
Pusher paddle with mount
Manuals: complete, additional set of Morbark and OEM (English only)
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of bootstraps
Chocks and chock holders (complete set of 2)
NOTE: Not available with the variable speed flow control
Amber strobe light
NOTE: If the ChipSafe® option has not been selected, it can be installed later.
♣
Cone holder, lockable to hold (10) 28" long traffic cones
Bolt on Options
Caterpillar C3.4F, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
PSI 2.4L, 75-HP gasoline engine with automotive style clutch
6-round prong connector cable in lieu of standard 7-pin connector
Kohler KDI 2504, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
PSI 2.4L, 75-HP gasoline engine with Morbark ZeroClutch (centrifugal) in lieu of standard
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights,and license plate holder with light
♣ Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which alsoincludes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperworkEnclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Isuzu 4LE2T, Tier 4F, 48-HP diesel engine with Morbark ZeroClutch (centrifugal) in lieu of standardIsuzu 4JJ1T, Tier 4F, 70-HP diesel engine with over center clutch in lieu of standard engine and 800CCA battery in lieu of 950CCA
Isuzu 4LE2T, Tier 4F, 48-HP diesel engine with over center clutch in lieu of standard
Reversing automatic feed system
Swivel discharge chute with 360° rotation and adjustable flipper end to deflect chips8.2#, 6" channel frame with cross bracing for additional structural rigidity
♣ 5" x 3" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
♣ 7,000# Torflex axle, electric brakes, break-away actuator with 235/80R x 16" radial tires and hexagon splash guard fenders
♣
24-1/2-gallon lockable fuel tank with drain plug and sight gauge
Registration and operator guide holder
POWER OPTION:
Morbark orange urethane paint system
Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack
5000# side wind tongue jack with stationary foot padLockable steel battery box with 950CCA battery
21-3/8” diameter x 14-1/2" wide staggered knife pocket drum with two (2) dual-edged chipper knives and dual sided chambered air impeller system
Top horizontal feed wheel equipped with serrated teeth and knife bars
17-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out coverLive hydraulics; ball valve, pump, motor and control valve
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesSingle horizontal feed wheel compression system with spring assisted down pressure
2020 MORBARK EEGER BEEVER™ 1215 (formerly known as M12RX)
EQUIPMENT AND OPTIONS
STANDARD UNIT:
Quote No.
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 1215 (formerly known as M12RX)
Quote No.
♣ $ 310.00 ♣ 545.00$ ♣ $ 310.00
♣ $ 2,035.00
Rubber infeed curtainSpare 235/80R x 16" tire and rim
Custom Options (60 - 90 days)Bottom bump bar
F.O.B. Shipping Point
Spare tire mount
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣
♣
♣♣♣♣♣
♣♣♣
♣
RETAIL♣ $ 41,870.00
RETAIL♣ $ 10,000.00
♣ $ 3,370.00 ♣
$ 7,750.00
♣ $ 8,750.00
♣ $ -
RETAIL♣ $ 260.00 ♣ $ 260.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 700.00 ♣ $ 210.00 ♣ $ 620.00 ♣ 119.00$ ♣ $ 500.00 ♣ $ 175.00
Maintenance Knife Kit (P/N 29834-799) includes (2) knives and (8) bolts
Chocks and chock holders (complete set of 2)Cone holder, lockable to hold (10) 28" long traffic cones Dual feed stops on infeed
♣
NOTE: Not available with the variable speed flow control
PSI 2.4L, 75-HP gasoline engine with Morbark ZeroClutch (centrifugal) in lieu of standard
Electronic fuel gauge located near control panel
2-5/16” ball towing hitch in lieu of standard 2-1/2" pintle ring
Isuzu 4JJ1T, Tier 4F, 70-HP diesel engine with over center clutch in lieu of standard engine and 800CCA battery in lieu of 950CCA
Manuals: additional set of Morbark only (English only)
Caterpillar C3.4F, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
NOTE: If the ChipSafe® option has not been selected, it can be installed later.
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of bootstraps
Folding infeed tray (1500 mm) with spring lift assist
Registration and operator guide holder
7,000# Torflex axle, electric brakes, break-away actuator with 235/80R x 16" radial tires and hexagon splash guard fenders
PSI 2.4L, 75-HP gasoline engine with automotive style clutch
Manuals: complete, additional set of Morbark and OEM (English only)
2" ball hitch in lieu of standard 2-1/2" pintle ring
6-round prong connector cable in lieu of standard 7-pin connector
Lockable steel battery box with 8D, 1400CCA battery and steel tool box
♣
♣
Morbark orange urethane paint system
21-3/8” diameter x 14-1/2" wide staggered knife pocket drum with two (2) dual-edged chipper knives and dual sided chambered air impeller system
Dual horizontal feed wheel compression system with hydraulic lift assist, spring assisted down pressure and manually applied hydraulic down pressure at the valve handleReversing automatic feed system
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which alsoincludes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Manual crank swivel discharge chute with 360° rotation, bottom clean-out door and adjustable flipper
17-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out cover
5000# side wind tongue jack with stationary foot pad
EQUIPMENT AND OPTIONS
♣
Quote No.
♣
Live hydraulics; ball valve, pump, motor and control valve
POWER OPTION:
Bolt on Options
5" x 3" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
8.2#, 6" channel frame rails with cross bracing for additional structural rigidity
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Amber strobe light
Kohler KDI 2504, Tier 4F, 74-HP diesel engine with automotive style clutch and block heater in lieu of standard (Limited Supply)
PSI 4.X, 145-HP gasoline engine with automotive style clutch in lieu of standard
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights and license plate holder with light
STANDARD UNIT:
24-1/2-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve
2020 MORBARK EEGER BEEVER™ 1415 (formerly known as M12R)
♣
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Quote No.
2020 MORBARK EEGER BEEVER™ 1415 (formerly known as M12R)♣ $ 260.00 ♣ $ 310.00 ♣ 545.00$ ♣ $ 310.00 ♣ $ 335.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Bottom bump bar
Turnbuckle for discharge height adjustment Variable speed flow control
Spare tire mountSpare 235/80R x 16" tire and rim
Custom Options (60 - 90 days)
Rubber infeed curtainPusher paddle with mount
F.O.B. Shipping Point
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣
♣♣ RETAIL
♣ $ 49,900.00
RETAIL♣ $ 24,710.00
♣ $ 23,680.00 ♣ $ 23,680.00
RETAIL♣ $ 260.00 ♣ $ 260.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 700.00 ♣ $ 210.00 ♣ $ 620.00 ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 825.00 ♣ $ 310.00
Quote No.
2020 MORBARK EEGER BEEVER™ 1621X
EQUIPMENT AND OPTIONS
STANDARD UNIT:Morbark orange urethane paint systemInfeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesDual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, spring assisted down pressure and manually applied hydraulic down pressure at the valve handleReversing automatic feed system
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
30” diameter x 23-3/4" wide, four (4) knife staggered knife pocket drum with removable knife holders and dual sided chambered air-impeller system 32-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve12-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out coverLive hydraulic system including: ball valve, pump, motor, and valve bank with additional valve section for installation of winch packageManual crank swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper8.2#, 6" channel frame with cross bracing for additional structural rigidity
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustmentTrailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights, and license plate holder with lightPSI 4.X, 145-HP gasoline engine with automotive style clutch
POWER OPTION:
5" x 3" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks10,000# Torflex axle, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders5,000# jack with stationary foot padLockable steel combination tool and battery box compartment with 8D, 1400CCA battery Registration and operator guide holder
John Deere 4045HFC04, Tier 4F, 140-HP diesel engine with over center clutch and block heater in lieu of standardCaterpillar C4.4, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard Perkins 1204E, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Bolt on Options2" ball hitch in lieu of standard 2-1/2" pintle ring2-5/16” ball towing hitch in lieu of standard 2-1/2" pintle ring6-round prong connector cable in lieu of standard 7-pin connectorAmber strobe lightChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps NOTE: Not available with the variable speed flow control NOTE: If the ChipSafe® option has not been selected, it can be installed later.
Spare tire mount
Chocks and chock holders (complete set of 2)Cone holder, lockable to hold (10) 28" long traffic conesDual feed stops on infeedElectronic fuel gauge located near control panelFolding infeed tray (1500 mm) with spring lift assist Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)Pusher paddle with mountRubber infeed curtainSpare 235/75R x 17.5" tire and rim
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Quote No.
2020 MORBARK EEGER BEEVER™ 1621X ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 980.00
Variable speed flow controlWinch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock deviceCustom Options (60 - 90 days)Bottom bump barHydraulic swivel discharge chute
F.O.B Shipping Point
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣
♣♣ RETAIL
♣ $ 59,420.00
RETAIL♣ $ -
♣ $ 24,710.00
♣ $ 23,680.00 ♣
$ 23,680.00
♣ $ 27,080.00
♣ $ 25,640.00
RETAIL♣ $ 130.00 ♣ $ 235.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 905.00 ♣ $ 700.00 ♣ $ 210.00 ♣ $ 980.00
5LB ABC fire extinguisher with mount
Bolt on Options
NOTE: If the ChipSafe® option has not been selected, it can be installed later.
Amber strobe light
NOTE: Not available with the variable speed flow control
Cone holder, lockable to hold (10) 28" long traffic cones
John Deere 4045HFC06, Tier 4F, 173-HP diesel engine with over center clutch and block heater in lieu of standard
Folding infeed tray (1500 mm) with spring lift assist Electronic fuel gauge located near control panel
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
3” lunet ring in lieu of standard 2-1/2" pintle ring
Dual 10,000# rear jacks mounted roadside and curbside
6-round prong connector cable in lieu of standard 7-pin connector
Dual feed stops on infeed
Caterpillar C4.4, Tier 4F, 174-HP diesel engine with over center clutch and block heater in lieu of standard
Chocks and chock holders (complete set of 2)
32-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve
Manual crank swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
30” diameter x 23-3/4" wide, four (4) knife staggered knife pocket drum with removable knife holders and dual sided chambered air-impeller system
12-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out cover
Morbark orange urethane paint systemInfeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
10,000# jack with stationary foot pad
GM 5.7L, 165-HP gasoline engine with over center clutch
Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm coupler
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional valve section for installation of winch package
8.2#, 6" channel frame with cross bracing for additional structural rigidity
2020 MORBARK EEGER BEEVER™ 1821 (formerly known as M15R)
Perkins 1204E, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Caterpillar C4.4, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard
Ford 6.2L, 165-HP gasoline engine with over center clutch in lieu of standard engine and 800CCA battery in lieu of standard 1400CCA
Reversing automatic feed system
POWER OPTION:
Registration and operator guide holder
5" x 3" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
John Deere 4045HFC04, Tier 4F, 140-HP diesel engine with over center clutch and block heater in lieu of standard
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustmentTrailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights, and license plate holder with light
9000# Torflex axle, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
EQUIPMENT AND OPTIONS
Quote No.
STANDARD UNIT:
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 1821 (formerly known as M15R)
Quote No.
♣ $ 1,985.00 ♣ $ 3,790.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 350.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 980.00 ♣ $ 260.00
Spare tire mount
Pusher paddle with mount
Hydraulic rear stabilizers (right hand and left hand)Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
Steel guard enclosing the valve bank
Custom Options (60 - 90 days)
Super Trapp muffler (only available on gasoline engines)
Hydraulic swivel discharge chute
Spare 235/75R x 17.5 tire and rim
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Bottom bump bar
Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
Hydraulic front stabilizer in lieu of standard 10,000# tongue jack
Rubber infeed curtain
Variable speed flow control
F.O.B. Shipping Point
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣
♣♣♣
♣♣
♣♣♣
♣
♣♣♣♣
♣♣
♣♣ RETAIL♣ $ 118,290.00
RETAIL♣ $ 1,500.00
RETAIL♣ $ 235.00 ♣ $ 235.00 ♣ $ 515.00
♣ $ 260.00 ♣ $ 700.00 ♣ $ 210.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 5,450.00
♣ $ 2,035.00
Caterpillar 305E2CR undercarriage with 400mm steel tracks, 4.84 PSI ground pressure, low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH) in lieu of standard rubber tracks
Caterpillar C4.4,Tier 4F, 174-HP diesel engine with over center clutch and block heater
Dual feed stops on infeed
Rubber infeed curtain
Manuals: additional set of Morbark only (English only)
Electronic fuel gauge located near control panel
Bottom bump barCustom Equipment (60 - 90 days)
Pusher paddle with mount
Manuals: complete, additional set of Morbark and OEM (English only)
F.O.B. Shipping Point
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
Amber strobe light
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Flow control
John Deere 4045HFC06, Tier 4F, 173-HP diesel engine with over center clutch and block heater in lieu of standard
Hydraulic swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
Registration and operator guide holder6" x 2" tubular steel frame with cross bracing for additional structural rigidity
Steel guard enclosing valve bank
5LB ABC fire extinguisher with mount
Cone holder, lockable to hold (10) 28" long traffic cones
Bolt on Options
POWER OPTION:
Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm couplerReversing automatic feed system
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
Wireless remote control operation with tethered back-up system that controls the track, feed and yoke functions, along with the emergency engine stop
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperworkEnclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
30” diameter x 23-3/4" wide, four (4) knife staggered knife pocket drum with removable knife holders and dual sided chambered air-impeller system 32-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve27-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out coverLive hydraulic system including: ball valve, pump, motor, and valve bank with additional valve section for installation of winch package
2020 MORBARK EEGER BEEVER™ 1821 TRACK (formerly known as M15R Track)
EQUIPMENT AND OPTIONSSTANDARD UNIT:
Morbark orange urethane paint systemInfeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
Caterpillar 305 Track Undercarriage with 400mm rubber tracks, 4.84 PSI ground pressure, low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH)
Quote No.
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣
♣♣ RETAIL
♣ $ 63,530.00
♣ $ -
♣ $ 24,710.00
♣ $ 23,680.00 ♣
$ 23,680.00
♣ $ 27,080.00
♣ $ 26,640.00
RETAIL♣ $ 390.00 ♣ $ 130.00 ♣ $ 235.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 905.00 ♣ $ 700.00 ♣ $ 210.00 ♣ $ 980.00
Cone holder, lockable to hold (10) 28" long traffic cones
Ford 6.2L, 165-HP gasoline engine with over center clutch in lieu of standard engine and 800CCA battery in lieu of standard 1400CCA
6-round prong connector cable in lieu of standard 7-pin connector
Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, spring assisted down pressure and manually applied hydraulic down pressure at the valve handle
Caterpillar C4.4, Tier 4F, 174-HP diesel engine with over center clutch and block heater in lieu of standard
GM 5.7L, 165-HP gasoline engine with over center clutch
Reversing automatic feed system
Caterpillar C4.4, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard
John Deere 4045HFC06, Tier 4F, 173-HP diesel engine with over center clutch and block heater in lieu of standard
STANDARD UNIT:
Quote No.
Electronic fuel gauge located near control panel
Amber strobe light
Bolt on Options
Chocks and chock holders (complete set of 2)
EQUIPMENT AND OPTIONS
37-1/2" diameter x 23-3/4" wide, four (4) dual-edged knife staggered pocket drum with removable knife holders, dual sided chambered air impeller system and controllable air flow vents
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
8.2#, 6" channel frame with cross bracing for additional structural rigidity
John Deere 4045HFC04, Tier 4F, 140-HP diesel engine with over center clutch and block heater in lieu of standard
NOTE: Not available with the variable speed flow control NOTE: If the ChipSafe® option has not been selected, it can be installed later
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
6" x 4" tubular steel fixed drawbar, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
3" lunet ring in lieu of standard 2-1/2" pintle ring
Folding infeed tray (1500 mm) with spring lift assist
Perkins 1204E, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
5LB ABC fire extinguisher with mount
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Dual 10,000# rear jacks mounted roadside and curbside
18" bolt-on tongue extension
26-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover
Manual crank swivel discharge with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
44-gallon lockable fuel tank with drain plug, sight gauge and shut-off valve
Live hydraulic system including: ball valve, pump, motor and valve bank with additional valve section for installation of winch package
POWER OPTION:
Dual feed stops on infeed
2020 MORBARK EEGER BEEVER™ 1922 (formerly known as M18RX-SA)
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights and license plate holder with light
Registration and operator guide holder
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesMorbark orange urethane paint system
10,000# tongue jack with stationary foot pad
10,000# Torflex axle, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Quote No.
2020 MORBARK EEGER BEEVER™ 1922 (formerly known as M18RX-SA)♣ $ 1,985.00 ♣ $ 3,790.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 350.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 980.00 ♣ $ 260.00
Pusher paddle with mount
Super Trapp muffler (only available on gasoline engines)
Rubber infeed curtainSpare 235/75R x 17.5 tire and rim
F.O.B. Shipping Point
Bottom bump bar
Spare tire mount
Hydraulic swivel discharge chuteSteel guard enclosing the valve bank
Custom Options (60 - 90 days)
Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock deviceVariable speed flow control
Hydraulic rear stabilizers (right hand and left hand)Hydraulic front stabilizer in lieu of standard 10,000# tongue jack
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣
♣♣ RETAIL
♣ $ 63,785.00
♣ $ -
♣ $ 24,710.00
♣ $ 23,680.00 ♣
$ 23,680.00
♣ $ 27,080.00
♣ $ 26,640.00
RETAIL♣ $ 130.00 ♣ $ 235.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 905.00 ♣ $ 700.00 ♣ $ 980.00
Ford 6.2L, 165-HP gasoline engine with over center clutch in lieu of standard engine and 800CCA battery in lieu of standard 1400CCA
Perkins 1204E, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesDual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with box mount coupler
41-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover
Reversing automatic feed system
Morbark orange urethane paint system
Manual crank swivel discharge with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
Dual feed stops on infeed
6" x 4" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
6” x 2” tubular steel frame with cross bracing for additional structural rigidity
2020 MORBARK EEGER BEEVER™ 2131-SA (formerly known as M18R-SA)
10,000# Torflex axle, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
60-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge
EQUIPMENT AND OPTIONS
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustmentTrailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights and license plate holder with light
37-3/8" diameter x 23-3/4" wide, four (4) dual-edged knife staggered pocket drum with removable knife holders, dual sided chambered air impeller system and controllable air flow vents
Quote No.
STANDARD UNIT:
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional valve section for installation of winch package
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
Caterpillar C4.4, Tier 4F, 174-HP diesel engine with over center clutch and block heater in lieu of standard
Cone holder, lockable to hold (10) 28" long traffic cones
John Deere 4045HFC06, Tier 4F, 173-HP diesel engine with over center clutch and block heater in lieu of standard
Caterpillar C4.4, Tier 4F, 147-HP diesel engine with over center clutch and block heater in lieu of standard
10,000# tongue jack with stationary foot pad
6-round prong connector cable in lieu of standard 7-pin connector
Folding infeed tray (1500 mm) with spring lift assist
Amber strobe light
John Deere 4045HFC04, Tier 4F, 140-HP diesel engine with over center clutch and block heater in lieuof standard
GM 5.7L, 165-HP gasoline engine with over center clutch
Registration and operator guide holder
Bolt on Options3” lunet ring in lieu of standard 2-1/2" pintle ring
NOTE: If the ChipSafe® option has not been selected, it can be installed later NOTE: Not available with the variable speed flow control
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
POWER OPTION:
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Dual 10,000# rear jacks mounted roadside and curbside
Chocks and chock holders (complete set of 2)
5LB ABC fire extinguisher with mount
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 2131-SA (formerly known as M18R-SA)
Quote No.
♣ $ 1,985.00 ♣ $ 3,790.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 350.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 980.00 ♣ $ 5,850.00
♣ $ 260.00 Steel guard enclosing the valve bank
Spare tire mountSpare 235/75R x 17.5 tire and rim
Variable speed flow control
Pusher paddle with mount
F.O.B. Shipping Point
Manuals: complete, additional set of Morbark and OEM (English only)
Super Trapp muffler (only available on gasoline engines)
Remote control: wireless, 900MHz with tethered back-up system, electric over hydraulic control bar actuator, and emergency engine stop
Hydraulic front stabilizer in lieu of standard 10,000# tongue jack
Rubber infeed curtain
Bottom bump bar
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Hydraulic swivel discharge chute
Hydraulic rear stabilizers (right hand and left hand)
Custom Options (60 - 90 days)
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
Manuals: additional set of Morbark only (English only)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣
♣♣
RETAIL♣ $ 87,925.00
♣ $ 4,100.00
♣ $ 6,200.00 ♣ $ 16,170.00
♣ $ 16,170.00
♣ $ 24,210.00
♣ $ 20,680.00 ♣ $ 20,680.00
RETAIL♣ $ 130.00 ♣ $ 235.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 905.00
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional valve section for installation of winch package
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps NOTE: Not available with the variable speed flow control
EQUIPMENT AND OPTIONS
Reversing automatic feed system37-3/8" diameter x 23-3/4" wide, four (4) dual-edged knife staggered pocket drum with removable knife holders, dual sided chambered air impeller system and controllable air flow vents
John Deere 4045HFC06, Tier 4F, 173-HP diesel engine with over center clutch and block heater in lieu of standard
6-round prong connector cable in lieu of standard 7-pin connector
6” x 2” tubular steel frame with cross bracing for additional structural rigidity
5LB ABC fire extinguisher with mount
Caterpillar C7.1, Tier 4F, 225-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)Perkins 1206E, Tier 4F, 225-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
NOTE: If the ChipSafe® option has not been selected, it can be installed later.
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
41-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler and clean-out cover
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Caterpillar C7.1, Tier 4F, 275-HP diesel engine with over center clutch and block heater in lieu of standard
Bolt on Options
Perkins 1206E, Tier 4F, 275-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Quote No.
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, tail lights, and license plate holder with light
Hydraulic front stabilizer
6" x 4" tubular steel telescoping drawbar with (2) 12" extensions, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
POWER OPTION:
Chocks and chock holders (complete set of 2)
Dual 10,000# rear jacks mounted roadside and curbside
16,000# Torflex tandem axles, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
Registration and operator guide holder
Caterpillar C4.4, Tier 4F, 174-HP diesel engine with over center clutch and block heater in lieu of standard
Manual crank swivel discharge with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
Morbark orange urethane paint system
Amber strobe light
60-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge
3” lunet ring in lieu of standard 2-1/2" pintle ring
Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with box mount coupler
John Deere 6068HFC08, Tier 4F, 250-HP diesel engine with over center clutch and block heater in lieu of standard
Cone holder, lockable to hold (10) 28" long traffic cones
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Isuzu 4HK1X, Tier 4F, 188-HP diesel engine with over center clutch and block heater
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
STANDARD UNIT:
2020 MORBARK EEGER BEEVER™ 2131-TA (formerly known as M18R-TA)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Quote No.
2020 MORBARK EEGER BEEVER™ 2131-TA (formerly known as M18R-TA)♣ 700.00$ ♣ $ 980.00 ♣ $ 3,790.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 980.00 ♣ $ 5,850.00
♣ $ 260.00
Dual feed stops on infeed
Hydraulic swivel discharge chute
Manuals: complete, additional set of Morbark and OEM (English only)
Remote control: wireless, 900MHz with tethered back-up system, electric over hydraulic control bar actuator and emergency engine stop
Hydraulic rear stabilizers (right hand and left hand)
Variable speed flow control
Folding infeed tray (1500 mm) with spring lift assist
Pusher paddle with mount
Bottom bump bar
Manuals: additional set of Morbark only (English only)
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
Custom Options (60 - 90 days)
F.O.B. Shipping Point
Steel guard enclosing the valve bank
Spare 235/75R x 17.5 tire and rimRubber infeed curtain
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
Spare tire mount
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣♣
♣♣
♣♣♣
♣
♣♣
♣ ♣
♣♣♣♣♣
♣♣
♣ RETAIL♣ $ 153,000.00
♣ $ 3,520.00
♣ $ -
RETAIL♣ $ 130.00 ♣ $ 235.00 ♣ $ - ♣ $ 235.00 ♣ $ 4,150.00
♣ $ 260.00 ♣ $ 260.00 ♣ $ 700.00 ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) boltsManuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
NOTE: Not available with the variable speed flow control NOTE: If the ChipSafe® option has not been selected, it can be installed later.
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Chocks and chock holders (complete set of 2)Cone holder, lockable to hold (10) 28" long traffic cones Dual feed stops on infeed
Bolt on Options
5LB ABC fire extinguisher with mount3” lunet ring in lieu of standard 2-1/2" pintle ring
POWER OPTION:
Amber strobe light
John Deere 6068HFC08, Tier 4F, 250-HP diesel engine with over center clutch and block heater in lieu of standard
6-round prong connector cable in lieu of standard 7-pin connector
Perkins 1206E, Tier 4F, 275-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery Registration and operator guide holderComplete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperworkEnclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustmentTrailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps, and license plate holder with light
Caterpillar C7.1, Tier 4F, 275-HP diesel engine with over center clutch and block heaterExtended tail light mounts (rabbit ear style) mounted on infeed top
Steel guard enclosing valve bank
Reversing automatic feed system
Hydraulic swivel discharge with 270° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper6” x 2” tubular steel frame with cross bracing for additional structural rigidity6" x 4" tubular steel fixed drawbar, adjustable hitch plate with 2-1/2" pintle ring and 3/8" thick safety chains with clasp hooks
20,000# Torflex tandem axles, electric brakes and break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
Mor-Lift Model 150M Hydraulic Knuckleboom Loader Package, joystick controls, continuous rotationby-pass grapple, variable speed flow control, hydraulic oil cooler and hydraulic rear stabilizers
Hydraulic front stabilizer
37-3/8" diameter x 23-3/4" wide, four (4) dual-edged knife staggered pocket drum with removable knife holders, dual sided chambered air impeller system and controllable air flow vents60-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge
Morbark orange urethane paint system
41-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out coverLive hydraulic system including: ball valve, pump, motor and valve bank with additional valve section for installation of winch package
Ground mounted operator's controls
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesDual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with box mount coupler
STANDARD UNIT:
2020 MORBARK EEGER BEEVER™ 2131 LOADER (formerly known as M18R Loader)
EQUIPMENT AND OPTIONS
Quote No.
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 2131 LOADER (formerly known as M18R Loader)
Quote No.
♣ $ 260.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 415.00 ♣ $ 5,450.00
♣ $ 2,035.00 ♣ $ 2,940.00 ♣
$ 5,100.00
Spare tire mount
F.O.B. Shipping Point
Remote control: wireless, 900MHz with tethered back-up system (CONTROLS LOADER FUNCTIONS) in lieu of standard ground mounted operator's controls and includes M.I.C.S. (Morbark Integrated Control System) located in the instrument panel
Operator's platform and seat in lieu of standard ground mounted operator's controlsBottom bump bar
Spare 235/75R x 17.5 tire and rim
Variable speed flow controlWinch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock deviceCustom Options (60 - 90 days)
Pusher paddle with mount
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣
♣♣♣
♣♣♣
♣♣♣
♣
♣♣♣♣♣♣
♣
♣ RETAIL♣ $ 145,205.00
RETAIL♣ $ (4,380.00)
♣ $ (4,380.00)
♣ $ 3,520.00
♣ $ -
RETAIL♣ $ 235.00 ♣ $ 235.00 ♣
$ 515.00
♣ $ 4,150.00
♣ $ 260.00 ♣ 700.00$ ♣ 273.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 310.00 ♣ $ 415.00
Wireless remote control operation with tethered back-up system that controls the track, feed and yoke functions, along with the emergency engine stop
John Deere 6068HFC08, Tier 4F, 250-HP diesel engine with over center clutch and block heater in lieu of standard
Morbark orange urethane paint system
37-3/8” diameter x 23-3/4" wide, four (4) dual-edged knife staggered pocket drum with removable knife holders, dual sided chambered air impeller system and controllable air flow vents
Dual horizontal feed wheels with TorqMax™ top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and direct drive bottom feed wheel with torque arm couplerTop 30" wide horizontal feed wheel equipped with serrated teeth and knife barsReversing automatic feed system
6" x 2" tubular steel frame with cross bracing for additional structural rigidity
2020 MORBARK EEGER BEEVER™ 2131 TRACK (formerly known as M18R Track)
POWER OPTION:
STANDARD UNIT:
Steel guard enclosing valve bank
EQUIPMENT AND OPTIONS
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery 2-1/2" pintle ring
Caterpillar 305 Track Undercarriage with 400mm rubber tracks, 4.84 PSI ground pressure,low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH)
60-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge44-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover Live hydraulic system including: ball valve, pump, motor and valve bank with additional valve section for installation of winch packageHydraulic swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
Quote No.
5LB ABC fire extinguisher with mount
NOTE: Not available with the variable speed flow control
ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps
Registration and operator guide holder
Caterpillar C7.1, Tier 4F, 225-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Caterpillar C7.1, Tier 4F, 275-HP diesel engine with over center clutch and block heater
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Perkins 1206E, Tier 4F, 225-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Perkins 1206E, Tier 4F, 275-HP diesel engine with over center clutch and block heater in lieu of standard (Limited Supply)
Cone holder, lockable to hold (10) 28" long traffic cones Dual feed stops on infeed
Bolt on Options
Pusher paddle with mount
Caterpillar 305E2CR undercarriage with 400mm steel tracks, 4.84 PSI ground pressure, low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH) in lieu of standard rubber tracks
Amber strobe light
NOTE: If the ChipSafe® option has not been selected, it can be installed later.
Rubber infeed curtainVariable speed flow control
Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
Maintenance Knife Kit (P/N 29834-792) includes (4) knives and (16) bolts
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 2131 TRACK (formerly known as M18R Track)
Quote No.
♣ $ 5,450.00
♣ $ 2,035.00 Bottom bump bar
Winch package: heavy-duty, 5000# pull capacity with rope, 10' chafe guard, and interlock device
F.O.B. Shipping Point
Custom Options (60 - 90 days)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣ ♣♣♣
♣♣
♣♣ RETAIL
$ 183,650.00
♣ $ 5,410.00
♣ $ 5,410.00
♣ $ 390.00 ♣ $ 235.00 ♣ $ 235.00 ♣ $ 260.00 ♣ $ 260.00 ♣ $ 905.00 ♣ 700.00$ ♣ $ 3,790.00 ♣ $ 500.00 ♣ $ 175.00 ♣ $ 260.00 ♣ $ 5,850.00
♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 415.00
Spare tire mountSpare 235/75R x 17.5 tire and rim
Variable speed flow control
Rubber infeed curtain
Bolt on Options
John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with over center clutch, block heater and Flexxaire fan
Manuals: complete, additional set of Morbark and OEM (English only)
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustmentTrailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps and license plate holder with light
Caterpillar C9.3B, Tier 4F, 415-HP diesel engine with over center clutch, block heater and Flexxaire reversing fan in lieu of standard
Cone holder, lockable to hold (10) 28" long traffic cones
Morbark orange urethane paint system
65-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge45-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover
Quote No.
Steel guard enclosing the valve bankLockable steel combination tool and battery box compartment with 8D, 1400CCA battery
Dual feed stops on infeedHydraulic rear stabilizers (right hand and left hand)
Manuals: additional set of Morbark only (English only)Pusher paddle with mountRemote control: wireless, 900MHz with tethered back-up system, electric over hydraulic control bar actuator and emergency engine stop
Registration and operator guide holder
Dual 10,000# rear jacks mounted roadside and curbside
18" bolt-on tongue extension
2020 MORBARK EEGER BEEVER™ 2230 (formerly known as M20R)EQUIPMENT AND OPTIONS
STANDARD UNIT:
Hydraulic front stabilizer
37-3/8” diameter x 29-1/8" wide, six (6) dual-edged knife staggered pocket drum with removable knife holders and single sided chambered air impeller system
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
8” x 2” tubular steel frame with cross bracing for additional structural rigidity
POWER OPTION:John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with over center clutch, block heater and Flexxaire fan in lieu of standard
20,000# Torflex tandem axles, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
Extended tail light mounts (rabbit ear style) mounted on infeed top
Hydraulic swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
8" x 4" tubular steel fixed drawbar, adjustable hitch plate with 3" pintle ring and 3/8" thick safety chains with clasp hooks
Reversing automatic feed system
Chocks and chock holders (complete set of 2)
Dual horizontal feed wheels with TorqMax™ Plus pegged top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and sprocket driven bottom feed wheel
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cables
5LB ABC fire extinguisher with mount
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Amber strobe light
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Quote No.
2020 MORBARK EEGER BEEVER™ 2230 (formerly known as M20R)♣ $ 5,150.00
♣ $ 775.00
F.O.B. Shipping Point
Custom Options (60 - 90 days)Winch package: 5000# pull capacity with rope and 10' chafe guard
Skidder attachment mounted on tongue of unit
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣
♣
♣♣
♣♣
♣♣♣♣♣
♣♣
♣
♣♣♣♣♣
♣♣
♣ ♣ RETAIL♣ $ 205,950.00
RETAIL
♣ $ 5,410.00
♣ $ 5,410.00
RETAIL♣ $ 235.00 ♣ $ 235.00 ♣ $ 260.00 ♣ $ 260.00 ♣ 700.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 980.00 ♣ $ 310.00
♣ $ 775.00
John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with over center clutch, block heater and Flexxaire fan
Spare tire mount
John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with over center clutch, block heater and Flexxaire fan in lieu of standard
F.O.B. Shipping Point
Dual feed stops on infeed
Spare 235/75R x 17.5 tire and rimManuals: additional set of Morbark only (English only)
POWER OPTION:
Caterpillar C9.3B, Tier 4F, 415-HP diesel engine with over center clutch, block heater and Flexxaire reversing fan in lieu of standard
5LB ABC fire extinguisher with mountBolt on Options
Quote No.
Reversing automatic feed system
Skidder attachment mounted on tongue of unit
EQUIPMENT AND OPTIONS
STANDARD UNIT:
TorqMax™ Plus pegged top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and sprocket driven bottom bed chain
Extended tail light mounts (rabbit ear style) mounted on infeed top
Manuals: complete, additional set of Morbark and OEM (English only)
Chocks and chock holders (complete set of 2)
Custom Options (60 - 90 days)
Live hydraulic system including: ball valve, pump, motor, and valve bank
Morbark orange urethane paint system
Amber strobe light
37-3/8” diameter x 28-1/2" wide, six (6) dual-edged knife staggered pocket drum with removable knife holders and single sided chambered air impeller system
Cone holder, lockable to hold (10) 28" long traffic cones
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps and license plate holder with lightTail lamps integrated into infeed deck assembly with steel protective barrier
Hydraulic dual rear stabilizers
Registration and operator guide holderLockable steel combination tool and battery box compartment with 8D, 1400CCA battery
8" x 2" tubular steel frame with cross bracing for additional structural rigidity
5' live floor rigid infeed bed with two rows of WDH-110 welded flight chain to assist in carrying material to the feed system and rear drop legs for additional infeed support
Hydraulic swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
43-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover
20,000# Torflex tandem axles, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fendersHydraulic front stabilizer
Steel guard enclosing valve bank
Infeed with rigid tray
8" x 4" tubular steel fixed drawbar, adjustable hitch plate with 3" pintle ring and 3/8" thick safety chains with clasp hooks
2020 MORBARK EEGER BEEVER™ 2230 with Infeed Deck (formerly known as M20R)
Wireless remote control operation with tethered back-up system that controls the feed and yoke functions, rear stabilizers and hydraulic swivel discharge
65-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣♣
♣♣
♣♣
♣♣♣
♣
♣♣
♣
♣♣♣♣♣
♣♣
♣ RETAIL♣ $ 235,255.00
RETAIL♣ $ 5,410.00
♣ $ 5,410.00
RETAIL♣ $ 390.00 ♣ $ 235.00 ♣ $ 235.00 ♣ $ 260.00 ♣ $ 260.00 ♣ 700.00$ ♣ $ 500.00 ♣ $ 175.00 ♣ $ 310.00 ♣ $ 980.00 ♣ $ 310.00 ♣ $ 5,150.00
♣ $ 390.00
Caterpillar C9.3B, Tier 4F, 415-HP diesel engine with over center clutch, block heater and Flexxaire reversing fan in lieu of standard
5LB ABC fire extinguisher with mount
Winch package: 5000# pull capacity with rope and 10' chafe guard
Spare 235/75R x 17.5 tire and rim
Amber strobe light
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with over center clutch, block heater and Flexxaire fan
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Manuals: complete, additional set of Morbark and OEM (English only)
Bolt on Options
Chocks and chock holders (complete set of 2)
Dual feed stops on infeed
Hydraulic front stabilizer
POWER OPTION:
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with over center clutch, block heater and Flexxaire fan in lieu of standard
Manuals: additional set of Morbark only (English only)
Registration and operator guide holder
Steel guard enclosing valve bank
Extended tail light mounts (rabbit ear style) mounted on infeed top
Trailer wiring package includes: 7-pin flat electrical connector, LED tail lamps, LED side marker lamps and license plate holder with light
Custom Options (60 - 90 days)
18" bolt-on tongue extension
Cone holder, lockable to hold (10) 28" long traffic cones
Spare tire mount
Caterpillar joystick controls in lieu of standard Morbark controls for loader units
Rubber infeed curtain
37-3/8” diameter x 29-1/8" wide, six (6) dual-edged knife staggered pocket drum with removable knife holders and single sided chambered air impeller system
Infeed with rigid tray and control handle to actuate feed wheels and dual safety pull cablesDual horizontal feed wheels with TorqMax™ Plus pegged top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and sprocket driven bottom feed wheel
8" x 4" tubular steel fixed drawbar, adjustable hitch plate with 3" pintle ring and 3/8" thick safety chains with clasp hooks
45-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out cover
STANDARD UNIT:
Morbark orange urethane paint system
EQUIPMENT AND OPTIONS
2020 MORBARK EEGER BEEVER™ 2230 Loader (formerly known as M20R Loader)
Quote No.
20,000# Torflex tandem axles, electric brakes, break-away actuator with 235/75R x 17.5", 16-ply radial tires and hexagon splash guard fenders
58-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge
Hydraulic swivel discharge chute with 270° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
8" x 2" tubular steel frame with cross bracing for additional structural rigidity
Reversing automatic feed system
Ground mounted operator's controls
Mor-Lift Model 150M Knuckleboom Loader with 14' extended boom reach and 2,680 LB. lift capacity at 10' reach. Includes: Model 649 By-Pass Grapple with 360º continuous rotation, joystick controls, hydraulic dual rear stabilizers, tail light guards and hydraulic oil cooler
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
2020 MORBARK EEGER BEEVER™ 2230 Loader (formerly known as M20R Loader)
Quote No.
♣ $ 2,940.00
♣ $ 5,100.00
♣ $ 775.00
F.O.B. Shipping Point
Operator's seat and platform in lieu of standard ground mounted operator's controls and includes M.I.C.S. (Morbark Integrated Control System) located in the instrument panel
Skidder attachment mounted on tongue of unit
Remote control: wireless, 900MHz with tethered back-up system (CONTROLS LOADER FUNCTIONS) in lieu of standard ground mounted operator's controls and includes M.I.C.S. (Morbark Integrated Control System) located in the instrument panel
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381Fax: 989-866-2280www.morbark.com
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣♣
♣
♣♣
♣♣
♣♣
♣♣♣♣
♣♣♣♣♣♣
♣ RETAIL♣ $ 252,710.00
♣ $ 5,410.00
♣ $ 5,410.00
RETAIL♣ $ 235.00 ♣ 700.00$ ♣ $ 500.00 ♣ $ 175.00
F.O.B. Shipping Point
Reversing automatic feed system
5LB ABC fire extinguisher with mount
STANDARD UNIT:
2020 MORBARK EEGER BEEVER™ 2230 Track (formerly known as M20R Track)
John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with over center clutch, block heater and Flexxaire fan in lieu of standard
John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with over center clutch, block heater and Flexxaire fan
Dual feed stops on infeed
Bolt on Options
Hitch mount receiver plate
Wireless remote control operation with tethered back-up system that controls the track, feed and yoke functions, along with the hydraulic swivel discharge
Live hydraulic system including: ball valve, pump, motor and valve bank
Infeed with rigid tray
EQUIPMENT AND OPTIONS
Lockable steel combination tool and battery box compartment with 8D, 1400CCA battery
Morbark orange urethane paint system
M.I.C.S. (Morbark Integrated Control System) located in the instrument panel
Quote No.
8” x 2” tubular steel frame with cross bracing for additional structural rigiditySteel guard enclosing valve bank
Caterpillar C9.3B, Tier 4F, 415-HP diesel engine with over center clutch, block heater and Flexxaire reversing fan in lieu of standard
65-gallon lockable fuel tank with drain plug, sight gauge, shut-off valve and electronic fuel gauge43-gallon lockable hydraulic reservoir with sight gauge, drain plug, hydraulic oil cooler, and clean-out cover
Caterpillar 312B Track Undercarriage with 500mm grousers, 4.24 PSI ground pressure, low speed travel range of 80 FPM (1 MPH) and high speed travel range of 120 FPM (1.4 MPH)
TorqMax™ Plus pegged top feed wheel compression system, hydraulic lift assist, Variable Force™ constant hydraulic down pressure system with additional manually applied hydraulic down pressure at the valve handle and sprocket driven bottom feed wheel
Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
Hydraulic swivel discharge chute with 360° rotation, turnbuckle height adjustment, bottom clean-out door and adjustable flipper
37-3/8” diameter x 28-1/2" wide, six (6) dual-edged knife staggered pocket drum with removable knife holders and single sided chambered air impeller system
Manuals: complete, additional set of Morbark and OEM (English only)Manuals: additional set of Morbark only (English only)
5' live floor rigid infeed bed with two rows of WDH-110 welded flight chain to assist in carrying material to the feed system and feed system stop switch located at the infeed
Complete set of manuals including: Safety and Operator’s, Parts Manual with electronic back-up, which also includes a Safety Video and OEM component manuals. Also included is an engine manual if applicable along with start-up paperwork
Registration and operator guide holder
POWER OPTION:
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ TRG♣♣♣♣♣♣♣♣ RETAIL♣ $ 3,425.00
RETAIL ♣ 24104FO $ 75.00
159.5" Length x 80" width (outside of fenders)GVWR 4,000#Torsion Spring AxleTires:225/75/15Electric Brakes w/breakaway switch and integral battery and chargerStandard with 2" ball coupler and safety chains & hooks
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
Weight 790#
2020 Rayco TRG Trailer with Brakes
F.O.B. Shipping Point
Pintle hitch in lieu of 2" Ball
2,000# hand-crank tongue jack w/foot pad (907kg)
OPTIONS:
DOT approved lighting
EQUIPMENT AND OPTIONS
STANDARD UNIT:Trailer for RG13, RG25HD, RG27, RG37, RG37T, RG55R, RG55, RG55T-R, RG80-R
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ TR100L♣♣♣♣♣♣♣♣ RETAIL♣ $ 5,340.00
RETAIL ♣ 25510FO $ 280.00 ♣ 23046FO $ 100.00 ♣ 26036FO $ 60.00
F.O.B. Shipping Point
Electric Brakes w/breakaway switch and integral battery and chargerStandard with 2" ball coupler and safety chains & hooks
OPTIONS:Hitch extension - 18" 2-5/16" Bulldog ball hitch in lieu of 2" ball Pintle hitch in lieu of 2" Ball
STANDARD UNIT:Trailer for all stump cuttersWeight 1,300#
2,000# hand-crank tongue jack w/foot padDOT approved lighting
157" Length x 78" width (outside of fenders)GVWR 7,000#Tandem Dexter E-Z lube axles, 3,500# each700-15 Load range 'D' tires
2020 Rayco TR100L Trailer with Brakes
EQUIPMENT AND OPTIONS
Quote No.
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG13-II♣♣♣♣♣♣♣♣ RETAIL♣ 780313 $ 5,135.00
RETAIL ♣ 765113 $ 100.00 ♣ 4001 $ 270.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG13 Series-II Mini Work-Force Handle Bar Stump Cutter
OPTIONS:
EQUIPMENT AND OPTIONS
STANDARD UNIT:Honda Gas engine,13 HP, model GX390, manual pull startOperator Presence System25” wideDisc-type wheel brake8 Rayco Super Tooth cutting toolsAdjustable handlebarsLow engine oil shutdown
European compliantSteel belt & cutter wheel guards
Safety / Sales Kit
F.O.B. Shipping Point
Hour meter kitAuxiliary Chip RetainersTrailer w/Torflex axle and electric brakesPintle hitch in lieu of 2" ball (for trailer)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG25-HD♣♣♣♣♣♣♣♣ RETAIL♣ 780313 $ 10,030.00
RETAIL ♣ 6015 $ 400.00 ♣ 9830 $ 100.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 RG25HD Mini Work-Force Handle-Bar, Self-Propelled Stump Cutter
EQUIPMENT AND OPTIONS
STANDARD UNIT:Kohler Command Gas engine, 25 HPOperator Presence System
F.O.B. Shipping Point
Self-propelled with forward and reverse 29” wideDisc-type wheel brake12 Rayco Super Tooth cutting toolsSteel belt & cutter wheel guardsAdjustable handlebars
Trailer w/Torflex axle and electric brakesPintle hitch in lieu of 2" ball (for trailer)
Low engine oil shutdownSafety / Sales Kit
OPTIONS:EEC kit (European Spec includes auxiliary chip retainers)Hour meter kit
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG27♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 30098 $ 19,090.00
RETAIL ♣ 30028 $ 440.00 ♣ 28482 $ 580.00 ♣ 41818 $ 525.00 ♣ 29429FO $ 1,815.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40319 $ 100.00
Quote No.
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Electric clutch with integrated cutter wheel brake
2-Wheel front end with hydraulic steeringTires: (4) 18x8-10 extra grip tread
Self-Propelled ground drive with automatic brake
2020 Rayco RG27 Super Jr Self Propelled Stump Cutter - Swing-Out Controls
Swing-out operator control stationSpring centering control valve
17.25" diameter x 1" wide cutter wheel
EQUIPMENT AND OPTIONS
STANDARD UNIT:27 HP Vanguard Big Block V-Twin Gas engine
F.O.B. Shipping Point
Safety / Sales Kit
18 Rayco Super Tooth cutting toolsSteel hood to house fuel and hydraulic oil reservoirs, toolbox, and valvingHour-meter
OPTIONS:EEC kit (European Spec)
Pintle hitch in lieu of 2" ball (for trailer)
Dual wheel kit
Hydraulic backfill blade - Factory installedTrailer w/Torflex axle and electric brakes
Maintenance Kit
Command Cut Kit
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG37♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 36232 $ 24,300.00
RETAIL ♣ 32614FO $ 2,475.00 ♣ 30029 $ 440.00 ♣ 28482 $ 580.00 ♣ 38784 $ 525.00 ♣ 29429FD $ (1,056.00)♣ 36214FO $ 580.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40319 $ 100.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG37 Super Jr Self Propelled Stump Cutter - Swing-Out Controls
EQUIPMENT AND OPTIONS
STANDARD UNIT:37 HP Vanguard Big Block V-Twin Gas engine with Electronic Fuel InjectionSelf-Propelled ground drive with automatic hill brakeElectric clutch with integrated cutter wheel brakeSwing out operator control stationSpring centering control valve2-Wheel front end with hydraulic steeringTires: (4) 18x 8.5 -10 extra grip tread
Command Cut automatic swing speed control kit - factory installed
18 Rayco Super Tooth cutting toolsSlewing ring pivot designSteel hood to house fuel and hydraulic oil reservoirs and valvingBackfill Blade2-Speed ground travelHour-meterSafety / Sales Kit
OPTIONS:4x4 kit - Factory OptionEEC kit (European Spec.)Dual wheel kit
17.25" diameter x 1" wide cutter wheel
Maintenance Kit
F.O.B. Shipping Point
Remove hydraulic backfill blade (Backfill blade factory delete)Expandable, folding backfill blade (50" expanded width, 35" folded width)
Pintle hitch in lieu of 2" ball (for trailer)Trailer w/Torflex axle and electric brakes
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG37T♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 36218 $ 27,730.00
RETAIL ♣ 33155 $ 280.00 ♣ 38780 $ 525.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40320 $ 110.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 RG37T Trac Jr Self-Propelled Stump Cutter on Rubber Tracks
EQUIPMENT AND OPTIONS
STANDARD UNIT:37 HP Vanguard Big Block V-Twin Gas engine with Electronic Fuel InjectionSelf-Propelled ground travelNon-marking tracks (white tracks)Approximate ground pressure of 5.3 psiElectric clutch with integrated cutter wheel brakeSwing-out operator control station Spring centering control valves with soft-touch handles2-speed ground travel17.25" diameter x 1" wide cutter wheel18 Rayco Super Tooth cutting toolsSlewing ring pivot designHydraulic backfill bladeRubber chip retainer curtainsHour-meter
Trailer w/Torflex axle and electric brakes
F.O.B. Shipping Point
Safety/Sales Kit
OPTIONS:EEC kit (European Spec.)Command Cut automatic swing speed control kit - factory installed
Pintle hitch in lieu of 2" ball (for trailer)Maintenance Kit
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG55R♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 39827 $ 47,000.00
RETAIL ♣ 29503FO $ 580.00 ♣ 34764 $ 285.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40317 $ 100.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG55R Super Jr Self Propelled Stump Cutter - Radio Remote Control
EQUIPMENT AND OPTIONS
STANDARD UNIT:55-HP Kubota WG1605-G Gasoline, liquid-cooled engineWireless radio remote controls in addition to swing-out panelSelf-Propelled ground drive with automatic brake4-Wheel drive with 2 speedElectric clutchCommand cut, automatic swing controlHydraulic backfill blade
F.O.B. Shipping Point
Maintenance Kit
Tires: (6) 18 x 8.5 - 10 extra grip tread
Dual Front wheel kit (for steering tires)
Dual rear wheelsOscillating front end, 34.5" width20" diameter x 1.5" thick cutter wheel24 Rayco Super Tooth cutting toolsSteel hood to house fuel and hydraulic oil reservoirs and valving6.5 Gallon fuel capacity
Chip guard extension assemblyTrailer w/Torflex axle and electric brakesPintle hitch in lieu of 2" Ball
Hour-meter and engine warning lightsExpandable backfill blade (unfolds to 50" width/retracts to standard 35" width)
Safety Sales Kit
OPTIONS:
European compliant
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG55♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 38661 $ 44,375.00
RETAIL ♣ 29503FO $ 580.00 ♣ 34764 $ 285.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40317 $ 100.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG55 Super Jr Self Propelled Stump Cutter - Swing-Out Controls
EQUIPMENT AND OPTIONS
STANDARD UNIT:55-HP Kubota WG1605-G Gasoline, liquid-cooled engine 89 ft. lbs. torqueSelf-Propelled ground drive with automatic brake4-Wheel drive with 2 speedSwing out operator consoleElectric clutchCommand cut, automatic swing controlHydraulic backfill blade
F.O.B. Shipping Point
Maintenance Kit
Tires: (6) 18 x 8.5 - 10 extra grip tread
Dual Front wheel kit (for steering tires)
Dual rear wheelsOscillating front end, 34.5" width20" diameter x 1.5" thick cutter wheel24 Rayco Super Tooth cutting toolsSteel hood to house fuel and hydraulic oil reservoirs and valving8.5 Gallon fuel capacity
Chip guard extension assemblyTrailer w/Torflex axle and electric brakesPintle hitch in lieu of 2" Ball
Hour-meter and engine warning lightsExpandable backfill blade (unfolds to 50" width/retracts to standard 35" width)
Safety / Sales Kit
OPTIONS:
European compliant
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣ RG55T♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 40205 $ 50,610.00
RETAIL ♣ 34764 $ 285.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ 40317 $ 100.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG55T-R Trac Jr Gasoline with Radio Remote Control
EQUIPMENT AND OPTIONS
STANDARD UNIT:55-HP Kubota WG1605-G Gasoline, liquid-cooled engine
24 Rayco Super Tooth cutting toolsSteel hood to house fuel and hydraulic oil reservoirs and valving6.5 Gallon fuel capacityHour-meter and engine warning lights
Wireless radio remote controls in addition to swing-out panel
Command cut, automatic swing control
Non-marking tracks (white tracks)2-Speed ground travelElectric clutch
Hydraulic backfill blade
Maintenance Kit
Expandable backfill blade (unfolds to 50" width/retracts to standard 35" width)
Safety / Sales Kit
F.O.B. Shipping Point
20" diameter x 1.5" thick cutter wheel
OPTIONS:Chip guard extension assemblyTrailer w/Torflex axle and electric brakes
European compliant
Pintle hitch in lieu of 2" Ball
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
♣ RG80A♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 38502 $ 64,510.00
RETAIL ♣ 38445-ES $ 105.00 ♣ TRG $ 3,425.00 ♣ 24104FO $ 75.00 ♣ TR100L $ 5,340.00 ♣ 25510FO $ 280.00 ♣ 23046FO $ 100.00 ♣ 26036FO $ 60.00 ♣ 40316 $ 210.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG80-R Self Propelled Stump Cutter - Radio Remote Control
EQUIPMENT AND OPTIONS
STANDARD UNIT:Ford MSG425, 2.5L liquid cooled gasoline engine Wireless radio remote controlSelf Propelled ground drive w/full time, four-wheel drive systemElectric over hydraulic controlsHydraulic steeringHigh/Low travel speedQuick Stop cutter wheelHydrostatic cutter wheel drive systemTires: (8) 5.70" x 22.4" Dual front and rear drive wheels23" diameter x 1 1/2" thick cutter wheel24 Rayco Super Tooth cutting toolsLow profile designAuxiliary chip retainer curtainsHour-meter/Fuel gauge65" True Cutting WidthCommand CutBack fill bladePositive lock securing system (trailer hook up)
Safety / Sales KitEuropean compliant
Maintenance Kit
Trailer w/Torflex axle and electric brakesPintle hitch in lieu of 2" Ball for TRG Trailer
Decal kitOPTIONS:
F.O.B. Shipping Point
Tandem axle trailer (2" ball hitch)Hitch extension - 18" (for TR100L trailer)2-5/16" Bulldog ball hitch in lieu of 2" ball (for TR100L)Pintle hitch in lieu of 2" ball (for TR100L)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG74T-R♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 37203 $ 85,755.00
RETAIL ♣ TR100L $ 5,340.00 ♣ 25510FO $ 280.00 ♣ 23046FO $ 100.00 ♣ 26036FO $ 60.00 ♣ 40321 $ 425.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG74T-R Self Propelled Stump Cutter - Radio Remote Control
EQUIPMENT AND OPTIONS
STANDARD UNIT:Cummins QSF3.8 diesel engine (Tier 4 Final)Massive 3.8L engine produces 74hp and 295ft-lbs peak torqueDOES NOT require DEF (Diesel Exhaust Fluid)DOES NOT utilize DPF (Diesel Particulate Filter)Rubber track undercarriage with 9.8-inch (250mm) track widthUndercarriage retracts for travel thru 36-inch gatesOverall 51-inch working width/35-inch retracted widthTwo speed ground travelRadio remote control with electric over hydraulic controlsNon-marking, counter-rotating rubber tracksQuick Stop cutter wheelHydrostatic, variable rpm cutter wheel drive system28" diameter x 1" thick cutter wheel40 Rayco Super Tooth cutting tools
F.O.B. Shipping Point
Maintenance Kit
Auxiliary chip retainer curtainsHour-meterFuel gaugeCommand CutBack fill blade w/fold-out wings allows travel thru 36-inch gatesPositive lock securing system (trailer hook up)European compliant
2-5/16" Bulldog ball hitch in lieu of 2" ball (for TR100L)Pintle hitch in lieu of 2" ball (for TR100L)
Safety / Sales Kit
OPTIONS:Tandem axle trailer (2" ball hitch)Hitch extension - 18" (for TR100L trailer)
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22
Sold To: Ship To:
Quote Date: Customer P.O. Requested:
Contact: Contact #: Delivery Instructions:
Preparer: Terms:
Part Number♣ RG74DXH♣♣♣♣♣♣♣♣♣♣♣♣♣♣♣ RETAIL♣ 37809 $ 70,640.00
RETAIL♣ 24459FO $ 1,320.00 ♣ 27277FO $ 60.00 ♣ 8612 $ 525.00 ♣ 761905 $ 50.00
P.O. Box 1000, Winn, Michigan, 48896Telephone: 989-866-2381
Fax: 989-866-2280www.morbark.com
Quote No.
2020 Rayco RG74DXH Tow-Behind Stump Cutter
EQUIPMENT AND OPTIONS
STANDARD UNIT:Cummins QSF3.8 diesel engine (Tier 4 Final Emissions)Peak horsepower 74hp / Peak torque 295ft-lbsSwing out operator control stationSpring centering control valve finger-tip control levers60" telescoping tongueQuick Stop cutter wheelHydrostatic, variable rpm cutter wheel drive system28" diameter x 1" thick cutter wheel40 Rayco Super Tooth cutting toolsRubber chip retainer curtains2 5/16" Bulldog ball hitchAdjustable hitch heightTires: (2) 235-75R17.5H 6,000lbsSteel bolt-on fenders
Auxiliary chip retainersCoiled electrical connection harness adapter (6 way to 7 way male)
F.O.B. Shipping Point
Hydraulic jack standHour meterSales / Safety Kit
OPTIONS:Hydraulic surge brakesPintle hitch
EFFECTIVE 8/14/2020
Morbark/Rayco-Price List 8-14-2020Educational Services Commission of New Jersey
NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25
Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22