model/modelo: 1651088 wm.com assembly instructions

11
MODEL/MODELO: 1651088 WM.COM INSTRUCCIONES DE ARMADO ASSEMBLY INSTRUCTIONS TM ATTENTION Contact MD Sports Customer Service DO NOT RETURN TO THE STORE * For additional resources and Frequently Asked Questions, please visit us at themdsports.com ATENCIÓN Contacto MD Sports Servicio al Cliente NO DEVOLVERLO A LA TIENDA * Por mayor información y Preguntas Frecuentes, favor visitarnos en themdsports.com

Upload: others

Post on 03-Feb-2022

3 views

Category:

Documents


0 download

TRANSCRIPT

MODEL/MODELO: 1651088

WM.COM

INSTRUCCIONES DE ARMADOASSEMBLY INSTRUCTIONS

TM

ATTENTION

ContactMD Sports

Customer Service

DO NOT RETURNTO THE STORE

* For additional resources and FrequentlyAsked Questions, please visit us

at themdsports.com

ATENCIÓN

ContactoMD Sports

Servicio al Cliente

NO DEVOLVERLO A LA TIENDA

* Por mayor información y PreguntasFrecuentes, favor visitarnos en

themdsports.com

EspañolEnglish

GARANTÍA LIMITA DE 90 DIASLIMITED 90 DAYS WARRANTY

(Continúe en la siguiente página.) www.themdsports.com1651088 1(Continued on the next page.)

This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.

The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or neglect.

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to another.

A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For allrequests for warranty service, please feel free to contact ourConsumer Service Department at :

WEBSITE: www.themdsports.com

Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!

PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE.

Este producto está cubierto por una garantía efectiva de 90 días a partir de la fecha de su compra. Durante el periódo límite de la garantía, si una parte defectuosa o quebrada es encontrada, nosotros ofreceremos una reparación o un reemplazo de la partes sin ningún costo para ud, nuestro cliente. Las únicas excepciones de la garantía incluyen unidad principals, tableros de mesa, superficies, pilas o herramientas.

La susodicha garantía no se aplicará en los casos de daños y perjuicios debido al uso impropio, la alteración, el mal uso, el abuso, el daño accidental o la negligencia.

Esta garantía limitada le da a usted derechos legales específicos, usted también puede tener otros derechos que varían de un estado (provincia) a otro.

EL RECIBO DE LA COMPRA (U otra prueba de compra) sería requerida antes que cualquier servicio de garantía fuera iniciada. Para todo pedido por servicio de garantía, por favor siéntase libre de ponerse en contacto con nuestro Departamento de Servicio de Consumidor en:

WEBSITE: www.themdsports.com

Por favor tenga atención sobre el Límite de Garantía de su producto de la política de vuelta/reembolsa desde la tienda, Nosotros, Medal Sports, no podemos manejar el producto que está fuera del límite de garantía ya que proporcionamos solamente partes disponibles. ¡Gracias!

POR FAVOR PÓNGASE EN CONTACTO CON NOSOTROS ANTES DE DEVOLVER EL PRODUCTO A LA TIENDA.

1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant. Failure to do so will result in a delay in shipping parts to you.

2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly. For questions that may arise or for missing/damaged parts, please contact us.

3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy.

1 - Por favor deje su nombre, dirección, número telefónico, número de modelo, partes necesarios a la máquina contestadora si no fuera atendido. El fracaso de hacer así le causará un retraso del envío de partes.

2 - Por favor revise la lista de piezas de repuesto y asegúrese de que tiene todas las piezas antes de comenzar el montaje. Para preguntas o para piezas que no se hayan incluidos/dañadas, por favor pongase en contacto con nosotros.

3 - Ya que usted construye todas las mesas al revés, por favor inspeccione las partes superiores de mesa o superficies de juego enseguida antes de poner juntos, que todo tableros de mesa/superficies dañado tiene que ser devuelto a la tienda. Por favor comunique con el minorista por su política de devolución.

¡AVISO!NOTICE!

STAPLE YOUR RECEIPT HERE / GRAPA SU RECIBO AQU

EspañolEnglish

(Continúe en la siguiente página.) www.themdsports.com1651088 2(Continued on the next page.)

CAUTION !

ASSEMBLY TIPS

TOOLS REQUIREDPhillips Screwdriver - Not IncludedStandard (Flat Head Screwdriver) - Not IncludedAllen Key - Included

Electric Screwdrivers may be helpful during assembly; however, please set a low torque and use extreme caution.

1 - This product is intended for INDOOR use only.

2 - Please do not sit, climb or lean on the product.

3 - Please do not drag the product when moving it in order to avoid damaging the legs.

4 - Please only use spray furniture polish to clean the exterior surfaces of the product.

5 - This is not a child's toy, adult supervision is required for children playing this game.

WARNING:

WARNING: Adult Assembly Required.

IMPORTANT NOTICE!

Power Tools - Set Low Torque

High Torqueover tightened

1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid damage or injury. For the assembly, at least two adults are required.

2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each assembly step.

Destornillador Phillips - No incluidoDestornillador de Cabeza Plana - No incluidoLlave Allen - Incluido

Los destornilladores eléctricos pueden serde gran ayuda durante el ensamblado; sinembargo, por favor ajuste el par de girobajo y sea extremadamente precavido.

PELIGRO DE ASFIXIO - - Este artículo contiene piezas pequeñas y / o pequeñas bolas. No apto para menores de 3 años.

ADVERTENCIA: Las tareas de montaje debe realizarlas un adulto.

Herramientas Necesarias

CONSEJOS PARA EL ENSAMBLADO

ADVERTENCIA:

1 - Este producto está destinado para el uso INTERIOR solamente.

2 - Por favor no sientes, subas o inclínes la producto.

3 - Por favor no arrastres el producto cuando está moviendo para evitar el daño sobre las piernas.

4 - Por favor use solamente pulimento de rociar para muebles para limpiar la superficie exterior del producto.

5 - Esto no es un juguete de niños, se requieren la supervisión adulta para niños cuando está jugando este juego.

¡AVISO IMPORTANTE!

1 - Por favor lea las instrucciones con cuidado y siga todo durante el montaje, la operación y instrucciones de seguridad correctamente para evitar el daño o la herida. Para el montaje, por lo menos se requieren dos adultos.

2 - Algunas figuras o dibujos podrían parecer no estén exactamente como su producto. Por favor lea y entienda el texto antes de iniciar cada paso del montaje.

¡PRECAUCI N!

Adultos fuertes necesarios

No tener niños en el area de ensamble

Mantener alejados a los animales domesticos del area de ensamble

No usar o guardar el producto en el exterior. Solo para uso en interior.

No utilizar ni guardar el producto en lugares humedos o mojados

Strong Adults Needed No Children inAssembly Area

Keep away from pets Do not use or keep product outdoors. For indoor use only.

No wet/humid conditions.

X 4

EspañolEnglish

www.themdsports.com1651088 3 (Continúe en la siguiente página.)(Continued on the next page.)

9 10 11 12

13 14 15 16

2 3 4

Mainframe Right Leg Left Leg Pata Izquierda

Base Board Tabla de Base

1

x1 x2 x2 x1

6 7 85

x1 x2

x2 x2

x8

x1

18 19 20

x44 x12x8

x4

x4 x4

17

1651088 PARTS LIST / LISTA DE PARTES

x2x2

Support Brace - A

Door

M8 Washer Arandela M8

Puerta End Leg Brace Abrazadera de Pata de Punta

F4x51mm Screw Tornillo F4x51mm Tornillo F3x25mm

Unidad Principal Pata DerechaAbrazadera de

Soporte - A

x1

Knob Perilla Leg Leveler Niveladorde Pierna

F3x25mm Screw Cerrojo 5/16"x1-1/4"5/16"x1-1/4" Bolt

Cerrojo 4x38mm 4x38mm Bolt

x2

22 23 24

x4

21

x28x4Resbaladillade MarcadorSlide Scorer

x4

26 27 28

x2

25

x2x12Lock Cerradura Bracket Corchete

x12

30 31 32

x1

29

x4 x4Round

Puck - RedPuck

Redondo - Rojo

x4Round

Puck - BluePuck

Redondo - AzulArenaSand

Tornillo F3x16mmF3x16mm ScrewCorchete “L”“L” Bracket

Cerrojo1/4"x1-1/2"1/4"x1-1/2" Bolt

M5 Washer Arandela M5

M6 Washer Arandela M6

T3x14mm Screw Tornillo T3x14mm

Cerrojo 5/16"x1"5/16"x1" Bolt

Support Brace - B Abrazadera deSoporte - B

Support Brace - C Abrazadera deSoporte - C

Support Brace - D Abrazadera deSoporte - D

Support Brace - E Abrazadera deSoporte - E

Support Brace - F Abrazadera deSoporte - F

INSTRUCCIONES DE ENSAMBLAJEASSEMBLY INSTRUCTIONS:1. Encuentre un lugar limpio, plano para comenzar el montaje de su Tabla de Puntaje de Juego. Recomendamos dos adultos trabajen juntos para montar este Tabla de Puntaje de Juego.

2. Quite todas las partes de la caja y verifique que están todas las partes catalogadas como mostrado en la página de lista de partes. Con cuidado de cortar o rasgar los cuatro rincones de caja de modo que el fondo de la caja podría ser usado como su superficie de trabajo.

1. Find a clean, level place to begin the assembly of your Score Table Game. We recommend that two adults work together to assemble this Score Table Game.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts list pages. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.

EspañoltEnglish

www.themdsports.com1651088 4 (Continúe en la siguiente página.)(Continued on the next page.)

33

x1

1651088 PARTS LIST / LISTA DE PARTES

P1

1651088 PRE-INSTALLED PARTS / PIEZAS PREINSTALADAS

P3P2 P4

Tuercade Barril M6

P5

x8

M6 Barrel Nut M8 Square Nutwith Screws

Tuerca CuadradaLock Seat

con Cerrojos M8

x12T - Tuerca M8M8 T - Nut

x4x4M12 Square Nut

with ScrewsTuerca Cuadradacon Tornillos M12

Logo Plate Placa de logotipo

x1

Allen Key Llave Allen

www.themdsports.com1651088 5 (Continúe en la siguiente página.)(Continued on the next page.)

EspañolEnglish

FIG.13. Attach the Left Legs (#3) to the Locks (#27) using two

Screws (#29) per Left Leg. See FIG. 1.

FIG.13. Pegar las Patas Izquierda (#3) a las Cerraduras(#27)

usando 2 Tornillos (#29) por Pata Izquierda. Vea la FIG. 1.

FIG.24. Attach the End Leg Braces (#10) to the Legs (#2 & #3) using three Bolts (#25) and three Washers (#26) per Leg. See FIG. 2.

FIG.24. Pegar las Abrazaderas de Pata de Punta (#10) a las

Patas (#2 & #3) usando 3 Cerrojos (#25) y 3 Arandelas (#26) por Pata. Vea la FIG. 2.

27

29

3

P1

FIG. 2X 22

X 2

X 12

10

25

X1226

X 2P1

X 12P3

3

2

10

26

25

P1

P3

FIG. 1

X 23

X 2

X 4

27

29

X 2P1

X 133

www.themdsports.com1651088 6 (Continúe en la siguiente página.)(Continued on the next page.)

EspañolEnglish

FIG. 3X 412

X 1614

FIG.46. Attach the Brackets (#28) to the Doors (#9) using two Screws (#23) Bracket. See FIG. 4.

FIG.46. Pegar las Corchetes (#28) a la Puertas (#9) usando 2

Tornillos (#23) por Corchete. Vea la FIG. 4.

FIG.35. Attach the Support Braces - F (#12) to the Legs (#2 & #3) using four Screws (#14) per Support Brace - F. See FIG. 3.

FIG.35. Pegar las Abrazaderas de Soporte - F (#12) a las

Patas (#2 & #3) usando 4 Tornillos (#14) por Abrazadera de Soporte - F. Vea la FIG. 3.

12

14

12

FIG. 4X 29

X 423

X 228

28

23

9

www.themdsports.com1651088 7 (Continúe en la siguiente página.)(Continued on the next page.)

EspañolEnglish

21 FIG. 5X 4

X 1223

FIG.68. Attach the FIG. 5 Assembly to the Right Legs (#2) using

six Screws (#23) per Right Leg. See FIG. 6A.

9. Insert the Support Braces - E (#11) into the grooves of the Legs. See FIG. 6.

10. Attach the Knobs (#19) to the Doors (#9) using one Bolt (#17) and one Washer (#18) per Knob. See FIG. 6.

FIG.57. Attach the “L” Brackets (#21) to the Doors (#9) using

three Screws (#23) per “L” Bracket. See FIG. 5A.

FIG.57. Pegar las Corchetes “L” (#21) a la Puertas (#9) usando

3 Tornillos (#23) por Corchete “L”. Vea la FIG. 5A.

FIG.68. Pegar la Montaje FIG. 5 a las Patas Derecha (#2) usando

6 Tornillos (#23) por Pata Derecha. Vea la FIG. 6A.

9. Introducir las Abrazaderas de Soporte - E (#11) en las ranuras de las patas. Vea la FIG. 6.

10. Pegar la Perillas (#19) a la Puertas (#9) usando 1 Cerrojo (#17) y 1 Arandela (#18) por Perilla. Vea la FIG. 6.

9

21

23

FIG. 5A

NOTE: Align the screw holes in“L” Brackets (#21) and Doors; then insert the screw into the holes.NOTA: Alinear los hoyos de tornillo en los Soportes “L” (#21) y Puertas; luego inserir el tornillo en los hoyos.

NOTE: Align the screw holes in“L” Brackets (#21) and Doors; then insert the screw into the holes.NOTA: Alinear los hoyos de tornillo en los Soportes “L” (#21) y Puertas; luego inserir el tornillo en los hoyos.

FIG. 6X 411

X 217

X 218

X 219

X 1223

FIG. 6A

18

19

17

23

11

11

FIG. 3 Assembly/ Montaje FIG. 3

FIG. 5 Assembly/ Montaje FIG. 5

9

2

www.themdsports.com1651088 8 (Continúe en la siguiente página.)(Continued on the next page.)

EspañolEnglish

FIG. 7X 14

X 15

X 16

X 28

X 1214

X 4P2

FIG. 8 X 1614

X 17

FIG.812. Attach the Base Board (#7) to the FIG. 7 Assembly using sixteen Screws (#14). See FIG. 8.

FIG.812. Pegar la Tabla de Base (#7) a la Montaje FIG. 7 usando 16 Tornillos (#14). Vea la FIG. 8.

FIG.711. Attach the Support Braces (#4 & #5 & #6) to the Support Braces (#8) using twelve Screws (#14). See FIG. 7.

FIG.711. Pegar las Abrazaderas de Soporte (#4 & #5 & #6) a las Abrazaderas de Soporte (#8) usando 12 Tornillos (#14) Vea la FIG. 7.

14

5

4

8

6

8

P2

14

7

FIG. 7 Assembly/ Montaje FIG. 7

EspañolEnglish

www.themdsports.com1651088 9 (Continúe en la siguiente página.)(Continued on the next page.)

FIG.913. Attach the FIG. 6 Assembly to the Mainframe (#1) using two Bolts (#15) and two Washers (#16) per Leg. See FIG. 9A.

14. Screw the Leg Levelers (#20) into the bottom of each Legs. See FIG. 9.

15. Lift the table assembly from the floor with four adults, turn it over, and set the table on its leg in the location where you will play.

FIG.913. Pegar la Montaje FIG. 6 a la Unidad Principal (#1) usando 2 Cerrojos (#15) y 2 Arandelas (#16) por Pata. Vea la FIG. 9A.

14. Atornille los Niveladores de Pierna (#20) en el fondo de cada Patas. Vea la FIG. 9.

15.Cuatro adultos fuertes levantan la mesa del suelo, le dan la vuelta, y la ponen de pie sobre sus propias patas en el lugar donde usted jugará.

NO APOYES LA MESASOBRE SUS PIERNAS

AGARRE LAMESA

NO AGARRES LAS PIERNAS DO NOT LEAN THETABLE ON ITS LEGS

HOLD TABLEAGARRE LAMESA

HOLD TABLE DO NOT HOLD THE LEGS

CAUTION: Four strong adults are recommended to turn the table over as shown. 1. Lift the table off the ground. 2. Turn the table over.3. Place it on all four feet at the same time on the ground.

PRECAUCION: Recomienda voltea la mesa por cuatro adultos fuertes como mostrado.1.Levante la mesa desde el piso.2.Voltee la mesa.3.Coloque los cuatro pies de la mesa sobre el piso al mismo tiempo.

FIG. 9X 11

X 815

X 816

X 420

X 8P4

FIG. 6 Assembly/ Montaje FIG. 6

20

1516

1

P4

FIG. 9A

www.themdsports.com1651088 10 (La ultima página)(The last page)

EspañolEnglish

FIG.1016. Attach the FIG. 8 Assembly to the FIG. 9 Assembly using four Bolts (#24) and four Washers (#16). See FIG. 10A.

17. Attach the Slide Scorers (#22) to the Mainframe (#1) using two Screws (#13) per Slide Scorer. See FIG. 10.

FIG.1016. Pegar la Montaje FIG. 8 a la Montaje FIG. 9 usando 4 Cerrojos (#24) y 4 Arandelas (#16). Vea la FIG. 10A.

17. Pegar las Resbaladilla de Marcadors (#22) a la Unidad Principal (#1) usando 2 tornillos (#13) por Resbaladilla de Marcador. Vea la FIG. 10.

YOU ARE NOW READY TO PLAY! ¡USTED ESTA AHORA LISTO PARA JUGAR!

X 813

X 416

X 422

X 424

X 1P5

FIG. 10

13

22

P5

1

3

101

OFF 7

7 88

10OFF

102

2

3

7

788 1

1

10

2

2

FIG. 8 Assembly/ Montaje FIG. 8

FIG. 9 Assembly/ Montaje FIG. 9

2416

FIG. 10A