model no. : id-599 · presentation mode support idea for medical system, ticket system, pos, kiosk...

Model No. : ID-599

Fixed mount 2D Barcode Scanner

Compact Fixed CCD Barcode Scanner

ID-5�9 Series Specification

IDENTICAL snc, Via Della Beverara 9, I-40131 Bologna (BO), [email protected], TEL: + 39 051 619 5706, FAX: +39 051 618 3154, http://www.identificationsolution.com

Features :

The ID-599 is a compact high performance 2D reader. Its small size makes it ideal for most fixed applications. The ID-599 provides these features : Omnidirectional barcode reading Scan rate of up to 200 scans per second in linear emulation mode or 60

seconds per second in omnidirectional modePresentation mode support

Idea for Medical system, ticket system, POS, Kiosk

Technical Overview

-599 view

Technical Specifications

Physical Specifications : Size : 46.2W x 27.9Hx69.8L mm

Weight : 55g without cable

ID


Environmental Specifications

Operating Temperature -20°C to 60°C ( -4°F to 144°F)

Storage Temperature -30°C to 60°C ( -22°F to 144°F)

Relative humidity 0 to 95% non-condensing

Ambient light Works in any lighting conditions from 0 to 100 000 lux

Electrical Specifications

Operating voltage ±5V

Operating current 430mA ( light on for scanning )

Idle-1 ( Presentation mode enable ) 200mA ( no light on )

Idle-2 (Supply power only ) 50mA ( no presentation mode )

Scanning Performance

Scan rate

2D mode

Linear emulation mode

60 images per second, auto adaptive

200 images per second, auto adaptive

Scan angle

Horizontal

Vertical

Diagonal

30°

25.5°

44.7°

Optical resolution

Active pixels

Physical pixels

Pixel size

Exposure time

Light source

Aiming beam

Frame rate

752x480 ( 360 960 ) pixels, monochrome 256 gray levels

752 x 480

782 x 492

6.0 μm x 6.0 μm

>33 μ[email protected] MHz

617nm highly visible LED

617nm highly visible LED

30-60 fps

Print contrast Down to 25%


mailto:μ[email protected]

Reading Distances – Normal lens

All distances are measured from the front of scanner window.


HighDensityLens


Decoder performance

4-1 Reading barcode format : 1D : EAN/UPC, RSS, Code 39, Code 128, UCC/EAN 128, ISBN,

ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5, Codabar,

Code 93/93i, Code 11, MSI, Plessey, Telepen, Postal Codes

2D : Data Matrix, PDF417, Micro PDF 417, Maxicode, QR, micro QR,

Aztec, EAN, UCC composite, GS1

4-2 Operation mode : Offer seven kind of scanning mode for different usage. Such as

presentation mode for none-trigger, Good–read off mode for power

saving…etc.

4-3 Beep sound adjustment : Include power-on music On/Off, Good-read beep ON/Off, adjustable

beep loudness & tone .

4-4 Truncate / Insert digits : Easy to truncate leading or ending over 15 digits where do you want

and insert over 8 characters in your barcode data.

4-5 Setting configuration : By programming manual or download setting command via RS-232C

or USB COM interface.

Output Interface support

This ID-599 series support USB COM, USB HID and RS232 interface.

5-1 USB interface :

There are two kind of USB interface : USB-COM and USB-HID. USB-COM is

with a USB connector but virtual COM signal, so user will need to install software

driver. And our driver support Windows 8 64bit. Our USB COM don’t support

iOS, Linux. Our USB-HID is standard HID1.1 spec. which is support plug and

play function. It can support Windows and Mac.

5-2 RS-232 interface:

Normally RS-232 interface has two architecture applications. One is standard

negative RS-232 voltage level (±12V), and the other is customized positive

RS-232 TTL voltage level ( +5V or 3.3V). For the long distance or standard

application you need negative RS-232 architecture interface. Others you can select

positive RS-232 TTL structure for saving some voltage conversion circuit and IC

chips both on your system and CM-2D302. Please refer to some technical

application documents for more detail introduction about the differences.


5-3 Interface connector pin-out description: ( It is in the scanner inside, for user

who may connect the signal out from scanner )

-599 is with JST 9pin 1.5mm pitch connector for I/O applications.

The pin-out function for different interface is as below:

USB (USB-COM,USB-HID) interface mode:

Symbol Pin In/out Description

VCC 1 I DC 3.3V-5.25V Power supply input.

NC 2 --- No connection.

NC. 3 --- No connection.

NC. 4 --- No connection.

USB D- 5 I/O USB D- signal output signal.

USB D+ 6 I/O USB D+ signal output signal.

Reserved 7 --- Reserved. Keep No connection.

Trigger# 8 I System trigger “ON” input. Active Low.

GND 9 I Ground input.

RS-232 interface mode:

Symbol Pin In/out Description

VCC 1 I DC 5V Power supply input.

NC 2 --- No connection.

TXD 3 O TXD RS-232 output signal.

RXD 4 I RXD RS-232 input signal.

CTS 5 I CTS RS-232 input signal.

RTS 6 O RTS RS-232 output signal.

Reserved 7 --- Reserved. Keep No connection.

Trigger# 8 I System trigger “ON” input. Active Low.

GND 9 I Ground input.

ID


Size and mount instruction

Mount instruction:


Stand installation :


RS232 cable , DSBU 9 pin, 9th

pin VCC +5V, with DC jack


model no. : id-599 · presentation mode support idea for medical system, ticket system, pos, kiosk...

Documents