model k202 with options - lets bv en/k202_english.pdf · 2017. 9. 12. · 8251 kk dronten fax:...
TRANSCRIPT
-
The heating of the water in the main tank can be done by injection of steam, electric, or by an immersion heat exchanger. This exchanger can be fed by an oil or gas boiler. It is possible to choose for either hot or cold rinsing. Cold rinsing requires a longer drying time for the crate and the water is not recirculated. Hot rinsing shortens the drying time of the crate and the water is recirculated into the main tank.
Small electric immersion heater
Immersion heat exchanger
Immersion heat exchanger
With electric Steam injector in tank
Hot or cold rinse hot hot hot, integrated exchanger
cold / hot possible
hot with injector
Rinse water recirculated recirculated recirculated not recirculated recirculated
Continuous hot water supply 10 l/m 8 l/m n/a n/a n/a
Continuous cold water supply
n/a n/a 8 l/m 25 l/m steam 4-6 bar
Cold water supply(pre-wash)
3 l/m 3 l/m 3 l/m 3 l/m 3 l/m
Min. temp. water supply 70 oC 60 oC n/a n/a n/a
Power input connector 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr
Fuse protection 35 A 35 A 35 A 63 A 35 A
Compressed air supply (pre-wash
200 l/m 200 l/m 200 l/m 200 l/m 200 l/m
Vapour extraction (option) diameter 250 mm diameter 250 mm diameter 250 mm diameter 250 mm diameter 250 mm
Capacity drainage 100 l/m 100 l/m 100 l/m 100 l/m 100 l/m
Bedrijfsweg 33 Tel: +31 (0)321 38 66 00
8251 KK Dronten Fax: (0321) 31 53 87
Email: [email protected] Website: www.letsbv.nl
Contact details:
Possible ways of heating bvLETS Your professional partner in cleaningsystems
Crate washerModel K202 with options
K202 FC (option: dirt
knock-out shelf)
K202 VS FC (with pre-wash;
option: dirt knock-out shelf)
Your professional partner in cleaningsystemsLETS bv
Standard
Specifications are subject to change without notice
k202_engels.indd 1-2 21-11-2012 13:53:17
-
Your professional partner in cleaningsystemsLETS bv
Your professional partner in cleaningsystemsLETS bv
CoversThe covers can be opened easily which makes the machine very accessible for
cleaning and maintenance.
Rinse sectionQuick release supply pipes with 56 jet
nozzles. The crates are washed from all sides by the high impact jetting from these
nozzles: the cleaning cycle washes both the inside and outside of the crate. The spray
angle of the nozzles is adjustable.
FiltersThe water is filtered and recycled through
a stainless steel sieve. Optional: a self-cleaning wedge wire screen.
K202 FC
QualityRobust construction with heavy gauge
304 grade stainless steel materials.
FinishAll seams have been welded and machined:
in compliance with HACCP, BRC and EHEDG criteria.
compact and robust
Main wash sectionVariable water temperature from
40oC to 65oC. Every side of the crate is washed from all angles.
Water tankFitted with integrated electric immersion
heater which can be switched on before the pump is engaged. This makes it possible to
pre-heat the water supply.
Detergent metering pumpThis pump regulates the proportional
addition of detergent to the water in the main tank for an excellent wash result.
Technical data
Capacity crates/hour 400 - 850
Dimensions, l x w x h, mm 2500 x 900 x 1600/2500
Free tunnel passage, w x h, mm 600 x 300
Power wash pump 5.5 kW
Maximum capacity 40 m3/h
Maximum pressure 300 Kpa
Required heating oil or gas boiler, hot water generator or steam injector
Dirt knock-out shelfLarge pieces of pollution will be removed before the start of the washing cycle. This prevents the early pollution of the washing
water in the main tank.
K202 FC without options
Strong stainless steel chain conveyor with ridges.
Simple control panelProtected by safety handles.
Options
Pre-washCrates are rinsed with cold water
combined with compressed air jetting: the manual pre-wash of the crates
and trays is no longer required. It also prevents foaming of the water in the
main tank.
Overhead railMakes single-person operation possible.
The dirty crates are loaded into the machine and come back clean over
the top. The cover can still be opened, though.
Specifications are subject to change without notice
k202_engels.indd 3-4 21-11-2012 13:54:00
-
The heating of the water in the main tank can be done by injection of steam, electric, or by an immersion heat exchanger. This exchanger can be fed by an oil or gas boiler. It is possible to choose for either hot or cold rinsing. Cold rinsing requires a longer drying time for the crate and the water is not recirculated. Hot rinsing shortens the drying time of the crate and the water is recirculated into the main tank.
Small electric immersion heater
Immersion heat exchanger
Immersion heat exchanger
With electric Steam injector in tank
Hot or cold rinse hot hot hot, integrated exchanger
cold / hot possible
hot with injector
Rinse water recirculated recirculated recirculated not recirculated recirculated
Continuous hot water supply 10 l/m 8 l/m n/a n/a n/a
Continuous cold water supply
n/a n/a 8 l/m 25 l/m steam 4-6 bar
Cold water supply(pre-wash)
3 l/m 3 l/m 3 l/m 3 l/m 3 l/m
Min. temp. water supply 70 oC 60 oC n/a n/a n/a
Power input connector 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr 400V, 3Ph+N+Gr
Fuse protection 35 A 35 A 35 A 63 A 35 A
Compressed air supply (pre-wash
200 l/m 200 l/m 200 l/m 200 l/m 200 l/m
Vapour extraction (option) diameter 250 mm diameter 250 mm diameter 250 mm diameter 250 mm diameter 250 mm
Capacity drainage 100 l/m 100 l/m 100 l/m 100 l/m 100 l/m
Bedrijfsweg 33 Tel: +31 (0)321 38 66 00
8251 KK Dronten Fax: (0321) 31 53 87
Email: [email protected] Website: www.letsbv.nl
Contact details:
Possible ways of heating bvLETS Your professional partner in cleaningsystems
Crate washerModel K202 with options
K202 FC (option: dirt
knock-out shelf)
K202 VS FC (with pre-wash;
option: dirt knock-out shelf)
Your professional partner in cleaningsystemsLETS bv
Standard
Specifications are subject to change without notice
k202_engels.indd 1-2 21-11-2012 13:53:17