model 751 portable zero air system - teledyne-api.com · model 751 portable zero air system free...
TRANSCRIPT
Model 751 Portable Zero Air System
Free Customer Support by telephone and email for the life of the instrument
8 Portable — under 25 lbs. ready to use
8 Rugged, hand carried case
8 Dew point indicator
8 Silica gel dryer for dew point of -20ºC
8 Long life scrubbers for SO2, NO, NO2, O3, NH3 and H2S
8 Optional CO scrubber
8 Easy disassembly for routine maintenance
8 Two-year warranty
The Model 751 is a fully self-contained portable source of clean, dry
air for use with dilution calibrators. It removes particulate and potential
interferents from ambient air to create zero air suitable for calibration. It
can also be used to provide purge air for permeation tube ovens.
Contained in a high-density plastic travel case, the Model 751 includes
a dew point sensor, an internal oil-free piston pump, and scrubbers to
remove SO2, NO, NO2, O3, NH3 and H2S. An optional high performance
scrubber is available to remove CO. Warm-up time required for use is
just 30 minutes.
The silica gel dryer removes water and produces output with a dew
point of -20ºC up to a 5 SLPM flow rate. The dew point LED indicator
lets you know when desiccant should be replaced. Components are
engineered with a quick dismount from the case to allow rapid periodic
maintenance.
General
Output: 5 SLPM at 30 psig
Max Delivery Pressure: 30 psig
Dew Point: Less than -20ºC (until desiccant saturated)Output Concentration: SO2 < 0.1 ppb H2S < 0.1 ppb NO < 0.1 ppb NO2 < 0.1 ppb NH3 < 0.1 ppb O3 < 0.1 ppb CO < 20 ppb (requires CO scrubber option)
Compressor: Single-cylinder, internal long-life, oil-less piston pump
Electrical Specifications
Power Requirements: 110V-120V, 60Hz (105W) 220V-240V, 50Hz (130W)
Physical Specifications
Operating Temperature Range: 5 - 40ºC
Dimensions (HxWxD): 7” x 18.5” x 14” (178 x 470 x 356 mm)
Weight: 24 lbs (10.9 kg)
Model 751 includes:c Two year warranty
c Internal piston pump
c Silica Gel Dryer
c Long-life scrubbers for SO2, NO, NO2, O3, NH3 & H2S
c Output of 5 SLPM at 30 psig
c Select AC input voltage
c 110V-120V, 60Hz
c 220V-240V, 50Hz
Optional:c CO Scrubber
c Expendables Kit
Specifications How to Order
8
9970 Carroll Canyon Road g San Diego, CA 92131
Ph. 858-657-9800 Fax 858-657-9816
Email [email protected]
Model 751 Portable Zero Air System
The values expressed above are in accordance with EPA definitions. All error specifications are based on constant conditions.
Specifications subject to change without notice.
For more information about the Teledyne API
family of monitoring instrumentation products,
call us or visit our website at:
www.te ledyne-ap i .com© 2016 Teledyne Advanced Pollution Instrumentation
Printed documents are uncontrolled. SAL000080C (DCN 7315) 07.28.16