model 25865 5.8ghz 2-line, cordless handset speakerphone...

108
Model 25865 5.8GHz 2-Line, Cordless Handset Speakerphone/Answering System User’s Guide

Upload: others

Post on 11-Mar-2020

11 views

Category:

Documents


0 download

TRANSCRIPT

Model 258655.8GHz 2-Line, Cordless Handset Speakerphone/Answering System User’s Guide

Important InformationNOTICE: This product meets the applicable Industry Canada technical specifications.The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly important in rural areas.CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.NOTES: This equipment may not be used on coin service provided by the telephone company.

Interference InformationThis equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the radio/television receiver’s antenna, relocate the equipment with respect to the receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualified radio/television technician for additional suggestions. This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations. This device complies with RSS-�10 of Industry Canada. The term “IC:” before the radio certification number only signifies that Industry Canada Technical specifications were met. Operation is subject to the following two conditions: (1) This device may not cause interference, and (�) This device must accept any interference, including interference that may cause undesired operation of the device.

Telephone Network InformationShould your equipment cause trouble on your line which may harm the telephone network, the telephone company, where practicable, may notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately.The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company will likely give you adequate notice to allow you to maintain uninterrupted service.Notice must be given to the telephone company upon termination of your telephone from your line.

REN NumberOn the bottom of this equipment is a label indicating, among other information, the Ringer Equivalence Number (REN) for the equipment. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company.

REN Number is located on the cabinet bottom.

LicensingLicensed under US Patent 6,4�7,009.

Hearing Aid Compatibility (HAC)This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility.

FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of �0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

4

Table of ContentsImportant InformatIon ..........................................2Interference InformatIon ......................................2telephone network InformatIon ........................3ren number ..........................................................3lIcensIng ..................................................................3hearIng aId compatIbIlIty (hac) ........................3fcc rf radIatIon exposure statement .............3IntroductIon ...........................................................6before you begIn ..................................................6

parts checklIst .................................................6telephone Jack requIrements.........................6

InstallatIon .............................................................7dIgItal securIty system ...................................7Important InstallatIon guIdelInes .................7

handset layout ......................................................8base layout .............................................................9InstallIng the phone ..........................................10

InstallIng the handset battery ...................10InstallIng the base statIon ..........................11

InstallIng the backup batterIes on base unIt .........................................11connectIng the base statIon ..................11wall mountIng the base ........................11

base speakerphone set up ................................12speakerphone Volume ..............................12usIng the soft keys .................................12turnIng the answerer(s) on or off .....12

base VoIce/dIsplay prompt language .......13base name .......................................................13base date/tIme ...............................................13

set tIme .................................................14tIme format ..........................................14date format..........................................14set date ................................................14set year ................................................14

tone/pulse ......................................................14base - set local area codes ......................15base rIngers ...................................................15

base rInger Volume .................................15base rInger tone ......................................16

base VIp melody tone ............................16base key tone ...........................................16

answerer setup .............................................17outgoIng announcement ........................17

reVIewIng the outgoIng announcement ..............17recordIng the outgoIng announcement ..............17changIng the outgoIng announcement ..............18

base rIng to answer...............................18settIng the securIty code ......................18forwardIng messages ..............................19

set forwardIng messages .................19forwardIng messages on/off ......19VIew unIt Id.........................................20number of retrIes ...............................20

recordIng qualIty ....................................20handset telephone set up ...............................20

usIng the soft keys .................................20handset dIsplay prompt language ............21handset rIngers ............................................21

handset rInger Volume ..........................21handset rInger tone ...............................22handset VIp melody ................................22handset key tone ....................................22

handset regIstratIon ....................................23handset name ................................................23handset date/tIme ........................................23

set tIme .................................................24tIme format ..........................................24date format..........................................24set date ................................................24set year ................................................24

handset - settIng local area codes ........24basIc operatIon ...................................................25

charge/In use IndIcator ..............................25answerIng a call ..........................................25makIng a call.................................................25flash ................................................................26

5

number redIal ................................................26Volume .............................................................26

base speakerphone .............................26cordless handset ...............................26

mute .................................................................26hold .................................................................27global de-regIstratIon ................................27room monItor ................................................27call transfer .................................................28Intercom operatIon .......................................29

makIng an Intercom call ......................29receIVIng an Intercom call ....................29adVanced Intercom features ..................30

receIVIng an IncomIng call durIng an Intercom call .............30

usIng Intercom wIth external telephone calls .................................30

caller Id (cId) ...................................................32call waItIng caller Id ................................32receIVIng cId records .................................32storIng cId records (In cId memory) .....33reVIewIng call records ...............................33dIalIng a caller Id number ........................33storIng cId records In Internal memory 34deletIng cId records ..................................35

memory .................................................................36storIng a name and number In memory ...36storIng the last number dIaled ................36InsertIng a pause In the dIalIng sequence 37reVIewIng a stored number ........................37changIng a stored number .........................37deletIng records stored In memory .........38dIalIng a number from memory .................38

transferrIng memory ........................................39

answerIng system operatIon ..........................40handset messages IndIcator .......................40screenIng calls from the base ...................40message playback ..........................................40

base unIt ..............................................40handset .................................................41

memory full ...................................................41erasIng messages .....................................41

leaVIng a memo ..............................................42base unIt ..............................................42cordless handset ...............................42

remote access .....................................................43belt clIp and optIonal headset ......................43

connectIng the belt clIp .............................43connectIng an optIonal headset to the handset .......................43

changIng the battery ........................................44battery safety precautIons ..............................44dIsplay messages ................................................45handset sound sIgnals .....................................46troubleshootIng guIde......................................46

caller Id solutIons .................................46telephone solutIons ................................46battery solutIons .....................................47

general product care ......................................48causes of poor receptIon .................................48accessory InformatIon .......................................48serVIce ...................................................................49lImIted warranty................................................49Index .....................................................................51

Table of Contents

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: TOPREVENT FIRE ORELECTRICAL SHOCKHAZARD, DO NOTEXPOSE THISPRODUCT TO RAINOR MOISTURE.

THE LIGHTNINGFLASH AND ARROWHEAD WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OF“DANGEROUSVOLTAGE” INSIDETHE PRODUCT.

CAUTION: TO REDUCE THERISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (ORBACK). NO USERSERVICEABLE PARTS INSIDE.REFER SERVICING TOQUALIFIED SERVICEPERSONNEL.

THE EXCLAMATIONPOINT WITHIN THETRIANGLE IS AWARNING SIGNALERTING YOU OFIMPORTANTINSTRUCTIONSACCOMPANYINGTHE PRODUCT.

CAUTION:

6

IntroductionCAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference.

IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out.

Before You BeginParts ChecklistMake sure your package includes the items shown here.

Base Handset

Belt clip

AC power adaptor

2 Telephone line cords

Handset battery

Battery compartment

door

Telephone Jack RequirementsTo use this phone, you need two RJ11C type modular telephone jacks (one for each Line 1 and Line �), which might look like the one pictured here, installed in your home OR an RJ14 type modular jack. If you need a modular jack, call your local phone company to find out how to get one installed.

Modular telephone line jack

Wall plate

Wall mount bracket

7

InstallationDigital Security SystemYour cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line.

INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances.Certain other communications devices may also use the 5.8 GHz frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 5.8 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems.

Important Installation Guidelines• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave

ovens, heating appliances and direct sunlight.• Avoid areas of excessive dust, moisture and low temperature.• Avoid other cordless telephones or personal computers.• Never install telephone wiring during a lightning storm.• Never install telephone jacks in wet locations unless the jack is specifically designed

for wet locations.• Never touch non-insulated telephone wires or terminals, unless the telephone line has

been disconnected at the network interface.• Use caution when installing or modifying telephone lines.

Handset Layout

intercom (button)handsfree (button)

END/CANCEL (button)

ERASE (button)

redial (button)

*TONE (button)

7 (review button)

TALK/LINE 2/flash 2 (button)

Display

CID 5 or 6/soft key for display prompt

selection(caller ID -/+ button)

soft key for right display prompt

PLAY/STOP (button)

8 (skip button)

#PAUSE (button)

TALK/LINE 1/flash 1 (button)

soft key for left display prompt

9

msg fwrd/memo (message forward/

memo button)

PLAY/STOP 1 and 2

(buttons/indicators)

redial (button)

page (button)

5 or 6 vol (+/- speaker

volume buttons)

delete (button)

Base Layout

intercom (button)handsfree (button)

END/CANCEL (button)

*TONE (button)

7 (review button)

TALK/LINE 2/flash 2 (button)

Display

8 (skip button)

#PAUSE (button)

TALK/LINE 1/flash 1 (button)

charge/in use (indicator)

CID 5 or 6/soft key for display prompt

selection(caller ID -/+ button)

soft key for right display prompt

soft key for left display prompt

10

Installing the PhoneInstalling the Handset Battery

NOTE: You must connect the handset battery before using the cordless handsets.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd) battery model 5-2548, which is compatible with this unit.

1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

�. Locate the battery compartment on the back of the handset.�. Plug the battery pack cord into the jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way.

4. Insert the battery pack.5. Close the battery compartment by pushing the door up until it snaps into place.6. Place the handsets in the charging cradles.Allow handsets to charge for 16 hours prior to first use. If you don’t properly charge the handsets, battery performance is compromised.

black wire

red wire

batterypack

PRESS DOWNFIRMLY

11

Installing the Base StationInstalling the Backup Batteries on Base UnitTo avoid power outage, you can install four AA alkaline batteries (not included in sales) into the base as the backup.1. Remove the battery compartment cover (located on the bottom of the base).�. Follow the battery installation display and insert four AA alkaline batteries inside the

compartment.�. Put the battery compartment cover back into place.

Connecting the Base Station1. Choose an area near an electrical outlet and a telephone wall jack (either two RJ11

or one RJ14 type), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall.

�. Plug the AC power converter into the electrical outlet and the DC connector into the jack on the back of the base.

�. Plug one end of a telephone line cord into the TEL LINE 1 jack on the back of the base and the other end into the modular wall jack for Line 1. Plug the other telephone line cord into the TEL LINE � jack on the back of the base and the other end into modular wall jack for Line �.NOTE: If you have only one wall jack for the both lines, use the TEL LINE 1/L1 + L2 jack on the back of base.

4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying the battery is charging. HANDSET 1 shows in the handset’s display after approximately � minutes.

5. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised.

CAUTION: Use only the 5-2605 power adaptor that came with this unit. Using other power adaptors may damage the unit.

Wall Mounting the Base1. Turn the base over. �. Slide the pedestal into the slots on the bottom of the base, and then push the pedestal

down until it snaps into place.�. Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the

unit into place. (Wall plate not included.)

1�

Base Speakerphone Set UpNOTE: Changing menu settings on the base will only change the settings on the base and changing menu settings on the handset will only change settings on the handset. For example, if you change the language on the handset, it will not change the language on the base.

Speakerphone VolumeUse the vol (5 or 6) buttons to adjust the speaker volume on the base to a comfortable level during a call OR press the TALK/LINE1/flash1, TALK/LINE�/flash� or the handsfree button on the base and then adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum.

Using the Soft KeysOn the base, there are three buttons under the display box which represent several soft key (programmable) functions. Use these buttons to activate the soft key icons that appear in the display. You may program the following items with the soft keys: Ringer, Base Name, Date/Time, Language, Tone/Pulse, Local Area Code and Answerer Setup.

NOTE: During programming, you may press the END/CANCEL button at any time to exit.

Turning the Answerer(s) On or OffNOTE: The Mailbox Answerer(s) must be ON to hear the voice prompts.

1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to ANSWERER SETUP.4. Press the SELECT soft key to confirm.5. Use the 5 or 6 buttons to select MAILBOX 1 or MAILBOX 2 for setting mailbox 1 or

mailbox �. 6. Press the SELECT soft key to confirm.7. Use the 5 or 6buttons to scroll to ANSWER ON/OFF.�. Press the SELECT soft key to enter the menu. ANSWERER ON OFF shows in display.9. Press the 5 or 6buttons to select ON or OFF.10. Press the DONE soft key to confirm. The corresponding PLAY/STOP indicator/button

illuminates.NOTE: The base displays ANSWER OFF and the PLAY/STOP indicator/button is not illuminated when the Mailbox Answerer is OFF.

1�

Base Voice/Display Prompt LanguageThe voice prompt language is the same as the display prompt language. If your voice prompt language is Spanish, the display prompt language is Spanish. If your voice prompt language is French, the display prompt language is French as well. The default prompt language is English.1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to SET LANGUAGE.4. Press the SELECT soft key to confirm.5. Press the 5 or 6 buttons or CHANGE soft key to select ENGLISH, FRANÇAIS or

ESPAÑOL.6. Press the DONE soft key to save the selection.

Base Name1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to BASE NAME.4. Press the SELECT soft key to enter the menu.5. Use the touch-tone pad to enter a name (up to 1� characters). More than one letter

is stored in each of the number keys. For example, to enter Bill Smith, press the � key twice for the letter B. Press the 4 key � times for the letter I. Press the 5 key � times for the letter L. Wait for 1 second, press the 5 key � times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key � times for the letter I. Press the � key for the letter T; press the 4 key twice for the letter H.NOTE: If you make a mistake, press the DELETE soft key to backspace and delete one character at a time.

6. Press the DONE soft key to save.

Base Date/TimeYou may program the following items under the Date/Time menu; Set Time, Time Format, Date Format, Set Date, and Set Year. To access the DATE/TIME Menu:1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to DATE/TIME4. Press the SELECT soft key to confirm.

14

Set TimeFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET TIME.�. Use the touch-tone pad to enter the current time.�. Use the AM / PM soft key to select AM or PM.

NOTE: The AM/PM selection is not available in 24 HOUR CLOCK format.4. Press the DONE soft key to save the selection.

Time FormatFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to TIME FORMAT.�. Use the CHANGE soft key to select 12 HOUR CLOCK or 24 HOUR CLOCK.�. Press the DONE soft key to save the selection.

Date FormatFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to DATE FORMAT.�. Use the CHANGE soft key to select MM/DD or DD/MM.�. Press the DONE soft key to save the selection.

Set DateFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET DATE (MM/DD).�. Use the touch-tone pad to enter the current date.�. Press the DONE soft key to confirm.

Set YearFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET YEAR (YYYY).�. Use the touch-tone pad to enter the year.�. Press the DONE soft key to confirm.

Tone/PulseYou may program independently for LINE 1 and LINE �. 1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to SET TONE/PULSE.4. Press the SELECT soft key to confirm.

15

5. Use the 5 or 6buttons to scroll to LINE 1 or LINE 2 for setting line 1 or line �. 6. Press the SELECT soft key to confirm.7. Use the 5 or 6 buttons to select TONE or PULSE.�. Press the DONE soft key to confirm.

Base - Set Local Area CodesYou can progrom the way the Caller ID records are displayed, for up to five different codes for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx, and etc.1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to LOC AREA CODE .4. Press the SELECT soft key to confirm.5. Press the FORMAT soft key to change the length of the CID records.6. Use the touch-tone pad to enter your �-digit area code.7. Press the DONE soft key to confirm the selection.

Base RingersYou may program the following items independently for LINE 1 and LINE � under the RINGER menu; Ringer Volume, Ringer Tone, Phonebook Tone (VIP) and Key Tone. To access the RINGER Menu:1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to RINGER.4. Press the SELECT soft key to confirm.5. Use the 5 or 6buttons tos to select LINE 1 or LINE 2 for setting line 1 or line �. 6. Press the SELECT soft key to confirm.

Base Ringer VolumeFrom the Ringer Menu:1. Use the 5 or 6 buttons to scroll to RINGER VOLUME. �. Press the CHANGE soft key to select HIGH, MEDIUM, LOW or OFF. �. Press the DONE soft key to confirm.

NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

16

Base Ringer ToneFrom the Ringer Menu: 1. Use the 5 or 6 buttons to scroll to RINGER TONE.�. Press the CHANGE soft key to select.�. Use the 5 or 6 buttons to scroll to the desired setting. You will hear a sample of the

ringer tone you select. 4. Press the DONE soft key to confirm.

NOTE: Ringer Tone 1 through 10 are for dual tone ringer tone and Melody 1 through 10 are for melodies.

Base VIP Melody ToneThis features allow you to assign a specific melody to someone you want to get your attention when the person calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with VIP melody ring. You may choose from ten different polyphonic melodies or 10 ringer tones.

NOTE: This feature ONLY works when the following conditions are met.1. You have subscribed to Caller ID.2. You have your Caller ID record previously transferred to the

memory. (Refer to Storing CID Records in Internal Memory). NO USER MEMORY will show in the display to remind the user to do CID record transfer first.

From the Ringer Menu:1. Use the 5 or 6 buttons to scroll to VIP MELODY.�. Press the CHANGE soft key to select.�. Use the 5 or 6 buttons to scroll to the desired setting. You will hear a sample of the

ringer tone you select. 4. Press the DONE soft key to confirm.

NOTE: Ringer Tone 1 through 10 are for dual tone ringer tone and Melody 1 through 10 are for melodies.

Base Key ToneFrom the Ringer Menu:1. Use the 5 or 6 buttons to scroll to KEY TONE.�. Press the CHANGE soft key to select ON, OFF or LINK TO RINGER.

NOTE: LINK TO RINGER option turns key tones off or on when Ringer Volume is turned off or on.

�. Press the DONE soft key to confirm.

17

Answerer SetupYou can program the following items independently for MAILBOX 1 and MAILBOX � under the ANSWERER SETUP menu; Answer ON/OFF, Outgoing Announcement, Rings to Answer, Security Code, Forwarding Messages, and Recording Quality. To access the ANSWERER SETUP Menu:1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to ANSWERER SETUP.4. Press the SELECT soft key to confirm.5. Use the 5 or 6buttons to select MAILBOX 1 or MAILBOX 2.

Outgoing AnnouncementYou may program the following items under the Outgoing Announcement menu; Reviewing the Outgoing Announcement, Recording the Outgoing Announcement and Changing the Outgoing Announcement.

Reviewing the Outgoing AnnouncementFrom the Answerer Setup Menu: 1. Use the 5 or 6buttons to scroll to ANNOUNCEMENT.�. Press the SELECT soft key to enter the menu. �. Press the 5 or 6buttons to select PLAY.4. Press the SELECT soft key to start playing the announcement. PLAYING

ANNOUNCEMENT shows in display.5. Press the EXIT soft key when you have finished reviewing the announcement.

Recording the Outgoing AnnouncementFor best results when recording, you should be about nine the inches from the microphone, and eliminate as much background noise as possible.From the Answerer Setup Menu:1. Use the 5 or 6buttons to scroll to ANNOUNCEMENT.�. Press the SELECT soft key to enter the menu. �. Press the 5 or 6buttons to select RECORD.4. Press the SELECT soft key to display RECORDING ANNOUNCEMENT.5. Press the YES soft key to record your announcement.

NOTE If do not wish to record an announcement, press the NO soft key.6. Press the END soft key when finished with recording, announcement will play back.

NOTE: To replay the announcement again, press the REPLAY soft key.

1�

Sample Outgoing AnnouncementHi, this is (use your name here), I can’t answer the phone right now, so please leave your name, number and a brief message after the tone, and I’ll get back to you. Thanks.

Changing the Outgoing AnnouncementFrom the Answerer Setup Menu:1. Use the 5 or 6buttons to scroll to ANNOUNCEMENT.�. Press the SELECT soft key to enter the menu. �. Press the 5 or 6buttons to select CHANGE.4. Press the SELECT soft key to enter the menu. CHANGE DEFAULT RECORDED shows in

display.5. Use the 5 or 6buttons to select DEFAULT or RECORDED.6. Press the SELECT button to confirm7. Press the EXIT soft key when you have finished your selection.

Base Ring To AnswerFrom the Answerer Setup Menu:1. Use the 5 or 6 buttons to scroll to RING TO ANSWER.�. Press the SELECT soft key to enter the menu. �. Press the 5 or 6 buttons to select 3 RINGS, 4 RINGS, 5 RINGS, 6 RINGS or TOLL

SAVER.4. Press the DONE soft key to confirm.

NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there are NEW messages, OR the unit answers after the 5th ring if there are NO new messages. This is allows user to access their the answerer from another location and then hang up after 4 rings to save long distance charges.

Security CodeFrom the Answerer Setup Menu:1. Use the 5 or 6 buttons to scroll to SECURITY CODE.�. Press the SELECT soft key to enter the menu. SECURITY CODE 123 shows in display. �. Use the touch-tone pad to enter your new �-digit security code. For example, press the

6, � and � number keys for security code 6��. The default security code is 123.4. Press the DONE soft key to confirm.

19

Forwarding MessagesThis function will automatically forward the answerer’s messages to another phone number which allows you to receive your messages soon after they are left and eliminates the need to call periodically to check for messages remotely. You may program the following items under the Forwarding Messages menu; Set Forward Number, Forward ON/OFF, View Unit ID and Number of Retries.

Set Forwarding MessagesFrom the Answerer Setup Menu:1. Use the 5 or 6 buttons to scroll to FORWARD MSG.�. Press the SELECT soft key to enter the menu. �. Use the 5 or 6buttons to scroll to SET FWD NUMBER.4. Press the SELECT soft key to enter the menu. 5. Use the touch-tone pad to enter the desired number. (Include area code if long

distance number.)NOTE: If you make a mistake press the DELETE soft key to erase the wrong digit(s).

6. Press the DONE soft key to confirm. FORWARD NUMBER STORED shows in display.

Forwarding Messages ON/OFFFrom the Answerer Setup Menu:1. Use the 5 or 6 buttons to scroll to FORWARD MSG.�. Press the SELECT soft key to enter the menu. �. Use the 5 or 6 buttons to scroll to FORWARD ON/OFF. 4. Press the SELECT soft key to enter the menu. FORWARD MESSAGE ON OFF shows in

display. 5. Use the5 or 6 buttons to select ON or OFF. 6. Press the SELECT soft key to confirm.7. To activate setting, press the memo/msg fwrd button on the base. FW ANS shows in

the display. NOTE: Apart from enabling the message forward through the menu, you have to press the msg fwd button on base to activate the Message Forwarding function. Also, the Message Forwarding must be activated for each line, for example if line 1 is set to off and line 2 is set to on, when the msg fwd button is pressed only line 2 will have the Message Forward function activated. FWD ANS ON / ON shows in the display if both lines are activated, if only line 1 is activated FWD ANS ON / OFF shows in the display.

�0

View Unit IDThe unit's identification code number is for reference purposes only.

Number of RetriesIf the line of desired number is busy, answerer will continue to try to forward the messages again (up to three times, depending on selection) at a later time.From the Answerer Setup Menu:1. Use the 5 or 6 buttons to scroll to FORWARD MSG.�. Press the SELECT soft key to enter the menu. �. Use the 5 or 6buttons to scroll to NUM OF RETRIES. 4. Press the SELECT soft key to enter the menu.5. Use the 5 or 6 buttons to select 0, 1, 2 or 3. 6. Press the SELECT soft key to confirm.

Recording QualityChanging the recording quality from High to Medium will increase the total record time of the answering machine, while changing the recording quality from Medium to High will cause the message clarity to be better, but will cause a decrease in the total record time of the answering machine.From the Answerer Setup Menu:1. Use the 5 or 6buttons to scroll to RECORD QUALITY. �. Press the SELECT soft key to enter the menu. �. Use the 5 or 6 buttons to select MEDIUM or HIGH. 4. Press the SELECT soft key to confirm.

Handset Telephone Set UpNOTE: Changing menu settings on the handset will only change the settings on the handset, and changing menu settings on the base will only change the settings on the base. For example, if you change the language on the handset, it will not change the language on the base.

Using the Soft KeysOn the handset, there are three buttons under the display which represent several soft key (programmable) functions. Use these buttons to activate the soft key icons that appear in the display. The following programmable menus are available: Ringer, Registration, Handset Name, Date/Time, Language, and Area Code.

NOTE: During programming, you may press the END/CANCEL button at any time to exit.

�1

Handset Display Prompt LanguageThe default display prompt language is English.1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to SET LANGUAGE.4. Press the SELECT soft key to confirm.5. Press the 5 or 6 buttons or CHANGE soft key to select ENGLISH, FRANCAIS or

ESPANOL.6. Press the DONE soft key to save the selection.

Handset RingersYou may program the following items independently for LINE 1 and LINE � under the RINGER menu; Ringer Volume, Ringer Tone, VIP Melody and Key Tone. To access the RINGER Menu:1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to RINGER.4. Press the SELECT soft key to confirm.5. Use the 5 or 6buttons tos to select LINE 1 or LINE 2 for setting line 1 or line �. 6. Press the SELECT soft key to confirm.

Handset Ringer VolumeFrom the Ringer Menu:1. Use the 5 or 6 buttons to scroll to RINGER VOLUME. �. Press the CHANGE soft key to select HIGH, MEDIUM, LOW or OFF. �. Press the DONE soft key to confirm.

NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

��

Handset Ringer ToneFrom the Ringer Menu: 1. Use the 5 or 6 buttons to scroll to RINGER TONE.�. Press the CHANGE soft key to select.�. Use the 5 or 6 buttons to scroll to the desired setting. You will hear a sample of the

ringer tone you select. 4. Press the DONE soft key to confirm.

NOTE: Ringer Tone 1 through 10 are for dual tone ringer tone and Melody 1 through 10 are for melodies.

Handset VIP MelodyThis features allow you to assign a specific melody to someone you want to get your attention when the person calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with VIP melody ring. You may choose from ten different polyphonic melodies or 10 ringer tones.

NOTE: This feature ONLY works when the following conditions are met.1. You have subscribed to Caller ID.2. You have your Caller ID record previously transferred to the

memory. (Refer to Storing CID Records in Internal Memory). NO USER MEMORY will show in the display to remind the user to do CID record transfer first.

From the Ringer Menu:1. Use the 5 or 6 buttons to scroll to VIP MELODY.�. Press the CHANGE soft key to select.�. Use the 5 or 6 buttons to scroll to the desired setting. You will hear a sample of the

ringer tone you select. 4. Press the DONE soft key to confirm.

NOTE: Ringer Tone 1 through 10 are for dual tone ringer tone and Melody 1 through 10 are for melodies.

Handset Key ToneFrom the Ringer Menu:1. Use the 5 or 6 buttons to scroll to KEY TONE.�. Press the CHANGE soft key to select ON, OFF or LINK TO RINGER.

NOTE: LINK TO RINGER option turns key tones off or on when Ringer Volume is turned off or on.

�. Press the DONE soft key to confirm.

��

Handset Registration1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to REGISTRATION.4. Press the SELECT soft key to confirm. PRESS AND HOLD PAGE BUTTON UNTIL BEEP

shows in the display.5. Press and hold the page button on base unit until you hear a long tone at the handset.

HANDSET X REGISTERED shows in the handset display, where X is the handset number. You will hear a confirmation tone.

If handset displays PLEASE REGISTER, press the OK soft key on the handset and repeat step 5 above.

Handset Name1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to HANDSET NAME.4. Press the SELECT soft key to enter the menu.5. Use the touch-tone pad to enter a name (up to 1� characters). More than one letter

is stored in each of the number keys. For example, to enter Bill Smith, press the � key twice for the letter B. Press the 4 key � times for the letter I. Press the 5 key � times for the letter L. Wait for 1 second, press the 5 key � times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key � times for the letter I. Press the � key for the letter T; press the 4 key twice for the letter H.NOTE: If you make a mistake, press the DELETE soft key to backspace and delete one character at a time.

6. Press the DONE soft key to save.

Handset Date/TimeYou may program the following items under the Date/Time menu; Set Time, Time Format, Date Format, Set Date, and Set Year. To access the DATE/TIME Menu:1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to DATE/TIME4. Press the SELECT soft key to confirm.

�4

Set TimeFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET TIME.�. Use the touch-tone pad to enter the current time.�. Use the AM / PM soft key to select AM or PM.

NOTE: The AM/PM selection is not available in 24 HOUR CLOCK format.

Time FormatFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to TIME FORMAT.�. Use the CHANGE soft key to select 12 HOUR CLOCK or 24 HOUR CLOCK.�. Press the DONE soft key to save the selection.

Date FormatFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to DATE FORMAT.�. Use the CHANGE soft key to select MM/DD or DD/MM.�. Press the DONE soft key to save the selection.

Set DateFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET DATE (MM/DD).�. Use the touch-tone pad to enter the current date.�. Press the DONE soft key to confirm.

Set YearFrom the DATE/TIME Menu:1. Use the 5 or 6buttons to scroll to SET YEAR (YYYY).�. Use the touch-tone pad to enter the year.�. Press the DONE soft key to confirm.

Handset - Setting Local Area CodesYou can progrom the way the Caller ID records are displayed, for up to five different codes for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx, and etc.1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu.�. Use the 5 or 6 buttons to scroll to LOC AREA CODE.

�5

4. Press the SELECT soft key to confirm.5. Press the FORMAT soft key to change the length of the CID records.6. Use the touch-tone pad to enter your �-digit area code.7. Press the DONE soft key to confirm the selection.

Basic OperationCharge/In Use IndicatorThe phone is ON when the LED indicator on the handset and the charge/in use indicator on the base is lit. The handset and base indicators flash when you receive a call.

Answering a Call1. To answer a call press the TALK/LINE1/flash1, TALK/LINE�/flash� or the handsfree

button before you begin speaking.�. To hang up, press the END/CANCEL button on base or handset, or place the handset in

the base cradle.

Making a Call1. Press the TALK/LINE1/flash1, TALK/LINE�/flash� or the handsfree button and dial the

desired number. -OR- Enter the number first, then press the TALK/LINE1/flash1, TALK/LINE�/flash� or the

handsfree button and the number automatically dials.NOTE: Press the handsfree button on the handset during conversation to switch between handset speakerphone and handset earpiece. However, if you press the handsfree button on the base unit during a conversation with the base speakerphone, the call will disconnect.

�. To hang up, press the END/CANCEL button on base or handset, or place the handset in the base cradle.NOTE: When handset is in handsfree mode, placing the handset in the base cradle will change to base handsfree mode. If you want to hang up during handset handsfree mode, you need to hang up by pressing the END/CANCEL button on the handset.NOTE: You may enter up to 32 pre-dial digits.NOTE: If you want to delete the pre-dial number you entered, press the DELETE soft key to erase the digit(s).

�6

FlashUse the TALK/LINE1/flash1, TALK/LINE�/flash� button on base or handset to activate custom calling services such as call waiting or call transfer, which are available through your local phone company.

Number RedialYou may redial a number up to �� digits long. To quickly redial the last number you dialed:1. Press the TALK/LINE1/flash1, TALK/LINE�/flash� or handsfree button.�. Press the redial button. -OR-To choose from the last five numbers you dialed through menu:1. Press the redial button first, then use the 5 or 6 buttons to select the desired redial

number.• Press the 5 button to review the oldest call and scroll toward the most recent calls

(higher numbers).• Press the 6 button to review the newest call and scroll to older calls (lower numbers).

�. Press the TALK/LINE1/flash1, TALK/LINE�/flash� or handsfree button, or the DIAL soft key. The number dials automatically.

VolumeBase Speakerphone Use the vol (5 or 6) buttons to adjust the speaker volume on the base to a comfortable level during a call OR press the TALK/LINE1/flash1, TALK/LINE�/flash� or the handsfree button on the base and then adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum.

Cordless HandsetUse the vol (5 or 6) buttons on the side of the handset to adjust the volume of the handset’s earpiece during a call. There are four settings. Press the right arrow to increase the volume and left arrow to decrease the volume. You will see the volume setting on the handset display. VOL 1 is the minimum and VOL 4 is the maximum.

MuteTo have a private, off-line conversation, use the mute feature. The party on the other end of the line cannot hear you, but you can still hear them.1. During conversation press the MUTE soft key. MUTE ON shows in the display.�. Press the UNMUTE soft key to cancel and return to your phone conversation.

�7

HoldPress the HOLD soft key to put a call on hold. LX ON HOLD shows in the display, where X is the line number.To take a call off hold, press the UNHOLD soft key.

• To switch a call on hold from the base to the cordless handset, press the TALK/LINE1/flash1, TALK/LINE�/flash� or handsfree button on the handset.

Paging the Cordless HandsetThis feature helps you locate a misplaced handset.Press and release the page button on the base. The cordless handset beeps intermittently and displays PAGING FROM BASE for about two minutes or until you press OK soft key on the handset or press page on the base.

NOTE: You may still page the cordless handset even if the ringer is turned off.

Global De-registrationIf one or more handsets become lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to de-register all handsets at the same time.

WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

1. Press and hold the page button on the base until the CHARGE/IN USE indicator on the base flashes.

�. Press and hold the page button on the base again until the CHARGE/IN USE indicator on the base flashes rapidly.

�. Press and release the page button on the base once. All handsets are de-registered and PLEASE REGISTER shows in the handsets' display.

Room MonitorRoom monitoring may be done from the base or the handset. Begin with unit you want to monitor with (the microphone);1. Make sure your phone is OFF (not in talk mode).�. Press the MENU soft key to go to the main menu. �. Use the 5 or 6 buttons to scroll to ROOM MONITOR.4. Press the SELECT soft key to confirm.

��

5. XXX READY TO ROOM MONITOR shows in display, where XXXX is the unit's name.6. Press the intercom button on the unit you wish to listen from. The list of registered

units shows in the display.7. Use the 5 or 6buttons to select the unit you wish to monitor.�. Press the PAGE soft key to confirm. 9. The first unit will then turn on the microphone and the second unit will turn on

earpiece to monitor sound. NOTE: Handsets can be on cradle or off cradle for room monitoring to work.NOTE: While in room monitoring mode, the listening unit will emit an alert tone approximately every 4 seconds if there is an incoming call. You may press the TALK/LINE1/flash1 or TALK/LINE2/flash2 button to quit room monitor and answer the call.NOTE: Press the CANCEL soft key or the END/CANCEL button to exit room monitor mode.

Call TransferDuring an external call, you may transfer the external call from base to handset(s) or vice versa.

NOTE: To cancel the call transfer, you may press END/CANCEL button or intercom button on base.

1. Press the intercom button to put the line on hold. LX ON HOLD shows in the display, where X is the Line number.

�. Use the 5 or 6 buttons to select the desired handset or base.NOTE: If you only have one handset registered in the system, it is paged automatically.

�. Press the END/CANCEL button to transfer the call. TRANSFERRING FROM XXXX (where XXXX is the name of the transferring unit) shows in the receiving unit's display.

4. Press the OK soft key on the receiving unit to answer the call.NOTE: If there is no answer within 2 minutes after transferring the call, then both units receive a call back notification. If neither unit answers within 30 seconds, then the external call will be automatically dropped.

�9

Intercom OperationA two-way intercom is possible between the base and cordless handset(s) without tying up the telephone line and since the telephone line is not used, you can still receive incoming calls.

Making an Intercom Call 1. Make sure the phone is OFF (not in TALK mode).�. Press the intercom button.�. Use the 5 or 6 buttons to select the desired handset or base.

NOTE: If you only have one handset registered in the system, it is paged automatically.

4. Press the PAGE soft key.5. The receiving handset or base is paged, a tone is sounded and the following

information shows in the display:

PAGING

HANDSET 2 EXIT

PAGING FROM

HANDSET 1 OK EXIT

Originating Handset/Base Receiving Handset/Base

When the OK soft key or intercom button on the receiving handset or base is pressed, the page is answered. If the page is not answered after two minutes, NO ANSWER shows in the display of the originating handset or base and the page is cancelled. The unit returns to standby mode.

REMARQUE : If a personalized name is assigned to the handset during registration, then that name is displayed instead of handset number.REMARQUE : To cancel the page, press the EXIT soft key or intercom key on the originating unit.

Receiving an Intercom CallWhen you receive an intercom call, the handset or base beeps. To answer the intercom call, press the OK soft key, the TALK/LINE1/flash1, TALK/LINE�/flash� button or the intercom button.

�0

Advanced Intercom FeaturesReceiving an Incoming Call During an Intercom CallIf you receive a telephone call during an intercom call, both handsets or base will emit alert tone and remain in intercom mode. Either handset or base user may press the corresponding TALK/LINEx/flashx button or the handsfree button to answer the call.

Using Intercom with External Telephone CallsDuring an external telephone call, you can use the intercom function to;

• page another handset and set up a private (�-way) intercom conversation with another user while the telephone call is placed on hold

• create a �-way conversation between the telephone caller, the base, and cordless handsets

• transfer the external telephone call to another handsetTwo-Way Intercom Calls

1. During an external call, press the intercom button on the handset or base and the external call is placed on hold. The list of handsets or base shows in the display.

�. Use the 5 or 6 button to select desired handset or base.�. Press the PAGE soft key to page.

NOTE: The receiving handset or base presses the intercom button or the OK soft key to answer the intercom call. Both intercom users may speak privately. The external caller will not hear the intercom conversation.

4. When finished, press the EXIT soft key or intercom button to end the intercom call, return to the talk mode, and resume your original telephone conversation.

Three-Way callingBetween two handsets or a handset and base and an external call

1. During an external call, press the intercom button on the handset or base and the external call is placed on hold. The list of handsets or base show in the display.

�. Use the 5 or 6 button to select desired handset or base. A tone sounds and PAGING shows in the originating handset or base display. NOTE: PAGING FROM… shows in the display on the receiving handset or base, and the receiving handset or base must press the intercom button or the OK soft key to answer the intercom.

�. When the receiving handset or base connects, press the UNHOLD soft key on the originating handset or base to conference with the receiving handset or base and the external caller. CONFERENCE shows in the display on the originating and receiving handsets.

�1

NOTE: A handset or base can enter conference mode directly by pressing the TALK/LINE1/flash1, TALK/LINE2/flash2 on the second handset or base during a call.

Between a handset or base and external calls on the Line 1 and Line 21. During an external call on either Line 1 or Line �, press the HOLD soft key to put the call

on hold.�. If the originating line is Line 1, press the TALK/LINE�/flash� button. Line 1 icon flashes

and Line � icon shows in the display steadily.

�. Press the CONF soft key to conference with the external call.Transferring External Call to Other Handsets or BaseDuring an external call, you may transfer the external call to another handset or base.

1. Press the intercom button on the originating handset or base to put an external call on hold, and then page the receiving handset or base.

�. The list of handsets or base shows in the display. Use the 5 or 6 button to select desired handset or base.

�. Press the PAGE soft key to start the page. You will hear a paging tone. PAGING shows on the originating handset’s display or base display, and PAGING FROM…. shows on the receiving handset’s display or base display.

4. When the receiving handset connects, press the END/CANCEL or handsfree button on the originating handset or base to transfer the call.

- OR - Press the END/CANCEL or handsfree button on the originating handset or base to

transfer the call. NOTE: If there is no answer within 30 seconds after transferring the call, then both units receive a call back notification and CALL BACK shows on the display. If neither unit answers within 20 seconds, then the external call will be automatically dropped.

��

Caller ID (CID)IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service.

This unit receives and displays CID information transmitted by your local telephone company. This information can include the phone number, date and time; or the name, phone number, and date and time.

Call Waiting Caller IDProvided you subscribe to Call Waiting Caller ID service from your phone company; if you receive an incoming call and you are using the GE multi handset system, a beep indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID information will be displayed and stored in the history of all handsets in the system.• When you hear the call waiting beep in the handset receiver, press the TALK/LINE1/

flash1 or TALK/LINE�/flash� button to put the current call on hold and answer the incoming call. Press the TALK/LINE1/flash1 or TALK/LINE�/flash� again to return to the original call.

Receiving CID RecordsWhen you receive a call, Caller ID information is transmitted by the phone company to your telephone between the first and second ring. The Caller ID information appears on your phone’s display while the phone rings, giving you a chance to monitor the information and decide whether or not to answer the call.

FORMATOPTIONS

09:37 PM 07/24

317-123-4567PETER C HAN

5 O F 6

L1

Time call received

Caller ID/Memory Location

Caller ID phone numberCaller ID name

Date call received

��

Storing CID Records (In CID Memory)If you are not at home or cannot answer, your telephone’s Caller ID memory stores the data for the most recent 40 calls you received so that you can see who called while you were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is automatically deleted.You may review the stored information at any time. Calls received since your last review are marked as NEW in the display. Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display.

Reviewing Call RecordsAs calls are received and stored, the display is updated to let you know how many calls have been received.

NOTE: The CID records can be accessed quickly by pressing the 5 or 6 button while the unit is in standby mode.

1. Make sure the phone is OFF (not in talk mode).�. Press MENU soft key to access main menu.�. Use the 5 or 6 button to scroll to CALLER ID.4. Press the SELECT soft key to enter the menu.5. Press the 6 button to scroll through the call records from the most recent to the

oldest. Press the 5 button to scroll through the call records from the oldest to the newest.

Dialing a Caller ID Number1. Make sure the phone is OFF (not in TALK mode).�. Use the 5 or 6 button to display the desired Caller ID record.�. Press the TALK/LINE1/flash1 or TALK/LINE�/flash� or handsfree button to dial the

number.NOTE: Depending on (a) how the incoming caller’s phone number is formatted when it is received, and (b) whether or not you previously pre-programmed your local area code into the set up menu, you may need to adjust the format of the incoming caller’s stored phone number before making the call. Press the FORMAT soft key while the number is displayed to adjust the number, and try again.

The format option lets you change the format of the displayed number.

�4

Available formats include:Number of digits Explanation Example Eleven digits long distance code “1” + �-digit area code + 7-digit telephone number. 1-�17-���-����Ten digits �-digit area code + 7-digit telephone number. �17-���-����Seven digits 7-digit telephone number. ���-����

NOTE: If the telephone number is corrupted, such as an alphabetical character in a number field, you will hear an error tone and the number is not dialed. Unit displays UNABLE TO DIAL.

Storing CID Records in Internal MemoryYou may transfer a Caller ID record to your phone’s memory.

NOTE: It is important that you format CID records correctly before storing in memory. It is not possible to reformat CID records stored in memory.

1. Make sure the phone is OFF (not in talk mode).�. Press the 5 or 6 button until the desired Caller ID record is displayed.�. Press the OPTION soft key to access the option menu.4. Use the 5 or 6 button to select STORE.5. Press the SELECT soft key to confirm.

NOTE: If using handset; WHICH MEMORY? HANDSET BASE shows in the display. Use the 5 or 6 button to select HANDSET or BASE, and press the SELECT soft key to confirm record location.

6. ENTER NAME shows in the display.7. Use the touch-tone pad to enter a name (up to 1� characters).

NOTE: If you make a mistake press the DELETE soft key to backspace and erase the wrong character(s) or number(s).

�. Press the 6 button to scroll to ENTER NUMBER.NOTE: The system treats PAUSES as delays or spaces in the dialing sequence. Each pause counts as 1 digit in the dialing sequence.

9. Use the touch-tone pad to enter the telephone number (up to �4 digits, including pauses), and press the 6 button to scroll to VIP MELODY.

�5

10. Use the 5 or 6 button or CHANGE soft key to scroll to the desired melody. You will hear a sample of the ringer tone you select.

11. Press the DONE soft key to save the record.

Deleting CID Records1. Make sure the phone is OFF (not in talk mode).�. Press the MENU soft key to access main menu.�. Use the 5 or 6button to scroll to CALLER ID.4. Press the SELECT soft key to confirm.5. Use the 5 or 6 button to scroll to desired CID record.6. Press the OPTION soft key to access the option menu.7. Use the 5 or 6 button to select DELETE and delete only that record. Press the SELECT soft key to confirm the deletion and CALLER ID DELETED shows in

the display. -OR- Use the 5 or 6 button to select DELETE ALL. Press the SELECT soft key. DELETE ALL CID? shows in the display. Press the YES soft key to confirm the deletion. The display shows ALL CALLER ID DELETED.

�6

MemoryThe cordless handset and base each have their own separate memory storage areas. Store fifty 11-character names and �4-digit telephone numbers in the handset and forty 11-character names and �4-digit telephone numbers in the base memories.

NOTE: Memory records are stored and searched in alphabetic order. For example, if a memory record is stored with the name “Beth” and then another memory record is stored with the name “Adam”, the record with the name “Adam” will the be the first record in the memory storage. Each record added might change the order of the records.

Storing a Name and Number in Memory1. Make sure the phone is OFF (not in talk mode). �. Press the MEMORY soft key to enter the phonebook. �. Use the 5 or 6 button to scroll to NEW.

NOTE: On the handset, you can select to store the new entry in either the Base phonebook or Handset phonebook. To choose Base phonebook, press the BASE soft key.

4. Press the SELECT soft key to confirm. ENTER NAME shows in the display. 5. Repeat Steps 5 through 11 in Storing CID Records in Internal Memory6. To enter another name and number in a different memory location, return to step �

and repeat the process.

Storing the Last Number Dialed1. Make sure the phone is OFF (not in talk mode).�. Press the redial button, then use the 5 or 6 buttons to select the desired number.�. Press the STORE soft key to store the number.

NOTE: If using handset; WHICH MEMORY? shows in the display. Use the 5 or 6 button to select HANDSET or BASE, and press the SELECT soft key to confirm record location.

4. Use the touch-tone to enter the name (up to 11 characters).5. Press the DONE soft key to save the record.

NOTE: If the redial number has more than 24 digits, the redial number cannot be stored in memory.

�7

Inserting a Pause in the Dialing SequencePress the #PAUSE button on the touch-tone pad twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.) A pause shows on the display as a P. Each pause counts as 1 digit in the dialing sequence. If you need a longer pause, press the #PAUSE button twice again.

Reviewing a Stored Number1. Make sure the phone is OFF (not in talk mode).�. Press the MEMORY soft key to enter the main menu.�. Use the 5 or 6 button to scroll to desired record. -OR- Press the �-9 key to search for the desired record alphabetically. For example, if the

record names starts with the letter "N", pressing the 6 key will automatically skip to the records starting with the letter "M". The 6 button can then be pressed multiple times until the records starting with the letter "N" are displayed. You can then use the 5 or 6 button to scroll to desired record.

4. Press the VIEW soft key to review the detail information of the record. NOTE: The handset can access the base memory as well as the handset memory. To access the base memory from the handset, press the memory soft key and then press the BASE soft key.

Changing a Stored Number1. Make sure the phone is OFF (not in talk mode).�. Press the MEMORY soft key to enter the phone book.�. Use the 5 or 6 button to scroll to desired record.4. Press the OPTIONS soft key to access the option menu.5. Use the 5 or 6 button to scroll to EDIT.6. Press the SELECT soft key to confirm.7. Repeat Steps 6 through 10 in Storing CID Records in Internal Memory.

��

Deleting Records Stored in Memory1. Make sure the phone is OFF (not in talk mode).�. Press the MEMORY soft key to enter the phone book.�. Use the 5 or 6 button to scroll to desired record.4. Press the OPTIONS soft key to access the option menu.5. Use the 5 or 6 button to scroll to DELETE.6. Press the SELECT button to confirm the deletion. MEMORY DELETED shows in the

display.

Dialing a Number from Memory1. Make sure the phone is ON (in talk mode) by pressing the TALK/LINE1/flash1 or TALK/

LINE�/flash� or handsfree button.NOTE: While in talk mode, the handset’s can only access the handset memory. Make sure the memory records from the base are transferred to the handset in order to access them.

�. Use the 5 or 6button to select the desired record. -OR- Press the �-9 key to search for the desired record alphabetically. For example, if the

record names starts with the letter "N", pressing the 6 key will automatically skip to the records starting with the letter "M". The 6 button can then be pressed multiple times until the records starting with the letter "N" are displayed. You can then use the 5 or 6 button to scroll to desired record.NOTE: For Chain Dialing feature, repeats steps 2 and 3 until all sequences are entered.

�. Press the DIAL soft key to confirm. The number dials automatically. -OR-1. Make sure the phone is OFF (not in talk mode).�. Press the MEMORY soft key to enter the phone book.�. Use the 5 or 6button to select the desired number. -OR- Press the �-9 key to search for the desired record alphabetically. 4. Press the TALK/LINE1/flash1 or TALK/LINE�/flash� or the handsfree button. The

number dials automatically.

�9

Chain Dialing from MemoryUse the Dialing a Number from Memory feature to make calls that require a sequence of numbers, such as a frequently used long distance card number. This can be storing the various segments as a phone book record and then memory dialing in the correct sequence.

TIP: Wait for the access tones before pressing the memory button or your call might not go through.

Transferring MemoryNOTE: Transferring memory between the base and the handset can ONLY be done with the cordless handsets. The cordless handsets can save a memory record into the handset memory storage or the base. The cordless handset can also transfer a memory record from the handset to the base or from the base to the handset.

Transferring memory from the handset to the base:1. Press the MEMORY soft key to enter the phone book.�. Use the 5 or 6 button to select the desired memory record to be transferred.�. Press the OPTION soft key.4. Use the 5 or 6 button to select COPY TO BASE.5. Press the SELECT soft key.6. You will hear a confirmation tone and the display shows MEMORY COPY TO BASE.Transferring memory from the base to a handset:Memory records transferred from the base to a handset will only transfer to the handset initiating the transfer. Each handset must transfer the memory record into the handset memory individually.1. Press the MEMORY soft key.�. Press the BASE soft key to access the base memory.�. Use the 5 or 6 button to select the desired memory record to be transferred.4. Press the OPTION soft key.5. Use the 5 or 6 button to select COPY TO HS.6. Press the SELECT soft key.7. You will hear a confirmation tone and the display shows MEMORY COPY TO HS.

40

Answering System Operation This section discusses the buttons and features on the answering system.

Handset Messages IndicatorThe handset MESSAGES indicator shows you have new messages. It blinks if there are new messages. The ans on/off button must be ON in order for the MESSAGES indicator to work.

Screening Calls from the Base1. Wait for the caller to begin leaving a message (to determine who is calling).�. To speak to the caller, pick up the handset, and press the TALK/LINE1/flash1 or TALK/

LINE�/flash� or handsfree button on the base or handset.The answering system automatically stops recording when you activate the handset or base or pick up an extension phone.

TIP: Make sure the volume on the base is set loud enough to hear your incoming calls.

Message PlaybackBase UnitThe messages indicator on the base lets you know when you have messages. To play messages in Line 1 mailbox or in Line � mailbox, press the corresponding PLAY/STOP 1 or � button.While a message is playing, you may do the following:

• Press the corresponding PLAY/STOP 1 or � button to stop the message playback.• Press and release the 7 (review) button to restart the current message.• Press and release the 7 (review) button twice to go to the previous message.• Press and release the 8 (skip) button to go to the next message.• Press the delete button to erase the current message.

41

HandsetThe display on the handset shows # MSG when you have messages. 1. Make sure the phone is OFF (not in talk mode).�. Press the MENU soft key to access main menu.�. Use the 5 or 6button to scroll to MESSAGES.4. Press the SELECT soft key to confirm.5. Use the 5 or 6 button to scroll to desired MAILBOX 1 OR 2.6. Press the SELECT soft key to access the option menu. ANSWERER REMOTE ACCESS

shows in display and unit announces the following;• Press � to play messages.• Press � to stop.• Press 0 while playing a message to erase.• Press 1 to review.• Press � to skip.• Press 4 to turn OFF/ON.• Press 5 to record a new message.• Press 7 to review menu again.

Memory FullWhen the answering system memory is full, the system answers after 10 rings. You should erase some messages so the answering system may record new messages.

NOTE: The maximum recording time of an incoming message is about 3 minutes per each and the total allowable recording time is about 20 minutes for 2 mailboxes to share. The total allowable number of recorded message is 50 for each mailbox. The answering system will be full when either one of the above conditions is reached.

Erasing MessagesYou may erase messages three ways: one message at a time from the base; all messages from the base or one message at a time from the handset or a phone in another location.

NOTE: Erased messages cannot be restored. To erase one message at a time from the base:1. Press the PLAY/STOP button. The message plays.�. Press and release the delete button. ERASED shows in the display.

4�

To erase all messages from the base:1. Press the PLAY/STOP. The message plays. �. Press and hold the delete button. ERASE ALL MESSAGES? shows in the display. �. Press the YES soft key to confirm the deletion. ALL MESSAGES ERASED shows in the

display. To erase a message from the handset:1. Press the MENU soft key on the handset. �. Use the 5 or 6 buttons to scroll to MESSAGES. �. Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display,

where XX is the number of the new messages in the mail box. 4. Use the 5 or 6 buttons to select the desired mailbox. 5. Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display. 6. Press the PLAY/STOP on the handset (the � button). The message plays. 7. Press the ERASE (the 0 button) to erase the message during message playback.

Leaving a MemoBase Unit 1. Press and hold the memo/msg fwd button on the base. You must hold the button until

you finish recording the memo.�. Begin speaking after you hear the beep.�. Release the memo/msg fwd button when finished.

NOTE: Message will default record in Mailbox 1.

Cordless Handset1. Press MENU soft key on the handset.�. Use the 5 or 6 buttons to scroll to MESSAGES.�. Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display,

where XX is the number of the new messages in the mail box.4. Use the 5 or 6 buttons to select the desired mailbox which you want to leave the

message.5. Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display.6. Press the MEMO on the handset (the 5 button) to start. 7. Begin speaking when RECORDING MEMO shows in the display.�. Press the END soft key when finished.

NOTE: Make sure the END soft key is pressed after finished recording memo or it will not be recorded in the mailbox.

4�

Remote AccessYou can access your answering system from any touch-tone phone by entering your �-digit security code during the playing of outgoing announcement or after you hear the outgoing announcement.1. Dial the telephone number to which the answering system is connected.�. Enter the security code during the outgoing announcement or after you hear the tone.�. Follow the voice menu to use the answering system’s remote functions.

Belt Clip and Optional HeadsetConnecting the Belt Clip1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of the

handset. �. Snap the ends of the belt clip into place.

Connecting an Optional Headset to the HandsetEach handset can be used with an optional headset hands free operation.

1. Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected.

�. Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.

�. Press the TALK/LINE1/flash1 or TALK/LINE�/flash� button to answer a call or make calls using the headset.

4. To return to normal operation, unplug the headset from the jack.

44

Changing the BatteryCAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd) battery model 5-2548, which is compatible with this unit.

1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery.�. Remove the battery compartment door.�. Disconnect the cord attached to the battery pack and remove the battery pack from

the handset.4. Insert the new battery pack and connect the cord to the jack inside the battery

compartment.5. Put the battery compartment door back on.6. Place handset in the base or handset charge cradle to charge. Allow the handset

battery to properly charge (for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.

Battery Safety Precautions• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic

materials could be released which can cause injury.• To reduce the risk of fire or personal injury, use only the Nickel-Cadmium (Ni-Cd)

battery listed in the User’s Guide.• Keep batteries out of the reach of children.• Remove batteries if storing over �0 days.

NOTE: This product contains a nickel-cadmium rechargeable battery and must be recycled or disposed of properly. We suggest that you check with your local Environmental Agency regarding recycling or disposal.

Ni-Cd

Must be Recycled or Disposed of Properly

ContainsNickel-Cadmium

Rechargeable Battery

45

Display MessagesThe following indicators show the status of a message or of the unit.BLOCKED CALL/ The person is calling from a name or number that has been BLOCKED NAME/ blocked from transmission.BLOCKED NUMBERBUSY Indicates the system is busy and not able to connect to the

system.

CALL WAITING Indicates a call is waiting on the line.

DELETE ALL? Prompt asking if you want to erase all Caller ID records.

DELETE CALL ID? Prompt asking if you want to erase the current Caller ID record that is shown on the display.

DELETED Prompt confirming the Caller ID record is erased.

ENTER NAME Prompt telling you to enter the name in one of the 10 memory locations.

ENTER TEL NUMBR Prompt telling you to enter a telephone number in one of the 10 memory locations.

INCOMPLETE DATA Caller information has been interrupted during transmission or the phone line is excessively noisy.

LOW BATTERY Indicates the battery pack needs charged.

NEW Indicates call or calls have not been reviewed.

NO CALLS Indicates no calls have been received.

NO DATA No Caller ID information was received.

PAGING The page button on the base has been pressed.

PRESS TALK KEY Indicates the CID number is a Direct Dial Number (DDN) and cannot be formatted.

REPT Repeat call message. Indicates that a new call from the same number was received more than once.

UNKNOWN CALL The incoming call is from an area not serviced by Caller ID or theNAME/NUMBER information was not sent.

46

Handset Sound SignalsSignal MeaningA long warbling tone (with ringer on) Signals an incoming callThree short beeps Page signalOne short beep (every 7 seconds) Low battery warning

Troubleshooting GuideCaller ID SolutionsNo display

• Fully charge (for 16 hours) or replace the battery.• If you are using AC (electrical) power, make sure that the unit is connected to a non-

switched electrical outlet. Unplug the AC power converter from the unit and plug it back in.

Caller ID Error Message• The unit displays this message if it detects anything other than valid Caller ID

information during the silent period after the first ring. This message indicates the presence of noise on the line.

No Caller ID• In order to receive Caller ID information, you must subscribe to the standard name/

number Caller ID service from your local telephone company.

Telephone SolutionsNo dial tone

• Check and repeat installation steps: Ensure the base power cord is connected to a working outlet . Ensure the telephone line cord is connected to the base and the wall jack.• Disconnect the base from the wall phone jack and connect another phone to the

same jack. If there is no dial tone on the second phone, the problem might be your wiring or local service.

• The cordless handset may be out of range of the base. Move closer to the base.• Ensure the battery is properly charged (16 hours).• Ensure the battery pack is installed correctly. • Did the handset beep when you pressed the TALK/LINE1/flash1 or TALK/LINE�/flash�

or handsfree button? The battery may need to be charged.

47

Dial tone is OK, but can’t dial out • Make sure the TONE/PULSE setting on the base is set to the type of phone service

you are subscribed to.Handset/Base does not ring

• Make sure the handset ringer switch is turned on and the base ringer is programmed to HI.

• The cordless handset may be out of range. Move closer to the base.• You may have too many extension phones on your line. Try unplugging some phones.• Check for dial tone. If no dial tone is heard, see solutions for "No dial tone."

You experience static, noise, or fading in and out• The cordless handset may be out of range of the base. Move closer to the base.• Make sure base is not plugged into an outlet with another household appliance.• Charge the battery.

Unit beeps• Charge battery for 16 hours.• See solutions for “No dial tone”.• Replace the battery.

Memory Dialing doesn’t work• Did you program the memory location keys correctly?• Did you follow proper dialing sequence?

Phone dials in pulse with tone service• Make sure phone is in tone dialing mode.

Phone won't dial out with pulse service• Make sure phone is in pulse dialing mode.

Battery SolutionsIf you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:

• Short talk time• Poor sound quality• Limited range

4�

General Product CareTo keep your unit working and looking good, follow these guidelines:

• Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).

• DO NOT expose to direct sunlight or moisture.• Avoid dropping the handset, as well as other rough treatment to the phone.• Clean the phone with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this will damage the

finish.• Retain the original packaging in case you need to ship the phone at a later date.

Causes of Poor Reception• Aluminum siding.• Foil backing on insulation.• Heating ducts and other metal construction that can shield radio signals.• You’re too close to appliances such as microwaves, stoves, computers, etc.• Atmospheric conditions, such as strong storms.• Base is installed in the basement or lower floor of the house.• Base is plugged into AC outlet with other electronic devices.• Baby monitor is using the same frequency.• Handset battery is low.• You’re out of range of the base.

49

Accessory InformationDESCRIPTION MODEL NO. BLACKAC power adaptor 5-2605Belt Clip 5-2706Headset 5-2425Replacement Handset Battery 5-2548

To order, call the nearest distributor for your area;Ontario: (905) 624-8516 Manitoba: (204) 783-2088British Columbia: (604) 438-8001 Quebec: (514) 352-9071A shipping and handling fee will be charged upon ordering.It is required by law to collect appropriate sales tax for each individual state, country, and locality to which the merchandise is being sent. Items are subject to availability.

50

ServiceATLINKS Communications Canada, Inc., warrants to the purchaser or gift recipient that if any manufacturing defect becomes apparent in this product within 1 year from the original date of purchase, it will be replaced free of charge, including return transportation.This warranty does not include damage to the product resulting from accidents, misuse or leaking batteries.Should your product not perform properly during the warranty period, either:.1. Return it to the selling dealer with proof of purchase for replacement, OR�. Remove the batteries (where applicable), and pack product complete with accessories in the original

carton (or equivalent). — Mail prepaid (with proof of purchase) and insured to::

ATLINKS Communications Canada, Inc. c/o Thomson multimedia Ltd. 6200 Edwards Boulevard Mississauga, Ontario Canada L5T 2V7

The provisions of this written warranty are in addition to and not a modification of or subtraction from the statutory warranties and other rights and remedies contained in any applicable legislation, and to the extent that any such provisions purport to disclaim, exclude or limit any such statutory warranties and other rights and remedies, such provisions shall be deemed to be amended to the extent necessary to comply therewith.If you are unable to find a qualified servicer for out of warranty service, you may write to:

ATLINKS Communications Canada, Inc. c/o Thomson Inc. P.O. Box 0944 Indianapolis, Indiana, U.S.A., 46�06-0944

Attach your sales receipt to this booklet for future reference. This information is required if service is needed during the warranty period.Purchase date ________________________________________________________ Name of store ________________________________________________________

51

IndexAAccessory Information 49Advanced Intercom Features �0Answerer Setup 17Answering a Call �5Answering System Operation 40

B Base - Set Local Area Codes 15Base Date/Time 1�Base Key Tone 16Base Layout 9Base Name 1�Base Ring To Answer 1�Base Ringer Tone 16Base Ringer Volume 15Base Ringers 15Base Speakerphone �6Base Speakerphone Set Up 1�Base Unit 40, 4�Base VIP Melody Tone 16Base Voice/Display Prompt Language 1�Basic Operation �5Battery Safety Precautions 44Battery Solutions 47Before You Begin 6Belt Clip and Optional Headset 4�

C Call Transfer ��Call Waiting Caller ID ��Caller ID (CID) ��Caller ID Solutions 46Causes of Poor Reception 4�Changing a Stored Number �7Changing the Battery 44Changing the

Outgoing Announcement 1�Charge/In Use Indicator �5Connecting an Optional

Headset to Handset 4�Connecting the Base Station 11Connecting the Belt Clip 4�Cordless Handset �6, 4�

D Date Format 14, �4Deleting CID Records �5Deleting Records Stored in Memory ��Dialing a Caller ID Number ��Dialing a Number from Memory ��Digital Security System 7Display Messages 45

E Erasing Messages 41

5�

F FCC RF Radiation Exposure Statement �Flash �6Forwarding Messages 19Forwarding Messages ON/OFF 19

G General Product Care 4�Global De-registration �7

H Handset 41Handset - Setting Local Area Codes �4Handset Date/Time ��Handset Display Prompt Language �1Handset Key Tone ��Handset Layout �Handset Messages Indicator 40Handset Name ��Handset Registration ��Handset Ringer Tone ��Handset Ringer Volume �1Handset Ringers �1Handset Sound Signals 46Handset Telephone Set Up �0Handset VIP Melody ��Hearing Aid Compatibility (HAC) �Hold �7

I Important Information �Important Installation Guidelines 7Index 51Inserting a Pause in the Dialing

Sequence �7Installation 7Installing the Backup Batteries

on Base Unit 11Installing the Base Station 11Installing the Handset Battery 10Installing the Phone 10Intercom Operation �9Interference Information �Introduction 6

L Leaving a Memo 4�Licensing �

M Making a Call �5Making an Intercom Call �9Memory �6Memory Full 41Message Playback 40Mute �6

N Number of Retries �0Number Redial �6

Index

5�

O Outgoing Announcement 17

P Parts Checklist 6

R Receiving an Incoming Call

During an Intercom Call �0Receiving an Intercom Call �9Receiving CID Records ��Recording Quality �0Recording the

Outgoing Announcement 17Remote Access 4�REN Number �Reviewing a Stored Number �7Reviewing Call Records ��Reviewing the

Outgoing Announcement 17Room Monitor �7

S Screening Calls from the Base 40Service 50Set Date 14, �4Set Forwarding Messages 19Set Time 14, �4Set Year 14, �4Setting the Security Code 1�

IndexSpeakerphone Volume 1�Storing a Name and Number

in Memory �6Storing CID Records (In CID Memory) ��Storing CID Records in

Internal Memory �4Storing the Last Number Dialed �6

T Telephone Jack Requirements 6Telephone Network Information �Telephone Solutions 46Time Format 14, �4Tone/Pulse 14Transferring Memory �9Troubleshooting Guide 46Turning the Answerer(s) On or Off 1�

U Using Intercom with

External Telephone Calls �0Using the Soft Keys 1�Using the Soft Keys �0

V View Unit ID �0Volume �6

W Wall Mounting the Base 11

Model �5�65000095�5 (Rev. 0 CAN E/F)06-10Printed in China

ATLINKS Communications Canada, Inc.© �006 ATLINKS Communications Canada, Inc.

Trademark(s) ® RegisteredMarque(s) déposée(s)

Modèle 25865Système de téléphone à deux lignes 5,8 GHz avec haut-parleur, répondeur et combiné sans fil Guide de l’utilisateur

Renseignements ImportantsAVIS: Ce produit est conforme aux spécifications techniques applicables d’Industrie Canada.Avant d’installer cet appareil, l’utilisateur doit vérifier s’il est permis de le raccorder aux installations de la compagnie locale de télécommunications. L’installation doit de plus respecter les méthodes de raccordement approuvées. L’abonné doit savoir que le respect des conditions mentionnées ci-dessus n’empêche pas nécessairement la détérioration du service dans certaines situations.La réparation des appareils certifiés doit être confiée à un service de maintenance canadien dûment autorisé, désigné par le fournisseur. Toute réparation ou modification effectuée par l’utilisateur peut amener la compagnie à exiger le débranchement de l’installation.Par mesure de sécurité, les utilisateurs doivent s’assurer du raccordement réciproque des circuits de mise à la terre du service public d’énergie, des lignes téléphoniques et — s’il y a lieu — des systèmes intérieurs de conduites d’eau métalliques. Cette précaution peut s’imposer particulièrement dans les régions rurales.ATTENTION: Les utilisateurs ne doivent pas essayer de faire eux-mêmes ces raccordements. Ils doivent communiquer avec le service d’inspection compétent ou faire appel à un électricien, selon le cas.NOTES: Cet appareil ne peut être utilisé pour le service payant (monnaie) fourni par la compagnie de téléphone.

Renseignements Sur L’interférenceCet appareil produit et utilise l’énergie radiofréquence qui peut gêner la réception radio et télévision résidentielle s’il n’est pas installé ou utilisé conformément aux instructions contenues dans ce guide. Une protection raisonnable est assurée contre une telle interférence, mais rien ne garantit qu’un appareil donné ne produira pas d’interférence. Si on soupçonne et confirme une interférence d’une ou plus des façons suivantes: réorienter l’antenne du récepteur radio ou télévision, éloigner l’appareil du récepteur ou brancher l’appareil et le récepteur dans des prises de circuits différents. L’utilisateur peut aussi demander conseil à un technicien en radio-télévisìon compétent. Cet appareil a été mis à l’essai et répond à toutes les limites des appareils informatiques de Classe B, conformément à l’alinéa 15, des Règlements de la FCC. Cet appareil est conforme à la régle RSS-�10 d’Industrie Canada. Le terme “IC :” avant que le nombre par radio de certification signifie seulement que des caractéristiques techniques du Canada d’industrie ont été rencontrées. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne peut causer de l’interférence, et (�) Cet appareil doit accepter toute interférence, y compris l’interférence pouvant entraîner le fonctionnement non souhaitable de l’appareil.

Information sur le Réseau TéléphoniqueSi cet appareil provoque des dérangements sur la ligne et, par conséquent, sur le réseau téléphonique, la compagnie de téléphone signalera, s’il y a lieu, qu’elle doit temporairement interrompre le service. Si elle est dans l’impossibilité de le faire et que les circonstances dictent une telle mesure, la compagnie de téléphone peut immédiatement interrompre le service pendant un certain temps.La compagnie de téléphone peut apporter des changements à ses installations de télécommunications, à son équipement, à son exploitation ou à ses politiques si la poursuite des affaires nécessite de tels changements. Si l’on croit que ces changements influeront sur l’utilisation ou le rendement du téléphone, la compagnie doit donner un préavis suffisant pour permettre de maintenir le service.Il faut aviser la compagnie de téléphone si l’on désire déconnecter son téléphone de façon permanente.

Facteur D’équivalence de Sonnerie (REN)L’étiquette sous cet appareil indique notamment le facteur d’équivalence de sonnerie de l’appareil. Le REN permet de déterminer le nombre d’appareils que vous pouvez raccorder à votre ligne téléphonique et qui sonneront quand votre numéro de téléphone est composé. Dans la plupart des régions (mais pas toutes), la somme des REN de tous les appareils raccordés à une ligne ne doit pas dépasser 5. Pour connaître le nombre d’appareils que vous pouvez raccorder à votre ligne, compte tenu du REN, communiquez avec votre compagnie de téléphone.

REN (facteur d’équivalence de sonnerie) SE TROUVE À LA BASE DE L’APPAREIL.

LicensingSous license du brevet US 6,4�7,009.

Compatibilité avec les Prothèses AuditivesCe téléphone est conforme aux normes FCC/Industrie Canada en matière de compatibilité avec les prothèses auditives.

Énonce sur L’exposition au Rayonnement RF de la FCCCet équipement est conforme aux limites d’exposition au rayonnement RF de la FCC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé en maintenant une distance minimale de �0 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas être placé ou utilisé avec une autre antenne ou un autre émetteur.Pour l’utilisation sur soi, ce téléphone a été mis à l’essai et est conforme aux lignes directrices en matière d’exposition RF de la FCC lorsque utilisé avec la pince-ceinture fournie avec ce produit. L’utilisation d’autres accessoires peut ne pas être conforme avec les lignes directrices de la FCC en matière d’exposition RF.

4

Table des matièresRenseignements impoRtants ............................................ 2Renseignements suR L’inteRféRence .............................. 2infoRmation suR Le Réseau téLéphonique ..................... 3facteuR D’équivaLence De sonneRie (Ren) .................. 3Licensing ............................................................................ 3compatibiLité avec Les pRothèses auDitives.................. 3énonce suR L’exposition au Rayonnement Rf

De La fcc .............................................................. 3tabLe Des matièRes ............................................................ 4tabLe Des matièRes ............................................................ 5intRoDuction ..................................................................... 6avant De commenceR ....................................................... 6

Liste De pièces ............................................................. 6exigences De La pRise téLéphonique ........................ 6

instaLLation ....................................................................... 7système De sécuRité numéRique ............................... 7impoRtantes Lignes DiRectRices suR L’instaLLation 7

pRésentation Du combiné ................................................ 8pRésentation De La base .................................................. 9instaLLation Du téLéphone ............................................10

instaLLation De La piLe Du combiné .........................10instaLLation De La station De base ........................11

instaLLation Des piLes De secouRs De La base 11poste De base .......................................................11

montage au muR ......................................................11base - pRogRammation Du haut-paRLeuR ..................12

voLume Du haut-paRLeuR ................................12utiLisation Des touches pRogRammabLes ........12activeR ou DésactiveR Le RéponDeuR ...............12

base - Langue Des messages vocaux et De L’affichage ................................................................13base - nom ................................................................13base - RégLage De Date/heuRe ..............................13

RégLage Du temps .........................................14composition Du temps ..................................14composeR La Date .........................................14fixeR La Date ..................................................14RégLage De L’année .......................................14

tonaLite/impuLsions .................................................14base - RégLage De inDicatif LocaL .........................15base - sonneRies ......................................................15

base - voLume De sonneRie ...............................15

base - timbRe De sonneRie ................................16base - tonaLité La méLoDie vip .......................16base - tonaLité De touche ................................16

pRogRammation Du ReponDeuR ...............................17message D’accueiL ..............................................17

Révision Du message D’accueiL ..................17enRegistRement Du message D’accueiL ......17RempLacement Du message D’accueiL ........18

base - sonneRies avant Réponse ......................18coDe De sécuRité.................................................18tRansfeRt Des messages ....................................19

pRogRammez un nombRe pouR tRansféReR .19tRansfeRt Des messages maRche/aRRet ................................19affic iD poste ...............................................20nombRe D’essais ............................................20

quaLité De L’enRegistRement .............................20pRogRammation Du combiné .........................................20

utiLisation Des touches pRogRammabLes ........20combiné - Langue Des messages vocaux et De L’affichage ................................................................21combiné - sonneRies ................................................21

combiné - voLume De sonneRie ........................21combiné - timbRe De sonneRie ..........................21combiné - tonaLité La méLoDie vip .................22combiné - tonaLité De touche .........................22

enRegistRement .........................................................22nom Du combiné .......................................................23combiné - RégLage De Date/heuRe .......................23

RégLage Du temps .........................................23composition Du temps ..................................24composeR La Date .........................................24fixeR La Date ..................................................24RégLage De L’année .......................................24

combiné - RégLage De inDicatif LocaL ..................24pRincipes Du téLéphone .................................................25

inDicateuR De chaRgement/utiLisation .................25RéponDRe à un appeL ...............................................25faiRe un appeL ...........................................................25fLash...........................................................................25Recomposition ...........................................................26commanDe De voLume ..............................................26

5

haut-paRLeuR suR La base .........................26combiné ..........................................................26

souRDine ....................................................................26gaRDe ..........................................................................27DesenRegistRement gLobaL .....................................27L’écoute à Distance ..................................................27Renvoi D’appeL ..........................................................28fonctionnement De L’inteRphone ...........................29

faiRe un appeL D’inteRphone ..........................29Reception D’un appeL D’inteRphone ......................29fonctions avancees De L’inteRphone ....................30

RecevoiR un appeL penDant un appeL D’inteRphone .................................30utiLisation De L’inteRphone avec Les appeLs exteRieuRs ...................................30appeL a Deux ........................................................30appeL a tRois .......................................................30

Renvoi D’appeLs exteRieuRs a D’autRes combines 31afficheuR (ciD) ..............................................................32

afficheuR D’appeL en attente ................................32Reception De DossieRs D’appeLants .......................32memoRisation De DossieRs D’appeLants (Dans La memoiRe De L’afficheuR) ..........................................33consuLtation Des DossieRs D’appeLants ...............33composition D’un numéRo D’appeLant .................33memoRisation Des DossieRs D’appeLants Dans La memoiRe inteRne ...................................34suppRession De Les DossieRs D’appeLants.............35

mémoiRe ...........................................................................36mémoRisation D’un nom et D’un numéRo.............36enRegistRement Du DeRnieR numéRo composé ....36inseRtion D’une pause Dans La sequence De composition (D’un numeRo memoRise) ......37consuLtation Des numeRos memoRises .................37

RempLacement De numeRo memoRise.....................37suppRession De DossieRs memoRises .....................38composition D’un numeRo memoRise ...................38composition en chaine a paRtiR De La memoiRe ..39

tRansfeRt Du RépeRtoiRe ...............................................39utiLisation Du ReponDeuR .............................................40

inDicateuR De messages De combiné ....................40fiLtRage Des appeLs a paRtiR De La base ...............40ecoute Des messages ...............................................40memoiRe pLeine .........................................................41effaceR Les messages...............................................41LaisseR une note ......................................................42

suR Le base .....................................................42suR Le combine ..............................................42

acces à Distance ............................................................43pince-ceintuRe et casque en option ..........................43

fixation De La pince-ceintuRe .................................43RaccoRDement D’un casque facuLtatif au combine ..43

RempLacement De La piLe ...............................................44pRécautions à pRenDRe ..................................................44messages affichés .........................................................45signaux sonoRes Du combiné ......................................46conseiLs De Dépannage .................................................46

soLutions - afficheuR ........................................46soLutions - téLéphone .......................................46batteRy soLutions ...............................................47

soins et entRetien ..........................................................48causes De mauvaise Réception .....................................48infoRmation pouR accessoiRes .....................................49seRviceapRès-vente .......................................................50

Table des matières

VOIR LES INSCRIPTIONS SOUS L'APPAREIL OU À L'ARRIÉRE DU BOÎTiER.

RISQUE DE CHOC ÉLECTRIQUENE PAS ENLEVERAVERTISSEMENT:

AFIN D'ÉVITER LESDANGERSD'INCENDIE ETD'ÉLECTROCUTION,NE PAS EXPOSERCET APPAREIL À LAPLUIE NI ÀL'HUMIDITÉ.

LE SYMBOLE DEL'ÉCLAIR ILLUSTRÉDANS UN TRIANGLEEST UN AVERTISSE-MENT INDIQUANTUNE "TENSIONDANGEREUSE" ÀL'INTÉRIEUR DEL'APPAREIL.

ATTENTION:AFIN DE RÉDUIRELES RISQUESD'ÉLECTROCUTION, NE PASENLEVER LE COUVERCLE (NI LECÔTÉ ARRIÈRE). AUCUNEPIÈCE INTÉRIEURE NE PEUTÊTRE RÉPARÉE PARL'UTILISATEUR. POUR TOUTERÉPARATION, CONSULTER DESTECHINICIENS COMPÉTENTS.

LE POINT D’EXCLAMATIONILLUSTRÉ DANS UNTRIANGLE EST UNAVERTISSEMENTINDIQUANT QUEL’APPAREIL EST FOURNIAVEC DES INSTRUCTIONSIMPORTANTES.

ATTENTION:

6

IntroductionATTENTION : Vous devez respecter certaines règles de sécurité lorsque vous utilisez un appareil téléphonique. Reportez-vous aux INSTRUCTIONS IMPORTANTES DE SÉCURITÉ qui accompagnent ce produit et conservez-les pour référence ultérieure.

IMPORTANT : Étant donné que les téléphones sans cordon fonctionnent à l’électricité, vous devriez disposer d’au moins un téléphone avec cordon dans la maison, en cas de panne de courant.

Avant de CommencerListe de PiècesAssurez-vous que la boîte contient les articles suivants:

Base Combiné

Pince-ceinture

Adaptateur CA

2 Cordons téléphonique

Bloc-pile de combiné

Porte du logement à pile

Exigences de la Prise TéléphoniquePour utiliser ce téléphone, vous aurez besoin de deux prises téléphoniques modulaires (une pour la première ligne et l’autre pour la deuxième) qui peuvent ressembler à celles représentées ci-contre, déjà installées à votre domicile, OU une prise modulaire RJ14. Si vous avez besoin d’une prise modulaire, contactez compagnie de téléphone pour savoir comment en faire installer une.

Piédestal de bâti de mur

Prise de ligne téléphonique

modulaire

Plaque murale

7

InstallationSystème de Sécurité NumériqueLorsque vous déposez le combiné sur la base, l’appareil vérifie son code de sécurité, qui empêche les fausses sonneries d’autres téléphones sans cordon.

REMARQUE SUR L’INSTALLATION: Certains téléphones sans fil fonctionnent à des fréquences qui peuvent causer ou subir de l’interférence de téléviseurs, fours à micro-ondes et magnétoscopes situés à proximité. Pour réduire ou éviter cette interférence, la base de votre téléphone sans fil ne devrait pas être placée près ou sur un téléviseur, un four à micro-ondes ou un magnétoscope. Si l’interférence persiste, déplacez le téléphone sans fil à une plus grande distance de ces appareils. D’autres appareils de communications peuvent aussi utiliser la fréquence de 5,8 GHz pour communiquer et si ces appareils ne sont pas installés correctement, ils peuvent interagir entre eux et avec votre nouveau téléphone. Si vous êtes aux prises avec de l’interférence, consultez les guides d’utilisation de ces appareils sur la manière de paramétrer les canaux afin d’éliminer l’interférence. Les appareils courants susceptibles d’utiliser la fréquence de 5,8 GHz comprennent les émetteurs sans fil audio/vidéo, les réseaux informatiques sans fil, les systèmes téléphoniques sans fil avec postes multiples et certains systèmes téléphoniques sans fil à grande portée.

Importantes Lignes Directrices sur L’installation• Évitez les sources de bruit et de chaleur, comme les moteurs, les lampes fluorescentes, les

fours à micro-ondes, les appareils de chauffage et le soleil direct.• Évitez les endroits extrêmement poussiéreux, humides et froids.• Évitez les autres téléphones sans cordon et les ordinateurs personnels.• Ne jamais installer les câbles téléphoniques pendant un orage électrique.• Ne jamais installer de prises téléphoniques dans des endroits humides, à moins qu’elles

soient spécialement conçue pour endroits humides.• Ne jamais toucher les fils ou bornes téléphoniques non isolés, à moins que la ligne

téléphonique ait été débranchée de l’interface réseau.• Installer ou modifier les lignes téléphoniques avec soin.

Présentation du Combiné

intercom (bouton interphone)

handsfree (bouton mains libres)

END/CANCEL (bouton fin/annuler)

ERASE(bouton effacer)

redial (bouton recomposition)

*TONE (bouton tonalité)

7 (bouton révision)

TALK/LINE 2/flash 2 (bouton parler/ ligne 2/flash 2)

Afficheur

ID 5 ou 6/touche programmable la

sélection pour l’écran(ID appelant -/+

bouton)

touche programmable pour l’écran de

droite

PLAY/STOP(bouton écoute/arrêt)

8 (bouton évitement)

#PAUSE(bouton)

TALK/LINE 1/flash 1 (bouton parler/ ligne 1/flash 1)

touche programmable pour l’écran de

gauche

9

msg fwrd/memo (bouton transfert

des messages/mémo)

page(bouton recherche)

5 ou 6 vol (+/- boutons volume

d’haut-parleur)

delete(bouton effacer)

Présentation de la Base

charge/in use (indicateur de chargement/

marche)

CID 5 ou 6/touche programmable la

sélection pour l’écran(ID appelant -/+

bouton)

Afficheurtouche

programmable pour l’écran de

droite

touche programmable pour l’écran de

gauche

intercom (bouton interphone)

END/CANCEL (bouton fin/annuler)

redial (bouton

recomposition)

PLAY/STOP 1 et 2

(boutons et indicateur de écoute/arrêt)

8 (bouton évitement)

#PAUSE(bouton)

handsfree (bouton mains libres)

*TONE (bouton tonalité)

7 (bouton révision)

TALK/LINE 2/flash 2

(bouton parler/ ligne 2/flash 2)

TALK/LINE 1/flash 1 (bouton parler/ ligne 1/flash 1)

10

Installation du TéléphoneInstallation de la pile du combiné

REMARQUE : Vous devez installer une pile dans chaque combiné avant de les utiliser.

ATTENTION : Pour réduire le risque d’incendie ou de blessures, utilisez seulement la batterie approuvé par Thomson Inc. de nickel-cadmium (Ni-Cd) du model 5-2548, qui est compatible avec cette unité.

1. Repérez la pile et le couvercle du compartiment de la pile qui sont emballés ensemble dans un sac de plastique séparément du combiné.

�. Repérez le compartiment de la pile à l’arrière du combiné.�. Raccordez le connecteur de la pile dans la prise située à l’intérieur du compartiment.

REMARQUE : Pour assurer une installation correcte de la pile, le connecteur est claveté et ne peut être inséré que dans une seule position.

4. Insérez le bloc-piles.

5. Refermez le compartiment de la pile en poussant le couvercle vers le haut jusqu’à ce qu’il s’enclenche.

6. Placez les combinés sur les socles de chargement.

Laissez les combinés se charger pendant 16 heures avant l’utilisation initiale. Si vous ne chargez pas correctement les combinés, le rendement de la pile sera compromis.

fil noir

fil rouge

Bloc-pilede combiné

APPUYEZFERMEMENT

11

Installation de la Station de BaseInstallation des Piles de Secours de la BasePour parer aux panes de courant, vous pouvez installer quatre piles alcalines AA (non fournies) dans la base qui serviront d’alimentation de secours. 1. Retirez le couvercle du compartiment des piles (situé sous l’appareil).�. Suivez les instructions d’installation des piles de l’écran et insérez quatre piles alcalines AA

dans le compartiment.�. Replacez le couvercle du compartiment des piles.

Poste de base1. Choisissez un endroit près d’une prise de courant et d’une prise téléphonique murale (soit

deux prises de type RJ11 ou une prise de type RJ14) et placez le téléphone sans fil sur une surface plane, comme un bureau ou une table, ou fixez-le au mur

�. Branchez une extrémité du cordon téléphonique dans la prise TEL LINE sur le dos de la base et l’autre extrémité dans une prise murale modulaire.

�. Branchez une terminaison du fil de téléphone dans la prise TEL LINE 1 à l’arrière de la base et l’autre terminaison dans la prise modulaire qui correspond à la première ligne. Branchez l’autre fil de téléphone dans la prise TEL LINE � à l’arrière de la base et dans la prise modulaire qui correspond à la deuxième ligne.REMARQUE : Si vous n’avez qu’une prise pour les deux lignes, utilisez la prise TEL LINE 1/L1 + L2 à l’arrière de la base.

4. Placez le combiné sur le socle de la base. L’indicateur charge/in use s’allume pour confirmer que la pile se charge. HANDSET 1 apparaît sur l’écran du combiné après environ deux minutes.

5. Laissez le téléphone se charger pendant 16 heures avant l’utilisation initiale. Si vous ne chargez pas correctement le téléphone, le rendement de la pile sera compromis.

ATTENTION : Utilisez seulement l’alimentation 5-2605 qui accompagne l’appareil. L’utilisation d’autres alimentations peut endommager l’apparei.

Montage au Mur1. Retournez la base.�. Fixez le socle de montage au mur en insérant d’abord les languettes de la partie ouverte du

support dans les fentes de la partie inférieure de la base. Appuyez vers le bas et enclenchez le socle en plac.

�. Glissez les trous de montage (à l’arrière de la base) sur les tiges de la plaque murale et abaissez l’appareil en place (plaque murale non incluse.)

1�

Base - Programmation du Haut-ParleurREMARQUE : Les arrangements changeants de menu sur la base changeront seulement les arrangements sur la base et les arrangements changeants de menu sur le combiné changeront seulement des arrangements sur le combiné. Par exemple, si vous changez la langue sur le combiné, il ne changera pas la langue sur la base.

Volume Du Haut-ParleurUtilisez les touches (5 ou 6) pour régler le volume du haut-parleur de la base au niveau désiré pendant une conversation OU appuyez sur les touches TALK/LINE1/flash1, TALK/LINE�/flash� ou mains libres sur la base, puis réglez le volume. VOL -1 est le niveau minimal et VOL-9 est le niveau maximal.

Utilisation des Touches ProgrammablesSur la base, il y a trois touches situées sous l’affichage; elles peuvent être programmées pour remplir diverses fonctions. Utilisez ces touches pour activer les icônes des touches programmables qui apparaissent sur l’affichage. Vous pouvez programmer les fonctions suivantes sur les touches programmables : Sonneries, Nom du Base, Date/Heure, Langue, Tonalité/Impulsions, Indicatif Local et Programmation du Repondeur.

REMARQUE : Pendant la programmation, vous pouvez appuyer sur le bouton END/CANCEL à tout moment pour sortir.

Activer ou Désactiver le RépondeurREMARQUE : Le répondeur doit être ACTIVÉ pour entendre les messages vocaux.

1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner ANSWERER SETUP.4. Appuyez sur la touche programmable SELECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner MAILBOX 1 ou MAILBOX 2 pour modifier les

paramètres des répondeurs 1 ou �. 6. Appuyez sur la touche programmable SELECT pour confirmer.7. Utilisez les touches 5 ou 6 pour rouleau au ANSWER ON/OFF.�. Appuyez sur la touche programmable SELECT pour ouvrir le menu. ANSWERER ON OFF

apparaît sur l’affichage.9. Utilisez les touches 5 ou 6 pour sélectionner ON ou OFF.10. Appuyez sur la touche programmable DONE pour confirmer. L’indicateur/bouton PLAY/

STOP correspondante est illuminé.REMARQUE : L’affichage de la base indique ANSWER OFF et l’indicateur/bouton PLAY/STOP est éteint lorsque le Mailbox Answerer est à OFF (désactivé).

1�

Base - Langue des Messages Vocaux et de L’affichage La langue utilisée pour les messages vocaux est la même que celle de l’affichage. Si la langue utilisée pour les annonces vocales est l’espagnol, l’affichage sera en espagnol. Si la langue utilisée pour les annonces vocales est le français, l’affichage sera en français. Le réglage par défaut est English.1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner SET LANGUAGE.4. Appuyez sur la touche programmable SELECT pour confirmer.5. Utilisez les touches 5 ou 6, ou sur la touche programmable CHANGE pour sélectionner

ENGLISH, FRANÇAIS ou ESPAÑOL.6. Appuyez sur la touche programmable DONE pour enregistrer votre sélection.

Base - Nom1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner NOM BAS.4. Appuyez sur la touche programmable SÉLECT pour écrire le menu.5. Utilisez le clavier numérique de la base pour entrer un nom (maximum de 1� caractères).

Chaque touche numérotée comprend plus d’une lettre. Par exemple, pour entrer le nom Bill Smith, appuyez deux fois sur la touche � pour la lettre B. Appuyez � fois sur la touche 4 pour la lettre l. Faites le 5 trois fois pour la lettre L. Appuyez trois fois sur la touche 5 pour le second L, et appuyez sur la touche 1 pour insérer un espace entre la prénom et le nom. Appuyez 4 fois sur la touche 7 pour la lettre S ; appuyez une fois sur la touche 6 pour la lettre M ; appuyez � fois sur la touche 4 pour la lettre I ; appuyez sur la touche � pour la lettre T ; appuyez deux fois sur la touche 4 pour la lettre H.REMARQUE : Si vous faites une erreur, appuyez sur la touche programmable SUPPRIM pour revenir en arrière et effacer le(s) caractère(s) ou nombre(s) incorrect(s).

6. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Base - Réglage de Date/HeureVous pouvez programmer les fonctions suivantes dans le menu PROG. DATE/H; Réglage du Temps, Composition du Temps, Composer la Date, Fixer la Date et Réglage de l’Année. Pour accéder au menu PROG. DATE/H:1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROG. DATE/H.4. Appuyez sur la touche programmable SÉLECT pour confirmer.

14

Réglage du TempsDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner HORLOGT.�. Utilisez le clavier pour entrer l’heure.�. Appuyez sur la touche programmable AM / PM pour sélectionner AM ou PM.

REMARQUE : La sélection AM/PM n’est pas disponible en format Horlage 24 Heure.

4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Composition du TempsDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner FORMAT HEURE.�. Appuyez sur la touche programmable MODIF. pour sélectionner HORLOGE 12 H ou

HORLAGE 24 H.�. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Composer la DateDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner FORMAT DATE.�. Appuyez sur la touche programmable MODIF. pour sélectionner MM/JJ ou JJ/MM.�. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Fixer la DateDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner DATE (JJ/DD).�. Utilisez le clavier pour entrer l’date.�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Réglage de l’AnnéeDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner ANNEE (YYYY).�. Utilisez le clavier pour entrer l’année.�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Tonalite/ImpulsionsVous pouvez programmer LIGNE 1 et LIGNE � indépendamment. 1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionne TON./IMP.

15

4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner LIGNE 1 ou LIGNE 2. 6. Appuyez sur la touche programmable SÉLECT pour confirmer.7. Utilisez les touches 5 ou 6 pour sélectionner TONALITÉ ou IMPULSION.�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Base - Réglage de Indicatif LocalVous pouvez programmer l’affichage des renseignements d’identification des appelants pour cinq indicatifs régionaux différents dans votre région. Par exemple, si vous sélectionnez un affichage à sept chiffres, le numéro sera affiché selon le format xxx-xxxx, etc.1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner INDICATIF .4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Appuyez sur la touche programmable FORMAT pour changer la longueur de dossiers

d'appelants.6. Utilisez le clavier pour entrer l’indicatif à trois chiffres.7. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Base - SonneriesVous pouvez programmer les éléments suivants pour LIGNE 1 et LIGNE � indépendamment dans le menu PROG. SONNERIE; Volume de Sonnerie, Timbre de Sonnerie, Tonalité de VIP et Tonalité de Touche. Pour accéder au menu PROG. SONNERIE :1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROG. SONNERIE.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner LIGNE 1 or LIGNE 2. 6. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Base - Volume de SonnerieDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner VOLUME SONNERIE. �. Appuyez sur la touche programmable MODIF. pour sélectionner HAUT, MOYEN, BAS

ou ÉTEINT. �. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Si vous DÉSACTIVEZ la sonnerie, la sonnerie désactivez de l’icône apparaît dans l’afficheur.

16

Base - Timbre de SonnerieDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner TIMBRE SONN..�. Appuyez sur la touche programmable MODIF. pour sélectionner.�. Utilisez les touches 5 ou 6 pour aire défiler à l’arrangement désiré. Vous entendrez un

échantillon de la sonnerie vous modifier la tonalité choisi. 4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Les tonalités de sonnerie de 1 à 10 sont des tonalités de sonnerie doubles et les mélodies de 1 à 10 sont des mélodies.

Base - Tonalité la Mélodie VIPCette caractéristique permet d’assigner une mélodie spécifique à une personne qui retient votre attention lorsque ce numéro appelle. Lorsqu’une mélodie VIP est assignée et que cette personne appelle, l’appareil sonne normalement le temps d’une sonnerie et enchaîne avec la mélodie VIP. Vous avez le choix entre dix mélodies différentes et vous pouvez mémoriser 10 dossiers VIP.

REMARQUE: Cette caractéristique ne fonctionne que si les conditions suivantes sont satisfaites:1. Vous êtes abonné au service d’identification des appels.2. Vous avez précédemment mémorisé le dossier d’identification de

l’appelant. Le message AUC MEM UTILIS s’affichera pour rappeler à l’utilisateur de transférer d’abord le dossier d’identification de l’appelant.

Du Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner MELODIE VIP.�. Appuyez sur la touche programmable MODIF. pour sélectionner.�. Utilisez les touches 5 ou 6 pour aire défiler à l’arrangement désiré. Vous entendrez un

échantillon de la sonnerie vous modifier la tonalité choisi. 4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Les tonalités de sonnerie de 1 à 10 sont des tonalités de sonnerie doubles et les mélodies de 1 à 10 sont des mélodies.

Base - Tonalité de ToucheDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner TONALIT TOUCHE.�. Appuyez sur la touche programmable MODIF. pour sélectionner ACTIVÉ, ÉTEINT ou LIEN

SONNERIE.REMARQUE : L’option LIEN SONNERIE active ou désactive les tonalités des touches lorsque la sonnerie est activée ou mise en sourdine.

�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

17

Programmation du RepondeurVous pouvez programmer les éléments suivants pour MESSAGERIE 1 et MESSAGERIE � indépendamment dans le menu PROG. REPOND ; Répondeur MARCHE/ARRET, Message d'Accueil, Sonneries avant Réponse, Code de Sécurité, Transfert des Messages, et Qualité de l’Enregistrement. Pour accéder au menu PROG. REPOND :1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROG. REPOND.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner MESSAGERIE 1 or MESSAGERIE 2.

Message d’AccueilVous pouvez programmer les fonctions suivantes dans le menu Message d'Accueil; Révision du Message d'Accueil, Enregistrement du Message d’Accueil et Remplacement du Message d’Accueil.

Révision du Message d’AccueilDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne MESS. ACCUEIL.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner LECT.4. Appuyez sur la touche programmable SÉLECT pour commencer à jouer l’annonce.

LECTURE MESSAGE ACCUEIL apparaît sur l’affichage.5. Appuyez sur la touche programmable SORTIR quand vous avez fini de passer en revue

l’annonce.

Enregistrement du Message d’AccueilPour obtenir de meilleurs résultats lorsque vous enregistrez, placez-vous à environ neuf pouces du microphone et essayez le plus possible d’éliminer le bruit de fond.Du Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne MESS. ACCUEIL.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner ENREG.4. Appuyez sur la touche programmable SÉLECT. ENREGISTREMENT MESSAGE ACCUEIL

apparaît sur l’affichage.5. Appuyez sur la touche programmable OUI pour enregistrer votre message.

REMARQUE : Si vous ne désirez pas enregistrer de message, appuyez sur la touche programmable NON.

1�

6. Appuyez sur la touche programmable FIN lorsque vous aurez terminé l’enregistrement; le message sera joué.REMARQUE : Pour faire jouer le message à nouveau, appuyez sur la touche programmable RELECT..

Exemple de message d’accueilBonjour. Vous avez rejoint (votre nom). Je ne peux répondre présentement, alors laissez-moi vos nom et numéro , de même qu’un court message après la tonalité et je vous rappellerai. Merci.

Remplacement du Message d’AccueilDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne MESS. ACCUEIL.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner MODIFIER.4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu MODIFIER DEFAUT

ENREGISTRE apparaît sur l’affichage.5. Utilisez les touches 5 ou 6 pour sélectionne DEFAUT ou ENREGISTRE.6. Appuyez sur la touche programmable SÉLECT pour confirmer.7. Appuyez sur la touche programmable SORTIR quand vous avez fini votre choix.

Base - Sonneries avant RéponseDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne SONN REPONDRE.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionne 3 SONNERIES, 4 SONNERIES, 5 SONNERIES,

6 SONNERIES ou ECONOM D'INTER.4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Si vous choisissez Économiseur d’interurbain (TS), L’appareil répond après 3 coups de sonnerie s’il y a de NOUVEAUX messages, ou des messages non écoutés, OU l’appareil répond après la 5e sonnerie s’il n’y a PAS de nouveaux messages ou de messages non écoutés.

Code de SécuritéDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne CODE SECURITE.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. CODE SECURITE 123

apparaît sur l’affichage. �. Utilisez le clavier numérique pour entrer votre nouveau code de sécurité à � chiffres. Par

exemple, appuyez sur les touche 6, � et � pour entrer le code de sécurité 6��. Le code de sécurité par défaut est 123.

4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

19

Transfert des MessagesCette fonction permet de faire suivre les messages reçus sur le répondeur à un autre numéro de téléphone, ce qui vous permet de recevoir vos messages peu de temps après qu’ils aient été reçus et vous évite d’avoir à appeler régulièrement pour vérifier votre répondeur. Vous pouvez programmer les fonctions suivantes dans le menu MESSAGE AVANT ; Programmez un Nombre pour Transférer, Transfert des Messages MARCHE/ARRET, Affic ID Poste et Nombre d'Essais.

Programmez un Nombre pour TransférerDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionner MESSAGE AVANT.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner PROG NUM TRANS.4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. 5. Utilisez le clavier numérique pour entrer le nombre désiré. (incluez l’indicatif régional si le

nombre de fond.)REMARQUE : Si vous faites une erreur, appuyez sur la touche programmable SUPRIM pour revenir en arrière et effacer le(s) nombre(s) incorrect(s).

6. Appuyez sur la touche programmable TERMINÉ pour confirmer. NUMERO AVANT MEMORISE apparaît sur l’affichage.

Transfert des Messages MARCHE/ARRETDu Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionner MESSAGE AVANT.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner TRANS MAR/ARR. 4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. MESSAGE AVANT

MARCHE ARRET apparaît sur l’affichage. 5. Utilisez les touches 5 ou 6 pour sélectionner MARCHE ou ARRET. 6. Appuyez sur la touche programmable TERMINÉ pour confirmer.7. Pour activer le réglage, appuyez sur le bouton memo/msg fwrd sur la base. FW ANS

apparaît sur l’affichage. REMARQUE : En plus de devoir activer la fonction de suivi des messages dans le menu, vous devez appuyez sur la touche msg fwd sur la base pour activer la fonction Transfert de Messages. Aussi, la fonction Transfert de Messages doit être activée sur les deux lignes séparément; par exemple, si cette fonction est désactivée sur la première ligne mais activée sur la deuxième, la fonction Transfert de Messages ne sera activée que sur la deuxième ligne. REPON MAR/MAR apparaît sur l’affichage si cette fonction est activée sur les deux lignes; REPON MAR/ARR apparaît sur l’affichage si la fonction est activée sur la première ligne seulement.

�0

Affic ID PosteLe numéro de code de l’identification de l’unité est pour la référence seulement.

Nombre d’EssaisSi la ligne du numéro sélectionné est occupée, le répondeur tentera à nouveau de faire suivre les messages plus tard (jusqu’à trois fois, selon le réglage).Du Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionner MESSAGE AVANT.�. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionner NO D’ESSAIS. 4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. 5. Utilisez les touches 5 ou 6 pour sélectionne 0, 1, 2 ou 3. 6. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Qualité de l’EnregistrementChangez la qualité de l’enregistrement de High à Medium augmentera le temps d’enregistrement disponible sur le répondeur, alors que changer la qualité de l’enregistrement de Medium à High améliorera la clarté du message, mais réduira le temps d’enregistrement disponible sur le répondeur.Du Menu de PROG. REPOND : 1. Utilisez les touches 5 ou 6 pour sélectionne QUALITÉ ENR.. �. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu. �. Utilisez les touches 5 ou 6 pour sélectionne MOYEN ou ÉLEVÉ. 4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Programmation du CombinéREMARQUE : Les arrangements changeants de menu sur le combiné changeront seulement les arrangements sur le combiné et les arrangements changeants de menu sur la base changeront seulement des arrangements sur la base. Par exemple, si vous changez la langue sur le combiné, il ne changera pas la langue sur la base.

Utilisation des Touches ProgrammablesSur le combiné, il y a trois touches situées sous l’affichage; elles peuvent être programmées pour remplir diverses fonctions. Utilisez ces touches pour activer les icônes des touches programmables qui apparaissent sur l’affichage. Vous pouvez programmer les fonctions suivantes sur les touches programmables : Sonneries, Enregistrement, Nom du Combiné, Date/Heure, Langue et Indicatif Local.

REMARQUE : Pendant la programmation, vous pouvez appuyer sur le bouton END/CANCEL à tout moment pour sortir.

�1

Combiné - Langue des Messages Vocaux et de L’affichage Le réglage par défaut est English.1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROGR LANGUE.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6, ou sur la touche programmable MODIF pour sélectionner

ENGLISH, FRANÇAIS ou ESPAÑOL.6. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Combiné - SonneriesVous pouvez programmer les éléments suivants pour LIGNE 1 et LIGNE � indépendamment dans le menu PROG. SONNERIE ; Volume de Sonnerie, Timbre de Sonnerie, Tonalité de VIP et Tonalité de Touche. Pour accéder au menu PROG. SONNERIE :1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROG. SONNERIE.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner LIGNE 1 or LIGNE 2. 6. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Combiné - Volume de SonnerieDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner VOLUME SONNERIE. �. Appuyez sur la touche programmable MODIF. pour sélectionner HAUT, MOYEN, BAS

ou ÉTEINT. �. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Si vous DÉSACTIVEZ la sonnerie, la sonnerie désactivez de l’icône apparaît dans l’afficheur.

Combiné - Timbre de SonnerieDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner TIMBRE SONN..�. Appuyez sur la touche programmable MODIF. pour sélectionner.�. Utilisez les touches 5 ou 6 pour aire défiler à l’arrangement désiré. Vous entendrez un

échantillon de la sonnerie vous modifier la tonalité choisi. 4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Les tonalités de sonnerie de 1 à 10 sont des tonalités de sonnerie doubles et les mélodies de 1 à 10 sont des mélodies.

��

Combiné - Tonalité la Mélodie VIPCette caractéristique permet d’assigner une mélodie spécifique à une personne qui retient votre attention lorsque ce numéro appelle. Lorsqu’une mélodie VIP est assignée et que cette personne appelle, l’appareil sonne normalement le temps d’une sonnerie et enchaîne avec la mélodie VIP. Vous avez le choix entre dix mélodies différentes et vous pouvez mémoriser 10 dossiers VIP.

REMARQUE: Cette caractéristique ne fonctionne que si les conditions suivantes sont satisfaites:1. Vous êtes abonné au service d’identification des appels.2. Vous avez précédemment mémorisé le dossier d’identification de

l’appelant. Le message AUC MEM UTILIS s’affichera pour rappeler à l’utilisateur de transférer d’abord le dossier d’identification de l’appelant.

Du Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner MELODIE VIP.�. Appuyez sur la touche programmable MODIF. pour sélectionner.�. Utilisez les touches 5 ou 6 pour aire défiler à l’arrangement désiré. Vous entendrez un

échantillon de la sonnerie vous modifier la tonalité choisi. 4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

REMARQUE : Les tonalités de sonnerie de 1 à 10 sont des tonalités de sonnerie doubles et les mélodies de 1 à 10 sont des mélodies.

Combiné - Tonalité de ToucheDu Menu de PROG. SONNERIE :1. Utilisez les touches 5 ou 6 pour sélectionner TONALIT TOUCHE.�. Appuyez sur la touche programmable MODIF. pour sélectionner ACTIVÉ, ÉTEINT ou LIEN

SONNERIE.REMARQUE : L’option LIEN SONNERIE active ou désactive les tonalités des touches lorsque la sonnerie est activée ou mise en sourdine.

�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Enregistrement1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner ENREGISTREMENT.4. Appuyez sur la touche programmable SÉLECT pour confirmer. APP. ET MAINT. BOUTON

PAGE JUSQU' AU TIMBRE apparaît sur l’affichage.5. Maintenez le bouton de recherche de la base enfoncé jusqu’à ce que vous entendiez une

longue tonalité au combiné. Le message HANDSET X ENREGISTRÉ s’affiche: X correspond su numéro du combiné. Vous entendrez une tonalité de confirmation.

Si affichages de combiné ENREGISTRER SVP, appuyez sur la touche programmable OK sur le combiné et répétez l’étape 5 ci-dessus.

��

Nom du Combiné1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner NOM COMBINE.4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu.5. Utilisez le clavier numérique de la base pour entrer un nom (maximum de 1� caractères).

Chaque touche numérotée comprend plus d’une lettre. Par exemple, pour entrer le nom Bill Smith, appuyez deux fois sur la touche � pour la lettre B. Appuyez � fois sur la touche 4 pour la lettre l. Faites le 5 trois fois pour la lettre L. Appuyez trois fois sur la touche 5 pour le second L, et appuyez sur la touche 1 pour insérer un espace entre la prénom et le nom. Appuyez 4 fois sur la touche 7 pour la lettre S ; appuyez une fois sur la touche 6 pour la lettre M ; appuyez � fois sur la touche 4 pour la lettre I ; appuyez sur la touche � pour la lettre T ; appuyez deux fois sur la touche 4 pour la lettre H.REMARQUE : Si vous faites une erreur, appuyez sur la touche programmable SUPPRIM pour revenir en arrière et effacer le(s) caractère(s) ou nombre(s) incorrect(s).

6. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Combiné - Réglage de Date/HeureVous pouvez programmer les fonctions suivantes dans le menu PROG. DATE/H; Réglage du Temps, Composition du Temps, Composer la Date, Fixer la Date et Réglage de l’Année. Pour accéder au menu PROG. DATE/H:1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner PROG. DATE/H.4. Appuyez sur la touche programmable SÉLECT pour confirmer.

Réglage du TempsDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner HORLOGT.�. Utilisez le clavier pour entrer l’heure.�. Appuyez sur la touche programmable AM / PM pour sélectionner AM ou PM.

REMARQUE : La sélection AM/PM n’est pas disponible en format Horlage 24 Heure.

4. Appuyez sur la touche programmable TERMINÉ pour confirmer.

�4

Composition du TempsDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner FORMAT HEURE.�. Appuyez sur la touche programmable MODIF. pour sélectionner HORLOGE 12 H ou

HORLAGE 24 H.�. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Composer la DateDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner FORMAT DATE.�. Appuyez sur la touche programmable MODIF. pour sélectionner MM/JJ ou JJ/MM.�. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

Fixer la DateDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner DATE (JJ/DD).�. Utilisez le clavier pour entrer l’date.�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Réglage de l’AnnéeDu Menu de PROG. DATE/H :1. Utilisez les touches 5 ou 6 pour sélectionner ANNEE (YYYY).�. Utilisez le clavier pour entrer l’année.�. Appuyez sur la touche programmable TERMINÉ pour confirmer.

Combiné - Réglage de Indicatif LocalVous pouvez programmer l’affichage des renseignements d’identification des appelants pour cinq indicatifs régionaux différents dans votre région. Par exemple, si vous sélectionnez un affichage à sept chiffres, le numéro sera affiché selon le format xxx-xxxx, etc.1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner INDICATIF .4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Appuyez sur la touche programmable FORMAT pour changer la longueur de dossiers

d'appelants.6. Utilisez le clavier pour entrer l’indicatif à trois chiffres.

7. Appuyez sur la touche programmable TERMINÉ pour enregistrer votre sélection.

�5

Principes du TéléphoneIndicateur de Chargement/UtilisationLe téléphone est ACTIVÉ quand l’indicateur LED sur le combiné est allumé et que l’indicateur charge/in use de la base est allumé. Les indicateurs du combiné et de la base clignotent quand vous recevez un appel.

Répondre à un Appel1. Pour répondre à un appel, appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou

le bouton handsfree avant vous commencez à parler.�. Lorsque vous avez terminé, appuyez sur le bouton END/CANCEL sur la base ou le combiné,

ou placez le combiné sur le poste de base.

Faire un Appel1. Appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou le bouton handsfree et

composez le nombre désiré. -OU- Écrivez le nombre d’abord, puis appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/

flash� ou le bouton handsfree et le nombre compose automatiquement.REMARQUE : Appuyez sur la touche handsfree sur le combiné pendant la conversation pour passer du haut-parleur à l’écouteur du combiné. Par contre, si vous appuyez sur la touche handsfree sur la base pendant une conversation à travers le haut-parleur de la base, la communication sera coupée.

�. Lorsque vous avez terminé, appuyez sur le bouton END/CANCEL sur la base ou le combiné, ou placez le combiné sur le poste de base.REMARQUE : Lorsque le combiné est en mode mains libres, replacer le combiné sur la base vous fera passer en mode mains libres de la base. Si vous désirez raccrocher en mode mains libres du combiné, vous devez raccrocher en appuyant sur la touche END/CANCEL du combiné.REMARQUE : Vous pouvez entrer jusqu’à 32 chiffres de précomposition.REMARQUE : En cas d’erreur lors de la composition du numéro, utilisez la touche programmable DELETE pour reculer et effacer le chiffre erroné, puis entrez le bon chiffre.

FlashUtilisez le bouton TALK/LINE1/flash1, TALK/LINE�/flash� sur la base ou le combiné pour activer les services d’appel personnalisés, comme l’appel en attente, offerts par la compagnie de téléphone.

�6

RecompositionVous pouvez recomposer un numéro comptant jusqu’à �� caractères. Pour recomposer rapidement le dernier numéro composé :1. Appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou le bouton handsfree.�. Appuyez sur le bouton redial. -OU-Pour choisir des cinq derniers numéros que vous avez composés par le menu :1. Appuyez d’abord sur le bouton, et utilisez le bouton 5 ou 6 pour sélectionner le numéro à

recomposer.• Appuyez sur le bouton 5 pour rappeler l’appel le plus ancien et faire défiler les numéros

jusqu’au plus récent (numéro plus élevé).• Appuyez sur le bouton 6 pour rappeler l’appel le plus récent et faire défiler les numéros

jusqu’au plus ancien (numéro moins élevé).�. Appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou le bouton handsfree, ou la

touche programmable COMPOSE.. Le numéro sera composé automatiquement.

Commande de VolumeHaut-Parleur sur la Base Utilisez les boutons vol (5 ou 6) pour ajuster le volume de haut-parleur sur la base sur un niveau confortable pendant un appel OU appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou le bouton handsfree sur la base et ajustez alors le volume. VOL-1 est l’intensité minimale, VOL-9 l’intensité maximale.

CombinéUtilisez les boutons vol (5 ou 6) du côté du combiné pour ajuster le volume de l’écouteur du combiné pendant un appel. Il y a quatre arrangements. Serrez la flèche droite pour augmenter le volume et la flèche gauche pour diminuer le volume. Vous verrez le volume placer sur l’affichage de combiné. VOL 1 est l’intensité minimale, VOL 4 l’intensité maximale.

SourdineUtilisez la fonction silencieux pour converser en privé, hors ligne. La personne en ligne ne peut vous entendre, mais vous pouvez l’entendre.1. Pendant la conversation, appuyez sur la touche programmable SOURD.. Le combiné

affiche SILENC ACTIVE.�. Appuyez sur la touche programmable FIN SOU soft key pour décommander et retourner à

votre conversation téléphonique.

�7

GardeAppuyez sur la touche programmable GARDE pour mettre une prise d’invitation. Le message LX SUR PRISE s’affiche, là où X est la ligne nombre.Pour prendre un appel outre de la prise, appuyez sur la touche programmable FIN GAR.

• Pour commuter une invitation tenez de la base sur le combiné sans fil, appuyez sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� ou le bouton handsfree sur le combiné.

Recherche du CombinéLa fonction de recherche aide à repérer un combiné égaré. Appuyez sur et libérez le bouton page sur la base. Les signaux sonores sans fil de combiné par intermittence et affichages RECHERCHE DE BASE pendant environ deux minutes ou jusqu’à vous appuyez sur la touche programmable OK sur le combiné ou appuyez page sur la base.

REMARQUE : Vous pouvez quand même rechercher les combinés lorsque la sonnerie est désactivée.

Desenregistrement GlobalSi un ou plusieurs des combinés sont perdus, vous devez désenregistrer tous les combinés pour assurer le bon fonctionnement du système. Suivez les étapes ci-dessous pour désenregistrer les deux combinés en même temps.

AVERTISSEMENT: Il n’est pas recommandé de désenregistrer un combiné à moins que cela ne soit absolument nécessaire parce qu’un combiné est désenregistré, que les fonctions du combiné sont inutilisables tant que le combiné n’a pas été réenregistré.

1. Appuyez et gardez enfoncé le bouton page sur le socle jusqu’à ce que l’indicateur charge/in use clignote sur le socle.

�. Appuyez et gardez enfoncé le bouton page sur le socle jusqu’à ce que l’indicateur charge/in use clignote sur le socle.

�. Appuyez une fois sur le bouton page de la base. Tous les combinés sont désenregistrés et BESOINS COMBIN ENREGISTREMENT apparaît dans l’afficheur.

L’écoute à DistanceL’écoute à distance d’une pièce peut se faire par la base ou par le combiné. Commencez par l’appareil avec lequel vous désirez écouter à distance (celui qui servira de microphone).;1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner SURV. PIECE.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. XXX SURVEILLANCE ACTIVÉE apparaît sur l’affichage, là où XXXX est le nom de l’unité.

��

6. Appuyez sur le bouton intercom l’appareil qui servira à l’écoute. La liste des appareils enregistrées apparaît sur l’écran.

7. Utilisez les touches 5 ou 6pour sélectionner l’appareil que vous désirez utiliser pour écouter à distance.

�. Appuyez sur la touche programmable R. PERS pour confirmer. 9. Le premier appareil activera son microphone et la deuxième activera son écouteur pour

vous permettre d’écouter. REMARQUE : Pour que la fonction d’écoute à distance fonctionne, les combinés peuvent reposer sur le socle ou non.REMARQUE : En mode d’écoute à distance, le combiné qui sert à écouter émettra une tonalité d’alerte aux quatre secondes s’il y a un appel entrant. Vous pouvez appuyer sur le bouton TALK/LINE1/flash1 ou TALK/LINE2/flash2 pour quitter le mode d’écoute à distance et prendre l’appel.REMARQUE : Appuyez sur la touche programmable ANNULER ou sur le bouton END/CANCEL pour quitter le mode d’écoute à distance.

Renvoi d’AppelPendant un appel externe, vous pouvez transférer l’appel externe à partir de la base au handset(s) ou vice versa.

REMARQUE : Pour annuler le renvoi d’appel, vous pouvez appuyer sur le bouton END/CANCEL ou le bouton intercom sur la base.

1. Appuyez sur le bouton intercom pour mettre la ligne sur la prise. LX DUR PRISE apparaît sur l’affichage, là où X est la ligne nombre.

�. Utilisez les touches 5 ou 6pour sélectionner le combiné ou base désiré.REMARQUE : S’il n’y a qu’un combiné enregistré dans le système, il sera recherché automatiquement.

�. Appuyez sur le bouton END/CANCEL pour transférer l’appel. Le message TRANSFERT DE: XXXX (où XXXX représente le nom de l’appareil qui transfert l’appel) apparaît sur l’affichage de l’unité qui reçoit.

4. Appuyez sur la touche programmable OK sur le combiné qui reçoit pour prendre l’appel.REMARQUE : S’il n’y a pas de réponse dans les deux minutes du transfert d’appel, les deux unités seront rappelés. Si ni l’une ni l’autre réponse d’unité dans 30 secondes, alors l’appel externe ne sera automatiquement abandonnée.

�9

Fonctionnement de L’interphoneVous pouvez utiliser l’interphone entre la base et le combiné sans cordon sans occuper la ligne téléphonique et, puisque la ligne téléphonique n’est pas utilisée, vous pouvez continuer de recevoir des appels de l’extérieur.

Faire un Appel D’interphone 1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur le bouton intercom.�. Utilisez les touches 5 ou 6 pour sélectionne le combiné ou base désiré.

REMARQUE : S’il n’y a qu’un combiné enregistré dans le système, il sera recherché automatiquement.

4. Appuyez sur la touche programmable R. PERS.5. Le combiné qui reçoit ou la base est recherché; une tonalité est émise et le message

suivant apparaît sur l’écran :

RECH. PERSONNE

COMBINÉ 2 EXIT

RECHERCHE DE

COMBINÉ 1 OK SORTIR

Combiné/Base de Commencement Combiné/Base de Réception

Quand la touche programmable OK ou le bouton intercom sur le combiné ou la base de réception est appuyé sur, le recherche est répondue. Si le recherche in’est pas répondue après deux minutes, AUCUNE RÉPONSE ne montre dans l’affichage du combiné de commencement ou la base et la page est décommandée. L’unité revient au mode ‘attente.

REMARQUE : Si un nom personnalisé est assigné au combiné pendant l’enregistrement, alors ce nom est montré au lieu du nombre de combiné.REMARQUE : Pour annuler le recherche, appuyez sur la touche programmable EXIT ou le bouton intercom sur l’unité de commencement.

Reception d’un Appel D’interphoneVotre combiné ou base émet un signal lorsque vous recevez un appel d’interphone. Appuyez sur la touche programmable OK ou sur le bouton intercom ou sur le bouton TALK/LINE1/flash1, TALK/LINE�/flash� pour répondre à l’appel.

�0

Fonctions Avancees de L’interphoneRecevoir un Appel Pendant un Appel D’interphoneSi vous recevez un appel téléphonique pendant un appel d’interphone, les combinés ou la base émettront la tonalité alerte et resteront en mode d’intercom. L’utilisateur fixé ou bas à la main peut appuyer sur le bouton correspondant TALK/LINEx/flashx button ou le bouton handsfree pour répondre à l’appel.

Utilisation de L’interphone Avec les Appels ExterieursPendant un appel téléphonique, vous pouvez utiliser la fonction interphone pour;

• rechercher un autre combiné et installez une conversation (deux sens) privée d’intercom avec un autre utilisateur tandis que l’appel téléphonique est placé sur la prise

• créez une converser à trois entre le visiteur de téléphone, la base, et les combinés sans fil• renvoyer l’appel extérieur à un autre combiné ou base

Appel a Deux1. Pendant un appel extérieur, appuyez sur le bouton intercom sur le combiné ou la base

et l'appel exterieur est placé sur la prise. La liste de combinés ou de base montre dans l’affichage.

�. Utilisez le bouton 5 ou 6 pour choisir désiré pour fixer ou base.�. Appuyez sur la touche programmable R. PERS.

REMARQUE : Le combiné ou la base de réception appuyer sur le bouton intercom button ou sur la touche programmable OK pour répondre à l’appel par interphone. Les deux personnes à l’interphone peuvent converser en privé. L’appelant extérieur ne peut entendre la conversation par l’interphone.

4. Quand vous avez terminé, appuyez sur la touche programmable EXIT pour interrompre l’appel par interphone, retourner en mode de conversation et poursuivre la conversation téléphonique initiale.

Appel a TroisEntre deux combinés ou un combiné et une base et un appel externe.

1. Pendant un appel extérieur, appuyez sur le bouton intercom sur le combiné ou la base et l’appel externe est placée sur la prise. La liste de combinés ou de base montre dans l’affichage.

�. Utilisez les touches 5 ou 6 pour sélectionner désiré combiné ou base. Vous entendez une tonalité de recherche et RECHERCHE est affiché au combiné d’origine ou base. REMARQUE : le message RECHERCHE DE . . . apparaît sur l’affichage du combiné qui reçoit ou de la base; appuyez sur la touche interphone ou sur la touche programmable OK sur le combiné qui reçoit ou la base pour répondre à l’appel entrant.

�1

�. Lorsque le combiné qui reçoit ou la base répond, appuyez sur la touche programmable UNHOLD sur le combiné de départ ou sur la base pour démarrer la conférence avec le combiné ou la base et l’appel externe. Le message CONFERENCE apparaît sur l’écran du combiné qui appelle et sur l’écran de celui qui reçoit.REMARQUE : Un combiné ou la base peut entrer directement en mode conférence pendant un appel en appuyant sur TALK/LINE1/flash1 ou TALK/LINE2/flash2 sur le deuxième combiné ou de la base.

Entre un combiné ou la base et des appels externes sur la première ou la deuxième ligne.1. Pendant un appel externe sur Line 1 ou Line �, appuyez sur la touche programmable

HOLD pour mettre l’appel en attente.�. Si l’appel est sur la première ligne, appuyez sur la touche TALK/LINE�/flash�. L’icône Line

1 clignote et l’icône Line � apparaît sur l’écran. �. Appuyez sur la touche programmable CONF pour démarrer la conférence avec l’appel

externe.

Renvoi D’appels Exterieurs a D’autres CombinesVous pouvez renvoyer un appel extérieur à un autre combiné ou base pendant qu’il est en cours.

1. Appuyez sur la touche interphone sur le combiné de départ ou sur la base pour mettre en attente l’appel externe, puis recherchez le combiné qui reçoit ou la base.

�. La liste des combinés et la base apparaissent sur l’écran. Utilisez les touches 5 ou 6 pour sélectionner le combiné désiré ou la base.

�. Appuyez sur la touche programmable PAGE pour faire la recherche. Vous entendrez une tonalité de recherche. Le message RECH. PERSONNE sapparaît sur l’affichage du combiné d’origine ou de la base et le message RECHERCHE DE…. apparaît sur l’écran du combiné qui reçoit ou sur celui de la base.

4. Lorsque le combiné qui reçoit répond, appuyez sur la touche END/CANCEL ou handsfree sur le combiné de départ ou sur la base pour transférer l’appel.

— OU —Appuyez sur la touche END/CANCEL ou handsfree sur le combiné de départ ou sur la base

pour transférer l’appel. REMARQUE : S’il n’y a aucune réponse dans 30 secondes, après transfert de l’appel, alors les deux unités reçoivent un avis d’appel retour, et affiche RAPPEL. Si la personne au combiné d’origine ne répond pas dans les 20 secondes, l’appel est automatiquement coupé.

��

Afficheur (CID)IMPORTANT: Pour utiliser les dispositifs d’identification de visiteur de cet appareil, vous devez être abonné au service d’afficheur de nom/numéro standard ou au service d’afficheur d’appel en attente. Pour savoir qui appelle pendant que vous êtes au téléphone, vous devez être abonné au service d’afficheur d’appel en attente.

Cet appareil reçoit et affiche l’information transmise par la compagnie de téléphone. Cette information peut comprendre le numéro de téléphone, la date et l’heure, ou le nom, le numéro de téléphone, la date et l’heure.

Afficheur D’appel en AttenteDans la mesure où vous êtes abonné au service d’afficheur d’appel en attente offert par la compagnie de telephone; si vous recevez un appel d’arrivée et vous emplyez la GE fixez multi le système à la main, un signal sonore indique que la presence d’une attente d’appel invitent la ligne. L’information d’identification de visteur d’attente d’appel sera montrée et stocké dans l’histoire de tous les combines dans le système.• Ai signal d’appel en attente dans le récepteur du combiné, appuyez sur le bouton TALK/

LINE1/flash1 or TALK/LINE�/flash� pour mettre l’appel actuel em garde et répondre à l’appel en attente. Appuyez sur le bouton TALK/LINE1/flash1 or TALK/LINE�/flash� encore pour retourner à l’appel original.

Reception de Dossiers D’appelantsQuand vous recevez un appel, l’information de l’appelant est transmise entre la première et la deuxième sonneries. L’information d’appelant est affichée pendant que le téléphone sonne, vous donnant ainsi la possibilité de consulter l’information et de décider de prendre ou non l’appel.

FORMATOPTIONS

09:37 PM 07/24

317-123-4567PETER C HAN

5 O F 6

L1

L’appel de temps a reçu

CID Endroit De Mémoire

Numéro de téléphone de CID

Nom de CID

Appel de date reçu

��

Memorisation de Dossiers D’appelants (Dans la Memoire de L’afficheur)Si vous êtes absent ou ne pouvez répondre, la mémoire de l’afficheur mémorise les données des 40 plus récents appels reçus pour vous indiquer qui a appelé pendant que vous n’étiez pas disponible. À la réception du 41e appel, le plus ancien dossier d’appelant (1er appel) est automatiquement supprimé.Vous pouvez consulter l’information mémorisée en tout temps. Les appels reçus depuis la dernière consultation sont indiqués comme étant NOUVEAU dans l’afficheur. Les appels qui n’ont pas été écoutés précédemment mais qui proviennent du même numéro plus d’une fois affichent REPT à l’écran.

Consultation des Dossiers D’appelantsÀ mesure que les appels sont reçus et mémorisés, l’afficheur est mis à jour pour vous indiquer le nombre d’appels reçus. Pour faire défiler les dossiers d’appelants.

REMARQUE : Vous pouvez aisément afficher les renseignements d’identification de l’appelant en appuyant sur les touches 5 ou 6 pendant que l’appareil est en mode d’attente.

1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionne JOURNAL ID.4. Appuyez sur la touche programmable SÉLECT pour ouvrir le menu.5. Appuyez sur la touche 6 pour passer en revue les enregistrements du plus récent au plus

ancien. Appuyez sur la touche 5 pour passer en revue les enregistrements du plus ancien au plus récent.

Composition d’un Numéro D’appelant1. Assurez-vous que le téléphone est DÉSACTIVÉ (pas en mode TALK).�. Utilisez le bouton 6 ou 5 pour afficher le dossier désiré.�. Appuyez surTALK/LINE1/flash1 ou TALK/LINE�/flash� ou le bouton handsfree button pour

composer le numéroREMARQUE : Selon (a) le format du numéro de téléphone de l’appelant à sa réception et (b) si vous avez déjà programmé votre indicatif régional dans le menu de programmation, vous devrez peut-être régler le format du numéro de téléphone mémorisé de l’appelant avant de faire l’appel. Pendant que le numéro est affiché, appuyez sur la touche programmable FORMAT pour modifier le numéro et essayez à nouveau.

L’option de format vous laisse changer le format du nombre montré.

�4

Formats disponibles:Nombre de chiffres Explication ExempleOnze chiffres code d’interurbain “1 ” 1-�17-���-���� + indicatif à � chiffres + numéro de téléphone à 7 chiffresDix chiffres indicatif à � chiffres + �17-���-���� numéro de téléphone à 7 chiffres.Sept chiffres numéro de téléphone à 7 chiffres. ���-����

REMARQUE : Si le numéro est corrompu, avec un caractère alphabétique dans un champ numérique, vous entendrez une tonalité d’erreur et le numéro ne sera pas composé. L’appareil affiche COMP. IMPOSS.

Memorisation des Dossiers D’appelants dans la Memoire InterneVous pouvez aussi mémoriser l’information d’appelant dans la mémoire interne du téléphone.

REMARQUE : Il est important de formater correctement les dossiers d’identification de l’appelant AVANT de les mémoriser parce qu’il est impossible de les reformater lorsqu’ils sont déjà en mémoire.

1. Assurez-vous que le téléphone est DÉSACTIVÉ (pas en mode TALK).�. Utilisez les touches 5 ou 6 pour atteindre le dossier d’appelant désiré.�. Appuyez sur la touche programmable OPTION pour accéder au menu d’option.4. Utilisez les touches 5 ou 6 pour sélectionner CONSERVER.5. Appuyez sur la touche programmable SÉLECT pour confirmer.

REMARQUE : Si vous utilisez un combiné, le messag; MEMOIRE? COMBINE BASE apparaît sur l’affichage. Utilisez les touche 5 ou 6 pour sélectionner COMBINÉ ou BASE, puis appuyez sur la touche programmable SÉLECT pour confirmer l’emplacement de mémoire.

6. L’affichage indique ENTRER NOM.7. Utilisez le clavier numérique pour entrer un nom (maximum de 1� caractères).

REMARQUE : Si vous faites une erreur, appuyez sur la touche programmable SUPPRIMER pour revenir en arrière et effacer le caractère ou le nombre incorrect.

�. Utilisez le touche 6 pour rouleau au ENTRER NUMERO.REMARQUE : Le système traite les PAUSES comme des espaces dans la séquence de composition. Chaque pause compte pour un chiffre dans la séquence de composition.

�5

9. Utilisez le clavier numérique pour entrer le numéro de téléphone (maximum de �4 chiffres pauses incluses), et utilisez les touches 6 pour rouleau au MELODIE VIP.

10. Utilisez les touches 5 ou 6 ou la touche programmable MODIF. pour rouleau au le dossier désiré. Vous entendrez un extrait de la tonalité sélectionnée.

11. Appuyez sur la touche programmable TERMINÉ pour enregistrer le dossier désiré.

Suppression de les Dossiers D’appelants1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionne JOURNAL ID.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner le dossier désiré.6. Appuyez sur la touche programmable OPTION pour accéder au menu d’option.7. Utilisez les touches 5 ou 6 pour sélectionner SUPPRIMER et effacement seulement qui

enregistrent. Appuyez sur la touche programmable SÉLECT pour confirmer la suppression et EFFACE

apparaît sur l’affichage. -OU- Utilisez les touches 5 ou 6 pour sélectionner EFFACER TOUT. Appuyez sur la touche programmable SÉLECT, EFFACER TOUT? apparaît sur l’affichage. Appuyez sur la touche programmable OUI pour confirmer la suppression. EFFACE TOUT apparaît sur l’affichage.

�6

MémoireLe combiné sans fil et base chacun ont leurs propres zones de stockage séparées de mémoire Stockez cinquante noms 11-character et numéros du téléphone �4-digit dans le combiné et quarante noms 11-character et numéros du téléphone �4-digit dans les mémoires base.

REMARQUE : Des dossiers de mémoire sont stockés et recherchés dans l’ordre alphabétique. Par exemple, si un dossier de mémoire est stocké avec “Beth” nommé et alors un autre dossier de mémoire est stocké avec “Adam” nommé, le disque avec “Adam” nommé l’être le premier dossier dans le stockage de mémoire. Chaque disque supplémentaire pourrait changer l’ordre des.

Mémorisation d’un Nom et d’un Numéro1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation). �. Appuyez sur la touche programmable SÉLECT pour ouvrir le répertoire. �. Utilisez les touches 5 ou 6 pour rouleau au NOUVEAU.

REMARQUE : Lorsque vous utilisez un combiné, vous pouvez choisir d’enregistrer le numéro dans le répertoire de la base ou dans celui du combiné. Pour choisir le répertoire de la base, appuyez sur la touche programmable BASE.

4. Appuyez sur la touche programmable SÉLECT pour confirmer. ENTRER NOM apparaît sur l’affichage.

5. Répétez les étapes 5 à 11 sous "Memorisation des Dossiers D’appelants dans la Memoire Interne".

6. Pour entrer un autre nom et un autre numéro dans un emplacement-mémoire différent, retournez à l’étape � et répétez l’opération.

Enregistrement du Dernier Numéro Composé1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur le bouton redial, utilisez les touches 5 ou 6 pour sélectionner le dossier

désiré.�. Appuyez sur la touche programmable SAUVEG. pour confirmer.

REMARQUE : Si vous utilisez un combiné, le messag; MEMOIRE? COMBINE BASE apparaît sur l’affichage. Utilisez les touche 5 ou 6 pour sélectionner COMBINÉ ou BASE, puis appuyez sur la touche programmable SÉLECT pour confirmer l’emplacement de mémoire.

4. Utilisez le clavier numérique pour entrer un nom (maximum de 11 caractères).

�7

5. Appuyez sur la touche programmable TERMINÉ pour confirmer.REMARQUE : Si le numéro à recomposer compte plus de 24 chiffres, il ne peut pas être mémorisé.

Insertion D’une Pause dans la Sequence de Composition (D’un Numero Memorise)Appuyez deux fois sur le bouton #PAUSE sur le clavier pour insérer une pause dans la séquence de composition d’un numéro mémorisé si un délai est requis par une tonalité (par exemple, lorsque vous composez 9 pour accéder à la ligne externe et devez attendre une tonalité d’accès de l’ordinateur). Chaque pause est représentée sur l’affichage par un P. Chaque pause compte pour un chiffre dans la séquence de composition. Si vous avez besoin d’une pause plus longue, appuyez deux fois sur le bouton #PAUSE.

Consultation des Numeros Memorises1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MEMOIRE pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour rouleau au le dossier désiré. -OU- Appuyez sur les touches numériques de � à 9 pour faire une recherche par ordre

alphabétique dans les entrées du répertoire. Par exemple, si le nom de l’entrée débute par la lettre « N », appuyez sur la touche 6 pour sauter aux entrées commençant par la lettre « M ». Appuyez ensuite à plusieurs reprises sur la touche 6 pour afficher les entrées commençant par la lettre « N ». Vous pouvez ensuite utiliser les touches 5 ou 6 pour sélectionner l’entrée désirée.

4. Appuyez sur la touche programmable AFFICH pour afficher les renseignements détaillés sur cette entrée. REMARQUE : Le combiné a accès au répertoire de la base ainsi qu’au répertoire du combiné. Pour accéder au répertoire de la base à partir du combiné, appuyez sur la touche programmable memory puis sur BASE.

Remplacement de Numero Memorise1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MEMOIRE pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour rouleau au le dossier désiré.4. Appuyez sur la touche programmable OPTION pour accéder au menu d’option.5. Utilisez les touches 5 ou 6 pour rouleau au MODIFIER.6. Appuyez sur la touche programmable SÉLECT pour confirmer.7. Répétez les étapes 6 à 10 sous "Memorisation des Dossiers D’appelants dans la

Memoire Interne".

��

Suppression de Dossiers Memorises1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MEMOIRE pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour ouleau au le dossier désiré.4. Appuyez sur la touche programmable OPTION pour accéder au menu d’option.5. Utilisez les touches 5 ou 6 pour rouleau au SUPPRIM.6. Appuyez sur la touche programmable SÉLECT pour confirmer. MEMOIRE EFFACE apparaît

sur l’affichage.

Composition D’un Numero Memorise1. Assurez-vous que le téléphone est à ON (en mode conversation) en appuyant sur le bouton

TALK/LINE1/flash1 ou TALK/LINE�/flash� ou le bouton handsfree.REMARQUE : Lorsque vous êtes en mode conversation, vous ne pouvez accéder qu’au répertoire du combiné. Assurez-vous de transférer les entrées du répertoire de la base sur le combiné pour y avoir accès.

�. Utilisez les touches 5 ou 6 pour ouleau au le dossier désiré. -OU- Appuyez sur les touches numériques de � à 9 pour faire une recherche par ordre

alphabétique dans les entrées du répertoire. Par exemple, si le nom de l’entrée débute par la lettre « N », appuyez sur la touche 6 pour sauter aux entrées commençant par la lettre « M ». Appuyez ensuite à plusieurs reprises sur la touche 6 pour afficher les entrées commençant par la lettre « N ». Vous pouvez ensuite utiliser les touches 5 ou 6 pour sélectionner l’entrée désirée.REMARQUE : Pour la fonction de composition en chaîne, reprenez les étapes 2 et 3 jusqu’à ce que toutes les séquences soient enregistrées.

�. Appuyez sur la touche programmable COMPOS. pour confirmer. Le numéro est composé automatiquement.

-OU-1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MEMOIRE pour ouvrir le répertoire.�. Utilisez les touches 5 ou 6 pour ouleau au le dossier désiré. -OU- Appuyez sur la touche � à 9 pour rechercher le dossier désiré alphabétiquement. 4. Appuyez sur le bouton TALK/LINE1/flash1 ou TALK/LINE�/flash� ou le bouton handsfree. Le

numéro est composé automatiquement.

�9

Composition en Chaine a Partir de la MemoireUtilisez le Composition D’un Numero Memorise onction pour faire des appels qui exigent une séquence de numéros, comme lorsque vous utilisez une carte d’appel pour un numéro interurbain souvent appelé.. Vous pouvez enregistrer plusieurs segments dans le répertoirte puis utiliser la mémoire de composition pour les composer en ordre.

CONSEIL : Attendez les tonalités d’accès avant d’appuyer sur le bouton de mémoire suivant, sans quoi votre appel peut ne pas être acheminé.

Transfert du RépertoireREMARQUE : Le transfert du répertoire entre la base et le combiné ne peut s’effectuer qu’avec les combinés sans fil. Les combinés sans fil peuvent enregistrer une entrée dans le répertoire du combiné ou de la base. Les combinés sans fil peuvent aussi transférer une entrée du répertoire du combiné à la base ou l’inverse.

Transfert du répertoire du combiné à la base :1. Appuyez sur la touche programmable MEMOIRE pour ouvrir le répertoire.�. Utilisez les touches 5 ou 6 pour sélectionner l’entrée du répertoire que vous désirez

transférer.�. Appuyez sur la touche programmable OPTION.4. Utilisez les touches 5 ou 6 pour sélectionner COPIER À BASE.5. Appuyez sur la touche programmable SÉLECT soft key.6. Vous entendrez une tonalité de confirmation et le message MEMOIRE COPIER À BASE

apparaît sur l’affichage.

Transfert du répertoire de la base au combiné : Les entrées du répertoire qui sont transférées de la base ne seront transférées qu’au combiné qui initie le transfert. Chaque combiné sans fil doit transférer individuellement les entrées du répertoire dans son répertoire.1. Appuyez sur la touche programmable MEMOIRE.�. Appuyez sur la touche programmable BASE pour accéder à la mémoire base.�. Utilisez les touches 5 ou 6 pour sélectionner l’entrée du répertoire que vous désirez

transférer.4. Appuyez sur la touche programmable OPTION.5. Utilisez les touches 5 ou 6 pour sélectionner COPIER À COMB..6. Appuyez sur la touche programmable SÉLECT.7. Vous entendrez une tonalité de confirmation et le message MEMOIRE COPIER À COMB.

apparaît sur l’affichage.

40

Utilisation du RepondeurCette section traite des boutons et des fonctions du répondeur.

Indicateur De Messages De CombinéL’indicateur de messages de combiné indique le nombre de nouveaux messages reçus, et clignote quand de nouveaux messages ont été reçus. Il faut appuyer sur le bouton ansr on/off pour que l’indicateur de messages puisse fonctionner.

Filtrage des Appels a Partir de la Base1. Attendez que l’appelant commence à laisser un message (pour savoir qui appelle).�. Pour parler à l’appelant, décrochez le combiné et appuyez sur le bouton TALK/LINE1/flash1

ou TALK/LINE�/flash� ou le bouton handsfree sur la base ou le combiné.Le répondeur interrompt automatiquement l’enregistrement quand vous activez le combiné ou base ou décrochez un poste.

CONSEIL : Assurez-vous que le volume de la base est suffisamment élevé pour entendre vos appels.

Ecoute des Messagessur le BaseL’indicateur de messages de la base indique si vous avez des messages. Pour écouter les messages du répondeur de la première ou de la deuxième ligne, appuyez sur la touche correspondante PLAY/STOP 1 ou �.Pendant qu’un message joue, vous pouvez :

• Appuyez sur le bouton correspondant PLAY/STOP 1 ou � pour interrompre le message.• Appuyer et relâcher le bouton 7 (review) pour recommencer le message en cours.• Appuyer et relâcher le bouton 7 (review) à deux reprises pour aller au message

précédent.• Appuyer et relâcher le bouton 8 (skip) pour passer au message suivant.• Appuyer sur le bouton de suppression pour effacer le message en cours.

sur le CombinéLe message # MSG apparaît sur l’écran du combiné lorsque vous avez des messages. 1. Assurez-vous que votre téléphone est DÉSACTIVÉ (pas en mode conversation).�. Appuyez sur la touche programmable MENU pour ouvrir le menu principal.�. Utilisez les touches 5 ou 6 pour sélectionner MESSAGE.4. Appuyez sur la touche programmable SÉLECT pour confirmer.5. Utilisez les touches 5 ou 6 pour sélectionner BOITE V 1 OU 2 désirée.

41

6. Appuyez sur la touche programmable SÉLECT pour accéder au menu d’option. Le message ACCES REPONDEUR apparaît sur l’écran et l’appareil annonce les options suivantes;

Appuyez sur � pour écouter les messages.Appuyez sur � pour arrêter l’écoute.Appuyez sur 0 pendant l’écoute pour effacer le message.Appuyez sur 1 pour écouter de nouveau le message.Appuyez sur � pour ignorer le message.Appuyez sur 4 pour OFF/ON.Appuyez sur 5 pour enregistrer un nouveau message.Appuyez sur 7 pour écouter à nouveau le menu.

Memoire PleineQuand la mémoire du répondeur est pleine, le système répond après 10 sonneries. Effacez quelques messages pour que le répondeur puisse enregistrer les nouveaux messages.

REMARQUE : La durée d’enregistrement maximale de chaque message externe est d’environ trois minutes et la capacité totale d’enregistrement de l’appareil est d’environ 20 minutes pour les deux répondeurs combinés. Le nombre maximal de messages enregistrés est de 50 pour chaque répondeur. Le répondeur est plein lorsque l’une de ces deux conditions est atteinte.

Effacer les MessagesVous pouvez effacer les messages de trois façons : un message à la fois à partir de la base ; tous les messages à partir de la base ; ou un message à la fois à partir du combiné ou d’un téléphone placé ailleurs.

REMARQUE : Des messages effacés ne peuvent pas être reconstitués.Pour effacer un message à la fois à partir de la base:1. Appuyez sur le bouton PLAY/STOP. Le message joue.�. Appuyer et relâcher le bouton delete. EFFACÉ apparaît sur l’affichage.Pour effacer tous les messages écoutés à partir de la base:1. Appuyez sur le bouton PLAY/STOP. Le message joue.�. Maintenez le bouton delete. EFFACER TOUT MESSAGE? apparaît sur l’affichage. �. Appuyez sur la touche programmable OUI pour confirmer la suppression. TOUT MESSAGE

EFFACÉ apparaît sur l’affichage.

4�

Pour effacer un message à partir du combiné:1. Appuyez sur la touche programmable MENU sur le combiné. �. Utilisez les touches 5 ou 6 pour rouleau au MESSAGE. �. Appuyez sur la touche programmable SÉLECT pour confirmer. BOITE V 1 (XX) BOITE V 2 (XX)

apparaît sur l’affichag, là où XX est le nombre de nouveaux messages dans la boîte aux lettres.

4. Utilisez les touches 5 ou 6 pour sélectionne choisissez la boîte aux lettres désirée. 5. Appuyez sur la touche programmable SÉLECT pour confirmer. ACCES REPONDEUR

apparaît sur l’affichage.6. Appuyez sur le bouton PLAY/STOP du combiné (le bouton �). Le message joue. 7. Appuyez sur ERASE (bouton 0) pour effacer le message pendant qu’il joue.

Laisser une Notesur le Base 1. Maintenez le bouton memo/msg fwd de la base enfoncé. Vous devez maintenir le bouton

enfoncé jusqu’à ce que vous ayez terminé d’enregistrer la note.�. Commencez à parler après le bip.�. Relâchez le bouton memo/msg fwd quand vous avez terminé.

REMARQUE : Par défaut, les messages seront enregistrés dans BOITE V 1.sur le Combine1. Appuyez sur la touche programmable MENU sur le combiné. �. Utilisez les touches 5 ou 6 pour rouleau au MESSAGE.�. Appuyez sur la touche programmable SÉLECT pour confirmer. BOITE V 1 (XX) BOITE V 2 (XX)

apparaît sur l’affichag, là où XX est le nombre de nouveaux messages dans la boîte aux lettres.

4. Utilisez les touches 5 ou 6 pour sélectionne choisissez la boîte aux lettres désirée. 5. Appuyez sur la touche programmable SÉLECT pour confirmer. ACCES REPONDEUR

apparaît sur l’affichage.6. Appuyez sur le bouton MEMO sur le combiné (le bouton 5) pour commencer. 7. Commencez à parler quand ENREG DUNE NOTE apparaît sur l’affichage.�. Appuyez sur la touche programmable FIN quand vous avez terminé.

REMARQUE : Assurez-vous d’appuyer sur la touche programmable FIN après avoir enregistré un message; sinon, il ne sera pas enregistré sur le répondeur.

4�

Acces à DistanceVous pouvez accéder au répondeur à partir de tout appareil à tonalité en entrant votre code de sécurité de � chiffres pendant l’écoute du message d’accueil ou à la suite de ce message.1. Composez le numéro sur lequel le répondeur est branché.�. Entrez votre code de sécurité de � chiffres pendant l’écoute du message d’accueil ou après

la tonalité.�. Suivez les indications du menu vocal pour utiliser les fonctions à distance du répondeur.

Pince-ceinture et Casque en OptionFixation de la Pince-ceinture1. Insérez les extrémités de la pince-ceinture dans les fentes de chaque côté

du combiné.�. Enclenchez la pince-ceinture en place.

Raccordement d’un Casque Facultatif au CombineVous pouvez utiliser le combiné avec un casque en option pour converser à mains libres.1. Branchez le casque dans la prise casque sur le côté du combiné. Le récepteur du combiné

et le microphone sont désactivés quand le casque est branché.�. Réglez le casque pour qu’il repose confortablement sur le dessus de la tête et sur oreille.

Placez le microphone à environ deux ou trois pouces de la bouche.�. Appuyez sur le bouton TALK/LINE1/flash1 ou TALK/LINE�/flash� pour répondre ou faire un

appel si vous utilisez le casque.4. Pour retourner au fonctionnement normal, débranchez le casque de la prise.

44

Remplacement de la PileATTENTION : Pour réduire le risque d’incendie ou de blessures, utilisez seulement la batterie approuvé par Thomson Inc. de nickel-cadmium (Ni-Cd) du model 5-2548, qui est compatible avec cette unité.

1. Assurez-vous que le téléphone est DÉSACTIVÉ (pas en mode TALK) avant de remplacer la pile.

�. Retirez la porte du logement à pile.�. Débranchez le cordon fixé au bloc-pile et retirez ce dernier du combiné.4. Insérez le nouveau bloc-pile et branchez le cordon dans la prise à l’intérieur du logement à

pile.5. Remettez la porte du logement à pile en place.6. Placez le combiné sur la base pour charger. Laissez la pile du combiné se charger

correctement (pendant 16 heures) avant l’utilisation initiale ou quand vous installez un bloc-pile neuf. Si vous ne chargez pas correctement le téléphone, le rendement de la pile sera compromis.

Précautions à Prendre• Ne pas brûler, démonter, mutiler ni percer la pile. Comme d’autres piles de ce type, des

produits toxiques peuvent s’échapper et causer des blessures.• Afin de réduire les risques d’incendie ou de blessure, utilisez seulement la pile Nickel-

Cadmium (Ni-Cd) indiquée dans le Guide de l’utilisateur.• Garder les piles hors de la portée des enfants.• Retirez les piles si vous rangez l’appareil pour plus de �0 jours.

45

Messages AffichésLes messages suivants indiquent l’état du téléphone ou vous aident à programmer et à utiliser le téléphone.APPEL BLOQUE/ La transmission de l’information d’appelant ou de nome et du NOM BLOQUE/ numéro de l’appelant est bloquée. NUMBERO BLOQUE

OCCUPE Indique que le système peut occupé et se relier au système.

EFFACER TOUT? Demande si vous souhaitez effacer tous les dossiers d’appelants.

EFF AFFICHEUR? Demande si vous souhaitez effacer le dossier d’appelant actue affiché.

EFFACE Message confirmant l’effacement du dossier en mémoire.

ENTRER NOM Message indiquant d’entrer le nom dans l’un des 10 emplacements-mémoire.

ENTRER NUMTEL Message indiquant d’entrer un numéro de téléphone dans l’un des 10 emplacements-mémoire.

DONNEES DATA L’information de l’appelant a été interrompue en cours de transmission ou la ligne téléphonique est excessivement bruyante.

PILE FAIBLE Indique que la pile du combiné est faible et doit être chargée.

NOUVEAU Indique qu’un ou des appels n’ont pas été écouté.

PAS D’APPEL Indique qu’aucun appel n’a été reçu.

PAS DE DONNEES Aucune information d’appelant a été reçue.

RECHERCHE Quelqu’un a appuyé sur le bouton PAGE sur la base.

PP SUR TALK Indique que l’information d’appelant est un numéro d’appe direct (NAD) et ne peut être formaté.

REPT Message de répétition d’appel. Indique qu’un nouvel appel du même numéro a été reçu plus d’une fois.

NOM INCONNU/ L’appel provient d’une région non desservie par le service APPEL INCONNU/ d’afficheur ou l’information n’a pas été envoyée.NUMBERO BLOQUE

46

Signaux Sonores du Combiné Signal Signification Un long ronflement (sonnerie en marche) Vous recevez un appel

Trois courts bips (plusieurs fois) Signal de recherche

Un bip aux 7 secondes Avertissement de pile faible

Conseils de DépannageSolutions - AfficheurAucun affichage

• Chargez complètement la pile (pendant 16 heures) ou remplacez-la.• Si vous utilisez l’alimentation c.a., assurez-vous que l’appareil est branché dans une prise

de courant non commutée. Débranchez le convertisseur d’alimentation c.a. de l’appareil et rebranchez-le.

Identification de l’appelant incomplète • L’appareil affiche ce message lorsqu’il détecte quoi que ce soit d’autre qu’une information

d’identification de l’appelant valide pendant la pause qui suit la première sonnerie. Ce message indique la présence du bruit sur la ligne.

Aucun CID• Pour utiliser les dispositifs d’identification de visiteur de cet appareil, vous devez être

abonné au service d’afficheur de nom/numéro standard ou au service d’afficheur d’appel en attente.

Solutions - TéléphoneLe combiné ne peut se connecter.

• Si l’un des combinés ne fonctionne plus, placez-le sur le poste de base principale pendant �0 secondes pour le réinitialiser.

Aucun signal de manœuvre• Vérifiez ou répétez les étapes d’installation. Le cordon d’alimentation de la base est-il branché dans une prise sous tension ? Le cordon téléphonique est-il branché dans la base et la prise téléphonique modulaire?• Débranchez la base de la prise téléphonique murale et branchez un autre téléphone

dans la même prise. S’il n’y a pas de signal de manœuvre dans le second téléphone, le problème peut se situer au niveau du raccordement ou du service local.

• Le combiné est-il hors de la portée de la base ? Rapprochez-vous de la base.• Assurez-vous que la pile est correctement chargée (16 heures).• La pile est-elle correctement installée ?

47

• Le combiné a-t-il émis un bip quand vous avez appuyé sur TALK/LINE1/flash1 ou TALK/LINE�/flash� ou le bouton handsfree? L’indicateur d’utilisation s’est-il allumé ? Il faut peut-être charger la pile.

La tonalité est CORRECTE, mais ne peut pas composer pour sortir • Assurez-vous que le TONE/PULSE plaçant sur la base est placé au type de service

téléphonique que vous êtes souscrit à.Le combiné ou base ne sonne pas

• Assurez-vous que le commutateur de sonnerie de combiné est mis en marche et la sonnerie basse est programmée au H.

• Le combiné est peut-être hors de portée. Rapprochez-vous de la base.• Il y a peut-être trop de postes sur la même ligne. Essayez de débrancher quelques

téléphones.• Voir les solutions pour “Aucun signal de manœuvre”.

Électricité statique, bruit ou fluctuations• Le combiné est peut-être hors de portée. Rapprochez-vous de la base.• Chargez la pile.• Assurez-vous que la base n’est pas branchée dans une prise de courant avec un autre

appareil ménager.L’unité émet un signal

• Chargez la pile pendant 16 heures.• Voir les solutions pour “Aucun signal de manœuvre”.• Remplacez la pile.

Composition-mémoire• Avez-vous programmé les touches d’emplacement-mémoire correctement ?• Avez-vous suivi la bonne séquence de composition ?

Le téléphone avec le service de tonalité compose pour sortir en mode d’impulsion• Assurez-vous que le téléphone est en mode de numérotation de tonalité.

Le téléphone ne composera pas pour sortir avec le service d’impulsio• Assurez-vous que le téléphone est en mode de numérotation d’impulsion.

Battery SolutionsIf you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:

• Short talk time• Poor sound quality• Limited range

4�

Soins et EntretienVoici quelques conseils simples pour préserver le bon fonctionnement et l’apparence de ce téléphon:

• Éviter de placer le téléphone près d’un appareil de chauffage ou d’un appareil produisant du bruit électrique (ex. : moteurs, lampes fluorescentes, etc.).

• Ne pas exposer le téléphone directement au soleil ou à l’humidité.• Éviter d’échapper le combiné et de l’utiliser abusivement.• Ne jamais utiliser un nettoyeur puissant ou une poudre abrasive afin de ne pas

endommager le fini.• Conserver l’emballage original pour utilisation ultérieure..

Causes de Mauvaise Réception• Parements en aluminium.• Endos métallique d’isolation.• Conduites de chauffage et autre construction métallique pouvant bloquer les signaux

radio.• Trop près d’appareils comme un four micro-ondes, une cuisinière, un ordinateur, etc.• Conditions atmosphériques, comme un orage électrique.• Base installée au sous-sol ou à l’étage inférieur de la maison.• Base branchée dans une prise c.a. avec d’autres appareils électroniques.• Un écouteur de surveillance de bébé utilise la même fréquence.• Pile de combiné faible.• Hors de la portée de la base.

49

Information pour Accessoires

Pour commande, appelez le distributeur le plus proche pour votre secteur;Ontario: (905) 624-8516 Manitoba: (204) 783-2088British Columbia: (604) 438-8001 Quebec: (514) 352-9071Des frais d’expédition et de manutention seront ajoutés au montant de la commande.Nous sommes tenus par la loi de percevoir la taxe de vente appropriée pour chaque province dans laquelle la marchandise est expédiée. Les articles sont assujettis à la disponibilité des stocks.

DESCRIPTION No. PIÈCE BLACKAlimentation c.a 5-2605Pince-ceinture 5-2706Casque d’écoute 5-2425Pile de remplacement pour combiné 5-2548

50

ServiceAprès-VenteATLINKS Communications Canada, Inc., garantit à l’acheteur de cet appareil ou à la personne qui le recevrait en cadeau, que si cet appareil présente un défaut de fabrication pendant l’année suivant la date d’achat, il sera remplacé sans frais. Les frais de transport de retour sont payés.Cette garantie ne couvre pas les dommages attribuables aux accidents, à une mauvaise utilisation ni à des piles qui fuient.Si cet appareil ne fonctionne pas convenablement pendant qu’il est sous garantie:1. Le retourner au marchand vendeur avec la preuve d’achat pour être remplacé. OU�. Retirer les piles (s’il y a lieu) et emballer l’appareil et les accessoires dans la boîte originale (ou

l’équivalent). — Le faire parvenir port payé (avec la preuve d’achat) et assuré à : ATLINKS Communications Canada, Inc. c/o Thomson multimédia Ltd. 6200 Edwards Boulevard Mississauga, Ontario Canada L5T 2V7Les dispositions de cette garantie s’ajoutent (sans les modifier ni les restreindre) aux garanties légales et autres droits ou recours prévus par toute législation applicable; pour autant que ces dispositions tendront à rejeter, exclure ou limiter toute garantie légale ou tout autre droit et recours, elles seront considérées comme modifiées dans la mesure nécessaire pour s’y conformer.S’il est impossible de trouver un réparateur qualifié pour effectuer une réparation non garantie, écrire à : ATLINKS Communications Canada, Inc. c/o Thomson Inc. B.P. 0944 Indianapolis, Indiana, É.-U., 46�06-0944Joindre le reçu de caisse à ce guide pour référence ultérieure. Cette information pourrait être demandée s’il faut faire réparer l’appareil pendant qu’il est sous garantie.DATE D’ACHAT ______________________________________________________________________NOM DU MAGASIN ___________________________________________________________________

51

IndiceAAccessory Information 4�Acces à Distance 4�Activer ou Désactiver le Répondeur 1�Affic ID Poste �0Afficheur (CID) ��Afficheur D’appel en Attente ��Appel a Deux �0Appel a Trois �0Avant de Commencer 6

BBase - Langue des Messages Vocaux

et de L’affichage 1�Base - Nom 1�Base - Programmation

du Haut-Parleur 1�Base - Réglage de Date/Heure 1�Base - Réglage de Indicatif Local 15Base - Sonneries 15Base - Sonneries avant Réponse 1�Base - Timbre de Sonnerie 16Base - Tonalité de Touche 16Base - Tonalité la Mélodie VIP 16Base - Volume de Sonnerie 15Battery Solutions 47

CCauses de Mauvaise Réception 4�Code de Sécurité 1�Combiné �6Combiné - Langue des Messages

Vocaux et de L’affichage �1

Combiné - Réglage de Date/Heure ��Combiné - Réglage de Indicatif Local �4Combiné - Sonneries �1Combiné - Timbre de Sonnerie �1Combiné - Tonalité de Touche ��Combiné - Tonalité la Mélodie VIP ��Combiné - Volume de Sonnerie �1Commande de Volume �6Compatibilité avec les Prothèses

Auditives �Composer la Date 14Composer la Date �4Composition d’un Numéro D’appelant ��Composition D’un Numero Memorise ��Composition du Temps 14Composition du Temps �4Composition en Chaine a Partir

de la Memoire �9Conseils de Dépannage 46Consultation des Dossiers

D’appelants ��Consultation des Numeros Memorises �7

DDesenregistrement Global �7

EEcoute des Messages 40Effacer les Messages 41Énonce sur L’exposition au

Rayonnement RF de la FCC �Enregistrement ��Enregistrement du Dernier

Numéro Composé �6

5�

Enregistrement du Message d’Accueil 17Exigences de la Prise Téléphonique 6

FFacteur D’équivalence

de Sonnerie (REN) �Faire un Appel �5Faire un Appel D’interphone �9Filtrage des Appels a Partir de la Base 40Fixation de la Pince-ceinture 4�Fixer la Date 14Fixer la Date �4Flash �5Fonctionnement de L’interphone �9Fonctions Avancees de L’interphone �0

GGarde �7

HHaut-Parleur sur la Base �6

IImportantes Lignes Directrices

sur L’installation 7Indicateur de Chargement/Utilisation �5Indicateur De Messages De Combiné 40Information pour Accessoires 49Information sur le Réseau

Téléphonique �Insertion D’une Pause dans la Sequence

de Composition (D’un Numero Memorise) �7

Installation 7

Installation de la pile du combiné 10Installation de la Station de Base 11Installation des Piles

de Secours de la Base 11Installation du Téléphone 10Introduction 6

LL’écoute à Distance �7Laisser une Note 4�Licensing �Liste de Pièces 6

MMémoire �6Memoire Pleine 41Mémorisation d’un Nom

et d’un Numéro �6Memorisation de Dossiers D’appelants

(Dans la Memoire de L’afficheur) ��Memorisation des Dossiers D’appelants

dans la Memoire Interne �4Message d’Accueil 17Messages Affichés 45Montage au Mur 11

NNom du Combiné ��Nombre d’Essais �0

PPince-ceinture et Casque en Option 4�Poste de base 11Précautions à Prendre 44

Indice

5�

Présentation de la Base 9Présentation du Combiné �Principes du Téléphone �5Programmation du Combiné �0Programmation du Repondeur 17Programmez un Nombre

pour Transférer 19

QQualité de l’Enregistrement �0

RRaccordement d’un Casque Facultatif

au Combine 4�Reception d’un Appel D’interphone �9Reception de Dossiers D’appelants ��Recevoir un Appel Pendant

un Appel D’interphone �0Recomposition �6Réglage de l’Année 14, �4Réglage du Temps 14, ��Remplacement de la Pile 44Remplacement de Numero Memorise �7Remplacement du Message d’Accueil 1�Renseignements Importants �Renseignements Sur L’interférence �Renvoi d’Appel ��Renvoi D’appels Exterieurs

a D’autres Combines �1Répondre à un Appel �5Révision du Message d’Accueil 17

IndiceSServiceAprès-Vente 50Signaux Sonores du Combiné 46Soins et Entretien 4�Solutions - Afficheur 46Solutions - Téléphone 46Sourdine �6Suppression de Dossiers Memorises ��Suppression de les Dossiers

D’appelants �5Système de Sécurité Numérique 7

TTable des matières 4Table des matières 5Tonalite/Impulsions 14Transfert des Messages 19Transfert des Messages MARCHE/ARRET

19Transfert du Répertoire �9

U Utilisation de L’interphone Avec les

Appels Exterieurs �0Utilisation des Touches Programmables

1�Utilisation des Touches Programmables

�0Utilisation du Repondeur 40

VVolume Du Haut-Parleur 1�

Modèle �5�65000095�5 (Rév. 0 CAN E/F)06-14Imprimé en Chine

ATLINKS Communications Canada, Inc.© �006 ATLINKS Communications Canada, Inc.

Trademark(s) ® RegisteredMarque(s) déposée(s)