mocromax x360

8/6/2019 mocromax x360

1/89

1

Table of Contents

1.For your Safety 3

2.Mobile Phone Profile .8

3.Preparation before Use 12

4.General Instructions for Mobile

Phone .........................................................24

5.Basic operation ...36

6.UseMenuFunctions ...42

7. English Editor

Operation 124

8.Use USB ..1252

9.Appendix 126

10.Appendix 131

11.Appendix 1323

1.For your Safety

For your safety and proper use of the mobile

phone, please read the following guidelines

carefully: Do not switch the mobile phone on

when close to a chemical factory, gas station or

other explosive objects.

During driving, please use headset for

safety purpose; unless otherwise in

emergency, always stop the car on the

roadside to have a call conversation.


2/89

Because the use of the mobile phone can

cause interference in the aircraft, never

use the mobile phone in aircraft. The use

of the mobile phone is dangerous and

illegal; do switch off the mobile phone

before boarding.

Pay special attention to the use of the 4

mobile phone near heart pacemaker,

deaf-aid and some other medical

equipments, because the mobile phone

can cause interference with them.

Do not dismantle the mobile phone

without permission. In case of failure,

please contact the supplier as soon as

possible.

Do not plug the charger into the mobile

phone and charge without battery. Always

power off the mobile phone when taking

out the battery; otherwise the memory of

the phone may be damaged.

When charging the mobile phone, always

keep it in the place with good ventilation,

heat sink and away from flammable and

explosive objects.

In order to avoid demagnetization, always 5


3/89

keep the mobile phone away from

magnetic objects such as CD, credit card

etc.

Ensure the mobile phone does not come

in to

Do not use the mobile phone in the

environment at too high or too low a

temperature, never expose the mobile

phone under strong sunshine or too wet

an environment. The suitable temperature

for the phone and accessories is 0 -40 .

The height to use the phone shall be less

than 2,000m.

contact with any liquid; once such a

case occurs, remove the battery and

contact the supplier immediately.

Do not use liquid or wet cloth with strong

cleanser to clean the mobile phone.

This mobile phone has shooting, video6

and audio recording functions, which shall

be used as per the related laws and

regulations.

Always keep the mobile phone out of

children s reach. Do not throw the mobile

phone because violent treatment to the


4/89


5/89

(Below is the front of the mobile phone)

Screen

OK key

Right soft key

Left soft key

SIM1 Send/Dail key

Number key

Send/Dail key End key

Receiver10

(Below is the side of the mobile phone)

USB port1112

(Below is the back of the mobile phone)

Battery Cover

Camera Speaker13

3.Preparation before Use

Install SIM Card

Sim 2

Sim 1

Battery Cover

Battery 14

When registering a mobile phone number,

you can apply for two different phone numbers,

two different mobile phone network service

providers and thus obtain two SIM (Subscriber


6/89

Identification Module) cards.

With these two SIM cards, you can use all

functions of your mobile phone. The SIM cards

save the parameters needed for

communications and personal data, including

PIN (Personal Identification Number) code,

phonebook, short message and other extra

system services.

Warning: Do not distort or scratch the SIM card

nor let it come in contact with static, dust or

moisture. If it is lost, please contact your

network operator immediately for help.

Before SIM card installation, please switch 15

off the mobile phone. The SIM card is installed

on the back of the mobile phone.

Follow the following diagram to install the

SIM card. Please insert the host SIM card into

the SIM1 slot and the slave SIM card into the

SIM2 slot.

Note: If SIM card is inserted only into the SIM1

slot, then only the host works; likely, If SIM card

is inserted only into the SIM2 slot, then only the

slave works. When two SIM cards are inserted

into the SIM1 slot and SIM2 slot respectively,

you can choose work mode freely as you wish.


7/89


8/89

continuous complete charges and discharges.

When the battery is used up, charge it in

time. Over-discharge can damage the battery.

After the battery is fully charged, cut off the

connection of the charger with the AC power

supply and then the connection with the mobile

phone.

During charging, the battery capacity icon

on the screen flickers from the right to the left.

After the battery is fully charged, the icon is full

of bars. Slight heat during charging is normal.

Warning: When a travel charger and its

accessories are used to charge the battery,

please firstly check if they are original or

recognized by the original manufacturer. The

use of other accessories may damage your

mobile phone and cause risks! Always use them 19

indoor and at dry places. 20

Notice on using the battery

The performance of the battery is affected

by many factors, including radio barrier, network

settings, signal strength, work, temperature,

chosen and used functions or settings as well as

phone accessories, tone, data or other

applications.


9/89

For optimal performances, please follow the

rules below:

New battery or the battery having been

idle for long needs charging for long. The

standard voltage scope for the battery is

3.6V-4.2V.

During charging, keep the battery at room

temperature or similar temperature.

With time passing by, the battery will

gradually be worn out and thus need

longer time to charge. This is normal.

However, after normal charging, if call 21

duration decreases but charging time

increases, you need to buy another

battery from the original manufacturer or

authorized by the original manufacturer.

The battery of inferior quality can damage

your mobile phone and cause danger!

If the phone is overused at low battery

when charging, it might need a longer

time for the charge indicator to be shown

on the screen.

Note: Please dispose the battery according to

the local regulations. Try to recycle the battery

as soon as possible. Do not treat the waste


10/89


11/89

change the locked PIN2 code, you need to use

PUK2 code. If these two codes are not provided 23

together with the SIM cards, ask the local

service provider for them.

Warning: If the PIN code is entered wrongly for

successively three times, the SIM card will be

locked. Please contact the network operator

immediately for help. Attempt to unlock the code

may make the SIM card ineffective forever! 24

4. General Instructions for Mobile Phone

Dial key

It is used to dial a call (with phone number

entered or in phonebook state) or receive an

incoming call. In standby state, press this key to

display the latest call register (SIM1 and SIM2

support respectively 20 call entries, including

received calls, missed calls and dialed calls). In

dual-SIM standby mode, press this key to have

an option menu on which you can choose to

operate via SIM1 or via SIM2.

Switch-on/off key /End key

In call state, it is used to interrupt a call; in

call conversation state, it is used to end a call or

exit from the current menu and back to the 25

standby state. Hold this key for 4~5s to switch


12/89

on/off the mobile phone.

Ok key

Press the ok key to have the functions

indicated in the bottom row of the main screen

of the mobile phone.

Functional direction key

This mobile phone has four direction keys,

with the left, right, up and down control functions.

In some interfaces, they have special function,

for example, in call state, press the up/down key

to adjust volume. Similarly, these four direction

keys can be set with shortcut functions. Shortcut

keys can be active only in standby state and

their function definitions can be set by you with

the procedures as: enter the phone settings

menu, choose dedicated key function to re-edit

the direction keys.

Standard keypad

On the keypad, you can see 0-9 number

keys, * key and # key, total 12 keys.

Press these keys to enter phone number,

password, English letters, and symbols etc, or 26

choose menus.

Note: In standby state, hold 1 key long to

call the voice inbox service center. The number


13/89

for the voice inbox should be preset.

In different states or different functional

menus, * key and # key have different functions:

Press # key long to start or exit from the

silence mode.

Continuously press shortly or press long *

key to input P , " " or "W" , among which,

P and W are used for extension calls

while + for international calls.

In music player state, * and # are

used to adjust volume.

FM Radio function key

Down key: In radio state, press the key to

turn on/off radio.

Ok key: Activate radio recording.

Up key: Switch between search or fine

tuning. 27

Left/Right key: In search state, press the

left/right key to search channels forward

and backward until you find an effective

channel. In fine tuning state, you can have

a tuning of 0.1MHz downward or

backward.

1-9 number keys: If they are pressed

shortly, you can switch to the


14/89


15/89

Missed call29

Unlocked

Master line1

Slave line1

Master line2

Slave line2

MMS BUSY

MMS unread

SIM1 All calls diverted

SIM2 All calls diverted

Locked

SIM1 E-mail

GPRS

Continuous display indicates the Bluetooth

function has been activated and can be 30

searched; flickering indicates that data is being

transmitted.

Bluetooth function has been activated and

can be searched

Disconnected

Language and Input Mode

The mobile phone has English input mode.

For different areas, there are different

languages and corresponding input modes.

Call hint


16/89

The mobile phone is inbuilt with vibration

motor and buzzer and provides several

incoming call modes:

Ring

Vibration

Ring after vibration31

Vibration and ring

Services

Services are provided with SIM kit. The

mobile phone supports this service function.

The detailed menu items depend on SIM card

and the network. When the network provides

such function and your SIM card supports such

function, the service menu will automatically be

posted in the services of the mobile phone.

Caller groups

The caller group in the mobile phone

includes friends, family, VIP, business and

others etc. You can set different call tone and

photo for different caller groups. 32

Term Description

Dial domestic calls

The simplest method to dial a domestic

call is to enter the phone number via the

number keypad, then press dial key to dial


17/89

call. To change phone number, press C

key . During dialing, the screen will

display an animation. If SIM card 1 calls,

"SIM1-" occurs; if SIM card 2 calls,

"SIM2-" occurs. When the other party is

connected, the screen will display the

corresponding information.

Press end key to end the call.

To dial a domestic call, enter area code +

phone number and then press the dial

key.

Dial international calls

If you want to make an international call,

you can press * key continuously until the

international dialing prefix + is seen on 33

the screen. This will allow you to make an

international call from any country without

knowing the dialing prefix.

After entering the prefix, you need to enter

the Country number and complete

telephone number. You can enter the

Country number according to the common

practice, such as, 49 for Germany, 44 for

Britain, 46 for Sweden, etc.

Dial international telephone numbers as


18/89

following: + Country number +Complete

telephone number + Dial key.

Dial fixed-line telephone extension

Some fixed-line telephone extension may

not directly get through, so you need to

connect to the switchboard at first then put

through the extension number. The mobile

phone can automatically dial extension

number if you enter P between the

switchboard and extension number.

Method for input P as following: hold 34

press or continually short press three

times * key ( P will be shown on the

display).

Dial fixed-line telephone extension as

following: phone number + P + extension

number + dialing key

Emergency calls

If your phone is under the network

coverage (you can know this by checking the

signal bar at the top left corner on the screen),

you can make emergency calls. If your network

supplier does not provide roaming service in this

area, emergency will be shown on the screen.

That means you can only make these kind of


19/89


20/89

following on the display by sequence:

1. Enter phone password If you have set

the password.

2. Enter SIM password If you set SIM

card password.

3. No service Indicates failure to register

and make any calls.37

4. Emergency calls only indicates has

registered to other network and can only

make a call to the emergency numbers.

5. Searching the mobile phone is searching

for the preferred network.

6. Operator name Indicates network being

successfully registered.

Note: If you do not know the PIN code, please

contact the network service provider.

The default phone password 1122

Switch off

To switch off the mobile phone, press the

end key. When the screen displays switch-off

animation, the host and the slave will be off at

the same time. Do not take out the battery to

switch off the mobile phone. If so, the SIM card

can be damaged easily and some data will be 38

lost.


21/89

Dial a Call

With the number keypad, you can enter

phone numbers (if wrong characters are

input, press the clear key to delete them).

Press the dial key to dial the phone

number. In SIM1 and SIM2 ON state, you

can choose to dial a call via SIM1 or SIM2.

To end a call, press the end key; or to

cancel a dial, press the Cancel key or the

switch-on/off key. After the call is

connected, you can see the call timer on

the screen.

Dial a call via phonebook: Enter the

phonebook and search the desired

name/phone number, and then press dial

key to dial a call.

Redial latest dialed number: In standby 39

state, press Call key to view the list of the

latest dialed 20 phone numbers or names.

Scroll to the desired phone number or

name and press dial key to dial call.

Adjust Receiver Volume

In call conversation, press the upper direction

key or lower direction key to adjust the volume

of the receiver.


22/89

Answer a Call

When there is a call, as per the settings of

the mobile phone, you will be alerted with ring,

vibration, vibration and ring as well as vibration

then ring.

To receive a call, press Dial/Call Key.

To refuse a call, press Switch-on/off key or

the end key directly. 40

If the CLI (Call Line Identity) is opened, the

phone number of the caller will occur on the

screen. If this number has been saved in the

phonebook, the name corresponding to this

number will be displayed on the screen.

Send DTMF Signal

When this function is set, in call

conversation, press the desired number key and

* key and # key to send DTMF signals to the

other party.

Dial Hold

If you have applied for dial hold, in the call

conversation process, press Options to have

the following function menus:

Hold: Hold the current call but with the line 41

keeping connected.

End: End the current call conversation.


23/89


24/89

and SIM card 2 unread SMS icon is marked with

2 .

Missed Calls

When there is a missed call incoming, the

screen will display a missed call icon. Press

Read to enter and read missed calls. 43

Connect to Voice mail

The mobile phone allows connecting the

incoming call into the voice mail and then you

can receive a notice about voice message. (The

voice mail number must be preset).

Note: Voice mail needs the support of the

local network.44

6. Use Menu Functions

6.1 Messages

[SMS ]

SMS is a kind of network service that is

used to send and receive short messages. This

service cannot be used until you apply to the

network operator.

Both SIM cards of the mobile phone can

send and receive SMS. The SMS is sent to the

SMS center of the network and then sent by the

network to the target user (GSM user). If the

user does not switch on the mobile phone or the


25/89

mobile phone cannot receive the SMS (the

memory is full), the network will save the SMS

temporarily. The duration of storage depends on

sender s settings and network service provider.

With this function, the mobile phone can 45

send and receive chain text messages, which

may affect the message fees. For more

information, please consult the service provider.

When the SMS capacity is full, there will be

an SMS icon flickering on the standby interface.

The full capacity can affect SMS reception.

Delete some SMS to solve the problem.

If the other party has received an SMS, you

will hear the alert sound from the mobile phone

(if such alert function is set as ON)

Note: When sending SMS via the SMS network,

the mobile phone may display Message sent .

It indicates that the SMS has been sent to the

SMS center inbox set in the mobile phone but

does not mean the receiver has received the

SMS. For more information, please consult the

service provider.46

Write Message

You can write message in this menu.

Every SMS can contain about 600 worl


26/89

The mobile phone can send the chain SMS

of more than 600 characters (limit for common

text messages). If the SMS contains more than

140 English characters, then the SMS will be

split into 2 parts or more. You can insert images,

d length

English characters; To write SMS, press # key

to switch input modes, * key to select Symbol;

press Clear key to clear one character before

the cursor, long press Clear key to delete all

characters; press the end key to go back to the

standby interface, press the up and down

direction keys to choose characters, press

select key to confirm.47

emoticons, rings etc into SMS. However, the

SMS will not be received and displayed unless

the network and the receiving mobile phone

support the same.

You can enter the phone number or choose

a number from the phonebook to send the SMS.

In dual-SIM standby mode, you can choose to

send the SMS via SIM1 or SIM2.

Inbox

You can see the SMS in the inbox.

Reply: You can reply to the received SMS.


27/89

Delete: Delete the current SMS.

Forward: You can edit the current SMS or

send it after editing.

Copy to Phone: You can copy the entries in

SIM card onto the phone.

Move to Phone: You can move the entries

from the SIM card into the phone.48

Delete All: You can delete all SMS in inbox.

Copy all: You can have two options: Copy all

the entries (of the Inbox) from the SIM card

memory into the phone memory; or

vice-versa.

Move all: You can have two options: Move

all the entries (of the inbox) from the SIM

card memory into the phone memory or vice

versa.

Use Number: You can extract a number

from the SMS and either save it or choose

to dial a call.

Use URL: You can link to the website

contained in the received SMS.

Chat: Select chat room, and set a remote

number to chat.

Outbox49

While sending an SMS, if you choose to


28/89

Save and Send , you can save the SMS into

the Outbox. You can directly save the edited

SMS into the Outbox, in such a case; the

Outbox will display No number , i.e. no target

number. If you fail to send the SMS, it will be

saved in the Outbox. Also, you can choose from

options like: send from SIM1, send from SIM2,

edit, delete, copy to phone move to phone,

delete all, copy all, move all, use number and

use URL .

Templates

With this, you can pre-edit some common

phrases, which would be convenient for quick

SMS editing.

Message Settings

You can set some parameters of the SIM1

SMS or SIM2 SMS in the menu. 50

Profile Setting: To send SMS, you must

enter the SMS center number.

Note: The SMS center number is provided by

the network operator.

Common Setting

Delivery Report: The network will

inform you whether the other party

has received the SMS or not.


29/89

Reply Path: You can send the reply

path to the network terminal. This

function needs support from the

SMS center.

Memory Status: You can view the SMS

memory status in the SIM card or the

phone.

Preferred Storage: You can set the

storage position (SIM or phone) for

SMS. 51

[MMS ]

MMS can contain words, sound and photos.

If the MMS inbox is full, the mobile phone will be

unable to receive the MMS. If the MMS contains

photos, the mobile phone will adjust photos so

as to display them on the screen completely.

The display effect of an MMS depends on

reception devices.

Note: You cannot use photo messages unless

the network operator or service provider

supports to do so. You cannot receive and

display an MMS unless the mobile phone has

the compatible MMS or e-mail function.

Write Message

Receiver


30/89


31/89

bookmark

Preview: You can preview the editing

effect of the MMS.

Slide timing: You can set the play time of

the current page MMS.

Inbox

You can see the MMS in the inbox and have

the following operations:

View: You can view the MMS and save

photos, audio and annex.

Reply: Reply to the sender with MMS.

Reply by SMS: Reply to the sender with 54

SMS

Reply All: If the MMS you receive has been

sent to many receivers by the sender, with

such functions, you can send a reply MMS

to the same receivers.

Forward: You can directly forward this MMS

to others.

Delete: Delete the current MMS.

Delete All: You can delete all MMS in inbox.

Save as template: take a new MMS as a

template

Properties: the details of the new MMS

including subject, date and file size.


32/89


33/89

Best page time: You can set it to on

or off

Automatic Signature: You can select the

on/off tab for such a function.

Signature: You can edit the content of the

automatic signature.

Sending Settings:

Validity Period-- You can set validity

period to 1h, 6h, 12h, 1d, 1week or

Maximum.

Delivery report--You can select the on/off

tab for such a function.

Read Report- You can select the on/off


Priority-- Including Normal, High and low.57

Slide timing-- The time space when the

other side reads the MMS. Default is five

seconds. Max sliding timing: 60 seconds.

Delivery timing-- Immediately in one

hour in twelve hours in 24 hours.

Retrieve:

Home Network-- Delayed, immediate and

rejected.

Roaming The same as the home

network: including as home, Delayed


34/89

and rejected

Read Report on request, Send, never

Send

Delivery Report-- on and off.

Filter:

Anonymous-- Allow and reject

Advertisement Allow and reject.58

Server Settings: In Dual-SIM mode, you can

separately set SIM1 and SIM2. After choosing

Settings, you can have the following settings:

Activate profile

Edit profile

Rename profile-- Set name.

Homepage The website for editing

MMS

e.g.: http://100.1.201.171:10021//mmsc/

Data account

Airtel MMS

Connection Type--WAP, HTTP.

.

User Name-- You can edit the name of

the user.

Password-- You can set password.

Memory Status:


35/89

You can see the utilized space of the 59

mobile phone, including the used space and the

free space.

[Chat]

In standby, choose [Menu/Info/Chat] to enter

Chat Room 1 and Chat Room 2 to have a chat.

[Voice Mail Server]

This is a kind of network service, which

cannot be used until you apply to the network

operator or open it. Please consult the local

service provider for more details and voice mail

number.

Edit: You can edit name and edit the voice

mail number. Press the OK key to save

the number.

Connect to Voice: You can dial the voice

mail number saved in the voice mail 60

number function list. If you have two

phone numbers, they will have their own

voice mail number.

Tip: In standby state, after the voice mail

number is set, press 1 key to call the voice mail.

In Dual-SIM standby state, you can choose to

call the voice inbox via SIM1 or SIM2.

[Broadcast Message]


36/89

Broadcast is a kind of information service

such as weather report, traffic etc that the

network operator sends to the GSM users within

a certain area. In Dual-SIM mode, you can

separately set SIM1 and SIM2.

Receive Mode: You can select the on/off


Read Message: You cannot read the

received information until you open such a 61

function.

Languages: You can set the language for

the received information.

Channel Settings: You can choose, add

and edit and delete channel numbers.

6.2 Phonebook

The mobile phone is provided with the

business card folder type phonebook. The

information of every contact saved on the

mobile phone includes three phone numbers

(mobile phone, home phone and company

phone), company name, e-mail, fax, birthday,

caller picture, caller video, caller ringtone,

callers group (five types: family, friends, VIPs,

colleagues and others). Every contact saved

into SIM1 and SIM2 can only include name and


37/89

number. The mobile phone supports 500 groups 62

of numbers.

[Quick Search]

Enter the starting letter of the name of the

person you wish to search for in the phonebook.

E.g. search Zhang, input z in the input area,

then you can find it.

[Search contact]

Enter the name to be searched, press

Search in the phonebook, and then you can

find the matching name.

[Add New Contact]

You can save phone numbers into the SIM

card or the phone. In the SIM card, one entry

has only name and phone number. In the phone,

one contact can include Name, Number, Home

Number, Company Name, E-mail Address,

Office Number, Fax Number, Birthday, Associate

Picture, Associate Sound, caller video/picture63

and Caller Group.

Tip: If one contact is set with photo link, tone link

and callers group at the same time, then the

callers group function will be inactive.

[Copy all]

You can copy all the contacts from SIM1 to


38/89

phone, from phone to SIM1, from SIM2 to phone,

from phone to SIM1, from phone to SIM2, from

SIM1 to SIM2 and from SIM2 to SIM1

[Delete]

You can delete the contacts from SIM1,

from SIM2 and from phone or one by one

[Caller Groups]

You can set call tone, photo and members for all

the five caller groups. Caller group members

can only come from the number saved on the

phone.

[Extra Number]64

You can separately set SIM1 and SIM2 s

My Caller ID, service numbers and emergency

numbers (the latter two need the support of the

SIM card; consult the network operator for

details).

[Phonebook Settings]

Memory Status: You can view the current

use status of the phonebook, including

SIM1, SIM2 and phone memory. The

display format is Used/Total .

Preferred Storage: You can choose the

storage path for the current number.

Fields: You can choose the display items in


39/89

the phonebook and the display items in the

Add Contact interface.

My vCard: You can edit and send my

business card. 65

Vcard version: including vcard 2.1 and

vcard 3.0

Phonebook backup: You can import or

export the contact.

[Caller picture]

You can set call picture.

[Caller ring tone]

You can set call tones.

6.3 Call center

In Dual-SIM mode, you can separately

search the call register of SIM1 and SIM2. In

mono-SIM standby mode, you can set the

available SIM card and see its call register.

Call history includes missed calls, dialed

calls and received calls, delete call log, call time,

call cost, SMS counter, GPRS counter etc.

In missed calls, received calls and dialed 66

calls function list; you can see the date and time

of the call, edit or delete the phone number in

the list, save the number to phonebook or send

SMS and MMS to the number, etc.


40/89

Note: SIM1 and SIM2 contains respectively

40 entries. Choose any entry from missed calls,

received calls and dialed calls, press the Send

key to dial the number directly.

Call time

Last Call time: With this function, you can

view the last call time.

Dialed Call Time: With this function, you can

view the duration of all dialed calls.

Received Call Time: With the function, you

can view the duration of all received calls.

Reset all time: With this function, you can

clear all duration records of calls.

Note: The actual call duration and service time 67

in the bill of the service provider may be different

from them, which depends on the network

functions, accounting rounding and tax etc.

Call Cost

This needs the support of the network service

provider.

Last Call Cost: With this function, you can

view the fees of the last call.

Total Cost: With this function, you can view

the fees of all calls.

Reset Cost: With this function, you can clear


41/89

all fee records.

Max Cost: With this function, you can limit

call fees in the specified pricing unit or

currency unit. PIN2 code must be entered to

set call cost.

Price per Unit: This function needs network

support. For more details, please consult 68

the network operator.

SMS Counter

With this function, you can see and preset

the number of sent messages and received

messages.

GPRS Counter

Last Sent: You can view the sending

traffic of last link.

Last Received: You can view the

reception traffic of last link.

All Sent: You can view the sending

traffic of all links.

All Received: You can view the

reception traffic of all links.

Reset Counter: You can clear all link

traffic.

General call settings69

Caller ID: Including set by Network, hide


42/89

ID and send ID.

Set by Network: While having a call

conversation, you can send my

caller ID in the form preset by the

system.

Hide ID: While having a call

conversation, you will not send my

caller ID. If the system does not

support such function, call may fail.

Send ID: While having a call

conversation, you can send my

caller ID to the system.

Note: This function needs network

support.

Call Waiting: You can set this function to

On or Off. The call hold and multi-party

call cannot be active unless this function 70

is activated. This needs network support.

Call Divert: This is a kind of network

function, which cannot be used unless you

apply to the network operator for it. With

this function, you can divert calls to

another number.

Name Description

Divert All


43/89

Voice Calls

The network will divert all

voice calls without

conditions.

Divert if

Unreachable

When the network cannot

find your mobile phone

(switched-off or out of the

service area), it will divert

the calls.

Divert if no

Answer

When the mobile phone

does not answer the call, 71

the network will

automatically divert it.

Divert if

Busy

When you are on line, the

network will divert the call.

Divert All

Data Calls

Network support needed.

Cancel All


44/89

Diverts

Cancel all divert

functions.

Call Barring

Outgoing Calls:

1. All Calls: You can bar all outgoing

calls.

2. International Calls: You can bar

international calls.

3. International Calls Except To

Home PLMN: When abroad, you

can dial the calls of the current 72

country and the original country

(the service providers allows to do

so).

Incoming Calls:

1. All Calls: You can bar all incoming

calls.

2. When Roaming: You can bar all

calls except the calls of the local

service area.

Cancel All: You can cancel call barring

settings and dial/receive calls

normally.

Change Barring Password: You can apply


45/89

to the network to change the

password for call barring.

Line Switching: You can choose Line 1 or

Line 2.

Closed User Group: This function needs 73

network support. Please consult the local

operator for details.

Black list: You can set it as On or Off. You can

use the menu to reject the number you do not

want to receive.

Auto Redial: You can set it as On or Off. After

the first automatic redial fails to connect, the

network would try to reconnect for not more than

10 times.

Speed Dial: You can set whether to activate this

function and edit the related speed dialing

numbers. If this function is Active , then you

dial any of the corresponding individual keys

(2-9) on the standby interface to dial the number

specified for this key.

Background sound:

Select when making calls: By selecting this

option during a call, background music would 74

start playing coming. By deselecting it, you can

turn this function off.


46/89

Playback Settings: You can set volume and

continuous play interval.

Effect List: There are 10 kinds of defaulted

background music such as motorcycle and

walking on pavement etc.

Call time Display: You can set whether to

display call duration during call conversation.

Call Time Reminder: You can set one alert

tone or periodic alert tone for several round

minutes during call conversation so that you can

understand call time. You can turn off the alert

tone.

Auto quick end: You can set a call duration

time. After the set time expires, the mobile

phone will automatically end the call.

Note: Some settings need network support. For 75

example, call barring cannot be used unless the

local network and SIM card approve of it.

6.4 Multimedia

[Camera]

With this function, you can use the inbuilt

camera to take photos. The lens of the camera

is located on the back of the slide and the

screen is used as the viewing window. All

photos taken are in JPG form. After


47/89

downloading the photos onto the PC, you need

some software to view them.

If the storage space of the mobile phone is

insufficient to store the taken photos, it is

necessary to delete some old photos or other

files in File Management function list to release

more space.

Description of Mobile Phone Options: 76

Options Description

photos To view the saved photos.

Camera

Settings

Shutter Sound: sound 1, sound 2,

sound 3 and Off.

EV: EV-4 EV+4

Banding: 50Hz(default), 60Hz

Delay Time: 5s, 10s, and 15s or Off.

Cont.Shot: 1 Shot, 3 Shot , 5 Shot

and Off.

Image

Settings

Size:

240*320,160*120,320*240,640*480;

1280*1024

Quality: High, Normal, Low


48/89

White

Balance

Auto, Daylight, Tungsten,

Fluorescent, Cloud, Incandescence77

Scene

Mode

Auto, Night

Effect

Settings

Normal, Grayscale, Sepia, Sepia

green, Sepia blue, Color invert

Add

Frame

There are 2 options available.

Storage Phone, Memory Card

Restore

Default

You can restore the recorder to

factory settings.

[Image viewer]

All photos taken are saved in the album.

Options Description

View

You can view the selected

photos.


49/89

Browse There are two browse styles, i.e. 78

Style list and matrix.

Use As

You can send photo to

Wallpaper, Screen saver,

Switch-on, Switch-off, Caller

picture.

Send

You can send it to MMS, Email,

and Bluetooth.

Rename

You can rename the selected

photo.

Delete

You can delete the selected

photo.

Delete All

files

You can delete all photos in the

album.

Sort by

For convenience of search, you

can rank them as per name,

type, time and size or choose

None .79


50/89

Storage

You can choose photos storage

path (to phone or memory card).

[Video Recorder]

Press the OK key to start video recording.

The duration of recording depends on the time

limit set and file management capacity. Entering

the options, you can have the following settings:

Options Description

camcorder

Settings

You can set White Balance,

EV, Night Mode and Banding

for your recorder so as to have

high-quality videos.

Video

Settings

You can set Cartoon Quality

Effect There are 6 options available.80

Setting

Restore

Default

You can restore the recorder to

factory settings.81

[Video player]


51/89

It supports the videos in AVI, 3gp and MP4

formats. In these formats, you can have the

following operations to the specified file.

Options of the player

Options Description

Play

It supports the videos in AVI (upto

10fps),3gp (upto 25fps) and MP4

(upto 25fps). Click the play

interface to play.

Rename

You can rename the specified

video.

Delete

You can delete the specified

videos.

Delete

All files

You can delete all files. 82

Sort by

For convenience of search, you

can rank them as per name, type,

time and size or choose None .

[Audio player]

If the operation system is Windows 2000


52/89


53/89

Enter the track list and

update it (e.g. the deleted

music in the file

management will not

disappear until update is

conducted. 84

Settings Play Settings: Track list path,

automatic track list, repeat,

random and background

play.

[Sound Recorder]

After choosing Sound Recorder and press

OK to enter, you can play the previous record

files. Press Options to have the following

operations:

Record: You can record new files.

Play: You can play the selected file

Append: You can have annexure record

for the files of the superior level (only for

the record files in AMR).

Rename: You can rename the chosen file.

Delete: You can delete the chosen file.

Delete all files: You can delete all files. 85

Settings: You can set the storage position

for record files, including phone and


54/89

memory card. Also you can set the format

of the record file, including AMR and WAV.

Use As: You send the recorded file to

Bluetooth, profiles and MMS.

[FM Radio]

Your mobile phone supports FM radio. To

use the mobile phone to listen to the radio,

insert the headset connection cable into the

headset port in the mobile phone. The headset

connection cable functions as the antenna of

the FM radio, so it could hang freely. While

listening to the radio, you can dial or receive a

call normally. During call conversation, the radio

will turn mute automatically. If some applications 86

are using GPRS or CSD to send or receive data,

they may interfere with the radio.

When the FM radio is activated, the mobile

phone will display the number and name (if

having been saved) and frequency of the radio

channel. If you have saved some radio channels

(at most 9 channels) in the mobile phone, you

can roll to choose the desired channel or press

any of the number keys from 1-9 to choose the

corresponding channel.

Option menu


55/89

Channel list: You can edit and save 20

channels.

Manual input: You can edit the specified

radio frequency band. The frequency of

the radio is between 88MHz and

108.0MHz.

Preset Auto Search: You can have 87

automatic search and save the searched

channels into the list.

Settings: You can set background play,

and loud speaker.

Record: You can record new files.

Append: You can have annexure record

for the files of the superior level (only for

the record files in AMR).

File list: the record files

[Schedule FM recorder]

Micromax X360 comes with a unique feature of

FM Scheduling. This feature enables you to

schedule the radio to power ON itself and record

your favorite program. You can set the time,

date, and channel and record functions to

record the desired program. It can record 4

programs for you to enjoy them anytime later at 88

your own wish. On pressing Edit, you will have


56/89

following functions to set:

Power ON/OFF

Date and Time

Repeat

Channel Settings

Record Settings

6.5 Fun &Game

[Games]

This mobile phone provides some inbuilt

games. Please refer to the operation

instructions attached to the games.

Game settings

BGM: On or off background audio.

Sound effect: On or off audio.89

6.6 Settings

[User Profiles]

Your mobile phone is provided with multiple

profiles so that you can customize some

settings in different cases for different events.

Firstly, as per your choice, have individualized

settings on the particular profile and then

activate it. You can have profiles such as

General, Meeting, Outdoor, Indoor, Headset and

Bluetooth.

The content can be edited at every profiles


57/89

mode as following:

Tone Setup: Includes Incoming Call,

power-on, power-off, Message Tone and

Key Tone.90

Volume: Set the volume of Ring and Key

Tone.

Alert type: You can choose any one from

Ring, Vibration, Vibration then Ring as the

current ring mode.

Ring Type: You can choose any one, from

single, repeat and ascending as the current ring

type.

Extra Tone: You can have on/off settings

on Warning Tone, Error Tone, camp on

Tone and Call Connect Tone so as to have

corresponding tone tips.

Answer Mode: You can choose whether to

use any key to answer.

After individualized settings, choose Activate

in Select to start profiles.

Note: After the headset is inserted into the

mobile phone, the mobile phone will 91

automatically change into headset profile.

Unplug the headset to return to the previous

profile.


58/89

In standby state, press # key to switch to

silence the profile and again to the previous

profile.

[Dual SIM settings]

You can in any place and at any time set the

Dual-mode mobile phone as the following

modes according to your own demand:

Dual SIM open

Only SIM1 open

Only SIM2 open

Flight mode

[Phone Setup]

In such menu, you can set phone language, 92

standby wallpaper, time etc.

Time and Date: With this function, you can

set city, time and date format and the time

of specific place.

Set Home City: You can set

different cities.

Note: This option must be used together with

auto update of time and date. Auto update of

time and data cannot be conducted unless the

network supports it.

Set Time and Date: You can set the

current time and date.


59/89

Set Format: You can set the display

format for time and date.

Note: If the battery is taken from the mobile

phone or the battery is used up for a long time,

when switching on the mobile phone after

reinstalling the battery or charging the battery, 93

you need to reset the time and date.

Schedule Power on/off: You can set the

time for schedule Power on/off.

Language: You can choose the desired

language for phone display.

Preferred Input Methods: You can set the

input methods of the mobile phone

according to your operation habit.

Display characteristic: You can set

standby menu display as wallpaper,

screen saver, power on display, power off

display, whether to display time and date

and owner number (if set in the

phonebook) and operator name.

Greeting text: You can set the greeting

text displayed on the main screen.

Shortcuts: Here, you can choose shortcut

function menu options; after specifying the 94

shortcut functions for the four function


60/89

keys, press the shortcut function key to

enter this menu.

Dedicated key: You can have

corresponding settings on the up, down,

left and right keys.

Auto update of date and time: To set the

mobile phone to automatically update time

and date according to the current time

zone, choose Activate . Auto update of

time and date will not affect the alarm

clock, calendar or alarm clock memo

setting time, which will be subject to the

time and date when created. However,

auto update of time and date may make

some set alarm clocks out of date.

Misc. Settings: You can adjust the

brightness and time of LCD backlight. 95

[Network Setup]

In Dual-SIM standby mode, you can

separately set SIM1 network and SIM2 network.

Network Selection: You can search the

network again. Select your favorite network and

choose to register the network automatically or

manually.

Preferred Networks: You can set the


61/89

preferred registered network for the SIM card.

[Security Setup]

In Dual-SIM standby mode, you can separately

set the PIN code, fixed dial and call barring of

the SIM1 and SIM2.

SIM Security Setup: it includes four parts,

see it as follow:

SIM Lock: You can set host SIM lock

(PIN code and PIN2 code) as on/off.

When this option is chosen, it is 96

necessary to enter PIN code each

time you insert the SIM card.

Fixed Dial: This function needs the

support of the SIM card and the

network operator. When it is

activated, you can only dial the

phone numbers saved in the host

fixed dial list. To activate it, you

need to enter host PIN2 code.

Barred Dial: You can set barring all

or some dials. (SIM card support

needed)

Change Password: You can change

password.

Phone Lock: You can set it as On or Off. It


62/89

is a password of 4-8 digits and the

defaulted one is 0000. You can change it.

Auto Keypad Lock: You can set it as On or 97

Off. The mobile phone has keypad lock

function. When it lasts a certain time, the

keypad will be locked, including such

options as Off, 5s, 30s, 60s and 5min.

Change Password: You can change the

defaulted phone password 0000 into

4-8-digit number that would be easy to

remember. If the phone lock is activated,

when switched on, the mobile phone will

hint Phone locked . To unlock it, you can

enter the phone lock password and click

OK.

[Restore Factory Settings]

You can restore the factory settings of the

mobile phone. The factory setting password is

0000 .

[Audio effect]

With this function, you can set audio effect.98

6.7 Network

With this function, you can access multiple

services on the Internet. These services include

weather report, news and financial and


63/89

economic information etc. This function is

provided by the network supplier. According to

the services the SIM card provides, there will be

new menu options occurring. If the SIM card

and network do not support this function, it will

be inactive. For more details, please contact the

network provider.

[WAP]

Homepage-- Start the website chosen in the

connection settings file.

Bookmarks--Yahoo and Sina. Enter the

options menu and have the following operations

on the bookmark: 99

Go to: Log into the chosen website.

Edit: Edit the chosen bookmark

name and website.

Send: You can send the bookmark

via SMS and via MMS.

Delete: Delete the chosen

bookmark.

Delete All: Delete all bookmarks.

Add bookmark: Add new

bookmarks.

Recent pages-- Record the latest 10 web

pages browsed.


64/89

Offline pages-- saved pages

Input address-- Enter the website that you

want to surf.

Service Inbox- The mobile phone can

receive the service information

( Recommended information) sent by the 100

service provider. For example, the service

information can be the notice of related news

headlines, which can include one piece of news

or a service website.

Settings

Select SIM

Edit profile

Activate profile

Edit profile

Rename profile Settings name

Homepage- Edit the pre-browsed

website.

Data Account- Choose the desired

network ID.

Connection type- Continuous link,

discontinuous link and HTTP.

User Name- The name of the user. 101

Password- Set password.

Note: The setting method of other WAP


65/89

settings files is the same as that of Airtel GPRS .

Setting Example:

Edit the settings file

Airtel GPRS

Activate the settings file

Edit settings file

Rename settings file name Setting name

Home-- Edit the pre-browsed website.

Network ID-- Choose the desired network

ID.

Link Status-- Continuous link,

discontinuous link and HTTP.

User Name-- The name of the user.

Password-- Set password.

Note: The setting method of other WAP

settings files is the same as that of Airtel GPRS. 102

Browse Options Using this option you

can set whether to display images during

idle time or while browsing WebPages.

Service Message-- You can choose ON or

OFF to receive service messages.

Clear Cache-- You can clear cache. When

the data of the cache is excessive,

network surfing speed can be affected.

Clear cookies-- You can clear personal


66/89

data.

[Data account]

GSM Data-- The use of GSM data will be

provided with the following ID information, such

as FET.

Account Name: FET

Number: 0936010010

User Name : blank

Password: blank103

Line Type: ISDN and analogue.

Speed: 9.6Kbps, 14.4 Kbps, 4.8

Kbps

DNS: 000.000.000.000

GPRS-- The use of GPRS data will be provided

with the following ID information, such as Airtel

GPRS

Account Name: Airtel GPRS

APN:

User Name: set name

airtelmms.com

Password: set password

Auth.type: General and confidential.

Note: For related charging standard and

detailed settings, please consult the local

network service operator. Different network


67/89

service providers provide different services.

Consult the local network operator.104

6.8 Organizer

[Calendar]

With this function, you can set the alarm

clock to remind you of your schedule and record

your schedule. Roll the highlight block to the

desired date and then the current date will be

highlighted in black. If the date is set with memo

function, then this date will be highlighted. To

view all memos of one day, press OK to see the

schedule. You can have the following

operations:

View tasks: You can view the schedule of

the date where the cursor is on and set

the time, date, content and whether to

activate alarm on this schedule. When

editing the schedule, you can choose

alarm type with the left and right direction

keys. In addition, you can have such 105

operations as Delete, Delete and Add on

the schedule.

Add task: You can select task types

reminder, meeting, course.

Jump to Date: You can move to the


68/89

calendar of the specified date.

Go to weekly view: You can go to weekly

and monthly view

[Tasks]

You can have such operations as Create

Memo, Browse, Add, Edit, Delete, Delete All and

Send on memos.

If you have set alarm for the memo and the

clock has reached the set time, the mobile

phone will start to ring and display the memo

content. 106

[Alarm]

The time format for the alarm clock is

identical to that of the clock. When the mobile

phone is off, the alarm clock can still work

provided the battery is sufficient. The system

has set 5 alarm clock options and the defaulted

is off. You can activate one option or all options

according to the actual demand. Every alarm

clock option can set independent time and date.

When the time is reached, the mobile phone will

give out an alert tone and flicker the current time

and date on the screen. Press Stop to stop

alarm clock or press Sleep for the mobile phone

to pause and then continue to ring every 4


69/89


70/89

[Unit Converter]

Weight: You can have the conversion

between kilogram, ounce and pound.

Length: You can have the conversion

between kilometer and mile, meter and yard,

meter and foot as well as centimeter and inch,

etc.

[Currency Converter]

To save exchange rate, press OK , then

choose to set exchange rate. Choose one

exchange rate from the displayed options. After

that, press OK to confirm. Then the exchange

rate will be saved in the memory until you enter

a new one to replace it. To convert currency,

enter the sum to be converted, press OK and 109

then choose to local currency or foreign

currency.

[Stopwatch]

Typical Stopwatch Respective Split

Timing Lap Timing and View Records.

nWay Stopwatch:

[Bluetooth]

The mobile phone supports the Bluetooth

function. You can use Bluetooth wireless

technology to set wireless connection with other


71/89

compatible devices, including mobile phone,

computer, headset, in-car accessories etc. With

Bluetooth function, you can send photo, video

segment, audio segment, personal business

card and memo. You can also establish wireless

connection with the compatible PC to transmit

files. 110

As the device supporting Bluetooth wireless

technology performs communications via

wireless wave, you need not keeping

Power: Before using Bluetooth function,

you need to activate this option. When

Bluetooth function or other functions are being

used, allowing this function to operate in the

back desk will consume more power. It is

the device

opposite to other devices. However, Bluetooth

connection can be affected by wall or other

electronic equipments etc. To ensure mutual

operation between this device and other devices

supporting Bluetooth wireless technology,

consult the manufacturer to confirm whether the

device by it is compatible with this device. Do

not use Bluetooth function in hospital and

aircraft etc.


72/89

Bluetooth Menu 111

recommended to close this function when it is

idle.

Inquiry audio device: With this function,

you can inquire about the audio device. For

other devices, enter My Devices to search.

My Devices: After entering this option, you

will see the Bluetooth device is compatible with

the mobile phone. Entering options, you can

have necessary operations on the desired

Bluetooth device or search the incompatible

Bluetooth devices.

Active Devices: With this function, you can

see all devices connected with the mobile

phone and their link service type. You can

interrupt the specified link service.

Settings: Before using Bluetooth function,

enter this menu to have corresponding settings.

If your mobile phone s Bluetooth function is not 112

activated, you can have activation confirmation.

Visibility: After this option is activated,

other peripheral devices supporting

Bluetooth wireless technology can see

your device and its name via search. After

the step audio play service is activated,


73/89

this device will be unable to search.

Change Device Name: You can edit my

device name.

Authentication: After this option is

activated, matching is needed when

peripheral device accesses my device via

Bluetooth (for matched devices as well).

After closing the option, no matching is

needed for the matched devices.

Audio Path: You can leave the audio on

my device or send to other hands-free

devices via Bluetooth. If you re using 113

Bluetooth to take a call, set this path as

hands-free devices.

Block List: You can block a specific

Bluetooth user from getting access.

FTP Settings: You can set the file

directory shared by my device and the

access right to online Bluetooth devices.

About: Here, you can see the name of my

device, my device s Bluetooth device address

and the Bluetooth services supported by my

device.

Tip: When searching Bluetooth devices, make

sure that the peripheral Bluetooth devices are


74/89

within the signal cover range and can be

searched. To match the searched devices, you

need to discuss with the user of this device

about a pair of matching passwords. To match

the hands-free device, you must enter its 114

matching password. After matching, this device

will be saved in my device view.

Use Bluetooth to Receive/Send Data:

1. Open the applications needed to save the

content to be sent. For example, to send photos

to another compatible device, you should enter

the album or file management.

2. Choose the content to be sent, and then

choose Options->Send->To Bluetooth. The

screen will display the device supporting

Bluetooth wireless technology and within the

signal coverage. To disconnect search, choose

Cancel .

3. Choose the device to be connected with.

4. If another device requires matching before

data transmission, the device will send a hint

and require inputting of a matching password.

5. After the connection is established, the mobile 115

phone will display data transmission speed.

6. When other Bluetooth devices send data to


75/89

my service, the mobile phone will hint and ask

whether to receive the data. The received data

will be stored in the initially set Received folder.

Tip: You can set the storage position to receive

files as other folders or the folders on T-flash

card. After setting, the file received via Bluetooth

will be automatically saved to the specified

folder.

Tip:

The function of using Bluetooth headset

for calls is limited to only host (SIM1) call

or slave (SIM2) call. If alternate SIM1 and

SIM2 calls are available, this function will

not be supported.

Before using Bluetooth headset for calls,

please go to the menu settings to confirm 116

that the audio path has been set as a

hands-free device.

Non-stereo Bluetooth headset cannot be

used to listen to music.

Use the following methods to disconnect:

Close the activated Bluetooth to

disconnect all devices.

Enter online devices and disconnect the

specified online service.


76/89

Enter my devices; delete the matched

devices to disconnect other devices with

my device.

The connection with the devices out of the

signal coverage will be ineffective.117

6.9 File Manager

You can manage photos, MP3 and other

folders.

[Phone]-- The storage body is phone.

[Open]: You can open Audio, Images, Photos,

My Music and Video folders.

Received

Audio Audio folder

Play: You can play the selected content.

Use As: You can send audio to Profiles,

MMS, e-mail and SMS.

Send: You can send the file via Bluetooth

and via multimedia message.

Details: You can see the date and size of

the file.

Rename: You can rename the folder.

Copy: You can copy the file into Audio,

Images, My Music, Photos, Video or 118

specified folders.

Move: You can move the file into Images,


77/89


78/89

in all current folders.

Sort by: You can rank files as per name,

type, time and size or choose None .

My Music MP3 Folder

Play: You can play the current MP3.

Use As: You can send music to Profiles,

MMS and SMS.


and via multimedia message.120


the file.



Images, Photos, Video or specified

folders.

Move: You can move the file into Audio,

Images, Photos, Video or specified

folders.

Delete: You can delete the current record.

Delete All files: You can delete all records




Photos Photo Folder

View: You can see the current photo.


79/89

Edit: You can enter photo artist and edit

the desired photo. 121

Use As: You can send photos to screen

saver, Switch-on Switch-off Phonebook,

MMS, e-mail and SMS etc.


and via multimedia message.


the file.



Images, My Music, Photos, Video or

specified folders.


My Music, Images, Video or specified

folders.




Sort by: You can rank files as per name, 122


Video Video Folder

Play: You can play the current video.

Use As: You can send videos to MMS,

e-mail and Bluetooth.


80/89

Send: You can send the file via Bluetooth.


the file.



Images, My Music, Photos, Video or

specified folders.


Images, My Music, Photos or specified

folders.



in all current folders. 123



Create Folder: Under the root directory, you

can create a new folder to save more detailed

files.

Format: Formatting can clear all files in the

mobile phone and newly created folders. After

formatting, you need to restart the mobile phone

and the Audio folder and Images folder will

restore automatically and Photos folder will

automatically occur after the first photo is taken.

Memory Card


81/89

Open: You can open the files in the

memory card.

New Folder: Under the root directory, you

can create a new folder to save more

detailed files.

Format: You can format all files in the 124

memory card.

7. English Editor Operation

The mobile phone provides multiple

convenient input modes, which can support the

use of other functions.

Basic letter input

After abc / ABC is chosen, enter your

desired letters with the standard keypad.

Number input

This mode is mainly used to enter phone

numbers etc. After a number is chosen, you

can enter a digit into the place where the cursor

is flickering. 125

Symbol input

In any of the above input modes, you are

provided with symbol input. If you cannot see

symbols, press * key to see them. If you want

one symbol, press the up/down/left/right key to

choose.


82/89

8.Use USB

Notices before use

Always connect and stop USB device

correctly.

Never use Windows formatting command

to format the mobile disk of the mobile

phone; otherwise, it will be damaged

severely.

USB work environment:

Windows2000 / XP.

For other operation systems, the 126

connection between PC and the mobile phone

cannot be conducted unless USB driver is

installed.

9.Appendix

Troubleshooting

Phenomena Possible Causes

Unable to

switch on

1. Does the battery

have power?

2. Is the battery placed

correctly

SIM failed

1. The SIM card is


83/89

dirty. Clean it.

2. Reinstall the SIM

card.

3. The SIM card is

damaged. Replace

it.127

Poor signals

Check the signal strength

icon on the screen. If the

icon contains 4 bars, it

indicates the signal is the

strongest; if below 1 bars,

it indicates the signal is

very poor. 128

Unable to dial

out

1. Maybe you have set

Hide My Caller ID

but your network

operator does not

provide this service

for you.

2. Strong interference

exists around you.

3. Maybe you have


84/89

activated the call

restriction function.

4. Maybe you have

activated Line 2 but

your network

operator does not

provide this service

for you.129

Unable to

charge the

battery

1. The battery may

discharge too much;

so it cannot be

charged until it is

connected for

certain time.

2. Its performance

has worsened.

Unable to

register to the

network

1. Too weak signals or

strong interference.

2. SIM card installed


85/89

properly? Bad

contact or SIM card

damaged? If the

SIM card is broken,

please contact the

network operator to

replace it.130

Photos taken

are too dark

1. Check if the too low

photo brightness is

set.

2. Check if ambient

ray is too dark.

Photos taken

are too

unclear

1. Check if the object

taken is moving.

2. Check if the mobile

phone shivers

slightly while you

press the shutter.

Photos taken

is distorted


86/89

The object taken may be

too close to the camera

lens.131

Unable to

access

service

menus.

Maybe the SIM card does

not support service

function.

Only part of

the photo set

as standby

photo can be

seen.

The size of the photo may

be too big. The

recommended size is

240*320.

10.Appendix

Abbreviations and Definitions

SMS Short Message Service

EMS Enhanced Message Service

SIM Subscriber Identity Module

GSM


87/89

Global System for Mobile

Communication132

PIN Personal Identity Number

PUK PIN Unblocking Key

IMEI

International Mobile Equipment

Identity

CB Cell Broadcast

GPRS General Packet Radio Service

MMS Multimedia Message service

Card

1

Host card (the card inserted in

SIM1 slot)

Card

2

Slave card (the card inserted in

SIM2 slot)

11.Appendix

Notices for the use of accessories

Battery

More than 12h charging is needed if 133

the battery if battery is new or that it

has been idle for too long.

Other batteries other than the


88/89

original one can damage your mobile

phone and cause risk! The short in

any form can lead to explosion, fire

or personal injury!

For your security and environment

protection, do not throw the battery

freely but put it into the specified

recovery place.

Charger

Do not plug the charger into the mobile

phone and charge without battery so

as to prevent the phone from being

damaged.

Always use the charger in dry place

indoor; never let the charger touch 134

any liquid during use so as to prevent

damaging the phone or even causing

explosion, fire or personal injury!

Always use the charger by the original

manufacturer so as to prevent

damaging the phone or even causing

fire or personal injury etc!

USB

Please insert the USB in switch-off status

or choose the first option Memory unit in


89/89

switch-on status, then the mobile phone

can be used as a memory body.

Never insert the USB upside-down,

because doing so can make the I/O port

short.

Never use any other USB except that from

the original manufacturer; otherwise, the

mobile phone and the USB port may be 135

damaged.

T-Flash card

It is recommended to use an eligible T-Flash

card, because the use of ineligible products may

damage the T-Flash memory card slot.

mocromax x360

Documents