mistakes

25.6.2014 Item Information Page

https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=VDS,Theme=rapport,Style=base,Language=en,Version 1/13

Item Information Page

Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of thisassessment content is prohibited.

Table of Contents

General Information Feedback Section Scoring

General Information

Assessment = ScaN OSPF Practice Skills Assessment - PTForm = English FormA ScaN OSPF Practice Skills Assessment - PT User ID = Scored Date = Wed Jun 25 13:51:08 GMT+00:00 2014

The time shown is Greenwich Mean Time (GMT). Subtract or add the appropriate number of hours to adjust to yourlocal time. If you do not know the correct number of hours to adjust to GMT, visithttp://www.timeanddate.com/worldclock/search.html.

Feedback

Based on your performance on this assessment, this table reports your preparedness for taking a hands-on skillsexam covering similar networking skills. The estimates are based on expert opinion of the knowledge and skillsneeded to successfully perform these networking tasks on a repeatable basis.

Performance Components Proficiency Estimates

None Novice Partial Proficient

ACL Configuration

Host Addressing

Basic Router Configuration

Basic Router Interface Configuration

Router Interface Addressing

OSPFv2 Activation

OSPFv2 Customization

OSPFv2 Authentication

DHCP Server Configuration

Access Port Configuration



SVI Configuration

SSH Configuration

Switch Security Configuration

VLAN creation

Access Port to VLAN Assignment

Static Trunk Port Configuration

InterVLAN Routing Configuration

Rapid PVST+ configuration

Etherchannel Configuration

You have completed all of the ACL configuration tasks.You have completed all of the host addressing tasks.You have completed all of the basic router configuration tasks.You have completed all of the basic router interface configuration tasks.You have completed all of the router interface addressing tasks.You have completed all of the OSPFv2 activation tasks.You have completed many of the OSPFv2 interface customization tasks.You have completed all of the OSPFv2 authentication configuration tasks.You have completed all of the DHCP server configuration tasks.You have completed all of the access port configuration tasks.You have completed all of the SVI configuration tasks.You have completed all of the SSH configuration tasks.You have completed some of the switch security configuration tasks.You have completed all of the VLAN creation tasks.You have completed all of the switch port to VLAN assignment tasks.You have completed some of the static trunk port configuration tasks.You have completed all of the inter-VLAN routing configuration tasks.You have completed all of the Rapid PVST+ configuration tasks.You have completed many of the EtherChannel configuration tasks.

See Terminology section for an explanation of terms.

Scoring

Total Points Possible = 100 Total Earned Points = 93

Performance Component: ACL Configuration

Description: Maximum Points = 11 Earned Points = 11

Work Product Feature Student Result Earned Points Max Points

ACL Configuration 11 11

Configure standard named ACL 2 2

Network:[[R2Name]]:ACL:TELNET-BLOCK Correct

Place Standard Named ACL 1 1



Network:[[R2Name]]:VTY Lines:0:Access Class In Correct

Configure extended ACL 3 3

Network:[[R2Name]]:ACL:101 Correct

Place extended ACL 2 2

Network:[[R2Name]]:Ports:Serial0/1/0:Access-group In Correct

Configure standard ACL 1 1

Network:[[R3Name]]:ACL:1 Correct

Place standard ACL 2 2

Network:[[R3Name]]:Ports:GigabitEthernet0/1.25:Access-group Out Correct

Performance Component: Host Addressing



Host Addressing 3 3

Configure static host addresses 2 2

Network:[[PC1Name]]:Ports:FastEthernet0:IP Address Correct

Network:[[PC1Name]]:Ports:FastEthernet0:Subnet Mask Correct

Network:[[PC1Name]]:Default Gateway Correct

Network:[[PC2Name]]:Ports:FastEthernet0:IP Address Correct

Network:[[PC2Name]]:Ports:FastEthernet0:Subnet Mask Correct

Network:[[PC2Name]]:Default Gateway Correct

Network:[[VLAN15Host1]]:Ports:FastEthernet0:IP Address Correct

Network:[[VLAN15Host1]]:Ports:FastEthernet0:Subnet Mask Correct

Network:[[VLAN15Host1]]:Default Gateway Correct

Network:[[VLAN15Host2]]:Ports:FastEthernet0:IP Address Correct

Network:[[VLAN15Host2]]:Ports:FastEthernet0:Subnet Mask Correct

Network:[[VLAN15Host2]]:Default Gateway Correct

Configure DHCP clients 1 1

Network:[[VLAN2Host1]]:Ports:FastEthernet0:DHCP client enable Correct






Performance Component: Basic Router Configuration



Basic Router Configuration 3 3

Configure global device settings 1 1

Network:[[R1Name]]:Host Name Correct

Network:[[R1Name]]:DNS:IP Domain Lookup Correct

Configure device basic global security settings 1 1

Network:[[R1Name]]:Enable Secret Correct



Network:[[R1Name]]:Service Password Encryption Correct

Network:[[R1Name]]:Banner motd Correct

Secure device access 1 1

Network:[[R1Name]]:Console Line:Login Correct

Network:[[R1Name]]:Console Line:Password Correct

Network:[[R1Name]]:Console Line:Logging Synch Correct

Network:[[R1Name]]:VTY Lines:0:Password Correct

Performance Component: Basic Router Interface Configuration



Basic Router Interface Configuration 3 3

Configure router interfaces: R1 1 1

Network:[[R1Name]]:Ports:GigabitEthernet0/0:Power Correct


Network:[[R1Name]]:Ports:Serial0/0/0:Power Correct

Network:[[R1Name]]:Ports:Serial0/0/0:Clock Rate Correct

Network:[[R1Name]]:Ports:Serial0/0/0:Description Correct

Network:[[R1Name]]:Ports:Serial0/0/0:Bandwidth Info Correct







Network:[[R2Name]]:Ports:Serial0/0/1:Clock Rate Correct









Performance Component: Router Interface Addressing



Router Interface Addressing 4 4

Address router interfaces: R1 1 1

Network:[[R1Name]]:Ports:GigabitEthernet0/0:IP Address Correct

Network:[[R1Name]]:Ports:GigabitEthernet0/0:Subnet Mask Correct

Network:[[R1Name]]:Ports:GigabitEthernet0/1:IP Address Correct

Network:[[R1Name]]:Ports:GigabitEthernet0/1:Subnet Mask Correct

Network:[[R1Name]]:Ports:Serial0/0/0:IP Address Correct



Network:[[R1Name]]:Ports:Serial0/0/0:Subnet Mask Correct











Performance Component: OSPFv2 Activation



OSPFv2 Activation 8 8

Activate OSPF: R1 2 2

Network:[[R1Name]]:OSPF:1:Networks:192.168.100.20 0.0.0.3 0 Correct












Performance Component: OSPFv2 Customization


Work Product Feature StudentResult

EarnedPoints

Max Points

OSPFv2 Customization 6 8

Configure OSPF passive interfaces 3 3

Network:[[R1Name]]:OSPF:1:Passive Interface:GigabitEthernet0/0 Correct

Network:[[R1Name]]:OSPF:1:Passive Interface:GigabitEthernet0/1 Correct

Network:[[R3Name]]:OSPF:1:Passive Interface:GigabitEthernet0/1.2 Correct



Network:[[R3Name]]:OSPF:1:PassiveInterface:GigabitEthernet0/1.15

Correct

Set OSPF interface cost values 1 1

Network:[[R1Name]]:Ports:Serial0/0/0:OSPF Cost Correct



Network:[[R2Name]]:Ports:Serial0/0/0:OSPF Cost Correct

Set OSPF router ID 2 2

Network:[[R1Name]]:OSPF:1:Router ID Correct



OSPF distribute default route 0 2

Network:[[R2Name]]:OSPF:1:Default Information Incorrect

Network:[[R2Name]]:Routes:Static RoutesV2:0.0.0.0-0-Serial0/1/0-0-1

Correct

Performance Component: OSPFv2 Authentication



OSPFv2 Authentication 6 6

Set OSPF authentication MD5 Keys 3 3

Network:[[R1Name]]:Ports:Serial0/0/0:OSPF Message Digest Key:1 Correct




Apply OSPF MD5 port authentication 3 3

Network:[[R1Name]]:Ports:Serial0/0/0:OSPF Port Autthentication Correct




Performance Component: DHCP Server Configuration



EarnedPoints

Max Points

DHCP Server Configuration 8 8

Configure DHCP pool vlan2pool 2 2

Network:[[R3Name]]:DHCP:Pools:vlan2pool:DNS Server Correct

Network:[[R3Name]]:DHCP:Pools:vlan2pool:Default Gateway Correct

Network:[[R3Name]]:DHCP:Pools:vlan2pool:Start IP address Correct

Network:[[R3Name]]:DHCP:Pools:vlan2pool:Subnet mask Correct













Configure DHCP excluded addresses 2 2

Network:[[R3Name]]:DHCP:Excluded Addresses:10.10.2.110.10.2.5

Correct


Correct


Correct

Performance Component: Access Port Configuration



Access Port Configuration 3 3

Configure access mode switchports: S1 1 1

Network:[[S1Name]]:Ports:FastEthernet0/5:Dynamic Mode Correct




Configure access mode switchports: S3 2 2

Network:[[S3Name]]:Ports:FastEthernet0/7:Power Correct








Performance Component: SVI Configuration



SVI Configuration 5 5

Configure SVI: S1 1 1

Network:[[S1Name]]:Ports:Vlan25:Power Correct

Network:[[S1Name]]:Ports:Vlan25:IP Address Correct

Network:[[S1Name]]:Ports:Vlan25:Subnet Mask Correct









Configure switch management interface default gateways 2 2

Network:[[S1Name]]:Default Gateway Correct





Performance Component: SSH Configuration



SSH Configuration 4 4

Configure SSH 2 2

Network:[[S2Name]]:DNS:IP Domain Name Correct

Network:[[S2Name]]:Security:Modulus Bits Correct

Network:[[S2Name]]:SSH Server:SSH Server Version Correct

Configure account-based access 1 1

Network:[[S2Name]]:User Names:Username Correct

Network:[[S2Name]]:VTY Lines:0:Login Correct

Configure VTY transport 1 1

Network:[[S2Name]]:VTY Lines:0:Transport Input Correct

Performance Component: Switch Security Configuration



EarnedPoints

MaxPoints

Switch Security Configuration 3 5

Configure port security 3 3

Network:[[S1Name]]:Ports:FastEthernet0/5:Port Security:Enabled Correct

Network:[[S1Name]]:Ports:FastEthernet0/5:Port Security:Violation Correct

Network:[[S1Name]]:Ports:FastEthernet0/5:Port Security:Max SecureMac

Correct

Network:[[S1Name]]:Ports:FastEthernet0/5:Port Security:StickyEnabled

Correct




Correct


Correct




Correct


Correct




Correct

Network:[[S1Name]]:Ports:FastEthernet0/24:Port Security:Sticky Correct



Enabled

Secure unused switchports 0 2


Network:[[S1Name]]:Ports:FastEthernet0/6:Access VLAN Correct
















Network:[[S1Name]]:Ports:FastEthernet0/12:Dynamic Mode Incorrect































Network:[[S1Name]]:Ports:GigabitEthernet1/1:Power Correct

Network:[[S1Name]]:Ports:GigabitEthernet1/1:Access VLAN Correct

Network:[[S1Name]]:Ports:GigabitEthernet1/1:Dynamic Mode Correct


https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=VDS,Theme=rapport,Style=base,Language=en,Versio 10/13

Network:[[S1Name]]:Ports:GigabitEthernet1/2:Power Correct

Network:[[S1Name]]:Ports:GigabitEthernet1/2:Access VLAN Correct


Performance Component: VLAN creation



VLAN creation 3 3

Create and name VLANs: S1 1 1

Network:[[S1Name]]:VLANS:2:VLAN Name Correct




















Performance Component: Access Port to VLAN Assignment



Access Port to VLAN Assignment 2 2

Assign Ports to VLANs S1 1 1





Assign Ports to VLANs S3 1 1







Performance Component: Static Trunk Port Configuration



Static Trunk Port Configuration 3 4

Configure static trunk ports: S1 0 1




















Performance Component: InterVLAN Routing Configuration



InterVLAN Routing Configuration 6 6

Configure subinterfaces and addressing 3 3

Network:[[R3Name]]:Ports:GigabitEthernet0/1.2:IP Address Correct

Network:[[R3Name]]:Ports:GigabitEthernet0/1.2:Subnet Mask Correct









Network:[[R3Name]]:Ports:GigabitEthernet0/1.2:Power Correct







Configure subinterface encapsulation 3 3

Network:[[R3Name]]:Ports:GigabitEthernet0/1.2:802.1Q:VLAN ID Correct





Performance Component: Rapid PVST+ configuration



Rapid PVST+ configuration 7 7

Activate Rapid PVST+ 1 1

Network:[[S1Name]]:STP:RSTP Correct



Configure primary/secondary root bridge: S1 2 2

Network:[[S1Name]]:STP:VLAN:2:VLAN Number Correct

Network:[[S1Name]]:STP:VLAN:2:Priority Correct







Configure primary/secondary root bridge S3 2 2









Configure PortFast 1 1

Network:[[S3Name]]:Ports:FastEthernet0/7:PortFast Correct




Configure BPDUGuard 1 1

Network:[[S3Name]]:Ports:FastEthernet0/7:Bpduguard Correct




Performance Component: Etherchannel Configuration





Etherchannel Configuration 5 7

Configure EtherChannel: S1 0 2

Network:[[S1Name]]:Ports:FastEthernet0/1:Channel Group Incorrect

Network:[[S1Name]]:Ports:FastEthernet0/1:Channel mode Incorrect

Network:[[S1Name]]:Ports:FastEthernet0/2:Channel Group Incorrect

Network:[[S1Name]]:Ports:FastEthernet0/2:Channel mode Incorrect

Network:[[S1Name]]:Ports:FastEthernet0/3:Channel Group Correct

Network:[[S1Name]]:Ports:FastEthernet0/3:Channel mode Correct





















Terminology

Performance Component - a description of what the student knows and can do about a coherent set of networkingknowledge and skills; the level at which the student's work product can be assigned a proficiency estimate.

Proficiency Estimate - a description of a student's level of mastery of the performance component. The proficiencyestimate is not meant to be a comprehensive statement of what the student knows and can do.

Work Product - student performance recorded during this assessment. For example, the submitted activity file,timing statistics, and final running configurations.

Work Product Feature - An aspect of the student's work product. The feature can have a name and a value. For example,Name = FastEthernet0/0:IP Address; Value = 192.168.1.1

Individual work product features are combined into performance components and scored based on the complexity of theperformance observed. Because the construction of performance components is based on the underlying work productfeatures as well as the unique design of each scenario, strict boundaries for determining a proficiency rating are notpossible. In general:

None - 0% to 25% of possible pointsNovice - 26% to 50% of possible pointsPartial - 51% to 85% of possible pointsProficient - 86% to 100% of possible points

mistakes

Documents