mircom uima user manual

12
UIMA USB TO RS-485/232 CONVERTOR LT-929 Rev. 3 March 2009 Windows Driver Installation Instructions

Upload: jmac-supply

Post on 15-Dec-2015

361 views

Category:

Documents


24 download

DESCRIPTION

Buy the Mircom UIMA at JMAC Supply.https://www.jmac.com/Mircom_Technologies_UIMA_p/mircom-uima.htm?=scribd

TRANSCRIPT

  • Canada 25 Interchange Way Vaughan, ON L4K 5W3 Tel: 905-660-4655 Fax: 905-660-4113

    Mircom 2002Printed in CanadaSubject to change without prior notice

    www.mircom.com

    UIMAUSB TO RS-485/232 CONVERTOR

    LT-929 Rev. 3March 2009Windows Driver Installation Instructions

    Advanced Life Safety Solutions

    U.S.A. 60 Industrial Parkway Cheektowaga, NY 14227 Tel: 1-888-660-4655 Fax: 1-888-660-4113

  • UIMA Windows Driver Installation Instructions

    1

    UIMA Windows Driver Installation Instructions

    There are two important components to installing the UIMA on your computer, Installing the USB Serial Convertor and Installing the USB Serial Port. Also included are instructions on Verifying that Windows Recognizes the USB Serial Convertor and Port. The drivers for both the USB Serial Convertor and USB Serial Port are included on the accompanying CD ROM.

    Installing the USB Serial Convertor DriverStep 1: Insert CD Driver Disk for Adapter product in the CD-ROM Drive.

    Step 2: Connect the adapter to a spare USB port on your PC, and find the new hardware wizard

    Step 3: The following screen will show Select the circled Converter Product Driver

    Step 4: Select No, not this time Click Next to continue

  • UIMA Windows Driver Installation Instructions

    2

    Step 5: Select Install from a list or specific location (Advanced) Click Next to continue

    Step 6: Select Search removable media (floppy, CD ROM)Click Next to continue

    Step 7: Auto search for the corresponding driver in the CD

  • UIMA Windows Driver Installation Instructions

    3

    Step 8: You will now see two options which are available to installChoose the USB 2.0 TO RS232 Converter driverClick Next to continue

    Step 9: The wizard has started installation and will copy the required files to your system

    Step 10: Click Finish to close the wizard

    Installing the USB Serial PortStep 11: Find new com port

  • UIMA Windows Driver Installation Instructions

    4

    Step 12: Select No, not this time Click Next to continue

    Step 13: Select Install from a list or specific location (Advanced)Click Next to continue

    Step 14: Select Search removable media (floppy, CD-ROM)Click Next to continue

    Step 15: Auto search for the corresponding driver in the CD

  • UIMA Windows Driver Installation Instructions

    5

    Step 16: Choose the correct type of the driver to match the version of Windows that your computer is using2000, XP, or Vista Click Next to continue

    Step 17: The wizard has started installation and will copy the required files to your system

    Step 18: Installation completedClick Finish to close the wizard

    Step 19: Your new hardware is installed and ready to use

  • UIMA Windows Driver Installation Instructions

    6

    Verifying that Windows Recognizes the USB Serial Convertor and Port

    Step 20: To Verify that Windows has porperly recognized your USB Serial Convertor and Port, right click My Computer and then click Properties.

    Step 21: Select Device Manager in the Hardware of the interface System Properties

    Step 22: Here you can view the hardware devices installed on your computer

  • UIMA Windows Driver Installation Instructions

    7

    Remarks

    After installation, if you can see USB Serial Converter from the Device Manager but cannot see USB Serial Port (COM X) please complete the folowing steps

    Step 24: Right click USB Serial Converter Click Properties

    Step 25: Select Load VCP in the Advanced tabClick OK

  • UIMA Windows Driver Installation Instructions

    8

    Step 26: Unplug USB TO RS232 Adapter on your computerReconnect the device to USB port on your PC againPlease refer to the following chart verify that it is installed correctly

    Step 27: Installation finished

    Congratulations, installation is successful

  • Canada 25 Interchange Way Vaughan, ON L4K 5W3 Tel: 905-660-4655 Fax: 905-660-4113

    Printed in Canada Subject to change without prior notice

    U.S.A. 4575 Witmer Industrial EstatesNiagara Falls, NY 14305Tel: 1-888-660-4655 Fax: 1-888-660-4113

    Cover - Mircom.pdfGeneric - Blank Page2.pdfLT-929 UIMA Driver Installation Instructions Rev3 new.pdfGeneric - Blank Page3.pdfBackpage - Mircom.pdf

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

    /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

    /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice