mircom mh25r data sheet

3
 PIEZOELECTRIC MINI HORNS MH-25 SERIES Description Mircom’s MH-25 Series mini horns are compact electronic alarm appliances that are ideal for alarm signalling in individual rooms, apartments, hotels and of ces where attractive appearance and dependable performance are prime concerns. When activated, the MH-25 Series mini-horns produce a high sound output of over 90 dBA at 10 feet with a minimum current draw of 15.5 milliamp s at 24 VDC (unltered) on the non silenceable models. Designed as alert or alarm signal appliances for use with any conventional Fire Alarm Control panel, the MH-Series mini horns are available in a standard version (MH-25) and a Silenceable version (MH-S25). The MH-S25 versions are silenceable mini horns equipped with a “Silence” push button and a red LED to indicate “active signal ci rcuit” when lit. The push button allows the user to silence the mini-horn for a maximum of 10 minutes upon which the mini-horn will sound again until the signal circuit is inactive or the mini horn is silenced again or the re alarm panel is reset. Upon the re alarm being reset, it takes approximately 25 seconds for the MH-S25 Mini-Horns to reset.  All MH-25 Series mini horns are designed for easy installation with convenient mounting to standard single gang boxes and in-out wire leads for fast connection . The front face plates are ruggedly constructed of high impact thermoplastic and are available in re alarm red or off-white to blend with any room decor. Features High sound output for enhanced audibility (over 90 dBA at 10 feet) @ 24VDC “Silence” push button and red LED to indicate “active signal circuit” on MH-S25 versions 24 VDC models with wide listed voltage range, ltered DC (Non Silenceable only) Polarized inputs for compatibility with standard reverse polarity supervision of circuit wiring by an alarm panel Mounts into standard single gang box Flush or surface mounting options Compatible with sensitive detection and communication circuits  Available i n red or off-w hite nish Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, speci cations and models and also to discontinue models. Note:  The MH-25 Series mini-horns are compatible with the CSIS-202 and CNSIS-204 Conventional Signal Isolator Modules. Please refer to Cat. Sheet #5223 and #5224. 5208 NOT TO BE USED FOR INSTALL ATION PURPOSES. Installation Instructions MH-2 5 Mini-Hor n MH-S25 Silenceable Mini-Horn #6-32 SCREW SINGLE GANG BOX #6-32 SCREW SINGLE GANG BOX 4 1 3 2 8 5 7 6 S5375 (MH-25R/ MH-25W) S5375 MEA approved 7135-1477:118 (MH-25R/ MH-25W) 313-97-E (MH-25R/ MH-25W) CAT AL OG NUMBER

Upload: jmac-supply

Post on 01-Nov-2015

41 views

Category:

Documents


0 download

DESCRIPTION

Buy the Mircom MH25R at JMAC Supply.https://www.jmac.com/Mircom_Technologies_MH25R_p/mircom-mh25r.htm?=scribd

TRANSCRIPT

  • PIEZOELECTRIC MINI HORNS MH-25 SERIES

    DescriptionMircoms MH-25 Series mini horns are compact electronic alarm appliances that are ideal for alarm signalling in individual rooms, apartments, hotels and offi ces where attractive appearance and dependable performance are prime concerns. When activated, the MH-25 Series mini-horns produce a high sound output of over 90 dBA at 10 feet with a minimum current draw of 15.5 milliamps at 24 VDC (unfi ltered) on the non silenceable models. Designed as alert or alarm signal appliances for use with any conventional Fire Alarm Control panel, the MH-Series mini horns are available in a standard version (MH-25) and a Silenceable version (MH-S25).

    The MH-S25 versions are silenceable mini horns equipped with a Silence push button and a red LED to indicate active signal circuit when lit. The push button allows the user to silence the mini-horn for a maximum of 10 minutes upon which the mini-horn will sound again until the signal circuit is inactive or the mini horn is silenced again or the fi re alarm panel is reset. Upon the fi re alarm being reset, it takes approximately 25 seconds for the MH-S25 Mini-Horns to reset.

    All MH-25 Series mini horns are designed for easy installation with convenient mounting to standard single gang boxes and in-out wire leads for fast connection. The front face plates are ruggedly constructed of high impact thermoplastic and are available in fi re alarm red or off-white to blend with any room decor.

    Features

    High sound output for enhanced audibility (over 90 dBA at 10 feet) @ 24VDCSilence push button and red LED to indicate active signal circuit on MH-S25 versions24 VDC models with wide listed voltage range, fi ltered DC (Non Silenceable only)Polarized inputs for compatibility with standard reverse polarity supervision of circuit wiring by an alarm panelMounts into standard single gang box Flush or surface mounting options Compatible with sensitive detection and communication circuitsAvailable in red or off-white fi nish

    Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifi cations and models and also to discontinue models.

    Note: The MH-25 Series mini-horns are compatible with the CSIS-202 and CNSIS-204 Conventional Signal Isolator Modules. Please refer to Cat. Sheet #5223 and #5224.

    5208NOT TO BE USED FOR INSTALLATION PURPOSES.

    Installation InstructionsMH-25 Mini-Horn

    MH-S25 Silenceable Mini-Horn

    #6-32SCREW

    SINGLE GANGBOX

    #6-32SCREW

    SINGLE GANGBOX

    4

    1

    3

    2 8

    5

    7

    6

    S5375(MH-25R/MH-25W)

    S5375

    MEAapproved

    7135-1477:118(MH-25R/MH-25W)

    313-97-E(MH-25R/MH-25W)

    CATALOG NUMBER

  • Ordering InformationModel Description Colour Approval Listings MH-25R Mini-Piezo Red UL, ULC, CSFM, MEA MH-25W Mini-Piezo White UL, ULC, CSFM, MEA MH-S25RA Silenceable Mini-Piezo Red ULCMH-S25WA Silenceable Mini-Piezo White ULC

    Canada25 Interchange WayVaughan, Ontario L4K 5W3Telephone: (905) 660-4655Fax: (905) 660-4113

    Web page: http://www.mircom.com Email: [email protected]

    Distributed by:

    CAT. 5208Rev. 5

    Typical Wiring Diagrams

    Operating Temperature -4F to 140F (-20C to 60 C)Weight2.2oz (63g)Colour SelectionRed/WhitePlateA.B.S.Silencing Time (MH-S25 only)9 to 10 mintues

    NOT TO BE USED FOR INSTALLATION PURPOSES.

    Specifi cationsMH-25R/MH-25W MH-S25R/MH-S25W

    MH-S25 Silenceable Mini-Horn

    MH-25 Mini-Horn

    Note: Sound level in an indoor installation may vary depending upon the space surroundings.

    4.49in.(114mm)

    1.1.in.(28 mm)

    0.16" DIA.(4mm)

    "FIRE"STICKER

    2.73in.(69.2mm)

    3.29in.(83.5mm)

    DO NOT PAINTFIRE ALARM DEVICE

    DO NOT PAINTFIRE ALARM DEVICE

    FIRE ALARM PANEL

    CONNECT TOALARM OUTPUT

    Use both leads for connection.Break wire run to provide electrical supervision.

    RED

    BLACK TO NEXTMH-25, BELL

    OR E.L.R.(END OF LINE RESISTOR)

    4.49in.(114mm)

    1.37 in.(35 mm)

    0.16" DIA.(4mm)

    "FIRE"STICKER

    2.73in.(69.2m

    3.29in.(83.5mm)

    PRESSTOSILENCE

    DO NOT PAINTFIRE ALARM DEVICE

    DO NOT PAINTFIRE ALARM DEVICE

    FIRE ALARM PANEL

    CONNECT TOALARM OUTPUT

    RED (+)

    BLACK (-)

    RED (+)

    BLACK (-)TO NEXT

    MH-S25, BELLOR E.L.R.

    (END OF LINE RESISTOR)

    U.S.A.4575 Witmer Industrial EstatesNiagara Falls, NY 14305Toll Free: (888) 660-4655Fax Toll Free: (888) 660-4113

    Rated Voltage 10-28VDC

    Operating Voltage (V) 10 12 24 28

    Current(mA) 5 6 17 27

    Sound Level (dB) 85 87 91 95

    Rated Voltage

    24-28VDC (Filtered or unfi ltered (full-wave rectifi ed))

    RatedCurrent 30 mA

    Sound Level (dB)

    Operating Voltage (V) 24 28

    Indoor Measurement (dB @ 10 ft)

    90 90