minor project synopsis format

Trinity Institute of Technology & Research, Bhopal (M.P.)

Format for B.Tech Project Synopsis Title page:

1. Name of Student

2. RGPV Roll No.

3. Branch

4. Batch

5. Proposed Topic

Introduction (should not exceed 3 pages)

The introduction part will include the brief introduction about the project to be

developed, technology used, field of project (if specialized one), any special technical

terms about the project.

Literature Survey (at least 4 page)

The literature survey is the main part of your synopsis so you have to write with proper

citation (references may be any website, any tutorial site, any books or any research paper

etc)

Feasibility Study: (should not exceed 1 page)

Feasibility study of the project that include the feasibility, need and significance

of the project

Methodology/ Planning of work (should not exceed 1 page)

Methodology will include the steps to be followed to achieve the objective of the

project during the project development.

Facilities required for proposed work

Instruments required for the development of the project.

Bibliography Here specify the description of the study material referred for the development of the project.

SPECIFICATIONS FOR SYNOPSIS

1. The synopsis shall be computer typed (English- British, Font –Times

New Roman, Size-12 point) and printed on A4 size paper.

2. The Synopsis shall be typed on one side only with double space with a

margin 3.5 cm on the left, 2.5 cm on the top, and 1.25 cm on the right

and at bottom.

3. In the synopsis, the title page [Refer sample sheet (inner cover)]

should be given first. This should be followed by Declaration,

Certificate, Certificate of Approval, Acknowledgement, List of

Figure, List of Tables, Abstract, Table of Contents then Introduction

and so on as mentioned above.

4. The diagrams should be printed on a light/white background; Tabular

matter should be clearly arranged. Decimal point may be indicated by

full stop (.)The caption for Figure must be given at the BOTTOM of

the Fig. and Caption for the Table must be given at the TOP of the

Table.

5. Students can change acknowledgement accordingly

Guide NameAssistant Professor

Department of CSE, TITR- Bhopal (M.P.)

Title of ProjectA

Minor Project SynopsisFor the award of

Bachelor of Engineeringin

Computer Science and EngineeringSubmitted to

Rajiv Gandhi Proudyogiki VishwavidyalayaBhopal, (M.P.), India

ByStudent 1 Name

(Enrollment No. 0101CS1112)

Student 2 Name(Enrollment No. 0101CS112)

Trinity Institute of Technology & ResearchBhopal, (M.P.), India

Under The Supervision of

Year - 2015

Trinity Institute of Technology & Research

DECLARATION

I declare that the Project entitled “Project Title” is my own work conducted under the

supervision of guide name Assistant Professor, Trinity Institute of Technology &

Research Bhopal (M.P.), I have put in more than the required days of attendance with the

Supervisors at the TITR.

I further declare that, to the best of my knowledge, the project work does not contain the

work which has been submitted for the award of the degree either in the University or in

any other University/Deemed University.

Dated:

Student 1 Name


Student 2 Name


HOD NameAssistant Professor

Department ofComputer Science & Engineering






CERTIFICATE

This is to certify that the work entitled “Project Title” is a piece of project work done by

Mr. ______ under our guidance and supervision for the degree of Bachelor of

Engineering of Rajiv Gandhi Proudyogiki Vishwavidyalaya Bhopal, (M.P.) India. The

candidate has put in the required attendance with me. To the best of my knowledge.

Dated:

Forwarded by




HOD NameAssistant Professor



PrincipalTrinity Institute of Technology & Research,

Bhopal (M.P.)


CERTIFICATE OF APPROVAL

The project entitled “Project Title” being submitted by Students name (0101CS1007)

has been examined by us and is hereby approved for the award of degree “BACHELOR

OF ENGINEERING” (Computer Science and Engineering), for which it has been

submitted. It is understood that by this approval the undersigned do not necessarily

endorse or approve any statement made, opinion expressed or conclusion drawn therein,

but approve the research work only for the purpose for which it has been submitted.

1. (Internal Examiner) (External Examiner)

2. (Internal Examiner)

Date: Date:

ACKNOWLEDGEMENT

I wish to express my deepest sense to gratitude for immeasurably valuable guidance and

support I have received from my Supervisors Guide Name without their inspiration,

efforts, and top notch advices this project would not have been possible. Their meticulous

approach has improved the precision and clarity of my writing.

I am grateful to my source of inspiration, HOD Name, Head of CSE, TITR, Bhopal, for

his unforgettable support and inspiration towards the project ethics and morality. The

principles that I have learned from him always provide an exponential inspiration for my

journey in this life. I am very grateful to Principal Name, Principal, TITR, Bhopal for

providing me support and facilities needed to accomplish the work.

I am indebted to all my colleagues for motivating and providing an enjoyable

environment conducive to learn and grow.

I express my deep gratitude to my family for the love, inspiration and moral support.

- Students Name

TABLE OF CONTENTS

TITLE PAGE NO.

List of Figures...………………………………………………………... (i)

List of Tables ………………………………………………………... (ii)

Abbreviations…………………………………………………………. (iii)

Abstract

1. Introduction 1

1.1. Objective

2. Technology Required

2.1. Hardware & Software Requirement

2.2. Technology Features

3. Literature Survey

4. SDLC

4.1. SDLC Model

4.2. Feasibility Study

5. Proposed Work

5.1. Plan of Actions

6. Methodology Used

7. Work Status

8. Bibliography

4

5

7

9

10

15

16

19

20

24

27

30

33

35

minor project synopsis format

Documents