mini fans minivent m1/100 · 2017. 1. 12. · 3) with manual operation. 4) limit value 60, 70, 80,...

22

� Features

� Lowest power consumption ofonly 5 Watt at vol. = 75 m³/h.

� Extremely quiet due to theultraSilence® technology;just 25 dB(A)* at vol. = 75 m³/h.

� Pressure capacity: 60 m³/h airflow rate at 31 Pa resistance.90 m³/h free discharge,DP max. 45 Pa.

� Where space is limited the guidevane of M1/100 can be simplyremoved. Thus reducing the in-stallation depth to 52 from 96mm.

� Compact dimensions for flushmounted installation in walls,shafts or ceilings with nominaldia. 100 mm.

� Mini fans of highest quality.Design and performance ofthe MiniVent® M1/100 sets thestandard for the mini fansrange.

The excellent design of theMiniVent® M1/100 blends ineverywhere beautifully. Thecompact and attractively de-signed facia shields the viewof the fan interior completely.

All M1/100 models are sup-plied with 2 speeds and withairtight back draught shutteras standard.

The noise level is extremelylow due to Helios ultraSilence®technology.

Available with interval func-tion, overrun timer or auto-matic function like motionsensor or humidity controlledoperation. This responds withintelligent electronics and pre-vents development of mildeweffectively.

Suitable for all ventilationapplications in bathrooms,toilets and other small rooms.

� All components made from highquality white polymers.

� The motor design and ball bear-ings are selected for long-termdurability, steady performanceand lifelong operational reliability.

� Motor supplied with thermaloverload protection, providingmaintenance and trouble-free,continuous operation.

� Suitable for use in zone 1 ofbathrooms according to DINVDE 0100-701.

� The electrical supply cables tothe unit may be recessed orsurface mounted.

� Practical quick assembly usingthe push on cable connectorsfor the electrical connection.

1) All electronic functions optionally on high or low speed - adjustable. 2) Freefield conditions. 3) With manual operation.4) Limit value 60, 70, 80, 90% adjustable.

All dim. in mm

M1/100

DpfaPa

r = 1,20 kg/m3M1/100 Performance curve

high speed

lowspeed

Sound pressure level dB(A) in 3 m 2) 30 / 25 30 / 25 30 / 25 30 / 25

Type M1/100 M1/100 N/C M1/100 F M1/100 P

Ref. no. 6171 6172 6175 6174

Model Standard model As M1/100, As M1/100, with As M1/100,equipped with with adjustable automatic humidity with PRI

two speeds overrun and control1) 4) motion sensor1)

interval timer1)

Run on time, min. — 6, 10 15, 21 6, 12 18, 24 6 optionally on high or low speed adjustable adjustable3)

Interval operation, hrs. — 0, 8, 12, 24 — — optionally on high or low speed adjustable

Air flow volume (FID) m³/h 90 / 75 90 / 75 90 / 75 90 / 75

Impeller Ø mm 92 92 92 92

R.P.M. min-1 2650 / 2250 2650 / 2250 2650 / 2250 2650 / 2250

Delayed start, approx. sec. — 0, 45, 90, 120 0 or 453) —

Power consumption W 9 / 5 9 / 5 9 / 5 9 / 5

Back draught shutter, mech., remov. Yes Yes Yes Yes

Voltage/Frequency 50 Hz 230 V 230 V 230 V 230 V

Rated current A 0.06 / 0.04 0.06 / 0.04 0.06 / 0.04 0.06 / 0.04

Weight approx. kg 0,80 0,80 0,80 0,80

Wiring diagram no. 915 917 919 918

Protection cat. II, protection IP 45 IP 45 IP 45 IP 45

Electrical power supply NYM-O in mm2 3 x 1,5 4 x 1,5 4 x 1,5 3 x 1,5

Max. air flow temperature +40 °C +40 °C +40 °C +40 °C

Mini fansMiniVent® M1/100

V· (m3/h)

23

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onAir intakes 512 on

Dim. in mm

� Nice and cleanSince every fan gets dirty sooneror later, the M1 facia was de-signed in a way that air flows inon all sides. The design of thefacia elegantly avoids the inter-nal view of the fan opening,even when dirty.M1 blends harmoniously intoany environment. The smooth-surfaced facade always remainseasy to maintain and clean.

� Intelligent humidity controlThe humidity control of theM1/100 F starts the fan auto-matically with increase of humid-ity. The fan operates until thehumidity is reduced below theset point. With constantly highhumidity the fan changes into adefined interval operation.

� Connected at lightning speedA generously dimensioned, cir-cular cable storage space, thesimple rotatabilty of the casingand the push on cable connec-tors assist the electrical connec-tion enormously.Ball bearings (approx. 40 000hours running) allow the installa-tion in any position, also directlyin the ceiling.

� Flexible installation depthRemovable guide vane reducesinstallation depth from 96 to52 mm. Can be installed with orwithout back draught shutter.

� Suitable for use in zone 1MiniVent® M1/100 provides pro-tection to IP 45, insulation classII and may be used in accor-dance with DIN VDE 0100-701in zone 1 bathrooms.

Wall mounting kitType WES 100 Ref. no. 0717Two telescopic polymer sleevesguide the air through cavity wallsand serve as wall liners.Outside wall termination possiblein two ways:a) Three bladed automatic backdraught louvre shutter.b) Fixed grille. All parts made ofhigh quality polymer.

Telescopic wall sleeveType TWH 100 Ref. no. 6352As WES, however without backdraught louvre shutter and grille.

Operation switch 0-1-2for standard modelType MVB Ref. no. 6091Two speed and on/off switch.Current 3 A (ind.) Voltage 230 V, 1~, 50/60 HzProtection to IP 30Installation in standard gang boxesDimensions mm W 80 x H 80 x D 15Weight approx. 0.1 kg

Mounting plateMBR 90/160/300 Ref. no. 0281Made from high quality, impactresistant polymer. Colour: white.Ideal for refurbishment of oldhousing. Easy installation of allM1-models in existing rectangularshaft openings. To make the platealmost invisible it can be paintedor wallpapered.

Spacer frameType MF 100 Ref. no. 6188To reduce the installation depth inthin walls, narrow duct and tight90° bends. Also suitable for theassembly of a pull cord switch(accessories). More MF 100 canbe put on top of each other, ifnecessary.

276

136

t = 3

Ø4,5 ± 0,1

� 91

Ø110 260

– 500

15

�140

Dim. in mm

Ø110 260

– 500

Dim. in mm

� 14020

Dim. in mm

MiniVent® M1/100Accessories

Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

Installation in zone 1 allowed(according to DIN VDE 0100-701).

zone 0

zone 1zone 2

24

DpfaPa

� Features





� Compact dimensions for flushmounted installation in walls,shafts or ceilings with nominaldia. 120/125 mm.



All M1/120 models are sup-plied with 2 speeds and withairtight back draught shutteras standard.


Available with interval func-tion, overrun timer or auto-matic function like motionsensor or humidity controlledoperation. This responds withintelligent electronics and pre-vents development of mildeweffectively.

Suitable for the ventilation ofsmall to medium-sized roomsin private, commercial and in-dustrial areas.






� The electrical supply cables tothe unit may be recessed orsurface mounted.


high speed

lowspeed

1) All electronic functions optionally on high or low speed - adjustable. 2) Freefield conditions. 3) With manual operation.4) Limit value 60, 70, 80, 90% adjustable.

All dim. in mm

M1/120

Sound pressure level dB(A) in 3 m 2) 36 / 32 36 / 32 36 / 32 36 / 32

Type M1/120 M1/120 N/C M1/120 F M1/120 P

Ref. no. 6360 6361 6364 6363

Model Standard model As M1/120, As M1/120, with As M1/120,equipped with with adjustable automatic humidity with PIR

two speeds overrun and control1) 4) motion sensor1)

interval timer1)

Run on time, min. — 6, 10 15, 21 6, 12 18, 24 6 optionally on high or low speed adjustable adjustable 3)

Interval operation, hrs. — 0, 8, 12, 24 — — optionally on high or low speed adjustable

Air flow volume (FID) m³/h 170 / 150 170 / 150 170 / 150 170 / 150

Impeller Ø mm 111 111 111 111

R.P.M. min-1 2350 / 2050 2350 / 2050 2350 / 2050 2350 / 2050

Delayed start, approx. sec. — 0, 45, 90, 120 0 or 45 3) —

Power consumption W 13 / 10 13 / 10 13 / 10 13 / 10

Back draught shutter, mech., remov. Yes Yes Yes Yes

Voltage/Frequency 50 Hz 230 V 230 V 230 V 230 V

Rated current A 0,09 / 0,08 0,09 / 0,08 0,09 / 0,08 0,09 / 0,08

Weight approx. kg 1,05 1.05 1.05 1.05


Protection cat. II, protection IP 45 IP 45 IP 45 IP 45

Electrical power supply NYM-O in mm2 3 x 1.5 4 x 1.5 4 x 1.5 3 x 1.5



V· (m3/h)

25

Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onAir intakes 512 on




� Flexible installation depthRemovable guide vane reducesinstallation depth from 116 to70 mm. Can be installed with orwithout back draught shutter.


Wall mounting kitType WES 120 Ref. no. 0486Two telescopic polymer sleevesguide the air through cavity wallsand serve as wall liners. Outsidewall termination is carried out byapplication of three bladed auto-matic back draught louvre shutter.

Telescopic wall sleeveType TWH 120 Ref. no. 6353As WES, however without backdraught louvre shutter.


� 110

Ø130 260

– 500

20

�160

Dim. in mm

Ø130 260

– 500

Dim. in mm



zone 0

zone 1zone 2

26


DpfaPa

� Features





� Compact dimensions for flushmounted installation in walls,shafts or ceilings with nominaldia. 150/160 mm.



All M1/150 models are sup-plied with highly efficient ECmotor technology, with 2speeds and with airtight backdraught shutter as standard.


stepless speed regulation.This responds with intelligentelectronics and prevents de-velopment of mildew effec-tively.Suitable for the ventilation ofsmall to medium-sized roomsin private, commercial and in-dustrial areas.






� The electrical supply cables tothe unit may be recessed or sur-face mounted.


� The 0-10 V Type has variousapplications due to the combi-nation with CO2, VOC or tem-perature sensors. Furthermore,the min./max. speed is fully ad-justable and stepless regulationis possible with a potentiometer.The unit can also be controlledwith the three-step switch orsteplessly via universal controlsystems or electronic differentialpressure / temperature con-trollers.A potential-free relay output isavailable as standard for theconnection of an electricalcover flap.

high speed

All dim. in mm

M1/150

V· (m3/h)

*

* low speedExample speeds 0-10 VType for stepless regulation

Type M1/150 M1/150 N/C M1/150 F M1/150 0-10 V

Ref. no. 6041 6042 6043 6044

Model Standard model As M1/150, As M1/150, with Steplessequipped with with adjustable automatic humidity control

two speeds overrun and control1) 4)

Interval timer1)

Run on time, min. — 6, 10, 15, 21 6, 10, 15, 21 6optionally on high, low or both speeds adjustable adjustable3)

Interval operation, hrs. — 0, 8, 12, 24 — —optionally on high, low or both speeds adjustable

Delayed start, approx. sec. — 0, 45, 90, 120 0, 45, 90, 1203) —

Internal shutter, removable Yes Yes Yes Yes

Air flow volume m3/h free discharge 260 / 220 260 / 220 260 / 220 260-50

Impeller Ø mm 137 137 137 137

R.P.M. min-1 1900 / 1600 1900 / 1600 1900 / 1600 1900-980

Voltage / Frequency 50 Hz 230 V 230 V 230 V 230 V

Power consumption W 8 / 4.5 8 / 5 9 / 6 9 / min. 3.5

Rated current A 0,08 / 0,06 0,10 / 0,09 0,08 / 0,06 0,08 / min. 0,035

Sound pressure level dB(A) in 3 m2) 39 / 35 39 / 35 39 / 35 max. 39


Electrical power supply NYM-O in mm2 3 x 1.5 4 x 1.5 4 x 1.5 2 x 1.55)

Elec. power supply (control) LiYY in mm2 — — — 3 x 0.34

Protection cat. II, protection class IP 45 IP 45 IP 45 IP 45


Weight approx. kg 1.20 1.20 1.20 1.201) All adjustable times and electronic functions optionally on high, low or both speeds - adjustable. 2) Free field conditions.3) With manual operation. 4) Limit value from 40-90% steplessly adjustable. 5) Additional connection cable provided for relay output.

27


Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onAir intakes 512 onUniversal control system,speed-potentiometer 539 on




� Flexible installation depthRemovable guide vane reducesinstallation depth from 142 to76 mm. Can be installed withor without back draught shutter.


Wall mounting kitType WES 150 Ref. no. 0537Two telescopic polymer sleevesguide the air through cavity wallsand serve as wall liners.Outside wall termination possiblein two ways:a) Three bladed automatic backdraught louvre shutter.b) Fixed grille. All parts made ofhigh quality polymer.



Operation switch forM1/150 N/C and M1/150 FType DSEL 2 Ref. no. 1306Two speed and on/off switch.Current 3 A (ind.) Voltage 230 V, 1~, 50/60 HzProtection to IP 30Installation in standard gang boxesDimensions mm W 80 x H 80 x D 15Weight approx. 0.1 kg

Speed-potentiometerfor M1/150 0-10 VOn/off switch,stepless speed control.Type PU 10 Ref. no. 1734For flush mounting.Installation in Standard UP-DoseDim. mm W 80 x H 80 x D 21 protr.Type PA 10 Ref. no. 1735For surface mounting.Casing Surface installationDim. mm W 80 x H 80 x D 65

Dim. in mm

Ø155 260

– 500

� 130

Ø155 260

– 500

25

�190

Dim. in mm


zone 0

zone 1zone 2

28

All dim. in mm

Type HR 90 KE HR 90 KEZ

Ref. no. 0334 0335

Built-in overrun timer1), Overrun timer approx. 2-8 min. ja2)

Air flow volume (FID) m3/h 3) 95 95

Impeller Ø mm 93 93

Power consumption W 17 20

Current A 0,12 0,14

Sound pressure level dB(A) in 1 m 44 44

R.P.M. min-1 2550 2550

Protection class II, protection IP 45 IP 45

Voltage/Frequency 50/60 Hz 230 V 230 V

Wiring diagram no. 483 484

Max. air flow temperature +40 °C +40 °C

Electric shutter ja ja

Weight approx. kg 0,60 0,621) delayed start of approximately 1 minute 2) NYM-O 3 x 1.5 mm2 required 3) determined with extract duct, Length 2 x D

� Advantages of ball bearings

� Quiet and reliable performanceunder continuous operation.

� Acoustically tested long life ballbearings are greased for life (ap-prox. 30 000 hours running).Maintenance, re-greasing andcleaning of bearings are not re-quired, saving time and money.

� Even under harshest conditions,longlife ball bearings ensure thatthe fans will perform quietly forlife.

� Ball bearings and motor are de-signed for long-term durability,constant performance and life-long operational safety.


� Flush mounting in Ø 100 mmducting or shafts.

� High-quality mini fan withelectric shutter.The shutter blades behind thefacade open and close noise-lessly and automatically whenthe fan is switched on/off.This ensures the vibration-freeconnection for outside airwhen the ventilator is at astandstill. The long-life ballbearings ensure maintenance-free, silent operation and al-low installation in any posi-tion.

Unobtrusive, HR 90 KE blendsinto every room ambience.The upward-facing bladesshield the view of the fan inte-rior. Suitable for all ventilationapplications in bathrooms,toilets and other small rooms.

HR 90 KE

DpfaPa

V· (m3/h)

r = 1,20 kg/m3Performance curve3)

� Can be used practically any-where due to small installationdepth and small dimensions.

� Attractive Soft-Line Design inpleasant white.

� All components made from im-pact resistant polymers.

� Contact safety to DIN EN ISO13857.

� Motor protected by automatical-ly resetting thermal contact.Maintenance-free and interfer-ence-free. Suitable for continu-ous operation.

� Cable entry can be flush or onthe surface.

� Easy electrical connectionthrough screwless clamps.

� Spring clips for fixing into Ø 100mm ducting or screw fixing inlarger openings.

� NoteHR 90 K 12 V –with safety extra-low voltage

upon request

Mini fansHelioVent® HR 90 KE

29

Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

Dim. in mm

Dim. in mm

Ø103

�140

12 – 38

� Mini fan HR 90 KEfor ceiling installationFans with ball bearings are ide-ally suited for ceiling installation.Spacer frame MF 90 (accessory)prevents condensation fromducting entering the fan.

� Screwless installationHR 90 KE fans have screwlessclamps for electrical connection.The fascia is fixed quickly andeasily through a click in mecha-nism. Spring clips on the sidessimplify installation into Ø 100mm ductings.

� Suitable for use in zone 1HR 90 KE models provideprotection to IP X5 and maybe used in accordance withDIN VDE 0100-701 in zone 1of bathrooms.

� Installation in any positionHR 90 KE is equipped with elec-tric shutter and high quality longlife ball bearings. This ensures awall and ceiling installation in anyposition – vertical, horizontal orany position in between.

� Approvals

Wall mounting kitType WES 90 Ref. no. 0717Two telescopic sleeves guide airthrough cavity walls and serve aswall liners; for flush mountedinstallation.There are two possibilities for walltermination:a) Three bladed automaticbackdraught shutter.

b) Fixed grille. All partsfrom high-quality polymer.


Window kitType FES 90 Ref. no. 0462For installation of HR 90 KE modelsare suitable for single and doubleglazed windows as well as panelsfrom 1 mm up to 40 mm thick.Outside cover only 29 mm throughflat rain repellent grille. Pull cordoperation.

Mounting plateMBR 90/160/300 Ref. no. 0281From high quality, impact resistantpolymer. Colour: white. Ideal forrefurbishment of old housing.Easy installation of HR 90 KEmodels in existing rectangularshaft openings. To make the plateinvisible it can be painted or wall-papered.

Spacer frameType MF 90 Ref. no. 0819Areas of application:1. Required for ceiling installation.MF prevents condensationentering the fan from verticalductings.

2. For easy installation of awkward-ly placed electrical cables, be-cause the fan will be lifted about23 mm from the wall.

3. For easy installation of the fanin tight shafts. MF reduces fanspigot protrusion e.g. tight 90°bends.

4. For installation in thin walls thefan spigot protrusion can bereduced as follows:With 1 spacer frame to 35 mm.With 2 spacer frames to 7 mm.

Colour: alpine white.

Dim. in mm

Dim. in mm

276

136

t = 3

Ø4,5 ± 0,1

� 146,5

22,5

27,5

� 91

Ø110 260

– 500

15

�140

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onAir intakes 512 onSpeed controllers, switchesand overrun timer 525 on

Dim. in mm

Ø110 260

– 500

Mini fans HR 90 KEAccessories


zone 0

zone 1zone 2

30

� The HelioVent® fans are de-signed to ventilate smaller tomid-sized domestic, commer-cial and industrial rooms.

� The fan with ball bearings asstandard guarantees

� Installation in any position.� Quiet and reliable performanceunder continuous operation.

� Silent and maintenance free forlife.

� Features� Front grille can be removed andeasily cleaned in soapy water.

� Small depth avoids possible in-stallation difficulties.

� Suitable for wall, window andceiling installation in any posi-tion.

� Adjustment of flow volumethrough stepless, electronicspeed control.

� Motor protection through built-inthermal contacts.

� SpecificationThe traditional design blendswell in any room. All parts, in-cluding fan casing and impellerare made from high quality poly-mer. White facia. Built-in neonlight indicates operation. Highvolume and pressure character-istic using a 8 bladed impellerand guide vanes.Totally enclosed, maintenancefree running low noise ball bear-ing motor, sealed for life, interfer-ence-free, suitable for continu-ous operation. Installation in anyposition. Contact safety to DINEN ISO 13857.The electrical supply cables tothe unit may be recessed or sur-face mounted.

All dim. in mm

Window mounting kitType FES 150 Ref. no. 0463For installation with all models,preferably models with electricalinternal shutter. Suitable for singleand double glazed windows aswell as thin walls and panels.Wall termination through flat rainrepellent grille with fixed blades.Controllable with pull cord sup-plied, or by a remote switch, tobe installed on site.

Wall mounting kitType WES 150 Ref. no. 0537For flush mounted wall installation;contents: Two telescopic polymersleeves adjustable on wall thick-ness and wall termination that caneither be mounted with a gravityshutter or on the HVR E modelswith a rain repellent grille. Suppliedwith both elements as standard.


HVR 150

DpfaPa

V· (m3/h)

r = 1,20 kg/m3

Ø178

�190

24 – 52

Dim. in mm

Dim. in mm

� 130

Ø155 260 – 5

00

25

�190

� Accessory details PageRoof outletsand grilles 487 onAir intake 512 onSpeed controllers, switchesand overrun timer 525 on

HelioVent® HVR 150Flush mounted-wall and window fan

Type HVR 150/4 E HVR 150/2 E HVR 150/2 RE

Ref. no. 0283 0285 0286

Built-in electric shutter Yes Yes Yes

Air flow reversible — — DSEL 21) Ref. no. 1306

Air flow volume (FID) m3/h 180 260 360

Impeller Ø mm 140 140 140

R.P.M. min-1 ca. 1300 1800 2600

Voltage/Frequency 230 V~ / 50 Hz 230 V~ / 50 Hz 230 V~ / 50 Hz

Power consumption W 30 35 50

Current A 0.20 0.15 0.25

Sound pressure level dB(A) in 1 m 46 58 64

Wiring diagram no. 283 283 284.1

Protection class II, protection to IP 44 IP 44 IP 44

Max. air flow temperature +40 °C +40 °C +40 °C

Weight approx. kg 1.2 1.4 1.51) NYM-O 3 x 1.5 mm2 cable required for reverse operation

31

Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

Sound power dB(A) 60 63

Air flow reversible Yes Yes

� Installation – ConnectionThe installation is simple anddone within minutes. Easy elec-trical connection through well-tried screwless clamps and largecable storage reduce effort to aminimum. Cable can be insertedflush or on the surface.

� Speed controlSpeed controllable from0 – 100% through voltagereduction with an electronicor transformer controller. Installation in thin panels

Adaptor plate (accessory)F 200 Ref. no. 0804F 250 Ref. no. 0805

ShutterVK = automatic

ventilationEVK = electrical

ventilationGVK = automatic

ventilation

Installation in wall or ceiling

Accessory WER telescopic to 500 mm

220/270 mm

1) NYM-J 4 x 1.5 mm2 required for reverse operation

Type HV 200/4 R HV 250/4 R

Ref. no. 0957 0958

Air flow volume (FID) m3/h 450 840

Impeller Ø mm 200 250

Power consumption W 30 40

Current A 0.13 0.20

Sound pressure level dB(A) bei 15 Pa in 1 m (freefield conditions) 52 55

R.P.M. min-1 1360 1380

Protection to IP 54 IP 54

Voltage/Frequency 230 V~ / 50 Hz 230 V~ / 50 Hz

Wiring diagram no. 439 439

Max. air flow temperature +40 °C +40 °C

Weight approx. kg 2.1 2.6

Wall sleeve Type WER 200 WER 250/225 for flush mounted wall installation Ref. no. 0368 0369

Air stream operated shutter Type VK 200 VK 250 for extraction only Ref. no. 0758 0759

Twin swing shutter Type GVK 200 GVK 250 ventilation and extraction Ref. no. 0370 0371

Reversing switch Type DSEL 21) DSEL 21)

ventilation and extraction Ref. no. 1306 1306

Reversing speed controller Type BSX BSX for stepless variable speed Ref. no. 0240 0240

Electronic speed controller Type ESA 1 ESA 1 Surface mounting Ref. no. 0238 0238

Electronic speed controller Type ESU 1 ESU 1 Flush mounting Ref. no. 0236 0236

Accessories Specification Fan type HV 200 HV 250

� HelioVent®. The traditionaldesign blends well in anystylish room: In living anddining room, in offices andconference rooms, restaurantsor foyers.Universal in operation.Reversible for ventilation andextraction. Installation in wall,ceiling or any angle.

� HelioVent® at a glanceCompact, quiet fan unit withclever design features:

� HelioVent® matches every loca-tion inconspicuously.

� No view of the fan interior if itgets dirty.

� High air flow and low air noisethrough low resistances.

� Easy to care for. Facia is remov-able with one hand to becleaned easily in soapy water.

� Specification� Facia and fan casing from highquality, impact resistant alpinewhite polymer.

� Totally enclosed, powerful motorwith high efficiency. Corrosion-resistant in an aluminium diecastcasing, protected against dustand water (protection to IP 54).With tropical protection of wind-ings and insulation to ISO classB.

� Overload protection throughbuilt-in thermal contacts (selfresetting).

� Noise resistant ball bearingsensure quiet operation.

� Large terminals (protection toIP 55) and extra cable storagemake installation easier

� Impeller specifically designed forhigh performance with high effi-ciency and quiet operation.

� Maintenance free and interfer-ence-free.

� Contact safety to DIN EN ISO13857 through facia.

� Easy installation and service.

�287

* �337

39 80

*39*80

207*257

Dim. in mm for HV 200, *HV 250

HV 200 and HV 250

DpfaPa

V· (m3/h)

r = 1,20 kg/m3

� Accessory details PageRoof outletsand grilles 487 onAir intakes 512 onSpeed controllers, switchesand overrun timer 525 on

HelioVent® HV 200/250Flush mounted wall fan

32

DX 200

DX 200

DpfaPa

� Specification� User friendly controls allow theunit to meet individual require-ments for room conditions.

� Easy installation in any position.Flush installation possible by re-moving the outer casing.

� Exhaust spigot suitable for con-nection to Ø 100 mm ducting.

� Easily removable front for clean-ing and maintenance.

� With integrated backdraughtshutter.

� Maintenance free motor withthermal overload protection.

� Attractive design with theconcealed intake openingcharacterises the universalmodels DX.

This range is powerful, easy toinstall and suitable for ventila-tion of rooms in both privateand commercial applications.

Dim. in mm

V· (m3/h)

r = 1,20 kg/m3

Technical data

Type DX 200

Ref. no. 1703

Operation Stepless through electronic actuator ESU 1 / ESA 1, Ref. no. 0236 / 0238.Two speed operation possible using operation switch MVB, Ref. no. 6091.

Air flow volume on level � � free discharge m3/h 1) 120 60

R.P.M. min-1 2660

Voltage/Frequency 230 V~ / 50 Hz

Power consumption W 33

Current A 0.24

Sound pressure level in 1 m dB(A) 1) 55 42

Wiring diagram no. 693.1

Protection class IP X5

Maximum air flow temperature +40 °C

Weight approx. kg 1.71) values depend on different speed levels.

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onIntake air elements 512 onSpeed controllers, switchesand overrun timers 525 on

Highspeed

DX

�

Centrifugal fan DXWith exhaust spigot ø 100 mm

Lowspeed

�

F DX 200Efficiency class

33

Wal

l · D

uct ·

Cei

ling

Win

dow

· He

ater

Weight approx. kg 0.46 1.1 2.0 2.5

REW 90 KDpfaPa

REW 150/2DpfaPa

REW 200DpfaPa

� SpecificationTo be installed into ducting withnominal size Ø 100 mm. Casingof impact resistant polymer in-corporating guide vanes.High pressure profiled 5 bladeimpeller of polymer. Ball bearingmotor with thermal overloadprotection, maintenance freeand suitable for continuous op-eration. Rear-mounted terminalsfor electrical connection.

� SpecificationTo be installed into ducting withnominal size Ø 150 mm. Casingof impact resistant polymer in-corporating guide vanes.High pressure profiled 8 bladeimpeller of polymer. Reversibleball bearing motor with thermaloverload protection, mainte-nance free and suitable for con-tinuous operation. Rear-mount-ed terminals for electrical con-nection.

� SpecificationTo be installed into ducting withnominal size Ø 200 mm. Casingwith two stiffening rings madefrom galvanised steel.High pressure profiled 7 bladeimpeller of polymer. Enclosed re-versible ball bearing motor withthermal overload protection,tropical protection of windingsand interference-free, mainte-nance free and suitable for con-tinuous operation with alumini-um die-cast casing. Terminals inmotor cap.

All dim. in mm All dim. in mmAll dim. in mm

� OperationAxial fans for smaller to mediumair flows against low resistances.Suitable for many applicationslike room ventilation, cooling,drying etc.

� InstallationInstallation in any position.Air flow direction depending oninstallation. Suitable for insertionin ducting. Please note thatpressure drops and resistancesof ducting must be considered.For higher resistances centrifu-gal fans should be considered.Electrical connection on motorend cap. Ensure that fan is ac-cessible for service.

Type REW 90 K REW 150/2 REW 200/4 REW 200/2

Ref. no. 0441 0440 7504 7505

Air flow reversible no DSEL 21) No. 1306 DSEL 2 2) No. 1306 DSEL 2 2) No. 1306

Air flow volume (FID) m3/h 105 330 550 930

Impeller Ø mm 93 140 200 200

Power consumption W 15 29 40 70

Current A 0.10 0.13 0.28 0.33

Sound pressure level dB(A) in 1 m 45 56 44 57

R.P.M. min-1 2320 2100 1350 2280

Protection to IP 55 IP 44 IP 54 IP 54

Voltage/Frequency 230 V~ / 50 Hz 230 V~ / 50 Hz 230 V~ / 50 Hz 230 V~ / 50 Hz



V· (m3/h) V· (m3/h)V· (m3/h)

REW 90 K REW 150/2 REW 200

� AccessoriesSpeed controller with reversingswitch (for REW 150 and 200)Type BSX Ref. no. 0240

1) NYM-O 3 x 1.5 mm2 cable required for reverse operation 2) NYM-J 4 x 1.5 mm2 cable required for reverse operation

r = 1,20 kg/m3 r = 1,20 kg/m3 r = 1,20 kg/m3

� Accessory details PageFlexible ducting,roof outletsand grilles 487 onAir intake and extract elementsand poppet valves 500 onSpeed controllers, switchesand overrun timers 525 on

Axial in-duct fans REW

Helios_Catalogue_4.0_GB_022_023Helios_Catalogue_4.0_GB_024_025Helios_Catalogue_4.0_GB_026_027Helios_Catalogue_4.0_GB_028_029Helios_Catalogue_4.0_GB_030Helios_Catalogue_4.0_GB_031Helios_Catalogue_4.0_GB_032Helios_Catalogue_4.0_GB_033

mini fans minivent m1/100 · 2017. 1. 12. · 3) with manual operation. 4) limit value 60, 70, 80,...

Documents