mini a4 and a3 pull up banners – assembling · title: microsoft word - mini a4 and a3 pull up...
TRANSCRIPT
National Customer Service Centre Tel: 1800 422 349
Fax: 1800 819 985
Mini A4 and A3 Pull Up Banners – Assembling STEP 1: Open up a box with the A4 or A3 banner and take out the top bar. Please note that the top bars for all A3/A4 mini banners have an adhesive side rather than a clip bar. STEP 2: Remove first 10% to 15% of the cover tape and align the top of the print with the top of the aluminum bar then start sticking the print carefully to the adhesive tape, going from one side to the other slowly removing the rest of the cover tape.
STEP 3: Take out a base of the banner from it’s packaging and start sticking the bottom part of the print to the base, same way you did it for the top bar (by first removing 10% of the cover tape and working your way to the other side of the base) STEP 4: Reinforce it with the strip of the sticky tape.
STEP 5: Now we need to guide the print into the base. Hold on firmly to the print and remove the pin on the left (Note: Once the pin is removed, A3/A4 pull up banner will start retracting the print, so ensure you hold on to it firmly).
STEP 6: Once the print is in the base, it is ready to be assembled.
STEP 7: To setup MiniA3/A4 banner, simply join the 2 metal poles together, pull out the graphics and clip the top section to the top aluminum bar.