mile marker - amazon web...
TRANSCRIPT
PRODUCT GUIDE 2015
MILE MARKER™
1.
table of contents
Terms and Conditions Warranty 2 Ordering 2 Shipping 2-3 Locking Information 3 Lock Core Order Form 4
Product Information COM/COL 5 Materials 6-7 Environmental Attributes 8
Base Cabinets Design Features 9 Single Base Cabinets 10-17 Double Base Cabinets 18-21 Single Sink Cabinets 22-23 Double Sink Cabinets 24-25 ADA Sink Cabinets 26 Base Fillers, Corner Fillers & End Panels 27-28
Wall Hanging Base Cabinets Single Base Cabinets 29-36 Double Base Cabinets 37-38 Single Sink Cabinets 39 Double Sink Cabinets 40 Base Fillers, Corner Fillers & End Panels 41
Work Surfaces Design Features 42 Laminate Work Surfaces with Backsplash 43-45 Solid Surface Work Surfaces with Backsplash 46-48 Work Surface Support Brackets 49
Upper Cabinets Design Features 50 Single Upper Cabinets 51-53 Double Upper Cabinets 54 Upper Fillers 55
Storage Cabinets Design Features 56 Single Storage Cabinets 57-64 Double Storage Cabinets 65-66 Storage Fillers 67-68 Media Cabinets 69-74 Storage Servers 75-76 Bedside Cabinets 77-79 Lockers 80-88
Benches Design Features 89 Single Sided Benches 90-91 Double Sided Benches 92-93
Wall Panels Design Features 94 Flat Panels 95-96 Raised Panels 97-98
Accessories & Equipment Rails 99-103
Index by Section by Model Number 104-113
2.
terms and conditions
limited lifetime warranty Carolina warrants products it manufactures against defects of material and workmanship under normal use and service for the life of the product to the original purchaser This warranty shall not apply to any products which have been subjected to misuse, accidents, abuse, abnormal usage, negligence, improper maintenance, damaged in transportation or whose original construction has been altered by someone other than Carolina or its authorized agents No unauthorized person, agent or dealer may give further warranties on behalf of Carolina
(Please note: Because of natural variations on materials over which Carolina has no control, this warranty does not extend to color, grain or texture of wood, laminate, leather or upholstery cover )
Normal aging and wear of fabrics, filling materials, laminates and finishes are exempted from this warranty
Carolina shall not be responsible for any expenses incurred by purchaser to repair or replace any product unless Carolina gave prior express written consent agreeing to reimburse purchaser
In the event any product has to be returned to the factory for verification of a complaint, it must be pre-authorized by the factory and shipped prepaid along with written information containing the name of the original purchaser, original invoice number, and a copy of the original purchase order
As purchaser’s sole and exclusive remedy under this warranty, Carolina, at its option, will repair or replace the damaged product or parts that meet the terms and conditions of this warranty at no charge to the original owner of record, and will pay the freight charges provided Carolina has previously authorized the replacement or return
Except as stated above, Carolina makes no other expressed warranties and disclaims all implied warranties as to any product, including warranty of merchantability and fitness for any particular purpose Carolina shall not be liable for any consequential or incidental damages This warranty is applicable only to those parts actually manufactured by Carolina
All drawer glide suspensions — lifetime All locking mechanisms — lifetime All door hinges — 12 years Door Latches — 12 years Drawer Pulls — 12 years
On product furnished by Carolina, but with components or equipment manufactured by others, including, but not limited to, foam, mechanisms, casters and textiles, the written warranty, if any, of the manufacturer is assigned to the purchaser
ordering information All orders should be placed with: Carolina — an OFS Brands™ companyPO Box 4398Archdale, NC 27263800 763 0212 or 336 431 9400Fax 336 884 7209oenc@carolinabuisnessfurniture com
all orders must include • Your company name, address, telephone, and fax number • Contact person • Authorized signature • Purchase order number • Sold to address • Ship to address • Order date • Requested ship date • Complete style number (including all prefix and suffix numbers) • Quantity • Wood and/or laminate finish (refer to pages 5 and 6 for a complete list of Carolina standard wood finishes) • Correct Net Dealer Pricing • Any special instructions
Please check your order carefully before mailing or faxing to order entry to make sure that all ordering information is included on the purchase order.
pricing All prices herein are list prices including delivery to one destination, effective with the date printed on the cover and supersede all other published price lists US List Prices are domestic prices only for shipment within the Continental United States Prices are subject to change without notice, unless quoted in writing Possession of the price list does not constitute authority to sell or offer for sale Carolina products
acknowledgements You will receive a factory acknowledgement of your order by fax Please check all factory acknowledgements to confirm your original purchase order Once an order is acknowledged to you, the factory will be responsible for shipping exactly the items acknowledged at the prices acknowledged No adjustments can be made to an order once it has been placed into production without penalty (see Cancellations)
Carolina reserves the right to alter products for improved construction and method of manufacturing Dimensions may differ from printed specifications since materials may vary slightly
Due to monetary fluctuations and changing material costs, Carolina reserves the right to change pricing without notification All orders are subject to prices prevailing at time of order and shipment within standard lead times
quantity orders Contact your Carolina Customer Service Representative to verify inventory and production schedules to ensure requested shipment date prior to placing large quantity orders
delivery and freight charges All shipments are F O B point of shipment, freight prepaid and allowed, excluding fuel surcharges Shipments outside of the Continental United States are freight prepaid and allowed to port of exit Carolina reserves the right to select the most appropriate carrier and routing on all shipments; however, we will try to accommodate requests for your preferred carrier Carolina reserves the right to implement a fuel surcharge Orders of less than $1500 net will be assessed a handling charge of $100 net per order (this will be waived for items shipped via UPS) Any charges arising from failure to receive a shipment, rerouting while in transit, or carrier storage charges are not included in prices shown Orders requiring special services are subject to an additional charge These services include: • Reconsignment from original destination to new destination - $35 plus $3 00 per mile net • Refused/Returned Freight • Freight refused at destination and returned to Carolina - Double Freight • Freight refused at time of delivery; returned to Carolina to deliver at a later date - Triple Freight • Detention Fees (after 2 hours of waiting) - $85 net per hour • Weekend delivery available Friday after 3:00 p m through Sunday night, or Holiday - $600 net per truck • Customer Pickup • Customer Request for 3rd party to pick up freight at Carolina terminal - $125 net • Change of Tags/Address/Phone #’s on Shipments - $35 net
cancellations and order changes Acknowledged orders are considered firm and binding and are not subject to change or cancellation
warehouse storage charges If a shipment is held beyond fourteen (14) calendar days after the order is ready for shipment at your request, a 0 067% per day (2% per month) storage charge will be assessed The effective date will be fourteen (14) calendar days after the order is ready for shipment, as long as this date is after the acknowledged ship date Further, the prices applied to the order will be those prices in effect at the time of shipment
extended production and ship dates Orders placed with Carolina with extended lead times as requested by you will be subject to price in effect at time of shipment
3.
terms and conditions
damaged merchandise and freight claims 1 Inspect all cartons for damage and verify carton quantity All shipments are delivered to the transportation company in good condition; Carolina’s liability ceases at this time Do not refuse merchandise damaged in transit Instead, enter a claim with the transportation company
2 Record damages and/or shortages on the bill of lading and freight bill Do not accept the shipment until all shortages are noted on both the bill of lading and the freight bill Sign only for the items you receive If you give the delivering carrier a clear receipt for a shipment, the carrier is relieved of further responsibility
3 If concealed damage is found: Notify the delivering carrier at once and request an inspection This must be done within 20 calendar days of delivery Without this inspection the transportation company will not entertain a claim for loss or damage If the carrier will not perform the inspection, you should prepare an affidavit that you contacted the carrier, noting the time and date, and that the carrier failed to comply with your request All shipping cartons and inner packing must be retained for carrier inspection Do not move the damaged merchandise from the receiving location It must also be retained for the inspection
returns Carolina will not accept returned merchandise without a signed Return Authorization (RA) issued by our Customer Service Department All returned merchandise must be properly packaged and cartoned to prevent further damage Carton must be clearly marked with identifying RA number so that proper credit can be issused
We will consider issuing RAs for the following reasons: • Manufacturing defect (must be inspected by a Carolina sales representative) • Carolina order processing error • Shipping error • Duplicate shipments • Mismarked cartons
All merchandise must be returned within thirty (30) days of the date of the RA to receive credit Freight damage, signs of usage, missing parts, etc , will be adjusted on the amount of credit to be issued
installation Mile Marker products must be installed by a qualified installer Installers are responsible for selecting and supplying appropriate fasteners and must verify the adequacy of the mounting hardware Improper installation may cause damage or serious injury Carolina cannot be held liable for damage or injury caused by incorrect mounting, assembly or use The instructions are only a suggested installation method and installers are responsible for following all local codes and regulations Complete installation guides are available through Carolina Customer Service or from the Carolina website - www carolinabusinessfurniture com
repair charges Reimbursement from Carolina for repairs must have prior approval
fabric We have fabric programs with ArcCom, Architex, cf stinson, Maharam, Momentum, Ultrafabrics and Conneaut Leather Refer to the Carolina website for grading information
base molding To complete the installation, base cove molding needs to be installed
locking informationFactory Installed Locks are always keyed alike with key number 345T
Specific Key OptionsRequirements for specific key options by office must be specified on the purchase order at the time the order is placed Model Numbers with specific key options will specify option “NM” for locking option on the acknowledgment A separate line item will be listed on the acknowledgment as “LOCK CORE SET ” Specific lock cores and keys will be sent separately (see Field Installation below) Field InstallationBlank lock cores are installed at factory, allowing specific lock numbers to be ordered but shipped in a separate package for field installation Lock Core Order Form (see page 4) must be filled out and submitted with the purchase order Lock core/key numbers 100 through 150 are available
Re-keying in the FieldLock cores and keys can be purchased separately The purchase order must specify quantity, key number(s), and color of the core (available in nickel, brass or black) Key numbers above number 150 are not stocked and may require a 2-week lead time Orders ship standard UPS ground
Note: A lock core change tool must be ordered for lock cores that will be re-keyed in the field
ItemLock Core and Key $18 listLock Core Change Tool $28 listMaster Key $28 list
All items are non-returnable
4.
OFS FIRSTOFFICE CAROLINA
ORDER
BRAND
OFS BRANDS | LOCK CORE ORDER FORM
FORM DETAILS
ORDER INFORMATION
QUANTITY KEY NUMBER COLOR TAG
LOCK CORE ORDER FORM
If this lock core order form is not submitted with the purchase order, all units will be keyed 345T.
Please note, each lock ordered consists of one (1) core and one (1) key.
Please print legibly and fill out every applicable field below.
DATE (mm/DD/yyyy)
COmmENTS
SUBmITTED By
DEALER NAmE END USER NAmE
PURCHASE ORDER NUmBER ACKNOWLEDGmENT NUmBER
Please circle the brand to which this order applies.
Please continue on additional pages if needed. Mark the page number here.
Please indicate the brand to which this order applies. If ordering for multiple brands, please use a different form for each brand.
Lock cores are available in NICKEL [N], BRASS [BR] or BLACK [K]. Key numbers 100-150 are in stock and available for shipment
with the purchase order. Other key numbers will be ordered, acknowledged and shipped on a separate order with a three (3)
week delivery.
PAGE NUmBER
TOTAL PAGES
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
[N] [BR] [K]
5.
com and col
Customer’s Own Material (com) & Graded-In Textile PolicyCarolina offers the option for customers to send their own fabric for upholstery. COM orders will be scheduled and fulfilled after receipt of the COM.Carolina, as a convenience to our customers, will purchase the fabric from the manufacturer and quote a price grade for this service. When fabric is purchased by Carolina, Carolina accepts no responsibility for the warranty of the fabric. Carolina will evaluate the fabric to determine if it is possible to use this type of fabric on our furniture, but this does not warrant or determine the perfor-mance of the fabric. Any warranty claims for these upholstery materials will fall to the original vendor of the fabric, not Carolina. With a broad spectrum of harsh cleaning agents used by facilities, Carolina recommends that the owner test each fabric selection with their specific cleaning methods before ordering.
com/col ordering instructionsAll COM and COL materials must be submitted to OFS for preliminary approval prior to shipment of fabric or leather. OFS approval signifies only that such materials can be applied to the products for which they are intended. Such approval does not constitute any responsibility nor any warranty on the part of OFS as to the appearance, behavior or durability of the COM or COL.
1. Send 4" x 4" swatch for approval to: OFS, Attn: Customer Service, 1204 East 6th Street, Huntingburg, IN 47542
2. Send a swatch along with the order to: OFS, Attn: Customer Service, 1204 East 6th Street, Huntingburg, IN 47542
3. Specify the COM or COL supplier's company name, pattern, color and number.
4. The COM or COL supplier must include the dealer name and purchase order number on all packing lists.
5. Include application instructions for striped, plaid, patterned or unusually designed fabrics (i.e. direction of stripes) and which face to use on reversible fabrics.
6. Ship COM or COL material to: OFS Plant 3, Attn: COM Department, 105 West 10th Street, Huntingburg, IN 47542
COM and COL orders will be scheduled for production only upon receipt of production yardage. In the absence of a representative sample sent with the purchase order or application instructions, OFS will apply the fabric in what it determines to be the best manner and cannot be held responsible after upholstering.
Excess COM/COL materials will be discarded at the discretion of OFS unless otherwise instructed by the customer at the time the order is placed.
com yardage requirements (railroaded fabrics) For clarification and convenience, OFS has listed yardage requirements for non-directional COM and COL for each frame throughout the price list. Yardage requirements are based on 54" wide plain fabric. Extra fabric is needed to match any pattern with matching repeats. Use the chart below as a guide for additional COM yardage needed where repeats are involved.
Repeat Percentile of Extra Fabric Needed
1" - 4" Additonal 10%
5" - 9" Additional 20%
10" - 14" Additional 25%
15" - 19" Additional 30%
Repeats larger than 19", fabrics less than 54" wide, or fabrics requiring matching (stripes, plaids, prints, large patterns) will require additional yardage based on the fabric used and the item ordered. COM must be a single cut piece. Multiple pieces will require more yardage. A swatch showing one full repeat must be sent for yardage requirement instructions for these special circumstances.
com application All COM fabrics are cut according to the fabric pattern at the discretion of OFS unless otherwise directed by the customer.
Fire Retardant ProductsCalifornia Technical Bulletin 117-2013: All Carolina upholstered seating products and the resilient filling materials used in the upholstered seating products meet or exceed the requirements of the State of California, Department of Consumer Affairs, Technical Bulletin 117-2013. Compliance with these requirements is indicated by the label attached to the seat bottom. Flame Retardant Chemicals: All standard Carolina upholstered seating products are offered with components, as identified in TB117-2013, that are free of flame retardant chemicals. All Carolina upholstered seating products will indicate Flame Retardant chemi-cal composition in accordance to the labeling requirements of Califor-nia Senate Bill 1019.California Technical Bulletin 133: Cal TB 133 is a flammability test for seating products used in public spaces. The testing procedure for Cal TB 133 requires the burning of an entire product since the test is a composite test and not a component test. Carolina has pre-tested and certified many different chair styles and upholsteries. If Cal TB 133 certification is required, a burn test may need to be com-pleted with a specific model and upholstery combination. Contact Customer Service for Cal TB 133 approval, pricing and lead times.
Carolina cannot be held liable if purchase order does not indicate a requirement for Cal TB 133 compliance. On some product lines, the fire barrier material may slightly affect the upholstered appearance.
Boston Fire Code: Please contact Carolina Customer Service if compliance is required.
com fire retardant products OFS assumes no responsibility for the fire retardancy of any COM/COL. Customers are solely responsible for making sure that their COM/COL complies with all applicable codes and regulations.
col (customer's own leather) COL requirements are based on an average hide size of 50-55 square feet. Please consult the sales office for requirements on sizes different from this. All square footage requirements are based on usable footage. The shape of the hide and the usable footage may make it necessary for us to request more leather after your COL is received. Please note that leather is a natural product and variation in texture is a pleasing quality belonging exclusively to high grade, full top grain leathers. Due to the variation in thickness of leather, OFS recommends sending a 4" x 4" swatch for approval. OFS approval signifies only that such materials can be applied to the products for which they are intended. Such approval does not constitute any responsibility nor any warranty on the part of OFS as to the appearance, behavior or durability of the COL.
Note: Calf hide requirements will vary based on the chair model selected. Please contact the sales office for pattern adaptability confirmation and square footage requirements prior to placing an order.
6.
materials
standard wilsonart hpl10734-60 Limber Maple10745-60 Fonthill Pear10776-60 Kensington Maple13045-60 Shale Moonstone1503-60 Putty1530-60 Beige1531-60 Light Beige1570-60 White1572-60 Antique White1763-60 Brune Slate1786-60 Verdi Oxide1787-60 Oxide1792-60 Nirvana2932-60 Almond Leather4142-60 Grey Glace4143-60 Neutral Glace4166-60 Pampas4168-60 Grey Pampas4170-60 Beige Pampas4207-60 Fresco4608-60 Caldera Beige4621-60 White Nebula4622-60 Grey Nebula4623-60 Graphite Nebula4624-60 Beige Nebula
Chassis/Door & Drawer/PVC Edge
4630-60 Cloud Nebula4633-60 Natural Nebula4651-60 Navy Legacy4654-60 Olive Legacy4656-60 Bronze Legacy4657-60 Green Legacy4663-60 Tawny Legacy4667-60 Green Tigris4669-60 Natural Tigris4672-60 Curry Tigris4673-60 Saffron Tigris4674-60 Evening Tigris4680-60 Lodestone4724-60 Milano Amber4725-60 Milano Brown4726-60 Milano Quartz4727-60 Milano Glen4728-60 Milano Mahogany4738-60 Ochre Roletta4744-60 Karratha Brush4745-60 Maroochy Brush4746-60 Woolamai Brush4757-60 Mystique Moonlight4758-60 Mystique Dusk4759-60 Mystique Marine4760-60 Mystique Night4761-60 Mystique Mount4762-60 Mystique Dawn
4763-60 Mystique Marsh4779-60 Pewter Brush4783-60 White Tigris4793-60 Windswept4794-60 Windswept Bronze4795-60 Windswept Pewter4796-60 Burnished Chestnut4798-60 Burnished Ember4810-60 Titanium EV4811-60 Silicon EV4812-60 Radium EV4813-60 Nickel EV4814-60 Tungsten EV4820-60 Carbon EV4823-60 Antique Brush4834-38 Natural Roca4835-38 Tumbled Roca4836-38 Villa Roca4837-38 Terra Roca4838-38 Antique Roca4839-38 Coral Roca4841-60 Desert Zephyr4842-60 Canyon Zephyr4843-60 Misted Zephyr4844-60 Loden Zephyr4845-60 Twilight Zephyr4846-60 Morro Zephyr4847-38 Mission Smoke
thermally-fused laminate (tfl) and pvc options
wood grainsLM2 Light Maple
BE2 Blonde Maple
MH2 Honey Maple
PW2 Quartered Maple
LC2 Light Cherry
MC2 Mocha Cherry
ofs brands standard high pressure laminate (hpl) for work surfaces
wood grainsTMP Light Maple
BEP Blonde Maple
HNP Honey Maple
PWP Quartered Maple
CHP Light Cherry
CMP Mocha Cherry
solid colorsBL2 Black
FW2 Frosty White
GR2 Grey
PN2 Platinum
SH2 Shadow
SG2 Slate Grey
WL2 Wallaby
Wilsonart -60 and -38 matte texture standard grade High Pressure Laminates (HPL) are available at standard list prices. Lead times may be extended depending on supplier’s availability. Chemsurf, custom laminates and others can be ordered at an upcharge with extended lead times. Please contact your CSR for a price quotation and availability.
Work Surfaces - HPL
4848-38 Mission Sage4849-38 Mission Adobe4850-38 Mission Stucco4851-38 Mission Sand4852-38 Mission Shadow4853-38 Mission Stone4854-38 Mission Glaze4856-60 Cloud Zephyr4857-60 Shadow Zephyr4858-60 Crisp Zephyr4859-60 Spiced Zephyr4869-60 Western White4870-60 Western Tan4871-60 Western Suede4872-60 Western Storm4873-60 Western Bronze4874-60 Western Hills4875-60 Western Iron4876-38 Sheer Mesh4877-38 Grey Mesh4878-38 Pewter Mesh4879-38 Steel Mesh4880-38 Carbon Mesh4881-38 Copper Mesh4882-38 Oiled Soapstone4883-38 Sable Soapstone4884-38 Flame Soapstone4885-38 Green Soapstone
Textures (10% Upcharge)NT2 Natural White (10% upcharge)
NG2 Natural Champagne (10% upcharge)
NH2 Natural Steamwash (10% upcharge)
Textures (10% Upcharge)NTP Natural White (10% upcharge)
NGP Natural Champagne (10% upcharge)
NHP Natural Steam Wash (10% upcharge)
solid colorsBLP Black
FWP Frosty White
GRP Grey
PNP Platinum
SHP Shadow
SGP Slate Grey
WLP Wallaby
wood grains (cont.)VM2 Vintage Mahogany
QE2 Quartered Espresso Cherry
NW2 Natural Walnut
EN2 English Walnut
ST2 Steel Grey Oak
wood grains (cont.)MGP Vintage Mahogany
QEP Quartered Espresso Cherry
NWP Natural Walnut
MEP English Walnut
STP Steel Grey Oak
ofs brands standard 3D laminate (TFL) for work surfaces
wood grainsBE3 Blonde Maple (available 10/1/15)
LM3 Light Maple
MH3 Honey Maple
PW3 Quartered Maple
LC3 Light Cherry
MC3 Mocha Cherry
3D Laminates
wood grains (cont.)NT3 Natural White (10% upcharge)
NG3 Natural Champagne (10% upcharge)
NH3 Natural Steam Wash (10% upcharge)
wood grains (cont.)VM3 Vintage Mahogany
QE3 Quartered Espresso Cherry
NW3 Natural Walnut
EN3 English Walnut
ST3 Steel Grey Oak
solid colorsBL3 Black
FW3 Frosty White
GR3 Grey
PN3 Platinum
SH3 Shadow
SL3 Slate Grey (available 10/1/15)
7.
standard wilsonart hplThe following Wilsonart standard grade HPL's are available at standard list prices with extended lead times.
1755-60 Canyon Black4550-60 Granite4551-60 Blackstar Granite4552-60 Ebony Star4595-60 Bahia Granite4596-60 Egyptian Sun4724-60 Milano Amber4725-60 Milano Brown4726-60 Milano Quartz4727-60 Milano Glen4728-60 Milano Mahogany4781-60 Sunstone
materials
corian®Grade 1BisqueBoneCameo WhiteGlacier WhiteVanilla
Grade 2AbaloneAuroraCanyonLinenMauiMojaveMossPlatinumSaharaSandSandstoneSavannahSilt
Grade 5AcornAntarcticaAnthraciteArtic IceAzurite
Deep SeaDesertEarthEcruElderberryGrayliteHazelnutHickory SmokeJasmineJuniperLava RockMinerialNatural GrayPebbleRain CloudRosemarySaffronSagebrushSandalwoodSonoraSorrelStardustThymeTumbleweedVerdeWitch Hazel
livingstone®Grade 1 BechamelClayDuneFlaxIcy WhiteKey WestKlondikeOysterSand CastleStarry Night
Grade 2ArroyoBlue LagoonDesertEarthHeartlandMesaNorth RidgePebble BeachSanta FeSedonaTundra
7806-60 Bannister Oak7816-60 Solar Oak7850-60 Beigewood7888-60 Golden Oak7908-60 Sanibel Maple7909-60 Fusion Maple7911-60 Manitoba Maple7921-38 Tuscan Walnut7925-38 Monticello Maple7928-38 Castle Oak7929-38 Huntington Maple7937-38 River Cherry7938-38 New Age Oak7946-38 Brazilwood7953-38 Harvest Maple7954-38 Natural Rift7955-38 Chardonnay
standard wilsonart hpl (cont.)4886-38 Pearl Soapstone4887-38 Tan Soapstone4888-38 Rustic Slate4893-60 Tumbled Mosaic4902-38 Mercury Glass4903-38 Antique Glass4904-38 Desert Springs4905-38 Spicewood Springs4906-38 Willow Springs4907-38 Deep Springs4908-60 White Tea4909-60 Ginseng Tea4910-60 Chai Tea4911-38 Soft Gold Mesh4912-38 Gilded Mesh7054-60 Wild Cherry7061-60 Natural Pear
D14-60 PortD25-60 AtlantisD30-60 Natural AlmondD307-60 HollyberryD321-60 Brittany BlueD327-60 PepperdustD331-60 SandD354-60 Designer WhiteD379-60 IndigoD381-60 Fashion GreyD391-60 CloudD403-60 White SandD417-60 Lapis BlueD431-60 AlabasterD456-60 Café Crème
D478-60 AmazonD50-60 Khaki BrownD72-60 FeatherstoneD79-60 Hunter GreenD90-60 North SeaD92-60 Dove GreyD97-60 Haze
7122-38 Empire Mahogany7122-60 Empire Mahogany7922-38 Brighton Walnut7922-60 Brighton Walnut7923-60 Versailles Anigre7924-38 Biltmore Cherry7924-60 Biltmore Cherry7935-60 Shaker Cherry7936-60 Williamsburg Cherry7939-38 Blond Echo7941-38 Tan Echo7942-38 Cocobala
7943-38 Colombian Walnut7944-38 Madagascar7945-38 Xanadu7947-38 Rio7948-38 Mambo7949-38 Asian Night7951-38 Asian Sun7952-38 Asian Sand7960-38 Studio Teak7961-38 Yarrow7962-38 Aloe
4789-60 Limestone4790-60 Greystone4791-60 Willowstone4860-38 Silver Alchemy4861-38 Gold Alchemy4889-60 Milano Baltic4890-60 Milano Blaze4891-60 Milano Rosso4892-60 Polished Mosaic4899-38 Frosted Glass4900-38 Sea Glass4901-38 Bottle Glass
Work Surfaces - Solid Surfaces
Add the following upcharge to model list prices based on the solid surface grade specified.Upcharge grade pricing:Grade 1 - standardGrade 2 - $295Grade 3 - $590Grade 4 - $885Grade 5 - $1,180Grade 6 - $1,475Grade 7 - $1,770
OatOlivitePineRaffiaRice PaperSea FoamSerene SageSilver BirchSilver GraySilveriteSuedeSunVenaro WhiteWhipped CreamWhisperWhite JasmineWillow
Grade 6AllspiceArrowrootAqualiteAztec GoldBasilBurled BeachCinnabarClam ShellClove
Blue PebbleBlue SpiceBlueberry IceBronziteCanvasCilantroCobaltCocoa BrownConcreteCopperiteCottage LaneDesigner WhiteDoeskinDoveFawnFlintFossilGlacier IceGranolaGraphic BlueGreen TeaLime IceLuna WhiteMatterhornMedeaMint IceNight SkyNocturne
Grade 3AmbrosiaChestnutChocolate ChipCoral QuartzJakartaKonaMeredianMontanaOpusTuscanyVolcanic Ash
8.
Environmental Attributes & Memberships
International Facility Management Association®
MembershipsCarolina is proud to be a member and support these organizations:
The patented Euroluxe™ with SilverBan™ finish is a chemically re-engineered Urethane clear coat that preserves the depth
and clarity of OFS Brands finishes and achieves SCS Global Services’ Indoor Advantage Gold Certification. SilverBan™
technology utilizes silver ions infused into the Euroluxe™ wood finish for anti-microbial protection on all exposed
wood surfaces.
All OFS Brands products have achieved SCS Indoor Advantage Gold Certification from SCS Global Services. Indoor
Advantage Gold certification is SCS Global Services’ highest level of indoor air quality performance for furniture.
The certification assures that furniture products support a healthy indoor environment by meeting strict chemical
emission limits for volatile organic compounds (VOCs). To be certified, products must be tested by independent labs
for compliance with the ANSI/BIFMA X7.1, and either ANSI/BIFMA e.3 or CDPH/EHLB Standard Method V1-1 for VOC
emissions of concerns.
level® is the multi-attribute, sustainability standard and third-party certification program for the furniture industry. It
has been created to deliver the most open and transparent means of evaluating and communicating the environmental
and social impacts of furniture products in the built environment. Taking into account a company’s social actions, energy
usage, material selection and human and ecosystem health impacts, level addresses how a product is sustainable from
multiple perspectives. With level, customers can make informed choices about commercial furniture that exceed single
attribute ecocertifications. The level brand identifies that a product has been vetted by an independent third party
certifier and its numeric marking 1, 2, or 3 indicates what threshold of certification it has achieved. Manufacturers —big and
small—now have a methodology to present the environmental characteristics in a clear, easily understood manner with a
vernacular that gives end users the ability to make an “apples to apples” comparison.
SCS Global Services [SCS] has been providing global leadership in third-party quality, environmental and sustainability
verification, certification, auditing, testing, and standards development for three decades. Its programs span a
cross-section of industries, recognizing achievements in green building, product manufacturing, food and agriculture,
forestry, power generation retail, and more. SCS is accredited to provide services under a wide range of nationally and
internationally recognized certification programs. Consistent with its mission, SCS is a chartered benefit corporation and
Certified B Corp™, reflecting its commitment to socially and environmentally responsible business practices.
The FSC® standards [Forest Stewardship Council®] represent the world’s strongest system for guiding forest management
toward sustainable outcomes. us.fsc.org FSC certified products are manufactured with material that comes from managed
forests that are traceable from the time the logs are cut to the time the final project is installed and are recorded by way
of a COC or chain of custody claim on all invoices. The demand for certified forest products has grown significantly in
recent years. OFS Brands’ goal to act as a responsible steward of the environment encouraged us to pursue our FSC
Chain of Custody [COC] certification which would provide our customers (Dealer, A&D Community and End-users) the
added reassurance they’ve done their part to be earth friendly in their product purchase and enable them to substantiate
the LEED [Leadership in Energy and Environmental Design] Materials & Resources Credits for certified wood, in which
the intent is to encourage environmentally responsible forest management. FSC certification is optional on many, but not
all, OFS Brands’ product lines. Please contact OFS Brands Customer Service for information in regards to which of our
product ines are available as FSC certified, and what the necessary procedures are for ordering FSC certified products
from OFS Brands.
OFS Brands’ company-owned transportation company, Styline Logistics, is SmartWay-certified. SmartWay is one of U.S
Environmental Protection Agency’s [EPA] clean air programs that uses voluntary, rather than regulatory methods, to
achieve air quality benefits. SmartWay’s focus is in the transportation sector, and encompasses products and services
associated with fuel-consuming engines.
The “Premium Indiana Forest Products” brand tells everyone that there is an abundant, sustainable supply of the finest
Indiana hardwoods to meet consumer demand. It also tells them that Indiana’s forests are well-managed, legally-harvested
and environmentally responsible. The logo is reflective of the wood itself. Indiana hardwoods display a depth that
defies imagination.
9.
mile markertm base cabinets
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
BASE CABINET DESIGN FEATURES
adjustable and fixed shelves available for added flexibility.
drawer liners protect drawer interiors and provide easy cleanability of the drawer interior.
standard lock
optional keyless lock with combination keypad.
crest pullis available in satin nickel.
forte pullis available in black or satin nickel.
recessed pullis available in satin nickel.
euro 120 hinge
euro knuckle hinge
5 knuckle hinge
era pullis available in black or satin nickel.
doors and drawersare TFL (Thermally Fused Laminate) with 3 MM PVC edges.
chassisare TFL (Thermally Fused Laminate) with 1MM edge banding. White interiors or matching interiors are available.
adjustable levelersare included on all base cabinets for leveling on uneven floors.
10.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
To order, specify product by number and options: 1 2 3 Sample Order: MM-121833BC - LC2 - B4A - R8 product no exterior interior shelf color color
Base Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BC $406 12 17 5 33 45 6
MM-181833BC $434 18 17 5 33 50 8
MM-211833BC $458 21 17 5 33 55 10
MM-241833BC $479 24 17 5 33 60 11
MM-121836BC $417 12 17 5 36 50 7
MM-181836BC $439 18 17 5 36 55 9
MM-211836BC $458 21 17 5 36 60 10
MM-241836BC $479 24 17 5 36 65 12
MM-122433BC $451 12 23 5 33 55 8
MM-182433BC $467 18 23 5 33 60 11
MM-212433BC $491 21 23 5 33 65 12
MM-242433BC $509 24 23 5 33 70 14
MM-122436BC $462 12 23 5 36 60 8
MM-182436BC $477 18 23 5 36 65 12
MM-212436BC $510 21 23 5 36 70 13
MM-242436BC $519 24 23 5 36 75 15
MM-301833BC $505 30 17 5 33 70 13
MM-361833BC $531 36 17 5 33 75 16
MM-301836BC $562 30 17 5 36 80 14
MM-361836BC $595 36 17 5 36 85 17
MM-302433BC $530 30 23 5 33 75 17
MM-362433BC $558 36 23 5 33 80 20
MM-302436BC $592 30 23 5 36 85 18
MM-362436BC $640 36 23 5 36 90 22
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
base cabinets single
BA
SE C
AB
INE
TS
DescriptionThis open base cabinet is available in multiple sizes and has a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24", 30", 36"Available Sizes depth 18", 24" height 33", 36"
11.
BA
SE C
AB
INE
TS
base cabinets single
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121833BCD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Base Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BCD $530 12 18 25 33 50 6
MM-181833BCD $567 18 18 25 33 55 9
MM-211833BCD $599 21 18 25 33 60 10
MM-241833BCD $617 24 18 25 33 65 11
MM-121836BCD $587 12 18 25 36 55 7
MM-181836BCD $628 18 18 25 36 60 9
MM-211836BCD $660 21 18 25 36 65 11
MM-241836BCD $679 24 18 25 36 70 12
MM-122433BCD $580 12 24 25 33 60 8
MM-182433BCD $616 18 24 25 33 65 11
MM-212433BCD $648 21 24 25 33 70 13
MM-242433BCD $667 24 24 25 33 75 14
MM-122436BCD $636 12 24 25 36 65 9
MM-182436BCD $679 18 24 25 36 70 12
MM-212436BCD $713 21 24 25 36 75 14
MM-242436BCD $734 24 24 25 36 80 16
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis base cabinet with door is available in multiple sizes and has a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24"Available Sizes depth 18", 24" height 33", 36"
12.
BA
SE C
AB
INE
TS
base cabinets single
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121833BCDO - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Base Cabinet with Door Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BCDO $510 12 18 25 33 50 6
MM-181833BCDO $547 18 18 25 33 55 9
MM-211833BCDO $579 21 18 25 33 60 10
MM-241833BCDO $597 24 18 25 33 65 11
MM-121836BCDO $567 12 18 25 36 55 7
MM-181836BCDO $608 18 18 25 36 60 9
MM-211836BCDO $640 21 18 25 36 65 11
MM-241836BCDO $659 24 18 25 36 70 12
MM-122433BCDO $570 12 24 25 33 60 8
MM-182433BCDO $596 18 24 25 33 65 11
MM-212433BCDO $628 21 24 25 33 70 13
MM-242433BCDO $647 24 24 25 33 75 14
MM-122436BCDO $616 12 24 25 36 65 9
MM-182436BCDO $659 18 24 25 36 70 12
MM-212436BCDO $693 21 24 25 36 75 14
MM-242436BCDO $714 24 24 25 36 80 16
DescriptionThis base cabinet is available in multiple sizes and has 1 full hinged door and adjustable levelers for installa-tion on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24"Available Sizes depth 18", 24" height 33", 36"
13.
base cabinets singleBase Cabinet with Door/Drawer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BCDD $722 12 18 25 33 50 6
MM-181833BCDD $788 18 18 25 33 55 9
MM-211833BCDD $842 21 18 25 33 60 10
MM-241833BCDD $868 24 18 25 33 65 11
MM-121836BCDD $732 12 18 25 36 55 7
MM-181836BCDD $797 18 18 25 36 60 9
MM-211836BCDD $851 21 18 25 36 65 11
MM-241836BCDD $878 24 18 25 36 70 12
MM-122433BCDD $803 12 24 25 33 60 8
MM-182433BCDD $868 18 24 25 33 65 11
MM-212433BCDD $922 21 24 25 33 70 13
MM-242433BCDD $949 24 24 25 33 75 14
MM-122436BCDD $812 12 24 25 36 65 9
MM-182436BCDD $878 18 24 25 36 70 12
MM-212436BCDD $932 21 24 25 36 75 14
MM-242436BCDD $959 24 24 25 36 80 16
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
10 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 10 Sample Order: MM-121833BCDD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 - Q4 product no exterior interior door/drawer door edge shelf hinge hinge lock pull drawer color color color color location liner
BA
SE C
AB
INE
TS
DescriptionThis base cabinet is available in multiple sizes and has 1 drawer, 1 full hinged door, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24"Available Sizes depth 18", 24" height 33", 36"
BA
SE C
AB
INE
TS
14.
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 10 Sample Order: MM-121833BCDDO LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 - Q4 product no exterior interior door/drawer door edge shelf hinge hinge lock pull drawer color color color color location liner
base cabinets singleBase Cabinet with Door/Drawer Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BCDDO $702 12 18 25 33 50 6
MM-181833BCDDO $768 18 18 25 33 55 9
MM-211833BCDDO $822 21 18 25 33 60 10
MM-241833BCDDO $848 24 18 25 33 65 11
MM-121836BCDDO $712 12 18 25 36 55 7
MM-181836BCDDO $777 18 18 25 36 60 9
MM-211836BCDDO $831 21 18 25 36 65 11
MM-241836BCDDO $858 24 18 25 36 70 12
MM-122433BCDDO $783 12 24 25 33 60 8
MM-182433BCDDO $848 18 24 25 33 65 11
MM-212433BCDDO $902 21 24 25 33 70 13
MM-242433BCDDO $929 24 24 25 33 75 14
MM-122436BCDDO $792 12 24 25 36 65 9
MM-182436BCDDO $858 18 24 25 36 70 12
MM-212436BCDDO $912 21 24 25 36 75 14
MM-242436BCDDO $939 24 24 25 36 80 16
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
10 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis base cabinet is available in multiple sizes and has 1 drawer, 1 hinged door and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24"Available Sizes depth 18", 24" height 33", 36"
BASE CABINETSbase cabinets single
Base Cabinet with 2 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BC2 $831 12 18 25 33 55 6
MM-181833BC2 $926 18 18 25 33 60 9
MM-211833BC2 $971 21 18 25 33 65 10
MM-241833BC2 $998 24 18 25 33 70 11
MM-121836BC2 $980 12 18 25 36 60 7
MM-181836BC2 $1035 18 18 25 36 65 9
MM-211836BC2 $1066 21 18 25 36 70 11
MM-241836BC2 $1093 24 18 25 36 75 12
MM-122433BC2 $928 12 24 25 33 65 8
MM-182433BC2 $986 18 24 25 33 70 11
MM-212433BC2 $1031 21 24 25 33 75 13
MM-242433BC2 $1058 24 24 25 33 80 14
MM-122436BC2 $1042 12 24 25 36 70 9
MM-182436BC2 $1093 18 24 25 36 75 12
MM-212436BC2 $1125 21 24 25 36 80 14
MM-242436BC2 $1152 24 24 25 36 85 16
MM-301833BC2 $1031 30 18 25 33 80 14
MM-361833BC2 $1065 36 18 25 33 85 16
MM-301836BC2 $1098 30 18 25 36 90 15
MM-361836BC2 $1126 36 18 25 36 95 17
MM-302433BC2 $1151 30 24 25 33 85 18
MM-362433BC2 $1183 36 24 25 33 90 21
MM-302436BC2 $1210 30 24 25 36 95 19
MM-362436BC2 $1242 36 24 25 36 100 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Drawer Color Options Standard TFL Options (see page 6)
3 Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121833BC2 - LC2 - LC2 - LC2 - NM - T5 - Q5 product no exterior drawer drawer lock pull drawer color color edge liner color
DescriptionThis base cabinet is available in multiple sizes and has 2 drawers, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold sepa-rately) are attached to the top of this cabinet
width 12",18", 21", 24", 30", 36"Available Sizes depth 18", 24" height 33", 36"
15.
16.
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121833BC3 - LC2 - LC2 - LC2 - NM - T5 - Q6 product no exterior drawer drawer lock pull drawer color color edge liner color
width 12", 18", 21", 24", 30", 36"Available Sizes depth 18", 24" height 33", 36"
BA
SE C
AB
INE
TS
base cabinets singleBase Cabinet with 3 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BC3 $899 12 18 25 33 55 6
MM-181833BC3 $987 18 18 25 33 60 9
MM-211833BC3 $1065 21 18 25 33 65 10
MM-241833BC3 $1098 24 18 25 33 70 11
MM-121836BC3 $1017 12 18 25 36 60 7
MM-181836BC3 $1097 18 18 25 36 65 9
MM-211836BC3 $1162 21 18 25 36 70 11
MM-241836BC3 $1195 24 18 25 36 75 12
MM-122433BC3 $1001 12 24 25 33 65 8
MM-182433BC3 $1088 18 24 25 33 70 11
MM-212433BC3 $1166 21 24 25 33 75 13
MM-242433BC3 $1199 24 24 25 33 80 14
MM-122436BC3 $1114 12 24 25 36 70 9
MM-182436BC3 $1195 18 24 25 36 75 12
MM-212436BC3 $1260 21 24 25 36 80 14
MM-242436BC3 $1293 24 24 25 36 85 16
MM-301833BC3 $1137 30 18 25 33 80 14
MM-361833BC3 $1180 36 18 25 33 85 16
MM-301836BC3 $1240 30 18 25 36 90 15
MM-361836BC3 $1288 36 18 25 36 95 17
MM-302433BC3 $1232 30 24 25 33 85 18
MM-362433BC3 $1275 36 24 25 33 90 21
MM-302436BC3 $1335 30 24 25 36 95 19
MM-362436BC3 $1383 36 24 25 36 100 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Drawer Color Options Standard TFL Options (see page 6)
3 Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130 Three Liners (Q6) + $195
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis base cabinet is available in multiple sizes and has 3 drawers, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
17.
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121833BC4 - LC2 - LC2 - LC2 - NM - T5 - B3F product no exterior drawer drawer lock pull drawer color color edge liner color
base cabinets singleBase Cabinet with 4 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121833BC4 $967 12 18 25 33 55 6
MM-181833BC4 $1048 18 18 25 33 60 9
MM-211833BC4 $1159 21 18 25 33 65 10
MM-241833BC4 $1198 24 18 25 33 70 11
MM-121836BC4 $1054 12 18 25 36 60 7
MM-181836BC4 $1158 18 18 25 36 65 9
MM-211836BC4 $1252 21 18 25 36 70 11
MM-241836BC4 $1290 24 18 25 36 75 12
MM-122433BC4 $1074 12 24 25 33 65 8
MM-182433BC4 $1192 18 24 25 33 70 11
MM-212433BC4 $1301 21 24 25 33 75 13
MM-242433BC4 $1313 24 24 25 33 80 14
MM-122436BC4 $1186 12 24 25 36 70 9
MM-182436BC4 $1283 18 24 25 36 75 12
MM-212436BC4 $1375 21 24 25 36 80 14
MM-242436BC4 $1415 24 24 25 36 85 16
MM-301833BC4 $1217 30 18 25 33 80 14
MM-361833BC4 $1262 36 18 25 33 85 16
MM-301836BC4 $1359 30 18 25 36 90 15
MM-361836BC4 $1430 36 18 25 36 95 17
MM-302433BC4 $1340 30 24 25 33 85 18
MM-362433BC4 $1367 36 24 25 33 90 21
MM-302436BC4 $1460 30 24 25 36 95 19
MM-362436BC4 $1524 36 24 25 36 100 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Drawer Color Options Standard TFL Options (see page 6)
3 Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130 Three Liners (Q6) + $195 Four Liners (B3F) + $260
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis base cabinet is available in multiple sizes and has 4 drawers, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold sepa-rately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
width 12", 18", 21", 24", 30", 36"Available Sizes depth 18", 24" height 33",36"
18.
BA
SE C
AB
INE
TS
base cabinets double
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301833BCD - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Base Cabinet with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BCD $701 30 18 25 33 75 14
MM-361833BCD $734 36 18 25 33 80 16
MM-301836BCD $775 30 18 25 36 85 15
MM-361836BCD $815 36 18 25 36 90 17
MM-302433BCD $796 30 24 25 33 80 18
MM-362433BCD $829 36 24 25 33 85 21
MM-302436BCD $870 30 24 25 36 90 19
MM-362436BCD $910 36 24 25 36 95 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 30", 36"Available Sizes depth 18", 24" height 33",36"
DescriptionThis base cabinet is available in multiple sizes and has 2 full hinged doors, a 4" recessed toe kick and adjust-able levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
19.
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301833BCDO - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Base Cabinet with Doors Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BCDO $661 30 18 25 33 75 14
MM-361833BCDO $694 36 18 25 33 80 16
MM-301836BCDO $735 30 18 25 36 85 15
MM-361836BCDO $775 36 18 25 36 90 17
MM-302433BCDO $756 30 24 25 33 80 18
MM-362433BCDO $789 36 24 25 33 85 21
MM-302436BCDO $830 30 24 25 36 90 19
MM-362436BCDO $870 36 24 25 36 95 22
base cabinets double
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 30", 36"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis base cabinet features 2 hinged doors and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
20.
BA
SE C
AB
INE
TS
base cabinets doubleBase Cabinet with Door/Drawer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BCDD $815 30 18 25 33 75 14
MM-361833BCDD $864 36 18 25 33 80 16
MM-301836BCDD $910 30 18 25 36 85 15
MM-361836BCDD $959 36 18 25 36 90 17
MM-302433BCDD $1005 30 24 25 33 80 18
MM-362433BCDD $1054 36 24 25 33 85 21
MM-302436BCDD $1100 30 24 25 36 90 19
MM-362436BCDD $1149 36 24 25 36 95 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
9 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-301833BCDD - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 - Q4 product no exterior interior door/drawer door/drawer shelf hinge lock pull drawer color color color edge liner color
width 30", 36"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis base cabinet features 1 drawer, 2 hinged doors, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
21.
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-301833BCDDO LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 - Q4 product no exterior interior door/drawer door/drawer shelf hinge lock pull drawer color color color edge liner color
base cabinets doubleBase Cabinet with Door/Drawer Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BCDDO $775 30 18 25 33 75 14
MM-361833BCDDO $824 36 18 25 33 80 16
MM-301836BCDDO $870 30 18 25 36 85 15
MM-361836BCDDO $919 36 18 25 36 90 17
MM-302433BCDDO $965 30 24 25 33 80 18
MM-362433BCDDO $1014 36 24 25 33 85 21
MM-302436BCDDO $1060 30 24 25 36 90 19
MM-362436BCDDO $1109 36 24 25 36 95 22
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
9 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 30", 36"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis base cabinet features 1 drawer, 2 hinged doors and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
BA
SE C
AB
INE
TS
22.
base cabinets single sink
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Location Left (B3K) Right (B3L)
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
7 Lock Options No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-241833BSC - LC2 - B4A - LC2 - LC2 - B3K - B3G - NM - T5 product no exterior interior door door edge hinge hinge lock pull color color color color location
Single Sink Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241833BSC $730 24 18 25 33 55 11
MM-241836BSC $789 24 18 25 36 60 12
MM-242433BSC $778 24 24 25 33 60 14
MM-242436BSC $840 24 24 25 36 65 16
width 24"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis sink base cabinet is available in multiple sizes and has 1 hinged door, a 4" recessed toe kick and adjust-able levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
23.
BA
SE C
AB
INE
TS
base cabinets single sinkSingle Sink Cabinet with Door Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241833BSCO $710 24 18 25 33 55 11
MM-241836BSCO $769 24 18 25 36 60 12
MM-242433BSCO $758 24 24 25 33 60 14
MM-242436BSCO $819 24 24 25 36 65 16
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-241833BSCO - LC2 - B4A - LC2 - LC2 - B3K - B3G - NM - T5 product no exterior interior door door edge hinge hinge lock pull color color color color location
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Location Left (B3K) Right (B3L)
6 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
7 Lock Options No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
width 24"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis sink base cabinet is available in multiple sizes and has 1 hinged door and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
24.
To order, specify product by number and options: 1 2 3 4 5 6 7 Sample Order: MM-301833BSC - LC2 - B4A - LC2 - LC2 - B3G - NM - T5 product no exterior interior door door edge hinge lock pull color color color color
base cabinets double sink
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
6 Lock Options No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
7 Pull Options (see page 9) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
Double Sink Cabinet with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BSC $760 30 18 25 33 60 14
MM-361833BSC $789 36 18 25 33 65 16
MM-301836BSC $815 30 18 25 36 65 15
MM-361836BSC $848 36 18 25 36 70 17
MM-302433BSC $875 30 24 25 33 65 18
MM-362433BSC $901 36 24 25 33 70 21
MM-302436BSC $932 30 24 25 36 70 19
MM-362436BSC $969 36 24 25 36 75 22
width 30", 36"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis sink base cabinet is available in multiple sizes and has 2 hinged doors, a 4" recessed toe kick and adjust-able levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
25.
BA
SE C
AB
INE
TS
base cabinets double sinkDouble Sink Cabinet with Doors Open Bottom
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301833BSCO $740 30 18 25 33 60 14
MM-361833BSCO $769 36 18 25 33 65 16
MM-301836BSCO $795 30 18 25 36 65 15
MM-361836BSCO $828 36 18 25 36 70 17
MM-302433BSCO $855 30 24 25 33 65 18
MM-362433BSCO $881 36 24 25 33 70 21
MM-302436BSCO $912 30 24 25 36 70 19
MM-362436BSCO $949 36 24 25 36 75 22
To order, specify product by number and options: 1 2 3 4 5 6 7 Sample Order: MM-301833BSCO - LC2 - B4A - LC2 - LC2 - B3G - NM - T5 product no exterior interior door door edge hinge lock pull color color color color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
6 Lock Options No Lock (NL) standard Standard Lock (NM) + $31 Keyless Lock (B3E) + $466
7 Pull Options (see page 9) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
width 30", 36"Available Sizes depth 18", 24" height 33", 36"
DescriptionThis sink base cabinet is available in multiple sizes and has 2 hinged doors and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
26.
base cabinets ada sink
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Front Chassis Color Options Standard TFL Options (see page 6)
3 Front Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 End Panels None (X9) standard Left (B4C) standard Right (B4D) standard Both (B4E) standard
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* End panels X9 option will be wall mounted only and have no adjustable levelers
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
ADA Sink Cabinet
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-361833ADA $755 36 18 25 33 60 16
MM-362433ADA $838 36 24 25 33 65 21
To order, specify product by number and options: 1 2 3 4 Sample Order: MM-361833ADA - LC2 - LC2 - LC2 - B4E product no exterior front front end color color edge panels color
X9 B4EB4DB4C
width 36"Available Sizes depth 18", 24" height 33"
DescriptionThis ADA sink cabinet is available in 2 sizes and has a removable angled front panel and adjustable levelers for installation on uneven floors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
27.
BA
SE C
AB
INE
TS
base cabinets fillerBase Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-633BF $95 6 2 33 3 1
MM-636BF $99 6 2 36 3 1
To order, specify product by number and options: 1 Sample Order: MM-633BF - LC2 product no exterior color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
Corner Base Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-833CBF $109 7 875 2 33 3 1
MM-836CBF $116 7 875 2 36 3 1
width 6" corner 8"Available Sizes depth 2" height 33", 36"
DescriptionThis base filler is available in 2 sizes and has a 4" recessed toe kick
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
BA
SE C
AB
INE
TS
28.
base cabinets end panel
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
Base End Panel
LIST DEPTH WIDTH HEIGHT WEIGHT CUBIC FT
MM-1833BE $102 0 75 17 5 33 12 2
MM-2433BE $135 0 75 23 5 33 17 2
MM-1836BE $111 0 75 17 5 36 14 2
MM-2436BE $147 0 75 23 5 36 18 2
To order, specify product by number and options: 1 Sample Order: MM-1833BE - LC2 product no exterior color
width 18", 24"Available Sizes depth 1" height 33", 36"
DescriptionThis base end panel is available in multiple sizes and has adjustable levelers for installation on uneven floors
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
wall hanging base cabinets singleWall Hanging Base Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121414HBC $210 12 13 1875 14 5 20 3
MM-181414HBC $239 18 13 1875 14 5 22 3
MM-211414HBC $264 21 13 1875 14 5 24 4
MM-241414HBC $287 24 13 1875 14 5 26 4
MM-121416HBC $256 12 13 1875 16 21 3
MM-181416HBC $286 18 13 1875 16 23 4
MM-211416HBC $310 21 13 1875 16 25 4
MM-241416HBC $335 24 13 1875 16 27 5
MM-121429HBC $456 12 13 1875 29 20 4
MM-181429HBC $489 18 13 1875 29 22 6
MM-211429HBC $510 21 13 1875 29 24 7
MM-241429HBC $532 24 13 1875 29 26 8
MM-121432HBC $485 12 13 1875 32 21 5
MM-181432HBC $510 18 13 1875 32 23 6
MM-211432HBC $535 21 13 1875 32 25 7
MM-241432HBC $548 24 13 1875 32 27 8
MM-121814HBC $319 12 17 5 14 5 25 3
MM-181814HBC $352 18 17 5 14 5 28 4
MM-211814HBC $388 21 17 5 14 5 31 5
MM-241814HBC $405 24 17 5 14 5 34 5
MM-121816HBC $352 12 17 5 16 26 3
MM-181816HBC $379 18 17 5 16 29 5
MM-211816HBC $398 21 17 5 16 32 5
MM-241816HBC $420 24 17 5 16 35 6
MM-121829HBC $476 12 17 5 29 20 5
MM-181829HBC $509 18 17 5 29 22 7
MM-211829HBC $528 21 17 5 29 24 9
MM-241829HBC $551 24 17 5 29 26 10
MM-121832HBC $505 12 17 5 32 21 6
MM-181832HBC $532 18 17 5 32 23 8
MM-211832HBC $553 21 17 5 32 25 9
MM-241832HBC $575 24 17 5 32 27 10
MM-122414HBC $425 12 23 5 14 5 25 4
MM-182414HBC $453 18 23 5 14 5 28 5
MM-212414HBC $480 21 23 5 14 5 31 6
MM-242414HBC $501 24 23 5 14 5 34 7
MM-122416HBC $448 12 23 5 16 26 4
MM-182416HBC $475 18 23 5 16 29 6
MM-212416HBC $499 21 23 5 16 32 7
MM-242416HBC $517 24 23 5 16 35 7
MM-122429HBC $528 12 23 5 29 25 7
MM-182429HBC $556 18 23 5 29 28 10
MM-212429HBC $577 21 23 5 29 31 11
MM-242429HBC $598 24 23 5 29 34 12
MM-122432HBC $545 12 23 5 32 26 8
MM-182432HBC $573 18 23 5 32 29 11
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
To order, specify product by number and options: 1 2 3 Sample Order: MM-121414HBC - LC2 - B4A - R8 product no exterior interior shelf color color
BA
SE C
AB
INE
TS
DescriptionThis open base cabinet is available in multiple sizes It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
continued on next page
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
29.
30.
To order, specify product by number and options: 1 2 3 Sample Order: MM-121414HBC - LC2 - B4A - R8 product no exterior interior shelf color color
BA
SE C
AB
INE
TS
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
DescriptionThis open base cabinet is available in multiple sizes It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
wall hanging base cabinets single (cont.)Wall Hanging Base Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-212432HBC $595 21 23 5 32 32 12
MM-242432HBC $615 24 23 5 32 35 14
MM-301414HBC $448 30 13 1875 14 5 30 5
MM-361414HBC $529 36 13 1875 14 5 34 6
MM-301416HBC $502 30 13 1875 16 32 6
MM-361416HBC $580 36 13 1875 16 36 7
MM-301429HBC $605 30 13 1875 29 30 9
MM-361429HBC $678 36 13 1875 29 34 11
MM-301432HBC $656 30 13 1875 32 32 10
MM-361432HBC $722 36 13 1875 32 36 12
MM-301814HBC $512 30 17 5 14 5 30 6
MM-361814HBC $575 36 17 5 14 5 34 8
MM-301816HBC $554 30 17 5 16 32 7
MM-361816HBC $629 36 17 5 16 36 8
MM-301829HBC $658 30 17 5 29 30 12
MM-361829HBC $730 36 17 5 29 34 14
MM-301832HBC $709 30 17 5 32 32 13
MM-361832HBC $757 36 17 5 32 36 15
MM-302414HBC $615 30 23 5 14 5 35 8
MM-362414HBC $668 36 23 5 14 5 37 10
MM-302416HBC $649 30 23 5 16 37 9
MM-362416HBC $715 36 23 5 16 39 11
MM-302429HBC $749 30 23 5 29 35 15
MM-362429HBC $817 36 23 5 29 37 18
MM-302432HBC $805 30 23 5 32 37 17
MM-362432HBC $845 36 23 5 32 39 20
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
BA
SE C
AB
INE
TS
31.
wall hanging base cabinets singleWall Hanging Base Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121414HBCD $308 12 14 14 5 22 3
MM-181414HBCD $339 18 14 14 5 24 4
MM-211414HBCD $364 21 14 14 5 26 4
MM-241414HBCD $406 24 14 14 5 28 4
MM-121416HBCD $335 12 14 16 23 3
MM-181416HBCD $370 18 14 16 25 4
MM-211416HBCD $393 21 14 16 27 4
MM-241416HBCD $452 24 14 16 29 5
MM-121429HBCD $433 12 14 29 22 5
MM-181429HBCD $456 18 14 29 24 6
MM-211429HBCD $484 21 14 29 26 7
MM-241429HBCD $503 24 14 29 28 8
MM-121432HBCD $507 12 14 32 23 5
MM-181432HBCD $526 18 14 32 25 7
MM-211432HBCD $528 21 14 32 27 8
MM-241432HBCD $549 24 14 32 29 9
MM-121814HBCD $357 12 18 25 14 5 22 3
MM-181814HBCD $385 18 18 25 14 5 24 4
MM-211814HBCD $414 21 18 25 14 5 26 5
MM-241814HBCD $432 24 18 25 14 5 28 6
MM-121816HBCD $382 12 18 25 16 23 3
MM-181816HBCD $410 18 18 25 16 25 5
MM-211816HBCD $439 21 18 25 16 27 5
MM-241816HBCD $457 24 18 25 16 29 6
MM-121829HBCD $499 12 18 25 29 22 6
MM-181829HBCD $532 18 18 25 29 24 8
MM-211829HBCD $564 21 18 25 29 26 9
MM-241829HBCD $583 24 18 25 29 28 10
MM-121832HBCD $520 12 18 25 32 23 6
MM-181832HBCD $557 18 18 25 32 25 8
MM-211832HBCD $589 21 18 25 32 27 10
MM-241832HBCD $607 24 18 25 32 29 11
MM-122414HBCD $455 12 24 25 14 5 28 4
MM-182414HBCD $487 18 24 25 14 5 30 6
MM-212414HBCD $516 21 24 25 14 5 32 6
MM-242414HBCD $534 24 24 25 14 5 34 7
MM-122416HBCD $480 12 24 25 16 31 4
MM-182416HBCD $512 18 24 25 16 33 6
MM-212416HBCD $541 21 24 25 16 35 7
MM-242416HBCD $559 24 24 25 16 37 8
MM-122429HBCD $530 12 24 25 29 28 7
MM-182429HBCD $566 18 24 25 29 30 10
MM-212429HBCD $599 21 24 25 29 32 11
MM-242429HBCD $615 24 24 25 29 34 13
MM-122432HBCD $575 12 24 25 32 31 8
MM-182432HBCD $611 18 24 25 32 33 11
MM-212432HBCD $643 21 24 25 32 35 12
MM-242432HBCD $662 24 24 25 32 37 14
width 12", 18", 21", 24"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121414HBCD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
DescriptionThis base cabinet with door is available in multiple sizes It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
wall hanging base cabinets singleWall Hanging Base Cabinet with Door/Drawer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429HBCDD $535 12 14 29 50 5
MM-181429HBCDD $556 18 14 29 55 6
MM-211429HBCDD $583 21 14 29 60 7
MM-241429HBCDD $602 24 14 29 65 8
MM-121432HBCDD $610 12 14 32 55 5
MM-181432HBCDD $625 18 14 32 60 7
MM-211432HBCDD $626 21 14 32 65 8
MM-241432HBCDD $651 24 14 32 70 9
MM-121829HBCDD $600 12 18 25 29 60 6
MM-181829HBCDD $635 18 18 25 29 65 8
MM-211829HBCDD $668 21 18 25 29 70 9
MM-241829HBCDD $685 24 18 25 29 75 10
MM-121832HBCDD $621 12 18 25 32 65 6
MM-181832HBCDD $655 18 18 25 32 70 8
MM-211832HBCDD $690 21 18 25 32 75 10
MM-241832HBCDD $711 24 18 25 32 80 11
MM-122429HBCDD $649 12 24 25 29 60 7
MM-182429HBCDD $695 18 24 25 29 65 10
MM-212429HBCDD $728 21 24 25 29 70 11
MM-242429HBCDD $751 24 24 25 29 75 13
MM-122432HBCDD $679 12 24 25 32 65 8
MM-182432HBCDD $714 18 24 25 32 70 11
MM-212432HBCDD $745 21 24 25 32 75 12
MM-242432HBCDD $778 24 24 25 32 80 14
width 12", 18", 21", 24"Available Sizes depth 14", 18", 24" height 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 9) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
10 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 10 Sample Order: MM-121429HBCDD LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 - Q4 product no exterior interior door/drawer door edge shelf hinge hinge lock pull drawer color color color color location liner
DescriptionThis base cabinet is available in multiple sizes and has 1 drawer and 1 full hinged door It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
32.
wall hanging base cabinets singleWall Hanging Base Cabinet with 2 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121414HBC2 $501 12 14 14 5 25 3
MM-181414HBC2 $526 18 14 14 5 27 4
MM-211414HBC2 $549 21 14 14 5 29 4
MM-241414HBC2 $570 24 14 14 5 31 4
MM-121416HBC2 $595 12 14 16 26 3
MM-181416HBC2 $612 18 14 16 28 4
MM-211416HBC2 $639 21 14 16 30 4
MM-241416HBC2 $655 24 14 16 32 5
MM-121429HBC2 $641 12 14 29 25 5
MM-181429HBC2 $660 18 14 29 27 6
MM-211429HBC2 $689 21 14 29 29 7
MM-241429HBC2 $705 24 14 29 31 8
MM-121432HBC2 $712 12 14 32 26 5
MM-181432HBC2 $728 18 14 32 28 7
MM-211432HBC2 $730 21 14 32 30 8
MM-241432HBC2 $755 24 14 32 32 9
MM-121814HBC2 $639 12 18 25 14 5 25 3
MM-181814HBC2 $679 18 18 25 14 5 27 4
MM-211814HBC2 $698 21 18 25 14 5 29 5
MM-241814HBC2 $715 24 18 25 14 5 31 6
MM-121816HBC2 $656 12 18 25 16 26 3
MM-181816HBC2 $695 18 18 25 16 28 5
MM-211816HBC2 $712 21 18 25 16 30 5
MM-241816HBC2 $732 24 18 25 16 32 6
MM-121829HBC2 $705 12 18 25 29 25 6
MM-181829HBC2 $742 18 18 25 29 27 8
MM-211829HBC2 $765 21 18 25 29 29 9
MM-241829HBC2 $780 24 18 25 29 31 10
MM-121832HBC2 $725 12 18 25 32 26 6
MM-181832HBC2 $758 18 18 25 32 28 8
MM-211832HBC2 $792 21 18 25 32 30 10
MM-241832HBC2 $811 24 18 25 32 32 11
MM-122414HBC2 $730 12 24 25 14 5 35 4
MM-182414HBC2 $765 18 24 25 14 5 37 6
MM-212414HBC2 $785 21 24 25 14 5 39 6
MM-242414HBC2 $812 24 24 25 14 5 41 7
MM-122416HBC2 $740 12 24 25 16 36 4
MM-182416HBC2 $782 18 24 25 16 38 6
MM-212416HBC2 $805 21 24 25 16 40 7
MM-242416HBC2 $819 24 24 25 16 42 8
MM-122429HBC2 $808 12 24 25 29 35 7
MM-182429HBC2 $830 18 24 25 29 37 10
MM-212429HBC2 $853 21 24 25 29 39 11
MM-242429HBC2 $862 24 24 25 29 41 13
MM-122432HBC2 $815 12 24 25 32 36 8
MM-182432HBC2 $865 18 24 25 32 38 11
MM-212432HBC2 $870 21 24 25 32 40 12
MM-242432HBC2 $912 24 24 25 32 42 14
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Door/Drawer Color Options Standard TFL Options (see page 6)
3 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121414HBC2 - LC2 - LC2 - LC2 - NM - T5 - Q5 product no exterior drawer drawer lock pull drawer color color edge liner color
33.
DescriptionThis base cabinet is available in multiple sizes and has 2 drawers It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
continued on next page
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
BA
SE C
AB
INE
TS
34.
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-301414HBC2 - LC2 - LC2 - LC2 - NM - T5 - Q5 product no exterior drawer drawer lock pull drawer color color edge liner color
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Door/Drawer Color Options Standard TFL Options (see page 6)
3 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 9)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130
DescriptionThis base cabinet is available in multiple sizes and has 2 drawers It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
wall hanging base cabinets single (cont.)Wall Hanging Base Cabinet with 2 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301414HBC2 $675 30 14 14 5 37 5
MM-361414HBC2 $759 36 14 14 5 39 6
MM-301416HBC2 $727 30 14 16 41 6
MM-361416HBC2 $799 36 14 16 43 7
MM-301429HBC2 $811 30 14 29 37 10
MM-361429HBC2 $882 36 14 29 39 11
MM-301432HBC2 $858 30 14 32 41 11
MM-361432HBC2 $920 36 14 32 43 12
MM-301814HBC2 $809 30 18 25 14 5 37 7
MM-361814HBC2 $875 36 18 25 14 5 39 8
MM-301816HBC2 $822 30 18 25 16 41 7
MM-361816HBC2 $895 36 18 25 16 43 9
MM-301829HBC2 $863 30 18 25 29 37 12
MM-361829HBC2 $902 36 18 25 29 39 14
MM-301832HBC2 $915 30 18 25 32 41 13
MM-361832HBC2 $990 36 18 25 32 43 16
MM-302414HBC2 $902 30 24 25 14 5 41 9
MM-362414HBC2 $974 36 24 25 14 5 44 10
MM-302416HBC2 $905 30 24 25 16 42 9
MM-362416HBC2 $979 36 24 25 16 46 11
MM-302429HBC2 $959 30 24 25 29 41 16
MM-362429HBC2 $1034 36 24 25 29 44 18
MM-302432HBC2 $1010 30 24 25 32 42 17
MM-362432HBC2 $1082 36 24 25 32 46 20
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
BA
SE C
AB
INE
TS
wall hanging base cabinets singleWall Hanging Base Cabinet with 3 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429HBC3 $740 12 14 29 25 5
MM-181429HBC3 $759 18 14 29 27 6
MM-211429HBC3 $782 21 14 29 29 7
MM-241429HBC3 $810 24 14 29 31 8
MM-121432HBC3 $815 12 14 32 26 5
MM-181432HBC3 $828 18 14 32 28 7
MM-211432HBC3 $830 21 14 32 30 8
MM-241432HBC3 $849 24 14 32 32 9
MM-121829HBC3 $808 12 18 25 29 25 6
MM-181829HBC3 $845 18 18 25 29 27 8
MM-211829HBC3 $865 21 18 25 29 29 9
MM-241829HBC3 $879 24 18 25 29 31 10
MM-121832HBC3 $827 12 18 25 32 26 6
MM-181832HBC3 $849 18 18 25 32 28 8
MM-211832HBC3 $895 21 18 25 32 30 10
MM-241832HBC3 $915 24 18 25 32 32 11
MM-122429HBC3 $910 12 24 25 29 25 7
MM-182429HBC3 $927 18 24 25 29 27 10
MM-212429HBC3 $948 21 24 25 29 29 11
MM-242429HBC3 $955 24 24 25 29 31 13
MM-122432HBC3 $912 12 24 25 32 26 8
MM-182432HBC3 $960 18 24 25 32 28 11
MM-212432HBC3 $969 21 24 25 32 30 12
MM-242432HBC3 $1010 24 24 25 32 32 14
MM-301429HBC3 $912 30 14 29 41 10
MM-361429HBC3 $985 36 14 29 44 11
MM-301432HBC3 $960 30 14 32 42 11
MM-361432HBC3 $1015 36 14 32 46 12
MM-301829HBC3 $965 30 18 25 29 41 12
MM-361829HBC3 $1005 36 18 25 29 44 14
MM-301832HBC3 $1012 30 18 25 32 42 13
MM-361832HBC3 $1089 36 18 25 32 46 16
MM-302429HBC3 $1055 30 24 25 29 41 16
MM-362429HBC3 $1131 36 24 25 29 44 18
MM-302432HBC3 $1109 30 24 25 32 42 17
MM-362432HBC3 $1180 36 24 25 32 46 20
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Drawer Color Options Standard TFL Options (see page 6)
3 Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130 Three Liners (Q6) + $195
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121429HBC3 - LC2 - LC2 - LC2 - NM - T5 - Q5 product no exterior drawer drawer lock pull drawer color color edge liner color
35.
DescriptionThis base cabinet is available in multiple sizes and has 3 drawers and 1 full hinged door It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 29", 32"
BA
SE C
AB
INE
TS
wall hanging base cabinets singleWall Hanging Base Cabinet with 4 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429HBC4 $835 12 14 29 25 5
MM-181429HBC4 $852 18 14 29 27 6
MM-211429HBC4 $878 21 14 29 29 7
MM-241429HBC4 $905 24 14 29 31 8
MM-121432HBC4 $917 12 14 32 26 5
MM-181432HBC4 $910 18 14 32 28 7
MM-211432HBC4 $925 21 14 32 30 8
MM-241432HBC4 $941 24 14 32 32 9
MM-121829HBC4 $912 12 18 25 29 25 6
MM-181829HBC4 $939 18 18 25 29 27 8
MM-211829HBC4 $960 21 18 25 29 29 9
MM-241829HBC4 $974 24 18 25 29 31 10
MM-121832HBC4 $922 12 18 25 32 26 6
MM-181832HBC4 $945 18 18 25 32 28 8
MM-211832HBC4 $999 21 18 25 32 30 10
MM-241832HBC4 $1011 24 18 25 32 32 11
MM-122429HBC4 $1005 12 24 25 29 25 7
MM-182429HBC4 $1022 18 24 25 29 27 10
MM-212429HBC4 $1045 21 24 25 29 29 11
MM-242429HBC4 $1050 24 24 25 29 31 13
MM-122432HBC4 $1011 12 24 25 32 26 8
MM-182432HBC4 $1055 18 24 25 32 28 11
MM-212432HBC4 $1064 21 24 25 32 30 12
MM-242432HBC4 $1100 24 24 25 32 32 14
MM-301429HBC4 $1015 30 14 29 41 10
MM-361429HBC4 $1082 36 14 29 44 11
MM-301432HBC4 $1018 30 14 32 42 11
MM-361432HBC4 $1059 36 14 32 46 12
MM-301829HBC4 $1064 30 18 25 29 41 12
MM-361829HBC4 $1105 36 18 25 29 44 14
MM-301832HBC4 $1110 30 18 25 32 42 13
MM-361832HBC4 $1184 36 18 25 32 46 16
MM-302429HBC4 $1149 30 24 25 29 41 16
MM-362429HBC4 $1225 36 24 25 29 44 18
MM-302432HBC4 $1206 30 24 25 32 42 17
MM-362432HBC4 $1278 36 24 25 32 46 20
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Door/Drawer Color Options Standard TFL Options (see page 6)
3 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
4 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
5 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
6 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130 Three Liners (Q6) + $195 Four Liners (B3F) + $260
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121429HBC4 - LC2 - LC2 - LC2 - NM - T5 - B3F product no exterior drawer drawer lock pull drawer color color edge liner color36.
DescriptionThis base cabinet is available in multiple sizes and has 4 drawers It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14", 18", 24" height 29", 32"
BA
SE C
AB
INE
TS
wall hanging base cabinets doubleWall Hanging Base Cabinet with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301414HBCD $529 30 14 14 5 34 5
MM-361414HBCD $610 36 14 14 5 36 6
MM-301416HBCD $583 30 14 16 38 6
MM-361416HBCD $661 36 14 16 40 7
MM-301429HBCD $688 30 14 29 34 10
MM-361429HBCD $759 36 14 29 36 11
MM-301432HBCD $738 30 14 32 38 11
MM-361432HBCD $803 36 14 32 40 12
MM-301814HBCD $594 30 18 25 14 5 34 7
MM-361814HBCD $657 36 18 25 14 5 36 8
MM-301816HBCD $635 30 18 25 16 38 7
MM-361816HBCD $709 36 18 25 16 40 9
MM-301829HBCD $744 30 18 25 29 34 12
MM-361829HBCD $811 36 18 25 29 36 14
MM-301832HBCD $790 30 18 25 32 38 13
MM-361832HBCD $839 36 18 25 32 40 16
MM-302414HBCD $697 30 24 25 14 5 39 9
MM-362414HBCD $748 36 24 25 14 5 41 10
MM-302416HBCD $731 30 24 25 16 41 9
MM-362416HBCD $795 36 24 25 16 43 11
MM-302429HBCD $831 30 24 25 29 39 16
MM-362429HBCD $899 36 24 25 29 41 18
MM-302432HBCD $886 30 24 25 32 41 17
MM-362432HBCD $928 36 24 25 32 43 20
width 30", 36"Available Sizes depth 14", 18", 24" height 14", 16", 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options (see page 9 for details) None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9 for details) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301414HBCD LC2 - B4A - LC2 - LC2 - RB - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
37.
DescriptionThis base cabinet is available in multiple sizes and has 2 full hinged doors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
BA
SE C
AB
INE
TS
wall hanging base cabinets doubleWall Hanging Base Cabinet with Door/Drawer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301429HBCDD $789 30 14 29 75 10
MM-361429HBCDD $855 36 14 29 80 11
MM-301432HBCDD $840 30 14 32 85 11
MM-361432HBCDD $902 36 14 32 90 12
MM-301829HBCDD $845 30 18 25 29 80 12
MM-361829HBCDD $910 36 18 25 29 85 14
MM-301832HBCDD $893 30 18 25 32 90 13
MM-361832HBCDD $942 36 18 25 32 95 16
MM-302429HBCDD $939 30 24 25 29 80 16
MM-362429HBCDD $1001 36 24 25 29 85 18
MM-302432HBCDD $989 30 24 25 32 90 17
MM-362432HBCDD $1030 36 24 25 32 95 20
width 30", 36"Available Sizes depth 14", 18", 24" height 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-301429HBCDD LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 - Q4 product no exterior interior door/drawer door/drawer shelf hinge lock pull drawer color color color edge color liner
DescriptionThis base cabinet features 1 drawer and 2 hinged doors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options (see page 9 for details) None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 9 for details) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (Top Drawer only, see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
9 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
38.
BA
SE C
AB
INE
TS
wall hanging base cabinets sinkWall Hanging Base Sink
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241829HBSC $599 24 18 25 29 55 10
MM-241832HBSC $648 24 18 25 32 60 11
MM-242429HBSC $665 24 24 25 29 60 13
MM-242432HBSC $715 24 24 25 32 65 14
width 24" Available Sizes depth 18", 24" height 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-241829HBSC LC2 - B4A - LC2 - LC2 - B3K - B3G - NM - T5 product no exterior interior drawer drawer hinge hinge lock pull color color color edge color location
DescriptionThis sink base cabinet is available in multiple sizes and has 1 hinged door It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Location Left (B3K) Right (B3L)
6 Hinge Options (see page 9 for details) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
7 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 9 for details) Crest (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed (B3D) standard
39.
BA
SE C
AB
INE
TS
wall hanging base cabinets double sinkWall Hanging Base Sink
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301829HBSC $659 30 18 25 29 60 12
MM-361829HBSC $705 36 18 25 29 65 14
MM-301832HBSC $720 30 18 25 32 65 13
MM-361832HBSC $774 36 18 25 32 70 16
MM-302429HBSC $712 30 24 25 29 65 16
MM-362429HBSC $748 36 24 25 29 70 18
MM-302432HBSC $775 30 24 25 32 70 17
MM-362432HBSC $823 36 24 25 32 75 20
width 30", 36"Available Sizes depth 18", 24" height 29", 32"
Notes
* Order work surfaces separately (see Work Surfaces section on pages 42-49)
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Drain basket not included when a sink is provided
40.
DescriptionThis base cabinet is available in multiple sizes and has 2 hinged doors It can be installed alone or with multiple base cabinets Work Surfaces (sold separately) are attached to the top of this cabinet
To order, specify product by number and options: 1 2 3 4 5 6 7 Sample Order: MM-301829HBSC LC2 - B4A - LC2 - LC2 - B3G - B3E - B3D product no exterior interior drawer drawer hinge lock pull color color color edge color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Options (see page 9 for details) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
6 Lock Options (see page 9 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
7 Pull Options (see page 9 for details) Crest (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed (B3D) standard
BA
SE C
AB
INE
TS
41.
wall hanging base cabinets fillerBase Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-614BF $82 6 75 14 5 2 1
MM-616BF $87 6 75 16 2 1
MM-629BF $90 6 75 29 3 1
MM-632BF $94 6 75 32 3 1
To order, specify product by number and options: 1 Sample Order: MM-614BF - LC2 product no exterior color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
width 6" corner 8"Available Sizes depth 1" height 14.5" , 16", 29", 32"
DescriptionThis base filler is available in 2 sizes
Corner Base Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-814CBF $91 7 875 75 14 5 2 1
MM-816CBF $98 7 875 75 16 2 1
MM-829CBF $104 7 875 75 29 3 1
MM-832CBF $111 7 875 75 32 3 1
BA
SE C
AB
INE
TS
Notes
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
42.
mile markertm work surfaces
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
WORK SURFACES DESIGN FEATURES
paddle handle faucet
sensor faucetcan create healthier environments and stop the spread of germs by reducing contact inthe restroom.
waste ringis available in black or silver with laminate top and black, silver or integral with solid surface top.
solid surface work surfaces are available in 7 grades and include a 4" high integrated, seamless backsplash.
sinkis available as drop-in ADA with laminate tops. With solid surface tops, you can choose between integral ADA, under mount ADA, and drop-in.Approximate size of sink is 16" x 11.5" x 4.5" Lavatory drain not included with sinks, but required to complete installation.
laminate work surfacesare HPL (High Pressure Laminate) with all Wilsonart Standard HPL colors. A 4" high backsplash is included and requires seams to be sealed at installation.
side splash is 4" high and available left, right or both. Requires seams to be sealed at installation.
Laminate Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-1214TWBL $174 12 14 25 5 6 1
MM-1814TWBL $187 18 14 25 5 9 2
MM-2114TWBL $201 21 14 25 5 11 2
MM-2414TWBL $218 24 14 25 5 12 2
MM-3014TWBL $230 29 5 14 25 5 15 3
MM-3614TWBL $249 36 14 25 5 18 3
MM-4214TWBL $267 42 14 25 5 21 3
MM-4814TWBL $275 48 14 25 5 24 4
MM-5414TWBL $298 54 14 25 5 27 4
MM-6014TWBL $310 60 14 25 5 30 5
MM-6614TWBL $335 66 14 25 5 33 5
MM-7214TWBL $362 72 14 25 5 37 5
MM-7814TWBL $389 78 14 25 5 40 6
MM-8414TWBL $414 84 14 25 5 43 6
MM-9014TWBL $440 90 14 25 5 46 7
MM-9614TWBL $465 96 14 25 5 49 7
MM-10214TWBL $488 102 14 25 5 52 7
MM-10814TWBL $517 108 14 25 5 55 8
MM-11414TWBL $539 114 14 25 5 58 8
MM-12014TWBL $568 120 14 25 5 61 9
MM-12614TWBL $593 126 14 25 5 64 9
MM-13214TWBL $627 132 14 25 5 67 9
MM-13814TWBL $645 138 14 25 5 70 10
MM-14414TWBL $669 144 14 25 5 73 10
work surfaces laminate
DescriptionThis laminate work surface is available in multiple sizes and is 1" thick and has a 4" tall backsplash
To order, specify product by number and options: 1 2 3 4 5 Sample Order: MM-1214TWBL - CHP - FW2 - B5G - B5G - B5U product no laminate edge finished side waste color color edge splash ring
width 12" - 144" 6" incrementsAvailable Sizes depth 14" height 5"
43.
Notes
* For in between sizes, order up a size and cut to meet your specification
* When finished edges are specified, the finished edge will match front edge
* When waste ring option is selected please specify location
WO
RK
SU
RFA
CE
S
Options
1 Laminate Color Options Standard HPL Options (see pages 6-7)
2 Edge Color Options Standard PVC Options (see page 6) Self Edge (WP) standard
3 Finished Edge Options None (X9) standard Left (B5G) standard Right (B5H) standard Both (B5J) standard
4 Side Splash Options None (X9) standard Left (B5G) + $48 Right (B5H) + $48 Both (B5J) + $96 5 Waste Ring Options None (X9) standard Black (B5U) + $81 Silver (B5V) + $81
44.
Laminate Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-1218TWBL $219 12 18 5 5 8 2
MM-1818TWBL $235 18 18 5 5 11 2
MM-2118TWBL $250 21 18 5 5 13 2
MM-2418TWBL $266 24 18 5 5 15 3
MM-3018TWBL $281 29 5 18 5 5 19 3
MM-3618TWBL $297 36 18 5 5 23 4
MM-4218TWBL $312 42 18 5 5 26 4
MM-4818TWBL $328 48 18 5 5 30 5
MM-5418TWBL $343 54 18 5 5 34 5
MM-6018TWBL $359 60 18 5 5 38 6
MM-6618TWBL $384 66 18 5 5 41 6
MM-7218TWBL $410 72 18 5 5 45 7
MM-7818TWBL $437 78 18 5 5 49 7
MM-8418TWBL $462 84 18 5 5 53 8
MM-9018TWBL $488 90 18 5 5 56 8
MM-9618TWBL $513 96 18 5 5 60 9
MM-10218TWBL $539 102 18 5 5 64 9
MM-10818TWBL $565 108 18 5 5 68 10
MM-11418TWBL $591 114 18 5 5 71 10
MM-12018TWBL $616 120 18 5 5 75 11
MM-12618TWBL $642 126 18 5 5 79 11
MM-13218TWBL $667 132 18 5 5 83 12
MM-13818TWBL $694 138 18 5 5 86 12
MM-14418TWBL $719 144 18 5 5 90 13
MM-1224TWBL $235 12 24 5 5 10 2
MM-1824TWBL $255 18 24 5 5 14 3
MM-2124TWBL $271 21 24 5 5 17 3
MM-2424TWBL $286 24 24 5 5 19 3
MM-3024TWBL $316 29 5 24 5 5 24 4
MM-3624TWBL $348 36 24 5 5 29 5
MM-4224TWBL $379 42 24 5 5 33 5
MM-4824TWBL $409 48 24 5 5 38 6
MM-5424TWBL $440 54 24 5 5 43 7
MM-6024TWBL $456 60 24 5 5 48 7
MM-6624TWBL $482 66 24 5 5 52 8
MM-7224TWBL $507 72 24 5 5 57 8
MM-7824TWBL $534 78 24 5 5 62 9
MM-8424TWBL $559 84 24 5 5 67 10
MM-9024TWBL $585 90 24 5 5 71 10
MM-9624TWBL $610 96 24 5 5 76 11
MM-10224TWBL $636 102 24 5 5 81 12
MM-10824TWBL $662 108 24 5 5 86 12
MM-11424TWBL $688 114 24 5 5 90 13
MM-12024TWBL $713 120 24 5 5 95 14
MM-12624TWBL $739 126 24 5 5 100 14
MM-13224TWBL $764 132 24 5 5 105 15
MM-13824TWBL $791 138 24 5 5 109 16
MM-14424TWBL $816 144 24 5 5 114 16
work surfaces laminate
To order, specify product by number and options: 1 2 3 4 5 6 7 Sample Order: MM-1218TWBL - CHP - FW2 - B5G B5G - B5P - B5R - B5U product no laminate edge finished side sink faucet waste color color edge splash ring
Options
1 Laminate Color Options Standard HPL Options (see pages 6-7)
2 Edge Color Options Standard PVC Options (see page 6) Self Edge (WP) standard
3 Finished Edge Options None (X9) standard Left (B5G) standard Right (B5H) standard Both (B5J) standard
4 Side Splash Options None (X9) standard Left (B5G) + $48 Right (B5H) + $48 Both (B5J) + $96 5 Sink Options None (X9) standard Drop-in (B5P) + $804 6 Faucet Options None (X9) standard Paddle Handle (B5R) + $546 Sensor (B5S) + $804 7 Waste Ring Options None (X9) standard Black (B5U) + $81 Silver (B5V) + $81
Notes
* For in between sizes, order up a size and cut to meet your specification
* When finished edges are specified, the finished edge will match front edge
* Sink not available on 12", 18", & 21" width work surfaces
* When sink, faucet, and waste ring options are selected please specify location
* Lavatory drain not included with sinks, but required to complete installation
DescriptionThis laminate work surface is available in multiple sizes and is 1" thick and has a 4" tall backsplash
width 12" - 144" 6" incrementsAvailable Sizes depth 18", 24" height 5"
WO
RK
SUR
FAC
ES
work surfaces laminateLaminate Corner Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-3030CTWBL $290 29 5 29 5 5 25 5
MM-3034CTWBL $337 29 5 34 5 28 5
MM-3040CTWBL $415 29 5 40 5 33 6
MM-3430CTWBL $337 34 29 5 5 28 5
MM-3434CTWBL $385 34 34 5 32 6
MM-3440CTWBL $442 34 40 5 38 7
MM-4030CTWBL $415 40 29 5 5 33 6
MM-4034CTWBL $442 40 34 5 38 7
MM-4040CTWBL $539 40 40 5 44 8
To order, specify product by number and options: 1 2 3 4 Sample Order: MM-3030CTWBL CHP - FW2 - B5G - B5G product no laminate edge finished side color color edge splash
Options
1 Laminate Color Options Standard HPL Options (see pages 6-7)
2 Edge Color Options Standard PVC Options (see page 6) Self Edge (WP) standard 3 Finished Edge Options None (X9) standard Left (B5G) standard Right (B5H) standard Both (B5J) standard
4 Side Splash Options None (X9) standard Left (B5G) + $48 Right (B5H) + $48 Both (B5J) + $96
width 30", 34", 40"Available Sizes depth 30", 34", 40" height 5"
DescriptionThis laminate corner work surface is available in multiple sizes and is 1" thick and has a 4" tall backsplash
Notes
* When finished edges are specified, the finished edge will match front edge
45.
WO
RK
SU
RFA
CE
S
width 12" - 144" 6" incrementsAvailable Sizes depth 14" height 5"
work surfaces solid surface
To order, specify product by number and options: 1 2 3 4 Sample Order: MM-1214TWBS - Bisque 1 - B5J - B5G - B5U product no grade/ finished side waste solid edge splash ring surface
DescriptionThis solid surface work surface is available in multiple sizes and is 1" thick and has a 4" tall backsplash
46.
Solid Surface Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-1214TWBS $453 12 14 25 5 9 1
MM-1814TWBS $472 18 14 25 5 14 2
MM-2114TWBS $489 21 14 25 5 16 2
MM-2414TWBS $530 24 14 25 5 18 2
MM-3014TWBS $551 29 5 14 25 5 23 3
MM-3614TWBS $646 36 14 25 5 27 3
MM-4214TWBS $692 42 14 25 5 32 3
MM-4814TWBS $850 48 14 25 5 37 4
MM-5414TWBS $935 54 14 25 5 41 4
MM-6014TWBS $998 60 14 25 5 46 5
MM-6614TWBS $1074 66 14 25 5 50 5
MM-7214TWBS $1165 72 14 25 5 55 5
MM-7814TWBS $1279 78 14 25 5 59 6
MM-8414TWBS $1375 84 14 25 5 64 6
MM-9014TWBS $1436 90 14 25 5 68 7
MM-9614TWBS $1589 96 14 25 5 73 7
MM-10214TWBS $1642 102 14 25 5 78 7
MM-10814TWBS $1790 108 14 25 5 82 8
MM-11414TWBS $1915 114 14 25 5 87 8
MM-12014TWBS $2047 120 14 25 5 91 9
MM-12614TWBS $2095 126 14 25 5 96 9
MM-13214TWBS $2248 132 14 25 5 100 9
MM-13814TWBS $2344 138 14 25 5 105 10
MM-14414TWBS $2475 144 14 25 5 110 10
Options
1 Grade / Solid Surface Options 7 Grade / Solid Surface Options (see page 7)
2 Finished Edge Options None (X9) standard Left (B5G) + $68 Right (B5H) + $68 Both (B5J) + $136
3 Side Splash Options None (X9) standard Left (B5G) + $142 Right (B5H) + $142 Both (B5J) + $284 4 Waste Ring Options None (X9) standard Integral (B5T) + $56 Black (B5U) + $81 Silver (B5V) + $81
Notes
* For in between sizes, order up a size and cut to meet your specification
* A non-finished edge must be specified if tops are to be hard seamed in field
* When waste ring option is selected please specify location
WO
RK
SUR
FAC
ES
width 12" - 144" 6" incrementsAvailable Sizes depth 18", 24" height 5"
work surfaces solid surface
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-1218TWBS - Bisque 1 - B5J - B5G - B5P - B5R - B5U product no grade/ finished side sink faucet waste solid edge splash ring surface
DescriptionThis solid surface work surface is available in multiple sizes and is 1" thick and has a 4" tall backsplash
47.
Solid Surface Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-1218TWBS $503 12 18 5 5 11 2
MM-1818TWBS $522 18 18 5 5 17 2
MM-2118TWBS $539 21 18 5 5 20 2
MM-2418TWBS $580 24 18 5 5 23 3
MM-3018TWBS $601 29 5 18 5 5 28 3
MM-3618TWBS $696 36 18 5 5 34 4
MM-4218TWBS $742 42 18 5 5 39 4
MM-4818TWBS $959 48 18 5 5 45 5
MM-5418TWBS $1034 54 18 5 5 51 5
MM-6018TWBS $1090 60 18 5 5 56 6
MM-6618TWBS $1176 66 18 5 5 62 6
MM-7218TWBS $1266 72 18 5 5 68 7
MM-7818TWBS $1380 78 18 5 5 73 7
MM-8418TWBS $1472 84 18 5 5 79 8
MM-9018TWBS $1538 90 18 5 5 84 8
MM-9618TWBS $1690 96 18 5 5 90 9
MM-10218TWBS $1740 102 18 5 5 96 9
MM-10818TWBS $1891 108 18 5 5 101 10
MM-11418TWBS $2017 114 18 5 5 107 10
MM-12018TWBS $2127 120 18 5 5 113 11
MM-12618TWBS $2195 126 18 5 5 118 11
MM-13218TWBS $2348 132 18 5 5 124 12
MM-13818TWBS $2444 138 18 5 5 129 12
MM-14418TWBS $2575 144 18 5 5 135 13
MM-1224TWBS $529 12 24 5 5 14 2
MM-1824TWBS $562 18 24 5 5 21 3
MM-2124TWBS $596 21 24 5 5 25 3
MM-2424TWBS $626 24 24 5 5 29 3
MM-3024TWBS $719 29 5 24 5 5 36 4
MM-3624TWBS $908 36 24 5 5 43 5
MM-4224TWBS $1060 42 24 5 5 50 5
MM-4824TWBS $1115 48 24 5 5 57 6
MM-5424TWBS $1217 54 24 5 5 64 7
MM-6024TWBS $1332 60 24 5 5 71 7
MM-6624TWBS $1447 66 24 5 5 78 8
MM-7224TWBS $1563 72 24 5 5 86 8
MM-7824TWBS $1716 78 24 5 5 93 9
MM-8424TWBS $1867 84 24 5 5 100 10
MM-9024TWBS $2020 90 24 5 5 107 10
MM-9624TWBS $2171 96 24 5 5 114 11
MM-10224TWBS $2324 102 24 5 5 121 12
MM-10824TWBS $2475 108 24 5 5 128 12
MM-11424TWBS $2598 114 24 5 5 135 13
MM-12024TWBS $2719 120 24 5 5 143 14
MM-12624TWBS $2841 126 24 5 5 150 14
MM-13224TWBS $2962 132 24 5 5 157 15
MM-13824TWBS $3085 138 24 5 5 164 16
MM-14424TWBS $3206 144 24 5 5 171 16
Options
1 Grade / Solid Surface Options 7 Grade / Solid Surface Options (see page 7)
2 Finished Edge Options None (X9) standard Left (B5G) + $68 Right (B5H) + $68 Both (B5J) + $136
3 Side Splash Options None (X9) standard Left (B5G) + $142 Right (B5H) + $142 Both (B5J) + $284 4 Sink Options None (X9) standard Drop-in (B5P) + $804 Undermount (B5M) + $812 Integral (B5K) + $821 5 Faucet Options None (X9) standard Paddle Handle (B5R) + $546 Sensor (B5S) + $804 6 Waste Ring Options None (X9) standard Integral (B5T) + $56 Black (B5U) + $81 Silver (B5V) + $81
Notes
* For in between sizes, order up a size and cut to meet your specification
* When finished edges are specified, the finished edge will match front edge
* Sink not available on 12", 18", & 21" width work surfaces
* When sink, faucet, and waste ring options are selected please specify location
* Lavatory drain not included with sinks, but required to complete installation
WO
RK
SU
RFA
CE
S
48.
work surfaces solid surfaceSolid Surface Corner Work Surface with Backsplash
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-3030CTWBS $674 29 5 29 5 5 38 5
MM-3034CTWBS $782 29 5 34 5 43 5
MM-3040CTWBS $968 29 5 40 5 50 6
MM-3430CTWBS $782 34 29 5 5 43 5
MM-3434CTWBS $899 34 34 5 48 6
MM-3440CTWBS $1075 34 40 5 57 7
MM-4030CTWBS $968 40 29 5 5 50 6
MM-4034CTWBS $1075 40 34 5 57 7
MM-4040CTWBS $1083 40 40 5 67 8
To order, specify product by number and options: 1 2 3 Sample Order: MM-3030CTWBS - Bisque 1 - B5J - B5G product no grade/ finished side solid edge splash surface
Options
1 Grade / Solid Surface Options 7 Grade / Solid Surface Options (see page 7)
2 Finished Edge Options None (X9) standard Left (B5G) + $68 Right (B5H) + $68 Both (B5J) + $136 3 Side Splash Options None (X9) standard Left (B5G) + $142 Right (B5H) + $142 Both (B5J) + $284
width 30", 34", 40"Available Sizes depth 30, 34", 40" height 5"
DescriptionThis solid surface corner work surface is available in mul-tiple sizes and is 1" thick and has a 4" tall backsplash
Notes
* A non-finished edge must be specified if tops are to be hard seamed in field
WO
RK
SUR
FAC
ES
49.
Support Brackets (Set of 2)1 Right, 1 Left
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-1521SB $149 15 21 2 6 1
work surfaces brackets
To order, specify product by number and options: 1 Sample Order: MM-1521SB - B5W product no color
Options
1 Color Black (B5W) White (B5X) Gray (B5Y) Almond (B5Z)
width 15"Available Sizes depth 21" height 2"
DescriptionThis top support bracket is for use with the work surfaces
WO
RK
SU
RFA
CE
S
50.
mile markertm upper cabinets
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
UPPER CABINET DESIGN FEATURES
adjustable and fixed shelves available for added flexibility.
standard lock
optional keyless lock with combination keypad.
crest pullis available in satin nickel.
forte pullis available in black or satin nickel.
recessed pullis available in satin nickel.
euro 120 hinge
euro knuckle hinge
5 knuckle hinge
era pullis available in black or satin nickel.
flat tops or sloped topsavailable for local codes.
chassisare TFL (Thermally Fused Laminate) with 1MM edge banding. White interiors or matching interiors are available.
51.
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14" height 24", 30" sloped 29", 35"
Upper Cabinet Open Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429UCS $185 12 13 1875 29 40 4
MM-181429UCS $249 18 13 1875 29 45 6
MM-211429UCS $276 21 13 1875 29 50 7
MM-121435UCS $213 12 13 1875 35 45 5
MM-181435UCS $277 18 13 1875 35 50 7
MM-211435UCS $308 21 13 1875 35 55 8
MM-241429UCS $303 24 13 1875 29 55 8
MM-301429UCS $367 30 13 1875 29 60 9
MM-361429UCS $451 36 13 1875 29 65 11
MM-241435UCS $340 24 13 1875 35 60 9
MM-301435UCS $411 30 13 1875 35 65 11
MM-361435UCS $495 36 13 1875 35 70 13
upper cabinets single
To order, specify product by number and options: 1 2 3 4 Sample Order: MM-121424UC - LC2 - B4A - R8 - B4Y product no exterior interior shelf microwave color color shelf
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
4 Microwave Shelf Options None (X9) standard Microwave Shelf (B4Y) + $43
Upper Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121424UC $163 12 13 1875 24 40 4
MM-181424UC $220 18 13 1875 24 45 5
MM-211424UC $244 21 13 1875 24 50 6
MM-121430UC $187 12 13 1875 30 45 4
MM-181430UC $245 18 13 1875 30 50 6
MM-211430UC $274 21 13 1875 30 55 7
MM-241424UC $270 24 13 1875 24 55 6
MM-301424UC $327 30 13 1875 24 60 8
MM-361424UC $402 36 13 1875 24 65 9
MM-241430UC $303 24 13 1875 30 60 8
MM-301430UC $366 30 13 1875 30 65 10
MM-361430UC $443 36 13 1875 30 70 11
Description - Upper Cabinet OpenThis open upper cabinet is available in multiple sizes and has a flat top It can be installed alone or with multiple cabinets
Description - Upper Cabinet Open SlopedThis open upper cabinet is available in multiple sizes and has a sloped top It can be installed alone or with multiple cabinets
B4Y
UP
PE
R C
AB
INE
TS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
52.
Upper Cabinet with Door Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429UCDS $392 12 14 29 45 5
MM-181429UCDS $486 18 14 29 50 6
MM-211429UCDS $527 21 14 29 55 7
MM-121435UCDS $431 12 14 35 50 5
MM-181435UCDS $534 18 14 35 55 7
MM-211435UCDS $580 21 14 35 60 8
upper cabinets single
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121424UCD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 196) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 50 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 50 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Upper Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121424UCD $355 12 14 24 45 4
MM-181424UCD $440 18 14 24 50 5
MM-211424UCD $479 21 14 24 55 6
MM-121430UCD $392 12 14 30 50 5
MM-181430UCD $486 18 14 30 55 6
MM-211430UCD $527 21 14 30 60 7
width 12", 18", 21"Available Sizes depth 14" height 24", 30" sloped 29", 35"
Description - Upper Cabinet with DoorThis upper cabinet is available in multiple sizes and has a flat top and 1 full hinged door It can be installed alone or with multiple cabinets
Description - Upper Cabinet with Door SlopedThis upper cabinet is available in multiple sizes and has a sloped top and 1 full hinged door It can be installed alone or with multiple cabinets
UP
PE
R C
AB
INE
TS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
53.
width 12", 18", 21", 24", 30", 36"Available Sizes depth 14" height 24", 30" sloped 29", 35"
Upper Cabinet with Lift Doors Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121429UCLS $648 12 14 29 45 5
MM-181429UCLS $742 18 14 29 50 6
MM-211429UCLS $783 21 14 29 55 7
MM-121435UCLS $687 12 14 35 50 5
MM-181435UCLS $790 18 14 35 55 7
MM-211435UCLS $836 21 14 35 60 8
MM-241429UCLS $822 24 14 29 60 8
MM-301429UCLS $903 30 14 29 65 10
MM-361429UCLS $1007 36 14 29 70 11
MM-241435UCLS $879 24 14 35 65 9
MM-301435UCLS $968 30 14 35 70 11
MM-361435UCLS $1082 36 14 35 75 14
upper cabinets single
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Lock Options (see page 50 for details) None (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $466
6 Pull Options (see page 50 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Upper Cabinet with Lift Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121424UCL $611 12 14 24 45 4
MM-181424UCL $696 18 14 24 50 5
MM-211424UCL $735 21 14 24 55 6
MM-121430UCL $648 12 14 30 50 5
MM-181430UCL $742 18 14 30 55 6
MM-211430UCL $783 21 14 30 60 7
MM-241424UCL $770 24 14 24 60 7
MM-301424UCL $845 30 14 24 65 8
MM-361424UCL $940 36 14 24 70 10
MM-241430UCL $822 24 14 30 65 8
MM-301430UCL $903 30 14 30 70 10
MM-361430UCL $1007 36 14 30 75 12
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-121424UCL - LC2 - B4A - LC2 - LC2 - NM - T5 product no exterior interior door door edge lock pull color color color color
Description - Upper Cabinet with Lift DoorsThis upper cabinet is available in multiple sizes and has a flat top, 2 lift doors, and 1 stationary shelf It can be installed alone or with multiple cabinets
Description - Upper Cabinet with Lift Doors SlopedThis upper cabinet is available in multiple sizes and has a sloped top, 2 lift doors, and 1 stationary shelf It can be installed alone or with multiple cabinets
UP
PE
R C
AB
INE
TS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
UP
PE
R C
AB
INE
TS
54.
Upper Cabinet with Doors Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241429UCDS $566 24 14 29 60 8
MM-301429UCDS $647 30 14 29 65 10
MM-361429UCDS $751 36 14 29 70 11
MM-241435UCDS $623 24 14 35 65 9
MM-301435UCDS $712 30 14 35 70 11
MM-361435UCDS $826 36 14 35 75 14
Upper Cabinet with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241424UCD $514 24 14 24 60 7
MM-301424UCD $589 30 14 24 65 8
MM-361424UCD $684 36 14 24 70 10
MM-241430UCD $566 24 14 30 65 8
MM-301430UCD $647 30 14 30 70 10
MM-361430UCD $751 36 14 30 75 12Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Hinge Options (see page 50) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 50 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 50 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
upper cabinets double
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-241424UCD - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Description - Upper Cabinet with DoorsThis upper cabinet is available in multiple sizes and has a flat top and 2 full hinged doors It can be installed alone or with multiple cabinets
Description - Upper Cabinet with Doors SlopedThis upper cabinet is available in multiple sizes and has a sloped top and 2 full hinged doors It can be installed alone or with multiple cabinets
width 24", 30", 36"Available Sizes depth 14" height 24", 30" sloped 29", 35"
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 6"Available Sizes depth 14" height 24", 30" sloped 29", 35"
55.
Upper Filler Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-629UFS $125 6 13 1875 29 4 3
MM-635UFS $135 6 13 1875 35 4 3
Upper Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-624UF $95 6 13 1875 24 4 2
MM-630UF $105 6 13 1875 30 4 3
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
upper cabinets filler
To order, specify product by number and options: 1 Sample Order: MM-624UF - LC2 product no exterior color
Description - Upper FillerThis upper filler is available in 2 sizes and has a closed flat top
Description - Upper Filler SlopedThis upper filler is available in 2 sizes and has a closed sloped top
UP
PE
R C
AB
INE
TS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
56.
mile markertm storage cabinets
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
STORAGE CABINET DESIGN FEATURES
optional wardrobe rail
optional coat hook
optional hanging bar
crest pullis available in satin nickel.
forte pullis available in black or satin nickel.
recessed pullis available in satin nickel.
euro 120 hinge
euro knuckle hinge
5 knuckle hinge
lock optionsinclude standard and keyless with combination keypad.
era pullis available in black or satin nickel.
doorsare TFL (Thermally Fused Laminate) with 3 MM PVC edges.
adjustable levelersare included on all storage cabinets for leveling on uneven floors.
chassisare TFL (Thermally Fused Laminate) with 1MM edge banding. White interiors or matching interiors are available.
flat tops or sloped topsavailable for local codes.
adjustable and fixed shelves available for added flexibility.
57.
storage cabinets single
To order, specify product by number and options: 1 2 3 Sample Order: MM-121466SC - LC2 - B4A - A4S product no exterior interior shelf color color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
Storage Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121466SC $474 12 13 1875 66 115 9
MM-151466SC $506 15 13 1875 66 118 11
MM-181466SC $537 18 13 1875 66 120 12
MM-241466SC $607 24 13 1875 66 125 16
MM-121472SC $520 12 13 1875 72 120 10
MM-151472SC $548 15 13 1875 72 123 12
MM-181472SC $576 18 13 1875 72 125 14
MM-241472SC $698 24 13 1875 72 130 17
MM-121478SC $565 12 13 1875 78 125 10
MM-151478SC $623 15 13 1875 78 128 12
MM-181478SC $680 18 13 1875 78 130 15
MM-241478SC $809 24 13 1875 78 135 19
MM-121484SC $660 12 13 1875 84 130 11
MM-151484SC $734 15 13 1875 84 133 13
MM-181484SC $807 18 13 1875 84 135 16
MM-241484SC $920 24 13 1875 84 140 20
MM-121866SC $529 12 17 5 66 120 11
MM-151866SC $564 15 17 5 66 123 14
MM-181866SC $598 18 17 5 66 125 16
MM-241866SC $721 24 17 5 66 130 20
MM-121872SC $580 12 17 5 72 125 12
MM-151872SC $639 15 17 5 72 128 15
MM-181872SC $697 18 17 5 72 130 17
MM-241872SC $860 24 17 5 72 135 22
MM-121878SC $675 12 17 5 78 130 13
MM-151878SC $736 15 17 5 78 133 16
MM-181878SC $797 18 17 5 78 135 19
MM-241878SC $955 24 17 5 78 140 24
MM-121884SC $761 12 17 5 84 135 14
MM-151884SC $833 15 17 5 84 138 17
MM-181884SC $904 18 17 5 84 140 20
MM-241884SC $1126 24 17 5 84 145 26
MM-122466SC $592 12 23 5 66 125 15
MM-152466SC $678 15 23 5 66 128 18
MM-182466SC $763 18 23 5 66 130 21
MM-242466SC $914 24 23 5 66 135 27
MM-122472SC $688 12 23 5 72 130 16
MM-152472SC $774 15 23 5 72 133 19
MM-182472SC $860 18 23 5 72 135 22
MM-242472SC $1055 24 23 5 72 140 29
MM-122478SC $781 12 23 5 78 135 17
MM-152478SC $852 15 23 5 78 138 21
MM-182478SC $922 18 23 5 78 140 24
MM-242478SC $1110 24 23 5 78 145 31
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top open storage cabinet is available in multiple sizes and has 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
width 12", 15", 18", 24", 30", 36"Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
continued on next page
STO
RA
GE
CA
BIN
ETS
58.
storage cabinets single (cont.)
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24", 30", 36"Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
DescriptionThis flat top open storage cabinet is available in multiple sizes and has 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Storage Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-122484SC $876 12 23 5 84 140 18
MM-152484SC $964 15 23 5 84 143 22
MM-182484SC $1052 18 23 5 84 145 26
MM-242484SC $1252 24 23 5 84 150 33
MM-301466SC $818 30 13 1875 66 135 20
MM-361466SC $905 36 13 1875 66 145 23
MM-301472SC $956 30 13 1875 72 140 21
MM-361472SC $987 36 13 1875 72 150 25
MM-301478SC $1024 30 13 1875 78 145 23
MM-361478SC $1078 36 13 1875 78 155 27
MM-301484SC $1056 30 13 1875 84 150 25
MM-361484SC $1159 36 13 1875 84 160 29
MM-301866SC $1002 30 17 5 66 150 25
MM-361866SC $1185 36 17 5 66 160 30
MM-301872SC $1098 30 17 5 72 155 27
MM-361872SC $1217 36 17 5 72 165 32
MM-301878SC $1180 30 17 5 78 160 29
MM-361878SC $1252 36 17 5 78 170 35
MM-301884SC $1209 30 17 5 84 165 32
MM-361884SC $1301 36 17 5 84 175 37
MM-302466SC $1212 30 23 5 66 165 33
MM-362466SC $1310 36 23 5 66 175 39
MM-302472SC $1244 30 23 5 72 170 35
MM-362472SC $1370 36 23 5 72 180 42
MM-302478SC $1316 30 23 5 78 175 38
MM-362478SC $1405 36 23 5 78 185 45
MM-302484SC $1365 30 23 5 84 180 41
MM-362484SC $1448 36 23 5 84 190 49
To order, specify product by number and options: 1 2 3 Sample Order: MM-301466SC - LC2 - B4A - A4S product no exterior interior shelf color color
STOR
AG
E C
AB
INE
TS
59.
storage cabinets double sided
To order, specify product by number and options: 1 2 3 Sample Order: MM-121466DSSC - LC2 - B4A - A4S product no exterior interior shelf color color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Coat Hooks (A4S) + $44 Three Adjustable Shelves (R8) + $283 Three Fixed Shelves (B3N) + $283
Double Sided Storage Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121866DSSC $582 12 18 66 120 12
MM-151866DSSC $620 15 18 66 125 14
MM-181866DSSC $658 18 18 66 130 16
MM-241866DSSC $793 24 18 66 140 21
MM-122466DSSC $652 12 24 66 135 15
MM-152466DSSC $745 15 24 66 140 18
MM-182466DSSC $839 18 24 66 145 21
MM-242466DSSC $1005 24 24 66 155 27
MM-121872DSSC $640 12 18 72 125 12
MM-151872DSSC $704 15 18 72 120 15
MM-181872DSSC $767 18 18 72 155 23
MM-241872DSSC $946 24 18 72 145 23
MM-122472DSSC $757 12 24 72 140 16
MM-152472DSSC $851 15 24 72 145 19
MM-182472DSSC $946 18 24 72 150 23
MM-242472DSSC $1161 24 24 72 160 29
MM-121878DSSC $743 12 18 78 130 13
MM-151878DSSC $809 15 18 78 135 16
MM-181878DSSC $876 18 18 78 140 19
MM-241878DSSC $1051 24 18 78 150 25
MM-122478DSSC $859 12 24 78 145 17
MM-152478DSSC $937 15 24 78 150 21
MM-182478DSSC $1014 18 24 78 155 25
MM-242478DSSC $1221 24 24 78 165 32
MM-121884DSSC $837 12 18 84 135 14
MM-151884DSSC $916 15 18 84 140 17
MM-181884DSSC $994 18 18 84 145 20
MM-241884DSSC $1239 24 18 84 155 26
MM-122484DSSC $964 12 24 84 150 19
MM-152484DSSC $1061 15 24 84 155 22
MM-182484DSSC $1157 18 24 84 160 26
MM-242484DSSC $1377 24 24 84 170 34
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top open storage cabinet is available in multiple sizes and has 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
width 12", 15", 18", 24"Available Sizes depth 18", 24" height 66", 72", 78", 84"
continued on next page
STO
RA
GE
CA
BIN
ETS
60.
STO
RA
GE
CA
BIN
ETS
storage cabinets single
To order, specify product by number and options: 1 2 3 Sample Order: MM-121471SCS - LC2 - B4A - A4S product no exterior interior shelf color color
Storage Cabinet Open Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121471SCS $521 12 13 1875 71 115 9
MM-151471SCS $555 15 13 1875 71 118 11
MM-181471SCS $589 18 13 1875 71 120 13
MM-241471SCS $655 24 13 1875 71 125 17
MM-121477SCS $569 12 13 1875 77 120 10
MM-151477SCS $596 15 13 1875 77 123 12
MM-181477SCS $622 18 13 1875 77 125 14
MM-241477SCS $748 24 13 1875 77 130 19
MM-121483SCS $613 12 13 1875 83 125 11
MM-151483SCS $671 15 13 1875 83 128 13
MM-181483SCS $728 18 13 1875 83 130 15
MM-241483SCS $845 24 13 1875 83 135 20
MM-121489SCS $712 12 13 1875 89 130 12
MM-151489SCS $784 15 13 1875 89 133 14
MM-181489SCS $855 18 13 1875 89 135 16
MM-241489SCS $969 24 13 1875 89 140 21
MM-121872SCS $573 12 17 5 72 5 120 12
MM-151872SCS $609 15 17 5 72 5 123 15
MM-181872SCS $644 18 17 5 72 5 125 17
MM-241872SCS $771 24 17 5 72 5 130 22
MM-121878SCS $626 12 17 5 78 5 125 13
MM-151878SCS $686 15 17 5 78 5 128 16
MM-181878SCS $745 18 17 5 78 5 130 19
MM-241878SCS $909 24 17 5 78 5 135 24
MM-121884SCS $720 12 17 5 84 5 130 14
MM-151884SCS $784 15 17 5 84 5 133 17
MM-181884SCS $848 18 17 5 84 5 135 20
MM-241884SCS $1007 24 17 5 84 5 140 26
MM-121890SCS $811 12 17 5 90 5 135 15
MM-151890SCS $882 15 17 5 90 5 138 18
MM-181890SCS $952 18 17 5 90 5 140 21
MM-241890SCS $1170 24 17 5 90 5 145 28
MM-122474SCS $645 12 23 5 74 5 125 16
MM-152474SCS $728 15 23 5 74 5 128 20
MM-182474SCS $810 18 23 5 74 5 130 23
MM-242474SCS $964 24 23 5 74 5 135 30
MM-122480SCS $735 12 23 5 80 5 130 18
MM-152480SCS $824 15 23 5 80 5 133 21
MM-182480SCS $912 18 23 5 80 5 135 25
MM-242480SCS $1110 24 23 5 80 5 140 32
MM-122486SCS $831 12 23 5 86 5 135 19
MM-152486SCS $901 15 23 5 86 5 138 23
MM-182486SCS $970 18 23 5 86 5 140 27
MM-242486SCS $1159 24 23 5 86 5 145 34
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24", 30", 36"Available Sizes depth 14", 18", 24" height 71" - 92.5"
DescriptionThis sloped top open storage cabinet is available in multiple sizes and has 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
continued on next page
61.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24", 30", 36"Available Sizes depth 14" 18" 24" height 71" - 92.5"
DescriptionThis sloped top open storage cabinet is available in multiple sizes and has 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
To order, specify product by number and options: 1 2 3 Sample Order: MM-301471SCS - LC2 - B4A - A4S product no exterior interior shelf color color
storage cabinets single (cont.)Storage Cabinet Open Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-122492SCS $926 12 23 5 92 5 140 20
MM-152492SCS $1015 15 23 5 92 5 143 24
MM-182492SCS $1104 18 23 5 92 5 145 28
MM-242492SCS $1302 24 23 5 92 5 150 37
MM-301471SCS $868 30 13 1875 71 135 21
MM-361471SCS $954 36 13 1875 71 145 25
MM-301477SCS $1006 30 13 1875 77 140 23
MM-361477SCS $1037 36 13 1875 77 150 27
MM-301483SCS $1074 30 13 1875 83 145 24
MM-361483SCS $1128 36 13 1875 83 155 29
MM-301489SCS $1109 30 13 1875 89 150 26
MM-361489SCS $1210 36 13 1875 89 160 31
MM-301872SCS $1054 30 17 5 72 5 150 27
MM-361872SCS $1235 36 17 5 72 5 160 32
MM-301878SCS $1148 30 17 5 78 5 155 30
MM-361878SCS $1267 36 17 5 78 5 165 35
MM-301884SCS $1229 30 17 5 84 5 160 30
MM-361884SCS $1302 36 17 5 84 5 170 36
MM-301890SCS $1258 30 17 5 90 5 165 32
MM-361890SCS $1351 36 17 5 90 5 175 38
MM-302474SCS $1262 30 23 5 74 5 165 37
MM-362474SCS $1359 36 23 5 74 5 175 43
MM-302480SCS $1294 30 23 5 80 5 170 39
MM-362480SCS $1420 36 23 5 80 5 180 47
MM-302486SCS $1363 30 23 5 86 5 175 42
MM-362486SCS $1456 36 23 5 86 5 185 50
MM-302492SCS $1415 30 23 5 92 5 180 45
MM-362492SCS $1498 36 23 5 92 5 190 53
STOR
AG
E C
AB
INE
TS
62.
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
storage cabinets single
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121466SCD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Storage Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121466SCD $621 12 14 66 120 9
MM-151466SCD $655 15 14 66 123 11
MM-181466SCD $689 18 14 66 125 13
MM-241466SCD $755 24 14 66 130 17
MM-121472SCD $669 12 14 72 125 10
MM-151472SCD $696 15 14 72 128 12
MM-181472SCD $722 18 14 72 130 14
MM-241472SCD $848 24 14 72 135 18
MM-121478SCD $713 12 14 78 130 11
MM-151478SCD $771 15 14 78 133 13
MM-181478SCD $828 18 14 78 135 15
MM-241478SCD $945 24 14 78 140 20
MM-121484SCD $812 12 14 84 135 12
MM-151484SCD $884 15 14 84 138 14
MM-181484SCD $955 18 14 84 140 16
MM-241484SCD $1069 24 14 84 145 21
MM-121866SCD $673 12 18 25 66 125 12
MM-151866SCD $709 15 18 25 66 128 14
MM-181866SCD $744 18 18 25 66 130 16
MM-241866SCD $871 24 18 25 66 135 21
MM-121872SCD $726 12 18 25 72 130 13
MM-151872SCD $786 15 18 25 72 133 15
MM-181872SCD $845 18 18 25 72 135 18
MM-241872SCD $1009 24 18 25 72 140 23
MM-121878SCD $820 12 18 25 78 135 14
MM-151878SCD $884 15 18 25 78 138 16
MM-181878SCD $948 18 18 25 78 140 19
MM-241878SCD $1107 24 18 25 78 145 25
MM-121884SCD $914 12 18 25 84 140 15
MM-151884SCD $983 15 18 25 84 143 18
MM-181884SCD $1052 18 18 25 84 145 21
MM-241884SCD $1275 24 18 25 84 150 27
MM-122466SCD $746 12 24 25 66 130 15
MM-152466SCD $828 15 24 25 66 133 18
MM-182466SCD $910 18 24 25 66 135 21
MM-242466SCD $1064 24 24 25 66 140 27
MM-122472SCD $835 12 24 25 72 135 16
MM-152472SCD $924 15 24 25 72 138 20
MM-182472SCD $1012 18 24 25 72 140 23
MM-242472SCD $1213 24 24 25 72 145 30
MM-122478SCD $931 12 24 25 78 140 18
MM-152478SCD $1003 15 24 25 78 143 21
MM-182478SCD $1075 18 24 25 78 145 25
MM-242478SCD $1259 24 24 25 78 150 32
MM-122484SCD $1026 12 24 25 84 145 19
MM-152484SCD $1115 15 24 25 84 148 23
MM-182484SCD $1204 18 24 25 84 150 27
MM-242484SCD $1405 24 24 25 84 155 34
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top storage cabinet is available in multiple sizes and has 1 full hinged door, 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
STO
RA
GE
CA
BIN
ETS
63.
width 12", 15", 18", 24" Available Sizes depth 18", 24" height 66", 72", 78", 84"
storage cabinets double sided
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-121466DSSCD- LC2 - B4A - LC2 - LC2 - R8 - B3K - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $44 Three Adjustable Shelves (R8) + $283 Three Fixed Shelves (B3N) + $283
6 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $62 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $552
8 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Double Sided Storage Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121866DSSCD $740 12 19 625 66 135 12
MM-151866DSSCD $779 15 19 625 66 140 15
MM-181866DSSCD $818 18 19 625 66 145 18
MM-241866DSSCD $958 24 19 625 66 155 23
MM-122466DSSCD $821 12 25 625 66 145 16
MM-152466DSSCD $911 15 25 625 66 150 19
MM-182466DSSCD $1001 18 25 625 66 155 22
MM-242466DSSCD $1170 24 25 625 66 165 29
MM-121872DSSCD $799 12 19 625 72 140 13
MM-151872DSSCD $865 15 19 625 72 145 16
MM-181872DSSCD $930 18 19 625 72 150 19
MM-241872DSSCD $1110 24 19 625 72 160 25
MM-122472DSSCD $919 12 25 625 72 145 17
MM-152472DSSCD $1016 15 25 625 72 150 21
MM-182472DSSCD $1113 18 25 625 72 155 24
MM-242472DSSCD $1334 24 25 625 72 165 31
MM-121878DSSCD $902 12 19 625 78 140 15
MM-151878DSSCD $972 15 19 625 78 145 18
MM-181878DSSCD $1043 18 19 625 78 150 21
MM-241878DSSCD $1218 24 19 625 78 160 27
MM-122478DSSCD $1024 12 25 625 78 140 18
MM-152478DSSCD $1103 15 25 625 78 145 22
MM-182478DSSCD $1183 18 25 625 78 150 26
MM-242478DSSCD $1385 15 25 625 78 160 34
MM-121884DSSCD $1005 12 19 625 84 150 16
MM-151884DSSCD $1081 15 19 625 84 155 19
MM-181884DSSCD $1157 18 19 625 84 160 22
MM-241884DSSCD $1403 24 19 625 84 170 28
MM-122484DSSCD $1129 12 25 625 84 155 20
MM-152484DSSCD $1227 15 25 625 84 160 24
MM-182484DSSCD $1324 18 25 625 84 165 28
MM-242484DSSCD $1546 24 25 625 84 175 21
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top storage cabinet is available in multiple sizes and has 1 full hinged door, 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
STO
RA
GE
CA
BIN
ETS
64.
storage cabinets single
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-121471SCDS - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Storage Cabinet with Door Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121471SCDS $671 12 14 71 120 10
MM-151471SCDS $705 15 14 71 123 12
MM-181471SCDS $739 18 14 71 125 14
MM-241471SCDS $805 24 14 71 130 18
MM-121477SCDS $714 12 14 77 125 11
MM-151477SCDS $743 15 14 77 128 13
MM-181477SCDS $772 18 14 77 130 15
MM-241477SCDS $898 24 14 77 135 20
MM-121483SCDS $763 12 14 83 130 12
MM-151483SCDS $819 15 14 83 133 14
MM-181483SCDS $875 18 14 83 135 16
MM-241483SCDS $990 24 14 83 140 21
MM-121489SCDS $862 12 14 89 135 12
MM-151489SCDS $934 15 14 89 138 15
MM-181489SCDS $1005 18 14 89 140 17
MM-241489SCDS $1114 24 14 89 145 22
MM-121872SCDS $723 12 18 25 72 5 125 13
MM-151872SCDS $761 15 18 25 72 5 128 15
MM-181872SCDS $798 18 18 25 72 5 130 18
MM-241872SCDS $921 24 18 25 72 5 135 23
MM-121878SCDS $776 12 18 25 78 5 130 14
MM-151878SCDS $836 15 18 25 78 5 133 17
MM-181878SCDS $895 18 18 25 78 5 135 19
MM-241878SCDS $1059 24 18 25 78 5 140 25
MM-121884SCDS $870 12 18 25 84 5 135 15
MM-151884SCDS $932 15 18 25 84 5 138 18
MM-181884SCDS $993 18 18 25 84 5 140 21
MM-241884SCDS $1157 24 18 25 84 5 145 27
MM-121890SCDS $964 12 18 25 90 5 140 16
MM-151890SCDS $1033 15 18 25 90 5 143 19
MM-181890SCDS $1102 18 18 25 90 5 145 22
MM-241890SCDS $1325 24 18 25 90 5 150 29
MM-122474SCDS $796 12 24 25 74 5 130 17
MM-152474SCDS $878 15 24 25 74 5 133 20
MM-182474SCDS $960 18 24 25 74 5 135 24
MM-242474SCDS $1094 24 24 25 74 5 140 31
MM-122480SCDS $885 12 24 25 80 5 135 18
MM-152480SCDS $974 15 24 25 80 5 138 22
MM-182480SCDS $1062 18 24 25 80 5 140 26
MM-242480SCDS $1263 24 24 25 80 5 145 33
MM-122486SCDS $981 12 24 25 86 5 140 19
MM-152486SCDS $1053 15 24 25 86 5 143 23
MM-182486SCDS $1125 18 24 25 86 5 145 27
MM-242486SCDS $1309 24 24 25 86 5 150 35
MM-122492SCDS $1076 12 24 25 92 5 145 21
MM-152492SCDS $1170 15 24 25 92 5 148 25
MM-182492SCDS $1264 18 24 25 92 5 150 29
MM-242492SCDS $1452 24 24 25 92 5 155 38
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 71" - 92.5"
DescriptionThis sloped top storage cabinet is available in multiple sizes and has 1 full hinged door, 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
Storage Cabinet with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301466SCD $1271 30 14 66 140 21
MM-361466SCD $1339 36 14 66 150 24
MM-301472SCD $1319 30 14 72 145 22
MM-361472SCD $1372 36 14 72 155 27
MM-301478SCD $1363 30 14 78 150 24
MM-361478SCD $1498 36 14 78 160 29
MM-301484SCD $1462 30 14 84 155 26
MM-361484SCD $1605 36 14 84 165 31
MM-301866SCD $1323 30 18 25 66 155 26
MM-361866SCD $1394 36 18 25 66 165 31
MM-301872SCD $1376 30 18 25 72 160 28
MM-361872SCD $1495 36 18 25 72 170 33
MM-301878SCD $1470 30 18 25 78 165 31
MM-361878SCD $1599 36 18 25 78 175 36
MM-301884SCD $1564 30 18 25 84 170 33
MM-361884SCD $1702 36 18 25 84 180 39
MM-302466SCD $1398 30 24 25 66 170 34
MM-362466SCD $1559 36 24 25 66 180 40
MM-302472SCD $1487 30 24 25 72 175 36
MM-362472SCD $1665 36 24 25 72 185 43
MM-302478SCD $1581 30 24 25 78 180 39
MM-362478SCD $1723 36 24 25 78 190 47
MM-302484SCD $1788 30 24 25 84 185 42
MM-362484SCD $1854 36 24 25 84 195 50
65.
width 30", 36" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
storage cabinets double
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301466SCD - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67
Hanging Bar (R7) available on 24" deep models + $33
Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top storage cabinet is available in multiple sizes and has 2 full hinged doors, 1 stationary shelf, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
STO
RA
GE
CA
BIN
ETS
66.
width 30", 36" Available Sizes depth 14", 18", 24" height 71" - 92.5"
storage cabinets double
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301471SCDS - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Storage Cabinet with Doors Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301471SCDS $1321 30 14 71 140 22
MM-361471SCDS $1389 36 14 71 150 26
MM-301477SCDS $1369 30 14 77 145 24
MM-361477SCDS $1422 36 14 77 155 28
MM-301483SCDS $1413 30 14 83 150 26
MM-361483SCDS $1548 36 14 83 160 30
MM-301489SCDS $1512 30 14 89 155 27
MM-361489SCDS $1655 36 14 89 165 33
MM-301872SCDS $1373 30 18 25 72 5 155 28
MM-361872SCDS $1444 36 18 25 72 5 165 34
MM-301878SCDS $1426 30 18 25 78 5 160 31
MM-361878SCDS $1545 36 18 25 78 5 170 36
MM-301884SCDS $1520 30 18 25 84 5 165 33
MM-361884SCDS $1649 36 18 25 84 5 175 39
MM-301890SCDS $1614 30 18 25 90 5 165 35
MM-361890SCDS $1752 36 18 25 90 5 175 42
MM-302474SCDS $1448 30 24 25 74 5 170 38
MM-362474SCDS $1609 36 24 25 74 5 180 45
MM-302480SCDS $1537 30 24 25 80 5 175 41
MM-362480SCDS $1715 36 24 25 80 5 185 48
MM-302486SCDS $1631 30 24 25 86 5 180 44
MM-362486SCDS $1773 36 24 25 86 5 190 52
MM-302492SCDS $1838 30 24 25 92 5 185 46
MM-362492SCDS $1904 36 24 25 92 5 195 55
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67
Hanging Bar (R7) available on 24" deep models + $33
Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis sloped top storage cabinet is available in multiple sizes and has 2 full hinged doors, 1 stationary shelf , a 4" recessed toe kick and adjustable levelers for installa-tion on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
67.
width 6" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
storage cabinets filler
To order, specify product by number and options: 1 Sample Order: MM-61466SF - LC2 product no color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
Storage Filler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-61466SF $178 6 13 1875 66 6 5
MM-61472SF $188 6 13 1875 72 6 6
MM-61478SF $198 6 13 1875 78 6 6
MM-61484SF $208 6 13 1875 84 6 7
MM-61866SF $185 6 17 5 66 6 7
MM-61872SF $195 6 17 5 72 6 7
MM-61878SF $205 6 17 5 78 6 8
MM-61884SF $215 6 17 5 84 6 8
MM-62466SF $193 6 23 5 66 6 9
MM-62472SF $203 6 23 5 72 6 9
MM-62478SF $213 6 23 5 78 6 10
MM-62484SF $223 6 23 5 84 6 11
DescriptionThis storage filler has a closed flat top and is available in 12 sizes
STO
RA
GE
CA
BIN
ETS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
68.
width 6" Available Sizes depth 14", 18", 24" height 71" - 92"
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
Storage Filler Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-61471SFS $188 6 13 1875 71 6 6
MM-61477SFS $198 6 13 1875 77 6 6
MM-61483SFS $208 6 13 1875 83 6 6
MM-61489SFS $218 6 13 1875 89 6 7
MM-61872SFS $195 6 17 5 72 6 7
MM-61878SFS $205 6 17 5 78 6 8
MM-61884SFS $215 6 17 5 84 6 8
MM-61890SFS $225 6 17 5 90 6 9
MM-62474SFS $193 6 23 5 74 6 10
MM-62480SFS $203 6 23 5 80 6 10
MM-62486SFS $213 6 23 5 86 6 11
MM-62492SFS $223 6 23 5 92 6 12
storage cabinets filler
To order, specify product by number and options: 1 Sample Order: MM-61471SFS - LC2 product no color
DescriptionThis storage filler has a closed sloped top and is available in 12 sizes
STOR
AG
E C
AB
INE
TS
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
69.
width 21", 24" Available Sizes depth 18" height 45"
Media Cabinet Magazine
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845MCM $1175 21 17 625 45 100 13
MM-241845MCM $1195 24 17 625 45 100 14
storage cabinets media
To order, specify product by number and options: 1 2 Sample Order: MM-211845MC - LC2 - BSQ product no color top color
Media Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845MC $1125 21 17 625 45 100 13
MM-241845MC $1145 24 17 625 45 100 14
Description - Media Cabinet OpenThis open media cabinet is available in 2 sizes and has a DVD/magazine rail, a swing out flat panel TV mount, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Description - Media Cabinet MagazineThis magazine media cabinet is available in 2 sizes and has 3 DVD/magazine rails, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
70.
width 21", 24" Available Sizes depth 18" height 45"
Media Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845MCD $1275 21 18 25 45 100 13
MM-241845MCD $1295 24 18 25 45 100 15
storage cabinets media
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-211845MCD - LC2 - LC2 - B3K - B3G - NM - T5 product no color top hinge hinge lock pull color location
DescriptionThis media cabinet is available in 2 sizes and has a DVD/magazine rail, a swing out flat panel TV mount, 1 hinged door, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Location Left (B3K) Right (B3L)
6 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
71.
width 21", 24" Available Sizes depth 18", 24" height 45"
Double Sided Media Cabinet Magazine
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845DSMCM $1351 21 25 18 25 45 110 13
MM-241845DSMCM $1374 24 25 18 25 45 120 15
MM-212445DSMCM $1419 21 25 24 25 45 120 17
MM-242445DSMCM $1443 24 25 24 25 45 130 19
storage cabinets double sided media
To order, specify product by number and options: 1 2 Sample Order: MM-211845DSMC - LC2 - BSQ product no color top color
Double Sided Media Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845DSMC $1294 21 25 18 25 45 110 13
MM-241845DSMC $1317 24 25 18 25 45 120 15
MM-212445DSMC $1359 21 25 24 25 45 120 17
MM-242445DSMC $1383 24 25 24 25 45 130 19
Description - Media Cabinet OpenThis open media cabinet is available in 4 sizes and has a DVD/magazine rail on each side, a swing out flat panel TV mount per side, a 4" recessed toe kick and adjust-able levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Description - Media Cabinet MagazineThis magazine media cabinet is available in 4 sizes and has 3 DVD/magazine rails per side, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
72.
width 21", 24" Available Sizes depth 18", 24" height 45"
Double Sided Media Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-211845DSMCD $1466 21 25 19 625 45 115 14
MM-241845DSMCD $1489 24 25 19 625 45 125 16
MM-212445DSMCD $1539 21 25 25 625 45 125 18
MM-242445DSMCD $1563 24 25 25 625 45 135 20
storage cabinets double sided media
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-211845DSMCD- LC2 - LC2 - B3K - B3G - NM - T5 product no color top hinge hinge lock pull color location
DescriptionThis media cabinet is available in 4 sizes and has a DVD/magazine rail on each side, a swing out flat panel TV mount per side, 1 hinged door per side, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
6 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $62 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $552
7 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
73.
width 33", 39" Available Sizes depth 24" height 37"
storage cabinets media nurse server
To order, specify product by number and options: 1 2 3 4 5 Sample Order: MM-331837MNS - LC2 - BSQ - NL - T5 - Q3 product no color top lock pull drawer color liner
Media Nurse Server Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-332337MNS $1883 32 5 23 37 120 20
MM-392337MNS $2014 38 5 23 37 125 23
DescriptionThis nurse server is available in 2 sizes and has oneDVD/magazine rail on each side, one swing out flat panel TV mount per side, one drawer, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $284
3 Drawer Color Options Standard TFL Options (see page 6)
4 Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
6 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
7 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
74.
width 33", 39" Available Sizes depth 24"
height 37"
Media Nurse Server with 3 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBICFT
32 5 23 37 140 20MM-332337MNS3 $2678
MM-392337MNS3 $2865 38 5 23 37 145 23
storage cabinets media nurse server
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-331837MNSDD- LC2 - LC2 - LC2 - LC2 - B3K - NL - T5 - Q3
product no color top drawer drawer hinge lock pull drawer color color edge location liner
DescriptionThese nurse servers are available in 2 sizes per style and have either 3 drawers, 4 drawers or a door and drawer, with DVD/magazine rail on each side, one swing out flat panel TV mount per side, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Top Color Options Standard TFL Options (see page 6) standard7 Grade / Solid Surface Options (see page 7) + $284
3 Door/Drawer Color OptionsStandard TFL Options (see page 6)
4 Door/Drawer Edge Color OptionsStandard 3MM PVC Color Options (see page 6)
5 Hinge Location (Door and Drawer Model Only)Left (B3K)Right (B3L)
6 Lock Options (see page 56 for details)No Lock (NL) standardStandard Lock (NM) + 31Key Specific Lock (H2X) + $31Keyless Lock (B3E) + $276
7 Pull Options (see page 56 for details)Crest Satin Nickel (T5) standard Era Black (VJ) standardEra Satin Nickel (VK) standardForte Black (VG) standardForte Satin Nickel (VH) standardRecessed Satin Nickel (B3D) standard
8 Removable Drawer LinersNone (Q3) standard One Liner (Q4) + $65Two Liners (Q5) + $130Three Liners (Q6) + $195Four Liners (B3F) + $260
Notes
* Cove molding is necessary to meet infection controlrequirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to beanchored to a wall or floor Hardware is not included with cabinets
Media Nurse Server with 4 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBICFT
MM-332337MNS4 $2915 32 5 23 37 150 20
MM-393337MNS4 $3119 38 5 23 37 155 23
Media Nurse Server with Door and Drawer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBICFT
MM-332337MNSDD $1982 32 5 23 37 125 20
MM-392337MNSDD $2120 38 5 23 37 130 23
75.
width 12", 15", 18", 24" Available Sizes depth 18", 24" height 45"
Double Sided Storage Server Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121845DSSS $722 12 25 18 25 45 70 8
MM-151845DSSS $745 15 25 18 25 45 75 10
MM-181845DSSS $796 18 25 18 25 45 80 12
MM-241845DSSS $854 24 25 18 25 45 90 15
MM-122445DSSS $752 12 25 24 25 45 90 11
MM-152445DSSS $776 15 25 24 25 45 100 13
MM-182445DSSS $824 18 25 24 25 45 110 15
MM-242445DSSS $888 24 25 24 25 45 130 19
storage cabinets double sided server
To order, specify product by number and options: 1 2 Sample Order: MM-121845DSSS - LC2 - LC2 product no color top color
DescriptionThis storage server cabinet is available in 8 sizes and has two stationary shelves per side, a 4" recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Standard TFL Options (see page 6)
3 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
76.
width 21", 15, 18", 24" Available Sizes depth 18", 24" height 45"
storage cabinets double sided serverDouble Sided Storage Server with Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121845DSSSD $871 12 25 19 625 45 80 9
MM-151845DSSSD $895 15 25 19 625 45 85 11
MM-181845DSSSD $947 18 25 19 625 45 90 12
MM-241845DSSSD $1006 24 25 19 625 45 100 16
MM-122445DSSSD $903 12 25 25 625 45 100 11
MM-152445DSSSD $926 15 25 25 625 45 110 13
MM-182445DSSSD $975 18 25 25 625 45 120 16
MM-242445DSSSD $1039 24 25 25 625 45 140 20
This storage server cabinet is available in 8 sizes and has two stationary shelves per side, one door per side, a 4" recessed toe kick and adjustable levelers for installa-tion on uneven floors It can be installed alone or with multiple cabinets
STO
RA
GE
CA
BIN
ETS
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Standard TFL Options (see page 6)
3 Top Color Options Standard TFL Options (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
4 Door Color Options Standard TFL Options (see page 6)
5 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
6 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $72
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $62 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $552
8 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-121845DSSSD- LC2 - LC2 - LC2 - LC2 - LC2 - B3G - NL - T5 product no exterior interior top door door hinge lock pull color color color color edge option option option
77.
width 21" Available Size depth 13" height 13"
storage cabinets bedsideBedside Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-201313BC $349 20 25 13 13 30 3
DescriptionThis hanging bedside cabinet includes attachment hardware
STO
RA
GE
CA
BIN
ETS
To order, specify product by number and options: 1 2 3 4 5 6 Sample Order: MM-201313BC - LC2 - LC2 - B3N - BSQ - B6D - X9 product no color interior shelf top spill backsplash color color groove
Options
1 Exterior Chassis Color Options
Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Shelf Options (see page 9 for details) None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
4 Top Color Options Standard TFL Options (see page 6) standard Standard 3DL Options (use with B6D spill groove option) (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
5 Spill Groove Options None (X9) standard Spill Groove (B6D) + $65
6 Backsplash Options None (X9) standard Backsplash (B6E) + $142
Notes
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Spill groove option is not available on the following colors: Wallaby & Slate Grey
78.
Bedside Cabinet w/Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-201313BCD $449 20 25 13 13 30 3
STOR
AG
E C
AB
INE
TS
78.
width 21" Available Size depth 13" height 13"
storage cabinets bedside
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 10 11 12 Sample Order: MM-201313BCD - LC2 - LC2 - LC2 - LC2 - B3N - B5J - B6D - B6E - B3K - B3H - NM - T5 product no color interior door door edge shelf top spill backsplash hinge hinge lock pull color color color color groove location
DescriptionThis hanging bedside cabinet has 1 hinged door and includes attachment hardware
Options
1 Exterior Chassis Color Options
Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6)
5 Shelf Options (see page 9 for details) None (X9) standard Fixed Shelf (B3N) + $71 Adjustable Shelf (R8) + $71
6 Top Color Options Standard TFL Options (see page 6) standard Standard 3DL Options (use with B6D spill groove option (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
7 Spill Groove Options None (X9) standard Spill Groove (B6D) + $65
8 Backsplash Options None (X9) standard Backsplash (B6E) + $142
9 Hinge Location Left (B3K) Right (B3L)
10 Hinge Options (see page 56) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
11 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276 12 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Spill groove option is not available on the following colors: Wallaby & Slate Grey
Bedside Cabinet w/2 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-201313BC2 $749 20 25 13 13 30 3
79.
width 21" Available Size depth 13" height 13"
storage cabinets bedside
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-201313BC2 - LC2 - LC2 - LC2 - BSQ - B6D - B6E - NM - T5 - Q5 product no exterior drawer drawer top spill backsplash lock pull drawer color color edge color groove liner
DescriptionThis hanging bedside cabinet has 2 drawers and includes attachment hardware
STO
RA
GE
CA
BIN
ETS
Options
1 Exterior Chassis Color Options
Standard TFL Options (see page 6)
2 Drawer Color Options Standard TFL Options (see page 6)
3 Drawer Edge Color Options Standard TFL Options (see page 6)
4 Top Color Options Standard TFL Options (see page 6) standard Standard 3DL Options (use with B6D spill groove option) (see page 6) standard 7 Grade / Solid Surface Options (see page 7) + $192
5 Spill Groove Options None (X9) standard Spill Groove (B6D) + $65
6 Backsplash Options None (X9) standard Backsplash (B6E) + $142
7 Lock Options (see page 56 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 56 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
9 Removable Drawer Liners None (Q3) standard One Liner (Q4) + $65 Two Liners (Q5) + $130
Notes
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
* Spill groove option is not available on the following colors: Wallaby & Slate Grey
STOR
AG
E C
AB
INE
TS
80.
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and
performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
STORAGE CABINET DESIGN FEATURES
optional wardrobe rail
optional coat hook
optional hanging bar
crest pullis available in satin nickel.
forte pullis available in black or satin nickel.
recessed pullis available in satin nickel.
euro 120 hinge
euro knuckle hinge
5 knuckle hinge
lock optionsinclude standard and keyless with combination keypad.
era pullis available in black or satin nickel.
doorsare TFL (Thermally Fused Laminate) with 3 MM PVC edges.
adjustable levelersare included on all storage cabinets for leveling on uneven floors.
chassisare TFL (Thermally Fused Laminate) with 1MM edge banding. White interiors or matching interiors are available.
flat tops or sloped topsavailable for local codes.
adjustable and fixed shelves available for added flexibility.
storage cabinets lockers
81.
STO
RA
GE
CA
BIN
ETS
width 12", 18", 24" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top storage locker is available in multiple sizes and has 1 full hinged door, 1 stationary shelf, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCD - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
storage cabinets lockersStorage Cabinet with Door
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121466SCD $621 12 14 66 120 9
MM-151466SCD $655 15 14 66 123 11
MM-181466SCD $689 18 14 66 125 13
MM-241466SCD $755 24 14 66 130 17
MM-121472SCD $669 12 14 72 125 10
MM-151472SCD $696 15 14 72 128 12
MM-181472SCD $722 18 14 72 130 14
MM-241472SCD $848 24 14 72 135 18
MM-121478SCD $713 12 14 78 130 11
MM-151478SCD $771 15 14 78 133 13
MM-181478SCD $828 18 14 78 135 15
MM-241478SCD $945 24 14 78 140 20
MM-121484SCD $812 12 14 84 135 12
MM-151484SCD $884 15 14 84 138 14
MM-181484SCD $955 18 14 84 140 16
MM-241484SCD $1069 24 14 84 145 21
MM-121866SCD $673 12 18 25 66 125 12
MM-151866SCD $709 15 18 25 66 128 14
MM-181866SCD $744 18 18 25 66 130 16
MM-241866SCD $871 24 18 25 66 135 21
MM-121872SCD $726 12 18 25 72 130 13
MM-151872SCD $786 15 18 25 72 133 15
MM-181872SCD $845 18 18 25 72 135 18
MM-241872SCD $1009 24 18 25 72 140 23
MM-121878SCD $820 12 18 25 78 135 14
MM-151878SCD $884 15 18 25 78 138 16
MM-181878SCD $948 18 18 25 78 140 19
MM-241878SCD $1107 24 18 25 78 145 25
MM-121884SCD $914 12 18 25 84 140 15
MM-151884SCD $983 15 18 25 84 143 18
MM-181884SCD $1052 18 18 25 84 145 21
MM-241884SCD $1275 24 18 25 84 150 27
MM-122466SCD $746 12 24 25 66 130 15
MM-152466SCD $828 15 24 25 66 133 18
MM-182466SCD $910 18 24 25 66 135 21
MM-242466SCD $1064 24 24 25 66 140 27
MM-122472SCD $835 12 24 25 72 135 16
MM-152472SCD $924 15 24 25 72 138 20
MM-182472SCD $1012 18 24 25 72 140 23
MM-242472SCD $1213 24 24 25 72 145 30
MM-122478SCD $931 12 24 25 78 140 18
MM-152478SCD $1003 15 24 25 78 143 21
MM-182478SCD $1075 18 24 25 78 145 25
MM-242478SCD $1259 24 24 25 78 150 32
MM-122484SCD $1026 12 24 25 84 145 19
MM-152484SCD $1115 15 24 25 84 148 23
MM-182484SCD $1204 18 24 25 84 150 27
MM-242484SCD $1405 24 24 25 84 155 34
STOR
AG
E C
AB
INE
TS
82.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) available on 24" wide models + $67 Hanging Bar (R7) available on 24" deep models + $33 Three Adjustable Shelves (R8) + $213 Three Fixed Shelves (B3N) + $213
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $36
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
DescriptionThis sloped top storage locker is available in multiple sizes and has 1 full hinged door, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 18", 24" Available Sizes depth 14", 18", 24" height 71" - 92.5"
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCDS - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
storage cabinets lockersStorage Cabinet with Door Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121471SCDS $671 12 14 71 120 10
MM-151471SCDS $705 15 14 71 123 12
MM-181471SCDS $739 18 14 71 125 14
MM-241471SCDS $805 24 14 71 130 18
MM-121477SCDS $714 12 14 77 125 11
MM-151477SCDS $743 15 14 77 128 13
MM-181477SCDS $772 18 14 77 130 15
MM-241477SCDS $898 24 14 77 135 20
MM-121483SCDS $763 12 14 83 130 12
MM-151483SCDS $819 15 14 83 133 14
MM-181483SCDS $875 18 14 83 135 16
MM-241483SCDS $990 24 14 83 140 21
MM-121489SCDS $862 12 14 89 135 12
MM-151489SCDS $934 15 14 89 138 15
MM-181489SCDS $1005 18 14 89 140 17
MM-241489SCDS $1114 24 14 89 145 22
MM-121872SCDS $723 12 18 25 72 5 125 13
MM-151872SCDS $761 15 18 25 72 5 128 15
MM-181872SCDS $798 18 18 25 72 5 130 18
MM-241872SCDS $921 24 18 25 72 5 135 23
MM-121878SCDS $776 12 18 25 78 5 130 14
MM-151878SCDS $836 15 18 25 78 5 133 17
MM-181878SCDS $895 18 18 25 78 5 135 19
MM-241878SCDS $1059 24 18 25 78 5 140 25
MM-121884SCDS $870 12 18 25 84 5 135 15
MM-151884SCDS $932 15 18 25 84 5 138 18
MM-181884SCDS $993 18 18 25 84 5 140 21
MM-241884SCDS $1157 24 18 25 84 5 145 27
MM-121890SCDS $964 12 18 25 90 5 140 16
MM-151890SCDS $1033 15 18 25 90 5 143 19
MM-181890SCDS $1102 18 18 25 90 5 145 22
MM-241890SCDS $1325 24 18 25 90 5 150 29
MM-122474SCDS $796 12 24 25 74 5 130 17
MM-152474SCDS $878 15 24 25 74 5 133 20
MM-182474SCDS $960 18 24 25 74 5 135 24
MM-242474SCDS $1094 24 24 25 74 5 140 31
MM-122480SCDS $885 12 24 25 80 5 135 18
MM-152480SCDS $974 15 24 25 80 5 138 22
MM-182480SCDS $1062 18 24 25 80 5 140 26
MM-242480SCDS $1263 24 24 25 80 5 145 33
MM-122486SCDS $981 12 24 25 86 5 140 19
MM-152486SCDS $1053 15 24 25 86 5 143 23
MM-182486SCDS $1125 18 24 25 86 5 145 27
MM-242486SCDS $1309 24 24 25 86 5 150 35
MM-122492SCDS $1076 12 24 25 92 5 145 21
MM-152492SCDS $1170 15 24 25 92 5 148 25
MM-182492SCDS $1264 18 24 25 92 5 150 29
MM-242492SCDS $1452 24 24 25 92 5 155 38
83.
STO
RA
GE
CA
BIN
ETS
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $44 Wardrobe Rail (B3P) available on 24" wide models + $134 Hanging Bar (R7) available on 24" deep models + $66 Two Adjustable Shelves (R8) + $142 Two Fixed Shelves (B3N) + $142
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $48
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $62 Key Specific Lock (H2X) + $62 Keyless Lock (B3E) + $552
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCD2 - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
DescriptionThis flat top storage locker is available in multiple sizes and has 2 hinged doors, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Storage Locker with 2 Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121466SCD2 $658 12 14 66 120 9
MM-151466SCD2 $694 15 14 66 123 11
MM-181466SCD2 $730 18 14 66 125 13
MM-241466SCD2 $800 24 14 66 130 17
MM-121472SCD2 $709 12 14 72 125 10
MM-151472SCD2 $737 15 14 72 128 12
MM-181472SCD2 $765 18 14 72 130 14
MM-241472SCD2 $899 24 14 72 135 18
MM-121478SCD2 $756 12 14 78 130 11
MM-151478SCD2 $817 15 14 78 133 13
MM-181478SCD2 $878 18 14 78 135 15
MM-241478SCD2 $1002 24 14 78 140 20
MM-121484SCD2 $861 12 14 84 135 12
MM-151484SCD2 $937 15 14 84 138 14
MM-181484SCD2 $1012 18 14 84 140 16
MM-241484SCD2 $1133 24 14 84 145 21
MM-121866SCD2 $713 12 18 25 66 125 12
MM-151866SCD2 $751 15 18 25 66 128 14
MM-181866SCD2 $789 18 18 25 66 130 16
MM-241866SCD2 $923 24 18 25 66 135 21
MM-121872SCD2 $770 12 18 25 72 130 13
MM-151872SCD2 $833 15 18 25 72 133 15
MM-181872SCD2 $896 18 18 25 72 135 18
MM-241872SCD2 $1070 24 18 25 72 140 23
MM-121878SCD2 $869 12 18 25 78 135 14
MM-151878SCD2 $937 15 18 25 78 138 16
MM-181878SCD2 $1005 18 18 25 78 140 19
MM-241878SCD2 $1173 24 18 25 78 145 25
MM-121884SCD2 $969 12 18 25 84 140 15
MM-151884SCD2 $1042 15 18 25 84 143 18
MM-181884SCD2 $1115 18 18 25 84 145 21
MM-241884SCD2 $1352 24 18 25 84 150 27
MM-122466SCD2 $791 12 24 25 66 130 15
MM-152466SCD2 $878 15 24 25 66 133 18
MM-182466SCD2 $965 18 24 25 66 135 21
MM-242466SCD2 $1128 24 24 25 66 140 27
MM-122472SCD2 $885 12 24 25 72 135 16
MM-152472SCD2 $979 15 24 25 72 138 20
MM-182472SCD2 $1073 18 24 25 72 140 23
MM-242472SCD2 $1286 24 24 25 72 145 30
MM-122478SCD2 $987 12 24 25 78 140 18
MM-152478SCD2 $1064 15 24 25 78 143 21
MM-182478SCD2 $1140 18 24 25 78 145 25
MM-242478SCD2 $1335 24 24 25 78 150 32
MM-122484SCD2 $1088 12 24 25 84 145 19
MM-152484SCD2 $1182 15 24 25 84 148 21
MM-182484SCD2 $1276 18 24 25 84 150 27
MM-242484SCD2 $1489 24 24 25 84 155 34
storage cabinets lockers
STOR
AG
E C
AB
INE
TS
84.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $44 Wardrobe Rail (B3P) available on 24" wide models + $134 Hanging Bar (R7) available on 24" deep models + $66 Two Adjustable Shelves (R8) + $142 Two Fixed Shelves (B3N) + $142
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $48
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $62 Key Specific Lock (H2X) + $62 Keyless Lock (B3E) + $552
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
DescriptionThis sloped top storage locker is available in multiple sizes and has 2 full hinged doors, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 71" - 92.5"
storage cabinets lockers
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCD2S - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Storage Locker with 2 Doors Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121471SCD2S $711 12 14 71 120 10
MM-151471SCD2S $747 12 14 71 123 12
MM-181471SCD2S $783 18 14 71 125 14
MM-241471SCD2S $853 24 14 71 130 18
MM-121477SCD2S $757 12 14 77 125 11
MM-151477SCD2S $788 15 14 77 128 13
MM-181477SCD2S $818 18 14 77 130 15
MM-241477SCD2S $952 24 14 77 135 20
MM-121483SCD2S $809 12 14 83 130 12
MM-151483SCD2S $869 15 14 83 133 14
MM-181483SCD2S $928 18 14 83 135 16
MM-241483SCD2S $1049 24 14 83 140 21
MM-121489SCD2S $914 12 14 89 135 12
MM-151489SCD2S $990 15 14 89 138 15
MM-181489SCD2S $1065 18 14 89 140 17
MM-241489SCD2S $1181 24 14 89 145 22
MM-121872SCD2S $766 12 18 25 72 5 125 13
MM-151872SCD2S $796 15 18 25 72 5 128 15
MM-181872SCD2S $846 18 18 25 72 5 130 18
MM-241872SCD2S $976 24 18 25 72 5 135 23
MM-121878SCD2S $823 12 18 25 78 5 130 14
MM-151878SCD2S $886 15 18 25 78 5 133 17
MM-181878SCD2S $949 18 18 25 78 5 135 19
MM-241878SCD2S $1123 24 18 25 78 5 140 25
MM-121884SCD2S $922 12 18 25 84 5 135 15
MM-151884SCD2S $988 15 18 25 84 5 138 18
MM-181884SCD2S $1053 18 18 25 84 5 140 21
MM-241884SCD2S $1226 24 18 25 84 5 145 27
MM-121890SCD2S $1022 12 18 25 90 5 140 16
MM-151890SCD2S $1095 15 18 25 90 5 144 19
MM-181890SCD2S $1168 18 18 25 90 5 145 22
MM-241890SCD2S $1405 24 18 25 90 5 150 29
MM-122474SCD2S $844 12 24 25 74 5 130 17
MM-152474SCD2S $931 15 24 25 74 5 133 20
MM-182474SCD2S $1018 18 24 25 74 5 135 24
MM-242474SCD2S $1160 24 24 25 74 5 140 31
MM-122480SCD2S $938 12 24 25 80 5 135 18
MM-152480SCD2S $1032 15 24 25 80 5 138 22
MM-182480SCD2S $1126 18 24 25 80 5 140 26
MM-242480SCD2S $1339 24 24 25 80 5 145 33
MM-122486SCD2S $1040 12 24 25 86 5 140 19
MM-152486SCD2S $1117 15 24 25 86 5 143 23
MM-182486SCD2S $1193 18 24 25 86 5 145 27
MM-242486SCD2S $1388 24 24 25 86 5 150 35
MM-122492SCD2S $1141 12 24 25 92 5 145 21
MM-152492SCD2S $1241 15 24 25 92 5 148 25
MM-182492SCD2S $1340 18 24 25 92 5 150 29
MM-242492SCD2S $1539 24 24 25 92 5 155 38
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCD4 - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
85.
STO
RA
GE
CA
BIN
ETS
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $88
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $96
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $124 Key Specific Lock (H2X) + $124 Keyless Lock (B3E) + $1104
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
DescriptionThis flat top storage locker is available in multiple sizes and has 4 hinged doors, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
storage cabinets lockersStorage Locker with 4 Doors
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121466SCD4 $743 12 14 66 120 9
MM-151466SCD4 $784 15 14 66 123 11
MM-181466SCD4 $824 18 14 66 125 13
MM-241466SCD4 $903 24 14 66 130 17
MM-121472SCD4 $800 12 14 72 125 10
MM-151472SCD4 $832 15 14 72 128 12
MM-181472SCD4 $864 18 14 72 130 14
MM-241472SCD4 $1014 24 14 72 135 18
MM-121478SCD4 $853 12 14 78 130 11
MM-151478SCD4 $922 15 14 78 133 13
MM-181478SCD4 $990 18 14 78 135 15
MM-241478SCD4 $1130 24 14 78 140 20
MM-121484SCD4 $971 12 14 84 135 12
MM-151484SCD4 $1057 15 14 84 138 14
MM-181484SCD4 $1142 18 14 84 140 16
MM-241484SCD4 $1279 24 14 84 145 21
MM-121866SCD4 $805 12 18 25 66 125 12
MM-151866SCD4 $848 15 18 25 66 128 14
MM-181866SCD4 $890 18 18 25 66 130 16
MM-241866SCD4 $1042 24 18 25 66 135 21
MM-121872SCD4 $868 12 18 25 72 130 13
MM-151872SCD4 $940 15 18 25 72 133 15
MM-181872SCD4 $1011 18 18 25 72 135 18
MM-241872SCD4 $1207 24 18 25 72 140 23
MM-121878SCD4 $981 12 18 25 78 135 14
MM-151878SCD4 $1057 15 18 25 78 138 16
MM-181878SCD4 $1134 18 18 25 78 140 19
MM-241878SCD4 $1324 24 18 25 78 145 25
MM-121884SCD4 $1093 12 18 25 84 140 15
MM-151884SCD4 $1176 15 18 25 84 143 18
MM-181884SCD4 $1258 18 18 25 84 145 21
MM-241884SCD4 $1525 24 18 25 84 150 27
MM-122466SCD4 $892 12 24 25 66 130 15
MM-152466SCD4 $990 15 24 25 66 133 21
MM-182466SCD4 $1088 18 24 25 66 135 21
MM-242466SCD4 $1273 24 24 25 66 140 27
MM-122472SCD4 $999 12 24 25 72 135 16
MM-152472SCD4 $1105 15 24 25 72 138 20
MM-182472SCD4 $1210 18 24 25 72 140 23
MM-242472SCD4 $1451 24 24 25 72 145 30
MM-122478SCD4 $1113 12 24 25 78 140 18
MM-152478SCD4 $1200 15 24 25 78 143 21
MM-182478SCD4 $1286 18 24 25 78 145 25
MM-242478SCD4 $1506 24 24 25 78 150 32
MM-122484SCD4 $1227 12 24 25 84 145 19
MM-152484SCD4 $1334 15 24 25 84 148 23
MM-182484SCD4 $1440 18 24 25 84 150 27
MM-242484SCD4 $1680 24 24 25 84 155 34
STOR
AG
E C
AB
INE
TS
86.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door Color Options Standard TFL Options (see page 6)
4 Door Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $88
6 Hinge Location Left (B3K) Right (B3L)
7 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $96
8 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $124 Key Specific Lock (H2X) + $124 Keyless Lock (B3E) + $1104
9 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
DescriptionThis sloped top storage locker is available in multiple sizes and has 4 hinged doors, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 12", 15", 18", 24" Available Sizes depth 14", 18", 24" height 71" - 92.5"
storage cabinets lockers
To order, specify product by number and options: 1 2 3 4 5 6 7 8 9 Sample Order: MM-182472SCD4S - LC2 - B4A - LC2 - LC2 - R8 - B3K - B3G - NM - T5 product no exterior interior door door edge shelf hinge hinge lock pull color color color color location
Storage Locker with 4 Doors Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-121471SCD4S $803 12 14 71 120 10
MM-151471SCD4S $844 15 14 71 123 12
MM-181471SCD4S $884 18 14 71 125 14
MM-241471SCD4S $963 24 14 71 130 18
MM-121477SCD4S $854 12 14 77 125 11
MM-151477SCD4S $889 15 14 77 128 13
MM-181477SCD4S $923 18 14 77 130 15
MM-241477SCD4S $1074 24 14 77 135 20
MM-121483SCD4S $913 12 14 83 130 12
MM-151483SCD4S $980 15 14 83 133 14
MM-181483SCD4S $1047 18 14 83 135 16
MM-241483SCD4S $1184 24 14 83 140 21
MM-121489SCD4S $1031 12 14 89 135 12
MM-151489SCD4S $1117 15 14 89 138 15
MM-181489SCD4S $1202 18 14 89 140 17
MM-241489SCD4S $1332 24 14 89 145 22
MM-121872SCD4S $865 12 18 25 72 5 125 13
MM-151872SCD4S $910 15 18 25 72 5 128 15
MM-181872SCD4S $954 18 18 25 72 5 130 18
MM-241872SCD4S $1102 24 18 25 72 5 135 23
MM-121878SCD4S $928 12 18 25 78 5 130 14
MM-151878SCD4S $999 15 18 25 78 5 138 18
MM-181878SCD4S $1070 18 18 25 78 5 135 19
MM-241878SCD4S $1267 24 18 25 78 5 140 25
MM-121884SCD4S $1041 12 18 25 84 5 135 15
MM-151884SCD4S $1115 15 18 25 84 5 138 18
MM-181884SCD4S $1188 18 18 25 84 5 140 21
MM-241884SCD4S $1384 24 18 25 84 5 145 27
MM-121890SCD4S $1153 12 18 25 90 5 140 16
MM-151890SCD4S $1236 15 18 25 90 5 143 19
MM-181890SCD4S $1318 18 18 25 90 5 145 22
MM-241890SCD4S $1585 24 18 25 90 5 150 29
MM-122474SCD4S $952 12 24 25 74 5 130 17
MM-152474SCD4S $1050 15 24 25 74 5 133 20
MM-182474SCD4S $1148 18 24 25 74 5 135 24
MM-242474SCD4S $1308 24 24 25 74 5 140 31
MM-122480SCD4S $1058 12 24 25 80 5 135 18
MM-152480SCD4S $1164 12 24 25 80 5 135 18
MM-182480SCD4S $1270 18 24 25 80 5 140 26
MM-242480SCD4S $1511 24 24 25 80 5 145 33
MM-122486SCD4S $1173 12 24 25 86 5 140 19
MM-152486SCD4S $1260 15 24 25 86 5 143 23
MM-182486SCD4S $1346 18 24 25 86 5 145 27
MM-242486SCD4S $1566 24 24 25 86 5 150 35
MM-122492SCD4S $1287 12 24 25 92 5 145 21
MM-152492SCD4S $1400 15 24 25 92 5 148 25
MM-182492SCD4S $1512 18 24 25 92 5 150 29
MM-242492SCD4S $1737 24 24 25 92 5 155 38
DescriptionThis flat top storage locker is available in multiple sizes and has 2 hinged doors, 2 drawers, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301466SCDD - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
87.
STO
RA
GE
CA
BIN
ETS
width 30", 36" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) + $67
Hanging Bar (R7) available on 24" deep models + $33
One Adjustable Shelves (R8) + $71 One Fixed Shelves (B3N) + $71
6 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $48
7 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
storage cabinets lockersStorage Locker with Double Doors and 2 Drawers
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301466SCDD $1,729 30 14 66 140 21
MM-361466SCDD $1,821 36 14 66 150 24
MM-301472SCDD $1,794 30 14 72 145 22
MM-361472SCDD $1,866 36 14 72 155 27
MM-301478SCDD $1,854 30 14 78 150 24
MM-361478SCDD $2,037 36 14 78 160 29
MM-301484SCDD $1,988 30 14 84 155 26
MM-361484SCDD $2,183 36 14 84 165 31
MM-301866SCDD $1,799 30 18 25 66 155 26
MM-361866SCDD $1,896 36 18 25 66 165 31
MM-301872SCDD $1,871 30 18 25 72 160 28
MM-361872SCDD $2,033 36 18 25 72 170 33
MM-301878SCDD $1,999 30 18 25 78 165 31
MM-361878SCDD $2,175 36 18 25 78 175 36
MM-301884SCDD $2,127 30 18 25 84 170 33
MM-361884SCDD $2,315 36 18 25 84 180 39
MM-302466SCDD $1,901 30 24 25 66 170 34
MM-362466SCDD $2,120 36 24 25 66 180 40
MM-302472SCDD $2,022 30 24 25 72 175 36
MM-362472SCDD $2,264 36 24 25 72 185 43
MM-302478SCDD $2,150 30 24 25 78 180 39
MM-362478SCDD $2,343 36 24 25 78 190 47
MM-302484SCDD $2,432 30 24 25 84 185 42
MM-362484SCDD $2,521 36 24 25 84 195 50
DescriptionThis sloped top storage locker is available in multiple sizes and has 2 hinged doors, 2 drawers, a 4” recessed toe kick and adjustable levelers for installation on uneven floors It can be installed alone or with multiple cabinets
STOR
AG
E C
AB
INE
TS
88.
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options Exterior Matching (B4A) standard White (B4B) standard
3 Door/Drawer Color Options Standard TFL Options (see page 6)
4 Door/Drawer Edge Color Options Standard 3MM PVC Color Options (see page 6) 5 Shelf Options None (X9) standard Coat Hooks (A4S) + $22 Wardrobe Rail (B3P) + $67
Hanging Bar (R7) available on 24” deep models + $33
One Adjustable Shelves (R8) + $71 One Fixed Shelves (B3N) + $71
6 Hinge Options (see page 80) Euro 120 Hinge (B3G) standard 5 Knuckle Hinge (B3J) standard Euro Knuckle Hinge (B3H) + $48
7 Lock Options (see page 80 for details) No Lock (NL) standard Standard Lock (NM) + $31 Key Specific Lock (H2X) + $31 Keyless Lock (B3E) + $276
8 Pull Options (see page 80 for details) Crest Satin Nickel (T5) standard Era Black (VJ) standard Era Satin Nickel (VK) standard Forte Black (VG) standard Forte Satin Nickel (VH) standard Recessed Satin Nickel (B3D) standard
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 30", 36" Available Sizes depth 14", 18", 24" height 66", 72", 78", 84"
storage cabinets lockers
To order, specify product by number and options: 1 2 3 4 5 6 7 8 Sample Order: MM-301466SCDDS - LC2 - B4A - LC2 - LC2 - R8 - B3G - NM - T5 product no exterior interior door door edge shelf hinge lock pull color color color color
Storage Locker with Double Doors and 2 Drawers Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-301471SCDDS $1,797 30 14 71 140 22
MM-361471SCDDS $1,889 36 14 71 150 26
MM-301477SCDDS $1,862 30 14 77 145 24
MM-361477SCDDS $1,934 36 14 77 155 28
MM-301483SCDDS $1,922 30 14 83 150 26
MM-361483SCDDS $2,105 36 14 83 160 30
MM-301489SCDDS $2,056 30 14 89 155 27
MM-361489SCDDS $2,251 36 14 89 165 33
MM-301872SCDDS $1,867 30 18 25 72 5 155 28
MM-361872SCDDS $1,964 36 18 25 72 5 165 34
MM-301878SCDDS $1,939 30 18 25 78 5 160 31
MM-361878SCDDS $2,101 36 18 25 78 5 170 36
MM-301884SCDDS $2,067 30 18 25 84 5 165 33
MM-361884SCDDS $2,243 36 18 25 84 5 175 39
MM-301890SCDDS $2,195 30 18 25 90 5 165 35
MM-361890SCDDS $2,383 36 18 25 90 5 175 42
MM-302474SCDDS $1,969 30 24 25 74 5 170 38
MM-362474SCDDS $2,188 36 24 25 74 5 180 45
MM-302480SCDDS $2,090 30 24 25 80 5 175 41
MM-362480SCDDS $2,332 36 24 25 80 5 185 48
MM-302486SCDDS $2,218 30 24 25 86 5 180 44
MM-362486SCDDS $2,411 36 24 25 86 5 190 52
MM-302492SCDDS $2,500 30 24 25 92 5 185 46
MM-362492SCDDS $2,589 36 24 25 92 5 195 55
89.
mile markertm benches
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
BENCH DESIGN FEATURES
upholstered seat cushionis 2.375" thick high density foam.
chassisare TFL (Thermally Fused Laminate) with 1MM edge banding.
customer's own material (com)All items are available with material furnished by the customer. Yardage requirements listed in our price list are based on 54" wide. We can take no responsibility for tailoring, wearability or application of COM covers. Carolina is not held responsible for receipt of defective fabrics, as we apply all COM as first quality goods. At no additional charge, Carolina will pre-approve any COM at the customer's request. The additional yardages are based on 54" wide goods. Please contact Customer Service if goods are less than 54" wide. Though every effort has been made to estimate excess yardage required for stripes and matches, Carolina takes NO responsibility where additional materials must be ordered.
repeat railroaded (rr) right way (rw) 2-way1/4-5" Add 10% Add 15% Add 15%6-9" Add 15% Add 18% Add 20%10-13" Add 20% Add 25% Add 30%14-20" Add 25% Add 30% Add 35%21-27" Add 30% Add 35% Add 40%28-34" Add 35% Add 40% Add 45%
RR = Railroad or Top to Selvage RW = Right Way (as woven) or Top Right or In and Out of Bolt or Up the Goods.
customer's own leather (col)If you desire to furnish your own leather, please figure 18 square feet per yard of 54" wide material, based on the yardage requirements listed for each model.
shipping com's and col's All COM and COL packages must be marked clearly with the following information on BOTH the exterior package and the upholstery material when sent to the factory.
• Your company name & contact person• Your purchase order number• Style number and applicable upholstery cover number
On your purchase order the following information must be supplied to us regarding COM fabric:
• Manufacturer's name• Correct style number to which COM or COL is to be applied• A sample of the COM or COL• Instructions for proper application• Manufacturer's pattern and color number• Correct side of fabric
When no instructions are received with your COM or COL, we will use our own judgment with no recourse. Extended lead times may occur if COM or COL is not properly identified when received by Carolina. Carolina is not responsible for any unclaimed COM/COL 15 days beyond shipment of goods.
ship all com and col prepaid toOFS Plant 3, Attn: COM Department105 West 10th StreetHuntingburg, IN 47542
adjustable levelersare included on all benches for leveling on uneven floors.
90.
BE
NC
HE
S
width 24", 30", 36", 48" Available Sizes depth 18", 24" height 17"
To order, specify product by number and options: 1 Sample Order: MM-241819BC - LC2 product no exterior color
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options (Open Bench Only) Standard TFL Options (see page 6)
Bench Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241819BC $803 24 17 5 17 55 6
MM-301819BC $854 30 17 5 17 60 8
MM-361819BC $901 36 17 5 17 65 9
MM-481819BC $1003 48 17 5 17 70 12
MM-242419BC $852 24 23 5 17 55 8
MM-302419BC $905 30 23 5 17 60 10
MM-362419BC $954 36 23 5 17 65 12
MM-482419BC $1059 48 23 5 17 70 15
Bench Cabinet Closed
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241819BCC $860 24 18 25 17 55 6
MM-301819BCC $909 30 18 25 17 55 8
MM-361819BCC $953 36 18 25 17 55 9
MM-481819BCC $1065 48 18 25 17 55 12
MM-242419BCC $908 24 24 25 17 55 8
MM-302419BCC $954 30 24 25 17 55 10
MM-362419BCC $1005 36 24 25 17 55 12
MM-482419BCC $1113 48 24 25 17 55 15
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
single sided benches
Description - Bench Cabinet OpenThis open bench cabinet is available in multiple sizes, has a 4" recessed toe kick and adjustable levelers for installation on uneven floors Bench cushion (sold separately) is attached to the top of this cabinet
Description - Bench Cabinet ClosedThis closed bench cabinet is available in multiple sizes, has a 4" recessed toe kick and adjustable levelers for installation on uneven floors Bench cushion (sold separately) is attached to the top of this cabinet
91.
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 239 267 289 324 395 466 547 620 694 767 841 914 987 1061 1134 501 586 693
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 300 328 350 385 456 527 608 681 755 828 902 975 1048 1122 1195 562 647 754
BE
NC
HE
S
Options
1 Fabric Pattern and Color
Notes
* For a list of fabric selection, visit www carolinabusinessfurniture com/tools/textiles/
* A sample of all COM fabrics must be submitted to Carolina for preliminary approval prior to shipment of fabric
* See page 89 for COM and COL requirements
DescriptionThis bench cushion is available in multiple sizes and has a 2 375" cushion Bench cushion is sold separately from bench and is attached using velcro
singled sided bench cushionsBench Cushion
WIDTH DEPTH HEIGHT WEIGHT CUBIC COM FT
MM-2418BC 24 18 5 2 375 11 1 1 5
MM-3018BC 30 18 5 2 375 14 1 1 5
MM-3618BC 36 18 5 2 375 16 1 1 5
MM-4818BC 48 18 5 2 375 22 2 2
MM-2424BC 24 24 5 2 375 14 1 1 5
MM-3024BC 30 24 5 2 375 16 1 5 1 5
MM-3624BC 36 24 5 2 375 18 1 5 1 5
MM-4824BC 48 24 5 2 375 24 2 2
To order, specify product by number and options: 1 Sample Order: MM-2418BC - CF Stinson - Chi - Indigo product no fabric pattern color
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 361 389 411 446 517 588 669 742 816 889 963 1036 1109 1183 1256 623 708 815
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 483 521 549 597 692 786 894 992 1089 1187 1285 1383 1481 1578 1676 822 936 1078
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 361 389 411 446 517 588 669 742 816 889 963 1036 1109 1183 1256 623 708 815
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 300 328 350 385 456 527 608 681 755 828 902 975 1048 1122 1195 562 647 754
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 422 450 472 507 578 649 730 803 877 950 1024 1097 1170 1244 1317 684 769 876
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 544 582 610 658 753 847 955 1053 1150 1248 1346 1444 1542 1639 1737 883 997 1139
width 24", 30", 36", 48" Available Sizes depth 18", 24" height 2"
92.
BE
NC
HE
S
width 24", 30", 36", 48" Available Sizes depth 18", 24" height 17"
To order, specify product by number and options: 1 Sample Order: MM-241819DSBC - LC2 product no exterior color
Double Bench Cabinet Open
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-241819DSBC $893 24 17 5 17 55 6
MM-301819DSBC $944 30 17 5 17 60 8
MM-361819DSBC $991 36 17 5 17 65 9
MM-481819DSBC $1093 48 17 5 17 70 12
MM-242419DSBC $942 24 23 5 17 55 8
MM-302419DSBC $995 30 23 5 17 60 10
MM-362419DSBC $1044 36 23 5 17 65 12
MM-482419DSBC $1149 48 23 5 17 70 15
double sided benches
Description - Bench Cabinet OpenThis open bench cabinet is available in multiple sizes, has a 4" recessed toe kick and adjustable levelers for installation on uneven floors Bench cushion (sold separately) is attached to the top of this cabinet
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Interior Chassis Color Options (Open Bench Only) Standard TFL Options (see page 6)
Notes
* Cove molding is necessary to meet infection control requirements and must be ordered separately Order cove molding in the beginning stages and from a local supplier In order to complete installation, it must be adhered to the base
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
93.
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 252 280 301 337 407 478 548 619 689 760 830 901 971 1042 1113 504 586 688
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 314 342 363 399 469 540 610 681 751 822 892 963 1033 1104 1175 566 648 750
BE
NC
HE
S
Options
1 Fabric Pattern and Color
Notes
* For a list of fabric selection, visit www carolinabusinessfurniture com/tools/textiles/
* A sample of all COM fabrics must be submitted to Carolina for preliminary approval prior to shipment of fabric
* See page 89 for COM and COL requirements
DescriptionThis bench cushion is available in multiple sizes and has a 2 375" cushion Bench cushion is sold separately from bench and is attached using velcro
double sided bench cushionsBench Cushion
WIDTH DEPTH HEIGHT WEIGHT CUBIC COM FT
MM-2420DSBC 24 20 2 375 12 2 1 5
MM-3020DSBC 30 20 2 375 15 2 1 5
MM-3620DSBC 36 20 2 375 17 3 1 5
MM-4820DSBC 48 20 2 375 23 3 2
MM-2426DSBC 24 26 2 375 15 2 1 5
MM-3026DSBC 30 26 2 375 17 3 1 5
MM-3626DSBC 36 26 2 375 19 3 1 5
MM-4826BC 48 26 2 375 25 4 2
To order, specify product by number and options: 1 Sample Order: MM-2420DSBC - CF Stinson - Chi - Indigo product no fabric pattern color
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 373 401 422 458 528 599 669 740 810 881 951 1022 1092 1163 1234 625 707 809
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 491 529 557 604 698 792 886 980 1074 1168 1262 1356 1450 1544 1638 817 927 1063
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 373 401 422 458 528 599 669 740 810 881 951 1022 1092 1163 1234 625 707 809
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 314 342 363 399 469 540 610 681 751 822 892 963 1033 1104 1175 566 648 750
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 432 460 481 517 587 658 728 799 869 940 1010 1081 1151 1222 1293 684 766 868
Grade/List Price com col
3 4 5 6 7 8 9 10 11 13 L112 14 15 L2 L31 2 551 589 617 664 758 852 946 1040 1134 1228 1322 1416 1510 1604 1698 877 987 1123
width 24", 30", 36", 48" Available Sizes depth 20", 26" height 2"
94.
mile markertm wall panels
Carolina is committed to a better way to experience healthcare Mile MarkerTM offers many built-in standard features and multiple optional upgrades that enhance the beauty and performance of the facility These extras offer a better experience for the patient and family, and contribute to less stress for staff
WALL PANEL DESIGN FEATURES
back painted glass marker boardis available back painted white and magnetic back painted white. Rare earth magnets are available as an accessory on page 80. Size 22" x 22".
flat tops or sloped topsavailable for local codes.
attachment hardwareis included.
panelsare TFL (Thermally Fused Laminate) with 1MM edge banding.
WA
LL PAN
ELS
95.
wall panels
To order, specify product by number and options: 1 2 3 Sample Order: MM-2424WP - LC2 - B6A - B3K product no exterior back glass color painted location glass
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Back Painted Glass None (X9) standard Back Painted Glass (B6A) + $289 Magnetic Back Painted Glass (C2E) + $394
3 Glass Location Left (B3K) Right (B3L)
Flat Panel
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-2424WP $184 24 0 75 24 12 2
MM-3624WP $229 36 0 75 24 18 2
MM-4824WP $274 48 0 75 24 24 3
MM-5224WP $289 52 0 75 24 26 3
MM-6024WP $319 60 0 75 24 30 3
MM-2432WP $214 24 0 75 32 16 2
MM-3632WP $274 36 0 75 32 24 3
MM-4832WP $334 48 0 75 32 32 3
MM-5232WP $354 52 0 75 32 35 3
MM-6032WP $394 60 0 75 32 40 4
MM-2440WP $244 24 0 75 40 20 2
MM-3640WP $319 36 0 75 40 30 3
MM-4840WP $394 48 0 75 40 40 4
MM-5240WP $419 52 0 75 40 44 4
MM-6040WP $469 60 0 75 40 50 5
MM-2472WP $364 24 0 75 72 36 4
MM-3672WP $499 36 0 75 72 54 5
MM-4872WP $634 48 0 75 72 72 6
MM-5272WP $679 52 0 75 72 78 7
MM-6072WP $769 60 0 75 72 90 8
MM-2478WP $387 24 0 75 78 39 4
MM-3678WP $533 36 0 75 78 59 5
MM-4878WP $679 48 0 75 78 78 7
MM-5278WP $728 52 0 75 78 85 7
MM-6078WP $825 60 0 75 78 98 8
MM-2484WP $409 24 0 75 84 42 4
MM-3684WP $567 36 0 75 84 63 6
MM-4884WP $724 48 0 75 84 84 7
MM-5284WP $777 52 0 75 84 91 8
MM-6084WP $882 60 0 75 84 105 9
width 24", 36", 48", 52", 60" Available Sizes depth 1" height 24", 32", 40", 72", 78", 84"
DescriptionThis flat panel is available in multiple sizes and has a flat top Attachment hardware is included
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
WA
LL P
AN
ELS
96.
wall panels
To order, specify product by number and options: 1 2 3 Sample Order: MM-2426WPS - LC2 - B6A - B3K product no exterior back glass color painted location glass
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Back Painted Glass Marker Board None (X9) standard Back Painted Glass (B6A) + $289 Magnetic Back Painted Glass (C2E) + $394
3 Glass Location Left (B3K) Right (B3L)
Flat Panel Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-2426WPS $198 24 0 75 26 13 2
MM-3626WPS $250 36 0 75 26 20 2
MM-4826WPS $302 48 0 75 26 26 3
MM-5226WPS $319 52 0 75 26 29 3
MM-6026WPS $354 60 0 75 26 33 3
MM-2434WPS $230 24 0 75 34 17 2
MM-3634WPS $298 36 0 75 34 26 3
MM-4834WPS $366 48 0 75 34 34 3
MM-5234WPS $389 52 0 75 34 37 4
MM-6034WPS $434 60 0 75 34 43 4
MM-2442WPS $262 24 0 75 42 21 2
MM-3642WPS $346 36 0 75 42 32 3
MM-4842WPS $430 48 0 75 42 42 4
MM-5242WPS $458 52 0 75 42 46 4
MM-6042WPS $514 60 0 75 42 53 5
MM-2474WPS $390 24 0 75 74 37 4
MM-3674WPS $538 36 0 75 74 56 5
MM-4874WPS $686 48 0 75 74 74 7
MM-5274WPS $735 52 0 75 74 81 7
MM-6074WPS $834 60 0 75 74 93 8
MM-2480WPS $414 24 0 75 80 40 4
MM-3680WPS $574 36 0 75 80 60 5
MM-4880WPS $734 48 0 75 80 80 7
MM-5280WPS $787 52 0 75 80 87 8
MM-6080WPS $894 60 0 75 80 100 9
MM-2486WPS $438 24 0 75 86 43 4
MM-3686WPS $610 36 0 75 86 65 6
MM-4886WPS $782 48 0 75 86 86 8
MM-5286WPS $839 52 0 75 86 94 8
MM-6086WPS $954 60 0 75 86 108 9
DescriptionThis flat panel is available in multiple sizes and has a sloped top Attachment hardware is included
width 24", 36", 48", 52", 60" Available Sizes depth 1" height 26", 34", 42", 74", 80", 86"
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
97.
WA
LL PAN
ELS
wall panels raised
To order, specify product by number and options: 1 2 3 Sample Order: MM-2424WC - LC2 - B6A - B3K product no exterior back glass color painted location glass
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Back Painted Glass Marker Board None (X9) standard Back Painted Glass (B6A) + $289 Magnetic Back Painted Glass (C2E) + $394
3 Glass Location Left (B3K) Right (B3L)
Raised Panel
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-2424WC $379 24 5 75 24 26 4
MM-3624WC $475 36 5 75 24 38 5
MM-4824WC $571 48 5 75 24 50 6
MM-5224WC $602 52 5 75 24 54 7
MM-6024WC $667 60 5 75 24 62 8
MM-2432WC $443 24 5 75 32 34 4
MM-3632WC $571 36 5 75 32 50 6
MM-4832WC $698 48 5 75 32 66 8
MM-5232WC $741 52 5 75 32 72 9
MM-6032WC $826 60 5 75 32 82 10
MM-2440WC $507 24 5 75 40 42 5
MM-3640WC $667 36 5 75 40 62 8
MM-4840WC $826 48 5 75 40 82 10
MM-5240WC $879 52 5 75 40 90 11
MM-6040WC $985 60 5 75 40 102 12
MM-2472WC $762 24 5 75 72 74 9
MM-3672WC $1049 36 5 75 72 110 13
MM-4872WC $1336 48 5 75 72 146 17
MM-5272WC $1431 52 5 75 72 158 18
MM-6072WC $1622 60 5 75 72 182 21
MM-2478WC $810 24 5 75 78 80 10
MM-3678WC $1120 36 5 75 78 120 14
MM-4878WC $1431 48 5 75 78 158 18
MM-5278WC $1535 52 5 75 78 172 20
MM-6078WC $1742 60 5 75 78 198 23
MM-2484WC $857 24 5 75 84 86 11
MM-3684WC $1192 36 5 75 84 128 15
MM-4884WC $1527 48 5 75 84 171 20
MM-5284WC $1638 52 5 75 84 185 21
MM-6084WC $1861 60 5 75 84 214 24
DescriptionThis raised panel is available in multiple sizes and has a flat top Attachment hardware is included
Notes
* Front Panel is removable
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 24", 36", 48", 52", 60" Available Sizes depth 6" height 24", 32", 40", 72", 78", 84"
WA
LL P
AN
ELS
98.
wall panels raised
To order, specify product by number and options: 1 2 3 Sample Order: MM-2426WCS - LC2 - B6A - B3K product no exterior back glass color painted location glass
Options
1 Exterior Chassis Color Options Standard TFL Options (see page 6)
2 Back Painted Glass Marker Board None (X9) standard Back Painted Glass (B6A) + $289 Magnetic Back Painted Glass (C2E) + $394
3 Glass Location Left (B3K) Right (B3L)
Raised Panel Sloped
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
MM-2426WCS $409 24 5 75 26 28 4
MM-3626WCS $520 36 5 75 26 42 5
MM-4826WCS $630 48 5 75 26 54 7
MM-5226WCS $667 52 5 75 26 60 7
MM-6026WCS $741 60 5 75 26 68 8
MM-2434WCS $477 24 5 75 34 36 5
MM-3634WCS $622 36 5 75 34 54 7
MM-4834WCS $766 48 5 75 34 70 9
MM-5234WCS $814 52 5 75 34 76 9
MM-6034WCS $911 60 5 75 34 88 11
MM-2442WCS $545 24 5 75 42 44 6
MM-3642WCS $724 36 5 75 42 66 8
MM-4842WCS $902 48 5 75 42 86 10
MM-5242WCS $962 52 5 75 42 94 11
MM-6042WCS $1081 60 5 75 42 108 13
MM-2474WCS $817 24 5 75 74 76 9
MM-3674WCS $1132 36 5 75 74 114 13
MM-4874WCS $1446 48 5 75 74 150 18
MM-5274WCS $1551 52 5 75 74 164 19
MM-6074WCS $1761 60 5 75 74 188 22
MM-2480WCS $868 24 5 75 80 82 10
MM-3680WCS $1208 36 5 75 80 122 14
MM-4880WCS $1548 48 5 75 80 162 19
MM-5280WCS $1661 52 5 75 80 176 20
MM-6080WCS $1888 60 5 75 80 202 23
MM-2486WCS $919 24 5 75 86 88 11
MM-3686WCS $1285 36 5 75 86 131 15
MM-4886WCS $1650 48 5 75 86 175 20
MM-5286WCS $1772 52 5 75 86 190 22
MM-6086WCS $2016 60 5 75 86 219 25
DescriptionThis raised panel is available in multiple sizes and has a sloped top Attachment hardware is included
Notes
* Front Panel is removable
* All Mile Marker cabinetry is recommended to be anchored to a wall or floor Hardware is not included with cabinets
width 24", 36", 48", 52", 60" Available Sizes depth 6" height 26", 34", 42", 74", 80", 86"
99.
accessories lighting
AC
CE
SSOR
IES
Task Lighting
LIST WIDTH DEPTH HEIGHT WEIGHT
TL-19 $214 8 5 2 9375 1 2
TL-18 $214 12 2 9375 1 2
TL-17 $238 18 2 9375 1 3
TL-14 $379 24 2 9375 1 4
Daisy Chain Connectors
LIST LENGTH
DC-1 $30 8
DC-2 $30 12
DC-3 $50 24
DC-4 $50 48
DC-5 $50 72
Glass Markerboard Magnets
LIST WEIGHT CUBIC FT
MGT-1 $105 1 1
FeaturesEnergy efficient LED 5200KBulbsFrosted diffuserSilver frame10' power cordAluminum constructionScrew mountingUL Listed
width 8.5", 12", 18", 24" Available Sizes depth 3" height 1"
To order, specify product by number: Sample Order: TL-14 product no
Available Sizes length 8", 12", 24", 48", 72"
Notes
* Set of 5 Rare earth magnets are for use on Glass Markerboards
100.
accessories equipment rails
AC
CE
SSOR
IES
Equipment Rail
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ER12 $147 12 1 1 2 1
ER18 $192 18 1 1 2 1
ER24 $220 24 1 1 3 1
ER30 $249 30 1 1 3 1
ER36 $277 36 1 1 4 1
ER42 $306 42 1 1 4 1
ER48 $334 48 1 1 5 1
ER54 $363 54 1 1 5 1
ER60 $391 60 1 1 6 1
Equipment Rail Adapters - Single & Double
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERAS $69 1 5 625 2 625 1 1
ERAD $90 3 625 2 625 1 1
Equipment Rail Adapter Tool Set
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERAT $87 12 9 25 2 3 1
FeaturesExtruded aluminum2 Thermoplastic friction-fit end capsPre-drilled mounting holesLaminate inlay
To order, specify product by number: Sample Order: ER12 product no
FeaturesExtruded aluminumAttaches to equipment railAllows customer created solution
Features32 pc srewdriver and bit set for equipment rail and accessories
101.
accessories equipment rails
AC
CE
SSOR
IES
FeaturesExtruded aluminum Attaches to equipment railDesigned to hold a variety of paper towel dispensers
To order, specify product by number: Sample Order: ERPT product no
Equipment Rail Universal Paper Towel Mount
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERPT $177 3 625 2 625 1 1
Equipment Rail Universal Vacuum Bottle Slide
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERVS $207 2 1 125 4 1 1
Equipment Rail Universal Glove Box - Single / Double / Triple
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERGB1 $387 5 75 5 10 2 1
ERGB2 $465 11 375 5 10 4 1
ERGB3 $597 16 75 5 10 6 1
Equipment Rail Universal Sharps Container Mount
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERSC $246 5 75 5 1 1
Equipment Rail Universal Soap/Foam Dispenser Mount
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERSD $201 5 75 7 1 1
FeaturesIndustry standard slide profileAttaches to equipment railAnodized aluminum
FeaturesABS plasticAttaches to equipment railDesigned to hold one, two or three boxes of gloves
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold large sharps containers
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold a variety of soap/foam dispensers
102.
accessories equipment rails
AC
CE
SSOR
IES
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold Welch Allyn Tycos Aneroid BloodPressure Manometer
To order, specify product by number: Sample Order: ERBP product no
Equipment Rail Welch Allyn Blood Pressure Mount(TYCOS 509)
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERBP $267 5 625 875 2 625 1 1
Equipment Rail Welch Allyn Ophthalmoscope Mount(Models 767 / 777)
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
EROS $267 6 75 2 625 1 1
Equipment Rail Welch Allyn Speculum Container Mount
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERSP $267 2 75 75 4 1 1
Equipment Rail Welch Allyn Sure Temp Thermometer Mount
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERTM $267 5 75 4 25 1 1
Equipment Rail U-Shaped Wire Basket
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERUB $357 6 75 5 7 275 2 1
Equipment Rail Rectangular Wire Basket
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERRB $309 10 7 25 4 25 3 1
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold Welch Allyn 767/777 Ophthalmoscope
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold Welch Allyn Speculum Container
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold Welch Allyn Sure Temp Thermometer
FeaturesNylon finish on wire-form constructionAttaches to equipment railDesigned to hold a variety of supplies
FeaturesNylon finish on wire-form constructionAttaches to equipment railDesigned to hold a variety of supplies
103.
accessories equipment rails
AC
CE
SSOR
IES
FeaturesNylon finish on wire form constructionAttaches to equipment railDesigned to hold patient charts
Equipment Rail Wire Chart Holder
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERCH $444 13 4 10 3 1
Equipment Rail Single Hook / Triple Hook
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERSH $201 1 5 5 5 2 625 1 1
ERTH $420 12 5 625 2 625 1 1
Equipment Rail Paper Display Rail
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERPD $267 13 1 625 2 625 1 1
Equipment Rail Triple Clip Organizer
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERTC $357 9 75 2 2 875 1 1
Equipment Rail Cord Bundler
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERCB $177 1 5 1 25 4 1 1
Equipment Rail Folding Shelf
LIST WIDTH DEPTH HEIGHT WEIGHT CUBIC FT
ERFS $897 15 75 1 75 14 25 1 1
FeaturesPowder coated hook and plateAttaches to equipment railDesigned to hold a variety of items
FeaturesPowder coated aluminum plateAttaches to equipment railDesigned to hold a single sheet of paper for in-roomand hallway notifications
FeaturesPowder coated plate with plastic/metal clipsAttaches to equipment railDesigned to hold a variety of items
FeaturesExtruded aluminumAttaches to equipment railDesigned to hold a variety of items
FeaturesPolypropylene shelf with spill groovePowder coated aluminum plateAttaches to equipment railDesigned for single handed operation
To order, specify product by number: Sample Order: ERCH product no
INDEX
105.
index by model number
ER12 100ER18 100ER241 100ER30 100ER36 100ER42 100ER48 100ER54 100ER60 100ERAD 100ERAS 100ERAT 100ERBP 102ERCB 103ERCH 103ERFS 103ERGB1 101ERGB2 101ERGB3 101EROS 102ERPD 103ERPT 101ERRB 102ERSC 101ERSD 101ERSH 103ERSP 102ERTC 103ERTH 103ERTM 102ERUB 102ERVS 101MM-121833BC 10MM-181833BC 10MM-211833BC 10MM-241833BC 10MM-121836BC 10MM-181836BC 10MM-211836BC 10MM-241836BC 10MM-122433BC 10MM-182433BC 10MM-212433BC 10MM-242433BC 10MM-122436BC 10MM-182436BC 10MM-212436BC 10MM-242436BC 10MM-301833BC 10MM-361833BC 10MM-301836BC 10MM-361836BC 10MM-302433BC 10MM-362433BC 10MM-302436BC 10MM-362436BC 10MM-121833BCD 11MM-181833BCD 11MM-211833BCD 11MM-241833BCD 11MM-121836BCD 11MM-181836BCD 11MM-211836BCD 11MM-241836BCD 11MM-122433BCD 11MM-182433BCD 11
MM-212433BCD 11MM-242433BCD 11MM-122436BCD 11MM-182436BCD 11MM-212436BCD 11MM-242436BCD 11MM-121833BCDO 12MM-181833BCDO 12MM-211833BCDO 12MM-241833BCDO 12MM-121836BCDO 12MM-181836BCDO 12MM-211836BCDO 12MM-241836BCDO 12MM-122433BCDO 12MM-182433BCDO 12MM-212433BCDO 12MM-242433BCDO 12MM-122436BCDO 12MM-182436BCDO 12MM-212436BCDO 12MM-242436BCDO 12MM-121833BCDD 13MM-181833BCDD 13MM-211833BCDD 13MM-241833BCDD 13MM-121836BCDD 13MM-181836BCDD 13MM-211836BCDD 13MM-241836BCDD 13MM-122433BCDD 13MM-182433BCDD 13MM-212433BCDD 13MM-242433BCDD 13MM-122436BCDD 13MM-182436BCDD 13MM-212436BCDD 13MM-242436BCDD 13MM-121833BCDDO 14MM-181833BCDDO 14MM-211833BCDDO 14MM-241833BCDDO 14MM-121836BCDDO 14MM-181836BCDDO 14MM-211836BCDDO 14MM-241836BCDDO 14 MM-122433BCDDO 14MM-182433BCDDO 14MM-212433BCDDO 14MM-242433BCDDO 14MM-122436BCDDO 14MM-182436BCDDO 14MM-212436BCDDO 14MM-242436BCDDO 14MM-121833BC2 15MM-181833BC2 15MM-211833BC2 15MM-241833BC2 15MM-121836BC2 15MM-181836BC2 15MM-211836BC2 15MM-241836BC2 15MM-122433BC2 15MM-182433BC2 15MM-212433BC2 15MM-242433BC2 15
MM-122436BC2 15MM-182436BC2 15MM-212436BC2 15MM-242436BC2 15MM-301833BC2 15MM-361833BC2 15MM-301836BC2 15MM-361836BC2 15MM-302433BC2 15MM-362433BC2 15MM-302436BC2 15MM-362436BC2 15MM-121833BC3 16MM-181833BC3 16MM-211833BC3 16MM-241833BC3 16MM-121836BC3 16MM-181836BC3 16MM-211836BC3 16MM-241836BC3 16MM-122433BC3 16MM-182433BC3 16MM-212433BC3 16MM-242433BC3 16MM-122436BC3 16MM-182436BC3 16MM-212436BC3 16MM-242436BC3 16MM-301833BC3 16MM-361833BC3 16MM-301836BC3 16MM-361836BC3 16MM-302433BC3 16MM-362433BC3 16MM-302436BC3 16MM-362436BC3 16MM-121833BC4 17MM-181833BC4 17MM-211833BC4 17MM-241833BC4 17MM-121836BC4 17MM-181836BC4 17MM-211836BC4 17MM-241836BC4 17MM-122433BC4 17MM-182433BC4 17MM-212433BC4 17MM-242433BC4 17MM-122436BC4 17MM-182436BC4 17MM-212436BC4 17MM-242436BC4 17MM-301833BC4 17MM-361833BC4 17MM-301836BC4 17MM-361836BC4 17MM-302433BC4 17MM-362433BC4 17MM-302436BC4 17MM-362436BC4 17MM-301833BCD 18MM-361833BCD 18MM-301836BCD 18MM-361836BCD 18MM-302433BCD 18MM-362433BCD 18
106.
index by model number
MM-302436BCD 18MM-362436BCD 18MM-301833BCDO 19MM-361833BCDO 19MM-301836BCDO 19MM-361836BCDO 19MM-302433BCDO 19MM-362433BCDO 19MM-302436BCDO 19MM-362436BCDO 19MM-301833BCDD 20MM-361833BCDD 20MM-301836BCDD 20MM-361836BCDD 20MM-302433BCDD 20MM-362433BCDD 20MM-302436BCDD 20MM-362436BCDD 20MM-301833BCDDO 21MM-361833BCDDO 21MM-301836BCDDO 21MM-361836BCDDO 21MM-302433BCDDO 21MM-362433BCDDO 21MM-302436BCDDO 21MM-362436BCDDO 21MM-241833BSC 22MM-241836BSC 22MM-242433BSC 22MM-242436BSC 22MM-241833BSCO 23MM-241836BSCO 23MM-242433BSCO 23MM-242436BSCO 23MM-301833BSC 24MM-361833BSC 24MM-301836BSC 24MM-361836BSC 24MM-302433BSC 24MM-362433BSC 24MM-302436BSC 24MM-362436BSC 24MM-301833BSCO 25MM-361833BSCO 25MM-301836BSCO 25MM-361836BSCO 25MM-302433BSCO 25MM-362433BSCO 25MM-302436BSCO 25MM-362436BSCO 25MM-361833ADA 26MM-362433ADA 26MM-633BF 27MM-636BF 27MM-833CBF 27MM-836CBF 27MM-1833BE 28MM-2433BE 28MM-1836BE 28MM-2436BE 28MM-121414HBC 29MM-181414HBC 29MM-211414HBC 29MM-241414HBC 29MM-121416HBC 29MM-181416HBC 29
MM-211416HBC 29MM-241416HBC 29MM-121429HBC 29MM-181429HBC 29MM-211429HBC 29MM-241429HBC 29MM-121432HBC 29MM-181432HBC 29MM-211432HBC 29MM-241432HBC 29MM-121814HBC 29MM-181814HBC 29MM-211814HBC 29MM-241814HBC 29MM-121816HBC 29MM-181816HBC 29MM-211816HBC 29MM-241816HBC 29MM-121829HBC 29MM-181829HBC 29MM-211829HBC 29MM-241829HBC 29MM-121832HBC 29MM-181832HBC 29MM-211832HBC 29MM-241832HBC 29MM-122414HBC 29MM-182414HBC 29MM-212414HBC 29MM-242414HBC 29MM-122416HBC 29MM-182416HBC 29MM-212416HBC 29MM-242416HBC 29MM-122429HBC 29MM-182429HBC 29MM-212429HBC 29MM-242429HBC 29MM-122432HBC 29MM-182432HBC 29MM-212432HBC 30MM-242432HBC 30MM-301414HBC 30MM-361414HBC 30MM-301416HBC 30MM-361416HBC 30MM-301429HBC 30MM-361429HBC 30MM-301432HBC 30MM-361432HBC 30MM-301814HBC 30MM-361814HBC 30MM-301816HBC 30MM-361816HBC 30MM-301829HBC 30MM-361829HBC 30MM-301832HBC 30MM-361832HBC 30MM-302414HBC 30MM-362414HBC 30MM-302416HBC 30MM-362416HBC 30MM-302429HBC 30MM-362429HBC 30MM-302432HBC 30MM-362432HBC 30
MM-121414HBCD 31MM-181414HBCD 31MM-211414HBCD 31MM-241414HBCD 31MM-121416HBCD 31MM-181416HBCD 31MM-211416HBCD 31MM-241416HBCD 31MM-121429HBCD 31MM-181429HBCD 31MM-211429HBCD 31MM-241429HBCD 31MM-121432HBCD 31MM-181432HBCD 31MM-211432HBCD 31MM-241432HBCD 31MM-121814HBCD 31MM-181814HBCD 31MM-211814HBCD 31MM-241814HBCD 31MM-121816HBCD 31MM-181816HBCD 31MM-211816HBCD 31MM-241816HBCD 31MM-121829HBCD 31MM-181829HBCD 31MM-211829HBCD 31MM-241829HBCD 31MM-121832HBCD 31MM-181832HBCD 31MM-211832HBCD 31MM-241832HBCD 31MM-122414HBCD 31MM-182414HBCD 31MM-212414HBCD 31MM-242414HBCD 31MM-122416HBCD 31MM-182416HBCD 31MM-212416HBCD 31MM-242416HBCD 31MM-122429HBCD 31MM-182429HBCD 31MM-212429HBCD 31MM-242429HBCD 31MM-122432HBCD 31MM-182432HBCD 31MM-212432HBCD 31MM-242432HBCD 31MM-121429HBCDD 32MM-181429HBCDD 32MM-211429HBCDD 32MM-241429HBCDD 32MM-121432HBCDD 32MM-181432HBCDD 32MM-211432HBCDD 32MM-241432HBCDD 32MM-121829HBCDD 32MM-181829HBCDD 32MM-211829HBCDD 32MM-241829HBCDD 32MM-121832HBCDD 32MM-181832HBCDD 32MM-211832HBCDD 32MM-241832HBCDD 32MM-122429HBCDD 32MM-182429HBCDD 32
107.
index by model number
MM-212429HBCDD 32MM-242429HBCDD 32MM-122432HBCDD 32MM-182432HBCDD 32MM-212432HBCDD 32MM-242432HBCDD 32MM-121414HBC2 33MM-181414HBC2 33MM-211414HBC2 33MM-241414HBC2 33MM-121416HBC2 33MM-181416HBC2 33MM-211416HBC2 33MM-241416HBC2 33MM-121429HBC2 33MM-181429HBC2 33MM-211429HBC2 33MM-241429HBC2 33MM-121432HBC2 33MM-181432HBC2 33MM-211432HBC2 33MM-241432HBC2 33MM-121814HBC2 33MM-181814HBC2 33MM-211814HBC2 33MM-241814HBC2 33MM-121816HBC2 33MM-181816HBC2 33MM-211816HBC2 33MM-241816HBC2 33MM-121829HBC2 33MM-181829HBC2 33MM-211829HBC2 33MM-241829HBC2 33MM-121832HBC2 33MM-181832HBC2 33MM-211832HBC2 33MM-241832HBC2 33MM-122414HBC2 33MM-182414HBC2 33MM-212414HBC2 33MM-242414HBC2 33MM-122416HBC2 33MM-182416HBC2 33MM-212416HBC2 33MM-242416HBC2 33MM-122429HBC2 33MM-182429HBC2 33MM-212429HBC2 33MM-242429HBC2 33MM-122432HBC2 33MM-182432HBC2 33MM-212432HBC2 33MM-242432HBC2 33MM-301414HBC2 34MM-361414HBC2 34MM-301416HBC2 34MM-361416HBC2 34MM-301429HBC2 34MM-361429HBC2 34MM-301432HBC2 34MM-361432HBC2 34MM-301814HBC2 34MM-361814HBC2 34MM-301816HBC2 34MM-361816HBC2 34
MM-301829HBC2 34MM-361829HBC2 34MM-301832HBC2 34MM-361832HBC2 34MM-302414HBC2 34MM-362414HBC2 34MM-302416HBC2 34MM-362416HBC2 34MM-302429HBC2 34MM-362429HBC2 34MM-302432HBC2 34MM-362432HBC2 34MM-121429HBC3 35MM-181429HBC3 35MM-211429HBC3 35MM-241429HBC3 35MM-121432HBC3 35MM-181432HBC3 35MM-211432HBC3 35MM-241432HBC3 35MM-121829HBC3 35MM-181829HBC3 35MM-211829HBC3 35MM-241829HBC3 35MM-121832HBC3 35MM-181832HBC3 35MM-211832HBC3 35MM-241832HBC3 35MM-122429HBC3 35MM-182429HBC3 35MM-212429HBC3 35MM-242429HBC3 35MM-122432HBC3 35MM-182432HBC3 35MM-212432HBC3 35MM-242432HBC3 35MM-301429HBC3 35MM-361429HBC3 35MM-301432HBC3 35MM-361432HBC3 35MM-301829HBC3 35MM-361829HBC3 35MM-301832HBC3 35MM-361832HBC3 35MM-302429HBC3 35MM-362429HBC3 35MM-302432HBC3 35MM-362432HBC3 35MM-121429HBC4 36MM-181429HBC4 36MM-211429HBC4 36MM-241429HBC4 36MM-121432HBC4 36MM-181432HBC4 36MM-211432HBC4 36MM-241432HBC4 36MM-121829HBC4 36MM-181829HBC4 36MM-211829HBC4 36MM-241829HBC4 36MM-121832HBC4 36MM-181832HBC4 36MM-211832HBC4 36MM-241832HBC4 36MM-122429HBC4 36MM-182429HBC4 36
MM-212429HBC4 36MM-242429HBC4 36MM-122432HBC4 36MM-182432HBC4 36MM-212432HBC4 36MM-242432HBC4 36MM-301429HBC4 36MM-361429HBC4 36MM-301432HBC4 36MM-361432HBC4 36MM-301829HBC4 36MM-361829HBC4 36MM-301832HBC4 36MM-361832HBC4 36MM-302429HBC4 36MM-362429HBC4 36MM-302432HBC4 36MM-362432HBC4 36MM-301414HBCD 37MM-361414HBCD 37MM-301416HBCD 37MM-361416HBCD 37MM-301429HBCD 37MM-361429HBCD 37MM-301432HBCD 37MM-361432HBCD 37MM-301814HBCD 37MM-361814HBCD 37MM-301816HBCD 37MM-361816HBCD 37MM-301829HBCD 37MM-361829HBCD 37MM-301832HBCD 37MM-361832HBCD 37MM-302414HBCD 37MM-362414HBCD 37MM-302416HBCD 37MM-362416HBCD 37MM-302429HBCD 37MM-362429HBCD 37MM-302432HBCD 37MM-362432HBCD 37MM-301429HBCDD 38MM-361429HBCDD 38MM-301432HBCDD 38MM-361432HBCDD 38MM-301829HBCDD 38MM-361829HBCDD 38MM-301832HBCDD 38MM-361832HBCDD 38MM-302429HBCDD 38MM-362429HBCDD 38MM-302432HBCDD 38MM-362432HBCDD 38MM-241829HBSC 39MM-241832HBSC 39MM-242429HBSC 39MM-242432HBSC 39MM-301829HBSC 40MM-361829HBSC 40MM-301832HBSC 40MM-361832HBSC 40MM-302429HBSC 40MM-362429HBSC 40MM-302432HBSC 40MM-362432HBSC 40
108.
index by model number
MM-614BF 41MM-616BF 41MM-629BF 41MM-632BF 41MM-814CBF 41MM-816CBF 41MM-829CBF 41MM-832CBF 41MM-1214TWBL 43MM-1814TWBL 43MM-2114TWBL 43MM-2414TWBL 43MM-3014TWBL 43MM-3614TWBL 43MM-4214TWBL 43MM-4814TWBL 43MM-5414TWBL 43MM-6014TWBL 43MM-6614TWBL 43MM-7214TWBL 43MM-7814TWBL 43MM-8414TWBL 43MM-9014TWBL 43MM-9614TWBL 43MM-10214TWBL 43MM-10814TWBL 43MM-11414TWBL 43MM-12014TWBL 43MM-12614TWBL 43MM-13214TWBL 43MM-13814TWBL 43MM-14414TWBL 43MM-1218TWBL 44MM-1818TWBL 44MM-2118TWBL 44MM-2418TWBL 44MM-3018TWBL 44MM-3618TWBL 44MM-4218TWBL 44MM-4818TWBL 44MM-5418TWBL 44MM-6018TWBL 44MM-6618TWBL 44MM-7218TWBL 44MM-7818TWBL 44MM-8418TWBL 44MM-9018TWBL 44MM-9618TWBL 44MM-10218TWBL 44MM-10818TWBL 44MM-11418TWBL 44MM-12018TWBL 44MM-12618TWBL 44MM-13218TWBL 44MM-13818TWBL 44MM-14418TWBL 44MM-1224TWBL 44MM-1824TWBL 44MM-2124TWBL 44MM-2424TWBL 44MM-3024TWBL 44MM-3624TWBL 44MM-4224TWBL 44MM-4824TWBL 44MM-5424TWBL 44MM-6024TWBL 44
MM-6624TWBL 44MM-7224TWBL 44MM-7824TWBL 44MM-8424TWBL 44MM-9024TWBL 44MM-9624TWBL 44MM-10224TWBL 44MM-10824TWBL 44MM-11424TWBL 44MM-12024TWBL 44MM-12624TWBL 44MM-13224TWBL 44MM-13824TWBL 44MM-14424TWBL 44MM-3030CTWBL 45MM-3034CTWBL 45MM-3040CTWBL 45MM-3430CTWBL 45MM-3434CTWBL 45MM-3440CTWBL 45MM-4030CTWBL 45MM-4034CTWBL 45MM-4040CTWBL 45MM-1214TWBS 46MM-1814TWBS 46MM-2114TWBS 46MM-2414TWBS 46MM-3014TWBS 46MM-3614TWBS 46MM-4214TWBS 46MM-4814TWBS 46MM-5414TWBS 46MM-6014TWBS 46MM-6614TWBS 46MM-7214TWBS 46MM-7814TWBS 46MM-8414TWBS 46MM-9014TWBS 46MM-9614TWBS 46MM-10214TWBS 46MM-10814TWBS 46MM-11414TWBS 46MM-12014TWBS 46MM-12614TWBS 46MM-13214TWBS 46MM-13814TWBS 46MM-14414TWBS 46MM-1218TWBS 47MM-1818TWBS 47MM-2118TWBS 47MM-2418TWBS 47MM-3018TWBS 47MM-3618TWBS 47MM-4218TWBS 47MM-4818TWBS 47MM-5418TWBS 47MM-6018TWBS 47MM-6618TWBS 47MM-7218TWBS 47MM-7818TWBS 47MM-8418TWBS 47MM-9018TWBS 47MM-9618TWBS 47MM-10218TWBS 47MM-10818TWBS 47MM-11418TWBS 47
MM-12018TWBS 47MM-12618TWBS 47MM-13218TWBS 47MM-13818TWBS 47MM-14418TWBS 47MM-1224TWBS 47MM-1824TWBS 47MM-2124TWBS 47MM-2424TWBS 47MM-3024TWBS 47MM-3624TWBS 47MM-4224TWBS 47MM-4824TWBS 47MM-5424TWBS 47MM-6024TWBS 47MM-6624TWBS 47MM-7224TWBS 47MM-7824TWBS 47MM-8424TWBS 47MM-9024TWBS 47MM-9624TWBS 47MM-10224TWBS 47MM-10824TWBS 47MM-11424TWBS 47MM-12024TWBS 47MM-12624TWBS 47MM-13224TWBS 47MM-13824TWBS 47MM-14424TWBS 47MM-3030CTWBS 48MM-3034CTWBS 48MM-3040CTWBS 48MM-3430CTWBS 48MM-3434CTWBS 48MM-3440CTWBS 48MM-4030CTWBS 48MM-4034CTWBS 48MM-4040CTWBS 48MM-1521SB 49MM-121424UC 51MM-181424UC 51MM-211424UC 51MM-121430UC 51MM-181430UC 51MM-211430UC 51MM-241424UC 51MM-301424UC 51MM-361424UC 51MM-241430UC 51MM-301430UC 51MM-361430UC 51MM-121429UCS 51MM-181429UCS 51MM-211429UCS 51MM-121435UCS 51MM-181435UCS 51MM-211435UCS 51MM-241429UCS 51MM-301429UCS 51MM-361429UCS 51MM-241435UCS 51MM-301435UCS 51MM-361435UCS 51MM-121424UCD 52MM-181424UCD 52MM-211424UCD 52
109.
index by model number
MM-121430UCD 52MM-181430UCD 52MM-211430UCD 52MM-121429UCDS 52MM-181429UCDS 52MM-211429UCDS 52MM-121435UCDS 52MM-181435UCDS 52MM-211435UCDS 52MM-121424UCL 53MM-181424UCL 53MM-211424UCL 53MM-121430UCL 53MM-181430UCL 53MM-211430UCL 53MM-241424UCL 53MM-301424UCL 53MM-361424UCL 53MM-241430UCL 53MM-301430UCL 53MM-361430UCL 53MM-121429UCLS 53MM-181429UCLS 53MM-211429UCLS 53MM-121435UCLS 53MM-181435UCLS 53MM-211435UCLS 53MM-241429UCLS 53MM-301429UCLS 53MM-361429UCLS 53MM-241435UCLS 53MM-301435UCLS 53MM-361435UCLS 53MM-241424UCD 54MM-301424UCD 54MM-361424UCD 54MM-241430UCD 54MM-301430UCD 54MM-361430UCD 54MM-241429UCDS 54MM-301429UCDS 54MM-361429UCDS 54MM-241435UCDS 54MM-301435UCDS 54MM-361435UCDS 54MM-624UF 55MM-630UF 55MM-629UFS 55MM-635UFS 55MM-121466SC 57MM-151466SC 57MM-181466SC 57MM-241466SC 57MM-121472SC 57MM-151472SC 57MM-181472SC 57MM-241472SC 57MM-121478SC 57MM-151478SC 57MM-181478SC 57MM-241478SC 57MM-121484SC 57MM-151484SC 57MM-181484SC 57MM-241484SC 57MM-121866SC 57
MM-151866SC 57MM-181866SC 57MM-241866SC 57MM-121872SC 57MM-151872SC 57MM-181872SC 57MM-241872SC 57MM-121878SC 57MM-151878SC 57MM-181878SC 57MM-241878SC 57MM-121884SC 57MM-151884SC 57MM-181884SC 57MM-241884SC 57MM-122466SC 57MM-152466SC 57MM-182466SC 57MM-242466SC 57MM-122472SC 57MM-152472SC 57MM-182472SC 57MM-242472SC 57MM-122478SC 57MM-122478SC 57MM-182478SC 57MM-242478SC 57MM-122484SC 58MM-152484SC 58MM-182484SC 58MM-242484SC 58MM-301466SC 58MM-361466SC 58MM-301472SC 58MM-361472SC 58MM-301478SC 58MM-361478SC 58MM-301484SC 58MM-361484SC 58MM-301866SC 58MM-361866SC 58MM-301872SC 58MM-361872SC 58MM-301878SC 58MM-361878SC 58MM-301884SC 58MM-361884SC 58MM-302466SC 58MM-362466SC 58MM-302472SC 58MM-362472SC 58MM-302478SC 58MM-362478SC 58MM-302484SC 58MM-362484SC 58MM-121866DSSC 59MM-151866DSSC 59MM-181866DSSC 59MM-241866DSSC 59MM-122466DSSC 59MM-152466DSSC 59MM-182466DSSC 59MM-242466DSSC 59MM-121872DSSC 59MM-151872DSSC 59MM-181872DSSC 59
MM-241872DSSC 59MM-122472DSSC 59MM-152472DSSC 59MM-182472DSSC 59MM-242472DSSC 59MM-121878DSSC 59MM-151878DSSC 59MM-181878DSSC 59MM-241878DSSC 59MM-122478DSSC 59MM-152478DSSC 59MM-182478DSSC 59MM-242478DSSC 59MM-121884DSSC 59MM-151884DSSC 59MM-241884DSSC 59MM-122484DSSC 59MM-152484DSSC 59MM-182484DSSC 59MM-242484DSSC 59MM-121471SCS 60MM-151471SCS 60MM-181471SCS 60MM-241471SCS 60MM-121477SCS 60MM-151477SCS 60MM-181477SCS 60MM-241477SCS 60MM-121483SCS 60MM-151483SCS 60MM-181483SCS 60MM-241483SCS 60MM-121489SCS 60MM-151489SCS 60MM-181489SCS 60MM-241489SCS 60MM-121872SCS 60MM-151872SCS 60MM-181872SCS 60MM-241872SCS 60MM-121878SCS 60MM-151878SCS 60MM-181878SCS 60MM-241878SCS 60MM-121884SCS 60MM-151884SCS 60MM-181884SCS 60MM-241884SCS 60MM-121890SCS 60MM-151890SCS 60MM-181890SCS 60MM-241890SCS 60MM-122474SCS 60MM-152474SCS 60MM-182474SCS 60MM-242474SCS 60MM-122480SCS 60MM-152480SCS 60MM-182480SCS 60MM-242480SCS 60MM-122486SCS 60MM-152486SCS 60MM-182486SCS 60MM-242486SCS 60MM-122492SCS 61MM-152492SCS 61
110.
index by model number
MM-182492SCS 61MM-242492SCS 61MM-301471SCS 61MM-361471SCS 61MM-301477SCS 61MM-361477SCS 61MM-301483SCS 61MM-361483SCS 61MM-301489SCS 61MM-361489SCS 61MM-301872SCS 61MM-361872SCS 61MM-301878SCS 61MM-361878SCS 61MM-301884SCS 61MM-361884SCS 61MM-301890SCS 61MM-361890SCS 61MM-302474SCS 61MM-362474SCS 61MM-302480SCS 61MM-362480SCS 61MM-302486SCS 61MM-362486SCS 61MM-302492SCS 61MM-362492SCS 61MM-121466SCD 62, 81MM-151466SCD 62, 81MM-181466SCD 62, 81MM-241466SCD 62, 81MM-121472SCD 62, 81MM-151472SCD 62, 81MM-181472SCD 62, 81MM-241472SCD 62, 81MM-121478SCD 62, 81MM-151478SCD 62, 81MM-181478SCD 62, 81MM-241478SCD 62, 81MM-121484SCD 62, 81MM-151484SCD 62, 81MM-181484SCD 62, 81MM-241484SCD 62, 81MM-121866SCD 62, 81MM-151866SCD 62, 81MM-181866SCD 62, 81MM-241866SCD 62, 81MM-121872SCD 62, 81MM-151872SCD 62, 81MM-181872SCD 62, 81MM-241872SCD 62, 81MM-121878SCD 62, 81MM-151878SCD 62, 81MM-181878SCD 62, 81MM-241878SCD 62, 81MM-121884SCD 62, 81MM-151884SCD 62, 81MM-181884SCD 62, 81MM-241884SCD 62, 81MM-122466SCD 62, 81MM-152466SCD 62, 81MM-182466SCD 62, 81MM-242466SCD 62, 81MM-122472SCD 62, 81MM-152472SCD 62, 81MM-182472SCD 62, 81MM-242472SCD 62, 81
MM-122478SCD 62, 81MM-152478SCD 62, 81MM-182478SCD 62, 81MM-242478SCD 62, 81MM-122484SCD 62, 81MM-152484SCD 62, 81MM-182484SCD 62, 81MM-242484SCD 62, 81MM-121866DSSCD 63MM-151866DSSCD 63MM-181866DSSCD 63MM-241866DSSCD 63MM-122466DSSCD 63MM-152466DSSCD 63MM-182466DSSCD 63MM-242466DSSCD 63MM-121872DSSCD 63MM-151872DSSCD 63MM-181872DSSCD 63MM-241872DSSCD 63MM-121872DSSCD 63MM-122472DSSCD 63MM-152472DSSCD 63MM-182472DSSCD 63MM-242472DSSCD 63MM-121878DSSCD 63MM-151878DSSCD 63MM-181878DSSCD 63MM-241878DSSCD 63MM-122478DSSCD 63MM-152478DSSCD 63MM-182478DSSCD 63MM-242478DSSCD 63MM-121884DSSCD 63MM-151884DSSCD 63MM-181884DSSCD 63MM-241884DSSCD 63MM-122484DSSCD 63MM-152484DSSCD 63MM-182484DSSCD 63MM-242484DSSCD 63MM-121471SCDS 64, 82MM-151471SCDS 64, 82MM-181471SCDS 64, 82MM-241471SCDS 64, 82MM-121477SCDS 64, 82MM-151477SCDS 64, 82MM-181477SCDS 64, 82MM-241477SCDS 64, 82MM-121483SCDS 64, 82MM-151483SCDS 64, 82MM-181483SCDS 64, 82MM-241483SCDS 64, 82MM-121489SCDS 64, 82MM-151489SCDS 64, 82MM-181489SCDS 64, 82MM-241489SCDS 64, 82MM-121872SCDS 64, 82MM-151872SCDS 64, 82MM-181872SCDS 64, 82MM-241872SCDS 64, 82MM-121878SCDS 64, 82MM-151878SCDS 64, 82MM-181878SCDS 64, 82MM-241878SCDS 64, 82MM-121884SCDS 64, 82
MM-151884SCDS 64, 82MM-181884SCDS 64, 82MM-241884SCDS 64, 82MM-121890SCDS 64, 82MM-151890SCDS 64, 82MM-181890SCDS 64, 82MM-241890SCDS 64, 82MM-122474SCDS 64, 82MM-152474SCDS 64, 82MM-182474SCDS 64, 82MM-242474SCDS 64, 82MM-122480SCDS 64, 82MM-152480SCDS 64, 82MM-182480SCDS 64, 82MM-242480SCDS 64, 82MM-122486SCDS 64, 82MM-152486SCDS 64, 82MM-182486SCDS 64, 82MM-242486SCDS 64, 82MM-122492SCDS 64, 82MM-152492SCDS 64, 82MM-182492SCDS 64, 82MM-242492SCDS 64, 82MM-301466SCD 65MM-361466SCD 65MM-301472SCD 65MM-361472SCD 65MM-301478SCD 65MM-361478SCD 65MM-301484SCD 65MM-361484SCD 65MM-301866SCD 65MM-361866SCD 65MM-301872SCD 65MM-361872SCD 65MM-301878SCD 65MM-361878SCD 65MM-301884SCD 65MM-361884SCD 65MM-302466SCD 65MM-362466SCD 65MM-302472SCD 65MM-362472SCD 65MM-302478SCD 65MM-362478SCD 65MM-302484SCD 65MM-362484SCD 65MM-301471SCDS 66MM-361471SCDS 66MM-301477SCDS 66MM-361477SCDS 66MM-301483SCDS 66MM-361483SCDS 66MM-301489SCDS 66MM-361489SCDS 66MM-301872SCDS 66MM-361872SCDS 66MM-301878SCDS 66MM-361878SCDS 66MM-301884SCDS 66MM-361884SCDS 66MM-301890SCDS 66MM-361890SCDS 66MM-302474SCDS 66MM-362474SCDS 66MM-302480SCDS 66
111.
index by model number
MM-362480SCDS 66MM-302486SCDS 66MM-362486SCDS 66MM-302492SCDS 66MM-362492SCDS 66MM-61466SF 67MM-61472SF 67MM-61478SF 67MM-61484SF 67MM-61866SF 67MM-61872SF 67MM-61878SF 67MM-61884SF 67MM-62466SF 67MM-62472SF 67MM-62478SF 67MM-62484SF 67MM-61471SFS 68MM-61477SFS 68MM-61483SFS 68MM-61489SFS 68MM-61872SFS 68MM-61878SFS 68MM-61884SFS 68MM-61890SFS 68MM-62474SFS 68MM-62480SFS 68MM-62486SFS 68MM-62492SFS 68MM-211845MC 69MM-241845MC 69MM-211845MCM 69MM-241845MCM 69MM-211845MCD 70MM-241845MCD 70MM-211845DSMC 71MM-241845DSMC 71MM-212445DSMC 71MM-242445DSMC 71MM-211845DSMCM 71MM-241845DSMCM 71MM-212445DSMCM 71MM-242445DSMCM 71MM-211845DSMCD 72MM-241845DSMCD 72MM-212445DSMCD 72MM-242445DSMCD 72MM-332337MNS 73MM-392337MNS 73MM-332337MNS3 74MM-392327MNS3 74MM-332337MNS4 74MM-392337MNS4 74MM-332337MNSDD 74MM-392337MNSDD 74MM-121845DSSS 75MM-151845DSSS 75MM-181845DSSS 75MM-241845DSSS 75MM-122445DSSS 75MM-152445DSSS 75MM-182445DSSS 75MM-242445DSSS 75MM-121845DSSSD 76MM-151845DSSSD 76MM-181845DSSSD 76
MM-241845DSSSD 76MM-122445DSSSD 76MM-152445DSSSD 76MM-182445DSSSD 76MM-242445DSSSD 76MM-201313BC 77MM-201313BCD 78MM-201313BC2 79MM-121466SCD 81MM-151466SCD 81MM-121466SCD 81MM-121466SCD2 83MM-151466SCD2 83MM-181466SCD2 83MM-241466SCD2 83MM-121472SCD2 83MM-151472SCD2 83MM-181472SCD2 83MM-241472SCD2 83MM-121478SCD2 83MM-151478SCD2 83MM-181478SCD2 83MM-241478SCD2 83MM-121484SCD2 83MM-151484SCD2 83MM-181484SCD2 83MM-241484SCD2 83MM-121866SCD2 83MM-151866SCD2 83MM-181866SCD2 83MM-241866SCD2 83MM-121872SCD2 83MM-151872SCD2 83MM-181872SCD2 83MM-241872SCD2 83MM-121878SCD2 83MM-151878SCD2 83MM-181878SCD2 83MM-241878SCD2 83MM-121884SCD2 83MM-151884SCD2 83MM-181884SCD2 83MM-241884SCD2 83MM-122466SCD2 83MM-152466SCD2 83MM-182466SCD2 83MM-242466SCD2 83MM-122472SCD2 83MM-152472SCD2 83MM-182472SCD2 83MM-242472SCD2 83MM-122478SCD2 83MM-152478SCD2 83MM-182478SCD2 83MM-242478SCD2 83MM-122484SCD2 83MM-152484SCD2 83MM-182484SCD2 83MM-242484SCD2 83MM-121466SCD2S 84MM-151466SCD2S 84MM-181466SCD2S 84MM-241466SCD2S 84MM-121472SCD2S 84MM-151472SCD2S 84MM-181472SCD2S 84
MM-241472SCD2S 84MM-121478SCD2S 84MM-151478SCD2S 84MM-181478SCD2S 84MM-241478SCD2S 84MM-121484SCD2S 84MM-151484SCD2S 84MM-181484SCD2S 84MM-241484SCD2S 84MM-121866SCD2S 84MM-151866SCD2S 84MM-181866SCD2S 84MM-241866SCD2S 84MM-121872SCD2S 84MM-151872SCD2S 84MM-181872SCD2S 84MM-241872SCD2S 84MM-121878SCD2S 84MM-151878SCD2S 84MM-181878SCD2S 84MM-241878SCD2S 84MM-121884SCD2S 84MM-151884SCD2S 84MM-181884SCD2S 84MM-241884SCD2S 84MM-122466SCD2S 84MM-152466SCD2S 84MM-182466SCD2S 84MM-242466SCD2S 84MM-122472SCD2S 84MM-152472SCD2S 84MM-182472SCD2S 84MM-242472SCD2S 84MM-122478SCD2S 84MM-152478SCD2S 84MM-182478SCD2S 84MM-242478SCD2S 84MM-122484SCD2S 84MM-152484SCD2S 84MM-182484SCD2S 84MM-242484SCD2S 84MM-121466SCD4 85MM-151466SCD4 85MM-181466SCD4 85MM-241466SCD4 85MM-121472SCD4 85MM-151472SCD4 85MM-181472SCD4 85MM-241472SCD4 85MM-121478SCD4 85MM-151478SCD4 85MM-181478SCD4 85MM-241478SCD4 85MM-121484SCD4 85MM-151484SCD4 85MM-181484SCD4 85MM-241484SCD4 85MM-121866SCD4 85MM-151866SCD4 85MM-181866SCD4 85MM-241866SCD4 85MM-121872SCD4 85MM-151872SCD4 85MM-181872SCD4 85MM-241872SCD4 85MM-121878SCD4 85
112.
index by model number
MM-151878SCD4 85MM-181878SCD4 85MM-241878SCD4 85MM-121884SCD4 85MM-151884SCD4 85MM-181884SCD4 85MM-241884SCD4 85MM-122466SCD4 85MM-152466SCD4 85MM-182466SCD4 85MM-242466SCD4 85MM-122472SCD4 85MM-152472SCD4 85MM-182472SCD4 85MM-242472SCD4 85MM-122478SCD4 85MM-152478SCD4 85MM-182478SCD4 85MM-242478SCD4 85MM-122484SCD4 85MM-152484SCD4 85MM-182484SCD4 85MM-242484SCD4 85MM-121466SCD4S 86MM-151466SCD4S 86MM-181466SCD4S 86MM-241466SCD4S 86MM-121472SCD4S 86MM-151472SCD4S 86MM-181472SCD4S 86MM-241472SCD4S 86MM-121478SCD4S 86MM-151478SCD4S 86MM-181478SCD4S 86MM-241478SCD4S 86MM-121484SCD4S 86MM-151484SCD4S 86MM-181484SCD4S 86MM-241484SCD4S 86MM-121866SCD4S 86MM-151866SCD4S 86MM-181866SCD4S 86MM-241866SCD4S 86MM-121872SCD4S 86MM-151872SCD4S 86MM-181872SCD4S 86MM-241872SCD4S 86MM-121878SCD4S 86MM-151878SCD4S 86MM-181878SCD4S 86MM-241878SCD4S 86MM-121884SCD4S 86MM-151884SCD4S 86MM-181884SCD4S 86MM-241884SCD4S 86MM-122466SCD4S 86MM-152466SCD4S 86MM-182466SCD4S 86MM-242466SCD4S 86MM-122472SCD4S 86MM-152472SCD4S 86MM-182472SCD4S 86MM-242472SCD4S 86MM-122478SCD4S 86MM-152478SCD4S 86MM-182478SCD4S 86
MM-242478SCD4S 86MM-122484SCD4S 86MM-152484SCD4S 86MM-182484SCD4S 86MM-242484SCD4S 86MM-301466SCDD 87MM-361466SCDD 87MM-301472SCDD 87MM-361472SCDD 87MM-301478SCDD 87MM-361478SCDD 87MM-301484SCDD 87MM-361484SCDD 87MM-301866SCDD 87MM-361866SCDD 87MM-301872SCDD 87MM-361872SCDD 87MM-301878SCDD 87MM-361878SCDD 87MM-301884SCDD 87MM-361884SCDD 87MM-302466SCDD 87MM-362466SCDD 87MM-302472SCDD 87MM-362472SCDD 87MM-302478SCDD 87MM-362478SCDD 87MM-302484SCDD 87MM-362484SCDD 87MM-301466SCDDS 88MM-361466SCDDS 88MM-301472SCDDS 88MM-361472SCDDS 88MM-301478SCDDS 88MM-361478SCDDS 88MM-301484SCDDS 88MM-361484SCDDS 88MM-301866SCDDS 88MM-361866SCDDS 88MM-301872SCDDS 88MM-361872SCDDS 88MM-301878SCDDS 88MM-361878SCDDS 88MM-301884SCDDS 88MM-361884SCDDS 88MM-302466SCDDS 88MM-362466SCDDS 88MM-302472SCDDS 88MM-362472SCDDS 88MM-302478SCDDS 88MM-362478SCDDS 88MM-302484SCDDS 88MM-362484SCDDS 88MM-241819BC 90MM-301819BC 90MM-361819BC 90MM-481819BC 90MM-242419BC 90MM-302419BC 90MM-362419BC 90MM-482419BC 90MM-241819BCC 90MM-301819BCC 90MM-361819BCC 90MM-481819BCC 90MM-242419BCC 90
MM-302419BCC 90MM-362419BCC 90MM-482419BCC 90MM-2418BC 91MM-3018BC 91MM-3618BC 91MM-4818BC 91MM-2424BC 91MM-3024BC 91MM-3624BC 91MM-4824BC 91MM-241819DSBC 92MM-301819DSBC 92MM-361819DSBC 92MM-481819DSBC 92MM-242419DSBC 92MM-302419DSBC 92MM-362419DSBC 92MM-482419DSBC 92MM-2418DSBC 93MM-3018DSBC 93MM-3618DSBC 93MM-4818DSBC 93MM-2424DSBC 93MM-3024DSBC 93MM-3624DSBC 93MM-4824DSBC 93MM-2424WP 95MM-3624WP 95MM-4824WP 95MM-5224WP 95MM-6024WP 95MM-2432WP 95MM-3632WP 95MM-4832WP 95MM-5232WP 95MM-6032WP 95MM-2440WP 95MM-3640WP 95MM-4840WP 95MM-5240WP 95MM-6040WP 95MM-2472WP 95MM-3672WP 95MM-4872WP 95MM-5272WP 95MM-6072WP 95MM-2478WP 95MM-3678WP 95MM-4878WP 95MM-5278WP 95MM-6078WP 95MM-2484WP 95MM-3684WP 95MM-4884WP 95MM-5284WP 95MM-6084WP 95MM-2426WPS 96MM-3626WPS 96MM-4826WPS 96MM-5226WPS 96MM-6026WPS 96MM-2434WPS 96MM-3634WPS 96MM-4834WPS 96MM-5234WPS 96
113.
index by model number
MM-6034WPS 96MM-2442WPS 96MM-3642WPS 96MM-4842WPS 96MM-5242WPS 96MM-6042WPS 96MM-2474WPS 96MM-3674WPS 96MM-4874WPS 96MM-5274WPS 96MM-6074WPS 96MM-2480WPS 96MM-3680WPS 96MM-4880WPS 96MM-5280WPS 96MM-6080WPS 96MM-2486WPS 96MM-3686WPS 96MM-4886WPS 96MM-5286WPS 96MM-6086WPS 96MM-2424WC 97MM-3624WC 97MM-4824WC 97MM-5224WC 97MM-6024WC 97MM-2432WC 97MM-3632WC 97MM-4832WC 97MM-5232WC 97MM-6032WC 97MM-2440WC 97MM-3640WC 97MM-4840WC 97MM-5240WC 97MM-6040WC 97MM-2472WC 97MM-3672WC 97MM-4872WC 97MM-5272WC 97MM-6072WC 97MM-2478WC 97MM-3678WC 97MM-4878WC 97MM-5278WC 97MM-6078WC 97MM-2484WC 97MM-3684WC 97MM-4884WC 97MM-5284WC 97MM-6084WC 97MM-2426WCS 98MM-3626WCS 98MM-4826WCS 98MM-5226WCS 98MM-6026WCS 98MM-2434WCS 98MM-3634WCS 98MM-4834WCS 98MM-5234WCS 98MM-6034WCS 98MM-2442WCS 98MM-3642WCS 98MM-4842WCS 98MM-5242WCS 98MM-6042WCS 98
MM-2474WCS 98MM-3674WCS 98MM-4874WCS 98MM-5274WCS 98MM-6074WCS 98MM-2480WCS 98MM-3680WCS 98MM-4880WCS 98MM-5280WCS 98MM-6080WCS 98MM-2486WCS 98MM-3686WCS 98MM-4886WCS 98MM-5286WCS 98MM-6086WCS 98TL-14 99TL-17 99TL-18 99TL-19 99DC-1 99DC-2 99DC-3 99DC-4 99DC-5 99MGT-1 99