microsoft 70-680 exam bundle · pdf filemicrosoft 70-680 exam bundle exam name: microsoft ts:...

MICROSOFT 70-680 EXAM BUNDLE

Number: 70-680Passing Score: 800Time Limit: 120 minFile Version: 32.2

http://www.gratisexam.com/

MICROSOFT 70-680 EXAM BUNDLE

Exam Name: Microsoft TS: Windows 7, Configuring

selftestengine

QUESTION 1You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains both desktop and laptopworkstations.

You are responsible for managing a desktop workstation named CERTKILLER-WS620. CERTKILLER-WS620is configured to run Windows Vista. You install Windows 7 on a new partition on CERTKILLER-WS620 but youwant Windows Vista to be booted by default on CERTKILLER-WS620 and not Windows 7.

What should you do?

A. You should consider running Bcdedit.exe and specifying the /default parameter.B. You should consider creating a boot.ini file in the root of the Windows 7 partition.C. You should consider running Bcdedit.exe and specifying the /bootems parameter.D. You should consider creating a boot.ini file in the root of the Windows Vista partition.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:To modify the boot parameters in Vista and Windows 7, use the command line tool Bcdedit.exe. Using the /default switch will allow you to set the default system to boot. BCD = Boot Configuration Data You can alsochange the default boot settings in Control Panel -> System & Security -> System -> Advanced System Settings(on the left hand side), -> Startup & Recovery -> Settings Incorrect answers B, D: The Boot.ini file is no longerused by Vista or Windows 7.C: The switch / bootems cause Windows 7 to boot into the "Emergency Management System" which is notrequired in this scenario.Note that since the boot.ini file is no longer used, the command bootcfg.exe is not applicable.

ActualTests.com

QUESTION 2You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You are responsible for maintaining CertKiller.com's Windows 7workstations.

You want to configure all Windows 7 workstations to produce a new Security ID (SID) as well as a Welcomescreen every time the workstation is booted.

What should you do?

A. You should consider running Msconfig.exe and select Diagnostic startup on all Windows 7 workstations."Pass Any Exam. Any Time." - www.actualtests.com 2Microsoft 70-680: Practice Exam

B. You should consider running Sysprep.exe /audit /generalize on all Windows 7 workstations.C. You should consider running Msconfig.exe and select Selective startup on all Windows 7 workstations.D. You should consider running Sysprep.exe /oobe /generalize on all Windows 7 workstations.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

Explanation:The utility Sysprep is used to prepare systems before imaging and deployment. the switch/ oobe means "Out Ofthe Box Experience" which will cause the new image to start up fresh just as if in came out of the shrink-wrap.The /generalize command is required in order for the install to create a new SID.

Incorrect Answers:A: Msconfig is a utility that is used to change the behavoir of the boot sequence for diagnostic ActualTests.compurposes. This utility is not used in the Windows 7 deployment process. (See attached image)B: Audit mode enables OEMs and corporations to customize a Windows installation before shipping thecomputer to an end-user. In audit mode, you can install applications, add device drivers, run scripts, and testthe validity of a Windows installation. Audit mode is a networked- enabled environment that does not requiresettings in Windows Welcome to be applied.C: Msconfig is a utility that is used to change the behavoir of the boot sequence for diagnostic purposes. Thisutility is not used in the Windows 7 deployment process. (See attached image)

QUESTION 3You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com.

"Pass Any Exam. Any Time." - www.actualtests.com 3Microsoft 70-680: Practice Exam

CertKiller.com purchases a new client computer named CERTKILLER-WS680. You have been instructed toperform an automated installation of Microsoft Windows 7 on CERTKILLER-WS680 using the MicrosoftWindows 7 DVD.

What should you do?

A. You should consider creating an answer file named oobe.xml and copying it to a network share.B. You should consider creating an answer file named winnt.sif and copying it to a removable drive.C. You should consider creating an answer file named sysprep.inf and copying it to a network share.

D. You should consider creating an answer file named autounattend.xml and copying it to a removable drive.


Explanation/Reference:Explanation:When Windows 7 is booted from the DVD, it automatically searches for an answer file called autounattend.xml.If it finds such a file, it will use that to answer all of the configuration questions.Incorrect Answers:A: The OOBE.XML file is not an installation answer file. Oobe.xml is a content file used to collect text andimages for customizing Windows Welcome, Welcome Center, and ISP Signup.B: Winnt.sif is the Windows XP autoanswer file name.C: The Sysprep.inf answer file is a text file that scripts the answers for a series of graphical user interface (GUI)dialog boxes in Windows XP

QUESTION 4You work as the desktop support technician at CertKiller.com. The CertKiller.com network consistsActualTests.comof a single Active Directory domain named CertKiller.com.

You need to perform a clean installation of Microsoft Windows 7 Professional on the workstations in theResearch department. All workstations in the Research department have identical hardware as listed below:1.2 GHz Dual-Core processor.1024 MB of RAM.20 GB hard drive.DirectX 10 video display card.Integratedsound card.10/100 integrated network adapter.

You need to ensure that the workstations able to support Windows 7 and are able to support Windows XPmode.

What should you do? (Each correct answer presents part of the solution. Choose two.)


A. You should upgrade the processor.B. You should upgrade the RAM.C. You should upgrade the video card.D. You should upgrade the hard drive.E. You should upgrade the network adapter.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:Although the workstations meet the system requirements for Windows 7, and additional 1 GB of RAM and anadditional 15 GB hard drive space is required to support Windows XP Mode.

QUESTION 5CertKiller.com has employed you as a network Administrator. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You are in the process of planning the installation of Windows 7on a client computer named CERTKILLER-WS06. CERTKILLER-WS06 contains a single hard disk drive that isconnected to a RAID controller.

Whilst doing the installation you notice that the installation media of Windows 7 does not include the necessaryfiles to install the RAID controller. You have to make sure that you are able to install Windows 7 on the hard

disk drive.

What should you do?

A. You should consider having CERTKILLER-WS04 started from the Windows installation media.Then the Load Driver should be clicked from the Install Windows dialog box.

B. You should consider inserting the Windows installation media.Thereafter F8 should be pressed during the power-on self test (POST) of CERTKILLER-WS04.

C. You should consider having CERTKILLER-WS04 started from the Windows installation media.Then Drive options (advanced) should be clicked from the Install Windows dialog box.

D. You should consider inserting the Windows installation media.Thereafter F6 should be pressed during the power-on self test (POST) of CERTKILLER-WS04.



QUESTION 6ActualTests.comYou work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network client computers currently make use ofMicrosoft Windows XP Professional. You receive an instruction from Management to upgrade a client computernamed CERTKILLER-WS25 to Windows 7. You decide to do the installation using the Windows 7 DVD.

What should you do? (Choose all that apply.)

A. Your best option would be to execute an upgrade of Windows 7 by keeping all the Windows XP settings.B. Your best option would be to execute a full installation of Windows 7.C. Your best option would be to run setup.exe from the DVD in order to start the Windows 7 installation.


D. Your best option would be to make use of the autorun feature on the DVD in order to start the installation.

Correct Answer: BCDSection: (none)Explanation


QUESTION 7You are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. The CertKiller.com network client computers currentlymake use of Microsoft Windows XP Professional. CertKiller.com has recently decided to have the clientcomputers upgraded to Microsoft Windows 7 with all the installed applications. You are in the process ofinforming the newly appointed users in your department when the Aero Shake feature will work.ActualTests.comWhat should you inform them? (Choose all that apply.)

A. The Aero Shake feature will work if the Windows Experience Index is 3 or greater.B. The Aero Shake feature will work if the windows experience index is at least 2.C. The Aero Shake feature will work if the display adapter is compatible with the installed WDDM.D. The Aero Shake feature will work if the Aero features are downloaded from Microsoft.

Correct Answer: ACSection: (none)Explanation


QUESTION 8CertKiller.com has hired you as a network Administrator for their network. The CertKiller.com network clientcomputers currently make use of Microsoft Windows XP Professional. You receive


an instruction from one of the senior managers to upgrade his workstation to Windows 7. The senior manageralso informs you that the wants the Windows 7 games as well as Titan Chess is installed on his workstation.You thus need to identify the Windows 7 versions that will comply with the senior mangers request.


All the games including Titan Chess come with which versions of Windows 7? Choose two.

A. Your best option would be to install Windows Ultimate Edition.B. Your best option would be to install Windows Professional Edition.C. Your best option would be to install Windows Home Edition.D. Your best option would be to install Windows Enterprise Edition.

Correct Answer: ADSection: (none)Explanation


QUESTION 9You work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network client computers currently make use ofMicrosoft Windows XP Professional. CertKiller.com has recently decided to have the client computersupgraded to Microsoft Windows 7. You receive an instruction from the CIO to ensure that the Active Directorydomain can be joined to the Windows 7 Edition.

What should you do?

A. Your best option would be to install the Windows Professional Edition.B. Your best option would be to install the Windows Ultimate Edition.C. Your best option would be to install the Windows Home Edition.

ActualTests.comD. Your best option would be to install the Windows Enterprise Edition.

Correct Answer: ABDSection: (none)Explanation


QUESTION 10You are employed as the network Administrator at CertKiller.com. The CertKiller.com network client computersare configured to either use Windows XP Professional or Windows Vista. You receive an instruction frommanagement to identify the statement that is regarding Windows 7.

What should you do?

A. You should inform management that Outlook Express comes with Windows 7.B. You should inform management that Microsoft Outlook is comes with Windows 7.C. You should inform management that Windows 7 does not come with a preinstalled mail client.D. You should inform management that the MailCentral is the new default mail client with Windows 7.

Correct Answer: CSection: (none)Explanation


QUESTION 11"Pass Any Exam. Any Time." - www.actualtests.com 9Microsoft 70-680: Practice Exam

You are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. The CertKiller.com network client computers currentlymake use of Microsoft Windows XP Professional. You receive an instruction from the CIO to install Windows 7on a computer named CERTKILLER-SR01. During routine monitoring you discover that the OnlineCompatibility Check has failed during your installation. You thus need to determine the reason this occurred.

What should you identify? (Choose all that apply.)

A. The error occurred due to a display adapter with WDDM Support.B. The error occurred due to a display adapter without WDDM Support but with SVIDEO Support.C. The error occurred due to 512MB of RAM.D. The error occurred due to an 80 GB Hard Disk.

Correct Answer: BCSection: (none)Explanation


QUESTION 12You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows Vista (x86). During the course of the day you receive instructionfrom CertKiller.com to perform a clean installation of


Microsoft Windows 7 (64-bit) on a user named Rory Allen's computer.

What should you do?

A. You should consider having the computer started using the Windows 7 installation media.You should then have the Upgrade option selected from the Install Windows dialog box.

B. You should consider having the computer started using the Windows 7 installation media.You should then select the Custom (advanced) option from the Install Windows dialog box.

C. You should consider having the Rollback.exe command used from the Windows 7 installation media.D. You should consider having the Migsetup.exe command run from the Windows 7 installation media.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:Part 2: Upgrade to Windows 7 from previous versions of Windows (10 Questions)

QUESTION 13You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run WindowsXP Professional with Service Pack 1 (SP1).

You have been assigned a client computer named CERTKILLER-WS270. You want to upgrade CERTKILLER-WS270 to Windows 7 Professional without needing to install any of your applications. You verify thatCERTKILLER-WS270 meets the system requirements for Windows 7 by installing and running the Windows 7Upgrade Advisor.

What should you do next?

A. You should consider upgrading CERTKILLER-WS270 to Microsoft Windows Vista Business, and thenupgrade it to Windows 7 Professional.

B. You should consider installing Service Pack 3 (SP3) on CERTKILLER-WS270, and then upgrade it toWindows 7 Professional.

C. You should consider installing and running Windows Easy Transfer on CERTKILLER-WS270, and thenperform a clean installation of Windows 7 Professional.

D. You should consider installing and running Windows Easy Transfer on CERTKILLER-WS270, and thenupgrade it to Windows 7 Professional.


Explanation/Reference:ActualTests.comExplanation:To upgrade from Windows XP Professional to Windows 7 Professional without having to reinstall applications,you would need to upgrade to Windows Vista first.

QUESTION 14You work as the desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run WindowsVista Business.

You have been instructed to upgrade a client computer named CERTKILLER-WS620 to Microsoft Windows 7Professional. CERTKILLER-WS620 has the following specifications:ActualTests.comDrive C (system drive) has 12 gigabytes (GB) of free space.Drive D (data drive) has 40 GB of free space.Four

memory slots with two occupied by a 512 megabyte (MB) memory stick.One 2.0 gigahertz (GHz) 32-bitprocessor.

You need to ensure that Windows 7 Professional can be installed on CERTKILLER-WS620.

What should you do?

A. You should consider installing Windows 7 on Drive D.B. You should consider creating more free space on Drive C.C. You should consider upgrading the memory.D. You should consider upgrading the processor.



Explanation/Reference:Explanation:: During an upgrade, the Operating Systems must be installed on the system drive. However, the system driveon CERTKILLER-WS620 has only 12 GB of free space. Thus you should free up space on Drive C becauseWindows 7 requires 16 GB of free space for installation purposes.

QUESTION 15You are employed as the network Administrator at CertKiller.com. The CertKiller.com network client computerscurrently make use of Windows Vista Enterprise (x86). You are responsible for managing a client computernamed CERTKILLER-WS20. During the course of the day you receive instructions from CertKiller.com toidentify the Windows 7 version and edition CERTKILLER-WS20 can directly upgrade to.


What should you do?

A. Your best option would be to make use of Windows 7 Enterprise (x64).B. Your best option would be to make use of Windows 7 Home Professional (x86).C. Your best option would be to make use of Windows 7 Ultimate (x86).D. Your best option would be to make use of Windows 7 Ultimate (x64).



QUESTION 16You work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. You are in the process of determining when you need to execute amigration rather that an upgrade.


A. Your best option would be to migrate Windows Vista Business (x86) to Windows 7 Professional (x64).B. Your best option would be to migrate Windows Vista Enterprise (x64) to Windows 7 Enterprise (x64).C. Your best option would be to migrate Windows Vista Home Premium (x64) to Windows 7 Home Premium

(x86).D. Your best option would be to migrate Windows XP Professional (x64) to Windows 7 Professional (x64).

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:ActualTests.com

QUESTION 17You are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. You are responsible for a computer namedCERTKILLER-WS04. CERTKILLER-WS04 is configured to run Windows Vista Service Pack 2 (SP2). Duringthe course of the week you receive an instruction from the CIO to have CERTKILLER-WS04 upgraded toWindows 7.

What should you do?

A. This can be accomplished from Windows Vista by running Setup.exe from the Windows 7 installationmedia.Thereafter the Custom (advanced) option should be selected."Pass Any Exam. Any Time." - www.actualtests.com 15Microsoft 70-680: Practice Exam

B. This can be accomplished by starting CERTKILLER-WS04 from the Windows installation media.Thereafter the Upgrade option should be selected.

C. This can be accomplished by starting CERTKILLER-WS04 from the Windows 7 installation media.Thereafter the Custom (advanced) option should be selected.

D. This can be accomplished from Windows Vista by running Setup.exe from the Windows 7 installationmedia.Thereafter the Upgrade option should be selected.



QUESTION 18You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows Vista. During the course of the day a network user named MiaHamm asked you which of the Microsoft tools can be used to determine if your installed applications haveknown problems with Microsoft Windows 7.

What should you do?


A. You should consider instructing Mia Hamm that the USMT Microsoft tool can be used.B. You should consider instructing Mia Hamm that the Windows PE Microsoft tool can be used.C. You should consider instructing Mia Hamm that the Windows 7 Upgrade Advisor Microsoft tool can be

used.D. You should consider instructing Mia Hamm that the Sysprep Microsoft tool can be used.


Explanation/Reference:Explanation:Part 3: Migrate user profiles (5 Questions)


You are responsible for managing a workstation named CERTKILLER-WS624. CERTKILLER- WS624 isconfigured to run Windows Vista and contains an accounting application named accapp.exe. CertKiller.compurchases a new Windows 7 workstation that will replace CERTKILLER-624. You need to export the user stateas well as the settings of the accapp.exe application so that it can be migrated to the Windows 7 workstation.

What should you do?

A. You should consider modifying the migapp.xml file on CERTKILLER-WS624 and then run Scanstate.exewith the /i parameter.

B. You should consider modifying the miguser.xml file on CERTKILLER-WS624 and then runningLoadstate.exe with the /ui parameter.

C. You should consider running Scanstate.exe with the /genconfig parameter on CERTKILLER-ActualTests.comWS624.

D. You should consider running Loadstate.exe with the /config parameter on CERTKILLER- WS624.


Explanation/Reference:Explanation:In order to migrate a user from Vista to Windows 7run the User State Migration toolkit (USMT). ScanStatecollects the files and settings from the source computer. Run LoadState to restore the user state onto thedestination computer.Incorrect Answers:B: are incorrect because you would not export (save) the system or application settings with LOADSTATE. Youwould use SCANSTATE.C: Is incorrect because using the parameter /gencofig with SCANSTATE allows you to modify the


configuration file, not collect (save) user settings.Reference: http://technet.microsoft.com/en- us/library/cc721992(D: are incorrect because you would not export (save) the system or application settings with LOADSTATE. Youwould use SCANSTATE.

QUESTION 20You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network "Pass Any Exam. Any Time." -www.actualtests.com 18Microsoft 70-680: Practice Exam

contains 300 Windows XP Professional workstations and 200 Windows Vista Ultimate workstations.

You have been instructed to migrate all Windows XP Professional workstations to Windows 7 Ultimate. You

need to ensure that user files and setting are retained. However, several CertKiller.com users have usedEncrypting File System (EFS) to encrypt their user files. You thus need to migrate the Encrypting File System(EFS) encrypted files and certificates. In addition you need to ensure that you are able to encrypt the migrationstore during the migration.

What should you do?

A. On Windows XP make use of the User State Migration Tool (USMT) 3.0.B. On Windows XP make use of the User State Migration Tool (USMT) 2.6.C. On Windows 7 make use of the User State Migration Tool (USMT) 4.0.D. On Windows 7 make use of the User State Migration Tool (USMT) 3.0.


Explanation/Reference:Explanation:: USMT 3.0 or higher should be used on Windows XP to migrate EFS files and certificates and also encrypt themigration store. With USMT 3.0 you can specify the / efs :copyraw switch to automatically migrate the EFS filesand certificates to the destination computer that is running Windows Vista. To encrypt the store, you should usethe /encrypt switch.

QUESTION 21You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You have been instructed to perform a clean installation ofMicrosoft Windows 7 on the CertKiller.com client computers that are ActualTests.comcurrently running Microsoft Windows Vista.

You need to be able to migrate user data and settings to Windows 7. The computers running Windows Vistacurrently have a single partition of 80 GB with 60 GB of free disk space. You need to use the User StateMigration Tool (USMT) to migrate user state data while keeping network traffic to a minimum.

What should you do?

A. You should create a network share and store the user data in the shared folder.B. You should format the hard disks on the Windows Vista computers and create a primary and a secondary

partition.C. You should use third-party tools to resize the 80 GB partition and create a seconds partition to store the

user data."Pass Any Exam. Any Time." - www.actualtests.com 19Microsoft 70-680: Practice Exam

D. You should use the Windows Easy Transfer tool to store the user data on the system partition.


Explanation/Reference:Explanation:: Resizing the 80 GB partition with a third-party tool and creating a second partition to store the user state datawill keep the network traffic to a minimum. If you want to store user state data on a network share and thecomputer does not have a secondary partition, you should resize the partition.

QUESTION 22You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. During the course of the day a network user named Dean Austin

asked you which of the Microsoft operating systems supports offline migration using USMT.

What should you do? (Choose all that apply)

A. You should consider instructing Dean Austin that Microsoft Windows Vista supports offline migration usingUSMT.

B. You should consider instructing Dean Austin that Microsoft Windows XP Professional supports offlinemigration using USMT.

C. You should consider instructing Dean Austin that Microsoft Windows 7 supports offline migration usingUSMT.

D. You should consider instructing Dean Austin that Microsoft Windows 2000 Professional supports offlinemigration using USMT.ActualTests.com

Correct Answer: ABCSection: (none)Explanation



You are busy with a deployment of an image of a computer. You have created an answer file namedanswer.xml. You want to ensure that the installation applies the answer file after the deployment of the image.

What should you do?


A. You should consider running the Imagex.exe /append answer.xml /check before you capture the image.B. You should consider running the Sysprep.exe /generalize /oobe /unattend:answer.xml before you capture

the image.C. You should consider running the Imagex.exe /mount answer.xml /verify before you capture the image.D. You should consider running the Sysprep.exe /reboot /audit /unattend:answer.xml before you capture the

image.


Explanation/Reference:Explanation:The System Preparation ( Sysprep ) tool prepares an installation of Windows 7 for duplication, auditing, andcustomer delivery. You can use an answer file with Sysprep to configure unattended Setup settings.The /generalize command removes any machine specific attributes such as the Seurity ID (SID).

The / oobe command tells the image to start with the normal "Out-Of-The-Box" experience. Just as if youbought a retail new copy.

The / unattend : command tells the image to use the answer file Incorrect Answers:D: The reboot and audit commands are not valid together. Reboot restarts the computer. Use this option toaudit the computer and to verify that the first-run experience operates correctly. Audit restarts the computer intoaudit mode. Audit mode enables you to add additional drivers or applications to Windows. You can also test aninstallation of Windows before it is sent to an end user. If an unattended Windows setup file is specified, the

audit mode of WindowsSetup runs the auditSystem and auditUser configuration passes.

ActualTests.com

QUESTION 24You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You have been instructed to deploy Microsoft Windows 7 on allof the CertKiller.com client computers.

You have installed Windows Automated Installation Kit (Windows AIK) on a reference computer. You thencreated an answer file for a Windows 7 unattended installation. You now need to validate the answer file beforedeploying Windows 7 to the CertKiller.com client computers.

What should you do?

A. You should consider using the Setup Manager."Pass Any Exam. Any Time." - www.actualtests.com 22Microsoft 70-680: Practice Exam

B. You should consider using the Sysprep.exe utility.C. You should consider using the Office Customization Tool (OCT).D. You should consider using the Windows System Image Manager (Windows SIM) tool.


Explanation/Reference:Explanation:: The Windows SIM tool is used to create an answer file, as well as to validate the answer file to ensure that thefile is working.

QUESTION 25You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com.

The CertKiller.com management has instructed you to install Microsoft Windows 7 on all the client computers atCertKiller.com. You have installed Windows Deployment Service (WDS) on a server named CERTKILLER-SR05. You want to use a client computer named CERTKILLER-WS680 as a reference computer from whichyou want to create the image for the deployment. You now need to remove hardware-specific information fromthe Windows installation on CERTKILLER-WS680.

What should you do?


A. You should consider running the Sysprep.exe utility with the /oobe and /generalize switches onCERTKILLER-WS680.

B. You should consider running the Pkgmgr.exe utility with the /oobe and /generalize switches onCERTKILLER-WS680.

C. You should consider running the Setupmgr utility with the /oobe and /generalize switches on CERTKILLER-WS680.

D. You should consider running the ImageX command-line utility with the /oobe and /generalize switches onCERTKILLER-WS680.


Explanation/Reference:Explanation:Part 2: Prepare a system image for deployment (4 Questions)

QUESTION 26You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains 5 Windows Server 2008servers, 200 Windows Vista Business client computers and 300 Windows 7 Professional client computers.

You have been instructed to deploy Microsoft Windows 7 on the 200 Windows Vista Business client computers.There is an existing offline Windows 7 image on a client computer named CERTKILLER-WS680. However, youneed to add updated device drivers to this image.

What should you do?

A. You should consider using the ImageX command line utility.B. You should consider using the Pkgmgr.exe utility.

ActualTests.comC. You should consider using the Windows System Image Manager (Windows SIM).D. You should consider using the Deployment Image Servicing and Management (DISM) tool.


Explanation/Reference:Explanation:: The Deployment Image Servicing and Management (DISM) tool replaces the Pkgmgr.exe utility and is used toupdate images by adding or removing device drivers and language packs, enabling or disabling Windowsfeatures, and adding and configuring Windows updates.


You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com has its headquarters in London and a regionaloffice in New York. All client computers on the CertKiller.com network run Windows 7 Ultimate. You areresponsible for managing CertKiller.com's operating system deployment images.

CertKiller.com is in the process of opening a European regional office in Rome. You are required to ensure thata Windows 7 image with support for Italian is available for deployment in the Rome office.

What should you do?

A. You should consider using the ImageX command-line tool to mount the Windows 7 image and make theappropriate changes using an answer file.

B. You should consider using the ImageX command-line tool to mount the Windows 7 image and use a scriptto commit changes to the image.

C. You should consider using the International Settings and Configuration (Intlcfg.exe) tool to make theappropriate changes to the Windows 7 image.

D. You should consider using the Windows System Image Manager(Windows SIM) to create an answer fileand then use the Deployment Image Servicing and Management (DISM) tool to apply it to the Windows 7image.

Correct Answer: DSection: (none)

Explanation

Explanation/Reference:Explanation:: The Deployment Image Servicing and Management (DISM) tool allows you to add or remove packages to orfrom an offline image or an image that is currently running on a computer. You can also add or removeWindows features, apply unattended installation answer file settings, and perform the offline installation oflanguage packs and out-of-box driver packages specified in an answer file.ActualTests.com

QUESTION 28You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com has its headquarters in London and a regionaloffice in New York. All client computers on the CertKiller.com network run Windows 7 Ultimate. You areresponsible for managing CertKiller.com's operating system deployment images.

CertKiller.com is in the process of opening a European regional office in Rome. You are required to ensure thatsupport for Italian is available for the Windows 7 deployment in the Rome office. However, you need to installthe Italian language pack without editing the Windows 7 image.


What should you do?

A. You should consider installing the Italian language pack by using the Language Pack Setup Tool.B. You should consider copying the Windows distribution folder to the Italian language pack.C. You should consider installing the Italian language pack by using the Package Manager utility.D. You should consider installing the Italian language pack by using the Intlcfg.exe tool.



QUESTION 29You are employed as the network Administrator at CertKiller.com. The CertKiller.com network contains 150client computers currently make use of Microsoft Windows XP Professional.

CertKiller.com has recently decided to deploy Windows 7 to 80 client computers on the CertKiller.com network.You thus decide to install Windows 7 on a computer named CERTKILLER-WS06 and prepare it to be imaged.You thus need to determine what you should be doing prior to creating the image of CERTKILLER-WS06.

What should you do?

A. You should consider starting CERTKILLER-WS06 from the Windows Preinstallation Environment (WindowsPE).Thereafter the Wpeutil command should be run.

B. You should consider running the Dism command at the command prompt.C. You should consider running the Sysprep command at the command prompt.D. You should consider starting CERTKILLER-WS06 from the Windows Preinstallation ActualTests.com

Environment (Windows PE).Thereafter the Imagex command should be run.

Correct Answer: CSection: (none)

Explanation


QUESTION 30You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory forest containing a single domain named CertKiller.com. The servers on the network run MicrosoftWindows Server 2008 and the client computers run Microsoft Windows 7. The CertKiller.com network currentlyhas 25 desktop computers and 25 portable computer configured with 32-bit hardware.


During the course of the day you planned the deployment of Windows 7 along with several corporateapplications to client computers using a custom image. CertKiller.com wants you to prepare for the deploymentwhilst ensuring the least amount of administrative effort is used.

What should you do?

A. You should consider having the Microsoft Assessment and Planning (MAP) toolkit installed and run on aserver.

B. You should consider having the Windows Automated Installation Kit (AIK) installed and run the WindowsSystem Image Manager (Windows SIM) on a server.

C. You should consider having Microsoft Windows 7 and the corporate applications installed on one computer.D. You should consider having Microsoft Windows 7 and the corporate applications installed on one portable

computer and one desktop computer.


Explanation/Reference:Explanation:Part 3: Deploy a system image (4 Questions)

QUESTION 31You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You have been instructed to deploy Microsoft Windows 7 on allthe CertKiller.com client computers.

You use a client computer named CERTKILLER-WS680 as a reference computer to create custom image andan answer file that will be used to automate the deployment of Windows 7 on the client computers. You want tocomplete the task with the least amount of administrative effort.

What should you do?

A. You should consider installing Systems Management Server (SMS) operating system deployment (OSD)feature pack on CERTKILLER-WS680.

B. You should consider installing the Windows Automated Installation Kit (Windows AIK) on CERTKILLER-WS680.

C. You should consider installing Windows System Image Manager (Windows SIM) on CERTKILLER-WS680.D. You should consider installing the ImageX command-line utility on CERTKILLER-WS680.


Explanation/Reference:ActualTests.comExplanation:: WAIK is a set of tools that will aid you in deploying Windows 7 on target computers. You can create an answerfile and capture an image of a reference computer by making use of Windows AIK.

Incorrect answers :A : Installing SMS OSD feature pack on CERTKILLER-WS680 will help to prepare the reference computer tocapture an image to be deployed on all computers, but this approach will require more administrative time andeffort than making use of Windows AIK.C : Windows SIM is used to create answer file to automate Windows 7 deployment and is a part of WindowsAIK. Windows SIM does not create a custom image.D : The ImageX command-line utility is used to capture volume images to the Windows Imaging Format (WIM)file and is a part of Windows AIK. ImageX does not create an answer file.


QUESTION 32You work as the Desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You have been instructed to deploy Microsoft Windows 7 onCertKiller.com client computers that do not support PXE.

You install Windows Deployment Service (WDS) on a server named CERTKILLER-SR05 and create a discoverimage for the deployment. You now need to identify the best method for creating bootable media that will beused to deploy Windows 7 on the non-PXE supporting client computers.

What should you do?

A. You should consider installing Windows System Image Manager (Windows SIM) on CERTKILLER-SR05.B. You should consider installing the Windows Automated Installation Kit (Windows AIK) on CERTKILLER-

SR05.C. You should consider installing the Business Desktop Deployment (BDD) workbench on CERTKILLER-

SR05.D. You should consider installing System Management Server (SMS) on CERTKILLER-SR05 and create an

Image Capture CD using the SMS console.


Explanation/Reference:Explanation:: Bootable media that will be used to deploy Windows 7 to client computers must be created after a discoverimage is created. WAIK will provide the tools that are required to create the bootable media.ActualTests.com

QUESTION 33You work as a Desktop support technician at CertKiller.com. You have been assigned the task of installingWindows 7 on 10 network computers using custom WIM image.

You have Windows Automated Installation Kit (Windows AIK) installed on one of the computers. You now wantto create a WinPE CD to capture or apply the custom WIM image of Windows 7 from the master computer.

What should you do? (Each correct answer presents part of the solution. Choose three.)


A. You should copy the WinPE.wim and boot files to WinPE_x86 and Burn this data on a CD.B. You should run Copype.cmd to install Windows PE to a directory and then copy the imagex.exe file to ISO

folder under WinPE_x86 directoryC. You should create wimscript.ini configuration file in notepad. Save the file in the same directory as

imagex.exe.D. You should copy the Oscdimg.exe file and create a configuration file named wimscript.ini. Save the file in

the same directory as Oscdimg.exe.E. You should run Oscdimg.exe to create an ISO image of WinPE. Burn the image on a CD.

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:Explanation:To create a WinPE CD and to initiate Windows Vista installation using a custom WIM image of Windows Vista,you need to first run Copype.cmd to install Windows PE to a directory and then copy the imagex.exe file to ISOfolder under WinPE_x86 directory, then create wimscript.ini configuration file in notepad and save the file in thesame directory as imagex.exe, and then finally run Oscdimg.exe to create an ISO image of WinPE and thenburn the image on a CD.

Part 4: Configure a VHD (6 Questions)


The CertKiller.com network contains a client computer named CERTKILLER-WS679 with a Virtual Hard Disk(VHD). You have installed Windows 7 on the Virtual Hard Disk (VHD). You now want to boot CERTKILLER-WS679 from the Virtual Hard Disk (VHD).

ActualTests.comWhat should you do?

A. You should consider running the Select vdisk from the Diskpart.exe command.B. You should consider changing the active partition in Disk Management.C. You should consider running the Bcdedit.exe command and modifying the Windows Boot Manager settings.D. You should consider running the Bootcfg.exe command with the /default parameter.


Explanation/Reference:Explanation:If you are deploying the VHD to a computer with an existing Windows7 or Windows Server®2008R2installation, you can use the BCDedit tool to make the new VHD bootable and add it to the boot menu. UsingBCDedit , you obtain the GUID from the VHD boot disk and then


using BCDedit , set that GUID to be the default boot device.Incorrect Answers:A: Diskpart partitions the hard drive. It does not set the boot order.B: The Active Partition does not change.

QUESTION 35You work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. CertKiller.com has acquired a new computer named CERTKILLER-WS25 that has no operating system (OS) installed.

There is a virtual hard disk (VHD) in your department that contains an installation of Windows 7. You thusdecide to start CERTKILLER-WS25 from the Windows Preinstallation Environment (Windows PE). You thencreate a partition on CERTKILLER-WS25 and copy the VHD to it. Your subsequent step is to configureCERTKILLER-WS25 to start from the virtual hard disk.

What should you do?

A. Your best options would be to make use of Wpeutil.exe and Dism.exe.B. Your best options would be to make use of Scanstate.exe and Loadstate.exe.C. Your best options would be to make use of Imagex.exe and Bcdedit.exe.D. Your best options would be to make use of Diskpart.exe and Bcdboot.exe.



QUESTION 36You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft ActualTests.comWindows Server 2008 and the client computers run Microsoft Windows 7.

During the course of the day you receive instruction from CertKiller.com to create a 20-GB native VHD whichwill be named KingSystem located in a folder KingWindows which resides on an external hard disk assignedthe H: drive designation.

What should you do?

A. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem.vhd maximum=20command.

B. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem maximum=20command.

C. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem maximum=20000command."Pass Any Exam. Any Time." - www.actualtests.com 33Microsoft 70-680: Practice Exam

D. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem.vhd maximum=20000command.



QUESTION 37You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 and

the client computers run Microsoft Windows 7.

During the course of the day you receive instruction from CertKiller.com to configure fault tolerance for anoperating system on a computer running Microsoft Windows 7 Home Premium to boot in the event of a harddisk failure. CertKiller.com additionally informed you that the computer has two disks with unallocated space onthe second disk drive.

What should you do?

A. You should consider having a RAID-1 volume created.B. You should consider having a RAID-5 volume created.C. You should consider having a VHD created and install an image of your computer on the VHD.

You should then make use of BCDEdit to make the VHD bootable.256 created.D. You should consider having a RAID-0 volume created.




You are currently working on a workstation named CERTKILLER-WS680. You use the Windows PreinstallationEnvironment (Windows PE) to boot CERTKILLER-WS680. You now need to load a network adapter devicedriver on the Windows PE.

What should you do?

A. You should consider running Drvload.exe and then specify the device driver path.B. You should consider running the Winpeshl.exe and then specify a custom Winpeshl.ini file.C. You should consider using the InitializeNetwork command after you run Wpeutil.exe.D. You should consider running Peimg.exe and then specify the device driver path.


Explanation/Reference:Explanation:Drvload.exe is the tool used to load drivers in the PE environment. Manually load the network driver, and thenverify that it is the correct driver.Incorrect Answers:B: Winpeshl controls whether a custome shell (GUI) is loaded in WinPEC: WinPEutil /Initializenetwork Initializes network components and drivers, and sets the computerActualTests.comname to a randomly-chosen value. However, it does not load or configure drivers.D: PEimg.exe is a command-line tool for creating and modifying WindowsPE 2.0 images offline.

QUESTION 39CertKiller.com has employed you as a network Administrator. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network client computers currently makeuse of Microsoft Windows 7. You are assigned a client computer named CERTKILLER-WS25. To ensure yourproductivity you need to make sure that the physical memory as well as the speed is increased onCERTKILLER-WS25.


A. You should consider making use of ReadyBoost.B. You should consider making use of PhysiRAM.C. You should consider making use of DirectAccess.D. You should consider making use of Aero Glass.



QUESTION 40You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7."Pass Any Exam. Any Time." - www.actualtests.com 37Microsoft 70-680: Practice Exam

CertKiller.com has recently deployed a client computer that is used by multiple users who log on to thecomputer. The client computer currently has five removable devices attached. During the course of the day youreceive instruction from CertKiller.com to ensure that the network users are only able to access remove abledevices which were previously installed in the computer by modifying the Local Group Policy.

What should you do?

A. You should consider having the WPD Devices: Deny read access setting disabled.B. You should consider having the Allow administrators to override Device Installation Restriction policies

setting disabled.C. You should consider having the Prevent redirection of USB device settings enabled.D. You should consider having the Prevent installation of removable devices setting enabled.


Explanation/Reference:Explanation:Part 2: Configure application compatibility (9 Questions)


The CertKiller.com network contains a Windows 7 client computer named CERTKILLER-WS680.CERTKILLER-WS680 also runs a third party accounting application named accapp.exe. However, accapp.exeis started during the boot process. You have received instructions to ensure that accapp.exe is only startedmanually and not started during the boot process.ActualTests.comWhat should you do?

A. You should consider using the local Group Policy and set the application control policy.B. You should consider using the System Configuration tool and use the Diagnostic Startup.

C. You should consider using the local Group Policy and set the software restriction policy.D. You should consider using the System Configuration tool and set the Startup applications.


Explanation/Reference:Explanation:Using the System Configuration tool (MSConfig.exe), you can select diagnostic booting or configurate startingservices or applications.


Incorrect answers:A: Group policy and Application control will prevent applications from starting, manually or otherwise.B: Diagnostic startup will make all sorts of changes to the start up and should be used just for diagnostics.C: Group policy and Software restriction policies can restrict applications from starting, manually or otherwise.

QUESTION 42You work as a Desktop Technician at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network contains a workstation namedCERTKILLER-WS680.

You have upgraded CERTKILLER-WS680 from Windows XP Professional Service Pack 2 (SP2) to Windows 7Professional. However, when you attempt to run a custom application named CKapp.exe you receive an errormessage stating: "This application is only designed to run on Windows XP or later." You need to configure theapplication to run on Windows 7.ActualTests.comWhat should you do?

A. You should consider installing Windows XP Mode on CERTKILLER-WS680.B. You should consider having the CKapp.exe application configured to run with elevated privileges.C. You should consider connecting to Microsoft Updates and download any available updates.D. You should consider modifying the CKapp.exe application properties to run in VGA Mode.



QUESTION 43CertKiller.com has hired you as a network Administrator for their network. The CertKiller.com network contains50 client computers that are configured to run Microsoft Windows XP Professional. During the course of theday you receive an instruction from the CIO to determine which current applications installed on the clientcomputers is compatible with Windows 7. You need to accomplish this task with the least amount ofadministrative effort.

What should you do?ActualTests.com

A. You should consider installing Microsoft Deployment Toolkit (MDT).B. You should consider installing Microsoft Assessment and Planning (MAP) Toolkit.C. You should consider installing Windows Automated Installation Kit (AIK).D. You should consider installing Microsoft Application Compatibility Toolkit (ACT).



QUESTION 44You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7 or Microsoft Windows XP Professional.

During the course of the day a network user named Dean Austin asked you which of the Microsoft utilities canbe used when transferring user encryption certificates from a computer that is configured to run MicrosoftWindows XP Professional to a computer configured to run Microsoft Windows 7.

What should you do? (Choose two)

A. You should consider instructing Dean Austin that the Windows Easy Transfer utility can be used fortransferring the user encryption certificates.

B. You should consider instructing Dean Austin that the Robocopy.exe utility can be used for transferring theuser encryption certificates.ActualTests.com

C. You should consider instructing Dean Austin that the File Settings and Transfer Wizard utility can be usedfor transferring the user encryption certificates.

D. You should consider instructing Dean Austin that the USMT utility can be used for transferring the userencryption certificates.

Correct Answer: AD

Section: (none)Explanation


QUESTION 45You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. During the course of the day a network user named Rory Allenasked you what he should download from the Microsoft


Corporation Web site to obtain USMT 4.0.

What should you do?

A. You should consider instructing Rory Allen that WAIK should be downloaded from Microsoft Corporation toobtain USMT 4.0.

B. You should consider instructing Rory Allen that Microsoft Application Compatibility Toolkit should bedownloaded from Microsoft Corporation to obtain USMT 4.0.

C. You should consider instructing Rory Allen that Windows Anytime Upgrade should be downloaded fromMicrosoft Corporation to obtain USMT 4.0.

D. You should consider instructing Rory Allen that Windows Upgrade Advisor should be downloaded fromMicrosoft Corporation to obtain USMT 4.0.



QUESTION 46You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7.

During the course of the day you create an application shim of the accounting software for a third- partyapplication using Microsoft Application Compatibility Toolkit (ACT). CertKiller.com has recently requested thatyou make sure the application shim is applied the following time the application is run.

What should you do?

A. You should consider having the application executable file right-clicked and modify the ActualTests.comcompatibility settings.

B. You should consider having the application executable file right-clicked and modify the advanced securitysettings.

C. You should consider having the Sdbinst.exe command run.D. You should consider having the Msiexec.exe command run.


Explanation/Reference:Explanation:Part 3: Configure application restrictions (9 Questions)


You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com.

You are responsible for managing a desktop workstation named CERTKILLER-WS680. CERTKILLER-WS680is configured to run Windows 7. You receive an instruction to ensure that all device drivers installed onCERTKILLER-WS680 is digitally signed.

What should you do?

A. You should consider running Sigverif.exe at a command prompt on CERTKILLER-WS680.B. You should consider running Verify at a command prompt on CERTKILLER-WS680.C. You should consider selecting the Devices by connection view from the Device Manager on CERTKILLER-

WS680.D. You should consider clicking Scan to determine any hardware changes from the Device Manager on

CERTKILLER-WS680.



QUESTION 48You work as a desktop support technician at a small company named CertKiller.com. All CertKiller.com usersare divided into groups named CK_ADMIN, CK_SUPRT and CK_STAFF.

The CertKiller.com network contains a stand-alone Windows 7 computer named CERTKILLER- WS680.Several CertKiller.com users make use of CERTKILLER-WS680. You need to prevent the CertKiller.com usersof the CK_STAFF group from running Windows Media Player on CERTKILLER-WS680. However, all othermembers must still be able to run Windows Media Player. You want to accomplish this task by using the leastamount of administrative effort.


A. You should consider creating an executable rule from Application Control Policies on CERTKILLER-WS680.B. You should consider creating the default rules from Application Control Policies on CERTKILLER-WS680.C. You should consider creating a hash rule from Software Restriction Policies on CERTKILLER- WS680.D. You should consider creating a path rule from Software Restriction Policies on CERTKILLER- WS680.


Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 44Microsoft 70-680: Practice Exam

QUESTION 49You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on theCertKiller.com network run Windows7.

ActualTests.comCertKiller.com issues a new usage policy that states that no CertKiller.com user should be allowed to play videoclips using Windows Media Player. You need ensure that this policy is applied.

What should you do? (Each correct answer presents part of the solution. Choose TWO.)

A. You should create a software restriction policy.B. You should enable auditing on the use of wmplayer.exe for all users.C. You should create a logon script that uninstalls Windows Media Player.D. You should create a path rule to restrict the use of wmplayer.exe


Explanation/Reference:Explanation:


To prevent users from running Windows Media Player, you need to first create a software restriction policy andthen create a path rule to restrict the use of wmplayer.exe. Software Restriction Policies can be used to protectcomputers against unauthorized software.Incorrect Answers:B: Auditing will not allow you to stop the use of software.C: Uninstalling media player through logon script leaves the scope of reinstalling the software and using it.


A software restriction policy has been implemented for the Finance department and the default security level forthe policy has been set to Disallow. The Finance department now needs to run a custom application namedFinApp.exe.

You now need to configure the software restriction policy to allow CertKiller.com users in the Financedepartment to run FinApp.exe. However, they should not be allowed to run any other unauthorized applications.

What should you do?

A. You should set the default security level of the software restriction policy to Unrestricted.B. You should add FinApp.exe to the Designated File Types.C. You should create a new path rule for FinApp.exe.D. You should set the default security level of the software restriction policy to Basic User.

ActualTests.com



Explanation:To configure the software restriction policy to allow Finance department users to run FinApp.exe and makesure that they are not allowed to run any other unauthorized applications, you need to create a new path rule forFinApp.exe and then set the rule to Unrestricted.Incorrect Answers:A: Setting the default security level of the software restriction policy to Unrestricted will remove all therestrictions from the Finance department and they will be allowed to run any application.B: Adding FinApp.exe to the Designated File Types will not help because FinApp.exe is not a file type but a fileitself.D: Setting the default security level of the software restriction policy to Basic User will allow all basic users touse all the applications and the restrictions will be removed.


QUESTION 51CertKiller.com has employed you as a network Administrator. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All servers on the CertKiller.com network run Windows Server2008 and all client computers run Windows 7. CertKiller.com has three custom financial applications that aredigitally signed. For security purposes CertKiller wants you to devise a security policy that will only enablecompany approved digital signed applications to run.

What should you do?

A. Your best option would be to have a software restriction policy as well as a hash rule created.B. Your best option would be to have an AppLocker Windows Installer rule created.C. Your best option would be to have an AppLocker executable rule created.D. Your best option would be to have a software restriction policy as well as a certificate rule created.



QUESTION 52CertKiller.com has employed you as a network Administrator. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network client computers are configured torun Windows 7. You are assigned a computer named CERTKILLER- SR05. During the course of the day youreceive an instruction from the CIO to identify the applications that was installed on CERTKILLER-SR05 theprevious week. You need to gather this information as soon as possible.ActualTests.comWhat should you do? (Choose all that apply.)

A. You should be able to locate this information by checking the Windows System Change Log in the ControlPanel.

B. You should be able to locate this information by reviewing the informational events from the ReliabilityMonitor.

C. You should be able to locate this information by checking the Windows System Diagnostics Report underthe Performance Monitor MMC.

D. You should be able to locate this information by viewing all events in the Applications Log that is under theWindows Logs in the System and Security component section of the Control Panel.

Correct Answer: BDSection: (none)Explanation


QUESTION 53You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. During the course of the day you receive instruction fromCertKiller.com to deny the network users execute, write and read access to all types of external storage devicesfor security reasons.

What should you do?

A. You should consider making use of the Removable Disks: Deny Read Access computer policy setting.B. You should consider making use of the Removable Disks: Deny Write Access computer policy setting.C. You should consider making use of the All Removable Storage: Allow Direct Access In Remote Sessions

computer policy setting.D. You should consider making use of the All Removable Storage Classes: Deny All Access computer policy

setting.



QUESTION 54You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers run Microsoft Windows 7.

You are assigned a client computer named CERTKILLER-WS680. You want to modify the file extensions onCERTKILLER-WS680 that are linked to Internet Explorer.

What should you do?

A. You should consider opening Default Programs and selecting Set Associations from the Control Panel.B. You should consider right-clicking %programfiles%\Internet Explorer\iexplore.exe and selecting Properties

from Window Explorer.C. You should consider expanding Computer Configuration and selecting Software Settings from the local

Group Policy.D. You should consider selecting Tools and then Manage Add-ons from Internet Explorer.



QUESTION 55ActualTests.comYou work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains internal Web site that usesIntegrated Windows Authentication.

A CertKiller.com user named Amy Walsh has been assigned a workstation named CERTKILLER- WS680 that

is running Windows 7. Amy Walsh reports that she is prompted for authentication when she attempts to accessthe internal Web site. You verify that Amy Walsh's user account has permission to access the internal Website. You need to make sure that authentication occurs automatically when Amy Walsh attempts to connect theWeb site.

What should you do?

A. You should consider adding the Web site's URL to the Local zone on CERTKILLER-WS680."Pass Any Exam. Any Time." - www.actualtests.com 49Microsoft 70-680: Practice Exam

B. You should consider creating a difficult password for Amy Walsh's user account.C. You should consider changing the credentials for Amy Walsh in the Credential Manager.D. You should consider adding the Web site's URL to the Trusted sites zone on CERTKILLER- WS680.




A CertKiller.com user named Mia Hamm currently makes use of a computer named CERTKILLER-WS680which runs Microsoft Windows 7. You want to configure CERTKILLER- WS680 to prevent Microsoft InternetExplorer from saving any data when Mia Hamm browses the Internet.

What should you do?

A. You should consider disabling the InPrivate Blocking list on CERTKILLER-WS680.B. You should consider disabling the BranchCache service on CERTKILLER-WS680.C. You should consider opening an InPrivate Browsing session on CERTKILLER-WS680.D. You should consider disabling the security settings for the Internet zone on CERTKILLER- WS680.



QUESTION 57You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run Windows7 Professional.

A CertKiller.com user named Andy Reid currently makes use of a computer named CERTKILLER- WS680.You want to configure CERTKILLER-WS680 to make sure that the temporary Internet files are deletedimmediately whenever Andy Reid closes Internet Explorer.ActualTests.comWhat should you do?

A. You should consider modifying the properties of the Recycle Bin on CERTKILLER-WS680.B. You should consider modifying the advanced settings from the Internet Options on CERTKILLER-WS680C. You should consider modifying the security level for the Internet zone from the Internet Options on

CERTKILLER-WS680.D. You should consider modifying the permissions of the %systemroot%\temp\history folder on CERTKILLER-

WS680.



QUESTION 58ActualTests.comYou work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com has itsheadquarters in London and a branchoffice in Paris.

The relevant portion of the CertKiller.com network is shown in the following exhibit:


You have just deploy a Windows 7 workstation named CERTKILLER-WS680 at the Paris office. You now needto assign an IP address to the worksation.

What should you do?

A. You should consider assigning the IP address 192.168.5.193 to CERTKILLER-WS680.B. You should consider assigning the IP address 192.168.5.126 to CERTKILLER-WS680.C. You should consider assigning the IP address 192.168.5.40 to CERTKILLER-WS680.D. You should consider assigning the IP address 192.168.5.94 to CERTKILLER-WS680.


Explanation/Reference:Explanation:Correct Answer 192.168.5.40. Using an IP address like 192.168.5.52/27 is a shorthand way of indentifying thesubnet mask. The /27 means that the first 27 bits of the IP address is the net mask. In this case255.255.255.224. So the range of the available IP addresses for computers is limited to 192.168.5.33-62. Theonly IP address listed in that range is 198.158.5.40

The range starts at 33 because in the IP address given (192.168.5.40) the last octet number is 40. 40 includes

the number 32 which is 27th bit in the subnet mask. This means that the subnet ends at 32 and so workstationsmust begin at 33. Or in other words, the address of the the subnet is 192.168.5.32. This answer is the sameregardless of the first three octet values. Even if the IP address was 192.168.2.62, the results are the same.

ActualTests.com


ActualTests.com

QUESTION 59You work as the network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. All servers on the CertKiller.com network run Windows Server 2008and all client computers run Windows 7. All client computers are configured as Dynamic Host ConfigurationProtocol (DHCP) clients.


CertKiller.com users connect to a file server named CERTKILLER-SR01 that hosts several shared folders. Afellow network administrator relocates CERTKILLER-SR01 to another network segment. However, after theCERTKILLER-SR01 is relocated, numerous CertKiller.com users complain that they are unable to access theshared folders on TESTING-SR01. You need to make sure that CertKiller.com users can connect toCERTKILLER-SR01 and access the shared folders on CERTKILLER-SR01.

What should do?

A. You should instruct all CertKiller.com users to run ipconfig /displaydns from a command prompt window ontheir client computers.

B. You should instruct all CertKiller.com users to run netsh interface ip set dns from a command promptwindow on their client computers.

C. You should instruct all CertKiller.com users to run ipconfig /release and ipconfig /renew from a commandprompt window on their client computers.

D. You should instruct all CertKiller.com users to run ipconfig /flushdns and then ipconfig /registerdns from acommand prompt window on their client computers.


Explanation/Reference:Explanation:: The ipconfig / flushdns command is used to flush and reset the contents of the DNS client resolver cache. Theworkstations that communicated with CERTKILLER-SR01 prior to the move cached the server's IP address intheir DNS cache. It is therefore a possibility that those workstations are retrieving their IP address from thecache. It does not query the DNS server for the IP address. This type of situation will continue until the cachedrecords expire. The ipconfig / registerdns command is used for manual dynamic registration for the DNSnames and IP addresses that are configured at a workstation.

ActualTests.com


You are working on a client computer named CERTKILLER-WS680. You want to release the DHCP assignedIP configuration of CERTKILLER-WS680. However, when you run the ipconfig /release command you receive

the error message stating that elevated permissions are required.

What should you do?

A. You should consider right-clicking the command prompt and select Run as administrator and user theipconfig /release command."Pass Any Exam. Any Time." - www.actualtests.com 57Microsoft 70-680: Practice Exam

B. You should consider logging on as an administrator and open the command prompt to run the ipconfig /allcommand.

C. You should consider opening the Command Prompt and run the ipconfig /release /high command.D. You should consider having Parental Controls disabled and open the Command Prompt to run ipconfig /all

command.



QUESTION 61You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network currently consists of two office namedDetroit and Miami which are on an isolated private wired subnet. The servers on the network run MicrosoftWindows Server 2008 and the client computers run Microsoft Windows 7.

During the course of the day you configure Detroit with an IPv4 address 172.28.34.140 with a subnet mask of255.255.255.0. CertKiller.com additionally requested you configure the Miami office with an IPv4 address172.28.34.210 with a subnet mask 255.255.255.0. During your routine maintenance you ping Detroit entering172.28.34.140 and the command times out. You later try pinging Miami entering 172.28.34.210 and discoverthat you fail to locate the Miami computer IPv4 address. CertKiller.com wants you to determine what could becausing the problem.

What should you do?

A. You should inform CertKiller.com that the problem could be caused by not specifying a default gateway.B. You should inform CertKiller.com that the problem could be caused by not permitting ICMPv4

ActualTests.comtraffic through firewalls on both computers.

C. You should inform CertKiller.com that the problem could be caused by the DNS service not being availableon the subnet.

D. You should inform CertKiller.com that the problem could be caused by the computer being on differentsubnets.


Explanation/Reference:Explanation:Part 2: Configure IPv6 network settings (5 Questions)


You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a single

Active Directory domain named CertKiller.com. The CertKiller.com network is configured to use IPv6addressing.

You have installed Windows 7 on a client computer named CERTKILLER-WS680 and have used automaticIPv6 addressing on CERTKILLER-WS680. You want to verify the IPv6 address of CERTKILLER-WS680.

What should you do?

A. You should consider running the Net config command from the command prompt on CERTKILLER-WS680.B. You should consider selecting Details from the network connection status on CERTKILLER- WS680.C. You should consider selecting Internet Protocol Version 6 (TCP/IPv6) and then Properties from network

connection properties on CERTKILLER-WS680.D. You should consider running the Netstat command from the command prompt on CERTKILLER-WS680.




A CertKiller.com user named Amy Wilson has been assigned a client computer named CERTKILLER-WS680.CERTKILLER-WS680 is connected directly to the Internet. You have ActualTests.comreceived instruction to configure CERTKILLER-WS680 with an Internet Protocol version 6 (IPv6) addresssimilar to a public IPv4 address. You need to determine the unicast address that needs to be configured onCERTKILLER-WS680.

What should you do?

A. You should consider using a unique local address as the appropriate IPv6 address type.B. You should consider using a link-local address as the appropriate IPv6 address type.C. You should consider making use of a site-local address as the appropriate IPv6 address type.D. You should consider using a global unicast address as the appropriate IPv6 address type.



Explanation:: Global Unicast IPv6 addresses are globally routable and reachable on the IPv6 portion of the Internet. Globaladdresses are equivalent to public IPv4 addresses and are used on the IPv6 Internet.


You are working on a client computer named CERTKILLER-WS680. You have been instructed to configureCERTKILLER-WS620 with 2001::e45d:691a:f:4ac2.

What should you do?

A. You should manually assign 2001::e45d:691a:f:4ac2 as the MAC address.B. You should manually assign 2001::e45d:691a:f:4ac2 as a DNS suffix search item.C. You should manually assign 2001::e45d:691a:f:4ac2 as a WEP key for a wireless network.D. You should manually assign 2001::e45d:691a:f:4ac2 as the IPv6 address.


Explanation/Reference:Explanation:The format of the address 2001: :e45d:691a:f:4ac2 tells us that this is an IPv6 address and therefore Kara Langneeds to configure her network connection by entering 2001::e45d:691a:f:4ac2 in the IPv6 address properties.Incorrect Answers:A: This is not a MAC address. Furthermore, a MAC address is hard coded into the network cardActualTests.comand as such is not something you would manually configure.B: A DNS suffix search item would be a domain name such as CertKiller.com or Microsoft.com.C: A WEP key is similar to a password and as such is usually just a string of random letters and numbers.

QUESTION 65You are employed as the network Administrator at CertKiller.com. The CertKiller.com network is configured tomake use of IPv6. You are responsible for managing a computer named CERTKILLER-SR04. You receive arequest from the CIO to create a DNS record that will allow users to connect to CERTKILLER-SR04 usingdec.CertKiller.com. You thus need to identify the appropriate record you should request.


What should you do?

A. Your best option would be to request a NAPTR record.B. Your best option would be to request HINFO record.C. Your best option would be to request AAAA record.D. Your best option would be to request an A record.



QUESTION 66You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. CertKiller.com has recently deployed two client computers to thenetwork configured with the IPv6 addresses shown in the table below:

During the course of the day you receive instruction from CertKiller.com to test the IPv6 address connectionfrom CERTKILLER-WS01 to CERTKILLER-WS02.

What should you do?

A. You should consider having the ping -r fe80::34df:1a54%11 command run.B. You should consider having the ping -r fe80::34df:1a54%13 command run.C. You should consider having the ping -6 fe80::34df:1a54%11 command run.D. You should consider having the ping -6 fe80::34df:1a54%13 command run.


Explanation/Reference:Explanation:ActualTests.comPart 3: Configure networking settings (10 Questions)

QUESTION 67You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains several mobile computersthat connect to the network via a wireless access point (WAP).

You are working on a mobile computer named CERTKILLER-WS680 that is running Windows 7. The networkadministrator has disabled the Service Set Identifier (SSID) broadcasts on the wireless access point (WAP).However, when you attempt to connect CERTKILLER-WS680 to the network you discover that you cannotaccess the WAP. You need to enable CERTKILLER-WS680 to access the wireless access point (WAP).


What should you do?

A. You should consider changing the wireless network connection setting on CERTKILLER- WS680.B. You should consider changing the Windows credentials on CERTKILLER-WS680.C. You should consider enabling Network discovery on CERTKILLER-WS680.D. You should consider changing the generic credentials on CERTKILLER-WS680.




You have received instructions to install a new hardware router that provides wireless network connectivitybetween a mobile computer named CERTKILLER-WS680 and the Internet. You connect CERTKILLER-WS680to the router by using a wireless network adapter and verify that CERTKILLER-WS680 can connectsuccessfully to the Internet. However, CERTKILLER-WS680 is unable to discover other computers in the localwireless network. You need to ensure that CERTKILLER-WS680 can discover other computers on the localwireless network.

What should you do?

A. You should configure the wired and wireless network adapters as a network bridge.B. You should change the Network Category setting of the wireless connection to Public.C. You should turn off the Windows Firewall feature on CERTKILLER-WS680.

ActualTests.comD. You should configure the network category of your wireless network connection to Private.


Explanation/Reference:Explanation:If the network category of the wireless connection is set to public, the network discovery feature is disabled. Asthe wireless connection is 'inside' the network (behind the router), you can safely configure the wirelessconnection network category to private. This will enable the network discovery feature.Incorrect Answers:A: Configuring the wired and wireless network adapters as a network bridge would enable communicationsbetween the wired network and the wireless network through your computer. This is not what is required in thisquestion and would not enable the network discovery feature.B: The Network Category setting of the wireless connection should not be set to Public. The


Network Category setting of the wireless connection is likely already set to Public which is the cause of theproblem.C: It is not necessary to turn off the Windows Firewall feature. This would not enable the network discoveryfeature.

QUESTION 69You are employed as a network administrator at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All mobile computers on the CertKiller.com network runMicrosoft Windows 7. The CertKiller.com network has a wireless access point (WAP) that all mobile computersuse to access the network. Service Set Identifier (SSID) broadcasts on the wireless access point (WAP) havebeen disabled.

You add a new Windows 7 mobile computer named CERTKILLER-WS680 to the network. You need toconfigure CERTKILLER-WS680 to connect to the wireless network.

What should you do?

A. You should click the 'Set up a connection or network' link and select the 'Set up a wireless Ad hoc network'option.

B. You need to click the 'Connect to a network' link, then right-click the appropriate network and select the'Connect' option.

C. You should click the 'View computers and devices' link, then right-click the wireless access point (WAP) andselect the 'Enable' option.

D. You should click the 'Set up a connection or network' link and select the 'Manually connect to a wirelessnetwork' option.



ActualTests.comExplanation:A wireless access point can be configured to broadcast its SSID ( it's name) or not to broadcast it. If thewireless access point is configured to not broadcast, it won't show up in the list of available networks in yourwireless networks box. You can however still connect to the network if you know it's SSID. To do this, you needto click the Manually connect to a wireless network option in the Set up a connection or network window andenter the SSID (name) of the wireless network you wish you connect to.Incorrect Answers:A: If you have a wireless router installed, the Ad Hoc network option is the wrong option.B: The wireless router is configured to not broadcast its SSID. Therefore, it won't show up in the list of availablenetworks to connect to. You have to manually specify the SSID of the wireless network to connect to it.C: The problem isn't that the wireless router isn't enabled. Therefore, enabling it isn't the solution.


QUESTION 70You are employed as a network administrator at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run MicrosoftWindows 7.

You have just installed a wireless network adapter on a client computer named CERTKILLER- WS680.However, CERTKILLER-WS680 is unable to connect to the local wireless network. You need to ensure thatCERTKILLER-WS680 is able to connect to the local wireless network.

What should you do?

A. You should change the 'Network Category' setting of the wireless connection to 'Public'.B. You should configure the wireless network adapter to connect to the appropriate wireless network from the

'Connect to a network' list.C. You should rename the wireless network adapter to match the Service Set Identifier (SSID) of the wireless

network.D. You should enable the 'Internet Connection Sharing' feature on the wireless network adapter.


Explanation/Reference:Explanation:To connect to a wireless network, you need to configure a connection to the wireless network. You can do thisby configuring the wireless network adapter to connect to the appropriate wireless network from the Connect toa network list. The Connect to a network list will list the available networks you can connect to. Select thenetwork and click Connect.Incorrect Answers:A: The network category setting determines the security settings of your network connection.ActualTests.comSetting it to public disables network features such as network discovery thus making the connection moresecure. It is not the solution to this question.C: You don't need to rename the wireless network adapter to match the Service Set Identifier (SSID) of thewireless network. This is not how you connect to a wireless network.D: You don't need to enable the Internet Connection Sharing feature on the wireless network adapter. This isnot how you connect to a wireless network.

QUESTION 71You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run Windows7.


The CertKiller.com network contains a wireless access point (WAP) that is configured to use AdvancedEncryption Standard (AES) security. However, you do not have a pre-shared key configured on the wirelessaccess point. You have received instructions to connect a mobile computer named CERTKILLER-WS680 tothe wireless access point.

What should you do?

A. You should consider using the 802.1x for the wireless connection.B. You should consider using the WPA2-Enterprise for the wireless connection.C. You should consider using the WPA2-Personal for the wireless connection.D. You should consider using the WPA-Personal for the wireless connection.



QUESTION 72CertKiller.com has hired you as a network Administrator for their network. All servers on the CertKiller.comnetwork run Windows Server 2008 and all mobile computers run Windows 7. You are assigned a computernamed CERTKILLER-WS20. You create an Encrypting File System (EFS) recovery key and certificate shownin the exhibit below:

ActualTests.com

To ensure productivity you need to make sure that your user account is able to decrypt the EFS files onCERTKILLER-WS20.

What should you do?

A. This can be accomplished by modifying the Restore files and directories setting from the local computerpolicy.

B. This can be accomplished by adding a Windows credential from the Credential Manager."Pass Any Exam. Any Time." - www.actualtests.com 65Microsoft 70-680: Practice Exam

C. This can be accomplished by adding a certificate-based credential from the Credential Manager.D. This can be accomplished by adding a data recovery agent from the local computer policy.



QUESTION 73You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. CertKiller.com recently deployed a server named CERTKILLER-SR01 which runs a custom network application. The IP configuration of CERTKILLER-SR01 is shown in thetable below:

During the course of the day you receive instruction from CertKiller.com to ensure that the client computerresolves CERTKILLER-SR01.CertKiller.com to only the 192.168.45.23 IP address.

What should you do?

A. You should consider having the Ipconfig.exe /flushdns command run.B. You should consider having the Netsh interface ipv4 reset command run.C. You should consider having the Hosts file edited.D. You should consider having the Lmhosts file edited.



QUESTION 74You work as a network administrator at CertKiller.com. The CertKiller.com network consists of aActualTests.comsingle Active Directory domain named CertKiller.com. The servers on the network run Microsoft WindowsServer 2008 and the client computers run Microsoft Windows 7. CertKiller.com has recently deployed a clientcomputer named CERTKILLER-WS01 and shared a folder on the disk drive. During the course of the day youreceive instruction from CertKiller.com to configure CERTKILLER-WS01 to ensure the requirements below aremet:CERTKILLER-WS01 should be configured to allow computers in the local subnet to access the sharedfolder.CERTKILLER-WS01 should be configured to stop computers in remote subnets from accessing theshared folder.CERTKILLER-WS01 should be configured to allow all client computers to connect toCERTKILLER-WS01 using Remote Desktop.

What should you do?


A. You should consider having the network discovery disables on all computers located in remote subnets.B. You should consider having the properties of the File and Printer Sharing firewall exceptions modified.C. You should consider having the subnet mask modified.D. You should consider having the Public folder sharing settings modified.



QUESTION 75You are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle IPv4 subnet that contains 15 computers. The computers are all configured to run Windows 7.

You are in the process of adding a new computer named CERTKILLER-WS16 with an IP address of192.168.34.42 to the IPv4 subnet. After the installation you discover that you are unable to connect to the othercomputers on the network, however, the other computers are able to make a connection to each other. Toensure productivity you need to make sure that you are able to connect to the other computers on the network.

What should you do?

A. This can be accomplished by having a static TCP/IP address configured.B. This can be accomplished by running Netsh.exe interface ipv4 install.C. This can be accomplished by turning off the Windows Firewall.D. This can be accomplished by running Ipconfig.exe /renew.



QUESTION 76You are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. All client computers on the CertKiller.com network areconfigured to run Windows 7. All users currently make use of a router that the company is connected to. TheDefault Gateway is set to 192.168.67.1 with a subnet mask of 255.255.255.0. You need to determine thecorrect IP Address for the network.

What should you do?

A. You should consider identifying 169.172.1.254 as the IP Address."Pass Any Exam. Any Time." - www.actualtests.com 67Microsoft 70-680: Practice Exam

B. You should consider identifying 192.168.67.30 as the IP Address.C. You should consider identifying 169.254.2.10 as the IP Address.D. You should consider identifying 173.16.10.1 as the IP Address.



Explanation:Part 4: Configure Windows Firewall (6 Questions)

QUESTION 77You work as a desktop support technician at CertKiller.com. The CertKiller.com network contains several FileTransfer Protocol (FTP) servers. You are working on a Windows 7 client computer named CERTKILLER-WS680.

You have received instruction to ensure that CERTKILLER-WS680 can only connect to the File TransferProtocol (FTP) servers when it is connected to a private network.

What should you do?

A. You should consider changing the application control policies from the local Group Policy on CERTKILLER-WS680.

B. You should consider changing the Advanced Sharing settings from the Network and Sharing Center Policyon CERTKILLER-WS680.

C. You should consider changing the Allowed Programs and Features list from the Windows Firewall Policy onCERTKILLER-WS680.

D. You should consider creating a new rule from the Windows Firewall with Advanced Security Policy onCERTKILLER-WS680.ActualTests.com



QUESTION 78You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com has its headquarters in London and a branchoffice in Manchester. All the client computers on the CertKiller.com network run Windows 7. The networkadministrator at the London office has enabled BranchCache.

You work on a client computer named CERTKILLER-WS680. When you run the Netsh command onCERTKILLER-WS680 you received the output as shown in the following exhibit:


You need to make sure that the client computers at the Manchester office can access the cached content onCERTKILLER-WS680.

What should you do?

A. You should consider configuring the BranchCache service to start automatically.B. You should consider enabling Internet Information Services (IIS).C. You should consider changing the Windows Firewall with Advanced Security rules.D. You should consider configuring the computer as a hosted cache client.



QUESTION 79You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. All client computers on the CertKiller.com ActualTests.comnetwork run Microsoft Windows 7.

The CertKiller.com network contains a client computer named CERTKILLER-WS680. CERTKILLER-WS680 isconfigured to use both wired and wireless network connections. The networks are not connected to each other.All incoming connections on the wireless connection are disallowed in Microsoft Windows Firewall onCERTKILLER-WS680.

You create a shared folder name CKDocs on CERTKILLER-WS680. However, the CertKiller.com users on thewireless network cannot access the shared folder. You need to ensure that all CertKiller.com users are ableaccess to the shared folder from the wireless network while maintaining the security of the wired network

What should you do?


A. You should turn off the Spyware and other malware protection option.B. You should enable the File and Printer Sharing exception in the firewall settings of the wireless network

adapter.C. You should turn off the Windows Firewall feature.D. You should disable the Block all incoming connections option.


Explanation/Reference:Explanation:You need to enable connections to a shared folder. Therefore, we need to enable inbound connections on theports used for accessing shared folders. Windows Firewall makes this easy in that you can simply enable theFile and Printer Sharing exception in the firewall settings. This will allow inbound connections on the necessaryports.Incorrect Answers:A: Turning off the Spyware and other malware protection option is a security risk. This solution does not enableaccess to shared folders.C: It is not necessary to turn off the Windows Firewall feature. This would allow inbound access on all ports. Wejust need to allow inbound access on the ports required to access shared folders.D: This is similar to turning off the Windows Firewall feature. This would allow inbound access on all ports. Wejust need to allow inbound access on the ports required to access shared folders.


A new 32-bit third-party accounting application named accapp.exe has just been installed on a computernamed CERTKILLER-WS680. The 32-bit third-party accounting application uses port 80 ActualTests.comto negotiate a listening port. After establishing the listening port, the application uses dynamic ports above port6000. You need to configure Microsoft Windows Firewall to allow traffic for the accapp.exe application.

What should you do?

A. You should restore the Windows Firewall defaults on CERTKILLER-WS680.B. You should add a program exception for the accapp.exe application.C. You should add a port exception for port 80 on CERTKILLER-WS680.D. You should disable the Core Networking exception on CERTKILLER-WS680.



QUESTION 81You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. CertKiller.com wants prevent all inbound traffic to the Windows 7computers without the end user being notified.

What should you do?

A. You should enable the Windows Firewall and deselect all entries in the exception list.B. You should set the network location to Public from the Network and Sharing Center.C. You should set the network location to Private from the Network and Sharing Center.D. You should enable the Windows Firewall and select the 'Block all incoming connections' check box.


Explanation/Reference:Explanation:Block all incoming connections, including those in the list of allowed programs This setting blocks all unsolicitedattempts to connect to your computer. Use this setting when you need maximum protection for your computer,such as when you connect to a public network in a hotel or airport, or when a computer worm is spreading overthe Internet. With this setting, you are not notified when Windows Firewall blocks programs, and programs inthe list of allowed programs are ignored. When you block all incoming connections, you can still view mostwebpages , send and receive e-mail, and send and receive instant messages.

QUESTION 82You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft ActualTests.comWindows Server 2008 and the client computers run Microsoft Windows 7.

During the course of the day you created a HomeGroup on the computer of a network user named Mia Hamm.CertKiller.com has recently requested that you secure the Home group whilst ensuring the securityrequirements set below are met:You should have access to the HomeGroup allowed when connected to private networks.You should haveaccess to the HomeGroup blocked when connected to public networks.

What should you do?

A. You should consider having the HomeGroup exception in Windows Firewall configured to include Home orwork (private) networks whilst blocking Public networks.

B. You should consider having the File and Printer Sharing exception in Windows Firewall configured toinclude Home or work (private) networks whilst blocking Public networks."Pass Any Exam. Any Time." - www.actualtests.com 71Microsoft 70-680: Practice Exam

C. You should consider having the advanced sharing settings from Network and Sharing Center modified.D. You should consider having the advanced sharing settings from HomeGroup setting in Control Panel

modified.


Explanation/Reference:Explanation:Part 5: Configure remote management (4 Questions)

QUESTION 83You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains two client computersnamed CERTKILLER-WS680 and CERTKILLER-WS682. Both CERTKILLER-WS680 and CERTKILLER-WS682 run Microsoft Windows 7.

You want to ensure that you can use CERTKILLER-WS680 to remotely execute commands on CERTKILLER-WS682.

What should you do?

A. You should consider enabling Windows Remote Management (WinRM) through Windows Firewall onCERTKILLER-WS682.

B. You should consider enabling Windows Remote Management (WinRM) through Windows Firewall onCERTKILLER-WS680.

C. You should consider running the Winrm quickconfig command on CERTKILLER-WS682.D. You should consider running the Winrm quickconfig command on CERTKILLER-WS680.

ActualTests.com




You have been assigned a client computer named CERTKILLER-WS680. To manage the computers on thecorporate network effectively, you want to view the security events logged on all client computers on thenetwork. You decided to collect the copies of events from multiple remote computers and store them onCERTKILLER-WS680. You also want to ensure that the events are encrypted when they are forwarded toCERTKILLER-WS680.


What should you so? (Each correct answer presents part of the solution. Choose THREE.)

A. You should ensure that Windows Remote Management (WinRM) service and the Windows Event Collectorservice are running on computers participating in the forwarding and collecting process

B. You should ensure that a Windows Firewall exception for Remote Event Log Management is configured oneach source computer.

C. You should ensure that the computer account of CERTKILLER-WS680 is added to the local Administratorsgroup on each of the source computers.

D. You should ensure that all users have a user certificate and Certificate Propagation service startup type isset to automatic.

E. You should ensure that all computers have a computers certificate and port 443 is open on the Windowsfirewall.

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:To enable forwarding of events from the client computers and collecting them to your computer, you need toensure that Windows Remote Management ( WinRM ) service and the Windows Event Collector service arerunning on computers participating in the forwarding and collecting process and ensure that the computeraccount of the collector computer is added to the local Administrators group on each of the source computers.

To ensure that the events must be encrypted when they are forwarded, you need to use the HTTPS protocol byusing the HTTPS option in Advanced Subscription Settings and ensure that all computers have a computers

certificate and port 443 is open on the Windows firewall

QUESTION 85ActualTests.comYou work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7.

CertKiller.com has two client computers named CERTKILLER-WS01 and CERTKILLER-WS02 which haveWindows Remote Management (WinRM) enabled. During the course of the day you receive instruction fromCertKiller.com to have an additional disk volume created remotely on CERTKILLER-WS01 usingCERTKILLER-WS02.

What should you do?

A. You should consider having the Telnet Client installed.You should then run the Diskpart command from CERTKILLER-WS02."Pass Any Exam. Any Time." - www.actualtests.com 73Microsoft 70-680: Practice Exam

B. You should consider having the Telnet Client installed.You should then make use of Disk Management from CERTKILLER-WS02.

C. You should consider having the Winrs command run and then running the Diskpart command onCERTKILLER-WS02.

D. You should consider having the Winrs command run and then running the Diskmgmt.msc command onCERTKILLER-WS02.


Explanation/Reference:Explanation:Windows Remote Management (known as WinRM ) is a handy new remote management service for WindowsServer 2003 R2, Windows Vista, and Windows Server 2008. WinRM is the "server" component of this remotemanagement application and WinRS (Windows Remote Shell) is the "client" for WinRM , which runs on theremote computer attempting to remotely manage the WinRM server. However, I should note that BOTHcomputers must have WinRM installed and enabled on them for WinRS to work and retrieve information fromthe remote system.

QUESTION 86You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7.

A network user named Rory Allen recently complained about receiving error messages whilst using anapplication. CertKiller.com is aware you do not have remote access to Rory Allen's computer. CertKiller.comrecently requested that you instruct Rory Allen how to create screenshots of the actions performed on thecomputer whilst ensuring the mouse actions performed are tracked to.


A. You should consider instructing Rory Allen to select Display pointer trails from Mouse Properties.B. You should consider instructing Rory Allen to run the Snippingtool.exe command then you should click New

and select Windows Snip.C. You should consider instructing Rory Allen to press ALT and PrintScreen.D. You should consider instructing Rory Allen to run the Psr.exe command and click Start Record.


Explanation/Reference:Explanation:The Problem Steps Recorder in the Windows 7 operating system is a feature that enables users to record theirinteractions with an application and provide a detailed screen-by-screen view with


accompanying information. Learn how the recording can be used to quickly identify problems and help reducetime spent with the help desk.

QUESTION 87You are employed as the desktop support technician at CertKiller.com. The CertKiller.com network consists ofa single Active Directory domain named CertKiller.com. You are responsible for a workgroup nameCK_GROUP that contains seven workstations. All the workstations run Windows 7.

The CK_GROUP contains workstation named CERTKILLER-WS680 that host video and audio files. You wantto share these files.

What should you do? (Each correct answer presents part on the solution. Choose TWO.)

A. You should consider moving the files to the Media Library on CERTKILLER-WS680.B. You should consider enabling BitLocker To Go on CERTKILLER-WS680 and moving the files to a

removable drive.C. You should consider enabling all BranchCache rules in Windows Firewall on CERTKILLER- WS680.D. You should consider creating a HomeGroup on CERTKILLER-WS680.



QUESTION 88You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The network contains a file server ActualTests.comnamed CERTKILLER-SR03 that runs Windows Server 2008. CERTKILLER-SR03 contains a shared foldernamed CK_Data.

You have been assigned a client computer named CERTKILLER-WS680 that runs Windows 7. You receive aninstruction to ensure that CERTKILLER-WS680 is configured to encrypt any cached files from CK_Data. Youalso need to ensure that when CERTKILLER-SR03 is disconnected the files in CK_Data are still available.

What should you do? (Each correct answer presents part on the solution. Choose TWO.)

A. You should consider copying the files from CK_Data to the Documents library on CERTKILLER-WS680.B. You should consider encrypting the files in the CK_Data share on CERTKILLER-SR03.


C. You should consider enabling encryption of offline files on CERTKILLER-WS680.D. You should consider enabling BitLocker Drive Encryption on CERTKILLER-WS680.E. You should consider making CK_Data available offline on CERTKILLER-WS680.

F. You should consider enabling BitLocker Drive Encryption on CERTKILLER-SR03.

Correct Answer: CESection: (none)Explanation

Explanation/Reference:Explanation:The two requirements are "to ensure that CertKiller-ws680 is configured to encrypt any cached files fromCK_Data " and that the files are available offline. E . Making the CK_Data files available office on CertKiller-ws680 is required and C. Enabling encryption of the offline files. It is true that if the files on the server areencrypted, they will also be encrypted in the workstation offline cache. But therequirement is "to ensure thatCERTKILLER-WS680is configured to cache any files from CK_Data ." Encrypting on the server is also morework than configuring the workstation. Offline files can be set to be encrypted via GPO or manually on theworkstation. Incorrect answers. A:Copying files from CK_Data to the workstation does not ensure encryption or availability offline.B: Encrypting files on the server. It is true that if the files on the server are encrypted, they will also be encryptedin the workstation offline cache. But therequirement is "to ensure that CERTKILLER- WS680is configured tocache any files from CK_Data ."D: Use of Bitlocker on the workstation would encrypt the entire disk and not just the offline files.F: Use of Bitlocker on the server would encrypt the entire serverand protect the files on the server but would donothing for encryption of the workstation.

QUESTION 89You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains a client computer namedCERTKILLER-WS680 that is running Windows 7.

ActualTests.comYou attach a printer named PRINTER01 to CERTKILLER-WS680 and install the printer drivers. You thenremove the Everyone group from the access control list (ACL) for the PRINTER01 and share the printer. Youneed to ensure that member of a group named CK_STAFF can only make changes to the print jobs that theysubmit. Members of the CK_STAFF group must not be able to change the print jobs of other users.

What should you do?

A. You should consider assigning the Manage Documents permission to the CK_STAFF group in the printerproperties.

B. You should consider assigning the Take ownership of files or other objects user right to the CK_STAFFgroup."Pass Any Exam. Any Time." - www.actualtests.com 76Microsoft 70-680: Practice Exam

C. You should consider assigning the Increase scheduling priority user right to the CK_STAFF group.D. You should consider assigning the Print permission to the CK_STAFF group in the printer properties.




You install a new printer named PRINTER1on a client computer named CERTKILLER-WS680. You share

PRINTER1 with several users in the Sales department. However, when members of the Sales departmentattempt to print to PRINTER1, the output is unreadable. You need to ensure that members of the Salesdepartment can successfully print to PRINTER1.

What should you do?

A. You should configure CERTKILLER-WS680 to print directly to the print device.B. You should configure PRINTER1 to use the WinPrint print processor and to use RAW as the default data

type.C. You should configure PRINTER1 to hold mismatched documents and disable the advanced printing

features.D. You should run the 'AddPrinter Driver Wizard' to install the correct printer driver on CERTKILLER-WS680.


Explanation/Reference:ActualTests.comExplanation:Unreadable text usually indicates an incorrect printer driver. We need to install the correct driver. The users willneed to disconnect and reconnect to download the new driver.

QUESTION 91You work as a network administrator at CertKiller.com. CertKiller.com has its headquarters located in Miamiand branch office located in Toronto. The CertKiller.com network consists of a single Active Directory domainnamed CertKiller.com. The servers on the network run Microsoft Windows Server 2008 R2 and the clientcomputers run Microsoft Windows 7.

A network user named Dean Austin uses a portable computer named CERTKILLER-WS01 which


is joined to the domain in the Toronto office. CertKiller.com has recently deployed a file server namedCERTKILLER-SR01 in the Miami office with a shared folder named KingShares. During the course of the dayyou receive additional instruction from CertKiller.com to configure CERTKILLER-WS01 to meet therequirements set below:CERTKILLER_WS01 should be configured to minimize network traffic between the Miami and Toronto officeensuring that Dean Austin can only use CERTKILLER-WS01 to access resources while connected to thenetwork.

What should you do?

A. You should consider having DirectAccess configured on CERTKILLER-SR01.B. You should consider having KingShares configured to be available offline on CERTKILLER- SR01C. You should consider having offline files enabled on CERTKILLER-WS01.D. You should consider having transparent caching enabled on CERTKILLER-WS01.


Explanation/Reference:Explanation:Part 2: Configure file and folder access (7 Questions)

QUESTION 92

You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com currently makes use of a stand-alone computernamed CERTKILLER-WS680 that runs Microsoft Windows 7. CERTKILLER-WS680 contains a single partitionand is used by two CertKiller.com users named Rory Allen and Kara Lang.

ActualTests.comRory Allen makes use of Encrypting File System (EFS) to encrypt files. During the course of the day Rory Allengrants Kara Lang access to the encrypted files. However, Kara Lang is unable to access the encrypted files.You need to ensure that Kara Lang is able to access the encrypted files of Rory Allen.

What should you do?

A. You should consider having Rory Allen export his certificate to a certificate (.cer) file.B. You should consider having Rory Allen move the file to a shared folder on CERTKILLER- WS680.C. You should consider having Kara Lang log on to CERTKILLER-WS680 and take ownership of the file.D. You should consider having Kara Lang log on to CERTKILLER-WS680 and encrypt a file.



Explanation/Reference:Explanation:This is a standalone computer. When Kara logs on and encrypts a file, the system will automatically generatean encryption certificate for her. The owner (Rory) of the encrypted file will also need to add Lara's certificate tothe file.

To add the EFS certificate to the shared file

Right-click the file you want to share, and then click Properties.

Click the General tab, and then click Advanced.

In the Advanced Attributes dialog box, click Details.

In the dialog box that appears, click Add.

In the Select User dialog box, click the certificate, and then click OK.

You can also use the "chiper.exe" command from the command line. You would use the adduser commandalong with the cert command.

If Kara already has a certificate and you want to use that certificate, you have to perform two additional steps:

1. Export Kara's Certificate &

2. Import Kara's certificate to Rory's machine.Incorrect Answers:ActualTests.comA: Exporting Rory's certificate will not help Kara decrypt the file.B: Moving the files to a share does not help with decryption. You might need to move the file to a sharedlocation to allow Kara to access the file, but it is not required for decryption.C: Having Kara take ownership of the file is an NTFS permissions issue. This may be required but will not affectencryption.Reference: http://windows.microsoft.com/en-US/windows-vista/Share- encrypted-files

QUESTION 93You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a single

Active Directory domain named CertKiller.com. All client computers on theCertKiller.com network run Windows7.


A CertKiller.com user named Mia Hamm has been assigned a client computer named CERTKILLER-WS680.Mia Hamm needs to share an existing folder on CERTKILLER-WS680 with other members in her group.However, Mia Hamm receives and "Access is denied" error whenever she tries to change the permissions onthe folder. You need to ensure that Mia Hamm can change the permissions on the folder.

What should you do?

A. You should add Mia Hamm to the Network Configuration Operators group.B. You should add Mia Hamm to the Power Users group on CERTKILLER-WS680.C. You should grant the 'Allow-Modify' permission on the folder to Mia Hamm.D. You should grant the 'Allow-Full control' permission on the folder to Mia Hamm.


Explanation/Reference:Explanation:To share a folder on her computer, Anna only needs full control on the folder. Therefore, you need to GrantAllow-Full control permission to Anna in the properties of the folder.Incorrect Answers:A: Members of Network Configuration Operators group have a subset of the Administrator-level rights thatenables them to install and configure networking features but does not allow users to have control on folders.B: The Power Users group does not exist in Windows 7. Providing only Modify permissions will not allow Annato change permissions on the folders.C: The Allow-Modify permission allows a user to make changes to files and folders. It does not allow them tochange the permissions on a file or folder.

QUESTION 94ActualTests.comYou work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on theCertKiller.com network run Windows7. The user accounts in the CertKiller.com network is divided into four groups named ADMIN, SALES,MARKETING and OTHER.

A CertKiller.com user named Mia Hamm has been assigned a client computer named CERTKILLER-WS680.Mia Hamm is a member of the SALES group. Mia Hamm shares a folder on CERTKILLER-WS680 namedCertKillerFiles1. Mia Hamm wants members of the MARKETING group to be able to add files to theCertKillerFiles1 shared folder. Currently members of the SALES group have Allow - Read permission for theCertKillerFiles1 shared folder while members of the MARKETING group have Allow - Modify permissions.

You need to ensure that members of both the SALES group and the MARKETING group can add


files to the CertKillerFiles1 shared folder.

What should you do? (Each correct answer presents part of the solution. Choose TWO.)

A. You should grant the EVERYONE group 'Allow - Full Control' permission on the CertKillerFiles1 sharedfolder.

B. You should grant the MARKETING group 'Allow - Read' permission on the CertKillerFiles1 shared folder.C. You should grant the SALES group 'Allow - Change' permission on the CertKillerFiles1 shared folder.D. You should grant the MARKETING group 'Allow - Read' permission on the CertKillerFiles1 shared folder.E. You should grant the SALES group 'Allow - Modify' permission on the CertKillerFiles1 shared folder.F. You should grant the MARKETING group 'Allow - Write' permission on the CertKillerFiles1 shared folder.

Correct Answer: CESection: (none)Explanation

Explanation/Reference:Explanation:In order for a group to be able to create files in a shared folder, the group must have the NTFS permissions of"Allow - Modify" on the folder and the sharing permission of "Allow - Change" on the share. Since the SALESgroup has neither, these two permissions must be added.

The Marketing group would also need to have "Change" permissions on the share but this is not one of thepossible answers.Incorrect Answers:A: EVERYONE Full Control permissions would grant the Groups ADMIN and OTHERS permissions. Thequestion requires only SALES and Marketing to have access.B: Marketing Group "Allow Read". The Marketing group would need permissions greater than ActualTests.com"Read" to be able to add files. (With either the NTFS permissions on the folder or the shared access permissionof "Read")D: Marketing Group "Allow Read". The Marketing group would need permissions greater than "Read" to be ableto add files. (With either the NTFS permissions on the folder or the shared access permission of "Read")F: Marketing group "Allow - Write" permissions. This is only applicable to folders' NTFS permissions. TheMarketing group already has "Modify" Permissions which include "Write" permissions.See http://technet.microsoft.com/en-us/library/bb457104.aspx#EDAA


You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. A network user Rory Allen uses a shared computer containing afolder named KingShares. Rory Allen is a member of the group named KingGroup. Rory Allen's permission isshown in the exhibit below:

ActualTests.com

The Group permission of the KingGroup members are shown in the exhibit below:


CertKiller.com wants you to ensure that Rory Allen is able to create files in the KingShares folderActualTests.comwhist ensuring that all other members of KingGroup are stopped from creating files in the KingShares folder.

What should you do?

A. You should consider having the Read and Change share permission assigned to Rory Allen on theKingShares folder.

B. You should consider having the Read and Change share permission assigned to KingGroup on theKingShares folder.

C. You should consider having the Full control permission assigned to Rory Allen on the KingShares folder.D. You should consider having the Deny - Write permission removed for KingGroup on the KingShares folder.




QUESTION 96You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single Active

Directory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7.

During the course of the day you attempt adding files to the %programfiles%\KingApps and receive a prompt toelevate your privileges. CertKiller.com wants you to ensure that you are able to add files to %programfiles%\KingApps without receiving the prompts whilst ensuring the solution prevents harmful application makingunwanted changes to the system.

What should you do?

A. You should consider having your user account added to the local Power Users group.B. You should consider having the permission of the %programfiles%\KingApps folder modified.C. You should consider having the built-in administrator account enabled.D. You should consider having the User Account Control (UAC) settings modified.



QUESTION 97You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. A network user named Rory Allen a member of the groupnamed KingAccess currently uses a shared computer.ActualTests.comRory Allen recently informs you that the computer has a folder named RAllen. Rory Allen requested that youconfigure the permissions on the RAllen folder to meet the requirements below:The permission should be modified to allow Rory Allen to delete all files in the RAllen folder.The permissionshould have the members of the KingAccess group able to create files in the RAllen folder.

Rory Allen has additionally stated that you should configure the permissions to prevent the members of theKingAccess group from deleting the files they did not create in the folder RAllen whilst preventing all users frommodifying the permission on RAllen.

What should you do?


A. You should consider having Rory Allen assigned the Modify permission whilst having the KingAccess groupdenied Write permission assigned.

B. You should consider having Rory Allen assigned the Write permission whilst having the Modify permissiondenied to the KingAccess group.

C. You should consider having Rory Allen assigned the Modify permission whilst assigning the Writepermission to KingAccess group.

D. You should consider having Rory Allen assigned the Write permission whilst assigning the Modifypermission to the KingAccess group.



QUESTION 98You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. The CertKiller.com network users currently make use of astandalone computer for storing encrypted files. CertKiller.com recently requested that you ensure you are ableto read the content of the encrypted files of all users on the standalone computer.

What should you do?

A. You should consider having the Cipher.exe /r command run and have a data recovery agent added from thelocal security policy.

B. You should consider having the Cipher.exe /rekey command run and import a security template from thelocal security policy.

C. You should consider having the Certificate Enrolment wizard run before running the Certutil.exe "Cimportpfxcommand.

D. You should consider having the Certificate Enrolment wizard run before running the Certutil.exeActualTests.com"Cinstallcert command run.


Explanation/Reference:Explanation:Part 3: Configure user account (UAC) (5 Questions)



You currently make use of a workstation named CERTKILLER-WS680. When installing new applications onCERTKILLER-WS680 you are prompted for user account control permissions. You want to configureCERTKILLER-WS680 to allow you to interact with the Desktop when prompted for user account controlpermissions.

What should you do?

A. You should consider setting the User Account Control: Switch to secure desktop when prompting forcredentials to Disabled.

B. You should consider setting the User Account Control: Run all administrators in Admin Approval Mode toEnabled.

C. You should consider setting the User Account Control: Run all administrators in Admin Approval Mode toDisabled.

D. You should consider setting the User Account Control: Switch to secure desktop when prompting forcredentials to Enabled.



QUESTION 100You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleworkgroup named CERTKILLER. All client computers on CERTKILLER workgroup run Windows 7.

You need to allow CertKiller.com users to install software on their client computers without having access toany other administrative functions. You also need to ensure that CertKiller.com users are able to installsoftware in the most secure manner.

What should you do?ActualTests.com

A. You should make all CertKiller.com users members of the local administrators group.B. You should disable 'User Account Control' from the 'User Accounts Control Panel' tool.C. You should configure 'Parental Controls' to prevent CertKiller.com users from downloading unapproved

software.D. You should configure the user account control to not prompt during software installation from the Security

Options section of the Local Security Policy.


Explanation/Reference:Explanation:: You need to edit the Local Security Policy to not prompt during installs by disabling the Detect applicationinstallations and prompt for elevation setting. This will allow applications to be installed without prompting forthe administrative credentials.



CertKiller.com has a written security policy that states that only administrator approved applications should beinstalled on the CertKiller.com network. A CertKiller.com user named Amy Wilson has been assigned a clientcomputer named CERTKILLER-WS680. Amy Wilson reports that every time she attempts to makeconfiguration changes to CERTKILLER-WS680, she receives the prompt shown in the following exhibit:

You need to ensure that Amy Wilson can make configuration changes to CERTKILLER-WS680. You verify thatAmy Wilson is a member of the local administrators group. You now want to prevent this prompt fromappearing when Amy Wilson attempts to make configuration changes to ActualTests.comCERTKILLER-WS680.

What should you do?

A. You should add Amy Wilson to the local Power Users group.B. You should add Amy Wilson to the local Users group.C. You should change 'The behavior of the elevation prompt for administrators' from 'User Account Control

(UAC) Admin Approval Mode'.D. You should turn off the Windows Firewall.E. You should disable running all administrators in 'User Account Control (UAC) Admin Approval Mode'.



Explanation:: UAC prevents unauthorized configuration changes and silent installations. The message that is displayedconfirms a user's decision to make configuration changes. This helps prevent viruses from making changes toa user's computer in the security context of the user but without the user's permission. You should change thebehavior of the elevation prompt for administrators in UAC Admin Approval Mode. Change the policy settingfrom Prompt for consent to No prompt. With this setting, the UAC message will not be displayed whenever AmyWilson attempts to make configuration changes that require administrative privileges.

QUESTION 102CertKiller.com has hired you as a network Administrator for their network. A CertKiller.com user named RoryAllen is a senior manager in the Marketing department. You receive a request from Rory Allen to ensure thathis children are only able to login to Windows 7 at certain times.

What should you do?

A. Your best option would be to go to the Homegroup settings and select the Offline Time Settings.B. Your best option would be to go to Start then Control Panel.

Thereafter User Profiles should be selected and the Time Restriction Settings configured.C. Your best option would be to prohibit the children from using the workstation when you are at work.D. Your best option would be to go to the Start then Control Panel.

Then you should go to User Accounts and Family Safety and select Setup Parental Controls.Thereafter Time Restrictions can be set.



QUESTION 103You work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. All servers on the CertKiller.com network run Windows 7. Half theclient computers run Windows Vista and the rest Windows XP Professional. A CertKiller.com employee namedKara Lang works in the Research and Development department. She informs you that the security pop-up

notifications appear constantly on her monitor whilst she is working. You thus decide implement a solution thatwill control when the notifications pop-up.

What should you do?


A. You can accomplish this using the User Access Control Panel.B. You can accomplish this using the Security Control Manager.C. You can accomplish this using the Notification Control Settings Manager.D. You can accomplish this using the User Account Control.


Explanation/Reference:Explanation:Part 4: Configure authentication and authorization (4 Questions)

QUESTION 104You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains a Windows 7 computernamed CERTKILLER-WS680 that runs a finance application named finapp.exe. You use RunAs with the /savecred parameter to start finapp.exe. You now want to delete the stored passwords.

What should you do?

A. You should consider changing the Authorization Manager options from Authorization Manager.B. You should consider changing the Windows credentials from Credential Manager.C. You should consider running the RunAs and specify the /noprofile parameter.D. You should consider running the Del and specify the /p parameter.



QUESTION 105ActualTests.comYou are the newly appointed network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. The CertKiller.com network contains a VPN servernamed CERTKILLER-SR01 that is configured to run Windows Server 2008. You are responsible for acomputer named CERTKILLER-WS10 that is configured to run Windows 7. During the course of the day youreceive an instruction from the CIO to make use of a smart card in order to authenticate CERTKILLER-SR01.

What should you do?

A. Your best option would be to make use of PAP.B. Your best option would be to make use of PMS-CHAP v2.C. Your best option would be to make use of P EAP.


D. Your best option would be to make use of PCHAP.



QUESTION 106You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 R2and the client computers run Microsoft Windows 7.

CertKiller.com has recently deployed a server named CERTKILLER-SR01 configured as a DHCP server thathas Network Access Protection (NAP) enforcement point configured. During the course of the day you receiveinstruction from CertKiller.com to configure a network user named Rory Allen's client computer as a NAP client.

What should you do? (Choose two)

A. You should consider having the Network Access Protection Agent service Startup Type set to Automaticfrom the services snap-in.

B. You should consider having the user interface settings configured from the NAP Client Configurationconsole.

C. You should consider having the DHCP Quarantine Enforcement Client enabled from the NAP ClientConfiguration console.

D. You should consider having the Netlogon service Startup Type set to Automatic from the services snap-in.

Correct Answer: ACSection: (none)Explanation


QUESTION 107You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. CertKiller.com has recently installed and configured a file servernamed CERTKILLER-SR01 to the network.

A network user named Rory Allen makes use of a computer named CERTKILLER-WS01 and tried logging onto CERTKILLER-SR01 using an account named RAllen unsuccessfully. CertKiller.com wants you to ensure thatRory Allen authenticates using the account named KingAdmin when connecting to CERTKILLER-SR01.

What should you do?


A. You should consider having the Add a Windows credential from Credential Manager selected onCERTKILLER-WS01.

B. You should consider having the Access this computer from the network user right modified from LocalSecurity Policy on CERTKILLER-WS01.

C. You should consider having the Link online IDs from User Accounts selected on CERTKILLER- WS01.D. You should consider having the Add a card selected from Windows CardSpace selected on CERTKILLER-

WS01.


Explanation/Reference:Explanation:Part 5: Configure BranchCache (4 Questions)

QUESTION 108You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. CertKiller.com has its headquarters in London and a branchoffice in Paris. All servers on the CertKiller.com network run Windows Server 2008 R2 and all client computersrun Windows 7. The London office contains a file server named CERTKILLER-SR04 that hosts shared foldersthat are accessed from both offices. The Paris office contains a DNS server named CERTKILLER-SR12.

You want to reduce network traffic between the Paris office and the London office. You decide to enableBranchCache in Hosted Cache mode on CERTKILLER-SR12. You now need to enable BranchCache on theclient computers.

What should you do?

ActualTests.comExplanation:Step #1Click START and select Computer Management


ActualTests.comStep #2Click on 'Services and Applications' and select 'Services'.


Step #3Locate the ' BranchCache ' service, start the service and set it to start automatically.

ActualTests.com

A.B.C.D.

Correct Answer: Section: (none)Explanation


QUESTION 109ActualTests.comYou work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. CertKiller.com has its headquarters in London and branch office inAthens. All servers on the CertKiller.com network run Windows Server 2008 and all client computers runWindows 7.

The servers are located at the London office and the four client computers at the Athens office. The serverslocated at London office have BranchCache enabled. You receive numerous complaints from users at theAthens office stating that it takes a long time to open big files in the London office. You receive an instructionfrom the CIO to minimize the time it takes for users in the Athens office to open files in the London office. Youare also instructed to minimize the total bandwidth used between the London and Athens offices.

What should you do?


A. Your best option would be to configure the client computers to make use of the BranchCache Hosted Cachemode at the Athens office.

B. Your best option would be to configure the client computers to make use of the BranchCache DistributedCache mode at the Athens office.

C. Your best option would be to configure the servers to use Background Intelligent Transfer Service (BITS) atthe London office.

D. Your best option would be to configure the Quality of Service (QoS) Packet Scheduler on all servers at theLondon office.



QUESTION 110You work as a network administrator at CertKiller.com. CertKiller.com currently has its headquarters located inMiami and branch office located in Detroit. The CertKiller.com network consists of a single Active Directorydomain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 and the clientcomputers run Microsoft Windows 7.

CertKiller.com has the Detroit office configured to use BranchCache. During the course of the day a networkuser in the Detroit office using a computer named CERTKILLER-WS01 complains from experiencingperformance issues. CertKiller.com wants you to temporarily have all the computers prevented from retrievingcached content from CERTKILLER-WS01.

What should you do?

A. You should consider having the Configure BranchCache for network files Group Policy setting modified.B. You should consider having the Set percentage of disk space used for client computer cache Group Policy

setting modified.ActualTests.com

C. You should consider having the Netsh branchcache flush command run at the command prompt ofCERTKILLER-WS01.

D. You should consider having the Netsh branchcache dump command run at the command prompt ofCERTKILLER-WS01.



QUESTION 111You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You are responsible for two workstations named CERTKILLER-WS680 and CERTKILLER-WS682. Both CERTKILLER- WS680 and CERTKILLER-WS682 run Windows 7 andare members of the CertKiller.com domain."Pass Any Exam. Any Time." - www.actualtests.com 95Microsoft 70-680: Practice Exam

You are able to recover the Encryption File System (EFS) encrypted files for all domain users fromCERTKILLER-WS680. CERTKILLER-WS680 is scheduled for routine maintenance. While CERTKILLER-WS680 you need to be sure that you can use CERTKILLER-WS682 to recover the Encryption File System(EFS) encrypted files for all domain users.

What should you do?

A. You should consider backing up %systemroot%\DigitalLocker on CERTKILLER-WS680 and restoring it onCERTKILLER-WS682.

B. You should consider running Secedit.exe with the /export parameter on CERTKILLER-WS680.Then you should consider running Secedit.exe with the /import parameter on CERTKILLER- WS682.

C. You should consider running Cipher.exe with the /removeuser parameter on CERTKILLER- WS680. Thenyou should consider running Cipher.exe with the /adduser parameter on CERTKILLER-WS682.

D. You should consider exporting the data recovery agent certificate on CERTKILLER-WS680 and importing iton CERTKILLER-WS682.



QUESTION 112You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run Windows7.

You have received instructions to ensure that no CertKiller.com user can copy unencrypted files to removabledrives.ActualTests.comWhat should you do?

A. You should consider changing the BitLocker Drive Encryption settings from the local Group Policy.B. You should consider initializing the TPM from the Trusted Platform Module (TPM) snap-in.C. You should consider changing the Trusted Platform Module (TPM) settings in the local Group Policy.D. You should consider changing the BitLocker Drive Encryption settings from the Control Panel.




The Research and Development department is working on a confidential project. To protect their computersfrom data theft they encrypted the hard disk of their client computers with BitLocker. The USB drive is used tostore the BitLocker password. All the computers that were encrypted were using Trusted Platform Model (TPM)chip on their motherboards.

A member of the Research and Development department named Amy Wilson has been assigned a clientcomputer named CERTKILLER-WS680. Amy Wilson reports that she was not able to start CERTKILLER-WS680 because the TPM chip on CERTKILLER-WS680 was faulty. You need to recover the encrypted datafrom CERTKILLER-WS680.

What should you do?

A. You should replace the motherboard on CERTKILLER-WS680 with the same brand of motherboard havingthe same brand of TPM chip.

B. You should update the BIOS on CERTKILLER-WS680.C. You should enter the BitLocker Drive Encryption Recovery console on CERTKILLER-WS680 by using the

password stored on the USB drive and recover the data.D. You should run WinRE on CERTKILLER-WS680 and recover the data.


Explanation/Reference:Explanation:When the BitLocker is used in TPM only mode, it uses TPM hardware to validate the integrity of the computerand the Operating System. If the TPM is missing or changed, then to recover data, ActualTests.comyou need to enter the BitLocker Drive Encryption Recovery console on the computer by using the 40 digitrecovery key or password stored on the USB drive to recover the data.

Part 2: Configure Direct Access (2 Questions)

QUESTION 114You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. There are both desktop and laptop workstations in operation atCertKiller.com.

You are assigned a workstation named CERTKILLER-WS680 that runs Windows 7. You run Ipconfig onCERTKILLER-WS680 and receive the output as shown in the following exhibit:

ActualTests.com

You want to establish a DirectAccess connection to the network.

What should you do?

A. You should first consider configuring a static IPv4 address on CERTKILLER-WS680.B. You should first consider enabling IPv6 on CERTKILLER-WS680.C. You should first consider adding the DNS server address on CERTKILLER-WS680.D. You should first consider creating a new VPN connection on CERTKILLER-WS680.


Correct Answer: BSection: (none)

Explanation

Explanation/Reference:Explanation:Part 3: Configure mobility options (3 Questions)

QUESTION 115You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You are assigned a mobile computer named CERTKILLER-WS680 that runs Windows 7.

You are currently using Windows Internet Explorer 8 to browse a Web site that displays Really SimpleSyndication (RSS) feeds. You want to be able to view the headlines of the site when CERTKILLER-WS680 isoffline.

What should you do?

A. You should add the home page of the site to the favorites list from Internet Explorer 8.B. You should open the Offline Files from the Control Panel and select the 'Enable Offline Files'.C. You should synchronize the information from the Sync Center prior to disconnecting from the Internet.D. You should add the RSS page of the site to the feeds list from Internet Explorer 8.



QUESTION 116You work as a desktop support technician at CertKiller.com. The CertKiller.com network consistsActualTests.comof a single Active Directory domain named CertKiller.com. All client computers on theCertKiller.com networkrun Windows 7. The CertKiller.com network contains a file server named CERTKILLER-SR24 that hosts ashared folder named CKDocs.

A CertKiller.com user Amy Walsh has been assigned a mobile computer named CERTKILLER- WS680. AmyWalsh uses CERTKILLER-WS680 to work on a file named MarketingPlan.doc, which is located in a foldernamed CKDocs folder on CERTKILLER-SR04.

Amy Walsh needs to make the MarketingPlan.doc file available on CERTKILLER-WS680 so that she cancontinue working on the document when she is out of the office. You verify that Amy Walsh has permission tomake the file available offline. However, when Amy Walsh right-clicks the file, the menu option labeled Makeavailable offline is not visible. You need to ensure that Anne can make the file available offline.


What should you do?

A. You should instruct Amy Walsh to map a network drive to the \\CertKiller-sr24\CKdocs folder.B. You should instruct Amy Walsh to move the MarketingPlan.doc file from the \\CertKiller- sr24\CKdocs folder

to a shared folder on CERTKILLER-WS680.C. You should ask a network administrator to modify the permissions on the MarketingPlan.doc file to grant

Amy Walsh Allow-Read & Execute permission.D. You should ask a network administrator to open the properties of the CKDocs shared folder and ensure that

the Allow caching of files in this shared folder check box is selected.


Explanation/Reference:Explanation:Enabling offline files is a two step process. First, it must be enabled on the shared files by allowing the cachingof the files. Only when this is done will Anne be able to make the files available to her offline.

QUESTION 117You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on theCertKiller.com network run Windows7. All CertKiller.com users store their data on a file server named CERTKILLER-SR04. No company or userdata is stored locally on client computers.

CertKiller.com users from the Sales department have been issued with portable computers. When these userstravel, they must be able to use company data files even when they are not connected to the network. Youenable caching of offline files on all shared folders on CERTKILLER-SR04. You also configure offline files on allportable computers in the Sales department. Before they leave the office users in the Sales department usersselect several folders from CERTKILLER- ActualTests.comSR04 to be made available offline.

However, when the users return to the office they report that the offline files are no available to them when theywere out of the office. You need to ensure that the offline files are available to the CertKiller.com users in theSales department even when they are not connected to the network.

What should you do?

A. You should grant the 'Allow-Full Control' permission on the shared folders on CERTKILLER- SR04 to theusers in the Sales department.

B. You should change the caching options for the shared folders on CERTKILLER-SR04 to allow automaticcaching of documents.

C. You should add CERTKILLER-SR04 to the Exception list on the offline files configuration of each portablecomputer in the Sales department."Pass Any Exam. Any Time." - www.actualtests.com 100Microsoft 70-680: Practice Exam

D. You should select the 'Notify me and begin working offline' check box from the Advanced properties forOffline Files on each portable computer in the Sales department.


Explanation/Reference:Explanation:The portable clients must be configured to begin to work offline when they are disconnected from the network.To configure this we must open Control Panel on the client computers and then o pen Folder Options. On theOffline Files tab, click Advanced and under When a network connection is lost, select Notify me and beginworking offline. This is the preferred option for portable notebook systems and it specifies that you can continueworking offline if you lose your connection to a computer or the network. Any network files will continue to beavailable to you.

Part 4: Configure remote connections (4 Questions)

QUESTION 118You are the newly appointed desktop support technician at CertKiller.com. The CertKiller.com network consistsof a single Active Directory domain named CertKiller.com.

You are responsible for managing a workstation named CERTKILLER-WS680 that is configured to run

Windows 7. Several CertKiller.com users log onto CERTKILLER-WS680. CERTKILLER- WS680 contains afolder named CK_Data. You enable auditing on CK_Data. You need to ensure all access to CK_Data is logged.

What should you do?

A. You should consider starting the Problem Steps Recorder.ActualTests.com

B. You should consider configuring the Audit object access setting from the local Group Policy.C. You should consider configuring the Audit directory service Access setting from the local Group Policy.D. You should consider modifying the properties of the Security log from the Event Viewer.




You are working on a computer named CERTKILLER-WS680 that runs Microsoft Windows 7. During thecourse of the day you created a VPN connection on CERTKILLER-WS680 for connecting to the CertKiller.comnetwork. You want to ensure that you are still able to use the Internet while being connected to theCertKiller.com network via the VPN connection. You also want to ensure that Internet traffic is not routedthrough the CertKiller.com network.

What should you do?

A. You should consider assigning a static IP address and default gateway on CERTKILLER- WS680.B. You should consider configuring the security settings of the VPN connection on CERTKILLER- WS680.C. You should consider configuring the advanced TCP/IP settings of the VPN connection on CERTKILLER-

WS680.D. You should consider configuring a static DNS server address on CERTKILLER-WS680.



QUESTION 120You work as a desktop support technician at CertKiller.com. The CertKiller.com network consistsActualTests.comof a single Active Directory domain named CertKiller.com. All client computers on theCertKiller.com networkrun Windows 7.

A CertKiller.com user named Kara Lang has been assigned a portable client computer named CERTKILLER-WS680. Kara Lang is aware that CERTKILLER-WS680 has a Virtual Private Network (VPN) connectionconfigured to connect to the CertKiller.com network from remote locations. However, Kara Lang reports thatshe cannot locate the VPN connection on CERTKILLER-WS680.

What should you do?

A. You should inform Kara Lang to check in Ease of Access.

B. You should inform Kara Lang to check in System and Maintenance."Pass Any Exam. Any Time." - www.actualtests.com 103Microsoft 70-680: Practice Exam

C. You should inform Kara Lang to check in Network and Sharing Center.D. You should inform Kara Lang to check in Mobile PC.


Explanation/Reference:Explanation:The Network and Sharing Center program is where you would go to view all your network connections includingVPN connections. From within the Network and Sharing Center program, you can select the VPN connectionand connect to it.


You working on a Windows 7 workstation named CERTKILLER-WS680. You have received instruction toconfigure Windows Update on CERTKILLER-WS680. You open Windows Update as shown in the followingexhibit:

ActualTests.com

You need to ensure that the Windows Update settings on CERTKILLER-WS680 can be changed manually.

What should you do?

A. You should consider changing the Windows Update settings from the local Group Policy on CERTKILLER-WS680.

B. You should consider right-clicking Windows Update and choosing Run as administrator on CERTKILLER-WS680."Pass Any Exam. Any Time." - www.actualtests.com 105Microsoft 70-680: Practice Exam

C. You should consider right-clicking the command prompt and choosing Run as administrator to runWuapp.exe on CERTKILLER-WS680.

D. You should consider logging on to CERTKILLER-WS680 as member of the Administrators group.




You working on a workstation named CERTKILLER-WS680 that runs Microsoft Windows 7. You have receivedinstruction to have CERTKILLER-WS680 configured to download updates from a local Windows Server UpdateServices (WSUS) server.

What should you do?

A. You should consider changing the Windows Update settings from Windows Update on CERTKILLER-WS680.

B. You should consider changing the Windows Update settings from the local Group Policy on CERTKILLER-WS680.

C. You should consider changing the System Protection settings from the System settings on CERTKILLER-WS680.

D. You should consider changing the Location and Sensors settings from the local Group Policy onCERTKILLER-WS680



QUESTION 123You are employed as a network administrator at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run MicrosoftWindows 7. All client computers are configured for automatic updates.

The CertKiller.com network contains a client computer named CERTKILLER-WS680. After a recent update younotice that some of the applications on CERTKILLER-WS680 do not work. You reboot CERTKILLER-WS680but the applications still do not work. You need to remove the latest update.

What should you do?"Pass Any Exam. Any Time." - www.actualtests.com 106

Microsoft 70-680: Practice Exam

A. You should use Add or Remove Programs from the Control Panel.B. You should restore hidden updates.C. You should use Software Explorer.D. You should use the Installed updates list from Windows Update.


Explanation/Reference:Explanation:To uninstall a Windows Update, you can use the Installed updates list on the Windows Update window. Whenyou display the list of updates, you'll see an 'Uninstall' button in the toolbar. Simply select the update you wish touninstall, then click the Uninstall button.Incorrect Answers:A: In previous versions of Windows, you would use the Add or Remove Programs utility to uninstall WindowsUpdates. However, this was changed with Windows Vista. You should now use the Installed updates list on theWindows Update window.B: Restoring hidden updates will not uninstall an update.C: The Software Explorer utility is used to view detailed information about the programs that are currentlyrunning on your system. It is not used to uninstall updates.


You are working on a client computer named CERTKILLER-WS680 that runs Windows 7. CERTKILLER-WS680 has a Wake-on-LAN compliant network card. You configure Windows Update to run at night when thecomputer is shut down. You enable the Wake-on-LAN feature and configured the Enabling Windows UpdatePower Management settings on CERTKILLER-WS680. You need to ensure that Windows Update occurs atnight.

What should you do?

A. You should leave CERTKILLER-WS680 in hibernate mode at night.B. You should leave CERTKILLER-WS680 in sleep mode at night.C. You should shutdown CERTKILLER-WS680 at night.D. You should leave CERTKILLER-WS680 switched on at night.


Explanation/Reference:Explanation:To perform Windows Update installations to run at night, when computers are shut down, you need to Leavecomputers in hibernate mode at night. The computers in hibernate mode saves the contents of memory to a filecalled hiberfil.sys, thus you would not lose unsaved data in case of total power failure and thus can downloadthe Windows updates and perform installations.

QUESTION 125ActualTests.comYou work as the network Administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network client computers currently make use ofMicrosoft Windows XP Professional. CertKiller.com has recently decided to have the client computersupgraded to Microsoft Windows 7 with all the installed applications. During the course of the day you receive an

instruction from the CIO to install Federated Search connectors.

What should you do?

A. This can be accomplished by downloading the Shared Resource Kit for Federated Searches viaAmazon.com.

B. This can be accomplished having the Federated Search Installation Tool Pack bought online.Thereafter individual search connectors bought from various websites."Pass Any Exam. Any Time." - www.actualtests.com 108Microsoft 70-680: Practice Exam

C. This can be accomplished by having an .osdx file downloaded from a valid source.Thereafter the downloaded file should be double clicked and Add selected in order to install the file.

D. This can be accomplished by going to the website of Microsoft if your company is signed up to the MicrosoftFederated Search Tool Writers Guild.


Explanation/Reference:Explanation:Part 2: Manage disks (4 Questions)


You are assigned a workstation named CERTKILLER-WS680. CERTKILLER-WS680 is configured to runWindows 7. You open the Disk Management snap-in on CERTKILLER-WS680 as shown in the followingexhibit:

ActualTests.com

You want to create a new partition on Disk 0.

What should you do?

A. You should consider compressing volume C.B. You should consider converting Disk 0 into a dynamic disk.C. You should consider creating as well as initializing a Virtual Hard Disk (VHD).D. You should consider shrinking volume C.



QUESTION 127You work as the network Administrator at CertKiller.com. The CertKiller.com network consists of aActualTests.comsingle Active Directory domain named CertKiller.com. You are responsible for managing a computer namedCERTKILLER-SR05 that is configured to run Windows 7. CERTKILLER-SR05 is configured to host twovolumes named C and D. You are in the process of creating a new folder named D:\TESTDATA. During thecourse of the day you receive notification from management to make sure that files stored in TESTDATA areindexed by Windows search.

What should you do?

A. You should consider changing the Folder Options from the Control Panel.B. You should consider enabling the archive attribute on the folder.C. You should consider creating a new library and adding TESTDATA to it.D. You should consider changing the properties of the Windows Search service.





You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. You have been assigned a workstation named CERTKILLER-WS680 that is configured to run Windows 7.

You want to compile the performance data for a period of three weeks on CERTKILLER-WS680. Theperformance data should encompass CPU usage, memory usage as well as disk usage.

What should you do?

A. You should create an Event Trace Sessions Data Collector Set.B. You should create a Startup Event Trace Sessions Data Collector Set.C. You should create a User Defined Data Collector Set.D. You should add counters to the Performance Monitor.



QUESTION 129You are employed as the network Administrator at CertKiller.com. The CertKiller.com network consists of asingle Active Directory domain named CertKiller.com. You are responsible for managing a computer namedCERTKILLER-WS25 that is configured to run Windows 7. During the course of the day you receive aninstruction from the CIO to view the processes that produce network activity at present.

What should you do?

A. You should consider opening Windows Task Manager and clicking the Networking tab.B. You should consider opening Resource Monitor and clicking the Network tab.C. You should consider opening Performance Monitor and adding all counters for the network ActualTests.com

interface.D. You should consider opening Event Viewer and examining the NetworkProfile Operational log.



QUESTION 130CertKiller.com has employed you as a network Administrator. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All servers on the CertKiller.com network run Windows Server2008 and all mobile computers run Windows 7. You are assigned a mobile computer named CERTKILLER-WS20.

CERTKILLER-WS20 is configured to enter sleep mode if no activity takes place in 15 minutes.


You leave your office for 20 minutes and discover that CERTKILLER-WS20 has not entered into sleep mode.You are puzzled by the fact that CERTKILLER-WS20 has not entered into sleep mode and thus decide toidentify what could have caused this from happening.

What should you do?

A. You should consider reviewing the detailed performance and system information from PerformanceInformation and Tools.

B. You should consider running Powercfg energy at a command prompt.C. You should consider running Systeminfo /s localhost at a command prompt.D. You should consider reviewing the System Summary from Performance Monitor.



QUESTION 131You are employed as the network Administrator at CertKiller.com. The CertKiller.com network client computerscurrently make use of Microsoft Windows XP Professional. CertKiller.com has recently decided to have theclient computers upgraded to Microsoft Windows 7. You receive a complaint from a CertKiller.com user namedMia Hamm stating that the gamed included with Windows 7 were not installed by default on her computer. Youthus decide to install the games on her computer.

What should you do?

A. You are able to add or remove components in Windows 7 by right clicking the "My Computer" icon andselecting Choose Properties.Then Computer Management should be selected.Thereafter Add Remove Windows Components should be selected from left pane.ActualTests.com

B. You are able to add or remove components in Windows 7 by clicking the Start Bar and selecting ControlPanel.Thereafter Add/Remove Programs should be selected and Windows Components clicked.

C. You are able to add or remove components in Windows 7 by clicking the Start Bar and selecting ControlPanel.Thereafter Programs should be selected and the Turn Windows features should be clicked on or off.

D. You are able to add or remove components in Windows 7 by clicking the Start Bar.Then Settings should be selected.Thereafter you should select Windows Control Center.



QUESTION 132You work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. During the course of the day a network user named Rory Allenasked you which of the Microsoft Windows Setup configuration pass applies settings to Microsoft Windows 7before the Windows Welcome is started.ActualTests.com

A. You should consider instructing Rory Allen that specialize Microsoft Windows Setup configuration passapplies the settings.

B. You should consider instructing Rory Allen that the offlineServicing Microsoft Windows Setup configurationpass applies the settings.

C. You should consider instructing Rory Allen that the oobeSystem Microsoft Windows Setup configurationpass applies the settings.

D. You should consider instructing Rory Allen that the auditSystem Microsoft Windows Setup configurationpass applies the settings.


Explanation/Reference:Explanation:


Part 4: Configure performance settings (5 Questions)


A CertKiller.com user named Clive Wilson has been assigned a Windows 7 Professional client computernamed CERTKILLER-WS680. Clive Wilson reports that applications on CERTKILLER- WS680 are runningslowly. You notice that CERTKILLER-WS680 has 2 GB of RAM and 250 MB free disk space. You need toimprove performance on CERTKILLER-WS680.

What should you do? (Choose TWO.)

A. You should set the total paging file to 75 percent of physical memory.B. You should perform a disk analysis, and use the disk defragmenter, if recommended.C. You should use disk cleanup to delete temporary files and unnecessary program files.D. You should ensure that the performance options setting is optimized for background services.

Correct Answer: BCSection: (none)Explanation

Explanation/Reference:Explanation:The system in this scenario is showing symptoms that Dr. King is running out of disk space. The Disk Cleanuputility can be used to free some disk space. It's also a good idea to defragment the hard drive as a hard drivewhich is close to its maximum capacity can become fragmented fast.Incorrect Answers:ActualTests.comA: The minimum recommended setting of the page file is 1.5 times the physical memory, not 75%.D: On a Windows XP Professional computer the performance options should be optimized for Applications, notBackground services.


A CertKiller.com user named Amy Walsh has been assigned a mobile computer named CERTKILLER-WS680.Amy Walsh needs to travel extensively in the execution of her duties and has configured CERTKILLER-WS621to use the Power saver power plan. However, Amy Walsh


reports that CERTKILLER-WS680 does not shut down completely when she clicks the Power button icon onthe Start menu as the same programs that were opened when she tried to shut down the computer are stillopen when she restarts the computer.

You now need to configure CERTKILLER-WS680 to have it turn off completely without saving Amy Wilson'sdesktop session when she clicks the Power button icon on the Start menu.

What should you do?

A. You should click the 'Choose what power buttons do' link from 'Power Options' and choose the option toshut the computer down when the power button is pressed.

B. You should click the 'Change when computer sleeps' link from 'Power Options' and choose the option tonever put the computer to sleep when it is running on battery.

C. You should open 'Advanced Settings' for the current power plan from 'Power Options' and change the 'Onbattery' setting in the 'Sleep after' category to 'Never'.

D. You should open 'Advanced Settings' for the current power plan from 'Power Options' and change the 'Startmenu power button' setting to 'Shut down'.


Explanation/Reference:Explanation:: You should change the Start menu power button setting to Shut down in Advanced Settings. To openAdvanced Settings, first open Power Options and click the Change plan settings link associated with the Powersaver power plan. Then click the Change advanced power settings link to open the Advanced Settings dialogbox. Expand Power buttons and lid, and then expand Start menu power button. Change the On battery settingto Shut down. This causes Windows to completely shut down when the Power button icon on the Start menu isclicked.

QUESTION 135ActualTests.comYou work as a network administrator at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The servers on the network run Microsoft Windows Server 2008 andthe client computers run Microsoft Windows 7. During the course of the day you receive instruction fromCertKiller.com to increase the size of the paging file for a server named CERTKILLER-SR01.

What should you do?

A. You should consider having the Advanced system settings modified from System.B. You should consider having the System protection setting modified from System.C. You should consider having the boot partition shrunk from Disk Management.D. You should consider having the system partition shrunk from Disk Management.





You are working a Windows 7 workstation named CERTKILLER-WS680. You want to backup data onCERTKILLER-WS680. You open the Configure Backup wizard as shown in the exhibit below:


You to be able to backup the data to a local disk drive.

What should you do?

A. You should consider adding your user account to the Backup Operators group before running the ConfigureBackup wizard.

B. You should consider starting the Volume Shadow Copy Service (VSS) before running the Configure Backupwizard.

C. You should consider logging on to CERTKILLER-WS680 as an administrator before running the ConfigureBackup wizard. ActualTests.com

D. You should consider disconnecting all removable disks from CERTKILLER-WS680 before running theConfigure Backup wizard.



QUESTION 137

You work as the desktop technician at CertKiller.com. The CertKiller.com network consists of a single ActiveDirectory domain named CertKiller.com. The CertKiller.com network contains 10 Windows 2000 Servercomputers, 50 Windows XP Professional client computers, 100 Windows Vista Business computers and 150Windows 7 Professional client computers.


A CertKiller.com user named Mia Hamm uses a Windows 7 Professional client computer namedCERTKILLER-WS680. Important business planning documents and files are stored on CERTKILLER-WS680.You have been instructed to ensure that data on CERTKILLER-WS680 can be recovered in the event of a diskfailure. You install a robotic tape library that contains two Digital Audio Tape (DAT) cartridges in CERTKILLER-WS680.

You want to perform a full backup every Saturday afternoon and incremental backups every Tuesday andThursday evening. You plan to perform the full backup manually but you want the incremental backups to takeplace as a scheduled task. You also want the incremental backups made on the Tuesday evening to be writtento one tape and the incremental backups made on the Thursday evening to be written to the other tape.

What should you do to accomplish these goals?

A. For Tuesday evening, create a scheduled backup job that runs once using a tape from the free media pool.For Thursday evening, create another scheduled backup job that runs once using a tape from the freemedia pool. Then create a scheduled backup job that runs every Tuesday evening and another that runsevery Thursday evening.

B. On Tuesday evening, run a manual incremental backup job and assign a name to the tape used for thatday. On Thursday evening, run another manual incremental backup job and assign a different name to thetape used for Thursdays. Then create scheduled incremental backup jobs for Tuesday and Thursdayevenings and specify the name of the tape to be used in each incremental backup job.

C. Use the rsm command-line utility to run the incremental backup jobs for Tuesday and Thursday evenings.D. Use the Removable Storage console to assign a different name to each tape. Then create scheduled

incremental backup jobs for Tuesday and Thursday evenings and specify the name of the tape to be usedin each incremental backup job.


Explanation/Reference:ActualTests.comExplanation:To ensure that the same tape gets used for the Tuesday backup and a different one on Thursdays, you mustassign the tape a name. This can be done during a manual backup job during which you can assign a name tothe tape. This name is stored in the tape's header and can be specified in subsequent scheduled backup jobs.This will ensure that one tape is used for the Tuesday backup and the other is used for the Thursday backup.

Incorrect answers:A: You need to assign a name to the tape so that it can be specified for the scheduled backup job. However,when you create a scheduled backup job that uses a tape from the free media pool, all data on the tape,including any name stored in the tape header will be deleted.C: You can use the rsm command-line utility to create, delete, and manage media pools, to


mount, dismount, and eject media, and to display information about removable storage resources.It cannot be used to run backup jobs.D: You can use the Removable Storage console to manage removable storage libraries and to displayinformation about the media in each pool, but you cannot use the Removable Storage console to assign a

name to a tape. You need to assign a name to each tape so that you can specify which tape should be usedduring the scheduled backup. Part 2: Configure system recovery options (6 Questions)

QUESTION 138You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. The CertKiller.com network contains a client computer namedCERTKILLER-WS680 that is running Windows 7. CERTKILLER-WS680 contains two volumes named VolumeC and Volume D.

You have created a document named CKdoc.docx on Volume D and you have manually created a restore pointfor the document before editing document. You want to be able to restore the document to its current version ifand document is edited any further.

What should you do?


A. You should consider starting the Volume Shadow Copy Service (VSS).B. You should consider using the System Protection on volume D.C. You should consider enabling Auditing on the document.D. You should consider running the Disk Cleanup on volume D.



QUESTION 139ActualTests.comYou are employed as a network administrator at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on the CertKiller.com network run MicrosoftWindows 7.

The CertKiller.com network contains a client computer named CERTKILLER-WS680. After a recent criticalupdate you notice that CERTKILLER-WS680 is unstable. You now want to use system restore to restoreCERTKILLER-WS680 to an earlier point.

What should you do?

A. D"Pass Any Exam. Any Time." - www.actualtests.com 123Microsoft 70-680: Practice Exam


Explanation/Reference:Explanation:Step #1:Click on the Start button, open the Control Panel and select 'System and Security'

Step #2:Select ' Action Center '

ActualTests.com


Step #3:Select 'Recovery'

ActualTests.com

Step #4:Click on the 'Open System Restore' button


Step #5:Click 'Next' on the 'Restore System Files and Settings' dialog box

ActualTests.com

Step #6:Select the 'Show more restore points' check box, select the restore point you to use and click 'Next'.


Step #7:Select 'Finish' on the Confirm your restore point' page.

ActualTests.com


QUESTION 140You work as a desktop support technician at CertKiller.com. The CertKiller.com network consists of a singleActive Directory domain named CertKiller.com. All client computers on theCertKiller.com network run Windows7. You are working on a client computer named CERTKILLER-WS680. CERTKILLER-WS680 is configuredwith two hard disk drives named Drive C and Drive D. Both hard disks drives are formatted with the NTFS filesystem. You need to disable previous versions on the Drive D.

What should you do?

A. You should use the Disk Management snap-in to convert Drive D to a Dynamic volume.B. You should modify the Quota settings on Drive D.C. You should consider modify the Sharing settings on Drive D.D. You should modify the System protection setting from System Properties.

