microbrewery equipment for sale
TRANSCRIPT
Brewery EquipmentStrong Points
PRESENTED BY JINAN XIMO INTERNATIONAL TRADE CO., LTD.
Quality of the Material
Our company (Jinan
XIMO International Trade
Co., LTD.) only uses
Austenitic Stainless Steel
304/316 produced from
virgin ores in order to
ensure that the ratio of
18/8 and 18/10
(Chromium/Nickel
percentages) is always
met.
Example of a Quality Certificate that we provide our customers that shows the
chemical composition used for the production of the Stainless Steel.
All Production is Meticulously Done by Hand
One thing that we are really proud of is that all of our brewery equipment is produced by hand by our very experienced manufacturing employees (with about 20 years of experience.)
This allows us to tailor any equipment to meet the specific needs of any of our clients with any design that they might have in mind. Not only that, we ensure that all welding and polishing will be properly made to ensure both the safety of the client as well as provide an aesthetically appealing exterior.
Leftt: Example of an exterior tank shaped by hand and temporarily welded to ensure
that the dimensions are correct.
Right: Red Arrow: Hand welded, cleaned and polished by our employees
Yellow Arrow: Machine Welded
Example of how a properly polished finish for tubing on a tank would look like.
Example of a hand welded dual zone
glycol jacketed fermenter that has not
been finalized. Because it is handmade,
this gives us the flexibility to provide any
modifications in order to optimize the
surface area that the dimple plate jacket
would cover.
Red Arrow: Finalized hand welding on a
fermenter.
Green Arrow: Finalized hand polishing on a fermenter on a mirror coated fermenter.
Red Arrow: We ensure that every single
polish is properly smoothed out (especially on any mirror coated equipment.)
We only use High Quality
Components that will last a very
long timeFor every single equipment, we ensure that we are using
the best components we can provide in order to
guarantee our customer that they are receiving a high end
product that will provide consistency in their brews and
that will work time and time again for a very, very long
time.
We provide picture-documentation of anything of
importance to the customer in order to provide an ease of
mind that cheap components are not being used.
Laser-cut V-shaped False Bottom Filter
with slits that have a width of 0.7 to 0.9mm.
Left: Weighing the Butterfly Valve to ensure that all of the valves
have the same weight and that the material is Stainless Steel 316.
Right: Checking the engraving that confirms the material of the
Butterfly Valve and the diameter of the valve.
Red Arrow: Base of the top man-way that is welded onto the fermenter.
Yellow Arrow: “Lid” of the top man-way that is screwed onto the fermenter.
Left: This is the top man-way that most factories in China use when producing a fermenter.
The "Lid” is very thin compared to the base that is welded onto the fermenter.
Right: This is the top man-way that is used at Jinan XIMO International Trade Co., LTD. The
“Lid” is almost as thick as the base that is the base that is welded onto the fermenter. This
eliminates the possibilities of the man-way deforming over time due to the pressures it will
encounter as well as ensure the safety of all personnel handling the equipment.
We Highly Endorse Both Efficiency and Safety
Here at Jinan XIMO, we want to guarantee our customers
that the equipment we want to provide them is both
efficient and safe to use.
We do not take any shortcuts during our production, which
is why we use the best materials in order to allow ourselves
to properly manufacture a system that will help minimize
usage of materials (ingredients, cleaning materials, etc.)
and at the same time protect anyone that might need to
operate the equipment.
Example of One of the Collector tubes at
the bottom of the brew kettle/whirlpool
tank that has been properly polished in
order to eliminate a contamination point as well as facilitate the cleaning process.
Properly polished interior of a fermenter (0.3μm) that will prevent
contamination points and can be efficiently cleaned without the need to
scrub the interior.
Improved fermenter design for the man-way installation (Right)
Contrary to the traditional production method (Left), our new design (Right)
offers an additional safety feature that helps increase the amount of pressure
that the fermenters can withstand from 0.2Mpa (2 Bar) to 0.3Mpa (3Bar).
Interior wiring of the fermenters to avoid issues with dangling cables.
We Provide our Customer With
Convenience and a Beautiful Final Product
We take into consideration the objectives of our client and
provide modifications accordingly to the equipment. We
will do our best to provide our customer with different
options or alternatives that can be done in order to attain
the desired goal that they are looking for.
In this manner, the client will receive a brewery equipment
that is not only convenient, efficient and safe but also
extremely elegant and appealing.
Finalized 300L Brew House with a copper finish.
Finalized 600L fermenters with a mirror polished exterior.
Finalized Equipment (Rear View)
Finalized Equipment (front view.)
Thank You For Your
Time!
FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE AT WWW.CHINA-XIMO.COM OR SEND US AN EMAIL AT [email protected]