microarc oxidation - keronite
DESCRIPTION
Keronite® Surface Treatment for Light AlloysTRANSCRIPT
![Page 1: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/1.jpg)
Keronite® Surface Treatment for Light Alloys
ASETS2009 ConferenceDenver 2 Sep 2009
Steve Hutchins
![Page 2: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/2.jpg)
Wear ResistantExtremely HardChemical ResistanceElectrical ResistanceThermal BarrierSuperb AdhesionClean Technology
What is Keronite?
An advanced surface treatment for aluminium, magnesium and other light alloys
A patented process based on a technology known as Plasma Electrolytic Oxidation (PEO)
Plasma process converts light alloy surface into a hard layer of protective ceramics
A family of coatings
Opens up new applications for light alloys
A clean technology
![Page 3: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/3.jpg)
The Keronite Process
PowerSignal
PowerSupply
Keronite uses a plasma discharge to convert the substrate surface into complex ceramics
The part is introduced into the tank and connected to the power supply
A plasma discharge forms, creating very high energy conditions localised in a thin surface layer.
Key process characteristics Oxidation of the substrateElementary co-deposition from the
electrolyteFusing of the layer via plasma discharges
Air
HeatExchanger
Pump
RecirculatingElectrolyte
![Page 4: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/4.jpg)
4
CleanTechnology
XADHESION
SUPERB
Keronite Properties
![Page 5: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/5.jpg)
Up to 2,000 HV on aluminiumUp to 700 HV on magnesium
Comparative hardness (HV)
0 500 1000 1500 2000 2500
Aluminium
Mild Steel
304 Stainless Steel
Hard Anodized Aluminium
Hardened Tool Steel
Hard Chrome
KERONITE™ on Aluminium
Hardness
![Page 6: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/6.jpg)
Hardness
Keronite coating on 7075 Hardcoat anodising on 7075
![Page 7: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/7.jpg)
0
50
100
150
Nitridedsteel
Uncoated 2xxx alloy
Uncoated 5xxx alloy
Keronite coated
2xxx alloy
Keronite coated
5xxx alloy
Steady StateOver 1000 revs
Vol
umet
ric
wea
r ra
te (m
m3
/ km
)
Wear rates – ASTM G65
Source: ABB, Cambridge University and Southampton University, poster presented at Materials Congress 2006.
![Page 8: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/8.jpg)
Ford Cyclic Corrosion Testing on Mg
Keronite meets or exceeds the requirements of AMS 2466 “Hard Anodic Coatings for Magnesium Alloys”
Keronite
Keronite + ecoat
Cr6 + powder
Diecast Mg AM60 test plates, 30 day cyclic testing
![Page 9: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/9.jpg)
Galvanic corrosion protection
Mg plate + stainless
steel screw
Galvanic corrosion after just 7 hours in salt fog
Mg plate + Keronite on
Al screw
Mg plate + zinc plated steel screw
Mg plate + anodised Al
screw
Confidential
![Page 10: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/10.jpg)
Flexibility
100µm detached Keronite film showing ability to be bent or flattened elastically
In more severe deformation, both plastic and elastic deformation occurs before failure
Flexibility gives the coating resilience against small impacts or deformation of the substrate. Avoids cracking and delamination in-service
Courtesy of Cambridge University
1cm
![Page 11: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/11.jpg)
High Dielectric Strength CoatingsHigh Dielectric Strength Coatings
Breakdown voltage (max unsealed) Thickness
Alloy V um
6xxx 1500 50
5xxx 2500 80
LM24 540 8-20
99.9Al 560 15AA6xxx
Average voltage breakdown figures3000V has been achieved when sealed.Thin layers give low thermal barrier
Power electronics cooling devices.
![Page 12: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/12.jpg)
Composite coatings
Polymers : Paints, lacquers, PTFE, E-coats, powder coats, organic-non organic polymersMetals : Ni, Cu (electroless), PVD, CVDCeramics: PVD, CVD
500 nm
Nanometre-scale porosity facilitates impregnation
![Page 13: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/13.jpg)
Sharp edges and corners
![Page 14: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/14.jpg)
Keronite on Ti-6-4
Courtesy: University of Bologna
![Page 15: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/15.jpg)
Keronite on Ti - friction
Courtesy: University of Bologna
Cylinder-on-flat disc dry sliding wear
5-20N loadØ40mm steel
cylinder plasma sprayed with Al2O3 + TiO2 of 1180 HV
0.6m/sSliding
distance 5000m
![Page 16: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/16.jpg)
Keronite on Ti - Wear
Courtesy: University of Bologna
>10x more wear resistant than Ti Type 2 anodising according to AMS2488Anti-fretting gimbal bearings on satellites
![Page 17: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/17.jpg)
Applications
![Page 18: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/18.jpg)
Marinized aluminium components
Keronite
Trilobit 2 seismic node, at 4000m deep seabed operated by ROVCourtesy: Carrack Measurement Technology and CGGVeritas
![Page 19: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/19.jpg)
Aluminium sprockets
Harder than sandWeight savingRedesigned from Steel to AlImproved in service performanceClean Technology
Harder than sand, Keronite enables the replacement of steel with aluminium and 66% weight savings, with superior performance
Extract from distributor website: “these ceramic coated alloy rear sprockets will outlast ordinary alloy sprockets by 300%, AND increase the life of your chain too.”
![Page 20: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/20.jpg)
Aluminium print rollers
Harder than sandWeight savingRedesigned from Steel to AlImproved in service performanceClean Technology
Hard chrome replacement
Faithfully follows gravure pattern on surface
Improved wear resistance and corrosion resistance
No galvanic action between coating and roller
![Page 21: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/21.jpg)
Ball valves
Keronite gives the advantages of a ceramic finish for the cost of an aluminium component –fuel line ball valvesProvides excellent wear protection against PTFE seals, ingrained dirt etc
![Page 22: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/22.jpg)
Black aluminium coating
Keronite Black Al coating demonstrates resistance to the extremes of temperature found in space
Thermal emissivity approx 0.84
Absorption coefficient approx 0.90-0.95 over optical and near IR range.
Corrosion resistance allows use of high-strength alloys
Fully UV stable
![Page 23: Microarc oxidation - Keronite](https://reader034.vdocuments.mx/reader034/viewer/2022052207/55cf98e0550346d0339a2f96/html5/thumbnails/23.jpg)
Thank you
For more information please contact:
Bill BuchmanKeronite Inc
Greenwood [email protected]
Tel 586 677 2443