micro irrigation - adritec irrigation.pdf · micro irrigation irrigation tubing 11 pvc pipes are...

Click here to load reader

Post on 02-Jun-2020

9 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Y O U R W A Y

    MICROIRRIGATION1

    adritec.com

  • Micro IrrigationAdritec enjoys 30 years of experience in manufacturing micro irrigation systems. It offers a wide range of irrigation tubing in PVC, HDPE, LDPE, Lay Flat, in addition to a comprehensive range of driplines whether in cylindrical turbulent flow and pressure compensating drippers, flat turbulent flow and pressure compensating drippers, two types of flat tapes either with a strip along the pipe or a welded labyrinth type tape, and a wide selection of online turbulent and pressure compensating and variable flow ON-LINE drippers. These products are offered with a wide range of dripper flow rates to accommodate the different requirements of its network of international clients.

    “Complete Solutions For Your Irrigation Needs”

  • MICROIRRIGATION

    1a. Irrigation Tubing1a1- PVC Pipes1a2- HDPE Pipes1a3- LDPE Adripipe1a4- Lay Flat Pipes

    1b. Driplines1b1- Adriline1b2- Adripc1b3- Miniline1b4- Adrilite1b5- Green Tape1b6- Eco Tape

    1c. On Line Emitters & Bubblers1c1- Naya ADJ1c2- Nein ETF1c3- Nein EPC1c4- Eden NDC1c5- Petra PCD1c6- Gaza Bubbler

    1

  • Micro Irrigation

    Irrigation Tubing

    1a1a1- PVC Pipes1a2- HDPE Pipes1a3- LDPE Adripipe1a4- Lay Flat Pipes

  • Micro IrrigationIrrigation Tubing

    11

    PVC pipes are used for the Underground water feeding and distribution networks for sprinkler and drip irrigation systems, potable water supply, drainage systems, domestic plumping, in addition to different other applications. PVC pipes are produced in grey color ac-cording to DIN 8061/62 standards with diameter range from 32mm up to 160mm or more. The standard pipe length is 6 meters. All PVC pipes supplied are solvent welding joint socket type or rubber joint socket type. Different pressure ratings are available depending on application.

    Code Nominal size mmPressure Rating S mm

    WT Kg / Mt

    1 A 1 P V C P 1 0 0 3 232

    PN 10.0 1.8 0.264

    1 A 1 P V C P 1 6 0 3 2 PN 16.0 2.4 0.342

    1 A 1 P V C P 0 6 0 4 0

    40

    PN 6.0 1.8 0.334

    1 A 1 P V C P 1 0 0 4 0 PN 10.0 2.0 0.350

    1 A 1 P V C P 1 6 0 4 0 PN 16.0 3.0 0.525

    1 A 1 P V C P 0 6 0 5 0

    50

    PN 6.0 1.8 0.422

    1 A 1 P V C P 1 0 0 5 0 PN 10.0 2.4 0.522

    1 A 1 P V C P 1 6 0 5 0 PN 16.0 3.7 0.809

    1 A 1 P V C P 0 6 0 6 3

    63

    PN 6.0 1.9 0.562

    1 A 1 P V C P 1 0 0 6 3 PN 10.0 3.0 0.854

    1 A 1 P V C P 1 6 0 6 3 PN 16.0 4.7 1.290

    1 A 1 P V C P 0 4 0 7 5

    75

    PN 4.0 1.8 0.642

    1 A 1 P V C P 0 6 0 7 5 PN 6.0 2.2 0.782

    1 A 1 P V C P 1 0 0 7 5 PN 10.0 3.6 1.220

    1 A 1 P V C P 1 6 0 7 5 PN 16.0 5.6 1.820

    Code Nominal size mmPressure Rating S mm

    WT Kg / Mt

    1 A 1 P V C P 0 4 0 9 0

    90

    PN 4.0 1.8 0.774

    1 A 1 P V C P 0 6 0 9 0 PN 6.0 2.7 1.130

    1 A 1 P V C P 1 0 0 9 0 PN 10.0 4.3 1.750

    1 A 1 P V C P 1 6 0 9 0 PN 16.0 6.7 2.610

    1 A 1 P V C P 0 4 1 1 0

    110

    PN 4.0 2.2 1.160

    1 A 1 P V C P 0 6 1 1 0 PN 6.0 3.3 1.640

    1 A 1 P V C P 1 0 1 1 0 PN 10.0 5.3 2.610

    1 A 1 P V C P 1 6 1 1 0 PN 16.0 8.2 3.900

    1 A 1 P V C P 0 4 1 2 5

    125

    PN 4.0 2.5 1.480

    1 A 1 P V C P 0 6 1 2 5 PN 6.0 3.7 2.130

    1 A 1 P V C P 1 0 1 2 5 PN 10.0 6.0 3.344

    1 A 1 P V C P 1 6 1 2 5 PN 16.0 9.3 5.010

    1 A 1 P V C P 0 4 1 4 0

    140

    PN 4.0 2.8 1.840

    1 A 1 P V C P 0 6 1 4 0 PN 6.0 4.1 2.650

    1 A 1 P V C P 1 0 1 4 0 PN 10.0 6.7 4.180

    1 A 1 P V C P 1 6 1 4 0 PN 16.0 10.4 6.270

    1 A 1 P V C P 0 4 1 6 0

    160

    PN 4.0 3.2 2.410

    1 A 1 P V C P 0 6 1 6 0 PN 6.0 4.7 3.440

    1 A 1 P V C P 1 0 1 6 0 PN 10.0 7.7 5.470

    1 A 1 P V C P 1 6 1 6 0 PN 16.0 11.9 8.170

    U-PVC Pressure Pipe Specification according to DIN 8061/62

    Note: All standard dimensions are available, any other size that is not listed in the above table can be supplied upon request

    1a1 PVC PIPES

  • Micro IrrigationIrrigation Tubing

    12

    HDPE Pipes are used for water feeding and distribution networks in sprinkler and drip irrigation systems. It is produced from PE 80 or PE 100 HDPE pipe grade material. HDPE pipes are produced in black color for irrigation water, blue color for potable water, and purple color for treated water. All HDPE Pipes are UV stabilized produced according to DIN 8074 standards. The range of diameters available starts from 16 mm up to 500 mm.

    Code Nominal size mmPressure Rating S mm

    WT Kg / Mt

    1 A 2 H D P P 1 2 0 1 616

    PN 12.5 1.8 0.084

    1 A 2 H D P P 1 6 0 1 6 PN 16.0 2.2 0.099

    1 A 2 H D P P 1 0 0 2 0

    20

    PN 10.0 1.9 0.112

    1 A 2 H D P P 1 2 0 2 0 PN 12.5 2.3 0.133

    1 A 2 H D P P 1 6 0 2 0 PN 16.0 2.8 0.154

    1 A 2 H D P P 1 0 0 2 5

    25

    PN 10.0 2.3 0.171

    1 A 2 H D P P 1 2 0 2 5 PN 12.5 2.8 0.200

    1 A 2 H D P P 1 6 0 2 5 PN 16.0 3.5 0.240

    1 A 2 H D P P 0 6 0 3 2

    32

    PN 6.0 1.8 0.179

    1 A 2 H D P P 1 0 0 3 2 PN 10.0 2.9 0.272

    1 A 2 H D P P 1 2 0 3 2 PN 12.5 3.6 0.327

    1 A 2 H D P P 1 6 0 3 2 PN 16.0 4.4 0.386

    1 A 2 H D P P 0 4 0 4 0

    40

    PN 4.0 1.8 0.227

    1 A 2 H D P P 0 6 0 4 0 PN 6.0 2.3 0.285

    1 A 2 H D P P 1 0 0 4 0 PN 10.0 3.7 0.430

    1 A 2 H D P P 1 2 0 4 0 PN 12.5 4.5 0.509

    1 A 2 H D P P 1 6 0 4 0 PN 16.0 5.5 0.600

    1 A 2 H D P P 0 3 0 5 0

    50

    PN 3.2 1.8 0.287

    1 A 2 H D P P 0 4 0 5 0 PN 4.0 2.0 0.314

    1 A 2 H D P P 0 6 0 5 0 PN 6.0 2.9 0.440

    1 A 2 H D P P 1 0 0 5 0 PN 10.0 4.6 0.666

    1 A 2 H D P P 1 2 0 5 0 PN 12.5 5.6 0.788

    1 A 2 H D P P 1 6 0 5 0 PN 16.0 6.9 0.936

    1 A 2 H D P P 0 3 0 6 3

    63

    PN 3.2 2.0 0.399

    1 A 2 H D P P 0 4 0 6 3 PN 4.0 2.5 0.494

    1 A 2 H D P P 0 6 0 6 3 PN 6.0 3.6 0.688

    1 A 2 H D P P 1 0 0 6 3 PN 10.0 5.8 1.050

    1 A 2 H D P P 1 2 0 6 3 PN 12.5 7.1 1.260

    1 A 2 H D P P 1 6 0 6 3 PN 16.0 8.6 1.470

    HDPE Pressure Pipe PE80 Specification according to DIN 8074/8075

    Code Nominal size mm

    Pressure Rating

    S mm WT Kg / Mt

    1 A 2 H D P P 0 3 0 7 5

    75

    PN 3.2 2.3 0.551

    1 A 2 H D P P 0 4 0 7 5 PN 4.0 2.9 0.675

    1 A 2 H D P P 0 6 0 7 5 PN 6.0 4.3 0.966

    1 A 2 H D P P 1 0 0 7 5 PN 10.0 6.8 1.470

    1 A 2 H D P P 1 2 0 7 5 PN 12.5 8.4 1.760

    1 A 2 H D P P 1 6 0 7 5 PN 16.0 10.3 2.090

    1 A 2 H D P P 0 3 0 9 0

    90

    PN 3.2 2.8 0.791

    1 A 2 H D P P 0 4 0 9 0 PN 4.0 3.5 0.978

    1 A 2 H D P P 0 6 0 9 0 PN 6.0 5.1 1.390

    1 A 2 H D P P 1 0 0 9 0 PN 10.0 8.2 2.120

    1 A 2 H D P P 1 2 0 9 0 PN 12.5 10.1 2.540

    1 A 2 H D P P 1 6 0 9 0 PN 16.0 12.3 3.000

    1 A 2 H D P P 0 3 1 1 0

    110

    PN 3.2 3.4 1.170

    1 A 2 H D P P 0 4 1 1 0 PN 4.0 4.2 1.430

    1 A 2 H D P P 0 6 1 1 0 PN 6.0 6.3 2.080

    1 A 2 H D P P 1 0 1 1 0 PN 10.0 10.0 3.140

    1 A 2 H D P P 1 2 1 1 0 PN 12.5 12.3 3.780

    1 A 2 H D P P 1 6 1 1 0 PN 16.0 15.1 4.490

    1 A 2 H D P P 0 3 1 2 5

    125

    PN 3.2 3.9 1.510

    1 A 2 H D P P 0 4 1 2 5 PN 4.0 4.8 1.840

    1 A 2 H D P P 0 6 1 2 5 PN 6.0 7.1 2.660

    1 A 2 H D P P 1 0 1 2 5 PN 10.0 11.4 4.080

    1 A 2 H D P P 1 2 1 2 5 PN 12.5 14.0 4.870

    1 A 2 H D P P 1 6 1 2 5 PN 16.0 17.1 5.770

    1 A 2 H D P P 0 3 1 4 0

    140

    PN 3.2 4.3 1.880

    1 A 2 H D P P 0 4 1 4 0 PN 4.0 5.4 2.320

    1 A 2 H D P P 0 6 1 4 0 PN 6.0 8.0 3.340

    1 A 2 H D P P 1 0 1 4 0 PN 10.0 12.7 5.080

    1 A 2 H D P P 1 2 1 4 0 PN 12.5 15.7 6.110

    1 A 2 H D P P 1 6 1 4 0 PN 16.0 19.2 7.250

    1 A 2 H D P P 0 3 1 6 0

    160

    PN 3.2 4.9 2.420

    1 A 2 H D P P 0 4 1 6 0 PN 4.0 6.2 3.040

    1 A 2 H D P P 0 6 1 6 0 PN 6.0 9.1 4.350

    1 A 2 H D P P 1 0 1 6 0 PN 10.0 14.6 6.670

    1 A 2 H D P P 1 2 1 6 0 PN 12.5 17.9 7.960

    1 A 2 H D P P 1 6 1 6 0 PN 16.0 21.9 9.440

    1a2 HDPE PIPES

    Note: HDPE PE80 grade - Minimum required strength (MRS 8) Design Stress (SIGMA 5.0) - S is wall Thickness in mm, WT is weight in kg / mt.

  • Micro IrrigationIrrigation Tubing

    13

    Adripipe plain irrigation high pressure pipes are used as lateral lines in drip irrigation systems, mainly in applications using the on-line emit-ters & bubblers. Manufactured from extrusion grade materials the pipes are produced in black color for irrigation water, blue for potable water and purple for treated water. Available in three different outer diameters of 12mm, 16mm, 20mm and 25mm in a wide range of wall thicknesses; 12 mm OD pipe with wall thickness of 0.70mm - 1.50mm, the 16 mm OD pipe with a wall thickness of 0.70mm - 1.50 mm and the 20 mm OD pipe with a wall thickness of 1.00mm -1.80mm and the 25mm OD pipe with a wall thickness of 1.2 - 1.8mm. Pressure rating at 20 Celsius Degree is 3.0 - 4.2 bar according to the wall thickness.

    Code Nominal size mm S mm

    1 A 3 L D P T 0 7 0 1 2

    12 mm

    0.70

    1 A 3 L D P T 0 8 0 1 2 0.80

    1 A 3 L D P T 0 9 0 1 2 0.90

    1 A 3 L D P T 1 0 0 1 2 1.00

    1 A 3 L D P T 1 2 0 1 2 1.20

    1 A 3 L D P T 1 5 0 1 2 1.50

    1 A 3 L D P T 0 7 0 1 6

    16 mm

    0.70

    1 A 3 L D P T 0 8 0 1 6 0.80

    1 A 3 L D P T 0 9 0 1 6 0.90

    1 A 3 L D P T 1 0 0 1 6 1.00

    1 A 3 L D P T 1 2 0 1 6 1.20

    1 A 3 L D P T 1 5 0 1 6 1.50

    1 A 3 L D P T 1 0 0 2 0

    20 mm

    1.00

    1 A 3 L D P T 1 2 0 2 0 1.20

    1 A 3 L D P T 1 3 0 2 0 1.30

    1 A 3 L D P T 1 5 0 2 0 1.50

    1 A 3 L D P T 1 8 0 2 0 1.80

    1 A 3 L D P T I 2 0 2 5

    25 mm

    1.20

    1 A 3 L D P T 1 3 0 2 5 1.30

    1 A 3 L D P T 1 5 0 2 5 1.50

    1 A 3 L D P T 1 8 0 2 5 1.80

    LDPE ADRIPIPE1a3

    Micro tubes are produced from either PVC or LDPE grade materials and are used to connect lateral PE tubes to on-line emitters, with distributors and micro stakes. They are also used as a long path emitter to deliver different flows at the same pressure according to tube length. The micro tubes come in rolls of 500 and 1000 meters.

    Code Nominal Size mm S mm

    1 A 3 M T L D 0 6 0 1 0 6.00 1.00

    1 A 3 M T L D 0 5 8 0 9 5.80 0.90

    1 A 3 M T L D 0 5 6 0 8 5.60 0.80

    1 A 3 M T L D 0 5 3 0 7 5.30 0.70

    1 A 3 M T L D 0 5 1 0 6 5.10 0.60

  • Micro IrrigationIrrigation Tubing

    14

    The Lay Flat hose are light in weight, easy for transportation and storage, flexible easy to wind / unwind, and are unlimited in length. They are made of high-strength polyester cotton yarn, with PVC inside and outside lining. They are produced from environmentally friendly raw materials and are UV resistant with a working temperature range from -10° to +60° C. Widely used in water transportation, portable sprinkler irrigation system, drip irrigation systems, agricultural farming and all construction work.

    Code Size Inch

    Inner Diametermm

    Bar Kg / m

    1 A 4 L F P V 0 2 0 1 0

    1" 25.40

    2.0 0.120

    1 A 4 L F P V 0 3 0 1 0 3.0 0.130

    1 A 4 L F P V 0 4 0 1 0 4.0 0.140

    1 A 4 L F P V 0 6 0 1 0 6.0 0.156

    1 A 4 L F P V 0 8 0 1 0 8.0 0.170

    1 A 4 L F P V 1 0 0 1 0 10.0 0.185

    1 A 4 L F P V 0 2 0 1 4

    1 1/4" 31.60

    2.0 0.140

    1 A 4 L F P V 0 3 0 1 4 3.0 0.150

    1 A 4 L F P V 0 4 0 1 4 4.0 0.175

    1 A 4 L F P V 0 6 0 1 4 6.0 0.195

    1 A 4 L F P V 0 8 0 1 4 8.0 0.210

    1 A 4 L F P V 1 0 0 1 4 10.0 0.230

    1 A 4 L F P V 0 2 0 1 2

    1 1/2" 38.00

    2.0 0.180

    1 A 4 L F P V 0 3 0 1 2 3.0 0.200

    1 A 4 L F P V 0 4 0 1 2 4.0 0.240

    1 A 4 L F P V 0 6 0 1 2 6.0 0.270

    1 A 4 L F P V 0 8 0 1 2 8.0 0.300

    1 A 4 L F P V 1 0 0 1 2 10.0 0.320

    1 A 4 L F P V 0 2 0 2 0

    2" 50.30

    2.0 0.240

    1 A 4 L F P V 0 3 0 2 0 3.0 0.300

    1 A 4 L F P V 0 4 0 2 0 4.0 0.350

    1 A 4 L F P V 0 6 0 2 0 6.0 0.370

    1 A 4 L F P V 0 8 0 2 0 8.0 0.390

    1 A 4 L F P V 1 0 0 2 0 10.0 0.420

    1 A 4 L F P V 0 2 0 2 2

    2 1/2" 63.50

    2.0 0.320

    1 A 4 L F P V 0 3 0 2 2 3.0 0.380

    1 A 4 L F P V 0 4 0 2 2 4.0 0.450

    1 A 4 L F P V 0 6 0 2 2 6.0 0.480

    1 A 4 L F P V 0 8 0 2 2 8.0 0.520

    1 A 4 L F P V 1 0 0 2 2 10.0 0.550

    Code Size Inch

    Inner Diametermm

    Bar Kg / m

    1 A 4 L F P V 0 2 0 3 0

    3" 78.20

    2.0 0.380

    1 A 4 L F P V 0 3 0 3 0 3.0 0.470

    1 A 4 L F P V 0 4 0 3 0 4.0 0.570

    1 A 4 L F P V 0 6 0 3 0 6.0 0.630

    1 A 4 L F P V 0 8 0 3 0 8.0 0.690

    1 A 4 L F P V 0 2 0 4 0

    4" 101.60

    2.0 0.520

    1 A 4 L F P V 0 3 0 4 0 3.0 0.580

    1 A 4 L F P V 0 4 0 4 0 4.0 0.720

    1 A 4 L F P V 0 6 0 4 0 6.0 0.800

    1 A 4 L F P V 0 8 0 4 0 8.0 0.900

    1 A 4 L F P V 0 2 0 5 0

    5" 127.00

    2.0 0.750

    1 A 4 L F P V 0 3 0 5 0 3.0 0.850

    1 A 4 L F P V 0 4 0 5 0 4.0 0.950

    1 A 4 L F P V 0 6 0 5 0 6.0 1.100

    1 A 4 L F P V 0 8 0 5 0 8.0 1.200

    1 A 4 L F P V 0 2 0 6 0

    6" 152.40

    2.0 0.900

    1 A 4 L F P V 0 3 0 6 0 3.0 1.050

    1 A 4 L F P V 0 4 0 6 0 4.0 1.200

    1 A 4 L F P V 0 6 0 6 0 6.0 1.400

    1 A 4 L F P V 0 2 0 8 0

    8" 203.20

    2.0 1.450

    1 A 4 L F P V 0 3 0 8 0 3.0 1.550

    1 A 4 L F P V 0 4 0 8 0 4.0 1.700

    1 A 4 L F P V 0 6 0 8 0 6.0 1.900

    1 A 4 L F P V 0 2 1 0 010" 254.00

    2.0 2.300

    1 A 4 L F P V 0 3 1 0 0 3.0 2.500

    LAY FLATPIPES1a4

  • bMicro Irrigation

    Driplines

    11b1- Adriline1b2- Adripc1b3- Miniline1b4- Adrilite1b5- Green Tape1b6- Eco Tape

  • Micro IrrigationDriplines

    17

    The Adriline is a joint less multi seasonal drip pipe with 4 water outlets and a self-cleaning built in stariner at its inlet. It is produced in three different outside diameters, mainly 12mm, 16mm, and 20mm with different wall thicknesses ranging from 0.7mm to 1.0mm. The inline turbulent flow labyrinth type self cleaning dripper comes with a size of 69mm, with two different discharge rates 2LPH and 4LPH. It is produced at different dripper spacing starting from 20CM.

    1b1 ADRILINE

    Max. Lateral Running Length ( m )

    CodeEmitters Spacing ( cm )

    10 20 30 40 50 60 75 100

    1B1GR16072XX - 71 92 111 129 145 168 202

    1B1GR16082XX - 69 90 109 126 142 164 198

    1B1GR16092XX - 67 88 106 123 138 160 193

    1B1GR16102XX - 66 86 104 120 135 156 188

    1B1GR16074XX - 41 54 65 75 84 98 118

    1B1GR16084XX - 40 53 63 73 82 95 115

    1B1GR16094XX - 39 51 62 72 81 93 112

    1B1GR16104XX - 38 50 60 70 79 91 109

    1B1GR20072XX - 104 136 165 191 215 248 300

    1B1GR20082XX - 102 134 162 187 211 244 294

    1B1GR20092XX - 100 131 159 184 207 239 289

    1B1GR20102XX - 99 129 156 180 203 235 283

    1B1GR20074XX - 62 82 98 114 128 149 179

    1B1GR20084XX - 61 80 97 112 126 146 176

    1B1GR20094XX - 60 79 95 110 124 143 173

    1B1GR20104XX - 59 77 93 108 121 140 169

    CodeAverage Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar X Kd

    1B1GR16101XX 1.12 1.46 1.64 1.99 2.28 2.57 0.508 1.62

    1B1GR16104XX 2.71 3.48 3.86 4.65 5.43 5.96 0.489 3.86

    1B1GR20102XX 1.30 1.63 1.80 2.20 2.60 2.90 0.456 1.80

    1B1GR20104XX 2.70 3.40 3.80 4.70 5.40 6.00 0.494 3.80

    Recommended Operating Pressure 1.0 Bar.

    1 Flow Variation 10%.2 XX Emitter spacing in cm.

  • Micro IrrigationDriplines

    18

    The Adripc features a cylindrical pressure compensating self-cleaning emitter with similar mechanical properties as the Adriline. It uses a silicone diaphragm that ensures uniform discharge and water flow uniformity for variable system pressures ranging from 1.0 to 4.0 bars. The silicon rubber diaphragm initiates a self-flushing cycle that allows cleaning of debris. It is ideal for use in irrigation systems with long lateral length requirements, uneven terrain, mountainous farmland or farms with high slopes. It is applied in both agricultural and land-scape irrigation applications. Adripc is produced in different diameters 16mm, 18mm and 20mm with different pipe wall thicknesses. Emitters are available with two different discharge rates 2 and 4 LPH and at spacing starting from 20cm.

    1b2 ADRIPC

    1B2PC16072XX 121 158 191 221 248 287 347

    1B2PC16082XX 118 154 186 215 243 281 339

    1B2PC16092XX 115 151 182 210 237 274 331

    1B2PC16102XX 112 147 177 205 231 268 323

    1B2PC16074XX 63 82 99 115 130 150 181

    1B2PC16084XX 62 80 97 112 127 146 176

    1B2PC16094XX 60 79 95 110 124 143 172

    1B2PC16104XX 59 77 93 107 121 140 168

    Code Average Flow Rate ( LPH ) Emitter's

    0.5 1.0 Bar 1.5 Bar 2.0 Bar 3.0 Bar 4.0 Bar X Kd

    1B2PCOD002XX 1.22 1.68 1.72 1.75 1.66 1.49 0.093 1.680

    1B2PCOD004XX 3.46 4.58 4.50 4.35 4.10 3.90 0.037 4.580

    Recommended Operating Pressure 1.0 - 4.0 Bars.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    20 30 40 50 60 75 100

    1B2PC16072XX 95 124 150 173 195 225 272

    1B2PC16082XX 93 121 146 169 190 220 266

    1B2PC16092XX 90 118 143 165 186 215 259

    1B2PC16102XX 88 115 139 161 181 210 253

    1B2PC16074XX 50 65 78 90 102 118 142

    1B2PC16084XX 48 63 76 88 99 115 138

    1B2PC16094XX 47 62 74 86 97 112 135

    1B2PC16104XX 46 60 73 84 95 109 132

    1 Inlet Pressure 1.5 Bars.2 Zero Slope.3 Pipe OD=16 mm, ID= 14.6 mm, 14.4 mm, 14.2 mm & 14.0 mm.4 At Emitter Operating Pressure 1.0 Bar.

    1 Inlet Pressure 2.0 Bars.2 Zero Slope.3 Pipe OD=16 mm, ID= 14.6 mm, 14.4 mm, 14.2 mm & 14.0 mm.4 At Emitter Operating Pressure 1.0 Bar.

  • Micro IrrigationDriplines

    19

    The Miniline is a jointless multi seasonal drip pipe similar to the Adriline in all mechanical properties but for using a 39mm and 33mm tur-bulent flow cylindrical emitter, with 4 water outlets and a self-cleaning built in strainer at its inlet. It is produced in 16mm and 20mm OD pipes, with emitter discharge rates of 2LPH, 4LPH, 8LPH, and a pipe thickness ranging from 0.9mm down to 0.7mm at an emitter spacing starting from 20cm. It is an economical virgin of the Adriline, applied with the same types of crops as that of the Adriline, but for its low pipe thickness and smaller emitter size which allows it to be used for longer lateral lengths and more economical applications.

    1b3 MINILINE

    CodeMax. Lateral Running Length ( m )

    Emitters Spacing ( cm )

    10 20 30 40 50 60 75 100

    1B3ML16072XX - 57 75 90 104 118 136 164

    1B3ML16082XX - 56 73 88 102 115 133 160

    1B3ML16092XX - 55 71 86 100 112 130 156

    1B3ML16074XX - 38 50 60 70 78 91 109

    1B3ML16084XX - 37 49 59 68 77 89 107

    1B3ML16094XX - 37 48 58 66 75 86 104

    1B3ML16078XX - 24 31 38 44 49 57 68

    1B3ML16088XX - 24 31 37 43 48 55 67

    1B3ML16098XX - 23 30 36 42 47 54 65

    CodeAverage Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar X Kd

    1B3ML16102XX 1.57 1.99 2.27 2.73 3.19 3.55 0.507 2.24

    1B3ML16104XX 2.99 3.79 4.27 5.18 6.05 6.69 0.502 4.26

    1B3ML16108XX 5.84 7.57 8.59 10.56 12.16 13.67 0.526 8.59

    Recommended Operating Pressure 1.0 Bar.

    * Flow Variation 10%.

  • Micro IrrigationDriplines

    20

    The Adrilite is a light low thickness irrigation pipe with a tubulent flow flat emitter that features a self-cleaning built in strainer at its inlet for efficient water filtration. It is produced with an OD of 17mm and 22.6mm in several thicknesses ranging from 0.15mm up to 0.6mm and is available in many emitter discharge rates of 1.07 LPH, 1.78 LPH, 2.1 LPH, and 3.74 LPH, at a pressure of 0.8 bars. The Adrilite is used for all types of crops including cotton, banana plantations, sugarcane and maize. It can be used for one or multi season applications depending on the pipe wall thickness. Its low pipe thickness and small sized flat emitter allows it to be used for longer lateral lenghts and more economical applications.

    1b4 ADRILITE

    CodeAverage Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar X Kd

    1B4LOD0011XX 0.81 1.07 1.23 1.54 1.82 2.06 0.579 1.22

    1B4LOD0021XX 1.62 2.10 2.40 3.00 3.50 4.00 0.560 2.39

    1B4LOD0018XX 1.37 1.78 1.98 2.45 2.87 3.16 0.521 1.98

    1B4LOD0037XX 2.92 3.74 4.14 5.13 5.92 6.57 0.505 4.16

    Recommended Operating Pressure 0.8 Bar.1 OD :Pipe Out Diameter in mm.2 XX : Emitters Spacing In cms.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    10 20 30 40 50 60 75 100

    1B4L170811XX - 102 133 161 186 210 243 293

    1B4L171211XX - 100 130 158 182 205 238 287

    1B4L171811XX - 97 126 153 177 199 230 278

    1B4L172411XX - 94 122 148 171 193 223 269

    1B4L170821XX - 67 87 105 122 137 158 191

    1B4L171221XX - 65 85 103 119 134 155 187

    1B4L171821XX - 63 83 100 115 130 150 181

    1B4L172421XX - 61 80 97 112 126 146 175

    1B4L170818XX - 76 100 120 139 157 181 219

    1B4L171218XX - 75 98 118 136 154 178 214

    1B4L171818XX - 72 95 114 132 149 172 208

    1B4L172418XX - 70 92 111 128 144 167 201

    1B4L170837XX - 48 62 75 87 98 113 137

    1B4L171237XX - 47 61 74 85 96 111 134

    1B4L171837XX - 45 59 72 83 93 108 130

    1B4L172437XX - 44 57 69 80 90 104 126

    1 Inlet Pressure 0.943 Bar.2 Pipe OD=17 mm, ID=16.6mm, 16.4 mm, 16.1 mm & 15.8 mm .3 Zero Slope.4 Flow Variation 10%.5 At Emitter Operating Pressure 0.8 Bar.

  • Micro IrrigationDriplines

    21

    ADRILITE

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    10 20 30 40 50 60 75 100

    1B4L220811XX - 159 208 251 291 328 380 458

    1B4L221211XX - 156 205 248 287 323 374 451

    1B4L221811XX - 153 200 242 280 315 365 440

    1B4L222411XX - 149 195 236 273 308 356 430

    1B4L220821XX - 103 134 162 188 212 245 296

    1B4L221221XX - 101 132 160 185 209 241 291

    1B4L221821XX - 99 129 156 181 204 236 284

    1B4L222421XX - 96 126 152 176 199 230 277

    1B4L220818XX - 114 149 181 209 236 273 329

    1B4L221218XX - 112 147 178 206 232 269 324

    1B4L221818XX - 110 144 174 201 227 262 316

    1B4L222418XX - 107 140 170 196 221 256 309

    1B4L220837XX - 71 92 112 129 146 169 203

    1B4L221237XX - 69 91 110 127 143 166 200

    1B4L221837XX - 68 89 107 124 140 162 195

    1B4L222437XX - 66 87 105 121 137 158 191

    1 Inlet Pressure 0.943 Bar.2 Pipe OD=22 mm, ID=21.6mm, 21.4 mm, 21.1 mm & 20.8 mm .3 Zero Slope.4 At Emitter Operating Pressure 0.8 Bar.5 Flow Variation 10%.

  • Micro IrrigationDriplines

    22

    GREEN TAPE

    The Green Tape is an irrigation tape with the emitter labyrinth strip welded to the inside of the extruded tape. It is produced in 17mm and 22.6mm outside diameter and wall thicknesses ranging from 0.15mm up to 0.25mm and a flow of 1.03 LPH at 0.8 bars. Emitter spacing starts from 10cm with 10 cm equal intervals up to 100cm. It can be used for subsurface irrigation applications using 150 mesh filtration.

    Code Average Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.2 Bar 1.5 Bar X Kd

    1B5GT17061XX 0.77 1.03 1.16 1.30 1.51 0.61 1.17

    Recommended Operating Pressure 0.8 Bar.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    10 20 30 40 50 60

    1B5GT17061XX 65 104 136 164 190 213

    1B5GT17081XX 65 103 134 162 188 211

    1 Inlet Pressure 0.94 Bar.2 Pipe OD=17 mm, ID=16.7mm & 16.6 mm.3 Zero Slope.4 Flow Variation 10%.

    1 Inlet Pressure 1.0 Bar.2 Pipe OD=17 mm, ID=16.7mm & 16.6 mm .3 Zero Slope.4 Flow Variation 15%.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    10 20 30 40 50 60

    1B5GT17061XX 75 120 157 190 220 247

    1B5GT17081XX 75 119 155 188 217 245

    1b5

  • Micro IrrigationDriplines

    23

    The Eco Tape thin wall dripline features a turbulent flow track emitter that provides a high level of watering uniformity. Each outlet is part of the drip emitter, providing reliable drip flow without squirting. The slit at the outlet reduces insect damage, impedes root intrusion and eliminates plugging from external contaminants at start-up. The water in the supply tube passes into the turbulent channel through multiple filtering inlets. The water next passes through a vortex type turbulent flow channel to regulate the discharge flow before exiting through the outlet. The advanced turbulent flow design uses large passageways which are less likely to clog and provide more uniform discharge for longer lenghts of run than most drip tape technologies. The Eco Tape is produced in 4mil, 6 mil, 8 mil and 10 mil thicknesses in 17mm and 22mm Outside Diameter. Eco Tape is mostly recommended for use for agricultural irrigation, farm irrigation and garden applications.

    Recommended Operating Pressure 0.8 Bar.

    1 Inlet Pressure 0.96 Bar.2 Pipe OD=17 mm, ID=16.8, 16.7mm, 16.6 mm & 16.5 mm .3 Zero Slope.4 Flow Variation 10%.

    1 Inlet Pressure 1.43 Bar.2 Pipe OD=17 mm, ID=16.8, 16.7mm, 16.6 mm & 16.5 mm .3 Zero Slope.4 Flow Variation 15%.

    1b6 ECO TAPE

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( cm )

    10 20 30 40 50 60

    1B6ET17041XX 82 131 171 206 239 269

    1B6ET17061XX 81 129 169 204 236 266

    1B6ET17081XX 80 128 167 202 234 264

    1B6ET17101XX 80 127 166 200 232 261

    Code Average Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.2 Bar 1.5 Bar X Kd

    IB6ET17XX1XX 0.80 1.04 1.15 1.28 1.43 0.53 0.34

    Max. Lateral Running Length ( m )

    CodeEmitters Spacing ( cm )

    10 20 30 40 50 60

    1B6ET17041XX 71 113 147 178 206 232

    1B6ET17061XX 70 111 146 176 204 229

    1B6ET1708110 69 110 144 174 202 227

    1B6ET17101XX 69 109 143 172 200 225

  • cMicro Irrigation

    On Line Emitters& Bubblers

    11c1- Naya ADJ1c2- Nein ETF1c3- Nein EPC1c4- Eden NDC1c5- Petra BCD1c6- Gaza Bubbler

  • Micro IrrigationOn Line Emitters & Bubblers

    25

    Naya is a variable flow emitter with a flow rate from zero to 60 LPH at 1 bar nominal pressure. Its flow is adjusted by clicking the top cover which has 6 to 32 clicks. It gives a 360 degree flow pattern. Its inlet is 5mm. Naya is suitable for a wide variety of landscape and nursery applications, easy to install with a removable cap for inspection and cleaning.

    1c1 NAYA ADJ

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.50 0.75 1.0 1.25 1.5 1.75 2.0 2.25 2.50

    1C1OLADJ0060 14 19 22 26 29 32 34 37 40

    Code Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 1.0 Bar 1.5 Bar 2.0 Bar X kd

    1C1OLADJ0060 41.0 51.3 56.6 66.8 76.0 0.44 56.60

    Average Flow Rate ( LPH ) vs. Number Of Clicks

    Code Number Of Clicks

    2 4 6 8 10 12 16

    1C1OLADJ0060 6 12 14 16 21 27 35

    Average Flow Rate ( LPH ) vs. Number Of Clicks

    Code Number Of Clicks

    18 20 22 24 26 28 32

    1C1OLADJ0060 39 43 46 49 52 56 60

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.50 0.75 1.0 1.25 1.5 1.75 2.0 2.25 2.50

    1C1OLADJ0060 12 16 19 22 25 27 30 32 34

    1 Inlet Pressure 1.37 Bar.2 Zero Slope.3 Flow Variation 15%

    1 Inlet Pressure 1.24 Bar.2 Zero Slope.3 Emitters Mounted On Pipe OD=16 mm, ID= 13.6 mm.4 At Emitter Operating Pressure 1 Bar.5 Number Of Clicks 31 - 326 Flow Variation 10%

    Operating Pressure 1 Bar.

    1 31 - 32 Clicks.

    Pressure

    Pressure

    Pressure

  • Micro IrrigationOn Line Emitters & Bubblers

    26

    The Nein ETF drippers are on-line turbulent flow emitters with a removable top cap which allows easy inspection and cleaning. The turbu-lent flow emitters are produced in four models mainly 2.23 LPH, 4.21 LPH, 7.53 LPH, and 16.0 LPH at 1 bar. It is ideal for orchards, vienyards, and irrigation of fruit trees. The inlet OD is 5mm, suitable for installation with 4mm ID micro tubes.

    NEIN ETF1c2

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00

    1C2OLETF0002 142 171 223 268 310 349 386 421 486

    1C2OLETF0004 90 109 142 171 197 222 245 267 308

    1C2OLETF0008 62 75 98 118 136 153 169 184 212

    1C2OLETF0016 39 47 60 73 84 94 104 113 131

    Code Average Flow Rate ( LPH ) Emitter's

    0.5 Bar 0.8 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar X Kd

    1C2OLETF0002 1.55 1.99 2.23 2.64 3.12 3.55 0.50 2.21

    1C2OLETF0004 2.84 3.71 4.21 5.27 6.12 6.98 0.56 4.19

    1C2OLETF0008 5.16 6.71 7.53 9.32 10.93 12.24 0.55 7.53

    1C2OLETF0016 10.7 14.06 15.99 19.79 22.95 25.13 0.53 15.99

    Recommended Operating Pressure 1.0 Bar.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00

    1C2OLETF0002 122 147 192 231 267 300 332 362 418

    1C2OLETF0004 78 94 122 147 170 191 211 230 265

    1C2OLETF0008 54 65 84 101 117 131 145 158 183

    1C2OLETF0016 33 40 52 63 72 81 89 97 112

    1 Inlet Pressure 1.19 -1.2 Bar.2 Zero Slope.3 Emitters Mounted On Pipe OD=16 mm, ID= 13.6 mm.4 At Emitter Operating Pressure 1 Bar.5 Flow Variation 10%.

    1 Inlet Pressure 1.28 -1.32 Bar.2 Zero Slope.3 Flow Variation 15%.

  • Micro IrrigationOn Line Emitters & Bubblers

    27

    1c3 NEIN EPC

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00

    1C3OLEPC0004 115 138 180 217 251 282 312 340 393

    1C3OLEPC0008 68 82 107 129 149 168 185 202 233

    1 Inlet Pressure 2.0 Bars.2 Zero Slope.3 Emitters Mounted On Pipe OD=16 mm, ID= 13.6 mm.4 At Emitter Operating Pressure 1.5 Bars.

    Recommended Operating Pressure Range 0.5 - 4 Bars.

    Code

    0.5 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar 3.0 Bar 3.5 Bar 4.0 Bar 4.8 Bar X Kd

    Average Flow Rate ( LPH ) Emitter'sCode

    1C3OLEPC004 3.80 4.02 4.08 4.18 4.10 4.12 4.20 4.20 4.26 0.04 3.68

    1C3OLEPC008 7.66 8.02 8.06 8.14 8.24 8.30 8.44 8.50 8.55 0.05 8.48

    The Nein PC drippers are an on-line pressure compensating flow emitter with a removable top cap and a silicone rubber diaphragm that regulates water discharge at different pressures. The pressure compensating flow emitters are produced in two models mainly 4.02 LPH and 8.02 LPH at 1 bar. It is ideal for orchards, vineyards and irrigation of fruit trees, particularly for hilly non even terrain and long ir-rigation lines. The inlet OD is 5mm, suitable for intallation with a 0.4mm ID micro tube.

  • Micro IrrigationOn Line Emitters & Bubblers

    28

    EDEN PCNO-DRAIN1c4

    The Eden PC No-drain emitter is a pressure compensating no drain emitter with a silicone rubber diaphragm and a built in wide turbulent flow labyrinth. The No-drain self-flushing feature with an opening pressure of 0.5 bar and a shut off pressure of 0.15 bar prevents drainage from the system allowing quick system start up and shut off. It is produced in three models with flow rates of 2.07 LPH, 3.62 LPH, and 7.76 LPH at 1 bar pressure. The Eden drippers have a 5mm barbed nipple at its inlet and outlet making it easy for mounting on a 4mm micro tube in addition to a 2 or 4 distributor outlet connection with different types of stakes depending on the application required. Ideal for irrigating fruit trees, orchards, and hydroponic systems.

    Code Average Flow Rate ( LPH ) Emitter's

    1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar 3.0 Bar 3.5 Bar 4.0 Bar X Kd

    1C4OLNDPC002 2.07 2.35 2.51 2.59 2.65 2.63 2.58 0.165 2.20

    1C4OLNDPC004 3.62 4.16 4.41 4.54 4.53 4.48 4.35 0.135 3.89

    1C4OLNDPC008 7.76 9.01 9.52 9.46 9.05 8.55 7.92 0.018 8.45

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00

    1C4OLNDPC002 161 194 252 304 351 395 437 476 550

    1C4OLNDPC004 111 134 174 209 242 272 301 328 379

    1C4OLNDPC008 67 81 105 127 146 164 182 198 229

    Recommended Operating Pressure Range 1.5 - 4 Bars.Opening Pressure 0.4 Bar.Closing Pressure 0.15 Bar.

    1 Inlet Pressure 2.0 Bars.2 Zero Slope.3 Emitters Mounted On Pipe OD=16 mm, ID= 13.6 mm.4 At Emitter Operating Pressure 1.5 Bars.

  • Micro IrrigationOn Line Emitters & Bubblers

    29

    1c5 PETRA PCD

    Petra PCD is a long flow path emitter with a single barded outlet. It has a hook which allows easy attachment to the irrigation pipe. The removable male part allows easy inspection and cleaning. It is produced with a nominal discharge rate of 8 LPH @ 1 bar, and has a 6mm barbed inlet.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.50 0.75 1.0 1.25 1.5 1.75 2.0 2.25 2.50

    1C5OLPEPCD08 33 43 52 60 68 75 81 88 94

    Code Average Flow Rate ( LPH ) Emitter's

    0.5 Bar 1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar X Kd

    1C5OLPEPCD08 4.3 8.0 11.4 14.6 17.6 0.88 7.99

    Recommended Operating Pressure 1.0 Bar.

    Max. Lateral Running Length ( m )

    Code Emitters Spacing ( m )

    0.50 0.75 1.0 1.25 1.5 1.75 2.0 2.25 2.50

    1C5OLPEPCD08 38 50 60 69 78 86 94 101 108

    1 Inlet Pressure 1.11 Bar.2 Zero Slope.3 Emitters Mounted On Pipe OD=16 mm, ID= 13.6 mm.4 At Emitter Operating Pressure 1 Bar.5 Flow Variation 10%.

    1 Inlet Pressure 1.17 Bar.2 Zero Slope.3 Flow Variation 15%.

  • Micro IrrigationOn Line Emitters & Bubblers

    30

    GAZABUBBLER1c6

    The Adjustable Flow Bubbler, model BUF, incorporates a stainless steel non-corrosive flow regulating screw. Water comes out in the shape of an umbrella. The nominal flow is 1.5 GPM (340 lph). Made out of high quality ABS material.

    The Bubbler BPC is a pressure compensated bubbler that incorporates a high quality diaphragm to ensure pressure compensating flow characteristics between 1 - 3 bars. Water in the BPC bubbler trickels down the body itself for the low flow bubbler, and sprays out in a full circle umbrella shape with the high flow rate models. It is manufactured from a high quality ABS material.

    A specially designed stake (1C6OLSTK1238) is provided to suit both models of bubbler with an inlet diameter of 16mm and an outlet of 1/2" (Plain and MPT) and 3/8" (FPT). The filter supplied for both models is a 60 mesh filter (1C6OLFLT0060).

    Gaza Adjustable Flow Bubbler BUF

    Gaza Bubbler BPC

    Bubbler Stake & Filter

    Max. Lateral Running Length ( m )

    Code Bubblers Spacing ( m )

    0.75 1.00 1.50 2.00 2.50

    1C6OLBPC0050 16 19 24 29 33

    1C6OLBPC0051 10 12 16 19 21

    1C6OLBPC0052 8 10 13 15 17

    * Zero Flow, when the bubbler's screw is fully screwed.* 1.0 GPM Equal 227 LPH.* Number of turns how is many times the Bubbler's screw is turned anti-clock wise.* Recommended Operating Pressure 1.0 Bar.

    * Recommended Operating Pressure Range 2.0 - 3.5 Bars.* 1.0 GPM Equal 227 LPH.

    Code

    Average Flow Rate ( LPH )

    Number0.5 Bar 1.0 Bar 1.5 Bar 2.0 Bar

    Of / Turns

    1C6OLBUF0150

    0 0 0 0 0

    8 227 283 327 415

    9 308 386 450 522

    12 360 438 519 596

    Code Average Flow Rate ( LPH )

    1.0 Bar 1.5 Bar 2.0 Bar 2.5 Bar 3.0 Bar

    1C6OLBPC0050 116 139 154 168 184

    1C6OLBPC0051 234 275 300 304 307

    1C6OLBPC0052 304 363 418 431 479

    1 Inlet Pressure 2.5 Bars.2 Zero Slope.3 Bubblers Mounted On Pipe OD=20 mm, ID= 17.0 mm.4 At Bubbler Operating Pressure 2.0 Bars.