mh004

prev

next

out of 3

Upload: ricardo-omar

Post on 06-Jan-2016

214 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

curva

TRANSCRIPT

R1R2R3

Technical Note Ref: MH004/01 March 2005 - metal was introduced into the mould via a Kalpur sleeve and the offset between the bottom of the Kalpur and the base of the mould was 5mm for all the casts made here. Nine tests will be performed, one on N-Tec ingot, and four on each batch provided by the client: two ... Technical Note Ref: MH004/01 March 2005 Metallographic