The Corner Radius design offers improved strength and tool life The SGS Corner Radius geom-etry is CNC ground during the initial manufacturing process, not modified later Available in a wide variety of standard metric radius sizes and diameters Produced from certified lab in-spected micrograin carbide Offered from stock with

for additional protection and per-formance

Series 1M Corner Radius

Metric Corner Radius End Mills

www.sgstool.com

Performance, Precision, Passion

Tolerances (mm)Diameter d1 d2

4 - 16+0,000 / -0,050

+0,000 / -0,010

Corner Radius Tolerances (mm)

+0,000 / -0,050

Series 1MCRCutting

Diameter d1

Shank Diameter

d2

Length of Cut

l2

Overall Length

l1

Corner Radius

Ti-Na-mite-A (AlTiN)

EDP No.4mm 4mm 14mm 50mm 0,25mm 400004mm 4mm 14mm 50mm 0,50mm 400014mm 4mm 14mm 50mm 1,0mm 400035mm 6mm 16mm 50mm 0,25mm 400045mm 6mm 16mm 50mm 0,50mm 400055mm 6mm 16mm 50mm 1,0mm 400076mm 6mm 19mm 50mm 0,25mm 400096mm 6mm 19mm 50mm 0,50mm 400106mm 6mm 19mm 50mm 0,75mm 400116mm 6mm 19mm 50mm 1,0mm 400128mm 8mm 20mm 63mm 0,50mm 400158mm 8mm 20mm 63mm 0,75mm 400168mm 8mm 20mm 63mm 1,0mm 400178mm 8mm 20mm 63mm 1,5mm 400198mm 8mm 20mm 63mm 2,0mm 40020

10mm 10mm 22mm 75mm 0,5mm 4002110mm 10mm 22mm 75mm 1,0mm 4002310mm 10mm 22mm 75mm 1,5mm 4002410mm 10mm 22mm 75mm 2,0mm 4002512mm 12mm 25mm 75mm 0,5mm 4002812mm 12mm 25mm 75mm 1,0mm 4003012mm 12mm 25mm 75mm 1,5mm 4003112mm 12mm 25mm 75mm 2,0mm 4003216mm 16mm 32mm 89mm 0,5mm 4003516mm 16mm 32mm 89mm 1,0mm 4003716mm 16mm 32mm 89mm 1,5mm 4003816mm 16mm 32mm 89mm 2,0mm 40039

55 South Main Street • Munroe Falls, Ohio 44262 • Phone (330) 686-5700

www.sgstool.comCatalog EDP No. 00010 Item Id - 1MCR_FLYER © SGS Tool Company