methyl soyate formulary guide

Download Methyl Soyate Formulary Guide

Post on 21-Dec-2016

213 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Methyl Soyate

    The Formulary Guide for

    a biobased alternative to petrochemicals

    The Formulary G

    uide for Methyl Soyate

    To learn more about methyl soyate,contact the United Soybean Board.

    www.unitedsoybean.org/newuses

    newuses@unitedsoybean.org

  • Methyl soyate: The naturalsolution for safer solvents.As companies strive to improve safety for their employees and meet regulatory requirements, interest in biobased products that can replace petroleum-basedchemicals is growing. Methyl soyate, a biobased solventmade from soybean oil, is an excellent replacment forpetrochemical solvents. It offers numerous advantagesover traditional solvents.

    Safety advantages. High flash point (greater than 360 degrees F) Low VOC levels (

  • Methyl soyate is the product of soybeanfarmer initiative.Every farmer in the country contributesto the soybean checkoff at the rate of0.5 percent of the market price perbushel sold.These funds are invested inprograms that can add value andincrease demand for U.S. soybeans.Methyl soyate was developed becauseof checkoff-funded efforts and theforesight of U.S. soybean farmers.

    United Soybean Board.Farmers investing in the future.

    Consisting of 64 farmer-directors, theUnited Soybean Board (USB) overseescheckoff funds that are invested innational programs, includingInternational Marketing, DomesticMarketing, New Uses, Production andCommunications.The widespreadefforts of USBs New Uses Committeehave resulted in the development andcommercialization of methyl soyate.

  • Methyl SoyateSpecifications forSolvent Applications In order to achieve optimum resultsfrom the formulations in this guide,it is important to utilize soy methylesters that meet the following propertystandards.These standards have beenvoluntarily set by this industry to provide consistent product quality.

    PROPERTY METHOD* LIMITS UNITS

    Total Glycerin ASTM D 6584 0.240 max % mass

    Free Glycerin ASTM D 6584 0.02 max % mass

    Flash Point (Closed Cup) ASTM D 93 100.0 min C

    Kinematic Viscosity ASTM D 445 3.9 to 4.3 mm2

    Acid Number ASTM D 664 0.25 max % mass

    Specific Gravity ASTM D 1298 0.885-0.905

    Moisture ASTM D 2709 0.5 max % mass

    Cloud point ASTM D 2500 2 max C

    Kauri-Butanol Value ASTM D 1133 57 min

    Iodine Value ASTM D 1959 130 min

    Vapor Pressure ASTM D 5191 1.0 max mm Hg

    VOC level EPA method 24 or South Coast 50 max g/lAir Quality District Method 304

    *Other test methods may be used if technically equivalent to those listed.

  • General Purpose Cleaners

    GeneralPurposeCleaners

  • All-Purpose Cleaner ConcentrateAn all-purpose cleaner concentrate that can be diluted with water and used onhard surfaces, such as counter tops, to remove dirt.

    FORMULATIONIngredients % by WeightSTEPOSOL SB-W 7.95d-Limonene, Technical Grade 1.98NINOL 11-CM 68.41Westvaco L-5 (Westvaco) Fatty Acid 6.08Triethanolamine, 99% 3.42D.I. Water 6.08Propylene Glycol 6.08Total 100.00

    PROCEDURECombine and mix components in the order listed above.

    PHYSICAL PROPERTIESAppearance at 25C Clear, yellow liquidpH, as is 9.0 10.0Viscosity at 25C, cps 150 350Density, lbs/gal 8.24Flash Point, F (PMCC) >201

    STORAGE/STABILITY4 weeks at 25C Stable4 weeks at 4C Stable4 weeks at 50C StableFreeze/Thaw, 10 cycles Pass

    INSTRUCTIONS FOR USEDilute concentrate by adding 1 part concentrate to 9 parts water.

    EXTERNAL COMMENTA 1:1 dilution or 1:3 dilution in water yields a thick product.

    REGISTERED TRADEMARKS OF STEPAN COMPANYNINOLSTEPOSOL

  • FOR ADDITIONAL ASSISTANCE

    For applications or product handling assistance, call our TechnicalService Department at 1-800-745-7837 (U.S.) or 011-334-76-505-100(Europe).

    For ordering assistance, call our Customer Service Department at 1-800-457-7673.

    Nothing contained herein grants or extends a license, expressed or implied, in connection withpatents, issued or pending, of the manufacturer or others. The information contained herein isbased on the manufacturers own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the informationcontained herein. The manufacturer shall not be liable (regardless of fault) to the vendees employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

    Courtesy of:

    Stepan Company22 West Frontage Rd.Northfield, IL 60093800-745-7837

  • Multipurpose Cleaner WITH STEPOSOL SB-W

    This multipurpose cleaner can be used on all surfaces for removing dirt, dustand grease.

    FORMULATIONIngredients % by WeightPhase 1NINOL 11-CM 82.14STEPOSOL SB-W* 17.86Phase 2Blend from Phase 1 24.19Butyl Carbitol Solvent (Dow Chemical) Butoxydiglycol 4.81Versene 100 (Dow Chemical) Tetrasodium EDTA 3.21D.I. Water q.s. to 100Total 100.00

    PROCEDUREBlend STEPOSOL SB-W and NINOL 11-CM together with mixing toform Phase 1 Blend. Then take the required amount of blend and add allother components as listed, mixing until clear after each addition.

    PHYSICAL PROPERTIESAppearance at 25C Clear, yellow liquidpH, as is 9.5 11.0Viscosity at 25C, cps 10 50Density, lbs/gal 8.23Solids, % 22 25Flash Point, F (PMCC) >171

    STORAGE/STABILITY1 month at 25C Stable1 month at 50C Stable1 month at 4C StableFreeze/Thaw, 10 cycles Pass

    INSTRUCTIONS FOR USESpray on surface and let stand for several seconds. Wipe away withcloth. No water needed.

  • EXTERNAL COMMENT*Using either STEPOSOL SB-D or STEPOSOL SB-W will produce differences in color and odor. STEPOSOL SB-D will produce a lightercolor and STEPOSOL SB-W will produce a lower odor.

    REGISTERED TRADEMARKS OF STEPAN COMPANYNINOLSTEPOSOL

    FOR ADDITIONAL ASSISTANCEFor applications or product handling assistance, call our TechnicalService Department at 1-800-745-7837 (U.S.) or 011-334-76-505-100(Europe).

    For ordering assistance, call our Customer Service Department at 1-800-457-7673.

    Nothing contained herein grants or extends a license, expressed or implied, in connection withpatents, issued or pending, of the manufacturer or others. The information contained herein isbased on the manufacturers own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the informationcontained herein. The manufacturer shall not be liable (regardless of fault) to the vendees employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

    Courtesy of:

    Stepan Company22 West Frontage Rd.Northfield, IL. 60093800-745-7837

  • Laundry Pre-Spotter WITH STEPOSOL SB-D

    This formulation can be used to pre-treat stains. It improves the removal of oily and particulate soil.

    FORMULATIONIngredients % by WeightSTEPOSOL SB-D 56.0BIO-SOFT N25-7 19.0BIO-SOFT N25-3 19.0Ethanol 4.0D.I. Water 2.0Total 100.00

    PROCEDUREMix ingredients in order listed with vigorous agitation.

    PHYSICAL PROPERTIESAppearance at 25C Clear, amber liquidpH, as is 8Viscosity at 25C, cps 12Density, lbs/gal 7.59Solids, % 94Flash Point, F (PMCC) 114

    STORAGE/STABILITY5 weeks at 25C (77F) Stable5 weeks at 4C (39F) Stable5 weeks at 40C (104F) Stable5 weeks at 50C (122F) StableFreeze/Thaw, 5 cycles Pass

    INSTRUCTIONS FOR USEDilution to 1:10 gives opaque liquid. Spray onto fabric directly with ahand pump-style sprayer, making sure to cover entire spot. Launder asusual.

    REGISTERED TRADEMARKS OF STEPAN COMPANYSTEPOSOLBIO-SOFT

  • FOR ADDITIONAL ASSISTANCEFor applications or product handling assistance, call our TechnicalService Department at 1-800-745-7837 (U.S.) or 011-334-76-505-100(Europe).

    For ordering assistance, call our Customer Service Department at 1-800-457-7673.

    Nothing contained herein grants or extends a license, expressed or implied, in connection withpatents, issued or pending, of the manufacturer or others. The information contained herein isbased on the manufacturers own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the informationcontained herein. The manufacturer shall not be liable (regardless of fault) to the vendees employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

    Courtesy of:

    Stepan Company22 West Frontage Rd.Northfield, IL. 60093800-745-7837

  • Concrete Cleanerwith STEPOSOL SC

    Removes soil from untreated concrete surfaces.

    FORMULATIONIngredients % by WeightSTEPOSOL SC 90.00BIO-SOFT EC-690 10.00Fragrance, if desired Q.S.Total 100.00

    PROCEDURECombine ingredients in any order and mix until homogeneous.

    PHYSICAL PROPERTIESAppearance at 25C Clear, yellow liquidpH, 5% in ethanol 6.1Viscosity at 25C, cps

  • FOR ADDITIONAL ASSISTANCE

    For applications or product handling assistance, call our TechnicalService Department at 1-800-745-7837 (U.S.) or 011-334-76-505-100(Europe).

    For ordering assistance, call our Customer Service Department at 1-800-457-7673.

    Nothing contained herein grants or extends a license, expressed or implied, in connection withpatents, issued or pending, of the manufacturer or others. The information contained herein isbased on the manufacturers own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the informationcontained herein. The man

Recommended

View more >