metalworking tools for marine, bridge, - cs unitec,...

2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com

Metalworking Tools for Marine, Bridge,Pipeline and Process Industries

CS Unitec's Trelawny™ line of surface preparation tools features many Vibro-Lo™ models.These models include integrated vibration reduction technology to operate with 7x lessvibration than standard models. Vibration damping components offset the hammer vibrationwhen the tool impacts the workpiece, reducing the risk of vibration-related injury.

Hand-Held Scaling Hammers (Pneumatic) p. 5

• Low-Vibration Single-Head and Triple-Head Scaling Hammers

• Remove thick scale, heavy corrosion, hard coatings and more

• Optional spark-resistant copper beryllium cutter heads

Low-Vibration Needle/Chisel Scalers (Pneumatic) p. 6-9

• Vibro-Lo™ Needle/Chisel Scalers remove coatings, corrosion and other accumulated materials

• Clean and stress-relieve weld seams and joints

• Variety of needles and chisels, including options for use in hazardous areas and Ex zones

Vibro-Lo™Vibration Reduction

Technology

Long-Reach Chisels / Scrapers / Scalers (Pneumatic) p. 10

• Available in lengths ranging from 2' to 6'; chip, scrape and descale with one tool

Surface Preparation Tools & Dust Collection Vacuums

Low-Vibration Steel Deck Hammer (Pneumatic) p. 11

• 11 heads and 33,000 blows per minute• Fracture and reduce scale, corrosion and thick coatings in minutes,

reducing blast media costs

• Ideal for ship decks, tank bottoms, bridge decks, floating platforms and more

Floor Scarifiers / Planers (Electric • Pneumatic • Gas) p. 12

• Ideal for the most demanding surface preparation and material removal applications

• Remove rust, scale, paint, adhesives and more from steel and concrete

Trident Neptune Flexible Shaft Deck Descalers (Air • Electric) p. 13

• Rapidly remove scale, rust, paint and other unwanted deposits on ship decks and othermetal surfaces

Hydraflex Hold Cleaning Gun Kit (Pneumatic) p. 14

• Reach up to 100 ft. away with high-pressure water jet

• Clean hold areas on bulk carriers and cargo vessels of all sizes

• Wet/Dry air-powered models collect dry dust/debris and non-flammable liquids

• ATEX classified, antistatic vacuum and air-supply hose; optional HEPA filter

• Electric-powered wet/dry models with HEPA filtration

Hand-Held Scarifiers – Rotopeen™ (Pneumatic • Electric) p. 4

Dust Collection Vacuums (Pneumatic • Electric) p. 15

• Ideal alternative to small-area shot blasting

• Clean and prepare steel and concrete surfaces

• Available with 3M's Rotopeen™ 'C' flaps, star cutters and beam cutters

Vibro-Lo™Vibration Reduction Technology



3• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Reaming, Drilling, Driving, Sawing & More

Reamers, Drills and Drive Motors (Air • Electric • Hydraulic) p. 16Bridge reaming and heavy-duty drilling applications in steel and other metals, as well as tube rolling, tube expanding, tapping, valve turning and more.

Portable Beveling Machines (Electric) p. 17Bevel, deburr and chamfer and prepare weld seams on plate and pipe. Portable machines for 30˚, 45˚ or 2.5 mm bevels, as well as 15˚ to 60˚ continuously adjustable angles.

Dry Cutting Circular Saws (Electric • Pneumatic) p. 18-19Fast, portable, burr-free cutting of metal plates, pipes and profiles. Models up to 14".

Portable Reciprocating Saws (Pneumatic • Hydraulic) p. 20-21Hand-held or clamp-on cutting in tough environments – fast cutting of pipe, structural steel, bolts, nails, pallets and other material.

AirPac Dryer / Cleaner • Hydraulic Power Unit p. 21Portable Band Saws (Air • Electric • Hydraulic) p. 22Fast, on-site cold cutting of pipe up to 8-1/2" diameter.

Power Hacksaws (Air • Electric • Hydraulic) p. 23Cold cutting of large pipe up to 30" diameter and structural steel – on site.

Chain Saws (Air • Hydraulic) p. 24Bar lengths of 10" to 25"; cut wood, plastic and more.

Underwater / Subsea Tools (Hydraulic • Pneumatic) p. 25Reduced Sparking Diamond Grinding & Cutting Discs p. 26Reduce sparks, dust and material waste when grinding and cutting steel, stainlesssteel, aluminum, titanium, fiberglass and more. Last 100x longer than resin bonded wheels.

Explosion-Proof Axial Fans and Air Movers (Air • Electric) p. 27Highly efficient units for ventilating, exhausting and cooling.

Non-Sparking and Non-Magnetic Safety Hand Tools p. 28-29For use in hazardous environments and all ATEX and Ex Zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present.

Portable Magnetic Drills (Electric • Pneumatic • Hydraulic) p. 30-33Fast, accurate hole cutting up to 5-1/8" dia., twist drilling up to 1-3/4" dia., tapping up to 1-5/8" dia. and more.

Linear Grinders and Pipe Sanders (Electric • Pneumatic) p. 34Grind flat surfaces and pipes up to 14" from coarse to shadow-free matte finish, up to a mirror polish. Remove welds, deep scratches, oxidation and rust.

HIPPO Mixing Station and Mixing Drills (Electric • Pneumatic) p. 35Mix, transport and pour with one unit. Hand-held units and portable stands also available.

WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does not apply tonormal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportationprepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.CS Unitec, Inc.'s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no other warrantiesexpressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repairor replacement as described above.

SafetyOperators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearing protection,gloves and more. Follow instructions included in operating manual.

CS Unitec's Trelawny™ Rotopeen™ hand-held scarifiersare the ideal alternative to small-area shot blasting forcleaning and preparing steel and concrete surfaces. They utilize 3M's brand of Rotopeen™ 'C' flaps to offer a captive shot method of surface preparation.

• Pneumatic and electric models

• Integrated dust shroud for dust and debriscollection, as well as cleaner, safer removal oflead-based paints and contaminated particles

Peening Preparation Tool (PPT) – idealalternative to small-area shot blasting

Pneumatic Hand-Held Scarifiers

194.0205

194.C205

194.0405

194.C405

30

30

30

30

2700

2700

2700

2700

3.5

6.0

3.1

4.6

ModelNumber

CFM @90 PSI

Speed(RPM)

2"

2"

4"

4"

CuttingWidth

'C' Flaps

Star Cutters

'C' Flaps

Star Cutters

These models are compatiblewith Star Cutters, Beam Cutters

and Rotopeen™ 'C' Flaps

CuttingMedia

7.5

11.5

9

13.25

Weight(lbs.)

VibrationLevels m/s2

Electric Hand-Held Scarifiers

195.1215

195.1220

110V

220V

2000

2000

3.6

3.6

ModelNumber Motor Power

Speed(RPM)

2"

2"

CuttingWidth

'C' Flaps

'C' Flaps

CuttingMedia

10

10

Weight(lbs.)

VibrationLevels m/s2

Applications include:• Aggressive removal of alkyds, adhesives,lead-based paints, mastics, coatingscorrosion and more• Cleaning and preparing steel andconcrete surfaces

Electric Model 195.1220 2" cutting width with Rotopeen™ 'C' flaps

Pneumatic Models 194.0405 and194.C405, 4" cutting width

See page 15 for dustextraction systems.


Hand-Held Scarifiers - Rotopeen™ Air • Electric

Star Cutter Beam Cutter 3M™ Rotopeen™ 'C' FlapP/N 312.S200 P/N 312.R200 P/N 312.MRPC

Hand-Held Scarifier Accessories

HEAVYSCALING

LIGHTBURNISHING

Nuclear

Ships decks

Construction

Factory Floors

Swimming Pools

Bridge Maintenance

Pipeline Maintenance

––––

Non-slip coatings

Plaster removal

––––

Adhesive removal

Sealant removal

––––

––––

––––

Ceiling / wall paint removal

Floor marking removal

Adhesive removal

––––

––––

Radioactive waste removal/capture

General paint removal

Ceiling / wall paint removal

Floor marking removal

––––

Paint / sealant removal

Protective coating removal

Aggressive removalof thick coatings

Removal of hard coatings, lessaggressive than star cutter

Removal of light paint and rust to bare metal finish

Star CutterCuttingWidth

2"4"

QuantityRequired

80160

Beam CutterCuttingWidth

2"4"

QuantityRequired

56112

Rotopeen™'C' Flap

CuttingWidth

2"4"

QuantityRequired

612

CS Unitec's Trelawny™ line of pneumatic hand-heldscaling hammers are ideal tools for the removal of thickscale, heavy corrosion and hard coatings. Areas ofapplication include pipes, ship decks, oil platforms,storage tanks and bridge structures.

• Single-head scaling hammer includes Vibro-Lo™ vibrationreduction technology

• Optional spark-resistant copper beryllium replacement headsreduce risk of explosion in potentially hazardous areas

• Detachable taper fit cutter head reduces cost of replacementand extends piston life

Remove thick scale, heavycorrosion and hard coatings

Applications Include:• Pipes• Ship Decks• Oil Platforms• Storage Tanks• Bridge Structures

Pneumatic Hand-Held Scaling Hammers

Cruciform


Technology


CS Unitec's Trelawny™ Single-HeadHand-Held scaler operates with 7x lessvibration than standard models. This toolutilizes vibration damping components tooffset the hammer vibration created whenthe head impacts the workpiece.

Pneumatic

Hand-Held Scaling Hammer AccessoriesPart No.

426.5351

606.5303

426.5352

612.5301

For Model Numbers

151.5100, 196.5095and 153.5300

151.5110 and 153.5310

151.5105 and 153.5305

All models shown below

TCT CruciformCutter Head

Copper Beryllium(CuBe) Cruciform Cutter Head

Bush Cutter Head

Common TaperedPiston

Vibro-Lo™


Low-VibrationSingle Head

Triple Head

TCT Cruciform Piston

Bush Hammer Piston

CuBe Cruciform Piston



Bush Hammer Piston

CuBe Cruciform Piston

151.5100

151.5105

151.5110

196.5095

153.5300

153.5305

153.5310

5.5

5.5

5.5

5.5

8

8

8

3000

3000

3000

3000

9000

9000

9000

7

7

7

7

7

7

7

88.1

88.1

88.1

88.1

88.1

88.1

88.1

6.8

6.8

6.8

3.7

13.4

13.4

13.4

19" x 6"

19" x 6"

19" x 6"

19" x 5.5"

19" x 6"

19" x 6"

19" x 6"

DescriptionModelModelNumber

Weight(lbs.)

Dimensions(LxH)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

SingleHead

Vibro-Lo™


Copper Berylliumfor use in potentiallyexplosive areas

H

H

H

Bush

VL223

VL203

CS Unitec's Trelawny™ line of Low-Vibration needle/chiselscalers offer high performance and low vibration forgreater productivity and improved operator comfort.Ergonomically designed with low maintenance and quickchange tooling option.

CS Unitec's Trelawny™ Vibro-Lo™ line of Needle/ChiselScalers operate with 7x lessvibration than standardmodels. These tools utilizevibration damping componentsto offset the hammer vibrationcreated when the needles/chiselsimpact the workpiece.

• Integrated Vibro-Lo™ vibration reduction technology

• Lightweight, easy to handle

• Optional dust shroud for dust and debris collection

• Tool-free needle changeover

• Converts to chisel scaler in seconds

High power with low vibration –equipped with Vibro-Lo™

Applications include:• Cleaning and stress-relieving weld seams and joints• Removing coatings, corrosion and other accumulated materials• Texturing concrete• Splitting, chipping, pointing and brick raking

VL303

Needle Scalers andChisel Scalers convert in

seconds with optionalhead or when purchased

as a Kit. See followingpage for Kit information.

6

Low-Vibration Needle/Chisel Scalers Vibro-Lo™Vibration Reduction

Technology

Dust CollectionShroud

CS Unitec's Vibro-Lo™ Needle/Chisel Scalers are a safer, more effectivemeans of removing coatings, corrosion and other accumulated materials.Vibro-Lo reduces the risk of vibration-related injury.

Chisel for light surface marking

Flat for light treatmentand polishing effect

Pointed for veryhard scale


Stainless Steel for usein applications wherecorrosion or humidity is aproblem, such as foodprocessing industry

See page 9 for thefollowing types ofneedles:

Chisels for Vibro-Lo™ Chisel Scalers

Dust Collection Shroud for Vibro-Lo™ Needle Scalers

Shank Length Width Application

Pistol

VL223 Needle Scaler

VL223 Needle Scalerwith dust shroud

Chisel Part Number

Square

SquareCranked End

Square

Square

Square

7"

7"

7"

7"

10"

2"

3/8"

3/4"

2-1/2"

3/4"

Spark resistant Aluminum Bronzefor use in hazardousareas

Weld flux and thick coating removal

Weld splatter removal

Wide flat chisel forthe removal of rustor peeling paint

Flat chisel for weldsplatter and sand cast cleaning

704.3110

704.3205

704.3101

704.3103

704.3107

DescriptionGripModelNumber

Needle Quantity/Diameter

Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model VL223 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL203 Needle Scaler – Order Dust Shroud P/N 418.2003Model VL303 Needle Scaler – Order Dust Shroud P/N 418.3003

VL223 Kit – Order P/N 199.2113VL203 Kit – Order P/N 199.2013VL303 Kit – Order P/N 199.3103

CS Unitec offers Vibro-Lo™ Needle/Chisel Scaler Kits, each supplied with the Needle Scaler, 3mm needles, a chisel holder, anvil and a 3/4" blade chisel.

Vibro-Lo™ Needle Scalers

Vibro-Lo™ Chisel Scalers Vibro-Lo™ Needle/Chisel Scaler Kits

CS Unitec offers a drop protection kit for our Vibro-Lo™ Needle/ Chisel Scalers. Protect your investment when working at heights or in applications where dropping/ losing the tool is likely, including: offshore platforms and rigs, bridges/ scaffolding, vessels and ships.

For VL223 and VL203Order P/N 720.2003*

For VL303Order P/N 720.3003** Safety clip and line not supplied

Drop Protection Kit

Inline

Pistol

VL223 Chisel Scaler

VL203 Chisel Scaler

VL303 Chisel Scaler

199.2213

199.2203

199.3203

6.5

7

9.5

2400

2400

3000

4

4

5.5

76.3

76.3

78.2

3.69

3.33

3.7


Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Inline

H

H

199.2103

139.2103

199.2003

139.2003

199.3003

139.3003

19 / 3mm

19 / 3mm

19 / 3mm

19 / 3mm

28 / 3mm

28 / 3mm

5.25

5.25

6

6

7.75

7.75

2400

2400

2400

2400

3000

3000

4

4

4

4

5.5

5.5

90.7

90.7

90.7

90.7

109.5

109.5

2.56

2.56

2.75

2.75

2.3

2.3

VL203 Needle Scaler


VL303 Needle Scaler


CS Unitecoffers a fullline of non-sparking,non-magneticchisels andsafety handtools forhazardousareas and Exzones.Contact usfor details.

See page 15 for dustextraction systems.



Technology

Low-Vibration Needle/Chisel Scalers


Standard Needle/Chisel Scalers

Chisel for light surface marking

Flat for light treatmentand polishing effect

Pointed for veryhard scale


Stainless Steel for usein applications wherecorrosion or humidity is a problem, such as the food processing industry

See page 9 forneedles:

Chisels for Standard Chisel Scalers1/2" Square Connection

Shank Length Width Application

Pistol

SemiPistol

1B Needle Scaler1B Chisel Scaler


Square

SquareCranked End

Square

Square

Square

Square

Square

7"

7"

7"

7"

10"

8"

7"

2"

3/8"

3/4"

2-1/2"

3/4"

1/4"

Moil Point

Spark-resistant Aluminum Bronzefor use in hazardous areas

Weld flux and thick coating removal

Weld splatter removal

Wide flat chisel for the removalof rust or peeling paint

Flat chisel for weld splatterand sand cast cleaning

Mortar removal for repointingbrick work

Concrete chipping

704.1110

704.2105

704.1101

704.1103

704.1107

704.1106

704.1112


Needle Qty./Dia.

Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Dust Collection Shroud for Standard Needle ScalersOptional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.Model 2B and 2BPG Needle Scalers – Order Dust Shroud P/N 418.2199Model 3BPG Needle Scaler – Order Dust Shroud P/N 418.3039

* 3BPG Chisel Scaler 135.3395 has 5/8" hexagonal chisel holder and is compatible with chisels shown on page 10. All others Chisel Scalers shown above have 1/2" square connection.

Standard Needle and Chisel Scalers

TVS™ Needle Scalers with Integrated Vacuum Shroud

Inline

H

H

12 / 3mmN/A

19 / 3mmN/A

3.53.3

5.754.4

38003800

30003000

3.03.0

5.55.5

110.498.9

113.398.6

8.58.2

9.317.4

123.2199125.2300

133.3199135.3300135.3395

19 / 3mmN/A

28 / 3mmN/AN/A

5.754.5

8.256.26.2

30003000

220022002200

5.55.5

8.08.08.0

113.398.6

114.5105.1105.1

12.622.4

18.925.625.6

131.3099134.3200

141.4099144.4200

28 / 3mmN/A

35 / 4mmN/A

107.5

12.58.2

22002200

18001800

8.08.0

8.58.5

114.5105.1

117.4105.1

2BPG Needle Scaler2BPG Chisel Scaler

3BPG Needle Scaler3BPG Chisel Scaler3BPG Chisel Scaler*



Pistol

2B Needle Scaler


Weight(lbs.)

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

Inline 139.2007 6.4 3000 5.5 98.6 17.4

139.2107

139.3107

6.6

9.9

3000

2200

5.5

8.0

98.6

105.1

22.4

19.9

2BPG Needle Scaler

3BPG Needle Scaler

CS Unitec's Trelawny™ TVS™ Needle Scalers with Integrated VacuumShroud enable dust-free working in hazardous applications when usedwith a dust extraction vacuum (see page 15 for dust collection systems).

Pistol Grip

Semi PistolGrip

Above: Model 1B Chisel Scalerwith Square Cranked End Chisel

for removal of flux

CS Unitec offers afull line of non-sparking, non-magnetic chiselsand safety handtools for hazardousareas and Exzones. Contact usfor details.

Standard Needle Scalers and ChiselScalers convert in seconds with optional

head or when purchased as a Kit.Contact us for more information.

111.1099114.1200

121.2099124.2200

Inline Grip

12.219.9

23.545.2

Chisel Part No.


Available in 3mm flat top only; for use in potentiallyhazardous areas.

Needles

Flat Tip

2mm

2mm

2mm

2mm

2mm

3mm

3mm

3mm

3mm

3mm

3mm

4mm

4mm

4mm

4mm

3mm

3mm

6 x sets of 29 needles



Box of 100 needles

Box of 2000 needles





Box of 100 needles

Box of 1000 needles (180mm long)



Box of 50 needles

Box of 500 needles

Box of 1000 needles 5" long (127mm)

19 x needles 5" long (127mm)

412.1129

412.1151

412.1165

452.1110

442.1107

413.1112

413.1119

413.1128

413.1149

453.1110

443.1107

414.1119

414.1135

454.1105

444.1107

443.1105

443.1115

Flat-tipped needles will reduce markingon metal surfaces and can give apolishing effect. For use on thin gaugemetals and any surface where a lighttreatment is required.2mm needles used on a welded joint produce a similareffect to shot peening, reducing stress in the weld.

Size Description Part #

Chisel Tip

3mm

3mm

3mm

3mm

3mm

3mmConversions:2mm = 0.08"

3mm = 0.12"

4mm = 0.16"

180mm = 7"





Box of 100 needles

Box of 1000 needles

413.2112

413.2119

413.2128

413.2149

453.2110

443.2107

These needles will clean the samematerials as a pointed tip, but will leavelight surface marking


Pointed Tip

3mm

3mm

3mm

3mm

3mm

3mm

4mm

4mm

4mm

4mm





Box of 100 needles

Box of 1000 needles



Box of 50 needles

Box of 500 needles

413.3112

413.3119

413.3128

413.3149

453.3110

443.3107

414.3119

414.3135

454.3105

444.3107

Sharpened to a conical point, these arethe most effective in breaking throughvery hard scale on materials where somesurface indentation is permissible - or where aroughening or keying of the surface is actuallydesirable.


3mm

3mm

3mm

3mm

3mm

3mm

Box of 12 needles

Box of 19 needles

Box of 28 needles

Box of 49 needles

Box of 100 needles

Box of 500 needles

403.1312

403.1319

403.1328

403.1349

453.1310

443.1307


Spark-Resistant Copper BerylliumH

Available in 3mm flat tip form only, to be used inapplications such as refurbishment of food processingmachinery or areas of high humidity where the corrosiveeffect on needles would be prohibitive.Used on decorative concrete surfaces where contamination of thesurface from carbon steel needle is undesirable.

3mm

3mm

Box of 100 needles

Box of 500 needles

453.1207443.1207


Stainless Steel

See page 15 fordust extractionsystems.

CS Unitec's Trelawny™ needles last 10x longer than standard needles. Save time and money with fewer needle changes and less downtime.

All of CS Unitec's Needle Scalers are delivered from stock complete with 180mm long x 3mm diameter chisel tipped high performance needles. Other needle holders are available as accessories for use with 2mm and 4mm diameter needles. We also offer spark resistant needles for use in potentially hazardous areas and Ex zones, as well as stainless steel needles for usein humid areas - such as applications in the food processing industry - where corrosion is a concern.

Standard pack set is one carton of 6 sets. Some models are packed as an individual set in a box.Boxes of 100 qty. needles in a durable, reusable plastic container are available, as well as largerquantities.

Long-Reach Chisels/Scrapers

StandardScalers

LITEScalers

2ft. Chisel4ft. Needle4ft. Chisel5ft. Chisel

4ft. Chisel5ft. Chisel6ft. Chisel

136.3299137.3499136.3499136.3599

136.3497136.3597136.3697

8111112

6.757.58.5

2200220022002200

220022002200

Model DescriptionModelNo.

Weight(lbs.)

4.54.54.54.5

4.54.54.5

841048486

898984

CFM@ 90PSI

Blows per

minute

Noise Leveldb(A)

Chisel Accessories

Needle Scaler Accessories

Scraper Accessories

• Ice• Residue• Adhesive• Asbestos• Linoleum• Carpeting• Plaster

• Mortar• Floor tiles• Metal slag• Rubber coatings• Roofing materials• Chemical spillages• Bituminous products

Applications include removal of:

CS Unitec’s Trelawny™ Long-Reach Scrapersfeature one tool with multiple applications.

• Available in 2', 4', 5' and 6' lengths• Three tools in one – chipper, scraper and descaler• Quick-change chisel release• Low air consumption• Standard and "LITE" models

Chip, scrape and descalewith one versatile tool

Chipping Scraping Descaling

705.1100

705.1101

705.1102

705.1106

705.1112

705.2102

708.1101

9"

9"

8"

9"

8"

8"

1"

2"

1"

4"

2"

4"

4"

1-1/8" comb insert

Spark-resistant aluminum bronzefor use in hazardous areas

Flat chisel for sand cast chipping

Asphalt cutter / paint removal /general chipping applications

Removal of linoleum from floor base

Spark resistant aluminum bronzefor use in hazardous areas

Floor tile removal

Brick cleaning and reclamation (usewith 8" long comb holder 708.1100)

ChiselPart No.

ChiselLength

Blade Width Applications

H

H

All long-reach scrapers are available as needlescalers by changing the scraper/chisel with theneedle attachment P/N 415.3532. See page 9for needles.

Flat

431.3504

431.3508

431.3512

Beveled

431.3904

431.3908

431.3912

439.3504(5 Blades)

439.3508(5 Blades)

439.3512(4 Blades)

439.3524(5 Blades)

439.3528(5 Blades)

439.3522(4 Blades)

Adhesive andpaint build up

removal

Paint andcoatingspillageremoval

Carpet andtile removal

Stubbornadhesiveremoval

Carpet andtile removal

Adhesiveremoval

4"

8"

12"

4"

8"

12"

ScraperAssemblyPart No.

BladePack

BladeWidth

Applications


Long-Reach Chisels/Scrapers/Scalers


Applications Include:• Ship Decks• Tank Bottoms• Bridge Decks• Floating Platforms

CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic Deck Hammer operates with 7x less vibration thanstandard models. This tool utilizes vibration dampingcomponents to offset the hammer vibration createdwhen the heads impact the workpiece.

SF11 Steel Deck Hammer

CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic DeckHammer will fracture and reduce scale, corrosion and thickcoatings in minutes. The machine's low profile body andadjustable handle mean the deck hammer needs only 6"clearance for working under pipes and other constructions.

• Includes Vibro-Lo™ vibration reduction technology

• Optional spark resistant beryllium copper replacement headsto reduce risk of explosion in potentially hazardous areas

• Detachable taper fit cutter head reduces cost of replacementand extends piston life

• Optional vacuum shroud reduces hazardous and nuisancedust when used with TVS approved dust collectors

11 heads deliver 33,000 BPM Fracture and reduce scale, corrosionand thick coatings in minutes – andreduce blast media costs

11 heads provide 33,000 BPM (11 x 3000 BPM)


Technology

SF11 AccessoriesPart No.

426.5351

606.5303

426.5352

612.5301

437.0100

Cruciform Cutter Head

Copper Beryllium (CuBe)Cruciform Cutter Head

Bush Cutter Head

Common Tapered Piston

Vacuum Shroud

Vibro-Lo™

Vibro-Lo™

Vibro-Lo™

ScaleForce Eleven (SF11) Pneumatic Deck Hammer

SF11 w/ CuBeHeads

SF11 w/ DustShroud

159.5910

159.5930

159.5912

ModelNumber

36

36

37.35

11.1" x 47.6"

11.1" x 47.6"

11.1" x 47.6"

Weight(lbs.)

Dimensions(WxH)

10"

10"

10"

70

70

70

113.1

113.1

113.1

5.76

5.76

5.76

33,000

33,000

33,000

CuttingWidth

Blows per

minuteCFM @90 PSI

Noise Leveldb(A)

VibrationLevelsm/s2

SF11 w/CruciformHeads

Copper Beryllium for use in potentially explosive areas H

H

Bush Cruciform Optional dust shroud,P/N 437.0100, tocollect dust and debriswhen connected to adust collectionvacuum.

See page 15 for air-powereddust collection vacuum – ATEXclassified for use in Gas Zone 2and Dust Zone 22.

• 1-800-700-5919 • Visit our Web site at www.csunitec.com12

Applications include:• Removal of rust, scale, paint, adhesives and more • Keyed or grooved profiles• Roughing concrete

CS Unitec's Trelawny™ Floor Planers tackle the most demandingsurface preparation and material removal applications. Ideal for theremoval of coatings and corrosion from steel and concrete surfacesto prepare for re-coating. Produce an ideal keyed or grooved profileon concrete for waterproofing and non-slip surface applications.

• Depth control maximizes performance and extends cutter life

• Integrated vacuum connection and hold-to-run handle

• Fully adjustable handlebar for operator comfort

• Electric, pneumatic or gas power

Remove rust, scale, paint, adhesivesand more from steel and concrete

Floor Scarifiers / Planers Electric • Pneumatic • Gas

TFP 200 Floor Scarifiers

320.2004T

320.2012T

14" x 35" x 35"1/8"

Model NumberWeight(lbs.)

220V - 240V, 3 HP 8"

CuttingWidth

Dimensions(WxLxH)

Max CuttingDepth per Pass

TFP 200 Electric

14" x 35" x 35"1/8"165CFM @ 90 PSI, 3.5 HP

Motor Specifications

8"

149

99

TFP 200 Pneumatic

320.2000T 14" x 35" x 35"1/8"Honda GX160 Gas, 5.5 HP 8" 130

TFP 200 Gas

TFP 200 Cutters IndividualCutter

N/A

320.5120

320.3658

320.5500

320.5600

320.5650

320.5500

DrumAssembly

320.9620

320.1020SB

320.1020SS

320.1020ST

320.1020SM

320.1020SM

320.1020G

Wire Brushes

Beam Cutters

Star Cutters

Tungsten Carbide Tipped Cutters

Milling Cutters (22mm)

Milling Cutters (11mm)

Tungsten Carbide Tipped Cutters(for grooving)

Cutter Applications:

Wire Brushes are ideal for finishcleaning and polishing on steel; canbe used for light concrete deposit.

Beam Cutters are ideal for lightpaint/corrosion removal, withminimal damage to substrate.

Star Cutters are ideal for theremoval of mastics and rubberizedcoatings.

Tungsten Carbide Tipped Cutters are ideal for aggressiveapplications such as roughing concrete and heavy corrosion removal,as well as grooving roadways for non-slip surface.

Milling Cutters are ideal for the removal of plastic road markingswithout penetrating the surface.

TFP 200Electric

TFP 200Pneumatic

TFP 200Gas

• 1-800-700-5919 • Visit our Web site at www.csunitec.com 13

Trident Neptune Flexible Shaft Deck Descalers

Applications Include:• Removal of scale, rust, paint and other deposits• Preparation of surfaces for priming, painting or coating

Standard equipment includes: 9' x 5/8" flexible shaft; heavy-duty leaf scaling head; 6-cutter scaling head; 6" dia. power brush, spanner set and hand guard.

Trident Neptune Deck Descaler Accessories

Trident Neptune Deck Descalers

Electricw/ Swivel Base

Electricw/ Skid Base

340.490/S

340.TN/50/S

340.TN/100/S

340.TN/S/110

340.TN/S/220

3000

2850

3450

2850

3450

75

75

75

106" x 8.3" x 11.4"

106" x 8.3" x 11.4"

106" x 8.3" x 11.4"

ModelModelNumber

55.077.00

55.077.00

55.077.00

55.077.00

55.077.00

ISSANumber

59 12 81

59 12 41

59 12 42

59 12 41

59 12 42

IMPANumber

68 CFM @ 90 PSI1.5 HP

110V / .75 HP

220V / .75 HP

110V / .75 HP

220V / .75 HP

MotorSpecifications

Weight(lbs.)

Dimensions(LxWxH)

CutterSpeed(RPM)

Pneumaticw/ Swivel Base

6-Cutter Scaling Head Part No: 340.581 ISSA: 55 082 01 IMPA: 59 12 86

Heavy Duty Scaling Head Part No: 340.550 ISSA: 55 078 01 IMPA: 59 12 75

Wire Brushes

Flexible Shaft with Handpiece and Coupling Part No: 340.285 ISSA: 55 077 01 IMPA: 59 12 99

Cutter WheelPart No: 340.332ISSA: 55 082 04IMPA: 59 12 89

ReplacementParts:

ReplacementParts:

Side Plates (2 qty.)Part No: 340.575/2ISSA: 55 082 02IMPA: 59 12 87

Cutter PinPart No: 340.583ISSA: 55 082 05IMPA: 59 12 90

Center BoltPart No: 340.581/AISSA: 55 082 03IMPA: 59 12 88

Chipping LeafPart No: 340.347ISSA: 55 078 06IMPA: 59 12 79

Side Plates (2 qty.)Part No: 340.551/2ISSA: 55 078 02IMPA: 59 12 76

Cutter PinPart No: 340.553ISSA: 55 078 05IMPA: 59 12 80

Center BoltPart No: 340.552ISSA: 55 078 03IMPA: 59 12 77

Spacing Washer (50 qty.)Part No: 340.5849/50ISSA: 55 078 04IMPA: 59 12 78

6" Power BrushPart No: 340.160ISSA: 55 084 03IMPA: 59 12 93


6" Twisted Knot BrushPart No: 340.163ISSA: 55 084 01IMPA: 59 12 91


Crimped Wire Cup BrushPart No: 340.166ISSA: 55 084 07IMPA: 59 12 97


Twisted Knot Cup BrushPart No: 340.167ISSA: 55 084 05IMPA: 59 12 95


CS Unitec's Trelawny™ Trident Neptune Deck Descaler is idealfor the rapid removal of scale, rust, paint and other unwanteddeposits on ship decks and other metal surfaces, leaving areceptive surface for priming/painting or coating application.

• Lightweight and portable

• 9' x 5/8" flexible shaft for wide coverage area

• Motor overheat protection on electric models

• Unique non-corrosive D-coupling with positive locking mechanism

• Two-skid base design keeps unit stable and upright; optional swivel base available

Ideal for rapidly removing scale, rust, paint and other unwanted deposits

• 1-800-700-5919 • Visit our Web site at www.csunitec.com14

Hydraflex Hold Cleaning Gun Kit

Specifically designed for hold cleaning on bulk carriersand cargo vessels of all sizes

The Hydraflex uses a combination of water and compressed air for a powerful,high-pressure jet of water that can reach up to 100 ft. away.

• One-man operation

• Constructed of high-quality, non-corrosivestainless-steel materials to prevent corrosion

• Adjustable air and water pressure control valve

Item Model Part No. ISSA No. IMPA No. Weight (lbs.)

1 Gun 342.HY01 55.085.01 59 07 42 12

2 Tripod 342.HY02 55.085.02 59 07 42 21

3 Water Hose Coupling 342.HY03 – – 4.3(2-1/2" x 2-1/2")

4 Water Hose Coupling 342.HY04 – – 0.75(2-1/2" x 2")

5 Instantaneous Water 342.HY05 – – 0.66Hose Adapter

6 Ball Valve 342.HY07 – – 3.10

7 Base Assembly 342.HY60A – – 14.4

Hydraflex Hold Cleaning Gun Accessories

1

2

6

7

Hydraflex Hold Cleaning Gun Kit

ModelModelNumber

ISSANumber

IMPANumber

70 CFM @ 90 PSI

70 CFM @ 90 PSI

342.HY50

342.HY50T

55.085.00

–

55 07 00

–

42

52

10-18kg

10-18kg

MotorSpecifications

Weight(lbs.)

85 psi

85 psi

WaterPressure

2"

2"

WaterHose

3/4"

3/4"

AirHose

Recoil

StandardKit withoutBase

(includes items1, 2, 3, 4 & 5)

CompleteKit withBase

(includes items1, 2, 5 & 6)

Model CS 1435 H(shown at left)

automatically"pulse" cleans filterswithout interruptingoperation!

• Antistatic vacuum and air supply hose

• ATEX classified* Ex II 2 GcT6 foruse in Gas Zone 2 and Dust Zone 22

• Robust stainless steel construction

• Floor tool kit for general cleaning work

• Double filtration with optional 14"Permaflow filter

• Optional HEPA filter – for collection of hazardous dust

• Disposable paper filter or reusablecloth bag for wet use

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Collection of dry dust/debris and non-flammable liquidsATEX classified; antistatic vacuum and air-supply hose

Air-Powered Dust Collection Vacuum – KAV 30 AIR

Optional Filter BagsPaper filter bags for CS 1225 and CS 1435 - P/N 416014 (5-pack)Plastic filter bags for CS 1225, CS 1435 and CS 1500 - P/N 421742 (5-pack)Paper filter bags for CS 1500 - P/N 416021 (5-pack)Slurry filter bags for CS 1500 - P/N 420592 (3-pack)

CS 1225 H

CS Unitec's wet/dry dust extraction vacuumsoffer strong 130 CFM air flow and an electromagnetic pulse filter cleaning system to maximize vacuum power and dust collection.

• Ideal for use with power tools• 99.999% HEPA filtration efficiency of particles

down to 0.3 microns; automatic filter cleaning • "Power Take Off" outlet activates the vacuum

ON/OFF from the power tool switch

• Non-HEPA models available, 99.930% filtration efficiency

• Kit available to connect two power tools (P/N 198804)

Electric-Powered Dust Collection Vacuums with HEPA Filtration

"Powertake-off"outlet

HEPA Vacuum SpecificationsCS 1225 H CS 1500 H

Power 11 Amp 11 Amp 11 Amp

Air flow 130 CFM 130 CFM 130 CFM

Tank capacity 6.6 gal. 13 gal. 6.6 gal.

Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.

Filter P/N (2pk.) 419190 419190 419190

CS 1435 H

KAV 30 AIR Vacuum SpecificationsDry Model

303.10KAV30/DWet/Dry Model

303.10KAV30/WD

CFM @ 90 PSI 35 35

Output flow 70 CFM 70 CFM

Tank capacity 6.8 gal. 6.8 gal.

Weight 32 lbs. 32 lbs.

Paper Filter P/N (10pk.) 303.1030 303.1030

HEPA Filter P/N 303.1060 303.1060

Standard Vacuum SpecificationsCS 1225 CS 1500

Power 11 Amp 11 Amp 11 Amp

Air flow 130 CFM 130 CFM 130 CFM

Tank capacity 6.6 gal. 13 gal. 6.6 gal.

Weight 24.3 lbs. 35.2 lbs. 24.3 lbs.

Filter P/N (2pk.) 416069 416069 416069

CS 1435

15

We make no claim that use of a vacuum will eliminate contaminants. Wear an approved respirator mask and follow all appropriate OSHA safety regulations forproper ventilation, dust handling, eye protection, etc. when using a dust extraction grinder and vacuum.

Dust Collection Vacuums Pneumatic • Electric

Optional Filters, Bags and Accessories for KAV 30 AIRAntistatic standard filter assembly (dry use w/paper filter or bag) - P/N 303.1025/ASPermaflow filter for secondary filtration - P/N 303.1035Antistatic float assembly for wet use - P/N 303.1050/ASDisposable, sealable paper bags for waste such as hazardous dust - P/N 303.1005 (10-pack)

KAV 30 AIR - Dry Model Part No. 303.10KAV30/DStandard equipment includes:Antistatic 38mm tool kit w/

dusting brush (P/N 303.1085/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)

The ATEX Directive 94/9/EC (ATEX Group-95) was established toprovide technical and quality objectives to control explosiveatmospheres, as well as the standards for equipment andprotective systems used in such areas. Recognized internationally,tools with ATEX classification provide safety assurances to usersthat the product was manufactured to high levels of safety.

Four ATEX classification elements are used to ensure equipmentis appropriate for its intended purpose and application.

For more information on these classification elements, as wellas the ATEX Directive and Ex zones, visit www.csunitec.com.

*ATEX Classified power tools ensure a high level ofsafety in Ex zones and hazardous atmospheres.

KAV 30 AIR - Wet/Dry Model Part No. 303.10KAV30/WDStandard equipment includes:Antistatic float assembly (P/N 303.1050/AS)Antistatic 38mm tool kit (P/N 303.1095/AS)Antistatic cloth filter (P/N 303.1025/AS)K6 paper filters (10pk.) (P/N 303.1030)

ModelEAU 34/4 CB

Reamers, Drills & Drive Motors Air • Electric • Hydraulic

AIRBridgeReamer

Bridge Reamers, CornerDrills and Drive Units

MT360-140 /200-470


16.3 Amp / 110V 1-1/4" 2" 92

Drilling(in steel)

Reaming(in steel)

TubeRolling

TorqueOutput(ft./lbs.) Arbor

LoadSpeed

Electric Motor for reaming, drilling and tapping – with torque control

Pneumatic Bridge Reamers / Corner Drills – ATEX Classified for Ex Zones

Hydraulic Bridge Reamer / Corner Drill

Electric Drive Units with reverse and variable speeds


14EHB 32/2.2 R/RL(reversible)

MT1MT2MT3MT4

500270260180

0.7 HP, 21 CFM @ 90 PSI1.8 HP, 49 CFM @ 90 PSI2.6 HP, 63 CFM @ 90 PSI3.0 HP, 63 CFM @ 90 PSI

5/8"7/8"

1-1/4"2-1/8"

1-1/4"

MT3

MT3MT3

MT3

220

30-230

80-570

50-420

3.8 HP, Oil Pressure2000 PSI, Oil Flow 4 GPM

16.3 Amp / 110V

20 Amp / 110 V

22 Amp / 110 V

1-1/4"

N/A

N/A

N/A

–

3"

60

174203

187

25

1519.5

20

2 1806 0010

ETE 32/2.3 R/RL

EAU 34/4*

EAU 36/4 with 4-speed gearbox and variable speed

* EAU 34/4 available with control box (on/off, reverse) – order Model No. EAU 34/4 CB

1"

N/A

N/A

N/A

1/2"5/8"1"2"

7355386

–––2"

7192537

2 1602 00302 1701 00302 1801 00302 2104 0030 (reversible)

Woodboring Air Drills – ReversibleHeavy-duty power for underwater drilling and other wood boring applications

750 RPM700 RPM380 RPM


2 HP, 39 CFM @ 90 PSI3 HP, 50 CFM @ 90 PSI3 HP, 50 CFM @ 90 PSI

1"2"3"

StubMT2MT2

Drilling(in wood) Spindle

FreeSpeed

Woodboring Drills – include 1/2" NPT threaded exhaust portMotor Specifications

14.524.7524.75

Optional Geared Drill Chuck

Part no. DE-99CPart no. IBC 22 (MT2)Part no. IBC 22 (MT2)

2 1903 00102 1924 00102 1932 0010

Model 2 1903 0010with lever throttleUp to 1" dia.

Model 2 1924 0010

with self-closingroll throttleUp to 2" dia.


Electric Bridge ReamerEHB 32/2.2 R/RL

ModelEAU 36/4

• Ideal for drilling wood in marine timbers, underwater use and railroad repair work

• 1/2" woodboring chuck style

• Thrust bearing support for long lifeand efficient operation

• Lever throttle and durable spur gearing

• Includes breast plate and dead handle

• Accessories include 1/2" to 1-1/2" dia. woodboring drill bits in lengths from 12" to 36"

Air, electric and hydraulic power for bridge reaming and heavy-duty drilling applications in steel and other metals, as well astube rolling, tube expanding, tapping, valve turning and more.

• Electric bridge reamers and drive units have high torque,two gears and variable-speed reversible motors

• Air and hydraulic bridge reamers include self-closing roll throttle and built-in oiler for motor

• Bevel 30˚, 45˚ or 2.5mm radius on steel, stainless,nonferrous metals, brass and plastics

• Deburr and chamfer; straighten edges, internal and externalradii; and countersink holes from 7/8" dia.

• Fine adjustment feature for slight chamfers whendeburring for the preparation of weld seams

• Ideal for: Boiler and process plant construction(prepare weld seams on heat exchangers); Mechanicalengineering (deburr machine parts, chamfer edges toprotect against paint peeling and create visible edges); Sheetmetal (deburr cut edges); Moldmaking (straighten edges,internal and external radii and countersink holes from 7/8" dia.)

30˚ 45˚ 2.5mm radius

One Machine, Three Milling Options

Milling cutter 30°,Chamfer 0 - 1/4"

Milling cutter 45°,Chamfer 0 - 1/4"

Milling cutter 2.5mm radius(0.098")

EKF300.3 EKF450.3 EKF452.3

Portable Beveling Machines

Bevel, deburr, chamfer and prepare weld seams fasterand cleaner than angle grinders

Fast, easy preparation ofweld seams and bevelson plate or pipe

EKF Multipurpose Beveling Machines

SKF Beveling Machinefor Plates and Pipes

Model No.Weight(lbs.)

CuttingSpeed

CuttingInsertsQty. Dimensions

Max.BevelWidth*

EKF Multipurpose Beveling Machines

SKF Beveling Machine for Plates and Pipes

Motor PowerBevelingAngle

30˚45˚

2.5mm (0.098")

15˚ - 60˚Continuously Adjustable

1/4"

3/4"

3000 SFPM

1800 SFPM

3 10.5

10 43

12-1/2" L x 5-1/2" Wx 11-5/8" H

16-1/2" L x 13" W

13.5 Amp/110 V13.5 Amp/110 V13.5 Amp/110 V

10 Amp/110 VSKF 25

15˚ - 60˚Continuously Adjustable

1-3/16" 1750 SFPM 6 11023-1/2" L x 24" Wx 20-1/2" H

10 Amp/110 VAutoCUT 500

* Max. bevel width may require several passes, depending on material hardness 220 V / 50 Hz also available

EKF 300.3EKF 450.3EKF 452.3


• Bevel 15˚ to 60˚ angles and land width up to 3/4" on steel, stainless steel, aluminum and nonferrous metal plates and pipe

• Work on welding angles and weld preparation onpipes/tubes with a minimum OD of 6-1/4" (160mm) withbuilt-in pipe roller guide; ideal for beveling pipe 6-1/4" ODand larger

• Robust design, single operator control and easy handling

• Anti-vibration system for operator comfort

Powerful, self-guiding bevelingmachine for 15˚ to 60˚ edges onplate up to 1.5" thick

AutoCUT 500 AutomaticEdge Processing Machine

SKF25

Three Models:EKF 300.3 - 30˚EKF 450.3 - 45˚EKF 452.3 - 2.5R

Also available:1.6mm / 0.063"cutting inserts(SHM 201).Contact us fordetails.

AutoCUT 500 Automatic Edge Processing Machine

• Bevel 15˚ to 60˚ anglesand land width up to1-3/16" on steel, stainless steel,aluminum and nonferrousmetal plates and pipe

• Unit propels itself on the plate, no need for a cart or stand

• Automatic feed and return

• Reversible carbidecutting inserts

AutoCUT500


• Largest portable dry metal cutting saw on the market• Dry cuts steel, sandwich panels, I-beams, trapezoidal sheets,

conduits, metal pipes and more – without coolant

• Side-mounted tilt tray for disposal of chips

• Motor protection with optical overload indicator

• Dust collection port

Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight

16 Amp/115V*12-5/8" (325mm) 4-3/4" (120mm)

1,400 RPM1"

608276 (12-5/8" dia.)80T

21 lbs.

Order No. 608270 U

* 230V also available – Order No. 608270

Super Hand-Held Accessory: Guide Railwith Clamping System - 2 x 23 5/8" Rails(P/N 608275 - shown at right)Ideal for straight cutting ofsandwich panels and sheets, guiderail and clamping system providessecure and jam-free guidance ofsaw blade through material. Railscan be used together for straightedge length up to 47" (1,200mm).

Dry Cutting Circular Saws – Electric

Fast, portable, burr-free cutting of metal plates,pipes, profiles and more… without coolantSuper Hand-Held Dry Cut Saw12-5/8" diameter, dry cut up to 4-3/4" depth

• Dry cuts tubes, profiles and more from steel,stainless, non-ferrous metal, plastic, composite and more – no coolant or deburring necessary

• Fine cuts in soft and sensitive materials• Adjustable saw head for miter cuts of -45˚ to +45˚• Secure clamping with 3-step quick-release system• Lightweight and portable at only 42 lbs.

10" Saw Blades for 9410 NDP/N 600598, 60T, for mild steelP/N 600654, 66T, for thin steel

90˚ Cut 45˚ CutRound 2.75" 2.36"

Square 2.75" 2.36"

Rectangular 3.9" x 2.75" 2.36" x 2.36"

9410 ND Max. Cutting Capacities

90˚ Cut 45˚ CutRound 5.5" 4.72"

Square 4.92" 3.15"

Rectangular 4.13" x 6.1" 2.95" x 3.93"

Model 9435 Max. Cutting Capacities

Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight

19 Amp/115V*14" (355mm)

6" at 90˚1,400 RPM

1"600570 (14" dia.)

90T55 lbs.

Order No. 608301


• Dry cuts stainless steel, ferrous and non-ferrousmetal, plastic and aluminum tubes, profiles andmore – no coolant or deburring necessary

• Exclusive blade stabilizing system reduces vibration• Powerful, high-torque motor for continuous operation• Patented quick-release vise for precise bevel cuts

14" Saw Blades for Model 9435P/N 600570, 90T, for stainless and thin steel P/N 600580, 72T, for stainless and medium steel P/N 600590, 60T, for stainless and thick steel P/N 600591, 60T, recommended for cast ironP/N 600595, 66T, recommended for mild steelP/N 600594, 96T, recommended for aluminumOptional stand available – Order No. 600526

Integrated dustcollection port

Dry Cut Miter Saw – 10" dia.Precise 45˚ cuts left and right

9435 Premium Super Dry Cut Saw (608301) standardequipment includes saw blade (P/N 600570).

8320 SHDC Super Hand-Held DryCut Saw (608270 U) standardequipment includes a carryingcase and saw blade (P/N 608276).

Premium Super Dry Cutter – 14" dia.6" max. depth of cut

LargestHand-heldDry-cuttingMetal Saw

9410 ND standard equipment includes a carryingcase and saw blade (P/N 600598).

Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Arbor SizeBlade Part No.Blade No. of TeethWeight of Saw and Stand

13 Amp/115V*10" (255mm)

4" at 90˚1,600 RPM

1"600598 (10" dia.)

60T42 lbs.

Order No. 608700



Dry Cutting Circular Saws – Pneumatic

• Dry cuts steel, non-ferrous metal, plastic, grating, composite and corrugated materials

• Cuts at 90˚ and 45˚ angles

• Ideal for foundries, petrochemical, marine,demolition and fabrication applications

• Cuts steel plate up to 3/4" thick

Motor PowerBlade DiameterMax. Depth of CutSpeed (Free)Air ConsumptionAir ConnectionVibrationWeight

2 HP9"

3-1/4" at 90˚ / 2-1/8" at 45˚1,700 RPM

60 CFM at 90 PSI1/2" NPT<2.5 m/s2

19 lbs.

Order No. 5 1115 0020

Standard blade .073"(1.85mm)thickness

Ultra-thin blade (P/N 722-23060).055" (1.4mm)thickness

Standard equipment includes an impact-resistantcarrying case and Ultra-thin LBS blade (P/N 722-23060). 9" Laser Beam Saw (LBS) ultra-thin

blade for all-purpose use features:

Part No.722-23060*

* Standard with Model 5 1115 0020Pneumatic Metal Saw.

Teeth

60

Thickness

.055"

Air power ideal for foundries, petrochemical, marine,demolition and fabrication applications

9" dia. Air Saw for 90˚ and 45˚ CutsDry cut up to 3-1/4" depth and 3/4" steel plate

• Thinner than conventional saw blades:LBS = .055" vs. Std. = .073" thickness• Shock-resistant, less vibration

• Produces 35% fewer chips

Dry Cutting TCT Saw Blades

• Heavy-duty air-powered circular saw,ideal for wet and dirty conditions

• Pneumatic power eliminates burn outfrom stalls

• Cuts up to 2-1/2" depth at 90˚ and 1-1/2" depth at 45˚

• 7-1/2" max. blade capacity

• D-handle design with inside trigger and safety lock button to preventaccidental starting

Motor PowerBlade Diameter*Max. Depth of CutSpeed (Free)Air ConsumptionAir ConnectionVibrationLengthWeight

1.7 HP (1.3 kW)7-1/2" (190mm)

2-1/2" at 90˚ / 1-1/2" at 45˚3,200 RPM

53 CFM at 90 PSI1/2" NPT<2.5 m/s2

13-1/2"19 lbs.

Order No. 5 1116 0020

7-1/2" dia. Heavy-Duty Air SawDry cut up to 2-1/2" depth at 90˚ and 1-1/3" at 45˚

9" diameter(1" arbor)

1.7 HP Air Motor

2 HPAir

Motor

Cermet-Tipped Dry Cutting Saw Blades7-1/2" (190mm) dia., .073" thickfor Model 5 1116 0020P/N 719240, 40T, for standard useP/N 719248, 48T, for thin platesP/N 719248A*, 48T, for aluminumP/N 719270, 70T, for sheet metal

* P/N 719248A is a Tungsten Carbide-Tipped (TCT) blade.

Tungsten Carbide-Tipped Dry Cutting Blades9" dia., .073" thick – for Model 5 1115 0020

P/N 721-23048, 48T, for standard useP/N 721-23060, 60T, for aluminumP/N 721-23068, 68T, for thin-wall metalP/N 721-23084, 84T, for sheet metal

Standard equipment includes rip fence andblade wrench. Blade not included.

* The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades.

90˚

Portable Reciprocating Saws Air • Hydraulic


5 1217 0020

5 6005 0010

15-7/8"1-1/8"

ModelNumber

Weight(lbs.)

1.3 HP, 46CFM @ 90 PSI 0-1800 1/2" NPT (ID)

Strokesper Minute Connection Length

Stroke Length

The CAT – Pneumatic

17-3/4"1-1/8"1.6 HP, 51CFM @ 90 PSI


0-2200 1/2" NPT (ID)

9

10.75

The WOLF – Pneumatic

5 1219 0010 1700 M 18 x 1.5Female

13.2

The SHARK – Hydraulic

1.6 HP, Cuts steel pipe and channel1/2" to 6" dia., plastic pipe to 8" dia.

2 HP, cuts pipe up to 6" dia., wood upto 8" dia., metal plate up to 3/4" dia.

The CAT Model 5 1217 0020

AIR ATEX ClassifiedATEX Classified

The WOLF Model 5 6005 0010

AIR

The SHARK Model 5 1219 0010

HYDRAULIC

• Fast cutting of pipe, structural steel, bolts, nails, pallets and other material

• The best power-to-weight ratios in the industry; compact size for cutting in confined spaces

• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts

1.3 HP, Cuts steel pipe and channel1/2" to 4" dia., plastic pipe to 8" dia.

Hand-held or clamp-on cutting in tough environmentsIdeal for a wide range of industries, including subsea, gas utilities, offshore oil,petrochemical, power generation, industrial plant maintenance and construction

2 HP, Oil Pressure 2000 PSI, Oil Flow 6 GPM (up to 13 GPM)

Low Vibration/Low Air Volume – Compact, Quiet & ReliableCut Pipe, Structural Steel, Sheet Metal, Fiberglass, Plastic and More

Outside

Outside

Outside

1 HP

1 HP

1 HP

5.25

5.5

5.5

7/8"

1-3/4"

1-3/4"

4

5.75

5.75

69

83

83

1.73

3.69

3.69

113/4" x 51/4" x 15/8"

153/4" x 51/4" x 15/8"

153/4" x 51/4" x 15/8"

TriggerModel No.MotorPower

Weight(lbs.)

Dimensions (LxHxW)

Stroke Length

2000

1200

1200

Strokes per

minuteCFM @90 PSI

1/2" NPT ID

1/2" NPT ID

1/2" NPT ID

Noise Leveldb(A)Connection

VibrationLevelsm/s2

PL905

CL50

CL75

PL Series CL Series

ATEX ClassifiedATEX Classified

Optional inside trigger*for hand-held use only.Add FT to Model No.

Workhorses for use in the fabrication, shipbuilding, ship repair, oil and petrochemical,boat building and aircraft maintenance fields, as well as by fire and rescue professionals

• Piston air motors use low air volume while maintaining a cutting speed of1200 to 2000 strokes per minute

• For use in hazardous areas and around gas and other flammable materials• Heavy-duty cast steel and aluminum saw bodies; built-in motor lubrication• Safety STOP/Isolator button disconnects air supply• Variety of Cengar Air Saw blades available

Reciprocating Saw Blades & Accessories

21

Heavy-duty Blades – These blades are much thicker than standard blades and havea stronger double-tang mount for heavy-duty cutting, either free-hand or with a clamp.

Super quick and precise for pipe, steel, plastic, etc.

No. 1001

No. 1002

No. 007D/200*

Cuts pipe up to 2"

Cuts pipe up to 4"

Cuts pipe up to 4"

8 TPI

8 TPI

M-Tooth

6" L x 1" W x .060" T

8" L x 1" W x .060" T

8" L x 1" W x .050" T

Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*

No. 007/150

No. 007/200

No. 007/280

Metal 1/8" and ThickerM-Tooth

M-Tooth

M-Tooth

6" L x 3/4" W x .035" T

8" L x 3/4" W x .035" T

12" L x 3/4" W x .035" T

No. 006/150

No. 006/250

Metal up to 1/8" ThickM-Tooth

M-Tooth

6" L x 3/4" W x .035" T

8" L x 3/4" W x .035" T

No. 1005

No. 1003

No. 1004

10/14 TPI

10/14 TPI

10/14 TPI

6" L x 1" W x .035" T

8" L x 1" W x .035" T

12" L x 1" W x .035" T

Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank

Made of tough, resilient steel with 10/14 variable toothpitch. Large blade width and double-shank mountdeliver excellent cutting performance and durability.

Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank

Cengar Air Saw Blades

CUTS 2x FASTER THAN ORDINARY BLADES! M42 Bi-metal for cutting steel and stainless steelThe teeth of the Patented M-Tooth Sawblade cut on the forward and back strokes, saving time.

Cuts inBoth Directions!

* 007D/200 has universal 1/2" tang

Ask for special blades to cut stainless steel.

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

HB300/18

HB300/24

HB300/32

MC220/18

MC220/24

MYN150/18

MYT150/18

Hand

Hand

Hand

Machine

Machine

Notched Yellow

Tapered Yellow

18 TPI

24 TPI

32 TPI

18 TPI

24 TPI

18 TPI

18 TPI

12" L

12" L

12" L

83/4" L

83/4" L

6" L

6" L

1/2" Wide Bi-metal Blades (CL50 / PL905)

MB150/18

MB200/10-14

MB200/18

MB200/24

MB250/18

MB250/24

MB300/10-14

MB300/18

Machine

Machine

Machine

Machine

Machine

Machine

Machine

Machine

18 TPI

10/14 TPI

18 TPI

24 TPI

18 TPI

24 TPI

10/14 TPI

18 TPI

6" L

8" L

8" L

8" L

10" L

10" L

12" L

12" L

3/4" Wide Bi-metal Blades (CL75)

• Removes moisture and dirtfrom air lines; a float valveautomatically ejects waterand dirt

• Includes automatic oiler; protects tools from freezing in cold environments

• Eliminates air motordowntime caused by waterand dirt

• Connections for two tools,max. air flow 185 CFM

Model CSAP-2

AirPac Dryer/Cleaner

• Ideal for use with ourhydraulic power tools.

• Delivers 5 GPM or 8 GPM at 2000 PSI

• Easy to move with liftand latch handle

• Weighs 330 lbs.

Model CSP-95

Hydraulic Power Unit

Air Tool LubricantProLube-ATL - P/N CS 7043-001 (gallon)

Air Tool Lubricant with Anti-FreezeProLube-ATL/AF - P/N CS 7049-001 (gallon)

Air Tool Line Conditioner/CleanerFor use in underwater air tools – displacesmoisture and inhibits rust and corrosion ofair motors - P/N MS 9105 (quart)


Portable Band Saws Air • Electric • Hydraulic

Fast, on-site cutting of pipe up to 8-1/2" diameterCold cutting saws for a wide range of industries, including refineries, chemicalplants, utilities, construction, offshore oil, mining, marine and demolition

• Fast, deep, cold cutting of pipe,conduit, bolts, cable, angle iron,structural steel, chain and more

• Cut steel, stainless steel, Inconel,chrome, Hastelloy, aluminum,copper, iron, fiberglass, plastics,wood and more

5 6003 0010

5 6031 0010

5 6062 0010

90 PSI @ 20 CFM

90 PSI @ 43 CFM

90 PSI @ 43 CFM

Motor Power and Specs.

1/4" NPT

1/2" NPT

1/2" NPT

AirConnection

(ID)

14

8

35

Wgt.(lbs.)

3/8"

1/2"

1/2"

AirHose

Model No.

43/4" OD / 41/2" x 43/4"

5 6031 0010

7" OD / 7" x 7"

81/2" OD / 9" x 8"

CuttingCapacity

43/4" OD / 41/2" x 43/4"

5 6031 0010

7" OD / 7" x 7"

81/2" OD / 9" x 8"

CuttingCapacity

43/4" OD / 41/2" x 43/4"

5 6031 0010

7" OD / 7" x 7"

81/2" OD / 9" x 8"

CuttingCapacity

Deep Throat™ AirBand – Stainless Steel housing

Wide Mouth™ AirBand – Stainless Steel housing

Standard AirBand™ – Aluminum housing

5 6046 0010

5 6040 0010

5 6079 0020

14

28

34

Wgt.(lbs.)Model No.

Deep Throat™ – Stainless Steel housing

Wide Mouth™ – Stainless Steel housing

Standard – Aluminum housing

Pneumatic Band Saws

Electric Band Saws Hydraulic Band Saws

Standard:Cut 4 3/4" round or 4 1/2" x 4 3/4"

Deep Throat™:Cut 7" round or 7" x 7"

Wide Mouth™:Cut 8 1/2" round or 9" x 8"


Pneumatic AirBand™ Saws

6 Amp, 110VAC 1.6 HP; Oil Flow: 4 GPM @ 2000 PSI1/2" FF (HTMA) Couplings

5 6043 0010

5 6041 0010

5 6054 0010

23

28

35.6

Wgt.(lbs.)Model No.

Deep Throat™ – Stainless Steel housing

Wide Mouth™ – Stainless Steel housing

Standard – Stainless Steel housing






Hydraulic Band Saws No. 9 2506 0010

No. 9 2506 0020

No. 9 2506 0030

No. 9 2506 0040

Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)

18 TPI

14 TPI

10/14 TPI*

8/12 TPI*

Cuts material 1/8" - 1/4" thick



Cuts material 1/2" and thicker

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

No. 9 2506 0220

No. 9 2506 0230

No. 9 2506 0240

No. 9 2506 0200

14 TPI

10/14 TPI*

8/12 TPI*

8 TPI





66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)

66"

447/8"

No. 9 2506 0350

No. 9 2506 0340

No. 9 2506 0330

10/14 TPI*

8/12 TPI

6/10 TPI




71" L x 5/8" W x .025" T

71" L x 5/8" W x .025" T

71" L x 5/8" W x .025" T

Blades for Wide Mouth™ saws (Model Nos. 5 6062 0010, 5 6099 0020 and 5 6054 0010)

71"

M42 Cobalt Steel SuperBand™ Saw Blades

Electric Band Saws

9"Cutting Capacity


Model 5 1212 0050

AIR


Model 5 1215 0070

ELECTRIC

• Cold cutting of large pipe, structural steel, tanks, profiles and more

• Compact size for cutting in confined spaces

• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts

Hacksaw Accessories

5 1207 99105 1202 99605 1207 8910 5 1207 89705 1208 9980

5 1208 9990

Model No. Cutting Dia. Clamp Type

2" to 6"4" to 123/4"*Up to 21"

215/8" x 113/8"Up to 123/4"*

Up to 123/4"*

Pipe ClampPipe ClampBlade GuideProfile Clamp

Automatic - Self-feedingClamp (for pneumatic saws)

Automatic - Self-feeding (forelectric and hydraulic saws)

* Cut up to 30" OD with two extension chains (order 2x P/N 5 1201 9030)

Hacksaw Blades – 8" to 37" length Hacksaw Clamps and Guide

Z22-9 HSSZ22-10 HSSZ22-11 HSS

Z22-6 HSSZ22-6 HSS-SL*Z22-31 HSS

Z22-7 HSSZ22-29 HSSZ22-33 HSS

Z22-72 HSS

Z22-30 HSSZ22-30 HSS-SL*

Z22-73 HSSZ22-74 HSS

Z22-75 HSSZ22-75 HSS-SL*

Z22-37 HSS

Order No. MaterialMax.Dia.of CutLength Teeth/

InchThick-ness

8"8"8"

12"12"12"

16"16"16"

20"

21"21"

24"24"

30"30"

37"

81624

161612

1686

14

1212

148

1212

12

Steel/Alum.Steel

Sheet Metal

SteelStainless Steel

Steel

SteelSteel/Alum.Cast Iron

Steel


SteelSteel/Alum.


Steel

1/16" 1/16"1/16"1/16"1/16"1/16"1/16"1/16"1/16"5/64"1/16"1/16"5/64"5/64"5/64"5/64"5/64"

31/8" 31/8" 31/8"

65/8" 65/8"65/8"

105/8"105/8"105/8"

145/8"

155/8"155/8"

181/2"181/2"

247/8"247/8"

317/8"

Dimensions

* Use HSS-SL Blades for best cutting performance on stainless steel andhard metal. Blades for plastic, wood and masonry also available.

Cold cutting of large pipe up to 30" diameter and structural steel – on siteIdeal for a wide range of industries, including refineries, chemical plants,utilities, construction, offshore oil, mining, marine and demolition

5 1212 00105 1212 0050

5 1215 0070

1/2"1/2"

RollLever

ModelNumber

Weight(lbs.)

Air Consumption: 51 CFMAir Pressure: 90 PSI

100-350100-350

23/8"23/8"

Strokesper Min.

BladeStroke HoseThrottle

Pneumatic – 3/4" ID NPT Air Connection

CableTrigger 110V/60 Hz


200-400 23/8"

15.415.4

13

Electric – 11 Amps / 110 Volt (Also available as 220 Volt/50 Hz)

5 1220 0050 1/2" IDLever

1.5 HP1.5 HP

Power

1.5 HP

3.8 HP 100-500 23/8" 13.5

Hydraulic – 1/2" FF (HTMA) Couplings

Oil Flow: 4 GPM at 2000 PSI

Power Hacksaws Air • Electric • Hydraulic

Model 5 1220 0050

HYDRAULIC

Model 5 1202 9960Pipe Clamp for 4" to 12 3/4" dia.*

Model 5 1208 9980 Self-feeding Pipe Clampfor up to 12 3/4" dia. pneumatic saws*

Model 5 1208 9990 Self-feeding Pipe Clamp forup to 12 3/4" dia. electric and hydraulic saws*

Chain Saws Pneumatic • Hydraulic

5/8"5/8"

21"25"

ModelNumber

Weight(lbs.)

4 HP, 92 CFM @ 90 PSI4 HP, 92 CFM @ 90 PSI

37"41"

3/4" NPT (ID)3/4" NPT (ID)

Lengthwith Bar

AirConnection Hose ID

CuttingCapacity

5 1008 Series – Underwater Air Chain Saw with Chain Guard (15", 17", 21" and 25" bar lengths available)

5 1026 Series – Cutting Wood, with Brake (17", 21" and 25" bar lengths available)


2931

Series 5 1008

Saws available with 10", 15", 17" , 21" and 25" bar lengths• Pneumatic power is safer than gas or electric in hazardous atmospheres

and wet environments, including underwater applications• Low maintenance and easy startup – saw chain and motor are

automatically oiled by two separate lubricating systems

• Powerful 4 HP motors at 90 PSI air pressure, 92 CFM

• Standard with .404 pitch Super Chisel saw chain

• Optional carbide-tipped and ripping saw chain available

Includes exhaustvalve and chainguard to protectoperator.

Series 5 1026, 5 1027 & 5 1028

Includes chain brake to stop chain during kickback or for repositioning saw during cutting.


5 1008 00305 1008 0040

5/8"17"4 HP, 92 CFM @ 90 PSI 33" 3/4" NPT (ID) 255 1026 0010

5 1027 Series – Cutting Plastic, with Brake and Water Feed System (17", 21" and 25" bar lengths available)

5/8"21"4 HP, 92 CFM @ 90 PSI 37" 3/4" NPT (ID) 285 1027 0020

5/8"5/8"

17"25"

4 HP, 92 CFM @ 90 PSI4 HP, 92 CFM @ 90 PSI

33"41"

3/4" NPT (ID)3/4" NPT (ID)

5 1007 Series – General Use Air Chain Saw with Chain Guard (15", 17", 21" and 25" bar lengths available)

2531

5 1007 00105 1007 0040

5 1028 Series – Underwater Air Chain Saw with Brake (17", 21" and 25" bar lengths available)

5/8"25"4 HP, 92 CFM @ 90 PSI 41" 3/4" NPT (ID) 315 1028 0040

Pneumatic Chain Saws – Powerful, efficient cutting of wood and plasticUsed successfully for many years in petrochemical industries, marine applications, utilities, underground mines and polyethylene plants

Hydraulic Pistol Grip Chain SawsIdeal for use in utilities, subsea, mines,construction and agriculture

Model ACH000-12 Pistol Grip Saw Motor Power Up to 6.5 HP Oil Flow: 3-8 GPM @ 2000 PSI

Handle Pistol Grip

Overall Length 23" (with bar)

Bar Length 12" (14" and 16" optional)

Weight 5.8 lbs.

Hose Connection 3/8" JIC 37˚

For 14" bar, order no. ACH000-14For 16" bar, order no. ACH000-16


Series 5 1007

5 1005 Series – Utility Air Chain Saw - Compact, Lightweight and Powerful

3/8"10"1.2 HP, 30 CFM @ 90 PSI 21" 1/4" NPT (ID) 5.45 1005 0010

• Up to 6.5 HP, high-torque gear motor

• Open/closed hydraulic system

• 12", 14" and 16" bar lengths available

• Pistol grip with safety trigger lock andinsulated handle

• Optional hose swivel to eliminatetangled hoses (at left - P/N 640080)

Hydraulic- and pneumatic-poweredtools for use in subsea applications

1 1580 0060 Underwater Hydraulic Horizontal Grinder, 1.3HP, 6400 RPM, Twist throttle,straight grinding wheels

1 1585 0010 Underwater Hydraulic Angle Grinder, 1.3HP, 3600 RPM, Lever throttle,grinding wheels up to 7"

2 2404 0030 Underwater Air Rotary Hammer Drill, SDS Plus, 1" cap. in concrete, 0-3000 BPM, .5 HP, 90 PSI / 21 CFM

2 2417 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete, 0-2500 BPM, 1.2 HP, 90 PSI / 21 CFM

2 2406 0010 Underwater Hydraulic Rotary Hammer Drill, SDS Plus, 1" cap. in concrete, 0-3400 BPM, .8 HP

2 2418 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete, 2500 BPM, 1.75 HP

2 1317 0030 Underwater Hydraulic Core Drill, 3" max. dia., 3.6 HP, 380/900/1800 RPM

2 1335 0010 Underwater Pneumatic Core Drill, 3" max. dia., 3.8 HP, 300/700/1350 RPM

Other Underwater Tools Available:Woodboring Drills - Pneumatic See page 16

Reciprocating Saws - Hydraulic and Air See page 20

Hacksaws - Hydraulic See page 23

Chain Saws - Air and Hydraulic See page 24

Portable Magnetic Drills - Hydraulic See page 30

Grinders - Hydraulic

Rotary Hammer Drills - Hydraulic and Pneumatic

Core Drills - Hydraulic and Pneumatic

Impact Wrenches - Hydraulic and Pneumatic6 1316 0070 3/4" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,

995 ft-lbs. torque

6 1316 0060 1" Air Impact Wrench, 1-1/8" (M 30) max. bolt size, 995 ft-lbs. torque

6 1515 0010 3/4" Hydraulic Impact Wrench, 1" (M 27) max. bolt size, 1220 ft-lbs. torque

6 1520 0010 1" Hydraulic Impact Wrench, 1-3/8" (M 36) max. bolt size, 1840 ft-lbs. torque

ATEXATEX

Underwater Tools Hydraulic • Pneumatic


Caution: User must follow all appropriate safetyregulations when choosing a tool for their particularworking environment.

Reduced Sparking Diamond Grinding & Cutting Discs


• Last 100x longer than ordinary resin bonded wheels

• Reduce sparks, dust and material waste

• Save time changing discs

Ideal for grinding and cutting steel, stainless steel, aluminum,titanium, fiberglass and other materials

EB Cut Off Wheels – "Slicer" for cutting metal and moreEco Brazing (EB) diamond cutting wheels from CS Unitec are designed for cutting steeland stainless steel pipe, tubing, bolts and plate, as well as composites, fiberglass andother materials.

EBC4007850C 4" x 7/8" 50 13,000 RPM 1 discEBC4507830C 4-1/2" x 7/8" 30 13,000 RPM 1 disc EBC4507850C 4-1/2" x 7/8" 50 13,000 RPM 1 discEBC5007850C 5" x 7/8" 50 13,000 RPM 1 disc

EBC6007830C 6" x 7/8" 30 8500 RPM 1 discEBC6007850C 6" x 7/8" 50 8500 RPM 1 discEBC7007850C 7" x 7/8" 50 8500 RPM 1 discEBC9007850C 9" x 7/8" 50 8500 RPM 1 disc

EB4007835CM 4" x 7/8" 35 13,000 RPM 1 discEB4007850CM 4" x 7/8" 50 13,000 RPM 1 discEB4507835CM 4-1/2" x 7/8" 35 13,000 RPM 1 discEB4507850CM 4-1/2" x 7/8" 50 13,000 RPM 1 discEB5007835CM 5" x 7/8" 35 13,000 RPM 1 discEB5007850CM 5" x 7/8" 50 13,000 RPM 1 disc

EB7007835CM 7" x 7/8" 35 8500 RPM 1 discEB7007850CM 7" x 7/8" 50 8500 RPM 1 disc

EB Combination (Grinding – Cutter) WheelsEco Brazing (EB) diamond combination metal grinding and cutting wheels from CSUnitec are designed for grinding and cutting steel and stainless steel bolts and plate.

EB4007880CLSF 4" x 7/8" 80 13,000 RPM 1 discEB4507880CLSF 4-1/2" x 7/8" 80 13,000 RPM 1 discEB5007880CLSF 5" x 7/8" 80 13,000 RPM 1 disc

EB6007880CLSF 6" x 7/8" 80 8500 RPM 1 discEB7007880CLSF 7" x 7/8" 80 8500 RPM 1 disc

EB Cluster (Cleaning – Grinding) WheelsEco Brazing (EB) diamond cluster wheels from CS Unitec are designed for removingpaint, rust and epoxy on metal. Also for high material removal on fiberglass, compositesand plastics without loading up like traditional abrasives.

Order No. Size (dia. x arbor) Grit Max. Speed Quantity



Caution: User must follow all appropriate safetyregulations when choosing a tool for theirparticular working environment.

Follow all appropriate safety regulations (ATEX,OSHA, ANSI, etc.) for all grinding applications,including those for working in hazardousenvironments. Follow all appropriate OSHA andinternational safety regulations for grinding metal,fiberglass, hard plastics and more.

Axial Fans and Air Movers Pneumatic • Electric


Highly efficient, explosion-proof unitsfor ventilating, exhausting and cooling

Explosion ProofFor use in Ex Zones and

Hazardous Environments.Electric fan motors areintrinsically safe, Ex.

8 1020 SeriesElectric Axial Fans withprotective grille on inletside, 2118 cfm output

Optional Axial Fan Accessories include:Mounting Flanges for fitting fans to flanged pipes for suction or discharge (shown at right)Protective Grilles for use on non-ducted fansAntistatic Items including Connectors, Quick-Seal Couplings and Plastic DuctingContact CS Unitec for more information.

8 1524 030024" dia. Pneumatic Axial Fan, 12,353 cfm output @ 90 psi

W70 6" dia. Pneumatic Air Mover3000 cfm output @ 90 psi

Explosion-Proof Axial FansPneumatic and Electric12" to 24" diameter

Caution: User must follow allappropriate safety regulationswhen choosing a tool for theirparticular working environment.

Explosion-Proof Pneumatic Axial Fans and Air Movers

8 1521 0300 Axial Fan 12" Pneumatic 3240 cfm 90 psi 48.5 lbs 1018 1522 0300 Axial Fan 16" Pneumatic 5720 cfm 90 psi 70.4 lbs 928 1523 0300 Axial Fan 20" Pneumatic 9170 cfm 90 psi 101.2 lbs 908 1524 0300 Axial Fan 24" Pneumatic 12,353 cfm 90 psi 127.6 lbs 868 1603 0300 Axial Fan 12" Pneumatic 2119 cfm 90 psi 28.6 lbs 85

W40 Air Mover 4" Pneumatic 1140 cfm 90 psi 11 lbs 91W70 Air Mover 6" Pneumatic 3000 cfm 90 psi 22 lbs 91 8 1620 0010 Air Mover 7" Pneumatic 2366 cfm 90 psi 8 lbs 104

8 1020 0140 Axial Fan 12" 230/400 V 50Hz 3-phase 2118 cfm 44 lbs 86 Ex II 2 GcT38 1020 0840 Axial Fan 12" 110 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0850* Axial Fan 12" 110 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0860* Axial Fan 12" 110 V 50/60 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT38 1020 0870 Axial Fan 12" 230 V 50 Hz single phase 2118 cfm 45 lbs 85 Ex II 2 GcT3

* with switch and cable

Order No. Description Diameter Power Volume Output Air Pressure Weight dBA

Explosion-Proof Electric Axial FansOrder No. Description Diameter Power Volume Output Weight dBA ATEX Class

Ideal for ship holds, underground mining, shipyards, refineries,petrochemical plants, oil platforms, power plants, tunneling,construction and more.

8 1620 00107" dia. Pneumatic Air Mover,2366 cfm output @ 90 psi

Non-Sparking, Non-Magnetic Safety Hand Tools


Copper-Beryllium Tools (CuBe2) help fulfill the demand in the ATEX Directive 94/9/EC for work in Zones 0, 1 and 2 (Gas, Mists or Vapors); Zones 20, 21 and 22 (Dusts); and M1 and M2 for mining.

Aluminum-Bronze Tools (AlBr) help fulfill the demand in the ATEX Directive 94/9/EC for work in Zones 1 and 2 (Gas, Mists or Vapors), plus Zones 21 and 22 (Dusts).

Choosing the Correct Alloy for Your Application

Aluminum-Bronze (AlBr) Alloy Copper-Beryllium (CuBe2) Alloy

Zone Compatibility

Hardness

Durability

Magnetic Properties

Composition

Help fulfill demand in ATEX Directive 94/9/EC for work in Zones 1, 2, 21 and 22

23-35 HRC

Not as durable as CuBe.

Low magnetism due to minimal ferrous components.Appropriate for non-critical non-magnetic applications.

Al: 9.5-11% Ni: 3.5-5.5% Cu: BalanceFe: 3.5-5.5% Other: 0.5% max

Caution: User must follow all appropriate safety regulations when choosing a tool for their particular working environment.MSDS (Safety Data Sheet) is available upon request. WARNING: Safety tools should not be used in contact with Acetylene.WARNING: Safety tools must only be ground or resharpened by companies approved for grinding such material, according to OSHA regulations.

CS Unitec offers a complete line of High-Quality Non-Sparking, Non-Magnetic and Corrosion-ResistantSafety Tools. CS Unitec is a leader in special CopperAlloy Safety Hand Tools manufactured for use in high-risk areas where a spark can create a disaster.

Gas, Mists or Vapors� Zone 0 - An atmosphere where a mixture of air and flammable

substances in the form of gas, vapor or mist is present frequently,continuously or for long periods.

� Zone 1 - An atmosphere where a mixture of air and flammablesubstances in the form of gas, vapor or mist is likely to occur in normaloperation occasionally.

� Zone 2 - An atmosphere where a mixture of air and flammablesubstances in the form of gas, vapor or mist is not likely to occur innormal operation but, if it does occur, will persist for only a short period.

Zone DefinitionsDusts� Zone 20 - An atmosphere where a cloud of combustible dust

in the air is present frequently, continuously or for long periods.

� Zone 21 - An atmosphere where a cloud of combustible dustin the air is likely to occur in normal operation occasionally.

� Zone 22 - An atmosphere where a cloud of combustible dust in the air is not likely to occur in normal operation but,if it does occur, will persist for only a short period.

For use in Ex Zones, ATEX Zones and Hazardous Environments where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present

Help fulfill demand in ATEX Directive 94/9/EC for work in Zones 0, 1, 2, 20, 21 and 22

33-45 HRC

Very durable due to high hardness and tensile strength.

Non-ferrous components; safer for applicationsdemanding non-magnetic properties.

Be: 1.8-2.1% Other: 0.5% maxCo + Ni: 0.6% max Cu: Balance

Non-Sparking, Non-Magnetic Safety Hand Tools


Available Non-Sparking, Non-Magnetic Tools Include:

Ideal for oil drilling platforms, petrochemical plants, oil refineries, natural gas installations, ammunitionplants, varnish factories, sugar refineries, grain silos, mining and other industries where non-sparkingsafety tools are required. The non-magnetic feature of these alloys also makes them ideal for workingon special machinery with powerful magnets such as MRI machines, military de-mining and explosives.

Angle Tracing Point Ex1302Axe Ex1201Bars Crow Ex1303 Pinch Ex1301Brushes Straight Handle, Scratch Ex1001 Flat Back, Scratch Ex1002Caulking Tool Ex308A, Ex308BChisels 6-Point Ex304A 8-Point Ex304S Bull Point Ex306, Ex318R, Ex320R Cape Ex305 Chipping Hammer Ex314 Clay Spade Ex340 Diamond Point Ex307 Hand Ex304 Paving Breaker Ex318F, Ex320F Pneumatic Ex309AH, Ex310AH Scaling Ex312, Ex380SHClamps C-Type Ex901 Grounding Ex211Crate Opener Ex113SDrifts Cylindrical Ex301 Pin, Straight Type Ex301CDust Pan Ex1004Files Flat, Bastard Ex411F Half Round, Bastard Ex411 Round Ex411RFlange Spreader Ex1102Fork, Garden Ex1010Hammers Ball Peen Ex101 Bricklayers' Ex112 Claw Ex122 Club Ex108 Cross Peen Engineers' Ex102 Cross Peen,Engineers'/Blacksmiths' Ex1041 Cutoff Ex105 Double-face Machinists' Ex103 Plastic Ex121 Scaling Ex106 Sledge Ex104 Sledge (German Type) Ex6475Hatchet Ex1202Hoe, Planters'/Mixing,Angled Blade Ex1015Knives Common Ex409, Ex410, Ex410S Putty/Hand Scraper Ex408Needle, for Air Needle Scalers Ex308A

Pick Railroad or Clay Ex1008Pipe Cutter Ex1512Pliers Adjustable Combination Ex605 Cutting Ex603 Diagonal Cutting Ex601 Diagonal Cutting, Heavy Duty Ex601HD Flat Nose (DIN ISO 5745) Ex606 Groove Joint Ex604 Lineman's, Side Cutting Ex612 Long-Nose w/Side Cutter(DIN ISO 5745) Ex611 Pipe Ex602 Round Nose (DIN ISO 5745) Ex607 Swedish (DIN 5234) Ex505Punches Center Ex303 Pin Ex301PRake Ex1009Ruler Ex1601Saws Hand Ex119 Hacksaw Frame Ex118A Hacksaw Blade Ex118BScissors Ex609Scrapers Angle Ex402 Deck Ex405 Flat Ex401 Long Blade Ex407 Plate Ex406 Triangular Ex403Screwdrivers Offset Ex802 Phillips Ex803 Standard Ex801 Striking Ex801SScriber/Marking Tool Ex302Shears, Cutting Ex608Shovels Round Point w/Long Handle Ex1006 Spade, Edging Ex1007 Square Point w/Long Handle Ex1005Sockets 1/4" drive Ex1503AA 3/8" drive Ex1503A 1/2" drive Ex1503B 3/4" drive Ex1503C 1" drive Ex1503D Adapter/Converter Ex1509 Deep Impact, 3/8" drive Ex1820 Deep Impact, 1/2" drive Ex1830 Deep Impact, 3/4" drive Ex1840 Deep Impact, 1" drive Ex1850 Deep Impact, 1-1/2" drive Ex1860 Driver Handle Ex1504S Extension, Bar Ex1504

Sockets (continued) Impact, 3/8" drive Ex1720 Impact, 1/2" drive Ex1730 Impact, 3/4" drive Ex1740 Impact, 1" drive Ex1750 Impact, 1-1/2" drive Ex1760 Joint, Universal Ex1507 Offset Grip Handle Ex1508 Sliding, Bar Ex1502 Standard Deep, 1/4" drive Ex1610 Standard Deep, 3/8" drive Ex1620 Standard Deep, 1/2" drive Ex1630 Standard Deep, 3/4" drive Ex1640 Standard Deep, 1" drive Ex1650Spatula Ex408STweezer Ex610, Ex610SValve Wheel Hook Ex207FVise, Parallel Ex902Wedges Banana Ex1101B Flange Ex1101 Stone Ex107Wrenches Adjustable End Ex501 Allen/Hex Key(Ball Point, Long Type) Ex209L Allen/Hex Key (DIN 911) Ex209 Box End (12 pt., DIN 3111) Ex204D Box End (6-point) Ex204 Box End, Double,Offset (12-point) Ex202F Box End, Double,Straight Type (12-point) Ex202 Box End, Single (12-point) Ex201 Box, for Extension Ex215 Bung Ex110, Ex110ES Ex110S, Ex213 Chain Pipe Ex600 Combination Ex206 Construction,Open End, with Pin Ex205S Construction,Ring End, with Pin Ex204S Extension for Box Wrench Ex216 Crowfoot Ex1514B Gas Tube Ex212 Handle, Speed Ex1505 Handle, Hinged Ex1506 Monkey Ex503 Open End Ex205 Open End, Double Ex203 Pipe (American Type) Ex502 Ratchet Ex504S, Ex1501S Socket, L-Type (6-point) Ex701 Socket, T-Type (12-point) Ex702 Spanner Adjustable Ex208S Spanner, Fixed (DIN 1810) Ex208 Striking Box(12-point, DIN 7444) Ex201B Striking Box, Offset (12-point) Ex201F Striking, Open End Ex200 Torque Ex1401TB Valve Ex207 Valve Wheel (DIN 87311) Ex207S

Description Part# Description Part# Description Part#

The following kits are also available:5-Piece (Ex2204-Kit)7-Piece (Ex2206-Kit)11-Piece (Ex2211-Kit)24-Piece (Ex2000-Kit)28-Piece (Ex1500-Kit)

Allen Wrench (Ex209-Kit)Combination Wrench (Ex206-Kit)HazMat (Ex2300-Haz)Marine (Ex2200-Kit)Screwdriver (Ex801-Kit)

Socket, 1/4" drive, 15-pc. (Ex1520-Kit)Socket, 1/2" drive, 20-pc. (Ex1530-Kit)Socket, 1/2" drive, 10-pc. (Ex1535-Kit)Socket, 3/4" drive, 16-pc. (Ex1540-Kit)

Portable Magnetic Drills Electric • Pneumatic • Hydraulic


Cut up to 5-1/8" • Twist Drill up to 1-3/4" • Tap up to 1-5/8"

Unique features of CS Unitec's portable magnetic drill line:

Fast, accurate hole cutting… on the job site or in the shop!Designed for continuous operation, CS Unitec's portable magnetic drillsare ideal for drilling structural steel and virtually any metal. We offer acompact, powerful and reliable range of portable magnetic drills forholes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use inconstruction and industry.

• Variable-speed, multiple-geared models• Reversible motors for tapping and machining• Swivel base stand for hard-to-reach areas• Low-profile, compact for drilling in tight spaces• Manual or automatic feed• Lightweight – from 24 lbs.

For a comparison chart of our full line ofportable magnetic drills, see pages 32-33.

MAB 1300ø 5-1/8" cutter capacityø 1-3/4" twist drill capacityø 1-5/8" tapping capacityReversible, 4-gear motorThe ultimate in power MAB 150

ø 1-1/2" cutter capacityFor drilling in tight spaces

MAB 525ø 2-1/2" cutter capacityø 1" twist drill capacity

ø 15/16" tapping capacityReversible, 2-gear motor

MAB 825 & 845ø 4" cutter capacityø 1-1/4" twist drill capacityø 1-1/8" tapping capacitySwivel base (MAB 845)Reversible, 4-gear motor

HB-4400Hydraulic powerø 2-1/16" cutter capacityø 1/2" twist drillFor marine, construction and underwater applications

AIRBOR™ AB-4300Pneumatic powerø 2-1/16" cutter capacityø 1/2" twist drillATEX for hazardous environmentsCountersinkingReaming

TappingTwist Drilling

LubricantsNon-toxic ProLube™ Lubricants prolong tool life by reducing friction and wear

Pilot Pins, Drill Chucks and Tapping ToolsWide variety for cutting, twist drilling and tapping

Arbors and ExtensionsManual and automatic cooling models, as well as quick-lock, no-tools arbor; extensions extend cutter reach up to 18"

Drilling Starter Kits

MOBIL CLAMPConvert magnetic drilling machine to bench drill

Drilling Stand and ViseConvert hand drill to drill press

Vacuum PlatesFor channeled plates and smooth surfaces

Pipe Saddle Clamp SystemSafe, secure drilling of pipes and tubular material

Annular Cutters and Accessories


Also available: Cobalt CuttersLarge-diameter CuttersCarbide-tipped Hole SawsUnibroach® Stack Cutters

6-Series HSS Unibroach™ Annular Cutters Fully ground high-speed steelCutting depth: 1" 2" 3" 4"

Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8" 3/4" - 5-1/8"

8-Series ARMOR-PLATED Unibroach™ Annular Cutters

Fully ground high-speed steel with TiAlN hard coating – for higher working tempsCutting depth: 1" 2" 3"

Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8"

9-Series Unibroach™ TCT Hornet Annular Cutters

Sintered carbide with Tungsten Carbide tipsCutting depth: 1"* 2-3/8" 3-3/8"

Drilling ø: 1/2" - 2" 1/2" - 5-1/8" 3/4" - 5-1/8"

* 1-3/8" depth for diameters larger than 1-1/2"

Accessories for hole cutting, twist drilling, tapping and more

Annular Cutters for burr-free finished holes,without predrilling or step drilling

Portable Magnetic Drill Comparison Chart

MDM 40 MAB 150 MAB 425 MAB 455 MAB 485 MAB 525 MAB 825MAB 845

MAB 1300

Annular CuttersDiameter (ø)

up to ø 1-1/2" up to ø 1-1/2" up to ø 1-3/8" up to ø 2" up to ø 2" up to ø 2-1/2" up to ø 4" up to ø 5-1/8"

Twist DrillsDiameter (ø)

up to ø 5/8" up to ø 7/8" up to ø 7/8" up to ø 1" up to ø 1-1/4" up to ø 1-3/4"

TappingDiameter (ø)

up to ø 15/16" up to ø 15/16" up to ø 1-1/8" up to ø 1-5/8"

CountersinkingDiameter (ø)

up to ø 1-9/16" up to ø 2" up to ø 2" up to ø 3"

ReamingDiameter (ø)

up to ø 3/4" up to ø 7/8" up to ø 1-1/4" up to ø 2"

Stroke 3-1/8" 1" 6-1/3" 6-1/3" 6-1/3" 6-1/3" 10" 3.35"(12" w/out retainer)

Weight 24 lbs. 24 lbs. 29 lbs. 29 lbs. 29 lbs. 35 lbs. 55 lbs. 112 lbs.

Speed Range 1(RPM)

440 400 430 250 50-250 70-280 40-110 30-80

Speed Range 2(RPM)

760 450 100-450 180-580 65-175 50-120

Speed Range 3(RPM)

140-360 130-350

Speed Range 4(RPM)

220-600 210-550

� � � �

� � � �

� � � � � �

Electronic SafetyShutoff Sensor

� � � � � �

Tool Holder Set Screw Set Screw Set Screw Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

Set Screw

Morse Taper (MT) MT2 MT2 MT3 MT3 MT4

Safety FrictionClutch

� �

Torque Control � � �

Swivel Base �

Magnet Size 6-1/2" x 3-1/4" 6-5/16" x3-3/16"

6-5/8" x 3-1/3" 6-5/8" x 3-1/3" 6-5/8" x 3-1/3" 7-1/8" x 3-1/2" 8-5/8" x 4-1/3" 14" x 4-3/4"

SafeMagSystem

CoolMAGCoolMag


Max. hole diameter up to 5-1/8"

Max. twist drilling up to 1-3/4"

Max. tapping up to 1-5/8"

PneumaticHydraulic

Allows thread cutting

Overheating protection

Magnet adhesion indicator

Shuts down motor ifmagnetic contact lost

Swivel base through 30˚ and 3/4"

AIRBOR™

HB 4400

AutoMAB1500

CSU 32ACCSU 32RL

CSU 50ACCSU 50RL

CSU 80AC

CSU 100/3

up to ø 2-1/16" up to ø 2-1/16" up to ø 1-1/2" up to ø 1-1/4" up to ø 2" up to ø 3-3/16" up to ø 4"

up to ø 1/2" up to ø 1/2" up to ø 1/2" up to ø 7/8" up to ø 1-1/4" up to ø 1-1/4"

up to ø 3/4"

(CSU 32RL only)

up to ø 15/16"

(CSU 50RL only)

up to ø 1-1/8"

up to 10-1/4" 3-3/4" 3" 5-3/4" 6" 10" 10"

43 lbs. 48-1/2 lbs. 37-1/2 lbs. 24 lbs. 29 lbs. 57 lbs. 57 lbs.

400 0-630 360 450 250 100 40-140

450 175 120-480

245

385

�(CSU 32RL only)

�(CSU 50RL only)

�

� � � �

� � � �

� � � �

Set Screw Set Screw Set Screw Set Screw Quick-changekeyless

Quick-changekeyless

Quick-changekeyless

MT2 MT3 MT3

� � � � �

8-3/4" x 3-1/2" 7-1/4" x 3" 7-1/8" x 3-1/2" 6-5/16" x 3-1/4" 6-1/2" x 3-1/2" 9" x 4-3/8" 9" x 4"

SpecialFeaturesSpecial

Features


Grind In Corners!Grind In Corners!

Linear Grinders and Pipe Sanders


Electric orPneumatic

Abrasive mounting system saves time, reduces cost and eliminatesvibration! No-tools changeover of grinding and polishing wheels –wheels and accessories slide onto the finned, rubber shaft and securethemselves when machine turns. A wide selection of hollow-core slip-onabrasives is available for the PTX Eco Smart.

Abrasive grinding, surface conditioning fleece, ceramicgrinding, TZ pyramid and Super Polish belts available.

Exact belt size is 40mm x 780mm (1.5" x 30.7").Contact CS Unitec for more information.

PTX Eco Smart Linear GrinderThe professional surface finisher forhard, continuous use• Multifunctional grinding and polishing system for flat surfaces and open

or closed pipe constructions

• Grind from coarse to shadow-free matte finish, up to a mirror polish

• Remove welds, deep scratches, oxidation and rust

• Ideal for stainless steel, steel and nonferrous metals includingaluminum, brass, bronze and copper, as well as wood and rigid plastic

• Complete line of grinding wheels, belt sleeves, special brushes,polishing and maintenance abrasives available

PIPE-MAX Pipe Belt GrinderCombination pipe belt sander andgrinder for diameters up to 14"• Sand pipes from small to large diameter, up to 14"

• Follows handrail contours to grind and polishup to a high-gloss finish

• Remove weld seams from flat surfaces, leaving no edges

• Ideal for stainless steel, aluminum and high-quality metals

• Powerful 14.5 Amp motor and variable-speed control from950 to 3500 RPM (3/4HP pneumatic model available)

• Complete line of grinding wheels, belt sleeves, specialbrushes, polishing and maintenance abrasives available

PTX Eco Smart SpecificationsOrder Number 47002A

Power 15.5 Amp (1710 Watts), 110 V / 60 Hz (230 V / 60 Hz available)

Variable Variable speed control from 1000 to Speed 3800 RPM with tachogenerator for constant speed, even under load

Speed With fine adjustment for using Control Dial abrasives at optimum efficiency

Wheel Width up to 4" (or 6" wide abrasives)

Wheel Dia. up to 4-1/2"

Weight 7.25 lbs. (3.3 kg)

PIPE-MAX SpecificationsOrder Number 38502A

Power 14.5 Amp (1600 W) 110V (220 V also available)

Belt Size (LxW) 30.7" x 1.6"

Belt Speed 33 - 100 ft./sec.

Pipe ø max. 14"

Weight 11.25 lbs.

Electric orPneumatic

HIPPO Mixing Station and Mixing Drills


Professional, Heavy-duty, Hand-held Mixers for Fast, Efficient MixingFrom self-leveling compounds to prefab mortar, CS Unitec has a portable mixer todo the job quickly. Every CS Unitec mixer has been designed for high reliability, withthe power to provide optimum blending of construction materials on the job site.

Mix, Transport and Pour Directly Onto the Floor!

PMH 70X-RL for Rough TerrainRimless Bucket and Removable Liner

Electric 110 Volt AC

16 Amp/1800 Watt2-speed Motor

1st Gear: 140 RPM(Load Speed)

2nd Gear: 470 RPM(Load Speed)

Model No. Motor Specifications

PMH 70F for Level FloorsWith Rimmed Bucket

PMH 70X for Rough TerrainWith Rimmed Bucket

PMH 70F-RL for Level FloorsRimless Bucket and Removable Liner

Multiple Batch Mixing with Removable LinerMixing multiple batches is easier and faster with the new, removable liner and rimless bucket system.

• Mix consecutive batches without downtime• Resilient, pliable liner is easily cleaned• Alternating liners prevents cross contamination• Extends life of bucket

The HIPPO is also available with a Pneumatic-powered Mixing Motor2.2 HP, 90 PSI/67 CFM, 2 speeds (190/420 RPM)PMH 70F-AIR-RL; PMH 70X-AIR-RL; PMH 70F-AIR; PMH 70X-AIR

Bowl Capacity:5 x 40 lbs. mix+water (20 gal /290 lbs.)5 x 20 kg mix+water (80 liters/130 kg)

Motor Mounting:Reversible for "alongside" mixing

Tilting Cradle:Balanced for easy operation

Weight: 99 lbs.

The PORTAMIX HIPPO features:• Easy operation – one person can mix, transport

and pour 5 bags or 20 gallons• Accurately place material directly onto the floor• Produces excellent mix consistency• Ideal for mixing and dispensing into 5 gallon containers• Pre-tinted material is easily blended

After mixing the first batch, the liner can be removed andcleaned. To speed up production, a second liner can beused while the first liner is being cleaned. The use of a lineralso helps to prevent cross contamination and minimizeswear to the HIPPO bucket, extending its life.

PortableMixingStands

Save time byrunning mixersindependently

Model 25GP-WD Model RST 91

CS Unitec offers three air-powered models that

are inherently saferfor mixing paint, glue,

epoxy, mortar, concrete,refractory cement and other

materials in shipyards and the oil andgas industries. They can be usedaround water with no fear of shock orblown circuitry. Contact us for details.

Air-Powered Mixers forHazardous Environments

Model No.

0-450

250-580

0-450

100-275

9

11.5

15

15

9.5

10.5

10.5

14.5

EHR 18 S

EHR 20 R

EZR 22 R/RLTwin Paddle

EHR 23/1.3R

MotorPower (Amps)

LoadSpeed (RPM)

2 bags/20 gal.

3 bags/25 gal.

5 bags/25 gal.

5 bags/35 gal.

CapacityWeight(lbs.)

SuitablePaddles

WG 120MG 120RG 120

WG 135MG 140

TWP 140

P/N31610000(included)

WG 160MG 160

TWP 160

700lbs./hr.

900lbs./hr.

1200lbs./hr.

1800lbs./hr.

Max.Output

EZR 22 R/RLPush-pull Mixer:Quick, thoroughmixing with twin

paddles andclockwise/

counterclockwiserotation

EHR 18 SIncludesWG 120paddle

EHR 20 R EHR23/1.3R

CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumaticportable band saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-heldconcrete core drills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulicportable band saws, reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools,portable mixers and dust extraction vacuum systems.

Also Available from CS Unitec

CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2013, CS Unitec, Inc., 10-13-7500

View product demonstrationsat www.csunitec.com.

… the power of innovation!®

Portable Magnetic Drills:Magnetic Drills & Accessories

Hand-held Drills and Drive UnitsNut Runners

Hammer Drills and more

Surface Finishing Tools:High-performance tools and accessories

for grinding, sanding, polishing,deburring and beveling stainless steel,

steel, nonferrous metals, wood and more

Non-Sparking Hand Tools:Non-sparking Hand Tools

Power Tools for use in Ex Zones, ATEXZones and Hazardous Environments

Portable Saws:Hacksaws

Reciprocating SawsBand SawsChain SawsCut-off Saws

Concrete Tools:Surface Preparation Tools

Concrete GrindersDust Collection Systems

Diamond Core DrillsAir Concrete Saws

Portable Mixers:Portable Mixers and Mixing Stations

for Mortar, Concrete, Plaster,Flooring Adhesives, Grout, Coatings,Paint, Self-Leveling Compounds and

other Cementitious Materials

For tool specifications and ATEX and Ex Zoneinformation, visit www.csunitec.com.

Call 1-800-700-5919 or 203-853-9522 to requestany of the catalogs shown below.

View demo videos atwww.csunitec.com

metalworking tools for marine, bridge, - cs unitec,...

Documents