metalwork tools 2 quiz cold chisel gouge 1.what is the correct name for this tool? firmer chisel...
TRANSCRIPT
Metalwork Tools 2 Quiz
Cold Chisel
Gouge
1. What is the correct name for this tool?
Firmer Chisel
Bevel Edged Chisel
Mortise Chisel
High Carbon Steel
Cast Iron
2. What type of metal is a cold chisel made from?
High Speed Steel
Wrought Iron
Mild Steel
3. What is the correct name for the tool shown below
Riveter
Rivet Punch
Rivet Set & Snap
Rivet Bar
4. What is a hand countersink used for?
Removing Burrs
Drilling Holes
Centre Punching Holes
5) What is the correct name for this tool?
End Cutters
Tinsnips
Shears
Pliers
6. Which of the following tools would be used to cut 6mm Dia steel bar?
A Panel Saw
A Coping Saw A Piercing saw
A Jnr Hacksaw
7. What is another name for Mole Grips?
Long nose Pliers
Engineers Pliers
Self Grip Pliers
Plumbers Wrench
Stillson
It can grip round objects like pipe
It is easier to use
It has been drop forged
It is cheaper to buy
8. What major advantage does a Stillson Wrench have over an Adjustable Spanner?
9. What is the correct name for this tool?
Jewellers Snips
Tin Snips
Diagonal Cutters
Heavy Duty Snips
10. Which tool is designed to cut rivets?
Engineers Pliers Long Nose Pliers
Diagonal Cutters End Cutters
Stillson
Water Pump Pliers Long Nose Pliers
11. What is the correct name for this tool?
Engineers Pliers
12. Which tool is designed for working in tight areas and cutting fine wire?
Engineers Pliers Long Nose Pliers
Diagonal Cutters End Cutters
Blocking Hammer
Repousse Hammer
13. What is the correct name for this tool?
Claw Hammer
Planishing Hammer
Cross Pein Hammer
Ball Pein Hammer
Pin Hammer
Centre Punches
Parallel Punches Letter Punches
14. What is the correct name for these tools?
Nail Punches
15. Letter stamps can be used to stamp letters on which of the following?
High Speed Steel
Aluminium
Acrylic
Perspex
The Toolmakers clamp can be used to hold small pieces of work while it is being brazed
The Toolmakers clamp can be used to hold small pieces of work while working on them
16. What are Toolmakers clamps used for?
The Toolmakers clamp can be used to hold small pieces of work while it is being welded
Repousse Hammer
Pillar Drill
Parallel Punch
Centre Punch
17. Which tool could be used to create this dimpled pattern on the back of this drawer handle?
Cross Pein Hammer
18. Which of the following tools would be used to cut 0.5mm thick Copper Sheet?
A Panel Saw
A Coping Saw Tin Snips
Engineers Pliers
It takes time to adjust the spanner to the correct size.
The adjustable Spanner has a tendency to round the corners of the nut or bolt.
19. What is the main disadvantage to using an adjustable spanner
Adjustable spanners are bigger than ordinary spanners.
Well Done
Quiz Completed
Wrong
Click here to try again