metal products for the insulation industry€¦ · volunteer metal systems offers the complete...
TRANSCRIPT
METAL PRODUCTS for the Insulation Industry
Metal Roll Jacketing
Industrial Sheeting
Metal Elbows
Metal Tees
Engineered Systems
Accessories
www.volunteermetals.com
METAL ROLL JACKETINGAluminum, stainless steel or galvalume® roll jacketing for the protection of mechanical insulation available with polykraft or polyfilm moisture barrier.
Aluminum Thicknesses: .016”, .020”, .024”, .032” and .040”Finishes: Smooth, stucco embossed, 3/16” corrugated and painted Roll Widths: 36” and 48”
Stainless Steel Thicknesses: .010” , .016” and .020”Finishes: Smooth, stucco embossed, 3/16” corrugatedAlloys: Type 304, Type 316Roll Width: 36”
Galvalume® Thicknesses: .016” , .020” and .024”Roll Width: 36”
DEEP CORRUGATED SHEETSAvailable in aluminum, galvanized, and stainless steel. Non-clad aluminum and stainless steel sheets may be provided with a moisture barrier membrane bonded to the interior surface.
Aluminum: .016”, .020”, .024”, .032” and .040”Galvanized: 26, 24 and 22 gaugeStainless Steel Sheet: .010” - .020” thicknessesGalvalume®: .016”, .020” and .024”Finishes: Smooth and stucco embossedProfiles: 1¼” x ¼” and 2½” x ½”
CUT AND ROLL/ Z-LOCK JACKETINGAluminum or stainless steel cut and rolled to your exact specifications for ready to use on site installation. Z-lock is available for positive closure and installation ease.
Aluminum Thicknesses: .016”, .020” and .024”Finishes: Smooth and stucco embossedRoll Width: 36”
Stainless Steel Thicknesses: .010” , .016” and .020”Finishes: Smooth, stucco embossed, 3/16” corrugatedAlloys: Type 304, Type 316Roll Width: 36”
Metal Products
ALUMINUM ELBOW COVERS AND TEE COVERS Perfect for weather sealed fit over 90º degree and 45º degree elbows and tee/valves as part of insulated mechanical systems.
ElbowsThicknesses: .024”For pipe sizes: ½” - 12”
Tees Thicknesses: .024”For pipe sizes: ½” - 7”
BOX RIB SIDING4” box rib wall panels are frequently used for lagging in power and process facilities as well as for cryogenic temperature control in industrial warehouses.
Types: 3004-7072 alclad aluminum, 3003 or 3105 non-clad aluminum, painted aluminum, stainless steel and painted steel
Profile: 1” high ribs on 4” centers
Finish: Standard aluminum finish is stucco embossed
Thicknesses: Aluminum - .032”, .040”, and .050” Stainless steel – 26 ga = .020”, 24 ga = .024”, 22 ga = .032” and 20 ga = .040” Aluminum alclad - .032”, .040” and .050”
Width: 38½” for 36” coverage; 455/8” for 44” coverageLengths: Cut-to-length as requested
ACOUSTIC METAL JACKETING Sold under the Quiet-Jac™ name, it features MLV (Mass Loaded Vinyl) laminated to either aluminum or stainless steel. Ideal for isolating piping and ductwork within exposed commercial and industrial areas.
Widths: 36” and 33½” Aluminum Thicknesses: .016”, .020”, .024” and .032”Stainless Steel Thicknesses: .010”, .016” and .020”MLV Densities: ½ lb, 1 lb and 2 lb
FASTENINGAluminum and stainless steel strapping and seals for maximum tensioning strength. We also offer a wide range of devices for securing jacketing systems in place.
ACCESSORIES A variety of accessories are required for successful job completion.
n Metal Bandingn Wing Sealsn Closed Sealsn Z-Clips
n Tie Wiren Screwsn Fabricated Straps
n Expansion Springsn Compression Springsn Flip Clipsn Banding Toolsn Securement Clips
n Caulkn Butt Strapn Closure Stripn Sound Barrier
Covering Demanding Insulation Applications Engineered Systems and Solutions
HEADQUARTERS: 290 Fortner Road | McEwen, TN 37101 | Phone: 931-582-6871 | Fax: 931-582-6092
DISTRIBUTION CENTERS:Ohio: 6810 Cochran Road | Solon OH 44139 | 440.914.1122Texas: 2902 East 13th Street, Suite 200 | LaPorte, TX 77571 | 1.800.874.1748 North Carolina: 109 Sands Road | Reidsville, NC 27320 | 1.800.551.9760California: 4113 Gold River Lane | Stockton, CA 95215 | 1.800.833.4500
Visit us online at www.volunteermetals.com
© 2019 Volunteer Metals Systems, LLC.05192KOP
Volunteer Metal Systems offers the complete package for
custom engineered systems. From inception to completion
our history is one of executing simple to complex engineered
solutions. Our engineering staff has aided countless customers
providing custom built solutions for all specifications.
Our complete engineered systems include comprehensive
material packages with detailed erection drawings and
impeccable field support. VMS can design and build lagging
solutions for a variety of environmental thermal systems
including SCRs, scrubbers, baghouses, electrostatic
precipitators and ductwork. Solutions may include: H-bar
systems for roofing and siding, pre-insulated panel systems,
H-bar systems for high temperature, sliding H-bar systems
and expansion joints. We also offer:
State of the art equipment and a dedication to continuous improve-
ment makes for cost effective, architecturally desired components
for power generation and environmental protection processes.
Custom work is a hallmark of our fabrication capabilities for
engineered systems and solutions. Provide your business a
competitive edge today, consult with us to see how we can help
by calling 931-582-6871.
n Mineral wool board/blanket insulationn Wire mesh and/or expanded metal facingsn J-hook & locking washer attachmentn Insulated access doors