Metal chains necklace

step 1: preparing your materials

Prepare your work environment. Organizing your tools and materials will help

you work faster and more efficient.

Step 2: cutting the chains

choose a few different kinds of chains to create this necklace.

cut the chains using the cutting tool.

The top and shortest chain is 12cm long, cut each chain 1cm longer then the one before.

Step 3: hanging all the chains

divide the chains to 5 groups that will be hanged on the 5 loops on the end connector with 5 settings of 39ss.

Open 6mm jump ring and hang two chains on it, the shorter chain on top of the longer one.

Close and open the jump rings using two pleir tools.

Hang the chains in the same order on the other end of the connector.

Step 4: connecting the necklace

cut 12cm of flat gourmet chain.

connect the clasp with 6mm jump ring, and the other end of the flat gourmet chain to the big loop on the end connector.

I used 2 jump rings so it will not move so much.

Step 5 : setting the stones

Place the stone in the center of the stone setting and with the help of the setting tool bend the prongs towards the stone in order to embed it.

Bend the prongs gently to make sure you don't damage the stone or crack the plating in this process.

Great!

The necklace is ready!

Enjoy your new beautiful Swarovski necklace.

Gita team.