met-80 mercury sampling equipment ... -...

M E T - 8 0 C aTa l o gcleanair.com

1.800.223.3977

MET-80 Mercury Sampling Equipment For Environmental Professionals Worldwide

Terms & condiTionsPricesAll prices published by CleanAir may be changed at any time without notice. All prices quoted by CleanAir or CleanAir’s representatives are valid for thirty (30) days, unless otherwise stated in writing. All prices for the Products will be as specified by CleanAir or, if no price has been specified or quoted, will be CleanAir’s price in effect at the time of shipment. All prices are subject to adjustment on account of specifications, quantities, raw materials, cost of production, shipment arrangements or other terms or conditions which are not part of CleanAir’s original price quotation. The prices in the Domestic price list are for delivery in the USA. Orders for delivery to other countries will be based on Export price list.Taxes and other ChargesPrices for the Products exclude all sales, value added and other taxes and duties im-posed with respect to the sale, delivery, or use of any Products covered under this agreement. The amount of any present or future taxes and duties will be added to the purchase price and must be paid by Buyer. If Buyer claims any exemption, Buyer must provide a valid, signed certificate or letter of exemption for each respective jurisdiction.Payment TermsTerms of payment are Net 30 days with established credit, or by Visa/Master Card at time of order. Invoices over 30 days past due are subject to a 1.5% finance charge per month.Shipments and DeliveryUnless otherwise instructed, shipments are made as soon as possible after receipt of order by the method of transportation, which in our judgment will be most satisfactory. Freight charges are prepaid and added to the invoice. The right is reserved to make partial shipments where delays beyond our control may delay a portion of the order. All domestic sales by CleanAir are F.O.B. CleanAir’s Facility of Shipment, as defined in the Uniform Commercial Code. All international sales by CleanAir are Free Carrier (FCA) CleanAir’ Facility of Shipment, as defined by INCOTERMS 2010.Title and Risk of lossTitle to and risk of loss of all products shall pass to Buyer as soon as the products are delivered by CleanAir to the carrier. Each shipment date is approximate, and CleanAir shall not be responsible for any damages of any kind resulting from any delay in ship-ment or delivery of any products.Export RestrictionsBuyer acknowledges that each Product and any related software and technology, in-cluding technical information supplied by CleanAir or contained in documents (collec-tively “Items”), is subject to export controls of the U.S. government. The export controls may include, but are not limited to, those of the Export Administration Regulations of the U.S. Department of Commerce (the “EAR”), which may restrict or require licenses for the export of Items from the United States and their re-export from other countries. Buyer shall comply with the EAR and all other applicable laws, regulations, laws, trea-ties, and agreements relating to the export, re-export, and import of any Item. Buyer shall not, without first obtaining the required license to do so from the appropriate U.S. government agency; (i) export or re-export any Item, or (ii) export, re-export, distribute or supply any Item to any restricted or embargoed country or to a person or entity whose privilege to participate in exports has been denied or restricted by the U.S. government. Buyer shall, if requested by CleanAir, provide information on the end user and end use of any Item exported or to be exported by Buyer. Buyer shall cooperate fully with Clea-nAir in any official or unofficial audit or inspection related to applicable export or import control laws or regulations, and shall indemnify and hold CleanAir harmless from, or in connection with, any violation of this Section by Buyer or its employees, consultants, or agents.Design ChangesDesign changes are made from time to time. Some items may differ slightly from cata-log illustrations or descriptions. Changes are made in the interest of better performance and quicker delivery.Returned ItemsAuthorization must be obtained from CleanAir before returning any products. When requesting return authorization, please advise reason for return, date of purchase, Buyer’s P.O. number and CleanAir’s invoice number. All orders for special, custom, or non-stocked products are non-cancellable, non-returnable and non-reschedulable unless defective and only with a returned material authorization number which shall be issued at the CleanAir’s sole discretion. . All returns must be shipped freight prepaid at the Buyer’s expense.WarrantyClean Air Engineering warrants products to be free from defects and workmanship for a period of one year after delivery date. The sole and exclusive remedy for defective goods shall be repair or replacement of defective parts or payment price of the goods for which damages are claimed, at CleanAir’s option.

Returned ItemsAuthorization must be obtained from CleanAir before returning any products. When requesting return authorization, please advise reason for return, date of purchase, Buyer’s P.O. number and CleanAir’s invoice number. All orders for special, custom, or non-stocked products are non-cancellable, non-returnable and non-reschedulable unless defective and only with a returned material authorization number which shall be issued at the CleanAir’s sole discretion. . All returns must be shipped freight prepaid at the Buyer’s expense.WarrantyClean Air Engineering warrants products to be free from defects and workmanship for a period of one year after delivery date. The sole and exclusive remedy for defective goods shall be repair or replacement of defective parts or payment price of the goods for which damages are claimed, at CleanAir’s option.Intellectual PropertyBuyer acknowledges that CleanAir’s Products and all intellectual property associated with same, including but not limited to trade marks, service marks, patents, copyrights, software, design documents, and proprietary know-how and other attributes are the sole and exclusive intellectual property of CleanAir. No intellectual property rights transfer to Buyer as a result of CleanAir’s sale of its Products unless expressly agreed to in writing. The Buyer may not alter, modify, enhance, create derivative works, reverse engineer, de-compile, decrypt, or otherwise reduce the Products or Software without prior written consent of CleanAir. If software is purchased, Buyer is granted a nonexclusive royalty-free license to use the software in accordance with the accompanying Software License Agreement.limitation of liabilityIn no event, whether as a result of breach of contract or warranty, tort (including neg-ligence) or otherwise, shall CleanAir be liable for: (a) any consequential, incidental or exemplary damages, including, without limitation, any loss of profit or revenues, loss of use of any equipment, damage to other equipment, cost of substitute equipment or down-time costs; (b) any claims, demands or actions against Buyer by any third party; (c) any loss or claim arising out of the use of or related to the products or services; or (d) any unavailability of the product for use or any lost, damaged or corrupted data or software. CleanAir’s aggregate liability will be limited to the value of the goods provided in conjunction with Buyer’s purchase order. Buyer agrees to indemnify CleanAir from and against any and all third party claims which are brought against CleanAir resulting from Buyer’s direct or indirect use of any products purchased. The indemnity obligation shall be broadly construed, and shall include not only indemnification for any third party claims, but also for any and all attorneys’ fees, litigation costs and like expenses which CleanAir is forced to incur with respect to an indemnified obligation.Commercial arbitrationAny disputes between Buyer and CleanAir regarding this order which cannot be settled amicably by the parties hereto shall be submitted to binding arbitration in accordance with the rules, practices, and procedures of the American Arbitration Association. Any arbitration proceeding shall take place at Chicago, Illinois. The prevailing party at arbi-tration shall be entitled to recover as a part of the arbitrator’s award all of its arbitration expenses, including, but not limited to, attorney fees, expert fees, travel costs, court re-porter fees, and the like. The laws of the State of Illinois will govern the interpretation and enforcement of this agreement. Notwithstanding the foregoing, CleanAir reserves the right to elect to commence general commercial litigation against Buyer for its failure to pay for products purchased in accordance with the terms described herein. The parties agree that Cook County, Illinois shall be the proper venue and jurisdiction for any such claims. The prevailing party in conjunction with such litigation shall be entitled to recover as a part of the final judgment all of its litigation expenses, including but not limited to attorneys fees, expert fees, trial costs, court reporter fees, and the like.generalIf any provision of these Terms and Conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these Terms and Conditions and the remainder of the provision in question shall not be affected thereby.Sole agreementCleanAir sells products only under the foregoing terms and conditions and will not be bound by terms or conditions stated by any purchaser in any offer, acceptance, or other contractual document. Placing an order or accepting delivery of products constitutes acceptance of these terms and conditions. No waiver, alteration or modification of any of the provisions hereof shall in any event be effective or binding upon CleanAir unless in writing and signed by a duly authorized employee of CleanAir.

CleanAir® ExpressA Division of CleanAir® Engineering

Phone: (800) 223-3977 Fax: (847) 991-8924Web site: www.store.cleanair.com

MET-80 SaMPlIng EquIPMEnTCleanair® Engineering Headquarters500 West Wood StreetPalatine, Illinois 60067Tel: 800-627-0033 847-991-3300Fax: 847-991-3385

Cleanair® Engineering Express212 Woodwork lane

Palatine, Illinois 60067Tel: 800-223-3977Fax: 847-991-8924

Online Store: www.store.cleanair.com

• MET-80• Calibration Services • Technical Services• Engineering and Custom Fabrication

Services• Repair Services

For Your Convenience we accept:

Clean Air ExpressA Division of Clean Air Engineering


Email: [email protected]

MET-

80 P

robe

MET-

80 P

robe

MET-

80 P

robe

MET-80 SaMPlIng PRoBE Call or order online Today! ®

MET-80 Probe Assembly

MET-80 Heated Sample Line Strain Relief

MET-80 Sorbent Tube Trap Cages

Part number Item1225 Heat Shrink Entry Seal Boot

Part number Item1080DS6 MET-80 Dust Shield Protector 5”1080DS5 MET-80 Dust Shield Protector 8”

*5/8” Stainless Steel Ferrule is Split (Cut)

MET-80 Heated Sample Line Heat Shrink Entry Seal Boot

Part number Item00125 MET-80 HSL Strain Relief

MET-80 Dust Shield Protector

Part number Item

010530HLMET80 5’ Alloy C-276 Probe, Long Trap with 35’ Heated Sample Line

• 01 - Length - Material (H= Alloy C-276 Blank= 316L Stainless Steel), - Trap Length (L = Long 450mm, Blank = Short 240mm) - Heated Sample Line Length- MET80

• Example: 0105HL35MET80 5’ alloy C-276 Probe, long trap with 35’ HSL (40’ total length)

Part number Item0900C 240 mm Sorbent Trap Cages 316L0900CL 450 mm Sorbent Trap Cages 316L0900CH 240 mm Sorbent Trap Cages C-2760900CHL 450 mm Sorbent Trap Cages C-276

*shipped with 3 @ 1242

o-rings installed and Greased




MET-80 ProbeMET-80 Probe

MET-80 Probe MET-80 SaMPlIng PRoBE Call or order online Today! ®

MET-80 O-Rings

MET-80 Probe Trap Spacers

MET-80 Compression Nuts and Ferrules

Part number Item1242 O-Ring (Three per Trap Cage)

1242T O-Ring Extractor Tool0815M Vacuum Grease for O-Rings (1/4 oz)1230 MET-80 Port Adapter O-Ring

Part number Item0421SNT 316L Turn Down 5/8” Nuts0421HN C-276 Turn Down 5/8” Nuts0421TF 5/8” Teflon Ferrules

Part number Item1080TS-1 MET-80 Probe Trap Spacer 1”1080TS MET-80 Probe Trap Spacer 2”1080TSL MET-80 Probe Trap Spacer 9.25”

MET-80 Male Type K Thermocouple

Part number Item0316M Male Type K Thermocouple0316F Female Type K Thermocouple

H




MET-

80 G

CMME

T-80

GCM

MET-

80 G

CM MET-80 gaS ConDITIonIng MoDulE Call or order online Today! ®

MET-80 Gas Conditioning Module

Features:

General:

Technology:

Part number Item07102RMET2A MET-80 Gas Conditioning Module

The Sample Gas Cooler is designed to lower the sample dew point and separate water vapor from humid sample streams in gas analysis systems. A typical application is to provide and maintain a conditioned gas sample prior to gas analysis by moisture intolerant analysis equipment.

To achieve a stable dew-point at varying inlet conditions, an improved proportional temperature controller and a high per-formance heat exchanger have been designed. The cooling system features a continuously running non-CFC compressor motor filled with environmentally friendly R134a. The heat ex-changer is built into analuminum cylinder, which absorbs peak loads and utilises maximum heat transfer rate and guarantees leak free operation. A built-in condensate discharge pump re-moves the condensate continuously.

• Proven and reliable technology• Built-in condensate discharge pump• Stable dew-point + 3°C• Digital temperature display• High performance heat exchanger• Proportional temperature control• Compact and robust• Environment-Friendly




MET-80 GCMMET-80 GCM

MET-80 GCM MET-80 gaS ConDITIonIng MoDulE Call or order online Today! ®

MET-80 Gas Conditioner Replacement Peristaltic Pump

MET-80 Gas Conditioner Replacement Pump Tubing

MET-80 Gas Conditioner Solid State Relay

Part number Item9774 Replacement Peristaltic Pump

Part number Item9774RT Push-on Peristaltic Tubing

Part number Item0914 Solid State Relay




MET-80 Dual SCRuBBER MoDulE Call or get a quote online Today! ®

MET-

80 D

SMME

T-80

DSM

MET-

80 D

SM

MET-80 Dual Scrubber Module (DSM)

Features:

General:

Part number Item1080SEM MET-80 Dual Scrubber Module (DSM)

• Charged with Alumasorb for acid gas removal and Drierite

• Acolor indicating Dessicant to indicate when Alu-masorb is exhausted

• Redundant scrubbers allow for sorbent replace-ment while in sampling mode

The Dual Scrubber Module (DSM) contains a pair of gas scrub-bers for each sample path installed at the exit of the GCM. Only one scrubber per sample path is in use at any one time, with the second scrubber facilitating rapid exchange of the adsorbent material between monitoring events. A series of operator-con-trolled solenoid valves direct the gas sample through the active scrubber, which is determined by the operator at the beginning of a monitoring event.




MET-80 DSMMET-80 DSM

MET-80 DSM MET-80 Dual SCRuBBER MoDulE Call or get a quote online Today! ®

MET-80 Scrubber Cartridge

MET-80 Scrubber Solenoid

Part number Item09475 MET-80 Scrubber Solenoid Valve

MET-80 Scrubber Solid State Relay

Part number Item09913 Solid State Relay 5-60 Vdc

MET-80 Scrubber Alumisorb with Indicator

Part number Item08040A5 Alumisorb 5lb Container with indicator

*msds included with every shipment

Part number Item09907A Cartridge Complete Assembly09907 Scrubber Cartridge Only09908 Scrubber Quick Disconnect Fitting09909 Scrubber Tube End Fitting08041 Clips for Scrubber Cartridge

09907

09909

09908

08041




MET-

80 G

SMME

T-80

GSM

MET-

80 G

SM MET-80 gaS SaMPlIng MoDulE Call or order online Today! ®

MET-80 Gas Sampling Module with Mass Flow Meters

Features:

General:

Part number Item1080MFM MET-80 Gas Sampling Module with Mass Flow Meters

• Located downstream from the DSM• Contains two independent gas paths• Each path has two thermal mass flow meters• Each sample pump is PTFE coated to avoid corrosion• Each path has an external membrane to prevent mois-

ture intrusion and an internal filter for flow dampening

The use of mass flow meters, rather than the traditional dry gas meters, allow for quicker leak checks and calibration checks during the sampling event. The low-level meter is used for nor-mal monitoring operation that requires sampling rates of up to 400 cc/min, and the high-level meter is used for applicatiions that require sampling rates of up to 4,000 cc/min, such as may be needed for a Relative Accuracy Test Audit.

In practical applications, the full sampling range of the unit is 50 cc/min to approximately 1,800 cc/min, depending primarily on the pressure drop created by the sorbent traps. Each flow meter has an independent solenoid valve for control of sample flow rate during monitoring. A third solenoid control valve is used to adjust the system vacuum during leak checks. The mass flow meters and solenoid valves for both sample paths are mounted on a flow manifold made from a single block of Kynar (PVDF)




MET-80 GSMMET-80 GSM

MET-80 GSM MET-80 gaS SaMPlIng MoDulE Call or order online Today! ®

MET-80 Water Trap Filter Assembly

MET-80 Flow Meter

Part number Item0946 Flowmeter .1-1 LPM Non-valved

0418KBRME 1/4” Barb - 1/8” MNPT Kynar Elbow

Part number Item09906A Water Trap Assembly09906 1 Micron Ptfe Filter with Water Trap

0417KBME 1/8” Barb - 1/8” MNPT Kynar Elbow0418RSMC 1/4” T - 1/8” MNPT S.S. Union Male

Part number Item09905A Particulate Filter Assembly09905 Particulate Filter 99.99% Eff.1203 Pvc Elbow 1/4” Pipe Threaded

0418KBMC 1/4” Barb x 1/4” MNPT Kynar Straight

MET-80 Particulate Filter Assembly

09906

0417KBME

0417RSMC

0417KBRME

0417KBRME

0946

09905

1203

0417KBMC




MET-

80 G

SMME

T-80

GSM

MET-

80 G

SM MET-80 gaS SaMPlIng MoDulE Call or order online Today! ®

MET-80 Mass Flow Meter

Part number Item1080MF1 MFM Low Rate 10-500 SCCM Air1080MF2 MFM High Rate 100-5000 SCCM Air

MET-80 Proportional Solenoids

MET-80 Kynar Fittings for Manifold

Part number Item09701M Flow Proportional Solenoid Size 47 0970M Leak Proportional Solenoid Size 45

0970MO MFM Solenoid O-Rings

Part number Item0417KBME 1/8” Barb - 1/8” MNPT Kynar Elbow

0418KBRME 1/4” Barb - 1/8” MNPT Kynar Elbow




MET-80 GSMMET-80 GSM

MET-80 GSM MET-80 gaS SaMPlIng MoDulE Call or order online Today! ®

MET-80 Sampling Pump

Part number Item99373MFMA Sampling Pump Assembly

99373MFMRK Sampling Pump Rebuild Kit

MET-80 MFM Electrical Components

MET-80 Vacuum Sensor

MET-80 Electrical Fan

Part number Item1153M Fan Mass Flow Meter GSM

1153MG Fan Guard for 1153M

Part number Item0969M Vacuum Sensor 4-20 Output

Part number Item0935 Power Supply Met Sampler 60W09913 Solid State Relay 5-60 Vdc8907 Detachable Power Cord




oRDERIng noTES

Date Item ordered Size qty Shipping Date Project #/ name

met-80 mercury sampling equipment ... -...

Documents