Memory Card Image Transfers

Transferring your images with the Microsoft Scanner and Camera Wizard

These instructions are based on Windows XP.

Vista is similar…and is much improved version making it the Wizard of choice for Vista.

When you first insert your card, you SHOULD be prompted with a "Wizard". There are lots of ways to get your images on to the

computer depending on what programs are installed on YOUR computer AND what is on your card.

So, there may be a better way to accomplish this...but this tutorial will use the TOP method.

Other Wizards that COULD be used…

depending on what programs are installed on YOUR computer AND what is on your card.

Do not choose to "Always do the selected action." as you may want to do other options, such as Open folder to view files" or use other

transfer protocols at various times.

Choose the “Open folder…” option if you only want to copy the folder from a jump drive

• This is helpful if you have already done the initial copy, and you are needing to copy named files, or just view the files to copy a few over via drag and drop.

If you hit cancel by accident…or you need to do a VIRUS scan (required)

• Two options– Remove the media and reinsert forcing the wizard to

reappear– Go to my computer, right click on the memory stick and

choose “AutoPlay”

Confirm you are using the "Scanner and Camera Wizard" and just click "Next".

All of your images SHOULD be selected. Only deselect if you are using your OWN camera and you have additional pictures on your card that you do NOT want on the school drive. If MORE are NOT going to

be copied, click Clear All…and select the ones to transfer.

There are THREE things that need to be changed at this step.

1. Type a name that ALL of your images will be named. VERY IMPORTANT!Do NOT just put Pictures…name it something very specific: Passport 2008 or Kayak July 2008

2. Change the location the photos will be store. Navigate to your P Drive. (see next slide)

3. Choose to "Delete pictures"...unless you are using your own camera.

If you do NOT change the name in step 1, you risk having multiple images with the same name. Name this VERY specific to what you shot.

1.Navigating to your P DriveClick on Browse, go to "My Computer“

Find the P Drive (if it is not present...you haven't mapped your P drive.

Go to your Picture folder (create one if you haven't already)

Create a new folder for your new pictures.

Notice it is naming each picture as I indicated…and adding a sequential number to the end of the name.

Click Next then Finish.You will be dropped into the folder of pictures.

Wizard will result in nicely named files. Vista version

will even rotate the

verticals and gives greater control over the naming.