member metal programs€¦ · e [email protected] | canada – all products rob dionisi-...
TRANSCRIPT
When making any contact, please identify yourself as a N.A.S.A. member.
MEMBER
METAL
PROGRAMS
as of February 1, 2016
When making any contact, please identify yourself as a N.A.S.A. member.
TABLE OF CONTENTS
I. Introduction
II. Metal Program Categories
III. Metal Program Descriptions
A. Aluminum & Stainless
B. CF Carbon & Alloy, HR Special Bar
C. Carbon Sheet
D. Carbon Plate
E. Carbon Flat roll
F. Expanded Metal & Grating
G. Minimill
H. Rebar
I. Tubing
J. Product Processing
K. Member Depots
When making any contact, please identify yourself as a N.A.S.A. member.
Metal Programs – Summary
Supplier Name Effective Date Products
1. Amico 10/1/98 Expanded Metal, Grating,
Stair Tread, Fiberglass, Perforated
Sheet
2. Arcelor Mittal-Bayou 5/1/02 Minimill, Beams
3. Arcelor Mittal 6/1/11 Carbon Flat roll Carbon Plate
4. Atlas Tube 7/1/98 Structural & Mechanical Tubing
5. Charleston Aluminum 12/1/02 Aluminum Bar, Sheet/Plate,
Extrusions
6. Essar Algoma 01/1/07 Carbon Plate & Flat roll
7. Gerdau Ameristeel 5/1/98 Merchant Bar, Beams, Structural,
Rebar * 20 ft. only on rebar
8. Gerdau Chaparral 4/1/05 Beams & Structurals
9. Hannibal Industries 4/1/00 Mechanical, Ornamental and
Structural Tubing
10. Independence Tube 1/1/08 Structural Tubing
11. Kentucky Electric 4/1/15 Minimill
12. Metal Partners Rebar 11/1/15 Rebar
13. New Dimension Metals 6/16/14 CF Carbon & Alloy Bar
14. NLMK Indiana 9/4/00 Carbon Flat roll
15. NLMK Pennsylvania 01/01/11 Galvanized Coil
16. Roanoke Electric Steel 5/1/01 Minimill, Beams, Rebar
17. Searing 02/01/11 Structural Tubing
18. Southland Tube 2/1/98 Structural, Mechanical Tubing &
Pipe
19. Steel Dynamics (Columbia City) 1/1/03 Beams & Structurals
20. Steel Dynamics (Butler) 03/1/09 Carbon Flat roll
21. Steel Dynamics (Techs) 03/1/09 Galvanized & Specialty Flat roll
22. Steel Dynamics (Columbus) 01/1/15 Carbon Flat roll
23. Steel of West Virginia 5/1/06 Minimill
24. SSAB 6/1/08 Carbon Sheet, Carbon Plate
25. TMK Ipsco Tubulars 1/1/99,6/1/08 Tubing, Pipe and Mechanicals
26. United Pipe & Steel 8/18/14 Specialty Pipe
27. Vulcan Steel & Wire 8/1/02 CF Carbon & Alloy Bar
28. Welded Tube of Canada 4/1/98 Structural & Mechanical Tubing
29. Wheatland Tube 4/1/07 Specialty Tubing
Depots
30. Camden Yard 2/1/10 Depot –Carbon Sheet
When making any contact, please identify yourself as a N.A.S.A. member.
ALUMINUM & STAINLESS
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 12-1-02, updated 6-28-04
Program Description:
Common Alloy and Heat Treated sheet and plate, Cold Finished and Extruded products.
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Willie Portnoy - President
Tarek Whittick – General Manager
Peter Sonne – Northern Regional Sales Manager
Jay Livingston – Southern Regional Sales Manager
Charleston Aluminum Trading Company, LLC
480 Frontage Road
Gaston, SC 29053
Tel: 803-939-4600
Fax: 803-939-0400
Email: [email protected]
www.charlestonaluminum.com
When making any contact, please identify yourself as a N.A.S.A. member.
CF CARBON & ALLOY
HR SPECIAL BAR
FORGED PRODUCTS
When making any contact, please identify yourself as a N.A.S.A. member.
New Dimension Metals
Effective: 6-16-14
Program Description:
Rounds- 1/4” to 4”
Hexagons- 5/16” to 2-1/4”
Squares- 7/16” to 2”
Flats- 1/2” by 1” to 1” by 4”
Special shapes made to customer specifications
Additionally one of New Dimension Metal’s sister companies is A-Lab Corp, an A2LA accredited laboratory and
NadCap accredited in Non Destructive Testing. With a strong partner such as A-Lab Corp, New Dimension Metals
is eager to assist you with any chemical, mechanical, metallurgical or non- destructive testing needs.
Contact Information:
Kerry Quatman
P: 800-462-6362
F: 937-299-6667
www.ndmetals.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 8-1-02
Program Description:
Cold Drawn/Cold Finished Carbon and Alloy Rounds: (1/8”-6”)
Cold Finished/Cold Drawn Hexagons/Squares: (3/8”- 3”)
Hot Roll and Cold Drawn/Cold Finished Heat Treated Bars: (3/8”-6”)
Industrial/Commercial Quality Rounds (Low Carbon): (1/8”-1/2”)
Contact Information:
Tommy Buchanan: (Vice President) (205) 620-5105/ [email protected]
Larry Wilson: (National Sales Manager) (205) 807-7984/ [email protected]
Cindy Locarno: (Inside Sales Manager) (205) 620-5114/ [email protected]
Website: www.vulc.com
When making any contact, please identify yourself as a N.A.S.A. member.
CARBON SHEET
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 01-06
Program Description:
Carbon Flatroll Products - see also Carbon Plate
Contact Information:
US
Jason Woods | Sales Representative - U.S. | Commercial
8430 W. Bryn Mawr Avenue Suite 900, Chicago, IL, United States 60631 |
T +1 - 773 - 639 2912 | F +1 - 773 - 243 3822 |
E [email protected] | www.essarsteelalgoma.com
Canada – All Products
Rob Dionisi- Director of Sales
Greg Tambori – Manager Central Canada & Michigan
If you purchase both coil and plate products, please contact either of the above sales teams and they will be able to
service your needs.
www.algoma.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 06-11-11
Program Description:
Carbon Flatroll Products - see also Carbon Plate
-Calvert City
Includes all U.S. locations (72” wide producer)
*does not include any directed buys (i.e. Caterpillar, Deere)
Contact Information:
If you do not know who your local contact is, Please contact the NASA Chicago office so we can assist you
847-783-4825
http://www.arcelormittal.com/corporate/
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 3-1-09
Program Description:
Flat rolled products: Hot rolled, floor plate, pickled, cold rolled, galvanized, galvanneal,
galvalume, pre-paint
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Flat Roll Group- Butler Division 4500 County Road 59 Butler, Indiana 46721 (260) 868-8000 (260) 868-8055 fax
Key Contact:
Charlie Trowbridge –Manager of Sales [email protected]
(260) 868-8000 (800) 799-8942 toll free (260) 868-8202 fax
www.steeldynamics.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective date: 1-1-15
Program Description:
Flat roll
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Key Contact: Don Switzer Sales Manager Steel Dynamics, Inc. Flat Rolled Group Columbus Division 1945 Airport Road | P.O. Box 1467 Columbus, MS 39701 P: 662.244.6768 | C: 513.509.5000 email: [email protected]
www.steeldynamics.com
When making any contact, please identify yourself as a N.A.S.A. member.
The Techs
Effective: 3-1-09
Program Description:
Galvanized & Specialty Flat rolled products
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Key Contact: Dave DiNardo- Manager of Sales
300 Mifflin Road
Pittsburgh, Pennsylvania 15207 (412)464-5000 x2207
www.steeldynamics.com
When making any contact, please identify yourself as a N.A.S.A. member.
NLMK PORTAGE
Effective: 9-4-00
Program Description:
Carbon Sheet products: .067-.750" gauge, 37.37-60" wide
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Rick Smith x229
6500 South Boundary Road
Portage, IN 46368
Tel: 219-787-8200
Fax: 219-787-8725
E-mail: [email protected]
www.us.nlmk.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 6-1-08
Program Description:
Carbon Sheet Products - see also Carbon Plate
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Christine Ovsenar
801 Warrenville Rd., Suite 800
Lisle, IL 60532
Tel: 630-810-4800
Fax: 630-810-4600
E-mail: [email protected]
www.ssab.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 1-1-2011- Sharon Coatings (Galvanized)
Program Description:
Hot Dipped Galvanized and Galvannealed products
Hot Rolled & P&O Coil Products- refer to their website for size ranges- Effective: 1-1-2015
Prime shipments only
Excess and secondary shipments excluded
Only invoices paid within Sharon Coating’s payment terms are eligible
All claim material is deducted from the shipment total
Contact Information:
Larry Romboski
277 Sharpsville Ave
Sharon, PA 16146
Tel: 724-983-6464
Fax: 724-982-4437
E-mail: [email protected]
http://www.us.nlmk.com/nlmk-pa/
When making any contact, please identify yourself as a N.A.S.A. member.
CARBON PLATE
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 06-11-11
Program Description:
Carbon Plate - see also Carbon Flat roll
Includes all U.S. locations
Included in this program are A-36 3/8 thru 3” and additional thicknesses of 3/16” -1/4”-5/16”
that will carry additional size extras. Also including grades:572 grade 50, PVQ’s and A514 grade
B carrying additional grade extra.
*does not include any directed buys (i.e.Caterpillar, Deere)
Contact Information:
If you do not know who your local contact is, Please contact the NASA Chicago office so we can assist you
847-783-4825
http://www.arcelormittal.com/corporate/
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 01-06
Program Description:
Carbon Plate Products - see also Carbon Flatroll
Contact Information:
US
Jason Woods | Sales Representative - U.S. | Commercial
8430 W. Bryn Mawr Avenue Suite 900, Chicago, IL, United States 60631 |
T +1 - 773 - 639 2912 | F +1 - 773 - 243 3822 |
E [email protected] | www.essarsteelalgoma.com
Canada – All Products
Rob Dionisi- Director of Sales
Greg Tambori – Manager Central Canada & Michigan
If you purchase both coil and plate products, please contact either of the above sales teams and they will be able to
service your needs.
www.algoma.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 6-1-08
Program Description:
Carbon Plate - see also Carbon Sheet
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Christine Ovsenar
650 Warrenville Rd., Suite 500
Lisle, IL 60532
Tel: 630-810-4800
Fax: 630-810-4600
E-mail: [email protected]
www.ssab.com
When making any contact, please identify yourself as a N.A.S.A. member.
EXPANDED METAL
& GRATING
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 10-1-98, Updated 01-01-15
Program Description:
Expanded Metal, Bar Grating, Plank Grating, Fiberglass, Stair Tread and Perforated Sheet
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Gene Laminack
Vice President Sales and
Marketing AMICO US
3245 Fayette Avenue
Birmingham, AL. 35208
O 205-787-2611
O 800-366-2642 ext. 106244
Roger Oberle
3245 Fayette Avenue, zip 35208
P.O. Box 3928
Birmingham, AL 35208-4822
Tel: 800-366-2642 or 205-787-2611
Fax: 205-780-3303
E-mail: [email protected]
www.amico-online.com
Glenn MacKay
Vice President and General Manager
Amico Canada Inc.
Direct: 289.313.2222
Toll Free: 800.663.4474
mobile: 905.570.2580
When making any contact, please identify yourself as a N.A.S.A. member.
MINIMILL
When making any contact, please identify yourself as a N.A.S.A. member.
BAYOU
Effective: 4-15-02, updated 01-01-08
Program Description:
Program is now available nationally. (effective 1-1-08)
Angles: 3/4” x 3/4” x 1/8” thru 7” x 4” x 7/8”
Flats: 1/4” x 1” thru 1/2” x 8”
Channels: [email protected]# thru [email protected]#
WF Beams: 4@13#, 6 x 9, 12, 16#
Standard Beams: [email protected]#, [email protected]#, [email protected]#, [email protected]#
Rounds: ½” thru 2” diameter
Squares: 1/2”, 5/8”, 3/4”, 1”
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Rich Rosinski
P.O. Box 5000
Laplace, LA 70069-1156
Tel: 800-535-7692
Fax: 985-652-8450 http://www.bayousteel.com/
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 5-1-98, updated 1-1-08
Program Description:
Merchant Bar, Beams, Structurals & Rebar * Canadian Rebar is excluded as well as shipments of
Bar Channels to all markets
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
United States Canada
Paul Pickett Dan Lay
Paul Mikolich
4221 West Boy Scout Blvd., Suite 600 Hopkins Street South
Tampa, FL 33607 Whitby, ON L1N 5T1
Tel: 800-237-0230 Tel: 800-263-2662 or 416-364-6136
Fax: 800-628-9931 Fax: 905-668-4536
E-mail: [email protected] E-mail: [email protected]
www.gerdauameristeel.com
When making any contact, please identify yourself as a N.A.S.A. member.
Chaparral
Effective: 5-1-98, updated 1-1-08
Program Description:
Beams and Structurals
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
CONTACT: Stan Baucum
Director - Wide Flange Beams, Piling & Bantam Beams
800-527-7979
www.gerdauameristeel.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 4-1-15
Program Description:
Kentucky Electric Steel is pleased to offer the following proposal to North American Steel
Alliance:
Our focus is on providing flat bar from 2 thru 12” wide up to 3” in thickness focusing more on
the wide flats, 7 thru 12” wide and on the thick sections, 1 ¼” – 3 in thickness, 2” – 8” widths.
In addition, we are able to offer many incremental sizes such ¼” and ¾” increments on width.
We offer a vast range of near square sizes as well from 2 x 2 ½ through 1 x 1 ½. Within the past
year, we have begun producing round bar, 2 7/8
thru 3 ¾” as well as squares in sizes 2” thru 2 ½”. Our intentions are to expand the round and
squares size range in the near future.
All of these products can be purchased in both merchant bar and special bar quality. We can
produce most of the flats in our dual grade specification- KES 50/36
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
CONTACT:
Office: 800-333-3012
www.kentuckyelectricsteel.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 5-1-01
Program Description:
Mini-Mill products, including standard and WF beams
Bar Angles: 1 x 1 through 2 1/2 x 2 1/2
Structural angles: 3 x 2 through 4 x 4
Structural channel: 3-8”
Flat bars: ¼ x 1 through 1 x 6
Strip: 3/16 x 1 ¼ through 3/16 x 3
Round bars: 5/8 through 1 ½
WF beams: 4 @ 13 through 8 @ 15
Standard beams: 3 @ 5.7 through 8 @ 23
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Parker Arthur – Sales Manager
Roanoke Electric Steel Corporation
102 Westside Blvd.
NW Roanoke, VA 24017
or P.O. Box 13948
Roanoke, VA 24038-3948
Tel: 800-753-3532 or 540-343-3628
Fax: 540-342-6610
E-mail: [email protected]
www.roanokesteel.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 05-01-06
Program Description:
Mini-Mill products, size range (inquire).
Contact Information:
Tom Sizemore
Jean Simmons
Steel of West Virginia
17th
Street and 2nd
Avenue
Huntington, WV 25703
Tel: 800-828-6849 or 304-696-8210
Fax: 304-697-5842
Email : [email protected]
www.swvainc.com
When making any contact, please identify yourself as a N.A.S.A. member.
COLUMBIA CITY
Effective: 1-1-03
Program Description:
Beams & Structurals
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Mike Busse
Steel Dynamics
Structural and Rail Division
2601 County Road 700 East
Columbia City, IN 46725
Tel: 260-625-8808
Fax: 260-625-8950
E-mail: [email protected]
www.stld-cci.com
When making any contact, please identify yourself as a N.A.S.A. member.
REBAR
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 11-1-15
Program Description:
Metal Partners Rebar is a national distributor and fabricator of rebar and concrete related products. They have
fabrication facilities in Bakersfield, CA; Chicago, IL; and Bala Cynwyd, PA. In addition, they carry rebar at over 20
stocking locations throughout the United States to keep product close to the customer base. Rebar is sourced both
domestically and direct import to bring the most competitive cost.
Stock sizes include #3 - #18 in 20’, 30’ 40’ and 60’ lengths in Grade 40, 60, A706, 75, 80 and MMFX. They also
carry rebar coils #3 - #5, GR60/A706/80. Epoxy coated rebar and dowel bars are stock items but can be made to
order depending upon DOT or spec requirements. Metal Partners Rebar is encompassed of a national sales team
with backgrounds ranging from the trading platform, steel mills and the downstream distribution channels to give
appropriate market guidance at all levels of the supply chain. Specific sales contact information will be available on
the NASA website shortly.
We are delighted to have Metal Partners Rebar as a new supplier to North American Steel Alliance.
Metal Partners Rebar
55 S Main St, Suite 394
Naperville, IL 60540
800-967-6630
www.metalpartnersrebar.com
When making any contact, please identify yourself as a N.A.S.A. member.
TUBING
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 7-1-98, updated 1-1-08
Program Description:
Squares: Through 12 sq x .625 wall
Rectangles: All corresponding sizes up to and include those with a 20" side
Rounds: Pipe size tube, 9" - 16" x .625
Program rebates are based on collective volume levels met in a given quarter. Call Miles
Donovan for details (847-783-4825).
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
United States:
Tom Muth
200 Clark Street
Chicago, IL 60633
Tel: 800-733-5683
Fax: 773-646-6128
E-mail: [email protected]
www.atlastube.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 4-1-00, updated 2-16-04
Program Description:
Tubing
Mechanical: from ½" round x .035 wall through 5" round to .250 wall.
Ornamental: from 1/2" x 1/2" through 2" x 2" walls .035 to .120 also in equivalent rectangles.
Hollow structurals: A500 Grade B and C from 1-1/4" x 1-1/4" to 4" x 4" square and rectangle
from .120 wall to .250 wall.
Contact Information:
Joe Battaglia- Tubular Product Sales
3851 Santa Fe Avenue
P.O. Box 58814
Los Angeles, CA 90058
Tel: 323-513-1212
E-mail: [email protected]
www.hannibalindustries.com
Blanton Bartlett- President
Tel: 323-513-1216
E-mail: [email protected]
Steve Roger- V.P. Sales
Tel: 323-588-4261
E-mail: [email protected]
.
When making any contact, please identify yourself as a N.A.S.A. member.
800-376-6000
Effective: 1-1-08
Program Description:
Mechanical and Structural Tubing
Serving North America from 3 locations
Chicago, Il Decatur, Ala. Marseilles, Il
Product range:
HSS ( A-500 ) 2x2x thru 12sq
2.5x1.5 thru 16x8
Walls range 1/8” thru 5/8”
Pipe ( A-500 ) 4.00” thru 12.75”
Rounds ( A-513 ) 4.00”, 5.00” and 6.00”
Piling ( A-252 ) 6.625” thru 12.75
Walls range 1/8” thru 5/8”
Value added services:
Bandsaw cutting and miter cutting
ID flash removing
Contact Information:
Dave Gast – Vice President of Sales
Mike Payne Inside Sales Manager
6226 West 74th
Street
Chicago, IL 60638
Tel: 800-376-6000
Fax: 708-563-1950
E-Mail: [email protected]
www.independencetube.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 2-1-11
Program Description:
Structural & Mechanical Tubing Products include: Mechanical tubing
Rounds ½’ thur 4” Gauges- 22ga thru .160 max
Squares and Rectangle ½” thru 3” Gauges- 20ga thru 11ga
Ovals per Inquiry
Finish’s Cold rolled, HRPO, HR, and Galvanized
Spec’s ASTM A-513 and A-500 Grade A and B
Structural tubing A-500 Grade B and C
Squares 1 ½” thru 6”
Rectangles 1 x 2 thru 8” x 4”
Pipe 1” thru 6”
Finish HR
Spec’s A-500 Grade B and C
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Jim Searing
8901 Arrow Route
Rancho Cucamonga, CA 91730
Tel: 909-948-3030
Fax: 909-466-0534
E-mail: [email protected]
When making any contact, please identify yourself as a N.A.S.A. member.
TUBULARS
Effective: 1-1-99, updated 6-1-08
Program Description:
Tubing
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Don Salis – District Sales Manager
TMK -Ipsco Tubulars
4900 N. Marine Drive
Chicago, IL 60640
Tel: 800-945-8936
Fax: 563-259-0236
E-mail: [email protected]
www.tmk-ipsco.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 2-1-98, updated 5-11-05
Program Description:
Hollow Structural & Welded Mechanical Tube and Pipe
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Joe Carley
John Montgomery
3525 Richard Arrington Jr. Blvd. N.
P.O. Box 2425 (Zip 35201)
Birmingham, AL 35234-2307
Tel: 800-543-9024 or 205-251-1884
Fax: 205-251-1553
E-mail: [email protected]
E-mail: [email protected]
www.southlandtube.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 4-1-98, updated 5-11-05
Program Description:
Hollow Structural & Welded Mechanical Tube and Pipe
Shapes from 5/8" to 12" sq.
Rounds from 3/4" to 16"
Wall thickness from .042 to .500"
Contact Information:
Local Sales Representative. For general information or to identify your local representative,
contact:
Andrew Weston - General Sales Manager, Structural
Butch Mandel - V.P. Commercial
111 Rayette Road
Concord, ON L4K 2E9
Tel: 800-565-8823 or 905-669-1111
Fax: 905-669-8570
E-mail: [email protected]
www.weldedtube.com
When making any contact, please identify yourself as a N.A.S.A. member.
MEMBER DEPOTS
When making any contact, please identify yourself as a N.A.S.A. member.
Locations: Camden, New Jersey ---- West Columbia, South Carolina
Capabilities
Precision Heavy Gage Leveling & Cut to Length –
o 16G – ½”up to and including 96” x Lengths up to 700”
Custom Shearing – 18 Gage up to 3/8” x Up to and including 14’ Long
Precision Slitting – 12 Gage – 29 Gage, >From .75” – 60” wide
Precision Blanking & Leveling - 12 Gage – 29 Gage, >From 10” – 72” wide
PRODUCTS
Hot Rolled – 16 GA. THRU ½”
o Diamond Plate – (14 ga. – ½ ) Tread Plate, Floor Plate, Checkered Plate, ASTM A786
o HRP&O: (Inquire)
Cold Rolled: Range 26ga thru 14ga
o Pre-Painted
Coated Galvanized , Galvanealed
Discrete Plate – 3/8” – 2” (Inquire)
Alan Kanoff
President
Camden Yards Steel Co. 856-342-7100 856-342-7088 Fax
When making any contact, please identify yourself as a N.A.S.A. member.
SPECIALTY PRODUCTS
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 4-1-07
Program Description:
Product: 1/8” - 6" A53-A and A53-B Steel Pipe
Contact Information:
Mark Magno
P.O. Box 600
900 Haddon Avenue
Collingswood, NJ 08108-0600
Tel: 800-333-5573
Fax: 856-854-0616
E-Mail: [email protected]
www.wheatland.com
When making any contact, please identify yourself as a N.A.S.A. member.
Effective: 8-18-14
Program Description:
Domestic and Import A53 Steel Pipe
Contact Information:
Greg Leidner
800-777-7473
83 Turnpike Rd.
Ipswitch, MA 01938