medical devices blood bank refrigerators and...

MED

ICAL

DEV

ICES

Bloo

d ba

nk re

frige

rato

rs an

d fre

ezer

s

ANGELANTONI LIFE SCIENCE offers a wide range of blood bank refrigerators, rapid freezers for plasma and freezers to satisfy the requests of small, medium and large Transfusion Centres, Hospitals, Care Homes and Analysis Laboratories.

This catalogue introduces our complete line of +4°C blood bank refrigerators, -40°C and -85°C freezers to preserve blood and its by-products and the Plasmafrost line for rapid freezing of plasma.

All our equipment is certifi ed according to the Directive for Medical Devices 93/42/EEC and subsequent amendments, and shows our company is fully committed to manufacturing top quality, reliable products and can guarantee maximum safety for the storage of blood and its by-products.

2460

Blood bank refrigerators /BBR & Mini Series

There are two available lines of blood bank refrigerators: Mini line with blood bags capacity from 48 to 120 units BBR line with blood bags capacity from 250 to 700 units

Maximum temperature uniformity

Low power consumption

Completely extractable stainless steel sliding drawers*

Service door with safety key lock

Anti-tip body system when the service door opens

BBR is designed to contain accidental liquid spills

Microprocessor control board with indipendent alarm section

Very low noise level

*BBR / B are equipped with shelves instead of drawers.

3

4

External body: in zinc plated steel powder coated to ensure durability and bacteria resistance. The interiors of the MINI are zinc plated steel and white coated while all BBR are made of stainless steel AISI 304. All blood bank refrigerators have rounded interiors corners for easy cleaning. The bottom of the BBR is made specifi cally to catch any accidental liquid spills. The body shell is equipped with an anti-tip system when the service door opens. The MINI models can be supplied on request with an internal, stainless steel cover.All models can be supplied on request with an outer, stainless steel cover.Doors: to guarantee top quality performance, the three-layered, vacuum glass doors have special, anodised aluminium profi les and electric heating elements to avoid condensate formation. Keyed lock to prevent access by unauthorised personnel.Porthole: with 23 mm diameter and external rubber cap for insertion of additional probes, it is standard on all models.Internal lighting: automatically switches on when the door opens (external pushbutton to switch on manually).Insulation: by injected CFC-free polyurethane foam.Drawers: made of stainless steel. They are telescopic and moving on wheels. The drawers are also equipped with a transparent front protection panel to reduce the entering of warm air while the main door is open and to facilitate the content view too. As option, the drawers can be equipped with internal dividers that helps for bags positioning and facilitate the labels reading.Temperature chart recorder: battery-operated, equipped with a key locked door, weekly circular graph, ink cartridge, temperature range from +30°C to -30°C.The controller is dual microprocessor based: one section controls the cooling system hence the internal temperature while the second section, independent, controls all the alarms and the displays. The controller is battery buffered by a self-recharging 12 VDC battery to supply energy to the electronics up to 48 hours in case of main power black-out. As standard, the controller is equipped with free contacts for remote alarms and has the predisposition for Ethernet connection (Ethernet request additional parts, see optional accessories).

Technical features

BBR 850/8

Blood bank refrigerators /BBR & Mini Series

Equipment certifi ed according to 93/42/EEC directive and following amendments

Operating temperature: +4°C.

Wooden cage package for MINI 250

5

MINI 250/4 and MINI 130/2

Standard controller for all the MINI / BBR models

NOTES: Power supply: 230 Volt, 50 Hz single phase. Max current drawn: 3A for MINI models and 5,5A for BBR models. Noise level: < 45(dbA). All models can be manufactured on request with special power supplies without the Medical Device EEC 93/42 certifi cation. On request BBR models may be equipped with a fully redundat double cooling system.

12279

10235

12870

13804

17023

11869

17094

12124

17024

17038

17039

12132

11676

Code

Code

Code

Description

Description

Description

Kit for chart recorder (100 discs, 2 pens)

Set of internal dividers for one drawer

PVC internal divider for BBR 700/ 1500 drawers

Ethernet board connection (requires CRYOLOG SW)

Wooden cage package for MINI 130

PVC internal divider for BBR 850 drawers

Wooden cage package for BBR 850

CRYOLOG monitoring sofware for Windows computer (requires Ethernet connection)



Additional certifi ed PT 100 temperature probe, class A with 3 calibration points

Additional PT 100 temperature probe class A

Optional accessories for all MINI and BBR series

Optional accessories only for MINI series

Optional accessories only for BBR series

Technical specifi cations

700

2

5

6

8

14(shelves)

14

8

4

5

9(shelves)

7

9

12

7(shelves)

Code

13263

13265

13267

13270

13527

13273

13269

13264

13266

13526

13268

13271

13272

Model

MINI 130/2

MINI 250/5

BBR 700/6

BBR 850/8

BBR 1500/B

BBR 1500/14

BBR 700/8

MINI 250/4

BBR 700/5

BBR 850/B

BBR 700/7

BBR 850/9

BBR 1500/12

Operating range

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

from 0° to +10°C

Doors Drawers

1

1

1

1

2

2

1

1

1

1

1

1

2

Bagscapacity450 ml

Nominal volume

(l)

130

250

700

850

1500

1500

700

250

700

850

700

850

1500

96

250

500

350

702

600

Interiordimensions

WxDxH (mm)

520x450x560

520x450x1110

590x675x1500

660x875x1510

1330x675x1500

1330x675x1500

590x675x1500

520x450x1110

590x675x1500

660x875x1510

590x675x1500

660x875x1510

1330x675x1500

Exteriordimensions

WxDxH (mm)

600x640x1280

600x640x1850

740x865x1998

810x1060x1998

1480x865x1998

1480x865x1998

740x865x1998

600x640x1850

740x865x1998

810x1060x1998

740x865x1998

810x1060x1998

1480x865x1998

Packagedimensions

WxDxH (mm)

640x680x1430

640x680x2000

760x900x2170

960x980x2170

1500x950x2170

1500x950x2170

760x900x2170

640x680x2000

760x900x2170

960x980x2170

760x900x2170

960x980x2170

1500x950x2170

Net weight*with pack

90 *105 Kg

125 *140 Kg

235 *255 Kg

290 *316 Kg

360 *380 Kg

455 *480 Kg

245 *265 Kg

120 *135 Kg

225 *240 Kg

240 *260 Kg

240 *260 Kg

298 *323 Kg

445 *470 Kg

48

120

300

624

800

400

13525 BBR 700/Bfrom 0°

to +10°C 1 700 590x675x1500 740x865x1998 760x900x2170 200 *215 Kg400

Freezer /KRYOS MD 500, -40°C freezer for plasma storage

KRYOS MD500

• Up-right freezer with 500 liters capacity

• Temperature range from -20°C to -40°C

• Storage capacity up to 360 plasma bags of nominal 450 ml

• Including fourteen plastic drawers

• Weekly disc chart recorder

• Static cooling system with evaporator placed on shelves

• Service door with safety key lock

• Insulation with injected CFC-free PU foam - minimum 70 mm thickness

• Interior easy-to-clean in ABS

• Microprocessor control board with independent alarm section


Operating temperature: -20°/-40°C

13804

17132

12132

12124

Code Description


Wooden cage package

Additional PT 100 temperature probe, class A with 3 calibration

CRYOLOG monitoring software (Windows) - requires Ethernet connection

Optional accessories for all the KRYOS MD 500

6


13543KRYOS MD

500from -20° to -43°C 1 14 500 615x550x1500 745x740x1950 840x770x1970 143 *160 Kg360

Code Model Operating

rangeDoors Drawers

Bagscapacity450 ml

Nominal volume

(l)

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

Packagedimensions

WxDxH (mm)


NOTES: Power supply: 230 Volt, 50 Hz single phase. Max current drawn: 3,5 A Noise level: < 47(dbA). All models can be manufactured on request with special power supplies without the Medical Device EEC 93/42 certifi cation.

12282

13233

Kit for chart recorder (100 graph diagram and 2 pens)


12680

11976

BIOGUARD, door card openining system

Additional user badge for BIOGUARD system

Freezers /Platinum & Iridium, -40°C and -86°C freezers for plasma storage and red blood cells storage

• Up-right freezer and chest freezer with up to 800 liters capacity

• Storage capacity up to 900 plasma bags of nominal 450 ml

• Low power consumption

• Exteriors are made of zinc plated steel powder coated

• Interiors are made of stainless steel AISI 304

• Up-right freezer equipped with inner doors

• Adjustable shelves in stainless steel

• Weekly disc chart recorder or digital recorder (Next model)

• Footprint optimisation for the IRIDIUM models, thanks to the VIP technology

• Upright versions can be equipped with optional stainless steel telescopic drawers

• Microprocessor control board with independent alarm section

• Access control with patented opening system BIOGUARD (optional)

Detail of telescopic drawer BIOGUARD, key card door opening system

PLATINUM 500SV with optional drawers


Operating temperature: -20°/-45°C.

7

Operating temperature: -50°/-86°C.

PLATINUM PU Insulation


8

NOTES: Power supply: 230 Volt, 50 Hz single phase. Max current drawn: 7A for 340/500/370/550 models and 9A for 520/800 models. Noise level: < 52(dbA). All models can be manufactured on request with special power supplies without the Medical Device EEC 93/42 certifi cation.

Code Model Operating

rangeInner doors Shelves

Bagscapacity450 ml

Nominal volume

(l)

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

Packagedimensions

WxDxH (mm)


2

2

2

13279

13287

13283

PLATINUM 340 SV

IRIDIUM800 SV

PLATINUM 500 SV

from -20° to -45°C

from -20° to -45°C

from -20° to -45°C

3

3

3

346

811

538>500

450x570x1350

906x609x1470

700x570x1350

765x900x1985

1150x895x1985

1015x900x1985

800x950x2150

1151x990x2120

1080x1000x2120

214 *245 Kg

330 *360 Kg

262 *293 Kg

>400

>900

no

no

no

13278

13277

PLATINUM 550 SH

PLATINUM 370 SH

from -20° to -45°C

from -20° to -45°C

4

3

550

370>350

1590x520x670

1050x520x670

2350x855x1140

1780x855x1140

2380x970x1300

1850x970x1300

275 *255 Kg

234 *274 Kg

>600

13276PLATINUM

110 SHfrom -20° to -45°C 1 110 450x560x450 730x850x1080 800x1020x1270 150 *175 Kg>150

12282

17040

11204

11202

12680

17041

11205

11203

11835

11878

17044

13007

13005

11976

17042

13006

13004

17043

11836

11879

17055

12124

12132

13804

13233

Description

Kit for chart recorder (100 discs, 2 pens)

Wooden cage package for PLATINUM 110SH

Stainless steel internal shelf (Max 10) for PLATINUM 340SV

SS sliding telescopic drawer (Max 9) for PLATINUM 340SV



Stainless steel internal shelf (Max 10) for PLATINUM 500SV

SS sliding telescopic drawer (Max 9) for PLATINUM 500SV

SS grid shelf for mixing with drawers (see Note 1) for PLATINUM 340SV

Set of internal dividers for one drawer code 11202 (PLATINUM 340SV)

Wooden cage package for PLATINUM 500SV

SS grid shelf for mixing with drawers (see Note 1) for IRIDIUM 800SV

Set of internal dividers for one drawer code 13004 (IRIDIUM 800SV)



Stainless steel internal shelf (Max 10) for IRIDIUM 800SV

SS sliding telescopic drawer (Max 12) for IRIDIUM 800SV

Wooden cage package for PLATINUM 340SV

SS grid shelf for mixing with drawers (see Note 1) for PLATINUM 500SV

Set of internal dividers for one drawer code 11203 (PLATINUM 500SV)

Wooden cage package for IRIDIUM 800SV

CRYOLOG monitoring software (Windows) - requires Ethernet connection




Optional accessories

Code

Cryolog software

9


NOTES: Power supply: 230 Volt, 50 Hz single phase. Max current drawn: 7A for 340/500/370/550 models and 9A for 520/800 models. Noise level: < 52(dbA). All models can be manufactured on request with special power supplies without the Medical Device EEC 93/42 certifi cation.

13387

13401

13385

13391

13384

PLATINUMNEXT 340V

IRIDIUM NEXT 520V

PLATINUMNEXT 550H

PLATINUMNEXT 500V

PLATINUMNEXT 370H

from -50°to -86°C

from -50°to -86°C

from -50°to -86°C

from -50°to -86°C

from -50°to -86°C

4

4

4

4

3

2

2

no

2

no

346

528

550

538

370

>500

>350

450x570x1350

586x613x1470

1590x520x670

700x570x1350

1050x520x670

765x900x1985

780x900x1985

2350x855x1140

1015x900x1985

1780x855x1140

800x950x2150

880x950x2150

2380x970x1300

1080x1000x2120

1850x970x1300

214 *245 Kg

260 *290 Kg

275 *324 Kg

262 *293 Kg

234 *274 Kg

>400

>520

>600

13396IRIDIUM

NEXT 800Vfrom -50°to -86°C 5 2 811 906x609x1427 1115x900x1985 1151x990x2120 364 *389 Kg>900

Code ModelOperating

rangeInnerdoors

Shelves Bags

capacity450 ml

Nominal volume

(l)

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

Packagedimensions

WxDxH (mm)


11352

12293

12680

11976

13233

7-days temperature chart recorder (pern+diagrams for 1 year)

Kit for chart recorder (100 graph diagram and 2 pens)




Optional accessories

12124CRYOLOG monitoring software (Windows) - requires Ethernet connection


12278

12107

17042

17041

CO2 back-up system (complete of battery, tubing and probe) for IRIDIUM Next 520VLN2 back-up system (complete of battery, tubing and probe) for PLATINUM Next 340V, 500V and IRIDIUM Next 520V, 800V

Wooden cage package for PLATINUM Next 550H

Wooden cage package for PLATINUM Next 370H

11930

11205

13349

11204

13006

CO2 back-up system (complete of battery, tubing and probe) for PLATINUM Next 340V, 500V and IRIDIUM Next 800V

Stainless steel internal shelf (Max 10) for PLATINUM Next 500V

Stainless steel internal shelf (Max 10) for IRIDIUM Next 520

Stainless steel internal shelf (Max 10) for PLATINUM Next 340V

Stainless steel internal shelf (Max 10) for IRIDIUM Next 800V

12132

Set of internal dividers for one drawer IRIDIUM Next 800V13005

Set of internal dividers for one drawer PLATINUM Next 500V

Set of internal dividers for one drawer IRIDIUM Next 520V

SS sliding telescopic drawer (Max 8) for IRIDIUM Next 520V

Set of internal dividers for one drawer PLATINUM Next 340V

SS sliding telescopic drawer (Max 8) for PLATINUM Next 500V

SS sliding telescopic drawer (Max 8) for IRIDIUM Next 800V

11879

13352

13351

11878

11203

13004

11202 SS sliding telescopic drawer (Max 8) for PLATINUM Next 340V

Wooden cage package for IRIDIUM Next 520V

Wooden cage package for IRIDIUM Next 800V

Wooden cage package for PLATINUM Next 500V

17133

17055

17044

11835

13350

13007

SS grid shelf for mixing with drawers for PLATINUM Next 340V

SS grid shelf for mixing with drawers for IRIDIUM Next 520V

SS grid shelf for mixing with drawers for IRIDIUM Next 800V

11836 SS grid shelf for mixing with drawers for PLATINUM Next 500V

Wooden cage package for PLATINUM Next 340V17043

Code Description Code Description

Telescopic drawer

Plasma blast freezers /Plasmafrost, Plasmafrost I.Te.M. series

PLASMAFROST standardPLASMAFROST I.Te.M

Plasmafrost are designed for quick plasma freezing to get best recovering of proteins and coagulation factors after fractionation.Besides, all Plasmafrost comply with the EU Recommendation No. R (95)15 that applies for best practicing on plasma processing.

The PLASMAFROST models can reach a temperature of -30°C in the centre of the bag in less than 60 minutes. The freezer automatically

stops after 60 minutes at the end of the freeze cycle.

The PLASMAFROST I.Te.M. models have a PC installed to read the bag barcode. The machine can calculate the time required to bring

the bags to -30°C. The machine stops automatically when it reaches this value and is ready to receive the next batch. A report can

be printed to certify the correct freezing process.

10

PLASMAFROST freeze the bags laying in horizontal position within 60 minutes as recomended as all International Standards.

Horizontal freezing for the best freezing uniformity

Maximum freezing effi ciency thanks to the innovative cooling plates

Complete fl exibility to freeze different types of plasma bags.

Ergonomic and user friendly.

Compliant with the European Plasma Master File (PMF).

Increased productivity thanks to fast recovery set temperature

Validation and Traceability of the freeze cycle.

Voice synthesizer for easy use and error free (Plasmafrost I.Te.M.)

•

•

•

•

•

• L

LL COMPUTER

VALID

ATION

AND

FREEZIN

G

REPORT

L

•

•

•

Working temperature is -75°CFrame: is made by fully metallic heavy-gauge phosphate-coated steel plate, powder-painted.Assembled on 4 wheels for easy moving. The internal chamber is made of stainless steel.Door: has a key lock and silicone seals.Thermal insulation: is guaranteed by its”Sandwich technique” with injected CFC-free polyurethane foam with 125 mm average thickness.Cooling system: uses refrigerated shelves and anodised, aluminium, uniformity plates that guarantee maximum performance. The refrigerant fl ows inside the shelf to maximise refrigerating effi ciency and the uniformity plates in contact with the bags guarantee exceptional temperature uniformity. The system used consists of a mechanical cascade system with two hermetic/semi-hermetic compressors (PLASMAFROST 4) and an air condenser.Control panel: is placed on the front of the equipment, clearly visible for the operator; equipped with an on/off switch with light; acoustic and visual end-of-freeze cycle indicator; maximum alarm for high pressure in the high/low stage refrigerant circuit; digital display to show internal temperature; main switch placed on the left-hand side of the machine.Software: The PLASMAFROST I.Te.M. models have an integrated computer with dedicated software, which enables you to certify the success of the plasma freeze process. The intuitive user interface enables the user to carry out the necessary operations very quickly and safely. The software has an exclusive system with a specifi c mathematical algorithm developed by ALS, which guarantees the freeze process and measures the temperature inside the plasma bags. This exclusive system from Angelantoni enables the freeze process for each plasma bag to be managed and accurately traced. The system is password protected and at the end of each freeze cycle, the software issues a report (PDF fi le) with all the relevant data, such as the plasma bag ID, the date and time of freezing, which enables the successful freeze cycle to be certifi ed. Each cycle is enabled with the identifi cation of the operator (a barcode reader is included in the standard package) and the ID of each plasma bag loaded inside the freezer. All the data can be transferred via an Ethernet connection, USB port or txt fi le.

Technical features

PLASMAFROST 4 I.Te.M.

Example of report issued by the I.Te.M. software

11

Loaded with 40x450ml bags, fi lled 250 ml Loaded with 40x450ml bags, fi lled 300 ml or 16x1000ml bags, fi lled 650 ml

(freezing curves are the same)

Loaded with 40x400ml bags, fi lled 300 ml or 12x1000ml bags, fi lled 800 ml

(freezing curves are the same)

Loaded with 40x400ml bags, fi lled 250 ml

0°

5°

10°

15°

20°

-5°

-10°

-15 °

-20°

-25°

-30°

-35°

B

0°

5°

10°

15°

20°

-5°

-10°

-15 °

-20°

-25°

-30°

-35°

C

0°

5°

10°

15°

20°

-5°

-10°

-15 °

-20°

-25°

-30°

-35°

TIME

D

Mean typical freezing curves of Plasmafrost 4

45 min

0°

5°

10°

15°

20°

-5°

-10°

-15 °

-20°

-25°

-30°

-35°

A


11521

12132

17054

Code Description

Single channel microprocessor graphic recorder


Wooden cage package for PLASMAFROST series

Optional accessories for all PLASMAFROST series

TIME

TIME

30 min

35 min

TIME

55 min

12

Bags loading of PLASMAFROST

Code

13274

13296

13275

13204

ModelsOperating

range

da -50°a -80°C

da -50°a -80°C

da -50°a -80°C

da -50°a -80°C

Shelves

3

4

3

4

Bagscapacity450 ml

Bagscapacity1000 ml

Freezing time for 450ml bags

at -30°C

Freezing time for 1000ml bags

at -30°C

30 min 45 min

30 min 45 min

30 min 45 min

30 min 45 min

24 12

40 16

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

895x1490x1760

895x1490x1760

895x1490x1760

895x1490x1760

Packagedimensions

WxDxH (mm)

920x1515x2000

920x1515x2000

920x1515x2000

920x1515x2000


625 *658 Kg

675 *708 Kg

645 *678 Kg

690 *725 Kg

24 12

40 16

13368da -50°a -80°C 3 30 min 45 min 895x1490x1760 920x1515x2000 660 *695 Kg24 12

PLASMAFROST 3 STD

PLASMAFROST 4 STD

PLASMAFROST 3 STD



600x565x770

600x565x770

600x565x770

600x565x770

600x565x770

NOTES: Power supply: 230 Volt, 50 Hz single phase for Plasmafrost 3 and Plasmafrost 3 I.Te.M. 400 Volt, 50 Hz three phase for Plasmafrost 4 and Plasmafrost 4 I.Te.M. Max current drawn: 12A for Plasmafrost 3 16A for Plasmafrost 4 All models can be manufactured on request with special power supplies without the Medical Device EEC 93/42 certifi cation.

Refrigerator cabinets and prefabricated cold chambers /PE series

Large capacity prefabricated blood bank refrigerator line

Large capacity prefabricated freezer line to store frozen plasma

Angelantoni Life Science manufactures large capacity cold chambers and prefabricated cabinets to fulfi l the requests of large Transfusion Centres and Hospitals.

Structure: built with prefabricated, zinc-coated, steel plate panels which guarantee maximum duration over time for these uses.A stainless steel coating is available on request. Doors: with the same features as the main structure, with anticondensate electric resistors to avoid the formation of condensate. Keyed lock to prevent access by unauthorised personnel.Internal lighting: it automatically switches on when the door opens. External pushbutton to switch on manually.Thermal insulation: obtained by injecting CFC free polyurethane foam (Sandwich technique).Insulation thickness of prefabricated cabinets: 60 mm for models to +4°C and 120 mm for models to -30°C.Insulation thickness of cold chambers: 80 mm for models to +4°C and 120 mm for models to -30°C.Refrigerating system: consisting of a highly effi cient and reliable, semi-hermetic compressor and ventilated evaporator to guarantee maximum uniformity of the temperature inside the prefabricated cupboard. The condenser unit can be made to be remotely controlled. These pieces of equipment can be equipped with a double refrigerating and electrical reserve system to guarantee continual operation (optional). Internal accessories: the cabinets are equipped with internal, height adjustable shelves. The cabinets can be fi tted with smooth-running, extractable, 304 stainless steel drawers, equipped with telescopic rails. The transparent PVC front panel of the drawers enables the contents to be viewed immediately, and prevents heat re-entering when the door is opened. Special optional PVC dividers can be ordered for each drawer to facilitate the positioning of the bags inside the blood bank and to make reading of the labels easier during withdrawal.The prefabricated cold chambers can be equipped with internal shelving on request.Temperature chart recorder: battery-operated, equipped with a key locked door, weekly circular graph, ink cartridge.Regulation and control system: microprocessor electronic board, with two completely independent sections, one to regulate the temperature and the other to manage the alarm system and display the temperature. Buffer battery with automatic recharge (12V, 2Ah) to guarantee alarms are maintained for up to 48 hours in the event of a blackout. The system can repeat alarm signals remotely. Optional Ethernet port.


Large capacity blood bank refrigerators and freezers (from 3 to 20 mc)

13



Code

13452

13454

13458

13453

13457

13456

ModelOperating

range

from 0°C to +10°C

from 0°C to +10°C

from -10°C to -30°C

from 0°C to +10°C

from -10°Cto -30°C


Doors Shelves

3

5

5

4

4

3

Nominal volume (l)

Insulation thickness

(mm)

3000

5000

5000

4000

4000

3000

16

16

60

120

12 120

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

2520x870x2150

4120x870x2150

4240x990x2300

3320x870x2150

3440x990x2300

2640x990x2300

Netweight

(Kg)

200

300

420

245

350

280

12 60

20

20

60

120

13455

13459

from 0°Cto +10°C


6

6

6000

6000

4920x870x2150

895x1490x1760

355

490

24

24

60

120

PE 2003 TN-MD

PE 2005 TN-MD

PE 2105 LT-MD

PE 2004 TN-MD

PE 2104 LT-MD

PE 2103 LT-MD

PE 2006 TN-MD

PE 2106 LT-MD

2400x750x2030

4000x750x2030

4000x750x2030

3200x750x2030

3200x750x2030

2400x750x2030

4800x750x2030

4800x750x2030

Current drawn(A)

6

6

6,5

6

6,5

6,5

6

6,5

NOTES: Power supply: 400 Volt, 50 Hz three phase

13460

13462

13461

13465

13464

from 0°C to +10°C

from 0°C to +10°C

from 0°C to +10°C



1

1

1

1

1

10000

21000

15000

19000

15000

80

120

120

2060x2400x2590

3400x2960x2590

2960x2400x2590

3140x3040x2680

3140x2400x2680

410

640

520

850

750

80

80

13463from -10°C

to -30°C 1 10000 2140x2400x2680 540120

PE 2610 TN-MD

PE 2621 TN-MD

PE 2615 TN-MD

PE 2621 LT-MD

PE 2615 LT-MD

PE 2610 LT-MD

1900x2240x2430

3240x2800x2430

2800x2240x2430

2900x2800x2440

2900x2160x2440

1900x2160x2440

6

6

6

9,5

9,5

9,5

NOTES: Power supply: 400 Volt, 50 Hz three phase

Code ModelOperating

doorsDoors

Nominal volume (l)

Insulation thickness (mm)

Interiordimensions

WxDxH (mm)

Exteriordimensions

WxDxH (mm)

Netweight

(Kg)

Current drawn(A)

14

Standard controller for MINI, BBR, KRYOS 500 MD and -40° PLATINUM / IRIDIUM

Intelligent controller for PLATINUM Next, IRIDIUM Next and PLASMAFROST I.Te.M.

Microprocessor electronic board, with two completely independent sections, one to regulate the temperature and the other to manage the alarm system and display the temperature. The system is equipped with a buffer battery with automatic recharge (12V, 2Ah) to guarantee alarms are maintained for up to 48 hours in the event of a blackout. The system can repeat alarm signals remotely. The system can be provided with an Ethernet port (optional), which enables the CRYOLOG software to be connected (see additional accessories provided on request).

The Cold Brain™ microprocessor-operated command and control system uses multiple, top quality sensors (4 PT100 and 3 NTC); an effective, fl exible alarm system guarantees the plasma and its by-products are controlled in complete safety. Wide graphic display (240×128 pixel) with capacitive touch keyboard. Microprocessor-operated electronic board has two completely independent sections, one to regulate the temperature and the other to manage the alarm system and display the temperature. Data recorder integrated in the board: the traditional paper chart recorder has been replaced by an electronic recorder. The operational parameters and the alarms are saved once a minute for 3 months.

Cooling system:

• Temperature setting• Temperature display• Manual or automatic defrost• Internal lighting ON/OFF (only MINI and BBR)• Cooling system ON/OFF

Cooling system:

• Temperature setting• Temperature display• Cooling system ON/OFF• Full system diagnostic view by four Pt100 and three NTC probes• Temperature graph on display of last twelve weeks• Password protected memory card (SD) for graphs and alarms storage• Ethernet port with confi gurable TCP/IP address• Ready to be used with CRYOLOG Data Management Software• Ready for CO2 / LN2 back-up system (only for -86°C Freezers)• Electronics battery back-up (provide energy up to 48h)

Alarms section:

• Alarms setting• Hi-Low temperature• Minimum and maximum temperature alarm• Door ajar• Flat battery alarm• Acoustic and visual alarms

Alarms section:

• Alarms setting• Hi-Low temperature• Full alarms logging• Door ajar• Main power-off• Acoustic and visual alarms• Led alarm status• Remote alarm status• Compressor failure• Probes failure• Battery level low• BIOGUARD failure (if installed, see options)

ColdBrain™

Equipment /Controllers

15

Copyright © 2017 Angelantoni Life Science S.r.l. / Rev. 03/2017 - Illustration, description and technical data may be changed without notice.

Angelantoni Life Science S.r.l.HEADQUARTERLocalità Cimacolle, 464 - 06056 Massa Martana (PG) ph. (+39) 075.89551 (a.r.) - fax (+39) 075.8955312MILAN BRANCHViale Monza, 291 - 20126 Milano (MI)ph. (+39) 02.939701.1 - fax (+39) 02.93970123

[email protected] www.angelantonilifescience.it

ALS is one of the worldwide leading manufacturers of biomedical refrigeration, non contamination and sterilization equipment constantly committed to innovation and to environ-mental or biological safety.

Research centres, hospitals, universities, chemical and pharmaceutical companies are ALS Customers: our company can satisfy any requirement of scientifi c refrigeration, infection Control (autoclaves) and microbiological safety through a wide range of standard and special products.

In this fi eld we can offer now a complete range of equipment and services to meet the needs of sterilization (CSSD), disinfection stations (CSDD) and special applications BSL3 laboratories - BSL4 and treating infected wastes (Biohazard).

ALS can be an ideal partner in Science and Technology due to a wide range of products and to the market presence in more than 50 Countries with local Agents and Distributors.

ALS invests more than 5% of its turnover in research and development involving a multidisciplinary team of scientists that support clients with cutting-edge, standard and custom-ized solutions in terms of quality, reliability and innovation.

ALS is a subholding of Angelantoni Industrie Group established in 1932, worldwide known for innovation, R&D and high tech such as climatic chambers and space simulators (Angelantoni Test Technologies), spattering machines for thin fi lm technology (Kenosistec), solar receiver tubes for concentrated solar power plants ( Archimede Solar Energy) refrigeration turbo devices for ener-gy saving (Turboalgor) in addition to ALS advanced and patented products such as Hemosafe, Smartfreezers and Waster.

Angelantoni sites

medical devices blood bank refrigerators and...

Documents