Slide 1

Slide 2

Slide 3

Mechanism presencial vote a) Board Box president secretary first teller second teller Three general substitutes b) Election Observers c) Representatives of political parties and independent candidates

Slide 4

Mechanism presencial vote Installing box

Slide 5

Mechanism presencial vote Opening the election day 07:30 hs 18:00 hs 08:00 hs

Slide 6

Mechanism presencial vote Reception of citizens to vote

Slide 7

Mechanism presencial vote Location of citizen Marking nominal list

Slide 8

Mechanism presencial vote Suffrage vote

Slide 9

Mechanism presencial vote They deposit the ballots in the ballot box

Slide 10

Mechanism presencial vote Marked badge Placing indelible ink and return of the citizen voter

Slide 11

Monitoring Election Day : SIJE The data will be received and captured at the headquarters of the district boards executive of the Institute, and transmitted through the redine for consultation, in real time, by the General, local and district Councils INE and the corresponding OPL.

Slide 12

Features ballot Measures 22 x 28. Type of choice. Removable numbered stub. Emblems of political parties. Signatures Director Chairman and Executive Secretary. Printed on security paper 90g.

Slide 13

Ballot and security measures Latent image (front ) Water seal with the national emblem (front ) 22 x 28 cm Visible and hidden optical fibers Printing inverted microprint Using invisible ink INE E N T I D A D

Slide 14

Polling and counting Mechanism presencial vote

Slide 15

A vote for independent candidate A vote for the candidate NOT registered A vote for only one candidate A vote for a coalition Valid votes for political parties

Slide 16

Mechanism presencial vote Invalid ballots for political parties In overturning the ballot Mark two candidate does not coaligados

Slide 17

Mechanism presencial vote Sdfghj cdcfdas NO

Slide 18

Mechanism presencial vote Sdfghj cdcfdas 200 9 50 50 50 50 50 50 50 50 50 9 9 14 9 50

Slide 19

Mechanism presencial vote

Slide 20

Slide 21

Slide 22

The night of the election day results seated in each tally and count box will be captured in the System Registry Records

Slide 23

Absentee voting mechanism Citizens residing abroad may exercise their right to vote for: President of the United States of Mexico Senators Governors of the states Head of Government of the Federal District, In so far as determined by the Constitutions of the States or the Statute of the Federal District. Art. 329 LGIPE Vote of Mexicans Abroad

Slide 24

Slide 25

Absentee voting mechanism. Postal vote Delivery ballot in person at consulates or embassies Art. 329 LGIPE In the terms determined by the Institute

Slide 26

Absentee voting mechanism. E-voting According to the guidelines issued by the Institute, they should ensure that complete certainty and proven security. Art. 329 LGIPE

Slide 27

Slide 28

Voting mechanism abroad Filling the Application for entry to the Nominal List of Voters Abroad.

Slide 29

Voting mechanism abroad Shipping and forwarding Electoral Postal Package citizen

Slide 30

Voting mechanism abroad Is the reception, registration, classification and receipt of envelopes with ballot.

Slide 31

Voting mechanism abroad On the day of open tables that receive voting envelopes to perform the calculation.

Slide 32

Voting mechanism abroad Is completed and supplied to each state the minutes and counting.

Slide 33

Slide 34

Electronic voting mechanism Location of the citizen in the list nominal Marking nominal list " VOTED "

Slide 35

Access to electronic voting Enabling Electronic Ballot Electronic voting mechanism

Slide 36

Citizen's vote is received Electronic voting mechanism

Slide 37

Marked badge Placing indelible ink and return of the citizen voter Electronic voting mechanism

Slide 38

At the end of the vote should raise the switch to close vote. At the close of voting ballot Viewer will open by pulling the lever.

Slide 39

The activation button was pressed to obtain the record of results. Electronic voting mechanism

Slide 40

The final results sheet shall be printed immediately. E-voting mechanisms

Slide 41

Slide 42

Slide 43

Portable Booth The booth package is integrated by: A suitcase form table, 3 booths sheets (2 siders and 1 centerfold), 4 bumpers, 2 tubes for curtains, 4 taps for curtains, 4 aluminum posters, 2 aluminum tightens, 1frame and 1 description letter to facilitate the ensemble. The total weight for the suitcase is 6 kilograms. The suitcase contains all up mentioned materials and has a dimension of 70 cm large, 35 cm wide and 8 cm deeper. Once ensemble the dimensions are 120 cm large, 70 cm wide and 170 cm height.

Slide 44

Manufactured in: The dimensions are 38 cm long by 38 cm wide by 38 cm high with a capacity to hold 750 ballots. The weight of empty urn is 870 g ( Support up to 4 kg ). In The top cover has a label with braille recorded to support people with visual disabilities. In the top cover slot for which the ballot is introduced is located, the dimensions of this is 12 cm long and 3 mm wide, sufficient to introduce a ballot folded into quarters space. Ballot box

Slide 45

Manufactured in: The dimensions are 47 cm long and 25 cm wide by 30 cm ato, sufficient to contain documentation of a square inner space. The weight of the empty box is 901 g ( Supports documentation 3 choices, Case Stand up to 16.5 kg). On the outside has three compartments : One to hold the indelible ink marker credentials and located in one of the side covers. Two more on the faces of greater area to protect the envelopes containing copies of the minutes to the preliminary results. For transportation includes a plastic handle and adjustable straps Box electoral package

Slide 46

Manufactured in: CredencialesLmina marker punched steel, bent and formed, with engravings obtained in the die. The dimensions are 290 cm long by 2.4 cm wide by 9.1 cm high Its approximate weight of 237g. The clamp has at one end an aluminum element hosting the given type marker interchangeable, which is steel and having at its free end corresponding to the election year and at the opposite end the anvil is located at close and press the mark applied uniformly on credentials. 15 Marker credentials

Slide 47

Manufactured in: Its dimensions are 1 cm diameter by 18 cm long with outer surface finish magenta enamel paint. The weight of each pen is 9 g Ten parts box as presented is 92 g. For identification features embossed in white identity of the Institute. Marker ballot

Slide 48

Formula developed by: The National School of Biological Sciences, National Polytechnic Institute. It is resistant to commonly used solvents and retention in the skin is 10 hours. Color is immediately observable and the drying time is 15 seconds. Indelible ink

Slide 49

Manufactured in: Opaque white plastic polypropylene to ensure mechanical resistance to tensile and impact properties. The weight of the particular screen is 668 g. The dimensions are 54 cm long by 35 cm wide by 49 cm ato, enough to provide voter secrecy when marking your ballot space. Presented to bend the pipe character slots and the walls and get a symmetrical assembly It features a reinforced instructive. Special Screens

Slide 50

Election materials Production Dates 1 January 26 to April 18, 2015 Distribution Dates 2 April 11 to April 25, 2015