mechanical engineering department · head of mechanical engineering department 1. ... ict mumbai,...

BHARATIYA VIDYA BHAVAN’S SARDAR PATEL COLLEGE OF ENGINEERING

(An autonomous institution affiliated to University of Mumbai)

website: http://www.spce.ac.in Mechanical Engineering

Department

Annual Report

Academic Year 2012-13

Report Highlights

Academic Programs

Research and Laboratories

Industry-Institute Interaction

Student Achievements

SPCE | MED

Annual Report 2012-13, Mechanical Engineering, SPCE 2

Patron

Prof. (Dr.) P. H. Sawant

Principal

Editor

Prof. (Dr.) R. B. Buktar

Advisors

Dr. R. S. Maurya

Dr. S. B. Rane

Prof. D. N. Jadhav

Prof. Sudhakar Umale

Mechanical Engineering Department,

Sardar Patel College of Engineering,

Bhavan's Campus, Munshi Nagar,

Andheri West, Mumbai 400058

Ph: +91-22-26232192

Fax: +91-22-26237819

www.spce.ac.in

CONTENTS

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Message from Head of Department

Overview of Academic Programs

Trends and Statistics (Result Analysis)

Faculty Research Publications

Introduction to Faculty

5.1 Faculty

5.2 Supporting Staff

Laboratories

Industry Institute Interactions

10.1 MOUs with Industry/Academia

10.2 Industrial Visits

10.3 Expert Lectures

10.4 Internship Training

10.5 Industrial Projects

Courses/Conf. Attended by Faculty

Courses Conducted with Industries/Institutes

Courses Conducted for Supporting Staff

MODROB Grants Received

Meritorious Students

Campus Placements

Postgraduate Programs

14.1 PG Coordinators

14.2 PG Courses

14.3 Proposed New PG Course (CIM)

14.4 Research Laboratory

Doctoral Program

15.1 PhD Program Coordinator

15.2 List of PhD Guides

15.3 QIP Center

3

3

4

4

4

5

6

7

7

7

8

8

8

9

9

9

11

11

11

12

13

13

13

13

13

14

14

14

14

SPCE | MED


I am pleased to share with you the Annual Report 2012-13 for the Mechanical Engi-

neering Department (MED), Sardar Patel College of Engineering (SPCE). This has been

another year of significant advancements on academic and research capability fronts.

This report will take you through various achievements by our students, faculty and

staff.

I thank all the faculty members and staff colleagues for their efforts to deliver impres-

sive performance and achieving significant growth of the department. I thank you for

reading and for your interest.

Dr. R. B. Buktar

Head of Mechanical Engineering Department

1. Message from Head of Department

Our Inspirations

Dr. P. H. Sawant

Professor & Principal—Sardar Patel College of Engineering

Dr. M. M. Murudi

Professor & Vice Principal—Sardar Patel College of Engineering

TEQIP Coordinator

2. Overview of Academic Programs

Academic Programme Specialization Duration Intake

Undergraduate

Bachelor of Engineering (B.E.) Mechanical Engineering Four Years 60

Postgraduate

Master of Engineering (M.E.) Machine Design Two Years 18

Master of Engineering (M.E.) Thermal Engineering Two Years 18

Doctor of Philosophy (Ph.D.) Mechanical Engineering NA 30

SPCE | MED


3. Trends and Statistics (Result Analysis)

Percentages of passing undergraduate and postgraduate students in each semester of the courses are as

shown below.

Undergraduate Course Postgraduate Courses

0

10

20

30

40

50

60

70

80

90

100

Sem. I Sem. II Sem.III

Sem.IV

Sem. V Sem.VI

Sem.VII

Sem.VIII

AY 2010-11 AY 2011-12 AY 2012-13

0

10

20

30

40

50

60

70

80

90

100

Sem. I (Them.) Sem. II(Therm.)

Sem. I (M.D.) Sem. II (M.D.)

AY 2010-11 AY 2011-12 AY 2012-13

4. Faculty Research Publications

0

1

2

3

4

5

6

7

8

9

10

2010-11 2011-12 2012-13

2

8

9

2010-11

2011-12

2012-13

1. Swapnil Marwadi and D. N. Jadhav, LEFM analysis of edged crack plate using analytical and FEA approach, International Con-ference on Mechanical and Industrial Engineering (ICMIE), 2012

2. Sanket Choudhary and D. N. Jadhav, A Suggested stress analysis procedure for nozzle to head shell element model – a case study, International Conference on Mechanical and Industrial Engineering (ICMIE), 2012

3. Swapnil Marwadi and D. N.Jadhav, Investigating the effect of distance between the crack and structural discontinuity using finite element analysis, International Journal of Advances in Engineering Science and Technology(IJAEST), 2013

4. Sanjay Lohar & Dr. R.B. Buktar, Analysis & Optimization of Backhoe of Earth Moving Equipment, National Conference on Mate-rials & Mechanical Engineering (NCMME2013), 2013

5. Nilesh Aitavade and D. N. Jadhav, Design and Analysis of Single Plate Blast Resistant Door, International Conference on Ad-vanced Engineering and Technology (ICAET), 2013

6. Shreyas Kulkarni and D. N. Jadhav, Wind Induced Vibrations of Tall Steel chimney International Journal of Mechanical Engi-neering Research, 2013

7. Prashant Mohite and Dr. R.R. Easow, Experimental Study of Horizontal Loop Parallel Flow Ground Heat Exchanger, Internation-al Journal of Pure and Applied Research in Engineering and Technology, 2013

8. Kunal Y Bhavsar and Dr. R S Maurya, Energy & Flow Separation in Vortex Tube: A Numerical Investigation, Int. Conference of Metallurgical, Manufacturing and Mechanical Engineering, 2013

9. Nilesh S. Varkute and Dr. R.S. Maurya, CFD Simulation in Township Planning – A Case Study, Int. Journal of Computational Engg. Research, 2013

SPCE | MED


5. Introduction to Faculty and Staff

5.1 Faculty

1) Dr. Rajesh Buktar B.E. (Mech.), M.E. (CAD/CAM), Ph.D. in Technology Head of Department and Associate Professor 16 years of Experience Research Area : IT enabled Technology Integration in Indian Auto component Industries

2) Dr. Roshini Easow B.E. (Mech.), M.Tech. (Thermal) Ph.D in Thermal Engineering Professor 29 years of Experience Research Area : Thermal Engineering, Renewable energy

3) Prof. Dattatray N. Jadhav B.E. (Mech.), M.Tech. (Machine Design) Pursuing Ph.D Associate Professor 20 years of Experience Research Area : Fracture Mechanics, FEM, Stress Analysis.

4) Dr. R.S. Maurya

B.E. (Mech.), M.E. (Thermal), PhD in

Thermal Engineering

Assistant Professor Mechanical

Engineering

24 years of Experience

Research Area : Thermo- fluid,CFD

Analysis Interface Tracking

5) Dr. S.B. Rane

B.E. (Mech.), M.E. (Machine Design),

PhD (Supply Chain Management)

Assistant Professor Mechanical

Engineering


Research Area : Supply Chain

Management , Lean Six Sigma,

Production Management

6) Shri Sudhakar Umale B.E. (Mech.), M.E. (Machine Design), PhD in Progress Assistant Professor 25 years of Teaching Experience Research Area : Material Technology

7) Shri P.K. Muley B.E. (Mech.), M.E. (Thermal),PGDIM Pursuing Ph. D. at IIT Bombay (Thermal Engineering) Assistant Professor 10 years of Industry Experience, 11 years teaching Research Area : Thermal Engineering

8) Ms. Megha Sukhdeo Janbandhu B.E. (Mech.), M.E. (Machine Design) Assistant Professor 03 years of Experience Research Area : Machine Design, CAD/CAM/CAE

9) Shri Sachin Vankar

B.E. (Mech.), M.E. (CAD/CAM)

Assistant Professor


Research Area : CAD/CAM

10) Shri Kunal Bhavsar B.E. (Mech.), M.E. (Thermal Engineering) WorkShop Superintendent 02 years of Experience Research Area : Computational Fluid Dynamics (CFD), Vortex Refrigeration, HVAC, Thermal Energy Storage

11) Shri Balwant N.Bhasme B.E. (Mech.), M.E. (Thermal Engineering) Pursuing Ph.D at IITB 15 years of Experience Research Area : Aeronautical Engineering

SPCE | MED


5.2 Supporting Staff

1. SHRI. R.B.KENI

CHARGEMAN

2. SHRI.S.M.SHETKAR

CARPENTER INSTRUCTOR

3.SHRI.N.S.GAIKAWAD

WELDING INSTRUCTOR

4. SHRI.P.M.LOHAR

SMITHY INSTRUCTOR

5. SHRI.LUIS P.DIAS

ENGINE ATTENDANT

6. SHRI.A.A.KALE

LAB ASSISTANT

7. SHRI. P.V.RAJE

LAB ASSISTANT

8. SHRI.KUMAR SHINDE

GENERAL MECHANIC

9. SHRI.NILESH KELKAR

FITTING INSTRUCTOR

10. SHRI. S.B. KOLAPATE

LAB ATTENDANT

11. SHRI.M.L.KHAMKAR

LAB ATTENDANT

12. SHRI.D.L.PARAB

LAB ATTENDANT

13. SHRI.M.L.RANE

LAB ATTENDANT

14. SHRI.M.T. BHANGARE

LAB ATTENDANT

15. SHRI.ARIF KAZI

LAB ATTENDANT

16. SHRI. JAFAR PATEL

LAB ATTENDANT

17.SHRI.VASANTHKUMAR H.S.

HAMAL 18. SHRI.G.P.JADHAV

HAMAL

SPCE | MED


6. Laboratories

Sr.No. Laboratory Name Laboratory In-Charge

1 CAD/CAM Laboratory Dr. R. B. Buktar

2 Thermal Engineering Laboratory Dr. R. S. Maurya

3 Mechatronics Laboratory Prof. S.R. Vankar

4 Heat and Mass Transfer Laboratory Dr. R. S. Maurya

5 Internal Combustion Engine Laboratory Prof. S. S. Umale

6 Material Science Laboratory Prof. S. S. Umale

7 Refrigeration and Air-conditioning Laboratory Prof. B.N. Bhasme

8 Theory of Machines and Vibration Laboratory Prof. D. N. Jadhav

9 Metrology and Measurement Laboratory Dr. S. B. Rane

10 Computational Fluid Mechanics Laboratory Dr. R. S. Maurya

7. Industry Institute Interaction

7.1 MOUs with Industries/Academia

MOUs with industries/academia provide improved career opportunities for the students of the col-

lege.

MOU’s is signed with

Rajarambapu Institute of Technology, Rajaramnagar (Sakharale)

Areas of Collaboration with Industries / Academia

Work jointly on research projects

Attend activities organized by both the parties.

Start Collaborative Research Program of mutual interests.

Industrial Visits

Developing Centre of Excellence.

Expert Lectures

Identify corporate training areas

Internship training

Provide training on software related to Mechanical Engineering

SPCE | MED


0

0.5

1

1.5

2

2.5

2010-11 2011-12 2012-13

7.2 Industrial Visits

Number of Industrial Visits

Department of Mechanical Engineering conducted a

series of focused industrial visits as per the require-

ments of various subjects. The rising trend of indus-

trial visits indicates that the college has actively uti-

lized the funds provided by TEQIP II for the benefit

of the students by organizing such visits.

Department of Mechanical Engineering conducted 3

expert lectures with support from industry profession-

als and academic experts during year 2012-13.

Expert lectures give students a cutting edge overview

of the current trends and practices in the outside

world.

Institute plans to organize lectures on more general

topics such as property matters, tax, etc. (for overall

development) so as to promote entrepreneurship.

Mr. Vivek Mahajan from DesignTech Systems Ltd., Pu-

ne, gave lecture on product development for final year

students.

7.3 Expert Lectures

0

2

4

6

2010-11 2011-12 2012-13

7.4 Internship Training

36 students underwent internship training in

the year 2012-13 in various organizations/

industries such as, Indian Railways, Bharat

Forge, L&T, Bosch, John Deere, Mahindra &

Mahindra, Batliboy, etc.

These trainings benefit the students by making

them aware of the trends/activities carried out

in an industry and will make them job ready

Such students can contribute more effectively

in classroom teaching with their views,

knowledge, experiences gained in industry 0

10

20

30

40

2010-11 2011-12 2012-13

SPCE | MED


7.5 Industrial Projects

The industrial projects benefit the students by

making them aware of the trends/activities car-

ried out in an industry and will make them job

ready.

The students can contribute more effectively in

classroom teaching with their views, knowledge

and experiences gained in industry.

0

2

4

6

8

10

2010-11 2011-12 2012-13

8. Courses Attended by Faculty

During year 2012-13, faculty attended 15 programs arranged by various institutes. Some of the organizations

visited by our faculty include: IIT Bombay, ICT Mumbai, VJTI, FRCRCE, IIM Indore, GCOE Aurangabad, COEP,

VNIT Nagpur, SAE India.

The training courses fine tunes a teacher's subject ex-

pertise. These help the teacher to draw students at-

tention to the practical application of the theories

learnt in classroom.

Knowledge of the trends followed in the industries

help teacher to design the syllabus with relevance to

industrial needs.

0

2

4

6

8

10

12

14

16

2010-11 2011-12 2012-13

0

1

2

3

4

5

2010-11 2011-12 2012-13

0

0.5

1

1.5

2

2.5

3

3.5

4

4.5

2010-11 2011-12 2012-13

9. Courses Conducted with Industries/Institutes

Courses conducted Lectures delivered

The courses conducted improve industry-institute interaction. These are a source of revenue generation as

well. Participants of such courses will develop skills to take on the challenges offered by the industry.

SPCE | MED


Mechanical Engineering Department conducted a 5-

day workshop from 24-28 June 2013 on ‘Product

Design Validation Using Finite Element Analysis’ in

collaboration with industry partners: Shirsh Design

Solutions and Fluid Controls Pvt. Ltd. and supported

by experts from COEP and IITB. Total 21 partici-

pants attended the workshop (Photo above).

Mr. G. K. Sadekar, Vice President, L&T, was invited

as chief guest for inauguration of workshop. In the

side frame Mr. Sadekar is seen with Dr. M.M.

Murudi, Vice-Principal, SPCE, during inauguration

function.

One day workshop on ‘Reverse Engineering & Product

Development’ was organized by MED in collaboration

with Design Consultancy Services and Parametric

technology Corporation (PTC) on 22nd March 2013.

Seen above are Dr. P.H. Sawant, Principal, SPCE, with

Dr. G.T. Thampi, Principal, Thadumal Shahani Engi-

neering College, Bandra, during inauguration ceremo-

ny.

One day workshop on ‘Product Lifecycle Manage-

ment (PLM)’ was organized by MED ) on 21st March

2013 which included both theory sessions and hands

-on-module on usage of PLM software.

Seen above are Dr. P.H. Sawant, Principal, SPCE, with

Dr. R.B. Buktar, HOD-Mechancal, during the opening

session of the workshop.

SPCE | MED


10. Courses Conducted for Supporting Staff Under TEQIP

Sr.

No Title of course Date Staff

1 Motivation & Stress

Management 15-17 May’13

Luis Pascal Dias Siddheshware Shetkar Nilesh Kelkar

Training courses for the supporting staff allow them to effec-

tively participate in the overall development of the college.

0

1

2

3

4

2010-11 2011-12 2012-13

11. MODROB Grant Received

Sr.

No. Title of MODROB/RPS proposal Name of faculty Year

Amount

sanctioned

1 Modernization & Removal of obsolescence

(MODROB)of thermal engineering laboratory Dr. R. S. Maurya 2012-13 15,00,000/-

A laboratory grant was received in the year 2012 -13 of value Rs.15,00,000. This fund shall be used to up-

grade the thermal engineering laboratory which will support research activities.

Merit Rank Seat No. Name of the Students Grade Points

FE MECH

1 FEM025 SALI ASKASH RAJENDRA 9.88

2 FEM025 NARVEKAR EKTA SHEKHAR 9.78

3 FEM025 ANASANE GAURAV ARUN 9.61

SE MECH

1 SEM045 NAIK PRATIK KIRAN RAO 9.73

2 SEM026 SHAH SHISHIR PARESHKUMAR 9.69

3 SEM064 GUPTA ASHISH ASHOK 9.69

4 SEM041 PARIK MIRAL BAKULBHAI 9.62

12. Meritorious Students

SPCE | MED


Merit Rank Seat No. Name of the Students Grade Points

TE MECH

1 TEM066 GHUGE SUSHIL MADHAV 9.81

2 TEM060 JOSHI SAUDAMINI JAGANNATH 9.81

3 TEM036 PATIL ASHISH SAHEBRAO 9.62

4 TEM061 JADHAV TEJAL DHONDIRAM 9.58

BE MECH

1 BEM006 TILVE PALLAVI MANGESH 1070

2 BEM046 JADHAV BHUSHAN BHARAT 1059

3 BEM018 SENJALIA PRITI DHANJIBHAI 1058

13. Campus Placements

The campus placement scenario for the year 2012-13

showed particiapation of industry from core engineer-

ing sector companies as well as IT organizations and

non-core companies. Majority of the students got

placement into organizations of their preference.

SPCE | MED


14. Postgraduate Programs

14.1 PG Coordinators

Dr. R. S. Maurya

M.E. Thermal Engineering

Coordinator

Prof. D. N. Jadhav

M.E. Machine Design

Coordinator

14.2 PG Courses

Department has a sanctioned intake of 18 students each for the M.E. in two specialization streams: (i) Thermal

Engineering and (ii) Machine Design.

14.4 Research Laboratory

14.3 Proposed New PG Course (CIM)

Department of Mechanical Engineering is starting a new PG course titled “Computer Integrated Manufacturing

(CIM)” in the future academic year.

Following software are proposed to be purchased before start of this course:

1. DELCAM

2. PLM

3. CATIA

4. DELMIA

5. SIMULIA (ABAQUS)

Research Laboratory is available for M.E. Ma-

chine Design course. In this Lab students can

carry out their computational research work.

This laboratory will provide research oppor-

tunities to the postgraduate students.

The laboratory will also promote in developing

the research culture in the department.

SPCE | MED


15. Doctoral Program

15.1 PhD Program Coordinator

Dr. S. B. Rane PhD Program Coordinator

Department has a sanctioned intake of 30 for the PhD Research Schol-

ars and it has applied for increase in intake up to 40.

Department has also applied for QIP Centre to AICTE.

Department has received a RPS grant from AICTE under the PhD pro-

gram.

15.2 List of PhD Guides

Sr. No.

Name PhD Guide Areas of Research

1 Dr. S. S. Mantha CAM, Robotics, SCM, Automation

2 Dr. G. T. Thampi CAD/CAM, Robotics, ERP, CRM,SCM,PLM,

3 Dr. A.V. Bhonsale TQM, Energy Efficiency

4 Dr. V. R. Kalamkar CFD, Machine Design

5 Dr. R. S. Maurya Thermal Engineering, CFD

6 Dr. S. B. Rane Lean Six Sigma, SCM, Project Mgmt, Production Mgmt

7 Dr. S. M. Khot Machine Design, ERP

8 Dr. Vivek Sunnapwar World class manufacturing, industrial engineering

15.3 QIP Center

The QIP center is under process of approval from AICTE.

* NOTE: The statistical data referred in this report represents general trend and not exact data.

mechanical engineering department · head of mechanical engineering department 1. ... ict mumbai,...

Documents