WWW.UNITEDASSETSALES.COM

ONLINE ONLY AUCTIONINSPECT ONSITE AND BID ONLINE

BIDDING CLOSES OVER 4 DAYSLOTS# 750-1843: BEGIN CLOSING SUNDAY, JUNE 30 AT 11 AM EDTLOTS# 1844-2885: BEGIN CLOSING MONDAY, JULY 1 AT 11 AM EDTLOTS# 2886-3928: BEGIN CLOSING TUESDAY, JULY 2 AT 11 AM EDT

LOTS# 3929-END: BEGIN CLOSING WEDNESDAY, JULY 3 AT 11 AM EDTINSPECTION: MONDAY, JUNE 17 FROM 11:00 AM TO 5:00 PM EDT AND

TUESDAY, JUNE 18 FROM 9:00 AM TO 4:00 PM EDT LOCATION: 126 ALLEGHENY BOULEVARD, BROOKVILLE, PA

OFFICE 818.264.4232 | ROY@UNITEDASSETSALES.COM

www.quakercityauction.com www.flsales.comOFFICE: (215) 426-5300

CINDY@QUAKERCITYAUCTION.COMOFFICE: 440-498-8484

JGREENE@FLSALES.COM

GENON POWER GENERATION MAINTENANCE FACILITYMECHANICAL CONTRACTOR & RIGGER EQUIPMENT& TOOLS,

INSPECTION, SHOP & SITE EQUIPMENT & MORE!

CONTRACTOR & RIGGER EQUIPMENT & TOOLS,

INSPECTION, SHOP & SITE EQUIPMENT, 100’S OF VIDMAR

CABINETS, TOOL & GANG BOXES, STEEL & MORE! MASSIVE

QUANTITIES OF EVERYTHING!

CNC MACHINERY: 2007 FADAL VMC4020 CNC VMC, S/N 012007019613, Travels; X-40”, Y-20”, Z-20”, Table 48” x 20”, 10,000 RPM, Cat 40 Taper, 24 Position ATC

CHIP BLASTER D30 Hi-Pressure Coolant Pump

2007 ROMI M20 CNC Lathe, S/N 002-092875-404, FANUC 20i-T Control, 3.15 Spdl. Dia., 20” x 80”, DUPLOMATIC 8-Position Turret, Programmable Tail Stock, SS to 2200 RPM

LATHES, MILLS, DRILLS & GRINDERS: LATHES: AXELSON 32 Engine Lathe, 40” x 154”, 24” & 36” 4-Jaw Chucks, 5-461 RPM, 36”, Face Plate; AMERICAN Engine Lathe, 36” x 168”, SS 23-1500 RPM, 21” 4-Jaw Chuck, Taper Attmt.; TIMEMASTER P18/27C Gap Bed Engine Lathe, S/N OL6N 10826, 20/28” x 120”, 17-1,500 RPM, IN/MT, 5” Spdl. Dia.; AMERICAN Engine Lathe, 14” x 130”, 4-Jaw Chuck, No Chip Pans; 2006 SHARP 1640L Gap Bed Engine Lathe, C80 DRO, IN/MT Threading, 16/26” x 40”, SS 40-2,000RPM, 10” 3-Jaw Chuck, 3” Spdl. Hole; SUMMIT 19-4x80 Gap Bed Engine Lathe, S/N 5557, 19”/28” x 80”cc, 4-1/8” Spdl. Dia., SS 22-1500 RPM, IN/MT Threading; CLAUSING COLCHESTER 15” x 54”, SS 25-2000 RPM, IN/MT Threading; AMERICAN TURNMASTER 18” x 80” Engine Lathe, S/N 1888 7010438, DRO, IN/MT Threading, 20-1,600 RPM

LeBLOND Engine Lathe S/N 8C4130, 16” x 60”, SS 30-1200 RPM

MILLS: 2006 BRIDGEPORT Series 2 Special Vertical Mill, s/n 6855S, 2HP, 9” x 48” PF Table, DRO, Air Drawer Bar; 2006 SHARP TMV VS VERTICAL Mill, S/N 50101790 , 10” x 54” PF Table, DRO, Air Draw Bar; (2) BRIDGEPORT 2J Vertical Mills, S/N’s19844 (Series, 2 HP) and 191038, 1 w/ 6” & 4” Riser Blocks, 9” x 42” PF Table

DRILLS: CINCINNATI GILBERT Radial Arm Drill, S/N 5730; 1990 SUPERMAX HRD-1000 Radial Arm Drill, S/N 9008141, SS 63-2,000 RPM, 10” Column x 48” Arm

GRINDERS: 2006 SUPERTECH STP-1022 ADCD Auto Hydraulic Surface Grinder, 8” x 18’ Electric Magnetic Chuck, Incremental Downfeed, Paper Filter System; 1980 BLANCHARD 20-36 Rotary Surface Grinder, S/N 20-15-239, 22KW (30HP), 5/16” Chuck, Electro-Mag Chuck; HARIG Super 612 Surface Grinder, S/N 12597; JET 8” DE Grinder

VERTICAL TURRET LATHE: 1982 SHIBAURA TX16 Vertical Turret Lathe, S/N 320243, DRO, 63” Table, 78.7” Max Swing, 59” Max Turning Height, 39.4” Vertical Travel, 17,600 LBS Max Load on Table 4-Jaw Table, 5-Position Turret

HORIZONTAL BORING MILL: 1981 KURAKI KBT-1003W Table Horizontal Boring Mill, S/N 9322, DRO, 41-1/4” x47-1/4” Rotary Table, Travels- X-59.7”, Y-48”, Z-47”, W-27.6”, 49” Vertical Travel, 55” Table cross Travel, 49” Longitudinal Travel,#50 Taper, SS 17-1200 RPM, Facing Head, Right Angle Attmt, Tools – Boring Heads, Angle Plates

WATER JET: INGERSOLL-RAND Water Jet, S/N E1-480/277, STREAMLINE SL-1V 30/50HP High-Pressure Water Jet Pump, 60,000 PSI, MACH MOTION H1510-01 Control, EBBCO Closed-Loop Filtration System, Media Pot

SHEAR: 1986 ALLSTEEL ½”-10’ Hydraulic Shear, S/N YS-5040, FOBG

BRAKE: 1986 ALLSTEEL 400-12 Hydro-Mechanical Press Brake, S/N Y-4022, 12” OA, 124” BH, 0-12” VS Stroke, 21” Open Ht.

ROLLS: PEXTO 48” Initial Pinch Rolls (Manual; ENCO 51” Manual Initial Pinch Rolls)

1980 BLANCHARD 20-36 Vertical Surface Grinder

ALLSTEEL 400 - 12 Hydro-Mechanical Press Brake and Dies

ALLSTEEL ½” x 10’ Hydraulic Shear

Partial View of Blast Room

MARVEL SERIES 8 Mark II Vertical Tilt Band Saw

Part 1: LIVE WEBCAST – CNC & Manual Machine Shop – Wednesday, June 19th @ 9:30AM • 126 Allegheny Boulevard, Brookville, PA 15825

Part 1: LIVE WEBCAST – CNC & Manual Machine Shop – Wednesday, June 19th @ 9:30AM • 126 Allegheny Boulevard, Brookville, PA 15825

IRONWORKERS: 2006 HILL-ACME GORMAN #5 Ironworker, S/N 8005-135-06, 20” Throat, 75 Tons Cap., 1-1/4”-11/16” 1” x 4”, ¾” x 6” & 5/8” x 10” Shear Cap., 5” x 5” x ½” Angles, 3” x 3” x ½” Coper/Notcher

PIRANHA P3 Ironworker, P3-1205, 8” Throat, 50 Tons Cap., 13/16” in ¾”, 15-1/2” Shear, 4’ x 4” ½” Angle, ¼”-1-1/2”, 2-3/4” x 4” x ¼” Coper/Notcher

MATERIAL HANDLING: NISSAN 50 LP Pneumatic Tire Fork Lift, S/N PJ02A25PV, 3245 LB. CAP, 3,905 hrs

CLARK NP 300-40 Stand-Up Reach Electric Fork Lift, S/N NP 246-0250-PM-5995, 3400 LB. CAP., 197” Lift

YALE GTC040AAJVATO83 LP Fork Lift, S/N P-315404, 4,000 LBS Cap., 3,128 hrs

CROWN SHR 5500 Series, 3500 LBS, 2-Stage to 156”, S/N 10005113, ONLY 60 hrs

SUPPORT & MISC SHOP EQUIPMENT:

(2) DUAL DRAW 4’ Clean Air Down Draft Sanding Stations; 25” x 110” T-Slotted Layout Table) 41-F, S/N 528-3-81; KENNEDY Tool Cabinets; Carts and more!

INSPECTION & TOOLING: (15) VIDMAR Cabinets; MITUTOYO PHA14 Optical Comparator w/ QM Data 200; (2) VIDMAR Cabinets of SUNNEN Hones, Arbors, Stones, Mandrels; TOOLING-Taps, Drills, End Mills, Reamers, Cutters, Tool Holders, KURT Vises, Dividing Head, Angle Plates, Collets, Tool Holders and more. STARRETT Micrometers to 60”; VERNIERS to 40”; Indicators; Gages; V-Blocks, Parallels, Levels & much more (the inspection equipment will be sold in both sales)

WELDERS: TIG: (6) 2009 MILLER CST 280; MILLER SPECTRUM 2050 W/ Tigrunner; MILLER Dynasty 300 DX w/Tigrunner (2) MILLER SYNCROWAVE 250 DX, S/N MC360117U & SYNCROWAVE 250 KJ227177

(5) MILLER DIALARC 250 AC/DC; (16) HOBART TR-300 w/Carts; (13) LINCOLN IDEALARC DC 600 & 500 & (7) R3R-500, (3) R3R-400, (1) R3R-300; (4) MILLER MARK VI (Stock Nos. 903512 & 903459) 6 & 8 Pack Welding Units

MIG: MILLER DIMENSION 302, S/N KH374514 W/60 Series Wire Feed; (2) MILLER DELTAWELD 302 S/N LG150072C W/24A Wire Feeder & S/N KG187985 w/ 70 Series Wire Feed; MILLER MILLERMATIC 300 S/C Mig, S/N KJ212322 MILLER S-32P Voltage Sensing Wire Feeder

WELDER/GENERATORS: (3) MILLER BOBCAT, 225NT, 225G& 250NT

SUB-ARC: (2) Sub-Arc Welding Stations w/ Miller Dimension 1000 Power Supplies & Accessories

EQUIPMENT: (2) ACORN 5’X8’ Welding Platens w/Clamps & Fixtures

WELD PLUS WPI P2000 S/N P20-765, Welding Positioner, 2000LB CAP, 28” 4-Jaw

LINCOLN 6000MS Stati Flex Weld Fume Extractor (LIKE-NEW) (The Stati Flex 6000-MS is a filtration system for low vacuum, high volume)

ACE 73-601 Fume Collector w/ 4 Weld Training Booths w/ Multi-Branch Flex Hoses

SAWS: 1982 MARVEL MARK II Tilt Head Vertical Band Saw, S/N 826264; 1981 MARVEL Series 8 Tilt Head Vertical Band Saw, 8/M8, S/N 812931; (3) WELLSAW Portable Hor./Vert. Band Saws; EVERETT 14 16 Cut-Off Saw; TARGET 14” Masonry Saw

BRIDGEPORT Series II Special Vertical Mill

LINCOLN 6000MS Stati Flex Weld Fume Extractor

View of L & L Furnace & Empire Blast CabinetView of 5 Ton RELIABLE Pedestal Crane

with Remote Operated 5 Ton Hoist

HILL ACME GORMAN #5 Iron Worker

2007 FADAL VMC40230 CNC Vertical Machining Center TIMEMASTER P18/27C Engine Lathe - 5” Spdl. Hole

2006

2006

2007

Part 1: 2 - DAY INSPECTION FOR BOTH AUCTIONS: Monday, June 17th from 11:00AM-4:00PM & Tuesday, June 18th from 8:00AM – 4:00PM

Mobile WALLACE Gantry w/CM 5 Ton Remote Controlled Hoist & V-Track

INGERSOLL- RAND SSR - EP100 Air Compressor

Part 1: LIVE WEBCAST – CNC & Manual Machine Shop – Wednesday, June 19th @ 9:30AM • 126 Allegheny Boulevard, Brookville, PA 15825

AMERICAN Engine Lathe 36” x 168”

Partial View of Welders & ACORN Platens

View of 10 Ton KONECRANE Bridge Crane

CRANES: WALLACE 5 Ton Motorized Mobile Gantry w/CM 5T Remote Controlled Hoist w/20’ Beam

KONECRANES 10 Ton Bridge Crane, Remote Controlled, 20’ Span; GORBEL Free Standing Hoist System w/ (2) BUDGIT 2 Ton Hoists, 30’ Span x 90’; RELIANCE 360◦ Jib Column & Hoist w/ R & M Remote 5 Ton Travel Hoist

SAND BLAST & HEAT TREATING: VACU-BLAST Room, MDL. 1010, S/N 78904, 10’ x 10’ x 10’ w/ Swing Doors, w/ EMPIRE Blast Pot, 650 LB Cap., Cyclone, Holding Bin, CHICAGO 8000 CFM Blower, Shot Receptor Bucket Elevator, Silo, Blast Pot 400LB, Trolley 4’x4’ Car, Dust Collector, Air Compressor; PAULI & GRIFFIN DH600 Star Blast Cabinet, 60” x 48” w/40” Rotary Table w/Shuttle, Dust Collector; PAULI & GRIFFIN SF DH/60 Blast Cabinet w/ Dust Collector; EMPIRE PF-6060 Blast Cabinet w/Dust Collector

FURNACES: 1996 L & L Special Furnace Industrial Oven, mdl. FB777-FA11-01-G394-480R3N-H96, S/N H496LN, 150 KW, 1000 Degree

MISCELLANEOUS: HOSSFELD Power Bender w/ Dies & Electric/Hydraulic Pump; ELECTRO-ARC 2MSAQ Tap Disintegrator, S/N 12328

PRESSES: DAKE 125 Hydraulic Press, 125 Ton, 125H, S/N 175546; PHASE II 6 Ton Arbor Press

DuMONT No. 3-R Ratchet-Type Arbor Press

AIR COMPRESSORS: GARDNER DENVER Electra-Saver II Rotary Screw Air Compressor, mdl. EBP99D, S/N S086769, Auto Sentry EST Control, 100 HP, 30,559 hrs, AIR TAK Refrigerated Air Dryer, Oil Water Separator, Remote Air Tank

INGERSOLL-RAND SSR-EP100 Rotary Screw Air Compressor, S/N F6073U92, 100 HP, 446 CFM

INGERSOLL-RAND 2545 10 HP Air Compressor

SUPERTEC STP-1022 ADC11 Hydraulic Surface Grinder

CROWN SRH5540-35 W/B Electric Stacker w/10’ Lift

(60 hours)

AXELSON 32 Engine Lathe

INGERSOLL- RAND Waterjet System with STREAMLINE Pump

2006

Partial View of Taps, Tools & Safety Equipment

TOOLS: Thousands of Adjustable (to 60”) Box, Open, Slugging and Socket Wrenches to 4”; Sockets to 5” Plus; Screw Drivers, Phillips, Pliers, Hammers & Saws; Clamps, Lasers, WILLIAMS Torque Multipliers; Torque Wrenches to ½”; Turbine Dies & Taps; OPTALIGN Units; Pullers and much more

SAFETY EQUIPMENT & SUPPLIES: All sizes Confined Space Bagged Gear, Safety Winches, Belts & Harnesses; Breathing Apparatus; Retractable Life Lines & Lanyards; SCOTT ProFlow Respirators; SKYLOCK Climbers; Electrician Gloves; Test Meters; MEGGER Testers; Flash Air Suits; ARS HEPA Filter Vacuums w/ Travel Boxes; AIR SYSTEMS Auto-Air Breather Boxes

POWER EQUIPMENT: (3) RIDGID 1224 Power Threaders; RIDGID 700 Hand Power Drives; Electric-Hydraulic Pumps; Threading Heads, Reamers, Hand Threaders, Cutters, Tri-Stands, Oilers & Dies; GREENLEE 555 Conduit Bender; Knock Out Sets; HYTORC Wrenches to 2”; INGERSOLL-RAND Impacts to 2”; HYDRATIGHT SWEENY Wrenches; SKIDMORE WILHELM Bolt Tension Calibrators & Torque Testers; Portable Load Centers; Air Tanks w/ Manifolds; INGERSOLL-RAND Motor Air Multivanes; Smog Hogs; Transformers; Welding Training Booths w/ Exhaust; Welding Gauges; Electrode Portable& Shop Rod Oven; HOUGEN & MILWAUKEE Roto Broaches & Magnetic Drills & Lg. qty. of Bits, VIDMAR Cab of Bits; INGERSOLL-RAND Air Digger; Hammer Drills, Rotary Drills, Hole Shooters, Drills, Die Grinders, Air Sanders, 7” & 4” Angle Grinders, Quick Angle Grinders, Bench & Pedestal Grinders, Air Ratchets Porta-Band, Circular, Chop, Jig & Reciprocating Saws, INGERSOLL-RAND Needle Scalers; Screw Guns; Seesnake; Electric Shavers; Zip Guns; INGERSOLL-RAND Air Chippers & Air Chuggers; (Brands include-MILWAUKEE, METABO, DEWALT, BOSCH, BLACK & DECKER, DYNABRADE, DOTCO, INGERSOLL-RAND, CAL-HAWK, TP TOOL, FEIN , CHICAGO PNEUMATIC, OTC, ENERPAC, SIMPLEX & GREENLEE Power Electric/Hydraulic Pumps; NITTO Hydraulic Punch; Air Powered Lube Units; BETTER ENGINEERING V200 Parts Washers; Hydraulic Cylinder Pulling Fixture; RECO BC Induction Bearing Heater; Conduit Benders w/ Shoes

INSPECTION & GAUGING: Outside Micrometers to 60”, Vernier Calipers to 60”, Gage Blocks & Pin Gages, Levels, Indicators, Large Quantities of VIDMAR, LYON & KENNEDY Cabinets and more

RIGGING EQUIPMENT: Large Quantities of Iron Rope, Kevlar, Polyester & Canvas Slings; Shackles to 75 Ton, Clevis’ & Eye Bolts (w/Transportable Racks); Bottle Jacks to 100 Ton; Hand Porta-Power Pumps & Electric-Hydraulic Pumps; Hundreds of Manual Chain Falls to 10 Ton and Come-A-Longs to 6-Ton; Beam Clamps, Propane Bottle Carrier Racks; POWER TEAM, OTC & SIMPLEX Bottle Jacks & General Purpose Cylinders to 50 Ton; ENERPAC Duckbill Spreader Tools & Wedges; Air Hoists, Screw Jacks; Skates; Hoist Trolleys; Turbine Shell Stands; Rolling Gantries; Knock Down Mobile Man Platform Racks; Gas Bottle Cages

MISCELLANEOUS: Stainless, Aluminum & Steel Plate, Pipe and Miscellaneous Steel; SS Fittings, Flanges, Valves etc: New-Safety Supplies. Hardware, Gloves, Apparel, Repair Parts for all Tools, Hoists, Welders, Threaders, Machinery and Power Equipment; Shelving, Racking, Cabinets, Iron Tables, Supply Cabinets, Knock-Down Rolling Platforms, Warehouse Carts, Self-Dumping Hoppers, Tool & Gang Boxes & Cabinets

GENERAL CONTACTORS’ EQUIPMENT: ARCTIC CAT ATV W/ Plow; KAWASAKI 4 WD ATV W/ Cab Hood & Pick-up Bed; GENIE DPL-24SP 2-Person Man Lift; JLG FS80 LiftPod (300+) Gang, Job & Tool Boxes & Cabinets; Up to 24’ Aluminum Platforms (Pics); Fiberglass Step Ladders to 14” & Extension Ladders; Man Lift Platforms; Warehouse Carts & Dollies; Wire Carts; Self-Dumping Hoppers; 3-Tier Rolling Mesh Steel Carts; Iron Work Tables w/ HD Vises; Hydraulic Pallet Jacks; Fire Wall & Oxy Torch Carts; 20’ & 40’ Sea Storage Containers; Flammable Liquid Storage Container; Gooseneck Trailer

Part 2: ONLINE ONLY – Mechanical Contractor & Rigging Equipment, Inspection & Gauging, Supplies, Warehouse Equipment, Steel and more!BIDDING OPENS: Monday, June 17th @ 9:00AM EST; 2-Day Closing on Monday & Tuesday, June 24th & 25th Beginning @ 10:00AM/each day (Details regarding closing are on BidSpotter under Auction Details)

Partial View of Cantilever Racks & Steel

Partial View of Large Micrometers to 60”

ARCTIC CAT ATV w/Front Plow

Partial Views of VIDMAR Cabinets & Hardware Drawers

Partial View of Porta-Power Job Site Boxes

* MASSIVE QUANTITIES OF EVERYTHING *

Partial View of the Large Quantities of Sockets, Wrenches, Winches, Tools, Shackles, etc.

2-PART LIVE WEBCAST & ONLINE AUCTIONGenOn Power Generation Maintenance Facility

126 Allegheny Boulevard, Brookville, PA 15825Part 1: LIVE WEBCAST CNC & MANUAL MACHINE & FABRICATION SHOP – Wednesday, June 19th @ 9:30AM

Part 2: ONLINE ONLY MECHANICAL CONTRACTOR MOBILE MAINTENANCE DIVISION – Note: There is Equipment & Tools for Boilermakers, Sheet Metal & Mechanical Contractors, Riggers & Millwrights, Large Capacity Machine Shops, QC & Maintenance Divisions

2 - DAY INSPECTION FOR BOTH AUCTIONS: Monday, June 17th from 11:00AM-4:00PM & Tuesday, June 18th from 8:00AM – 4:00PM • Massive quantities of Tools, Site Equipment & Supplies

License #AU001769L

PRESORTED FIRST-CLASS U.S. POSTAGE

PAID Permit # 2010Bellmawr NJ

409 Easton Road, Suite 101 Willow Grove, PA 19090www.quakercityauction.com

HUGE OFFERING WITH MASSIVE QUANTITIES 2-PART LIVE WEBCAST & ONLINE AUCTIONGENON CNC & MANUAL TURBINE REPAIR MACHINE & FABRICATION SHOP AND MECHANICAL CONTRACTOR MOBILE MAINTENANCE FACILITY.

TERMS: 13% ONLINE Buyer’s Premium; 10% LIVE Buyer’s Premium. Information & sale details at www.quakercityauction.com. Deposit may be required.Full Payment within 24 Hours at Conclusion of Auction Sale in Cash, Bank Check or Wire Transfer. No equipment may be removed until final payment in full is received. Business check accepted only when accompanied by Bank Letter of Guarantee: ‘Customer Name’ is a customer of the bank. This bank will guarantee unqualified payment to Quaker City Auctioneer’s on the account listed above up to the amount of $) _____. This guarantee is in effect until _____. Failure to pay auction bill will result in forfeiture of all items purchased. Wire Transfers to Quaker City Auctioneer’s account prior to sale is acceptable. Sales tax will be charged where applicable.

PLEASE NOTE: All items will be sold as is, where is, to the highest bidder in cash in accordance with our normal terms of sale, also posted throughout premises. Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information contained in this brochure. Buyers are urged to inspect prior to sale. The auctioneer is not responsible for discrepancies in description or nomenclature and assumes no liability for errors or omissions in the listing.

The auctioneer reserves the right to accept or reject any and all bids, to add, reduce and group any lots he deems appropriate. No items will be permitted to be removed until conclusion of sale and payment in full has been received. Neither the auctioneer nor any other party has heretofore and does not hereby make any representation or warranty, express or implied, with respect to the merchantability, condition, quality, durability or fitness of any items sold or any accompanying goods for the purpose of any buyers or their transferees, successors or assigns. The Machinery is sold without any warranty of any kind, whether express or implied.

The buyer acknowledges that it has not relied upon the skill or judgement of the seller in selecting or evaluating the Merchandise. The buyer represents that it has inspected the Merchandise, or that it has had a ful and fair opportunity to do so and has declined to do so. Having inspected the Merchandise (or having waived the right to do so) the buyer represents that it accepts the Merchandise in “as is” condition. The buyer acknowledges that the Auctioneer has no authority to make any warranty or representation on behalf of the owner.

Bidding Opens June 17th 9:00AM w/2-Day Closing, June 24th -25th.