mechanical accessories - hydac · mechanical accessories ... zbm 01 adapter female thread g1/4 –...
TRANSCRIPT
E 18
.363
.2/1
1.13
389
17
Mechanical Accessories
Connection accessories for pressure sensors
ZBM 01Adapter female thread G1/4 – male thread G1/2 B, DIN EN 837-1Part No.: 257276
ZBM 13Adapter female thread G1/4 - male thread G1/4 A, with orifice 0.5 mm Part No.: 906968
ZBM 14Adapter female thread G1/4 - male thread G1/4 (rotating)Part No.: 907818
hex. SW27
flat seal ring 6.2x17.5x2.0
hex. SW27
elastomer seal ring DIN3869
orifice
hex. SW19
elastomer seal ring DIN3869
ZBM 02Adapter female thread G1/4 – male thread G1/2 A, DIN 3852 Part No.: 257277 hex. SW27
O-ring 20.35x1.78 -NBR
E 18
.363
.2/1
1.13
390
17
ZBM 8000Clamp for wall-mounting - screw-type fitting -
(Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)
Part No.: 3546755
Mounting accessories, device-specific EDS 8000, HDA 8000; EDS 810
ZBM 8100Clamp for wall-mounting - weld-type fitting -
(Material of welding bridge: QSTE340TM, zinc coating EN 12329 FE/ZN8/B; Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)
Part No.: 3546757
hex. socket cap screw. ISO4762
hex. socket cap screw. ISO4762
E 18
.363
.2/1
1.13
391
17
ZBM 3000Clamp for wall-mounting - screw-type fitting -
(Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)
Part No.: 3184630
Mounting accessories, device-specific EDS 3000, ETS 3000, AS 3000, ENS 3000 and HNS 3000
ZBM 3100Clamp for wall-mounting - weld-type fitting -
(Material of welding bridge: QSTE340TM, zinc coating EN 12329 FE/ZN8/B; Material of lower section: TPE Santoprene 10187; Material of top section: Steel strip DIN 95381-1.4571)
Part No.: 3184632
ZBM 3200Splash guard
(Material: Elastollan S60 A15 SPF 000)
Part No.: 3201919
hex. socket cap screw. ISO4762
hex. socket cap screw. ISO4762
E 18
.363
.2/1
1.13
392
17
ZBM 300Clamp for wall-mounting - screw-type fitting -(Material polypropylene)Part No.: 906385
Mounting accessories, device-specific EDS 300, ETS 300
ZBM 310Clamp for wall-mounting - weld-type fitting -(Material polypropylene, aluminium AlSi12, steel)Part No.: 6011511
hex. socket cap screw ISO4762
E 18
.363
.2/1
1.13
393
17
Vibration mountsPart No.: 257492
Mounting accessories, device-specific EDS 1700, ETS 1700
Mounting kit EDS 601 - for front panel mounting-(St4K32 DIN 1544)Part No.: 905404
Mounting accessories, device-specific EDS 601
E 18
.363
.2/1
1.13
394
17
Protective sleeve for tank-mounting(Material CuZn39Pb3 - DIN 1763, electro-nickel-plated)Part No.: 909640
Tank mounting sleeve , device-specific ETS 3000 (100 mm)
lock nut SW41
Connection accessories, device-specific ENS 3000
ZBM 19Straight bulkhead union ISO 8434Part No.: 908738Note: Not suitable for ENS with 250 mm probe length
ZBM 20Straight male stud coupling to ISO 8434Part No.: 908739
compression nut (SW36) ISO8434-1-N-L22-St
seal ring Cu DIN7603-A 30x36SW36
appr
ox.
compression nut (SW36) ISO8434-1-N-L22-St
SW32
hex-SW27
E 18
.363
.2/1
1.13
395
17
Mounting block, device-specific HLB 1300
Connection accessories, device-specific AS 1000, AS 3000
ZBM 22 Mounting block for AquaSensor AS 1000 and AS 3000Part No.: 3248511
ZBM 21 (Flow)Mounting block for HLB 1300 for flow rates > 2 l/min Part No.: 3244260
ZBM 23 (Low Flow)Mounting block for HLB 1300 for flow rates from 0.5 .. 10 l/min Part No.: 3299331
E 18
.363
.2/1
1.13
396
17
HYDAC ELECTrONIC GMBH Hauptstraße 27, D-66128 Saarbrücken Telephone +49 (0)6897 509-01 Fax +49 (0)6897 509-1726 E-mail: [email protected] Internet: www.hydac.com
Note:The information in this brochure relates to the operating conditions and applications described.For applications or operating conditions not described, please contact the relevant technical department.Subject to technical modifications.