measurement and control controller – type econtrol filefor chlorine or other chemical measurement...
TRANSCRIPT
PRODUCT DATASHEET
Pompe Dosatrici – Metering Pumps UNI EN ISO 9001: 2000 – 9190.ETAD
MEASUREMENT AND CONTROL CONTROLLER – type eControl
Doc #: 225T01 - 27.0 1 (1) Etatron DS SpA – Via dei Ranuncoli, 53 – 00134 loc. Santa Palomba – ROMA - ITALY 21/10/2013
Le informazioni qui riportate possono essere soggette a modifica senza obbligo di comunicazione
TECHNICAL FEATURES 1 or 2 control measures
pH, RX, Cl, ppm and temperature measures in the following range:
pH measure 0,00 14,00 Rx measure -1000 +1400 mV Cl measure 0 2, 0 10, 0 20, 0 200 ppm ppm measure 0 2, 0 10, 0 20, 0 200 Temperature measure 0 100 °C (PT100)
Timer operation
4-20mA output for each measuring channel
ON/OFF or proportional mode
Hysteresis on the measurement
Alarm relay output
Graphic display
Control panel protected by screen-printed film
Frontal terminal block for inputs connections and services
IP65 protection degree
The eControl series of controllers have been designed and developed to be used in all applications requiring the continuous measurements of specific parameters to regulate dosing.
The controllers use galvanic isolated micro-processors protecting the readings from external enviromental affects.
The eControl a available with either single or dual channel measurement independently configurable. Each measurement channel is also equipped with 4-20 mA output.
For chlorine or other chemical measurement (ppm) potentiostatic probes (with dynamic range of 0 to-2V).
In addition to the measurement input(s), the controller can receive PT100 temperature and a level probe and/or proximity sensor input.
There is an Alarm relay output in the event of the dosed chemical running out. The controller is also equipped with a timer function for working on a set timetable.
In case of error calibration and/or incorrect settings of the controller, it can be reset to return to the factory settings.
The probes are supplied upon request according to the type of parameter that must be controlled.
PRODUCT DATASHEET
Pompe Dosatrici – Metering Pumps UNI EN ISO 9001: 2000 – 9190.ETAD
MEASUREMENT AND CONTROL CONTROLLER – type eControl
Doc #: 225T01 - 27.0 2 (2) Etatron DS SpA – Via dei Ranuncoli, 53 – 00134 loc. Santa Palomba – ROMA - ITALY 21/10/2013
Le informazioni qui riportate possono essere soggette a modifica senza obbligo di comunicazione
CC OO NN FF II GG UU RR AA TT II OO NN SS
MODEL
CXB7000 1 or 2 Measure Controller
FEATURES
101 1 Measure
102 2 Measure
CXB7000 101 eControl 1 Controller
DD II MM EE NN SS II OO NN ss
II NN SS TT AA LL LL AA TT II OO NN KK II TT
Wall mounting plate 4 plugs and screws Instruction manual Probes upon request
II NN PP UU TT SS // OO UU TT PP UU TT SS
Level probe or proximity switch input ph, RX (BNC) electrode input CL (PPM) probe input PT100 temperature probe input Alarm relay output (configurable NO-NC) 4-20 mA output