MEAN MACHINE AMPLIFIERS

Autotek’s® Mean Machine high-power car audio amplifiers include our superior Twin Coil Isolation Design

(TCID) for greatly improved noise isolation from the vehicle’s electrical system. Combine this with Autotek’s high

performance MOSFET output devices for superior sonic accuracy and reliability and it’s easy to comprehend the

resurrection of Mean Machine Amps.

Nowhere else is Autotek’s “Evolution of Power” more prevalent than in the distinctive Pro-Design crossover

network. Low-distortion, low-noise electronic crossovers direct just the right amount of critical mid- plus high-

frequency sent to speakers. This same crossover also controls the most critical low frequencies sent to larger

speakers that are suited for bass and sub-bass audio reproduction. To complete the network feature, the advanced

Band-Pass crossover skillfully positions a slice of sound directly into the middle of the audio spectrum for

mid-bass drivers or midrange speakers.

The Mean Machine mono-block units will pound away all day and still remain cool to the touch. The upgraded

D-Class design boosts extreme energy efficiency without any compromise to audio quality. As an added feature,

Mean Machine D-Class amps include a bass remote with a blue LED power indicator.

• Lineoutputforamplifierdaisy-chaining• BluehaloedilluminatingAutoteklogo• Heatdegenerativeextrusion• BassremotewithblueLEDpowerindicator(D-Classonly)• SystemdiagnosticsLED’s• BassThrust–variablebassequalization• 24dBsubsonicfilter• Multiplehigh-speedMOSFEToutputdevices

Model Description (RMS POWER)Four-ChannelMM4-400 4 x 100 @ 4-Ohms, 4 x 200 @ 2-Ohms, 2 x 400 @ 4-OhmsMono-BlockMM1-1000D 1 x 450 @ 4-Ohms, 1 x 700 @ 2-Ohms, 1 x 1000 @ 1-OhmMM1-1500D 1 x 650 @ 4-Ohms, 1 x 1000 @ 2-Ohms, 1 x 1500 @ 1-Ohm

extremeenergy

efficiencywithout

compromise

2 3

Street Machine AMPLIFIERS

Thisyear,theStreetMachinelineoffersupbigwattage,brutalpowerandhighperformanceinthree2-channel,

two4-channelandtwoA/B1-Ohmstablemonoblockamplifiers.

Keyfeaturesofthispowerfulseriesincludefullyadjustablecrossoverswith24dBsubsonicfilters,highpass,low

passadjustmentsand12dBofbassequalization.Inaddition,StreetMachineampsincludeapreampleveloutput

feature that permits daisy chaining and continuance of the audio input signal for system add-ons or multiple

amplifier systems. All mono-block amps include a mountable remote for bass control.

These great looking amplifiers feature a sonically accurate front-end design and progressive heat sink. If the

power and performance are not enough, the understated blue haloed Autotek logo illuminating from the center of

the amp is sure to create attention.

• A/BandMonoBlockamplifiers• Twin-CoilIsolationDesign(TCID)• Fullyadjustablecrossoversinclude: 24dBlow-pass 24dBsubsonicfilter• BassThrustwithvariablebassequalization• Autoteklogowithbluehaloillumination• RCAlineoutputsinclude: Amplifier daisy-chaining 4gaugepowerconnectors• Multi-channelamplifiersare2-Ohmstereostableand 4-Ohmmonostable• Remotebasscontrolincludedwithmonoblockmodels

big wattage,brutal power

ANDHIGH PERFORMANCE

4 5

Model Description (MAXX POWER)Two-ChannelSM2-400 2 x 100 @ 4-Ohms, 2 x 200 @ 2-Ohms, 1 x 400 @ 4-OhmsSM2-1000 2 x 250 @ 4-Ohms, 2 x 500 @ 2-Ohms, 1 x 1000 @ 4-OhmsSM2-1200 2 x 300 @ 4-Ohms, 2 x 600 @ 2-Ohms, 1 x 1200 @ 4-OhmsFour-ChannelSM4-800 4 x 100 @ 4-Ohms, 4 x 200 @ 2-Ohms, 2 x 400 @ 4-OhmsSM4-1000 4 x 125 @ 4-Ohms, 4 x 250 @ 2-Ohms, 2 x 500 @ 4-OhmsMono-BlockSM1-1000 1 x 250 @ 4-Ohms, 1 x 500 @ 2-Ohms, 1 x 1000 @ 1-OhmSM1-1500 1 x 375 @ 4-Ohms, 1 x 750 @ 2-Ohms, 1 x 1500 @ 1-Ohm

Super Sport AT Series AMPLIFIERS

When solid performance and reliability are vital, the AT Series line of amplifiers is the ideal choice for anyone

looking for extreme power without an extreme budget.

SuperSportAmplifiersareSEPP(SingleEndedPush-Pull)A/BClassdesignswith2-and4-channelbridgeable

models. The Super Sport MOSFET PWM (Pulse Width Modulated) power supplier offers instant MAXX power

outputfor1-OhmcapableA/Bclassmonoblockampsand2-Ohmstereoor4-OhmbridgecapableA/Bclass

2-and4-channelamps.The4-channelSuperSportampscanconfigureinto3-channelR&Landsubmode.All

amps in the AT series feature rugged MOSFET audio outputs lowering the amplifier’s need for massive amounts

of battery amperage.

Key features include a protection system with LED indicators to warn and detect against current, amperage

overload,shortcircuits thermaloverloadandDCoffset.Additionally, thepreamp levelRCAinputsanddaisy-

chain line outputs permit adding amplifiers to the car audio system without using costly and noise-ridden

Y-connectors.

• PreamplevelRCAinputs• Highlevelinputson2and4channelmodels• Daisy-chainlineoutputs• Mono/stereoswitch• High-pass/low-pass/full-passfrequencyselections• DiagnosticLEDpowerprotectionsystemwarnsanddetects• 4-channelampsinclude: Separate front and rear bass EQ controls adjustable +12dBbassEQat45Hz Input level control Oversizedspeakerterminals• Remotebasscontrolincludedwithmonoblockmodels• Multi-channelamplifiersare2-Ohmstereostableand 4-Ohmmonostable

SOLID PERFORMANCEAND

reliability

6 7

Model Description (MAXX POWER)Two-ChannelAT1000 2 x 250 @ 4-Ohms, 2 x 500 @ 2-Ohms, 1 x 1000 @ 4-OhmsAT1500 2 x 375 @ 4-Ohms, 2 x 750 @ 2-Ohms, 1 x 1500 @ 4-OhmsFour-ChannelAT1200 4 x 150 @ 4-Ohms, 4 x 300 @ 2-Ohms, 2 x 600 @ 4-OhmsMono-BlockAT2000.1 1 x 500 @ 4-Ohms, 1 x 1000 @ 2-Ohms, 1 x 2000 @ 1-Ohm

8 9

ATX Subwoofer

“The Evolution of Power” is abundant in this heavy-duty Autotek® ATX subwoofer.

Ataperformance-sized15”,thisincrediblesoundingsubisidealforhigh-powerlisteninglevelsandextremeSPL

competition.TheATX1615offerssuperiorsonicaccuracyandintensehigh-powersoundqualityat1600-watts

RMS.The3”dualvoicecoil2-Ohmhightemperatureblackaluminumformerhandlesintensehighpower,while

a1”highrollpolyesterfoamsurroundprovideslongexcursion.Alargeaircooled160oz.doublestackmagnet

assembly adds increased motor strength.

An overall great looking unit, but don’t let the cosmetically appealing look of the white chrome finished basket

fool you. The ATX sub is built to be durable for years with uncompromised consistent quality play. The double-

laminated poly-cotton spider assembly with woven tinsel leads was engineered to prevent fatigue and a ported

back-plate disperses the heat. • 15-inchDVCsubwoofer

• Designedforportedenclosures• 1-or4-Ohmoperation• 76mmdual2-Ohm+2-Ohmvoice-coil• 160oz.high-energymagnet• Fiber-glassinfusedFEAstructuredcone• Die-castaluminumchromespeakerframe• Multi-layerhigh-tempvoicecoil• Front-plateandvoice-coilcooling• Double-laminatedintegratedspidertinsel-leaddesign• 25.4mm/1”hi-excursionsurround• Pushandinsertwireterminals

Mean Machine Subwoofers

MeanMachineDVCsubwoofers startwithpowerful100ozhigh-energydouble stackedmagnet assemblies

coupled to a nickel-plated extra-thick back-plate to focus all the amps energy within the speaker’s core. Four-layer

hi-temp aluminum voice-coils take the magnetic energy and transfer it efficiently to the subwoofer cone. Next,

theallimportantspiderassemblyeliminatesthemostcommonformoffailureforasubwoofer–dreadedtinsel-

lead failure.How?Ouracousticalengineers implementedasingle-pieceNomex® tinsel-lead spider assembly

integrating critical signal pathway wires inside the flexible spider material itself. This prevents the tinsel wires from

fatiguing due to massive cone vibrations while ensuring reliability and clarity.

• Polypropyleneconewithwovenhoneycombstructured support body• Stitchedrubbersurroundforbigexcursion• DVC2-or4-Ohm2.5”voicecoilonaglassfiberformer• 100oz.magnetwithanti-resonantcover• Portednickel-platedbackplate• Injectionmoldedconenecksupport• SingleflatNomex® spider with woven tinsel leads• Formfittingtrimconcealsmountingscrews

Model Description (MAXX / RMS POWER)ATX1615 15” 2-Ohm DVC woofer - 3200 watts / 1600 watts

Model Description (MAXX / RMS POWER)MW10D2 10” 2-Ohm DVC woofer - 1000 watts / 500 wattsMW10D4 10” 4-Ohm DVC woofer - 1000 watts / 500 wattsMW12D2 12” 2-Ohm DVC woofer - 1200 watts / 600 wattsMW12D4 12” 4-Ohm DVC woofer - 1200 watts / 600 wattsMW15D2 15” 2-Ohm DVC woofer - 1400 watts / 700 watts

Square SubwooferMW12SQD4 12” 4-Ohm DVC woofer - 1200 watts / 600 watts

10 11

Street Machine Subwoofer

If the goal is to add bass to an OEM factory sound system and still leave some cash in the bank, the Street

Machine series from Autotek® has the perfect subwoofer.

The Street Machine subwoofer complements the high performance of any Autotek system. In addition, this

subwoofer offers extreme efficiency, great value and plenty of power. It was designed to produce consistent

quality play in moderately small enclosures.

The Street Machine subwoofer not only performs great, it looks great as well. Available in dual voice coil for years

of solid performance.

• 12-inchDVCSubwoofer• High-energymagnet• Vibrationresistantstampedsteelbasket• ABSmotorcover• Longexcursionrolledsurround• Front-plateandvoice-coilcooling• Polypropylenerigidcone• Embossedpolypropylenedustcap• Integratedspiderwoven-intinselleads• Progressiveratewovencottonspider• Anti-ResonantMagnetBoot

Model Description (MAXX / RMS POWER)SM12D4 12” 4-Ohm DVC woofer - 600 watts / 300 watts

Super Sport AT Series Subwoofers

Autotek’s® Super Sport line of AT series entry level subwoofers is ideal for those looking for extreme power,

without an extreme budget. With great features it offers high value, accurate bass reproduction and the quality

expected from Autotek.

TheATsubwooferlineoffersthree12”modelsindualandsinglevoicecoilthataretestamenttothecombination

of performance and value that Autotek has offered to premier car audio enthusiasts for three decades strong.

• 12-inchDVCandSVCsubwoofer• Dual4-Ohm,dual2-Ohmandsingle 4-Ohmvoicecoils• High-energymagnet• Papercone• Ultrarigidstampedsteelbasket• Multi-layerhigh-tempvoicecoil• Front-plateandvoice-coilcooling• Integratedspidertinsel-leaddesign• Foamsurround

Model Description (MAXX / RMS POWER)AT12D2 12” 2-Ohm DVC woofer - 600 watts / 300 wattsAT12D4 12” 4-Ohm DVC woofer - 600 watts / 300 wattsAT12S4 12” 4-Ohm SVC woofer - 600 watts / 300 watts

12 13

SUPER SPORT AT Series Speakers

The goal in developing Autotek’s® line of dependable automotive speakers was to match the quality of our

world-class amplifiers with “The Evolution of Power” foremost. For the enthusiast who demands excellent sonic

accuracy,amazingsoundqualityandgreatvalue,theATseriesoffersanincrediblelineupofspeakers.

ATseriesspeakersaremadeinthemostsought-aftersizestofitrightintofactoryspeakerlocationswithlittleor

no modification. They were designed for uncomplicated, easy installation with features normally found in higher

end units. Technology is evident everywhere in Autotek's full-range and component speakers. Look closely for

durable moisture-resistant rubber speaker surrounds, bass enhancing alpha-cellulose cones and super output

neo-Mylar soft dome tweeters. Experience the power that only Autotek can bring.

• Impactresistanttweeterelements• Neo-Mylarsoftdometweeter• External12dBpassivein-linecrossover with component set• RaisedT-yoke• Alpha-cellulosecones• Spade-stylespeakerterminals• Moisture-resistantrubbersurround• Highmid-bassimpact• Anti-resonantstampedsteelbasket• Allinstallationhardwareincluded

Maxxsonics® MAXX-LINK™ Amplifier Bridging & Synchronization Module

Universal Link & Sync™• Interconnectivity/linkingmobileamplifiersintoa“masterandslave”configuration• Linkuptofive(5)amplifierpairs• Remotelevelcontrolwith3-stageLEDclippingindicator• Master/slavecontrolswitch• 24dBadjustablelow-pass(35Hzto250Hz)• Built-in65Hzset-uptesttone• 24dBadjustablesubsonicfilter(15Hzto35Hz)• 10dBadjustableparametricbassEQ• Variablewide/narrowbandwidthcontrol• Built-inlinedrivervariablefrom1-9volts• 0to180°adjustablephasecontrol• 2-channelRCAaudiopass-through

Autotek® Four Band Equalizer

9-Volt Line-Driver Multiple-Source Signal Processor• 4-bandequalizerandline-driver• Dualinputswithlevelmatching• Idealforadd-onMP3players• DIN,ISOmountequalizerchassis• Masterandsubwoofervolumecontrol• Fronttoreardualampfader• Highpassfront/rearcrossover with12dBslope• Formonoorstereosubwoofersetups• Selectableblueorredillumination• Built-in9-voltlinedriver• EQcontrols: 12dBofboostat45Hz 120Hzmid-bassat2.2kHz 12kHztreble• Selectablesubwooferoutput: 50Hz 80Hz 120Hzat18dBslope

Autotek® 2- / 3-Way Active Crossover with Remote Bass Control

• For2-or4-channelinputs• Sub-inreceiverswithsub-outputs• Bassremotewith12dBbassboost• 8.5-voltsRMSmaximumoutput• Formonoorstereosubwoofers• 180°phase-shiftswitch• 45Hzbassboostwithquasi-parametricequalizer• Leveladjustmentsforfront,rearandsubchannels• Secondorderbutterworthhigh-pass/frontandrearchannels• RCAaudiopass-throughfordaisy-chainingtwoormoreunits

Model DescriptionAT6.2C 6.5” 2-way component - 50W nominal 250W maxxAT62CX 6.5” coaxial speaker - 50W nominal 250W maxxAT692 6 x 9” coaxial speaker - 75W nominal 375W maxxAT693 6 x 9” 3-way speaker - 75W nominal 375W maxx

MLX-100

7007

ATK-2/3X

14 15

Features

•Convertsandfiltershigh-levelfactoryspeakerwiresintoultra-cleanunbalanced(RCA)low-levelsignalstoanaftermarketamplifier•HighLevelInputs:Acceptsalltypesofhigh-levelinputsignalsincludingfloatinggroundtype,lowandhighvoltagespeakerwires•AudioSignalSense:Speakeraudiosignaldetectionautomaticallyturnsonthecontrollerandtheamplifier(MX-1hasbothremote wire and signal sense capabilities)•ParametricBassEQ:Providesawidearrayofsubwooferoutputsignalshapingcontrolstoenhancebassresponseandsound quality including Bass Boost, adjustable Bandwidth (wide and narrow), Low Pass and Subsonic Filter•ClippingIndicators:Visualclippingindicatorsprovideindicationofdamagingclippedsignalstohelpprotectthesubwooferand amplifier. Includes pre-clip, soft-clip as well full-clip indicators •BalancedLineDriver:Ultra-cleanDINvariablehigh-voltageoutputdrivesmonoamplifierswithBLDinput•RemoteOutput:Built-inamplifiercircuitactivatesanyaftermarket+12voltamplifieruponradioactivation•BassRemote:Includedbassremotefeaturingbuilt-inclippingindicatorsallowsdirectbasscontrolfromin-dashorunder-dash•InputandOutputLevelControl:Thesystemprovideshighlevelinputandoutputlevel(gain)controlforbothfullrangeand subwoofer signals

MX-1 Premium High-to-Low Level Converter

Easily add an aftermarket amplifier to any OEM radio system with this superior line-level controller that converts factory high-level speaker wires into unbalancedlow-level(RCA)outputsandaddsmultiple sound shaping controls to clean up and boost the high distortion factory outputs.

Maxxsonics OEM Accessories are the answer for getting more power and better sound from an existing car audio system when it is improbable, impractical and sometimes just impossible to change an aftermarket head unit.

Features

•Convertsandfiltershigh-levelfactoryspeakerwiresintoultra-cleanunbalanced(RCA)low-levelsignalstoanaftermarketamplifier•HighLevelInputs:Acceptsalltypesofhigh-levelinputsignalsincludingfloatinggroundtype,lowandhighvoltagespeakerwires•AudioSignalSense:SpeakeraudiosignaldetectionautomaticallyturnsontheControllerandtheamplifier(MX-2hasbothremote wire and signal sense capabilities)•RemoteOutput:Built-inamplifiercircuitactivatesanyaftermarket+12voltamplifieruponradioactivation•InputandOutputLevelControl:Thesystemprovideshighlevelinputandoutputlevel(gain)controlforbothfullrangeand subwoofer signals

MX-2 Deluxe High-to-Low Level Converter

Conveniently converts a stock head unit’s speaker wire signal(highlevel)intoanRCA(lowlevel)signalforusewith an aftermarket amplifier.

MX-3 Bass Controller

Working in conjunction with an aftermarket radio and amplifier, the Bass Controller takes the designated radio subwoofer or full-range stereo output from the radio and processes the low frequency bass notes. In turn, this enhances the bass response, increases linearity, buffers unwanted transient noise and improves the frequency range for overall improved bass quality.

MX-4 Add-A-Sub High-to-Low Level Converter

This unique Controller provides the ideal way to add more bass without changing an entire OEM radio system.

Features

•ParametricBassEQ:Providesawidearrayofsubwooferoutputsignalshapingcontrolstoenhancebassresponseandsound quality including Bass Boost, adjustable Bandwidth (wide and narrow), Low Pass and Subsonic Filter•Acceptsawiderangeofincomingmusicsignallevelswhileaccommodatingalltypesofheadunitsandsignalprocessorsandcontrollingtheoutputleveltotheamptomaximizeasignalstrengthupto9volts•ClippingIndicators:Visualclippingindicatorsprovideindicationofdamagingclippedsignalstohelpprotectthesubwooferand amplifier. Includes pre-clip, soft-clip as well full-clip indicators•Shapesthemusicsignaltoachievedeepbassnotesaslowas15Hz•BassRemote:Includedbassremotefeaturingbuilt-inclippingindicatorsallowsdirectbasscontrolfromin-dashorunder-dash

Features

•Convertsandfiltershigh-levelfactoryspeakerwiresintoultra-cleanunbalanced(RCA)low-levelsignalstoanaftermarketamplifier•HighLevelInputs:Acceptsalltypesofhigh-levelinputsignalsincludingfloatinggroundtype,lowandhighvoltagespeakerwires•OEMhigh-levelinputvoltagesareadjustablefrom4voltsto40volts•Unbalancedlineoutputsareadjustabletotheaftermarketamplifierfrom4voltsto9volts

oem integration

Maxxsonics® USA, Inc. 1290 Ensell Road Lake Zurich Illinois 60047 USA Phone: 847-540-7700 FAXX: 847-540-9776

www.maxxsonics.comMB Quart,® Autotek,® Hifonics® and Crunch® USA are divisions of Maxxsonics® USA Inc.

©2009 Maxxsonics USA, Inc. All Rights Reserved Specifications And Designs Are Subject To Change Without Notice.

Visit Us On The Web @maxxsonics.commyspace.com/maxxsonicsusayoutube.com/MaxxsonicsUSAInc