COMP: R002301 25/03/2019

SCM GROUP CANADA INC. 1

ME35 T Edgebander 2 mm /glue scraper

MAIN FEATURES

GLUING UNIT: SUPERIOR PERFORMANCE WHEN APPLYING ALL SOLID WOOD EDGES

HIGH FREQUENCY MOTORS: MAXIMUM RELIABILITY AND PRECISION

Offer: 609565/1 - LM 25/03/2019

SCM GROUP CANADA INC. 2

Technical features me 35t

- worktable dimensions [mm ] 3000 x 525

- worktable height [mm] 904

- thickness of rolled edges [mm] 0,4 ÷ 3

- thickness of edges in strips [mm] up to 5

- min. ÷ max. panel height [mm] 8 ÷ 50

- min. panel length/width with rolled edges [mm] 190/110

- min. panel length cut only on the front [mm] 120

- feed speed [m/min] 7

- feed motor power S1 [kW] 0,55

- pneumatic operating pressure [bar] 6,5

- exhaust outlet diameter (glue pot) [mm] 60

- no. 2 exhaust outlets diameter (trimming unit) [mm] 60

- no. 2 exhaust outlets diame ter (pre -milling unit) [mm] - 80

- operating temperature [°C] 20 ÷ 190

GENERAL FEATURES

control panel on machine infeed side machine frame made of high rigidity ribbed steel to guarantee an excellent support for the operating units top thick steel press ure beam with rubber coated wheels manual adjustment of top beam with automatic positioning of the operating units according to the selected panel thickness numeric indicator of the selected panel thickness glue smokes speci�c exhaust outlet; panel suppo rt roller which can be extended on the entire length of the machine safety enclosure electrical cabinet with new PLC and improved performance and 4 -lines display, padlockable main switch and overload protection, push buttons

Production code: ME35

10.40. 45 ESECUZIONE A NORME UL/CSA N. 1

R0.03.14 MINIMAX ME 35T USA/CANADA VERSION N. 1 Automatic edge bander with glue pot (USA -Canada version) complete with: - pre -milling unit - special end cutting unit with radius function Operating groups

COMP: R002301 25/03/2019

SCM GROUP CANADA INC. 3

Complete with 2 diamond tools, 80 mm diameter. It allows a very good panel �nsh and linearity during pre -machining. It is equipped with independent exhaust hoods and a air blower which cleans the panel from dust and chips. 4 possible removals: 0,5 -1 -1,5 - 2 mm thickness. It is possible to carry vertical adjustments of the tools to use them even in the �nal sharpening phase. - no. 2 exhaust outlets diameter [mm] 80

- motor power (S1) [kW] 2,2

- blade rotation speed [rpm] 7.200

- no. 2 diamond cutters Ø 80 mm H56 Z2

- stock removal [mm] 0,5/1/1,5/2

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM

complete with: hot melt glue with quick heat up system and internally te�on coated to allow an easy glue replacement glue application on the pa nel by means of glue spreading roller temperature adjustment of the applied glue integrated in the PLC control device for automatic recovery of unused glue automatic edge loading system for rolled edges with shear device for 3 mm max. thickness edges coil holder plate, 730 mm diameter pressing unit with n. 2 edge steel rollers with counteposed conicity adjustable infeed fence with numeric readout automatic lowering of the glue pot temperature after a temporary non-use of the machine

PRE-MILLING UNIT

Offer: 609565/1 - LM 25/03/2019

SCM GROUP CANADA INC. 4

self - lubrication system of the glue pot - motor power (S1) [kW] 0,18

- glue capacity [kg] ~ 0,8

E ND CUTTING UNIT WITH RADIUS FUNC TION

with high frequency motor for 90° end cutting of front and rear exceeding edge.

- motor power (S1) [kW] 0,19

- end cutting blade Ø 125 mm Z 12

- blade rotation speed [rpm] 12.000

TRIMMING UNIT with high frequency motors and front copying pads (with chrome plated surfaces) and vertical copying discs for an accurate positioning of tools with reference to the cutting point.

The unit is provi ded with 55,3 mm diameter, combined cutters: the radius part of the cutter is used to trim radius edges (2mm or 3 mm on request) and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from r adius edge to edge in wood is done easily moving the cutters.

COMP: R002301 25/03/2019

SCM GROUP CANADA INC. 5

The edge thickness is shown by 2 numeric readouts. The unit is equipped with independent exhaust systems. - upper/lower motor power (S1) [kW] 2 x 0,35

- widia cutters Ø 55,3 mm Z3

- cutter s rotation speed [rpm] 12.000

- vertical/horizontalo copying devices rotating/rotating

93.07.58 230 VOLT N. 1

93.12.15 FREQUENCY 60 HZ N. 1

58.04.55 SINGLE -PHASE VERSION FOR ME 35 T N. 1 58.04.34 GL UE SCRAPING UNIT N. 1

It eliminates any excess of glue in the joint between panel and edge, improving the panel cleaning.

58.04.44 BRUSHING UNIT N. 1 With two independent motors (s1 0,14kW – 2.800 rpm) for the cleaning and polishing of the edge. T ilted, vertically adjustable motors to optimize the cleaning/polishing action.

Offer: 609565/1 - LM 25/03/2019

SCM GROUP CANADA INC. 6

58.04.53 AUTOMATIC LOADING DEVICE FOR EDGES IN STRIPS N. 1

08.06.82 TRIPLE WALL PACKAGE N. 1

08.09.99 DELIVERY EX FACTORY N. 1