me2257 set1

Download ME2257 SET1

Post on 04-Jun-2018

227 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • 8/13/2019 ME2257 SET1

    1/34

     

    ANNA UNIVERSITY : CHENNAI – 600 025

    B.E./B.Tech. DEGREE EXAMINATIONS. Apr./May.-2013

    Regulations – 2008

    Fourth Semester

    B.E. Mechanical Engineering/

    ME2257 COMPUTER AIDED MACHINE DRAWING LABORATORY

    Time: 3 Hours Maximum Marks: 100

    Mark Allotment Pattern

    Aim/Procedure/System

    requirements

    Theory and

    Sketches

    Part – A

    2D CAD Model

    or

    Manual Drawing

    (Any One)

    Part – B

    Viva Total

    15 25 50 10 100

    Note: Select any one question from Part – A and one question from Part – B

    Part – A (Marks: 25)

    1.  With a neat sketch mark the basic terms of a welded joint for butt weld andfillet weld.

  • 8/13/2019 ME2257 SET1

    2/34

    2.  For the following designation draw the illustration and symbol for welding joints.

    a.  Square butt weld b.

     Single – V butt weld

    c.  Single – bevel butt weldd.  Fillet welde.  Spot weldf.  Seam weld

    3.  With a neat sketch mark the dimensions of the edge preparation for the buttwelds.

    4.  Draw the standard location of elements of a welding symbol.

    5.  With a neat sketch explain caulking and fullering in riveted joint.

    6.  With neat sketches name the types of rivet head.

  • 8/13/2019 ME2257 SET1

    3/34

    7.  Define the terms associated with riveted jointsa.  Pitch

     b.  Marginc.

     Chain riveting

    d.  Zig-zag rivetinge.  Row pitchf.  Diagonal pitch

    8.  (a) Name the commonly used materials for rivets.(b) How riveted joints made air tight?

    9.  (a) What is a structural joint in rivets?(b) How boiler joint are classified?

    10. Sketch any two types of structural riveted joints, indicating proportionatedimensions.

    11. Draw the sectional front view for the following riveted joints to join plates ofthickness 10 mm.

    a.  Single riveted lap joint b.  Double riveted chain lap jointc.  Double riveted zig-zap lap joint

  • 8/13/2019 ME2257 SET1

    4/34

    12. Through sketches, indicate the various types of welding joints.

    13. Sketch and explain the two conventional signs used for welding as per BIS.

    14. (a) Categorize the welding symbols.(b) How weld symbols shown in the drawing?

    15. (a) Explain the meaning of “arrowside” and “otherside” with reference to weld joints.

    (b) What are the important rules to be observed while applying weld symbols?

    16. (a) What is a key and what for is it applied?(b) What is the difference between a saddle key and a sunk key?

    17. What is a cotter and where is it used? What is the purpose of using a gib alonewith a cotter in a cotter joint?

  • 8/13/2019 ME2257 SET1

    5/34

  • 8/13/2019 ME2257 SET1

    6/34

     

    23. How are the following threads designated as per BIS.(a) Metric thread with coarse pitch

    (b) Metric thread with fine pitch(c) Square thread

    (d) ACME thread

    24. (a) What is T-Bolt and where is it used?(b) What is an eye-Bolt and what purpose is it used?

    25. Sketch the following thread profiles for a nominal diameter of 25 mm and pitch 3 mm and give their applications

    (a) BSW thread

    (b) Buttress thread

    26. Sketch the following thread profiles for a nominal diameter of 25 mm and pitch 3 mm and give their applications

    (a) Square thread

    (b) ACME thread

  • 8/13/2019 ME2257 SET1

    7/34

    27. Sketch the conventional representation of the following(a) External thread

    (b) Internal thread

    (c) Thread in section(d) Assembled threads in section

    28. Sketch any two types of bolts with their applications.

    29. Sketch the following forms of nut, with proportions marked(a) Flanged nut

    (b) Cap nut

    (c) Dome nut

    (d) Capstan nut

    30. Define the terms :(a) Basic size

    (b) Limits

    (c) Allowance

    (d) Tolerance

  • 8/13/2019 ME2257 SET1

    8/34

    31. (a) What is unilateral tolerance?(b) What is bilateral tolerance?

    32. What is fundamental tolerance and how tolerance is denoted?

    33. What is meant by the term fit and how are fits classified?

    34. Differentiate between clearance fit and transition fit.

    35. Differentiate hole basis system and shaft basis system?

    36. With the help of sketches, show how the geometrical tolerances are indicated,as prevalent in industry, for the following cases:

    (a) Parallelism

    (b) Perpendicularity

    (c) Symmetry

    (d) Radial run out

  • 8/13/2019 ME2257 SET1

    9/34

    Note: Select any one question from Part – A and one question from Part – B

    Part – B (Marks: 30)

    1.  Manually sketch the butt-muff coupling as shown in Figure 1(b) and half-lapmuff coupling as shown in Figure 2 (b).(Take D = 30 mm, W = 5 & T = 3 mm) (25 + 25)

    Figure 1

    Figure 2

  • 8/13/2019 ME2257 SET1

    10/34

    2.  Manually sketch the split muff coupling as shown in Figure 3 (b) and flangedcoupling as shown in Figure 4 (b).

    (Take D = 30 mm, W = 5 & T = 3 mm) (25 + 25)

    Figure 3

    Figure 4

  • 8/13/2019 ME2257 SET1

    11/34

    3.  Manually sketch the protected type flange coupling as shown in Figure 5 andsolid flanged coupling as shown in Figure 6.

    (Take D = 30 mm, W = 5 & T = 3 mm)

    Figure 5

    Figure 6

  • 8/13/2019 ME2257 SET1

    12/34

    4.  Manually sketch the universal coupling as shown in Figure 7 (b).(Take D = 30 mm, W = 5 & T = 3 mm)

    Figure 7

  • 8/13/2019 ME2257 SET1

    13/34

    5.  Manually sketch the Plummer block as shown in Figure 8.

    Figure 8

  • 8/13/2019 ME2257 SET1

    14/34

    6.  Manually sketch the screw jack as shown in Figure 9. 

    Figure 9

  • 8/13/2019 ME2257 SET1

    15/34

    7.  Manually sketch the screw jack as shown in Figure 10. (Body, Barrel &Spindle) 

    Figure 10

  • 8/13/2019 ME2257 SET1

    16/34

    8.  Manually sketch the Plummer block as shown in Figure 11. 

    Figure 11

  • 8/13/2019 ME2257 SET1

    17/34

    9.  Manually sketch the screw jack as shown in Figure 12.

    Figure 12

  • 8/13/2019 ME2257 SET1

    18/34

    10. Manually sketch the universal joint as shown in Figure 13.(Take D = 30 mm, W = 5 & T = 3 mm) 

    Figure 13

    11. Manually sketch the machine vice as shown in Figure 14.

    Figure 14

  • 8/13/2019 ME2257 SET1

    19/34

    12. Manually sketch the stuffing box as shown in Figure 15. 

    Figure 15

  • 8/13/2019 ME2257 SET1

    20/34

    13. Manually sketch the safety valve as shown in Figure 16. 

    Figure 16

  • 8/13/2019 ME2257 SET1

    21/34

    14. Manually sketch the non-return valve as shown in Figure 17. 

    Figure 17

    15. Manually sketch the connecting rod as shown in Figure 18. 

    Figure 18

  • 8/13/2019 ME2257 SET1

    22/34

    16. Using CAD software sketch the butt-muff coupling as shown in Figure 19(b)and half-lap muff coupling as shown in Figure 20 (b).

    (Take D = 30 mm, W = 5 & T = 3 mm) (25 + 25)

    Figure 19

    Figure 20

  • 8/13/2019 ME2257 SET1

    23/34

    17. Using CAD software sketch the split muff coupling as shown in Figure 21 (b)and flanged coupling as shown in Figure 22 (b).

    (Take D = 30 mm, W = 5 & T = 3 mm) (25 + 25)

    Figure 21

    Figure 22

  • 8/13/2019 ME2257 SET1

    24/34

    18. Using CAD software sketch the protected type flange coupling as shown inFigure 23 and solid flanged coupling as shown in Figure 24.

    (Take D = 30 mm, W = 5 & T = 3 mm)

    Figure 23

    Figure 24

  • 8/13/2019 ME2257 SET1

    25/34

    19. Using CAD software sketch the universal coupling as shown in Figure 25 (b).(Take D = 30 mm, W = 5 & T = 3 mm)

    Figure 25

  • 8/13/2019 ME2257 SET1

    26/34

    20. Using CAD software sketch the Plummer block as shown in Figure 26.

    Figure 26

  • 8/13/2019 ME2257 SET1

    27/34

    21. Using CAD software sketch the screw jack as shown in Figure 27. 

    Figure 27

  • 8/13/2019 ME2257 SET1

    28/34

    22. Using CAD software sketch the screw jack as shown in Figure 27. (Body,Barrel & Spindle) 

    Figure 28

  • 8/13/2019 ME2257 SET1

    29/34

    23. Using CAD software sketch the Plummer block as shown in Figure 29. 

    Figure 29

  • 8/13/2019 ME2257 SET1

    30/34

    24. Using CAD software sketch the screw jack as shown in Figure 30.

    Figure 30

  • 8/13/2019 ME2257 SET1

    31/34

    25. Using CAD software sketch the universal joint as shown in Figure 31.(Take D = 30 mm, W = 5 & T = 3 mm) 

    Figure 31

    26. Using CAD software sketch the machine vice as shown in Figure 32.

    Figure 32

  • 8/13/2019 ME2257 SET1

    32/34

    27. Using CAD software sketch the stuffing box as shown in Figure 33. 

    Figure 33

  • 8/13/2019 ME2257 SET1

    33/34

    28. Using CAD software sketch the safety valve as shown in Figure 34. 

    Figure 34

  • 8/13/2019 ME2257 SET1

    34/34

    29. Using CAD software sketch the non-return valve as shown in Figure 35. 

    Figure 35

    30. Using CAD software sketch the connecting rod as shown in Figure 36. 

    Figure 36