mds steel barrier and bridge rail - mdsbarriers.com · protection over bridge ... weight 88 lbs per...
TRANSCRIPT
HIGH PERFORMANCEMDS® ROAD & BRIDGE
STEEL BARRIER SYSTEMS
TL4 & TL5Minimal Deflection Systems
MDS® FHWA Approved
Designed with Progressive SRS© Stress Reduction System®
MDS® TL5 H4 Series
MDS® TL4 H2-Series
MDS® TL4 H3-Series
R7
MDS® Road and Bridge Steel Barrier Systems
MINIMIZE DECK DAMAGE
MDS® Steel Barrier System can beutilized for new bridge construction or on rehabilitation bridge projects. Theunique energy dissipating slip baseconnectors (SRS©) Stress Reduc-tion System anchored with mechanicalor chemical anchors, may reduce deckdamage by minimizing the force fromimpacts transmitted to bridge deck.MDS® Bridge Rails are manufactured inthe U.S. and are FHWA approved underNCHRP Report 350 and MASH TestLevel 4 and Test Level 5 compliant.
• Available in standard 10’ & 20’ sectionsfor design flexibility.
• 5” Anchor embedment into concrete bridge deck with4 or 8 anchors per 20’ section. (No through deck required)
• Open design at curb line allows for roadway andbridge drainage.
• Tested simple pin connections allow quick & efficientassembly.
• Minimum maintenance and easy repair.
Manufactured in the USA
MODELSMDS® TL5 H4 Series Total height 66” Base height 38.5” Base width 19.7”Weight 88 lbs ft.
Approvals FHWA Approved TL5, NCHRP Report 350, MASH-08
Total height 51”Base height 38.5”Base width 19.25”Weight 64 lbs ft.
Approvals FHWA Approved TL4, NCHRP Report 350, MASH-08
Total height 60”Base height 40”Base width 24”Weight 83 lbs ft.
Approvals EN1317 H3PENDING FHWA TL4 APPROVAL
MDS® TL4 H2 Series MDS® TL4 H3 Series
Assembly and Maintenance
FEATURES
OPTIONS
With Progressive Stress Reduction System (SRS©)
• Minimal forces transmitted to bridge deck, due to energy dissipating slipbase with Progressive SRS© Technology if impacted within NCHRPReport 350 or MASH criteria.
• Can be used on new or rehabilitation bridge projects.• Special Variable Length Barrier extending over 27 inches to
accommodate expansion joints.• Permanent or temporary installation.• 100% hot-dipped galvanized steel.
• Rear mount sound barrier and site walls protection
MDS® TL5 H4 BARRIERSMDS® Steel Barrier System can be utilized for new bridge constructions or on rehabilitation bridge projects. The unique energy dissipating slip base connectors (SRS©) Stress Reduction System anchored with mechanical or chemical anchors, may reduce deck damage by minimizing the force from impacts transmitted to bridge deck.MDS® Bridge Rails are manufactured in the U.S. and are FHWA approved under NCHRP Report 350 and MASH Test Level 5 compliant.
PROVEN MDS® TL5 PERFORMANCEMDS® BARRIERS have been tested to meet the highest performance standards in the world, passing both the American Standard NCHRP Report 350 and MASH Test Level 5 including European Standard EN1317 Test Level H4b.
FEATURES• Highest containment in a portable TL5 system• Modular 20ft, 10ft and custom lengths• Lightweight only 88 lbs per foot• Progressive SRS© technology• Variable Length Barriers for expansion joints• Eliminates 87% of concrete barrier dead weight• 25+ year life cycle• Adapts to all industry standard end treatments• Easily remove and replace damaged sections• Pre-designed for noise and site wall integration
APPLICATIONS• Bridges• Work Zones
• Highway Medians• Edge of Roadways
OPTIONS
MDS® TL5 H4 Series
MDS® BARRIERSMinimum Deflection Systems
SITE & NOISE WALLS Sound barrier panels provide a perfect noise protection system that is resistant to atmospheric corrosion in industrial and seaside environments.
TRANSITIONS MDS® BARRIERS transition into all guardrails, concrete barriers and end treatments for seamless integration.
VLB BRIDGE EXPANSION JOINTSVariable Length Barriers provide positive linear protection over bridge expansion joints expanding more than 27 inches maintaining TL5 protection.
MDS® TL4 H2 BARRIERSMDS® Steel Barrier System can be utilized for new bridge constructions or on rehabilitation bridge projects. The unique energy dissipating base connectors (SRS©) Stress Reduction System anchored with mechanical or chemical anchors, may reduce deck damage by minimizing the force from impacts transmitted to bridge deck.MDS® Bridge Rails are manufactured in the U.S. and are FHWA approved under NCHRP Report 350 and MASH Test Level 4 compliant.
PROVEN MDS® TL4 PERFORMANCEMDS® are a high performance aesthetically engi-neered bridge rail system designed for both new and existing bridge rehabilitation projects. Modular design facilitates assembly for permanent installations and can be easily installed and relocated for temporary installations. Developed specifically for bridges due to its light weight and high impact TL-4 protection.
FEATURES• Highest containment in a portable TL4 system• Modular 20ft, 10ft and custom lengths• Lightweight only 64 lbs per foot• Progressive SRS© technology• Variable Length Barriers for expansion joints• Eliminates 90% of concrete barrier dead weight• 25+ year life cycle• Adapts to all industry standard end treatments• Easily remove and replace damaged sections• Pre-designed for noise and site wall integration
APPLICATIONS• Bridges• Work Zones
• Highway Medians• Edge of Roadways
OPTIONS
MDS® TL4 H2 Series
MDS® BARRIERSMinimum Deflection Systems
SITE & NOISE WALLS Sound barrier panels provide a perfect noise protection system that is resistant to atmospheric corrosion in industrial and seaside environments.
TRANSITIONS MDS® BARRIERS transition into all guardrails, concrete barriers and end treatments for seamless integration.
VLB BRIDGE EXPANSION JOINTSVariable Length Barriers provide positive linear protection over bridge expansion joints expanding more than 27 inches maintaining TL4 protection.
MDS® TL4 H3 MEDIAN BARRIERSMDS® Steel Barrier System can be utilized for new bridge construction or on rehabilitation bridge projects. The unique energy dissipating base connectors (SRS©) Stress Reduction System anchored with mechanical or chemical anchors, may reduce deck damage by minimizing the force from impacts transmitted to bridge deck.MDS® Bridge Rails are manufactured in the U.S. and are EN 1317 H3 approved. MDS®
TL4 has no protruding anchors allowing for positive barrier protection especially in environ-ments with active snow plowing.
PROVEN MDS® TL4 PERFORMANCEMDS® MEDIAN BARRIERS are a high performance aesthetically engineered median barrier System designed for both new and existing bridge rehabilitation projects. Modular design facilitates assembly for permanent installations and can be easily installed and relocated for temporary installations Developed specifically bridges due to its light weight and high impact TL-4 protection.
FEATURES• Highest containment in a portable TL4 system• Modular 20ft, 10ft and custom lengths• Lightweight only 83 lbs per foot• Progressive SRS© technology• Variable Length Barriers for expansion joints• Eliminates 87% of concrete barrier dead weight• 25+ year life cycle• Adapts to all industry standard end treatments• Easily remove and replace damaged sections• Pre-designed for noise and site wall integration• Internal anchoring for 100% positive barrier protection
APPLICATIONS• Bridges• Work Zones
• Highway Medians• Edge of Roadways
OPTIONS
MDS® TL4 H3 Series
MDS® BARRIERS Minimum Deflection Systems
TRANSITIONS MDS® BARRIERS transition into all guardrails, concrete barriers and end treatments for seamless
VLB FOR BRIDGE EXPANSION JOINTSVariable Length Barriers provide positive linear protection over bridge expansion joints expanding more than 27 inches maintaining TL4 protection.
integration into industry standard crash barrier systems. MDS® BARRIER Transitions simplify the joining of bridge parapets providing a full scale end to end TL4 minimal defection barrier system.
SITE & NOISE WALLS Sound barrier panels provide a perfect noise protection system that is resistant to atmospheric corrosion in industrial and seaside environments.
STEEL SOUND PANELS Metal sound barriers are made of galvanized steel, stainless steel or aluminum by cold forming process. Sound barrier panels provide a perfect noise protection and are resistant to atmospheric corrosion in industrial and seaside environments.
GLASS SOUND PANELSTransparent sound barriers are made up of laminated glass panels fitted in aluminum frames. Each frame is connected to the barrier posts by bolts and safety cables only in the case of extreme bolt failure. Glass panels maintain excellent transparency in all weather conditions and guarantee maximum noise protection in any location where noise pollution is an issue, such as highways and residential areas.
SAFETY SOUND PANELSProtect bridge decks from public abuse and projectiles. Enclose construction sights discouraging visibility and access. Provide full scale wide area protection for high threat areas for absolute containment.
MDS® BARRIERSMinimum Deflection Systems
HEA140HEA140HEA140HEA140
18 Ft
13.12 Ft
8.14
13.12 Ft
6.5 Ft
MDS® TL5 MDS® TL4
6.5 ft 10 ft 13.5 ft
Weight to be calculated according to panel configurationGlass, Aluminum, or Glass & Aluminum
TOTAL HEIGHTS TOTAL HEIGHTS
Feet Meters
6.56 2
8.2 2.59.84 311.48 3.513.12 414.76 4.516.4 518 5.5
Feet Meters
8.14 2.48
9.84 313.12 4
HEA140HEA140HEA140HEA140
18 Ft
13.12 Ft
8.14
13.12 Ft
6.5 Ft
MDS® TL5
SOUND AND SITE WALL HEIGHT OPTIONS
MDS® TL4 B
B
A
A
MDS TL5H4 SERIES
High Performance MDS® STEEL BARRIER SYSTEMSMinimal Deflection Systems
SPECIFICATIONS
MDS® TL5 H4 Series
19.7”
MDS® TL5 H4-Series
22 “
38.5
“2“
64 “
5“
6” 10”24”
8”
Minimum TL5 Deflection System SpecificationsHeight 66”Base unit height 38.5”Base width 19.7”Weight 88 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL5, NCHRP Report
350, MASH-08FHWA Ref MDS-5Ref EN1317 Sergard MDS H4b
MDS® TL5 H4 SERIES
High Performance MDS® STEEL BARRIER SYSTEMSMinimal Deflection Systems
SOUND WALLS
SPECIFICATIONSMinimum TL5 Deflection System Specifications
MDS® TL5 H410Total height 10ftHeight 66”Base unit height 38.5”Base width 19.7”Weight 88 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL5, NCHRP
Report 350, MASH-08 Ref EN1317 Sergard MDS H4b
MDS® TL5 H413Total height 13ftHeight 66”Base unit height 38.5”Base width 19.7”Weight 88 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL5, NCHRP
Report 350, MASH-08 Ref EN1317 Sergard MDS H4b
MDS® TL5 H416Total height 16ftHeight 66”Base unit height 38.5”Base width 19.7”Weight 88 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL5, NCHRP
Report 350, MASH-08 Ref EN1317 Sergard MDS H4b
MDS® TL5 H410 MDS® TL5 H4 MDS® TL5 H416
16 Ft
13 Ft
10 Ft
Weight to be calculated according to the panel configurationGlass, Aluminum, or glass & aluminum
MDS® TL4H2 SERIES
High Performance MDS® STEEL BARRIER SYSTEMSMinimal Deflection Systems
MDS® TL4 H2-Series
Minimum TL4 Deflection System SpecificationsHeight 51”Base unit height 38.5”Base width 19.7”Weight 64 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL4, NCHRP Report
350, MASH-08 FHWA Ref MDS-4Ref EN1317 Sergard MDS H2
SPECIFICATIONS
MDS® TL4 H2 Series
5“
8 ”
19.3 ”
12 ”
38.5
”
MDS® TL4 H2 SERIES
High Performance MDS® STEEL BARRIER SYSTEMSMinimal Deflection Systems
SOUND WALLS
SPECIFICATIONSMinimum TL4 Deflection System Specifications
MDS® TL4 H298Total height 8ftHeight 51”Base unit height 38.5”Base width 19.7”Weight 64 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL5, NCHRP
Report 350, MASH-08 Ref EN1317 Sergard MDS H2
MDS® TL4 H2XXTotal height XftHeight 51”Base unit height 38.5”Base width 19.7”Weight 64 Lbs per footSteel Coating ASTM 123 GalvanizedAnchoring Every 10 feetApprovals FHWA Approved TL4, NCHRP
Report 350, MASH-08 Ref EN1317 Sergard MDS H2
8 ”
98 ”
27.5 ”47 ”
59 ”
19.3 ”
27 ”
12 ”
38.5
”
MDS® TL4 H298
Weight to be calculated according to panel configuration
Glass, Aluminum, or Glass & Aluminum
®
MDS® BARRIERS43 Franklin St East Hartford, CT. 06108
Toll Free: 888-906-9327 Tel: 860-906-3390
email: [email protected] www.jerseybarriers.com