md news 01 english
DESCRIPTION
MD News. Md news in real time.TRANSCRIPT
On air:
the wind
ofchange!
M.D.Micro Detectors
introduces the new
capacitive sensors
and the new safety
light curtains.
Discover the M30
Ultrasonic Sensor UT1
with a maximum range
of 3,500 mm!
news M.D. Micro Detectors Magazine n°1 - 27/11/2012 - English version
Hall 7A - Stand 610
M.D. Micro Detectors introduces the new cubic miniaturized Photoelectric Sensor QMRG: the perfect solution for critical applications.This product allows the perfect detection of transparent objects thanks to a distan-ce capability range between Photoelectric Sensor and reflector from 50 mm to 1,5 m.It can be used to detect plastic and glass bottles and any kind of plastic films.
The trimmer adjustment allows an easy and quick setting for an excellent detection sensitivity, which together with a high switching frequency of 2 Khz, grants a much more precise detection.
The red visible light emission simplifies and speeds up the sensor installation, al-lowing an immediate alignment procedure.
It is available with NPN or PNP output, NO/NC, selectable through a second trimmer, cable exit, M8 plug exit and M8/M12 pigtail version.
The product, IP67 certified, is with re-sin full filled, for granting better performan-ces in harsh environments. Particularly fit-table in high vibration fields, this sensor together with the armored brackets, ST103 and ST104, grants a complete shock protection.QMRG sensor enlarges the present QM series of-fer, which is one of the most complete range on the Market.
THE PERFECT
SOLUTIONS
FOR YOUR
AUTOMATION
Pho
toel
ectr
ic S
enso
rs
Application:
Control of strap oscillation
in the polishing machines
FC4 - Fork sensor for
driving edge applications
Photoelectric Sensors
Application note
CAT3EFC1257201
Application note - FC4 - english - Ed.01/2012
Photoelectric sensors
Data sheet Cod. CAT3EQM1260001
Datasheet - QMRG - english - Ed.01/2012
Cubic photoelectric
miniaturized sensor
QMRG to detect
transparent object
NewApplication
Notes
All type of applicative solutions in a unique for-mat: ALL IN ONE!
M.D. Micro Detectors, always considered one of the first industrial sensors supplier in wood wor-king machines, is glad to launch the new fork sen-sor FC4 series used to detect belt oscillation on polishing machines.
Polishing machines are normally equipped with a belt which oscillates continuously, for ensuring a uniform panel polishing, and for avoiding any ma-nufacturing imprecision; since the raw material pa-nel could be larger or smaller than the belt itself this must be oscillating to ensure a uniform pro-cessing.
The FC4 sensor is the best solution for this kind of application, thanks to its four optical beams: the two internal ones check the oscillation width of the belt, the two external ones activate the alarm output in case of incorrect positioning
QM
21x12.8x31.2 mm
20 m
-25°C...+70°C
IP67
plastic
PMMA
FG
20x43x65 mm
50 m
-25°C...+55°C
IP67
plastic
PMMA
90...310 mm110...600 mm
100 mm
400 mm / 1,000 mm
12 m5 m0.4... 4 m
0.05... 1.5 m
(pig-tail)
NewModelQMRG
background suppression
power supply
output
other certifications
Vdc
cable
ATEX
M12 pig-tail
Vac
M8 plug
output type
dimensions
diffuse short distance
diffuse long distance
retroreflective
polarized
retroreflective for transparents
through beam
temperature range
laser
protection degree
axial optic
housing material
90° optic
active head material
NPN - NO
NPN - NC
PNP - NO
PNP - NC
NPN - NO / NC
PNP - NO / NC
NPN - NO + NC
PNP - NO + NC
DECOUT ®
relè
SCR
FC4
26x83x162 mm
h= 43 mm
-25°C...+55°C
IP67
PC
PC
pig-tail
power supply
output
other certifications
Vdc
cable
ATEX
Vac
M12 plug
output type
dimensions
contrast scanner
luminiscent scanner
colour sensor
slot sensor for edge detection
sensing distance
temperature range
protection degree
housing material
head material
NPN / PNP NO / NC
4x NPN / PNP NO /NC
NPN - NO / NC
PNP - NO / NC
DECOUT ®
SCR
NewModel
Impro-ved
model
Cubic Special
THE NEW
STANDARD!
Ultr
ason
ic S
enso
rs
Applicazione:
Controllo presenza operatori
per automezzi atti a raccolta rifiuti
UK1 - Sensori Ultrasonici M18
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258701
Nota applicativa - UK1 - italiano - Ed.01/2012
M.D Micro Detectors Ultrasonic Sensors UK1, M18 family, are now available also in cable ver-sion and NPN output.
The Ultrasonic Sensors range consists of the fol-lowing series: UK1A, UK1C, UK1D, UK1F.
The UK1F sensors, particularly, have a working range between 200 and 2,200 mm, and can de-tect, in direct diffuse mode, targets at a distance normally reachable by M30 sensors.
Through their compact body, they can be easily fit-ted in narrow spaces.
These products have two different types of adjustments (window teach-in and direct on the object) and their present configurations con-sist of six different output versions:
• Single analogic output in tension 0…10 V • Single analogic output in current 4..20 mA • Single digital output PNP NO/NC or NPN NO/NC• Double digital output PNP NO/NC or NPN NO/NC• Mixed digital output PNP NO/NC or NPN NO/NC and analogic 4..20 mA or 0…10 V.
Thanks to the Teach-in button they are extremely easy to be set.
The complete range is cULus, ATEX certified (cat.3, zone 2.22 for gas and dusts).
UK1 Ultrasonic Sensors have been tested with success in different applications and industries. The ultrasonic technology, whose M.D. Micro De-tectors is one of the few worldwide producer, al-lows to solve different application problems: it is possible, in fact, to detect targets in spite of the color, the shape and the type of material.
Typical applications are the following:level measuring (flour, grain, food and beverage industry in general), presence detection (wood industry, steel industry…), distance measuring (earthmoving machines, refuse compactors).
The complete UK and UT ultrasonic sensors range is ATEX and cULus certified.
Applicazione:
Controllo livello nelle isole ecologiche
interrate per smaltimento rifiuti
UK1 - Sensori Ultrasonici M18
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258401
Nota applicativa - UK1 - italiano - Ed.01/2012
Applicazione:
Controllo estensione stabilizzatore
per gru idrauliche articolate
UK1 - Sensori Ultrasonici M18
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258101
Nota applicativa - UK1 - italiano - Ed.01/2012
ATEX
Ultr
ason
ic S
enso
rs
-20°C...+60°C
IP67
PBT
epoxy glass resin
50...400 mm
II3GD (only PNP and
connector exit)
M18
UK1A
-20°C...+60°C
IP67
PBT
epoxy glass resin
100...900 mm
II3GD (only PNP and
connector exit)
M18
UK1C
IP67
PBT
epoxy glass resin
150...1,600 mm
II3GD (only PNP and
connector exit)
M18
UK1D
IP67
PBT
epoxy glass resin
200...2,200 mm
Teach-in button
II3GD (only PNP and
connector exit)
M18
UK1F
M18
power supply
output
other certifications
front-end material
Vdc
cable
ATEX
M12 pig-tail
Vac
M12 plug
output type
direct diffuse
retroreflective
through beam
temperature range
protection degree
housing material
PNP - NO and NC
NPN - NO and NC
2 x PNP with hysteresis function
PNP - NO / NCNPN - NO / NC
0...10 V
4...20 mA2 x PNP - NO / NC 2 x NPN - NO / NC 1 x PNP - NO / NC + 1x 0...10 V 1 x NPN - NO / NC + 1x 0...10 V
1 x PNP - NO / NC + 4...20 mA
1 x NPN - NO / NC + 4...20 mA
dimensions
2 x NPN with hysteresis function
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
-20°C...+70°C (-20°C...+60°C cULus models)
-20°C...+70°C (-20°C...+60°C cULus models)
New series
cULus &ATEX
New series
cULus &ATEX
New series
cULus &ATEX
New series
cULus &ATEX
New series
NPN and cable
New series
NPN and cable
New series
NPN and cable
New series
NPN and cable
COMPACT
BODY,
IMPRESSIVE
FEATURES!
Ultr
ason
ic S
enso
rs
Applicazione:
Rilevamento diametro bobine
di carta in macchine automatizzate
UT1 - Sensori Ultrasonici M30
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258701
Nota applicativa - UK1 - italiano - Ed.01/2012
Applicazione:
Rilevazione presenza e altezza
piante per macchine agricole
UT1 - Sensori Ultrasonici M30
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258701
Nota applicativa - UK1 - italiano - Ed.01/2012
NewApplication
Note
NewApplication
Note
M.D. Micro Detectors increases its M18 Ultrasonic Sensors family with the UK6 series, characteri-zed by an extremely compact body.
UK6 has a body length of only 6 cm (including connector) and it is able to detect the presence of any colored and shining objects, up to 900 mm, in all applications with a narrow space of installation.
The maximum distance adjustment and the “nor-mally open/normally closed” switching state selec-tion are possible through the remote Teach-in ca-ble, optimizing the installation time, through an easier and rapid adjustment procedure.
It is available either with 4 pins M12 plug or ca-ble version, and also with PNP/NPN output or with analogic output 0…10V or 4…20mA.
M.D. Micro Detectors, in the continuous effort to increase the Ultrasonic Sensor series, is glad to
launch the new UT1 range, which with its excel-lent performances set this product at the top of the market.
The UT1 series introduces a new standard on the market with an extremely compact body, and it is particularly suitable for detecting the presen-ce of objects of any color and shine up to 3,500 mm distance.
The Teach-in button allows the state switching and two adjustment modes (window teach-in and maxi-mum distance adjustment).
We can offer a wide range of models: models with mixed output fitted for the distribution, models with adjustable hysteresis fitted for detection of levels and many others.
Applicazione:
Rilevamento altezza livello in silos
di liquidi e solidi immagazzinati
UT1 - Sensori Ultrasonici M30
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258701
Nota applicativa - UK1 - italiano - Ed.01/2012
NewApplication
Note
Applicazione:
Rilevamento lastre in
macchine per il taglio del vetro
UK6 - Sensori Ultrasonici M18
Corpo corto
Sensori Ultrasonici
Nota applicativa
CAT3IUK1258701
Nota applicativa - UK1 - italiano - Ed.01/2012
NewApplication
Note
COMPACT
BODY,
IMPRESSIVE
FEATURES!
Ultr
ason
ic S
enso
rs
-20°C...+60°C
IP67
PBT
epoxy glass resin
30...300 mm
II3GD
M18 - short housing
UK6A
-20°C...+60°C
IP67
PBT
epoxy glass resin
100...300 mm
II3GD
M18 - short housing
UK6B
-20°C...+60°C
IP67
PBT
epoxy glass resin
150...900 mm
Teach-in cable
II3GD
M18 - short housing
UK6C
IP67NEMA 4X
PBT
epoxy glass resin
250...500 mm
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
Teach-in button
M30
UT1New seriesATEX
New series
cULus &ATEX
New series
cULus &ATEX
New series
cULus &ATEX
M18 - short housing M30
New reduced
blind zone
Teach-in cable
-20°C...+60°C
II3GD
Teach-in cable
power supply
output
other certifications
front-end material
Vdc
cable
ATEX
M12 pig-tail
Vac
M12 plug
output type
direct diffuse
retroreflective
through beam
temperature range
protection degree
housing material
PNP - NO and NC
NPN - NO and NC
2 x PNP with hysteresis function
PNP - NO / NCNPN - NO / NC
0...10 V
4...20 mA2 x PNP - NO / NC 2 x NPN - NO / NC 1 x PNP - NO / NC + 1x 0...10 V 1 x NPN - NO / NC + 1x 0...10 V
1 x PNP - NO / NC + 4...20 mA
1 x NPN - NO / NC + 4...20 mA
dimensions
2 x NPN with hysteresis function
Pro
xim
ity S
enso
rs
MORE
CAPACITIVE IN
OUR FAMILY
M.D. Micro Detectors, in the continuous deve-lopment of the Proximity Sensor range, introduces the new C18 and C30 series that is M18 and M30 Capacitive Sensors which complete the present range.
The M18 version is comprehensive of shielded mo-dels with working range 3…8 mm and unshielded models with working range 3…12 mm, available with PNP or NPN output –NO/NC and cable con-nection or 4 pins M12 plug in version.
Furthermore we have available DC models 10..40 Vdc and AC models 20…250 Vac.
The M30 version is comprehensive of models with stainless steel housing with working range 2…16 mm for the shielded models and 4…25 mm for the unshielded models.New models are also available with rectangular flat body CQ50 and CQ55 series.
One of the main feature is also the extremely com-pact body 7x30x50 mm for the CQ50 series with a working range from 5 mm up to 10 mm; while the CQ55 body is 15x35x57.5 mm with a working range of 4…25 mm.
The CQ50 series is only available with cable exit PNP or NPN version NO or NC function while CQ55 series is available both with cable exit and 4 pins M12 plug, PNP or NPN version with selectable NO/NC.
Application:
detection of exceeding water
in whirlpool tubs
CQ50, CQ55
Capacitive Sensors
Proximity Sensors
Application note
CAT3EFA1256901
Application note - UR and DG models - english - Ed.01/2012
Application:
detection of presence
of food in mangers
CE, CT, C18, C30, CQ50, CQ55
Capacitive Sensors
Proximity Sensors
Application note
CAT3EFA1256901
Application note - UR and DG models - english - Ed.01/2012
NewApplication
Note
NewApplication
Note
Application:
detection of the level
of recycled water
CE, CT, C18, C30, CQ50, CQ55
Capacitive Sensors
Proximity Sensors
Application note
CAT3EFA1256901
Application note - UR and DG models - english - Ed.01/2012
NewApplication
Note
Application:
detection of the level of soaps
and waxes in car washing
CE, CT, C18, C30, CQ50, CQ55
Capacitive Sensors
Proximity Sensors
Application note
CAT3EFA1256901
Application note - UR and DG models - english - Ed.01/2012
NewApplication
Note
Application:
detection of level of powder
in vending machines
CE, CT, C18, C30, CQ50, CQ55
Capacitive Sensors
Proximity Sensors
Application note
CAT3EFA1256901
Application note - UR and DG models - english - Ed.01/2012
NewApplication
Note
-0°C...+60°C
IP67
noryl
noryl
MORE
CAPACITIVE IN
OUR FAMILY
M18 M30 7 x 30 x 50 mm
-25°C...+80°C -25°C...+80°C
IP67 IP67
PEPE /
stainless steel
PE PE
3...8 mm 2...16 mm
3...12 mm 4...25 mm
5/6/7/10 mm
C18 C30 CQ50
Cylindrical
-25°C...+80°C
IP67
PC
PC
15 x 35 x 55 mm
4...25 mm
CubicCQ55New
seriesNew
seriesNew
seriesNew
series
supply voltage
output
other certifications
Vdc
cable
M12 plug
ATEX
Vac
M8 plug
output type
dimensions
standard shielded
standard unshielded
long distance shielded
long distance unshielded
temperature range
standard housing
protection degree
short housing
housing material
miniaturized housing
active head material
NPN - NO
NPN - NC
PNP - NO
PNP - NC
PNP - NO / NC
NPN - NO + NC
DECOUT ®
SCR
0...10 V
4...20 mA
SAFETY
FIRST...
Saf
ety
Applicazione:
Protezione mani in macchinari
atti alla produzione tessile
Reticoli ottici Tipo 2
LS2, LS2_H, LS2_K, SBA, SBH
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
Applicazione:
Controllo accessi nell’area di
carico/scarico in magazzini
Reticoli ottici Tipo 2
LS2, LS2_H, LS2_K, SBA, SBH
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
NewApplication
Note
NewApplication
Note
Applicazione:
Protezione mani in macchinari
di stampa a iniezione
Reticoli ottici Tipo 2
LS2, LS2_H, LS2_K, SBA, SBH
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
NewApplication
Note
Applicazione:
Protezione mani in
impilatori automatici di piastrelle
Reticoli ottici Tipo 2
LS2, LS2_H, LS2_K, SBA, SBH
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
NewApplication
Note
M.D. Micro Detectors, in updating its product ran-ge, is glad to inform you about the introduction of three new safety light curtains series, each one equipped with an integrated control unit: LS2, LS4 and LP4 type.LS2 and LS4 series, respectively belonging to Type 2 (SIL 2 SILCL 2 PL d) and Type 4 ( SIL 3 SILCL 3 PL e) categories, are characterized by a short body and by absence of dead zone on one of the two extremities, so they can guarantee a 40 mm resolution in case of angular installations of models 30 mm and 40 mm resolution.
LS2 series is available in hand protection version (30 mm), presence check version (50 mm and 90 mm) and also in access control version (2,3 and 4 beams), with 1,500 mm maximum controlled height and operating distance up to 12 m.
LS4 series offers also finger protection models (14 m) and a 20 m improved operating distance, together with all LS2 series resolutions and to its 12 m standard range.Moreover, thanks to the master/slave (up to 2 slaves) configuration option, it grants a bigger
flexibility installation, easily fitting on the machine structure through a quick cable connection.
Even for an easier and quicker installation and set-ting up process, LS2, LS4 have been equipped with an anti-interference function, which allows the selection of two different ranges through cable. Such a system avoids any mutual interference trouble between devices.
IP69K protection degree models, LS4_H, LS4_K and LS2_H, LS2_K, are ideal for Food & Beve-rage, Chemical sectors and in every environment where it is necessary to work with hot water jets up to 80°C and 80 bar pressure, thanks to their pipe which close hermetically the barrier inside and thanks to a pre-cabled 10 m cable, which allows an easy installation process.In case of moisture, the perfect solution are LS4-H and LS2_H models, due to their internal self-heating system which allows to work up to -25°C, avoiding in this way moisture on the optics.
LS2
-10°C...+55°C
IP67
PMMA
LS2_K e LS2_H
-10°C...+55°C (LS2_K)-25°C...+55°C (LS2_H)
IP69K
PMMA
Safety light curtains Type 2
Newseries
SAFETY
FIRST...
output
other certifications
type
available functions
cable
M12 plug, 8 wires
M23 plug, 19 wires
ATEX
M12 plug, 5 wires
output type
sensing range
resolution
controlled area height
protection
beams number
protection degree
temperature range
housing material
optic material
2 relays
2 PNP
dimensions
power supply Vdc
Vac
automatic restart
manual restart
EDM
integrated connections for muting sensors
sensitivity adjustment
extended range
master
intermediate slave
final slave
with passive element
0...4 / 0...12 m select.
from 160 to 1,510 mm
hand, body, access
depending on height
cubic 28x30 mm
30 mm, 50 mm, 90 mm, 300 mm, 400 mm, 500 mm
0...3 / 0...10 m
from 160 to 1,510 mm
hand, access
depending on height
cylindrical ø 56 mm
30 mm, 300 mm, 400 mm, 500 mm
2 (EN 61496-1)SIL CL 2 (EN 62061)
PL d (EN ISO 13849 -1)
2 (EN 61496-1)SIL CL 2 (EN 62061)
PL d (EN ISO 13849 -1)
aluminium PMMA, POM-C, stainless steel
emitter and master/slave
single receiver and master
...AND EVEN
AFTER!
Saf
ety
Applicazione:
Protezione dita e mani in aree
automatizzate e catene di montaggio
Reticoli ottici Tipo 4
LS4, LS4_H, LS4_K, SBM
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
NewApplication
Note
Applicazione:
Protezione dita e mani
in presse
Reticoli ottici Tipo 4
LS4, LS4_H, LS4_K, SBM
Sicurezza
Nota applicativa
CAT3IFC1257101
Nota applicativa - FC4 - italiano - Ed.01/2012
NewApplication
Note
LP4 series with Type 4 increased section (SIL 3 SILCL 3 PL e), is typically used in pallet and mo-ving goods fields thanks to its integrated connec-tions which can connect up to 4 muting sensors (single and doubled directions). It offers both hand protections and access control up to 60 m range and a maximum protected height up to 1,800 mm.
LP4 reflective models with passive element, are the right solution for the customers, since they re-duce and fast the cabling phases and they can be installed in reduced spaces where power cable installation is usually difficult.
LP4 models are available both with or without mu-ting function, and also with override functionModels with 2,3,4 beams and 6 m maximum ope-rative distance are also available with passive ele-ment.
Even for an easier and quicker installation and set-ting up process, LP4 has been equipped with an anti-interference function, which allows the se-lection of two different ranges through cable. Such a system avoids any mutual interference trouble between devices.
A wide range of accessories is offered together with light curtains series: mirrors with or without column for perimeter protection, laser pointer for a correct and faster alignment in case of maximum ranges use, columns bringing curtains on standard or spring base, anti-vibration bases capable to fix the curtains on machines like: presses, punches and typically in presence of strong vibrations, stir-rups and cables.
All series are TÜV SUD and CE certified.
...AND EVEN
AFTER!
LS4 LS4_K & LS4_H LP4ER & LP4ER_M LP4PF LP4PT
-10°C...+55°C0°C...+55°C (LS2_K)
-25°C...+55°C (LS2_H) -10°C...+55°C -10°C...+55°C -10°C...+55°C
IP67 IP69K IP65 IP65 IP65
aluminium aluminium aluminium aluminium
PMMA PMMA PMMA PMMA PMMA
emetter (LP4ER), emetter and muting sensors (LP4ER_M)
active element
muting sensors (male)
4 (EN 61496-2)SIL CL 3 (EN 62061)
PL and (EN ISO 13849 -1)
receiver active element
PMMA, POM-C, stainless steel
only LP4ER_M
Safety light curtains Type 4
New series
4 (EN 61496-2)SIL CL 3 (EN 62061)
PL and (EN ISO 13849 -1)
4 (EN 61496-2)SIL CL 3 (EN 62061)
PL and (EN ISO 13849 -1)
4 (EN 61496-2)SIL CL 3 (EN 62061)
PL and (EN ISO 13849 -1)
4 (EN 61496-2)SIL CL 3 (EN 62061)
PL and (EN ISO 13849 -1)
output
other certifications
type
available functions
cable
M12 plug, 8 wires
M23 plug, 19 wires
ATEX
M12 plug, 5 wires
output type
sensing range
resolution
controlled area height
protection
beams number
protection degree
temperature range
housing material
optic material
2 relays
2 PNP
dimensions
power supply Vdc
Vac
automatic restart
manual restart
EDM
integrated connections for muting sensors
sensitivity adjustment
extended range
master
intermediate slave
final slave
with passive element
0...3 / 1...16 m sel. (ris.14 mm); 0...4/ 0...12 m e
0...10 / 3...20 m select. 0...2 / 1...5 m (ris.14 mm);
0...8 / 3...17 m select. 0...6 / 1...16 m select.;
8...30 / 18...60 m select.;
from 144 to 1,510 mm from 160 to 1,510 mm510 mm, 610 mm, 810 mm,
910 mm, 1,210 mm ((LP4ER)da 310 a 1.810 mm (LP4ER _M)
finger, hand, body, access finger, hand, access access
depending on height depending on height depending on height
cubic 28x30 mm cylindrical ø 56 mm cubic 50x60 mm
14 mm, 30 mm, 50 mm, 90 mm, 300 mm, 400 mm, 500 mm
14 mm, 30 mm,300 mm,
400 mm, 500 mm40 mm, 300 mm, 400 mm, 500 mm
0...6 m
510 mm, 810 mm, 910 mm
access
2, 3, 4 beams
cubic 50x60 mm
500, 400, 300 mm
0...6 m
510 mm, 810 mm, 910 mm
access
2, 3, 4 beams
cubic 50x60 mm
500, 400, 300 mm
emitter
single receiver and master
A WORLD OF
ACCESSORIES
Acc
esso
ries
M.D. Micro Detectors offers a wide range of acces-sories for any type of sensors.
A wide range of accessories is offered together with light curtains series: mirrors with or without column for perimeter protection, laser pointer for a correct and faster alignment in case of maximum ranges use, columns bringing curtains on standard or spring base, anti-vibration bases capable to fix the curtains on machines like: presses, punches and typically in presence of strong vibrations, stir-rups and cables.
M.D. Micro Detectors offers new connection cables at enhanced temperature.Cables are fitted with M12 plug in and have a range of temperature extended from - 25 up to +105°C.
We have available 5 m, 10 m cable length, 4 wi-res models , axial and 90° versions.
They can match with inductive sensors ET (ETM1, M12 housing; ETK1, M18 housing) and PF_26 (PFM1_26, M12 housing; PFK1_26, M18 housing).
A New range of cables cCSAus certified is also available for North America market.
The new cCSAus certified cables, M8 and M12 plug in type, are available with following cable length:
• 5, 10, 15m for M8 plug in models , both 3 and 4 wire, axial and 90° versions • 5, 10m M12 plug in models, 4 wires, axial and 90° versions.
These new cables can be used with any type of M.D. sensors both proximity and photoelectric to make easier export of your machinery on the North American market
Accessories for Safety
Light Grids
Accessories
Data sheet Cod. CAT3EDS1259601
Datasheet - Safety acc. - english - Ed.01/2012
Newdatasheet
4 wires
3 wires 5 -10 - 15
4 wires 5 -10 - 15
M12
4 wires 5 -10 - 15
C12M/0B-***A1HT
CD08/0A-***A1US
C12M/0B-***A1US
C12M/0B-***C1HT
CD08/0A-***C1US
C12M/0B-***C1US
CD08/0B-***A1US CD08/0B-***C1US
M12
5 -10
M8
3 wires 5 -10 - 15
4 wires 5 -10 - 15
4 wires 5 -10 - 15
CD08/0A-***A5US
C12M/0B-***A5US
CD08/0A-***C5US
C12M/0B-***C5US
CD08/0B-***A5US CD08/0B-***C5US
M12
M8
New series
Extended temperature connectors (-25°C...+105°C)
nr. of wires LED axial right angle lenght (m)connector
Connectors with PVC cable and certification
Connectors with PUR cable and certification
nr. of wires
nr. of wires
LED
LED
axial
axial
right angle
right angle
lenght (m)
lenght (m)
connector
connector
New series
New series
Deflector mirrors
Brackets LP-BOXLaserpointer
Accessories for Safety Sensors
Newproducts
Newproducts
Newproducts
Newproducts
Connectors
Copyright:
M.D. Micro Detectors S.p.A.
con Unico Socio
Strada S. Caterina 235
41122 Modena - Italy
tel. + 39 059 420411
fax + 39 059 253973
www.microdetectors.com
Since 1971 M.D Micro Detectors S.p.A. deve-
lops and produces a wide range of industrial
sensors
M.D. Micro Detectors S.p.A is a Company rich
in terms of human, professional and mate-
rial tradition and heritage, which is nowa-
days a worldwide synonymous of technology,
quality, reliability, continuity, service and
innovation.
It will be enough, just to reinforce the idea of
innovation leading the whole Company spirit,
to think that it has been the first industrial
reality to produce the photoelectric sensor
M18, today considered an international stan-
dard, and also one of the first companies to
realize different types of area sensors.
Since ever quality and reliability of the pro-
ducts, based also on the customer satisfac-
tion requirements, are the main drivers of the
Company strategy.
The products portfolio is composed of 6 seg-
ments:
Photoelectric Sensors
Proximity Sensors
Ultrasonic Sensors
Area Sensors
Safety Devices
Accessories
M.D Micro Detectors S.p.A. is able, moreo-
ver, to propose and realize versions and
customizations of the products already
listed in the catalogue, basing them on
specific Customers requirements, and it is
also in measure to develop innovative solu-
tions for industrial applications using its own
technology.
The production and development processes,
based on Lean Manufacturing principles,
are subject to continuous controls and all
products are always double checked.
Therefore, the extreme M.D Micro Detectors
S.p.A. quality has been proven by all certi-
fications the Company has got in very short
time: the whole System is ISO 9001:2008
norms complying, and a huge amount of
products is CE,ATEX, cULus, Diversey,
TÜV and Ecolab certified.
enjoy ourNEWSLETTER SERVICE:
Copyright:
M.D. Micro Detectors S.p.A.
con Unico Socio
Strada S. Caterina 235
41122 Modena - Italy
tel. + 39 059 420411
fax + 39 059 253973
www.microdetectors.com
We will also attend the
Italian SPS event in Parma
from 21st to 23rd May 2013
41 YEARS of
success!