md-1210cmx manual
TRANSCRIPT
-
8/13/2019 MD-1210CMX Manual
1/20
OWNER S MANUAL
12.1 TFT-LCD DVD/SD/USBCOMBO MONITOR
M
PLAY AV MENU
POWER
MD-1210CMX
-
8/13/2019 MD-1210CMX Manual
2/20
-
8/13/2019 MD-1210CMX Manual
3/20
Contents
3
Caution
Features and Controls
Power and Mode Selection
Releasing The Monitor
Mute Function
Picture Control
Contrast/Brightness/Color/FM
DVD Setup
Setup Menu
General Setup
TV Aspect RatioAn gl e V ie wi ng
OSD Language
Screen Saver
Au di o Se tu p
Dolby Digital Setup
Equalizer SettingsVideo Setup
Quality
Preferences Setup
TV TypePB CAu di oSubtitleDisc MenuParentalDefault
Password SetupPassword Mode
Password Change
4
6
8
10
12
13
14
16
21
22
23
6
12
18
21212121
22
22
2323
DVD Functions
Eject
Vol+/Vol-
Mute
Play or PauseAu di o
Stop
Ar ro ws
Setup
Menu
Display
Number Buttons
Subtitle
Title
SlowFast Reverse Searching
Fast Forward Searching
Previous
Next
Repeat A-B
Repeat
NTSC/PALAn gl e
PB C
ZoomGO TO
Connection Diagram
Installation
Disc Information
Troubleshooting
Specifications
24
24
24
24
25
26
27
27
28
29
30
31
24
24
2525
25
26
27
28
29
29
3030
31
31
34
35
36
37
10
10
10
Turning on The Monitor
11AV m od e
13
14
14
15
15
16
18
Remote Control
Monitor/DVD Player
14
33
SD/USB Functions 32
-
8/13/2019 MD-1210CMX Manual
4/20
Caution
Please read and observe all warnings and instructions in this manualand those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
WARNING
WARNING
CAUTION
The lightning bolt with arrowhead inside in an equilateraltriangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may beof sufficient magnitude to constitute a risk of electric shock topeople.
The exclamation point inside an equilateral triangle is intendedto alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanyingthe product.
Installation of all TV monitorsmust be out of the driver sfield of vision.
Do not try and service thesep ro du ct s y ou rs el f, aqualified service center orfactory service center for allrepairs.
locale
Be careful not to drop orapply under pressure to thefront panel of your videomonitor. If the screen cracksdue to misuse, your warrantywill be void!
Do not mount the product whereit will obstruct the deployment ofthe airbag or in an area where it
would affect the driver s abilityto control the vehicle. Also becareful to avoid mounting theproduct where it can becomehazardous during sudden stopsor in the event of an accident.
Use extra caution with any liquidsin your car. If you or your childspills any liquid on these products,pull your vehicle to the roadsideand turn the key off to disconnect
or wipe the products with a towel. Do notoperate the equipment until all liquids haveeither evaporated or you have had the monitorinspected at a service center by a qualifiedtechnician. Severe harm or danger can result.
Use only a damp cloth to cleanthe screen and use only purifiedwater on the cloth. wring out allexcess water prior to wiping the
screen. Do not use any cleanersor chemicals to clean the screen.In most cases a dry cloth will do!
POWER AV
M EN U
,
4
,
37
D C 1 2 V
4 : 3
2 4 0 0 x 6 0 0
N T S C / P A L A u t o S e l e c t
D V D - A V 1 - A V 2
1 E A
W i t h s h r o u d : 1 5 . 1 ( L ) X 1 3 . 9 ( W ) X 3 . 5 ( H ) i n c h e s
Power
Screen Format
Resolution Pixel
Color System
A/V Input
A/V Output
Dimension
Note: This equipment has been tested and has been found to complywith the limits for a Class A digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference. In some cases, the user willbe required to correct the interference at his own expense.
SPECIFICATIONS
W i t h o u t s h r o u d : 1 4 . 8 ( L ) X 1 3 . 6 ( W ) X 2 . 5 ( H ) i n c h e sDimension
-
8/13/2019 MD-1210CMX Manual
5/20
-
8/13/2019 MD-1210CMX Manual
6/20
M
PLAY AV MENU
POWER
Features and Controls
6
Disc Information
DVD features
DVD discs provide high-resolution images with high-quality sound. This DVD playercan play not only DVD discs of various versions, but also S-VCD, VCD, audio CD andMP3 discs.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. Inaddition, a CD or a CD-RW which was recorded on special software cannot be played.
Region code
Your DVD player is designed and manufactured to region management informationthat is recorded on a DVD disc. Please check the region code.1: North America 2: Japan 3: Korea and Southeast Asia4: Australia, Mid & South America 5: Russia 6: China
How to handle the disc
Don t touch the shiny side of the disc (the side with the embedded information).Don t stick a label or a glue-based note on either side of the disc.Don t use discs that have glue or a damaged label with exposed adhesive residue.It might result in damage to your DVD player.Don t put discs in the sunshine.
Park your car in the shade.
How to handle the discs
Only use round discs. Discs with other shapes like a star, a heart, etc. may causedamage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dryone. Before playback, wipe the disc outward from the center with a clean cloth. Do notuse any type of solvent such as thinner, benzene, commercially available cleaners or
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
35
Remote Control
Wireless Headphones(Not Included)
Monitor/DVD Player
MONITOR
Vol+
Vol-
Monitor/DVD Player
-
8/13/2019 MD-1210CMX Manual
7/20
Features and Controls
7
Installation
34
M
PLAY AV MENU
POWER
Caution
Do not bring magnetic devicessuch as credit cards or magneticcards near the monitor.
....X
Dome Light Button
POWER Button
AV Select Button
MENU Button
+/- Buttons
PLAY/PAUSE Butto n1. Open the package and check that these items are presents.
INSTALLATION PLATE UNIT SCRE W A SCREW B
2. Connect the external compoments to the RCA cable or AV output.(Refer to the connection diagram on page 33)
3. Match the position of installation bracket andinstallation plate with screw A.
4. Tighten the unit with the suppliedscrew B.
EJECT ButtonDisc loading slot
SD Input USB Input
M
PLAY AV
MENU
POWER
Dome Light Button
FAST Forward/Reverse Button
RESET
R LA U DI O V I DE O
AV2 INPUTS
SD USB
-
8/13/2019 MD-1210CMX Manual
8/20
-
8/13/2019 MD-1210CMX Manual
9/20
9
Features and Controls
32
SD/USB Functions
A- B (r ep ea t fr om A t o B )
VOL-/+ button
AU DI O
ENTER
ZOOM
UP/DOWN/RIGHT/LEFT ARROWS
PLAY/PAUSE
GO TO
STOP
SKIP FORWARD/BACK
FAST FORWARD/REVERSE PLAY
Use these buttons to select either fastforward or fast reverse playback.
Use this button to select the beginningand end of a track which you wish to haverepeat in playback.
Use to incease or decrease volume level.
Use this button to select one of theaudio soundtracks programmed on aDVD disc. It is alse used to select the
audio output mode for the DVDplayback.
Press this button to confirm the itemyou have found and highlighted usingthe arrow buttons. Usually this is doneto confirm a selection or item to beplayed on the DVD.
If your DVD disc supports zooming in
to see the program differently, pressingthis button will enable you to changethe amount of zoom.
Use thes buttons to navigate thevarious menus and screens for themonitor and DVD systems.
To start playback of a disc, press thisbutton. Press again to pause theplayback. If playback is paused, press
this button to resume playback.
Use to search for a title or a chapter onyour DVD disc.
Press this button to stop the playbackof the current disc.
Use these buttons to skip to the nextor last track, chapter or file on thedisc in the player.
R ET U R N
SET U P
Press this button to display the Setupmenu. The Setup menu enables youto enter the settings required for theunit to work properly.
REPEAT
Press this button to change the playbackmode to repeat.
Press this button to return to the root menu
1. When USB or SD is inputed, the monitor will be displayed as shown below. But whenyou input USB that the function can not change into SD state (only the SD is
moving). And you can select the desired menu by
2.
pressing the MODE button on theremote control of monitor.
Use the (arrow and ENTER) buttons to select and set desired settings.
00:00
000/003
00 :0 0 k bp s
S
\
..
..
-
8/13/2019 MD-1210CMX Manual
10/20
-
8/13/2019 MD-1210CMX Manual
11/20
Power and Mode Selection
11
DVD Functions
Repeat
Pressing REPEAT button changesthe play mode as follows:
[DVD]
OSD CONDITION
Chapter
Title
Al l
Repeat chapter
Repeat title
Al l
Repeat off
[VCD]
The REPEAT button does not functionwhen a VCD disc is being played.
Pressing REPEAT button changesthe play mode as follows:
[AUDIO]
OSD CONDITION
Track
Al l
Repeat single
Al l
Repeat off
[MP3]
Pressing REPEAT button changesthe play mode as follows:
OSD CONDITION
Repeat One
Repeat Folder
Folder
Single
Repeat folder
Al l
Random play
Shuffle
Random
Single
Repeat folder one time
Single play
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSCand PAL formats.
Angle
Some DVD s are recorded with additional footage which allows you to view a scene
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu(see page 14) and the disc has this option,an angle mark will be displayed onthe screen. When that occurs, press the ANGLE button to see these alternate viewingangles.
30
Selecting an AV mode
1. Turn the power ON on the unit and on the external devices.
2. Select th e DVD, AV1 or AV2 mode by pre ssing the AV Select button onthe unit or on the remote control.
3. Play the external device.
-
8/13/2019 MD-1210CMX Manual
12/20
Picture Control
12
DVD Functions
Prev( )
Press this button to advance the player from the current chapter.
to the previouschapter
[DVD]/[VCD]
[AUDIO]/[MP3]
Press this button to move to the previous track.
Next( )
P re ss th is b ut to n to a dva nce th e p la ye r f rom t he cu rre nt ch apt er .to the next chapter
[DVD]/[VCD]
[AUDIO]/[MP3]
Press this button to move from the current track .to the next track
Repeat(A-B)
You can set the player to repeat a segment over and over until you cancel it. To dothis, you mark the beginning of the desired segment (A) and the end of segment (B).The selected segment will berepeated automatically until canceled.
[DVD]/[VCD]/[AUDIO]
29
OSD CONDITION
A
A B
Start point of repeat
Ending point repeat function
To adjust CONTRAST, BRIGHTNESS, COLOR or FM pr ess the MENU butto n untilyou arrive at the screen for that item. Use the arrow buttons to adjust the value.Press the MENU button to make another adjustment or leave the MENU system.
Contrast/Brightness/Color/FM
CONTRAST
BRIGHTNESS
COLOR
50
50
50
1. Bring up the on-screen function menu by pressing the MENU button on the unitor the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you seethe item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
FM
87.7
(FM function added 87.7 87.9 88.1 88.3 88.588.7 88.9 89.1M H z)
-
8/13/2019 MD-1210CMX Manual
13/20
DVD Setup
Setup Menu-Main PageWhen the button is pressed, the setup menu will be displayed as shownbelow. Select the menu category and make changes according to your preferences.
SETUP
1 . P re ss t he b ut to n i f t he d is c i s p la yi ng .STOP
2 . P re ss t he b ut to n t o d is pl ay s et up m en u.SETUP
3. Use the (arrow and ENTER) buttons to select and set desired settings.
4. Press the button again to turn off the setup menu.SETUP
13
TV DisplayV DisplayAn gl e Ma rkngle MarkOSD LangSD LangScreen Savercreen Saver
PSOnENGOn
Go To General Setup Pageo To General Setup Page
General Setup Pageeneral Setup Page
DVD Functions
Fast Reverse Searching( )
Pressing FR button repeatedly changesthe play mode as follow:
[DVD]
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
Pressing FR buttonchanges the play mode as follow:
repeatedly
[AUDIO]
[MP3]
Pressing FR buttonchanges the play mode as follows:repeatedly
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
Fast Forward Searching( )
Pressing FF button changesthe play mode as follow:
repeatedly
[DVD]
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
Pressing FF buttonchanges the play mode as follow:
repeatedly
[AUDIO]/[VCD]
[MP3]Pressing FF buttonchanges the play mode as follows:
repeatedly
FF 16X
FF 32X
PLAY
8X searchforward
16X searchforward
32X searchforward
Play
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
FF 16X
FF 32X
PLAY
8X searchforward
16X searchforward
32X searchforward
Play
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
FF 16X
8X searchforward
16X searchforward
28
FF 32X
PLAY
32X searchforward
Play
-
8/13/2019 MD-1210CMX Manual
14/20
DVD Setup
General Setup1. TV Aspect RatioIn the Setup function called TV Display, you set the player to output the video signal at thesame aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B(Letterbox).
Normal / PS 4:3 PAN SCANChoose this setting if you want the movie to fill the entire screen.(This might mean that the left and right edges won t be seen)
Normal / LB 4:3Choose this setting if you want to see the movie in its original aspect ratio.(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREENChoose this setting if your DVD Player is connected to a widescreen TV.(This opition is available only if the disc has a 16:9 display aspect ratio.)
2. Angle ViewingSome DVD discs contain programming which allows youto view a scene from a few different camera angles. Youcan tell when a scene is so recorded when an Angle Markis displayed on the screen. This mark will only appear if youhave enabled the Angle Mark featurein the DVD Setup menu.
On: When selected, the screen will be shown with
angle mark.
Off: When selected, no angle mark is shown onthe screen.
3. OSD Language
Use this option to set the OSD language.When selected, change to set the on-screen displaylanguage.
14
Ang le M arkngleMarkOSD LangSD LangScreen Savercreen Saver
OnENGOn
Set TV Display ModeetTV Display Mode
General Setup Pageeneral Setup PageNormal/LBWide
TV DisplayV Display PS Normal/PS
OSD LangSD LangScreen SavercreenSaver ENGOn
Set Angle MarketAngle Mark
General Setup Pageeneral Setup Page
OffTV DisplayV Display PS
Ang le M arkngle Mark On On
Screen Savercreen Saver On
Set OSD Languageet OSDLanguage
General Setup Pageeneral Setup PageTV DisplayV Display PS
Angl e Ma rkngle Mark OnOSD LangSD Lang ENG
EnglishKorean
FrenchGerman
ItalianSpanish
PortugueseDutch
EnglishKoreanFrenchGermanItalianSpanishPortugueseDutch
DVD Functions
Subtitle(SUB-T)
This button is used to select the language for the on-screen display system.(This title menu may vary, depending on the particular DVD.)
[DVD]
OSD
1 / 2
Title
Slow( )
27
Used to display the title menu of the loaded DVD disc.This function is only present on discs which support it.
[DVD]
[DVD]/[VCD] CONDITION
1 / 4
1 / 8
2X slow forward
4X slow forward
8X slow forward
Use this button to play a disc in slow-forward orslow-reverse. Slow playback can be done at fivedifferent speeds. Pressing this button repeatedlydecreases the speed in steps. Pressing a sixthtime returns playback to the normal speed. 1 / 16
1 / 2
1 / 4
1 / 8
1 / 16
Play
16X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
Play
1 / 32 32X slow forward
1 / 32 32X slow rewind
-
8/13/2019 MD-1210CMX Manual
15/20
DVD Setup
Audio Setup
4. Screen Saver
The screen saver is useful to prevent your displayfrom becoming damaged. The screen saver pictureappears when you leave the DVD player in stop modefor about two minutes.
15
Ang le M arkngleMarkOSD LangSDLang OnENG
Screen SavercreenSaver
General Setup PageeneralSetup PageTV DisplayV Display PS
Go To Speaker Setup Pageo To Speaker Setup Page
Au di o Se tu p Pageudio Setup PageSpeaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Speaker SetupSPDIF SetupDolby Digital SetupChannel DelayEqualizer3D Processing
OffScreen Savercreen Saver On On
DVD Functions
Display
P re ss in g t he D IS PLAY o n t heremote control changes the play mode asfollows:
button[DVD]
OSD CONDITION
Title Elapsed
Title Remain
Chapter Elapsed
Display the Title Elapsed
Display the Title Remain
Display the Chapter Elapsed
[VCD]
Whenever press the button,title chapterwill be displayed as follows:
Pressing the display button displaysinformation about the current CD on thescreen as follows:
[AUDIO]
OSD CONDITION
Single Elapsed
Single Remain
Display the single elapsed
Display the single remain
Display the total elapsed
[MP3]Your DVD player will display the counterautomatically when you play the MP3 disc.
Number Buttons
The 0 through 9 number buttons are used to enter the number of the track, the numberof the DVD chapter, the time, the date, etc.
26
OSD CONDITION
Single Elapsed
Single Remain
Display time
Left display time
No sign
Chapter Remain
Display Off
Display the Chapter Remaining
No sign
Display Off
Total Elapsed
Total Remain Display the total remaining
[DVD]
Select a track by pressing thecorresponding number button.
[AUDIO]
You can select a track in the folder by
pressing the corresponding number button.
[DVD]
OSD CONDITION
Se le c t T ra ck : __ Se le ct t r ac k n o
OSD CONDITION
__ :_ _ Se le ct tr ac k no
-
8/13/2019 MD-1210CMX Manual
16/20
Dual MonoUse this function to set the input audiosignal to match your speaker setup.
DynamicUse this function to change the settingfrom the factory.
Set DRC OffetDRC Off
Dual Monoual Mono STRDynamic
Dolby Digital Setupolby Digital SetupL-MonoR-Mono
Dual Monoual Mono Stereo
Mix-Mono
Dolby Digital Setupolby Digital SetupDynamic
FULL
3 / 4
1 / 2
1 / 4
OFF
1. Dolby Digital Setup
Dynamic
Dual Mono (1 + 1) Setupual Mono 1 + 1 Setup
Dolby Digital Setupolby Digital SetupL-MonoR-Mono
Dual Monoual Mono STR Stereo
Mix-Mono
DVD Setup
Show below are two examples of Audio Setups.
Go To Dolby Digital Setupo ToDolbyDigital Setup
Aud io Set up Pag eudio Setup PageSpeaker SetupSPDIF SetupDolby Digital Setup
Channel DelayEqualizer3D Processing
Speaker SetupSPDIF SetupDolbyDigital SetupChannelDelayEqualizer3D Processing
Set Stereo Setupet StereoSetup
STR
16
Go To Equalizer Pageo ToEqualizerPage
Aud io Set up Pag eudio Setup PageSpeaker SetupSpdif SetupDolby Digital SetupChannel DelayEqualizer3D Processing
Speaker SetupSpdifSetupDolbyDigital SetupChannelDelayEqualizer3D Processing
2. Equalizer Settings
Bass Boostass BoostSuper BassuperBassTreble Boostreble Boost
OffOffOff
Select Equalizer Typeelect Equalizer Type
Equalizer Pagequalizer PageRockPopLiveDanceTechnoClassicSoft
EQ TypeQ Type None None
DVD Functions
Stop( )
In DVD mode, Press STOP to stop playback.To resume playbac k, press PLAY/PAUSE. Ifyou press STOP and then PLAY/PAUSE twice,the player will begin playback at the firstscene of the movie.
[DVD]/[AUDIO]
In MP3 mode, Pressing STOP will stopaudio playback. Press PLAY/PAUSE to beginplayback of the first title on the disc.
th e
[MP3]
Menu
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,depending on the programming of the disc.
25
[DVD]
OSD CONDITION
1 Time Press Play Key To Continue Stop
OSD CONDITION
1 Time Stop Stop
Arrows( / / / )
In addition to navigating the various menus, you can use the arrow buttons to define the areaof the screen you want to enlarge in ZOOM mode.
[DVD]
Af te r pr es si ng ST OP bu tt on , se le ct th e de si re d f ol de r an d s et th e co nd it io n by pr es si ngENTER button.
Disc Stop2 Time
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVDsettings to suit your equipment and preferences.
[MP3]
-
8/13/2019 MD-1210CMX Manual
17/20
DVD Setup
EQ Equalizer TypeIn this menu you can choose the desired preset
equalizer mode.(Choose from Rock, Pop, Live, Dance, Techno,Classic or Soft)
Bass Boost
The Bass Boost function increases the volumelevel of the bass frequencies.
Super BassSuper Bass Boost further increases the volumelevel of the bass frequencies.
Treble BoostTreble Boost increases the volume level of the upperfrequencies.
17
Bass Boostass BoostSuper BassuperBassTreble BoostrebleBoost
OffOffOff
Select Equalizer TypeelectEqualizerType
Equalizer PagequalizerPageRockPopLiveDanceTechnoClassicSoft
EQ TypeQ Type None None
Super BassuperBassTreble BoostrebleBoost OffOff
Boss Boostoss Boost
Equalizer PagequalizerPageEQ TypeQ Type None
OffBass Boostass Boost Off On
Treble Boostreble Boost Off
Super BassuperBass
Equalizer Pagequalizer PageEQ TypeQ Type None
OffBass Boostass Boost Off OnSuper Bassuper Bass Off
Treble BoostrebleBoost
Equalizer Pagequalizer PageEQ TypeQ Type None
Off
Bass Boostass Boost OffOnSuper Bassuper Bass OffTreble Boostreble Boost Off
DVD Functions
Eject
Audio
Change the audio output format.(A the disc supports available audiotype.)
vailable only if
24
[DVD]
Changes the audio output format.(Available only of the disc supports available audiotype.)
[VCD]/[AUDIO]
OSD CONDITION
Mute Mute
Mute offMute off
Vol+/Vol-
Use these buttons to adjust the audio output level of the speaker from 0 to 100.
Mute
Press MUTE to turn off the audio part of thecurrently playing program. Press it again toreturn the audio volume to the level at whichyou were last listening.
OSD CONDITION
Play Disc
Pause
Play or Pause( )
When this button is pressed, the disc is ejected. When this button is pressed for morethan 3 seconds, the disc is unconditionally ejected. Use this function if you encounterdifficultly ejecting a disc.
An in va li d bu tt on pr es s.
[MP3]
OSD CONDITION
2 Channel
5.1 Channel
1 / 2 : Ac3 2CH English
2 / 2 :Ac3 5.1CH English
OSD CONDITION
Stereo
Mono Left
Stereo
Mono Left
Mono Right
Mix Mono
Mono Right
Mix Mono
Whenever this button is pressed, the modeswitches from pause to play or play to pause.
-
8/13/2019 MD-1210CMX Manual
18/20
DVD Setup
Video Setup
Sharpness can be adjusted by highlighting it in the menu and then using theUP/DOWN arrow buttons to increase or decrease the sharpness.
In the Video Setup, you can make adjustments to various elements of the picture quality.
18
BrightnessContrastGamma0000None
Color
Vi de o Q ua li ty Set upideo Quality SetupMediumLow
Color MID High
HueSaturationLuma DelayumaDelay
00001 TT
Picture Quality
Vi de o S etu p P ag eideo Setup PageC om po ne nt Y UV
Quality
Divx VOD
Component YUVQualityDivx VOD
Go TO Video Quality Setup Pageo TO Video QualitySetup Page
DVD Setup
Password Setup
1. Password Mode
In the Password setup, you must first enter the current 6-digit passcode, andthen you have the opportunity to change it. The factory default passcode is .
Once you have changed and confirmed the password, press the ENTER button.
136900
2. Password Change
23
Password
Password Modeassword Mode
Password Setup Pageassword Setup PageOffPassword Mode Onassword Mode On On
Change Passwordhange Password
Password Setup Pageassword Setup PagePassword Mode Onassword Mode On OnPassword Change Old Password
New Password
Confirm PWD
OK
Password Setup, which is required for using the Parental Controls settings,is divided into two modules: Turning on the Password function, and settinga Password. The first step is to turn it on in the Password Mode setting.
BrightnessContrastGamma0000None
Color
Vi de o Q ua lit y S et upideo Quality SetupMediumLow
Color MID High
HueSaturationLuma Delayuma Delay
00001 TT
Brightness
Use this option to adjust the display brightness. When you reach desiredbrightness level, use the / buttons and press the ENTER button.
Vi de o Q ua lit y S et upideo Quality Setup
HueSaturationLuma Delayuma Delay
00001 TT
Brightness
Brightness 0
BrightnessContrastGamma0000None
Color MID
Brightness
Please Enter Old Passwordlease Enter OldPassword
-
8/13/2019 MD-1210CMX Manual
19/20
ContrastUse this option to adjust the contrast level.
Use the / buttons and press the ENTER button, when you reach thedesired contrast level. The contrast control increases or decreases the ratio ofbright and dark screen sections.
BrightnessGamma
00None
Contrast
Vi de o Q ua lit y S et upideo Quality SetupColor MID
HueSaturationLuma Delayuma Delay
00001 TT
Contrast 00
Contrast
Contrast 0
DVD Setup
19
DVD Setup
Use the Disc Menu option to select the displaylanguage for a DVD s disc menu display language.(not the same as the players menu)
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Disc Menu.4. Press the ENTER button.5. Press the / buttons to select Disc Menu.
5. Disc Menu
The Parental Control settings limit the player to only play content at or below a certainmovie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.In this menu item, you can set what is the highest level of rating you wish to allow theunit to play.
1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Parental.4. Press the ENTER button.5. Press the / buttons to select desired
parental level.
6. Parental
If you select RESET when in the DEFAULT settingsmode, all the settings of the Setup Menu will bereturned to the factory defaut settings, except forParental Level, Region and Password values.
1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Default.4. Press the ENTER button to select Reset.
7. Default
22
PBCAudioSubtitleOnENG
Preferred Menu Languagereferred MenuLanguage
Preference Pagereference PageFrenchSpanish
TV TypeV Type Ntsc English
ParentalDefaultJapaneseKoreanChinese
ThaiRussianDisc Menui scMenu ENG
PBCAudioSubtitleOnENG
Load Factory Settingoad FactorySetting
Preference Pagereference PageTV TypeV Type Ntsc
Disc Menui scMenu ENGParentalResetefault
PBCAudioSubtitleOnENG
Set Parental Controlet Parental Control
Preference Pagereference PageTV TypeV Type Ntsc 1 KID SAF
2 G3 P G4 PG 135 PGR
6 R7 NC178 ADULT
1 K ID SAF2 G3 PG4 P G 1 35 PGR6 R7 NC178 ADULTParentalDefaultDisc Menui scMenu ENG
Gamma
Hue
Select screen hue level using the direction / buttons and press the ENTER button.
BrightnessContrast 0000
Gamma
Vid eo Q ual ity Set upideo QualitySetup
MediumLow
Color MID
HueSaturationLuma DelayumaDelay
00001 TT None
Gamma None High
BrightnessContrast 0000
Hue
Vid eo Qua lit y S etu pideo QualitySetupColor MID
SaturationLuma DelayumaDelay 001 TT
Gamma NoneHue 00
Hue
Hue 0
In some systems, you might experience a loss in the strength of the dark sections ofthe displayed picture. This can be helped by changing the Gamma setting, whichboosts the dark level but leaves the other levels unchanged.
-
8/13/2019 MD-1210CMX Manual
20/20