mcc live tooling brochure - marubeni live tooling brochure rev.1.0.2...mcc live tooling brochure...
TRANSCRIPT
1DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
MCC Live Tooling
Brochure
2DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
1. B-axis Modular Tooling System for L220 and L32
2. Slitting Saw Attachment for L32 Back-work
3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
5. Tandem End-Face Spindle for Backwork for L220
Outline
3DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
L220 type XII1. B-axis Modular Tooling System
4DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
1. B-axis Modular Tooling System L32 type XII
5DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
1. B-axis Modular Tooling System L32 type XII
Part#: BT-GSE-L32-T12-ASM
6DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
2. Slitting Saw AttachmentPart#: BT-SSA1000-ASM
L32 series
Back-work
7DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
2. Slitting Saw AttachmentPart#: BT-SSA1000-ASM
L32 series
Back-work
8DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
Special Arbor for Hob cutter is required
separately
• Max. Cutter OD: 32mm
• Max. Cutter Width: 26mm
• Max. Helix Angle: +/- 2 Deg.
3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM
L32 type VIII,X
L220 type VIII,XPart#: BT-SSA1000-ASM
9DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
[Spec for Spur gear]
• 1~2 Deg. Helix Angle
can be obtained.
• Both-ends support
arbor is available.
L32 type VIII,X
L220 type VIII,X
3. Hobbing on L220/L32 Gang by BT-SSA1000-ASM
10DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
L32 type VIII,X
L220 type VIII,XPart#: BT-HBA1080-L2032
11DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
L32 type VIII,X
L220 type VIII,X
• Arbor OD: 8mm
• Max. Cutter OD: 32mm
• Max. Cutter Width: 32mm
• Max. Helix Angle: +/- 45 Deg.
• Supported Solid Arbor
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
Part#: BT-HBA1080-L2032
12DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
L32 type VIII,X
L220 type VIII,X
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
13DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
L32 type VIII,X
L220 type VIII,X
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
14DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
4. Hobbing by Supported Solid Arbor Spindle with GSE3310
L220 type XII
15DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
5. Tandem End-Face Spindle for Backwork
L220 type X, XIIPart#: BT-TES1000
16DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
5. Tandem End-Face Spindle for Backwork
L220 type X, XII
• Gear Driven Construction
• 2 - ER11 Spindle
• Can be used with
previous L20X as well
Part#: BT-TES1000
17DESIGNED BY MCC R&D GROUPMCC Live Tooling Brochure Rev.1.0.2
5. Tandem End-Face Spindle for Backwork
L220 type X, XII