mazak integrex 300 4s - maschinen-kistner.de · 2017. 4. 28. · mazak . integrex 300 4s / 1500 u ....
TRANSCRIPT
-
MAZAK INTEGREX 300 4S / 1500 U
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
-
2
MACHINE INFO
Manufacturer
Type
Year of manufacture
Control
Machine number
Automatic cutting
New milling spindle
MAZAK INETGREX 300 4S / 1500 U | | 2
with a complete and extensive set of tool holders and tools
-
EQUIPMENT
| 3 MAZAK INETGREX 300 4S / 1500 U |
Main spindle and counter spindle B-axis Y-axis 5 axes simultaneous 40-slot tool magazine 2 hydraulic three-jaw chucks KITAGAWA B-210 1 collet chuck Documentation / Machine parameters on CD and much more… (see below)
-
TECHNICAL DATA Capacity Chuck size
Maximum swing
Swing over cross slide
Swing during Y-axis process
Maximum machining diameter
Bar work capability
Max. machining length
Max. support weight
Main spindle Rotating speed
Acceleration and deceleration time
Trough-hole diameter
Motor output (half-hourly rating)
Max. torque Secondary spindle Rotating speed
Acceleration and deceleration time
Trough-hole diameter
Motor output (half-hourly rating)
Max. torque Milling head Type
Tool shank type (milling/turning)
Tool size O.D. turning I.D. turning Milling tool (max.)
| 4 MAZAK INETGREX 300 4S / 1500 U |
-
| 5 MAZAK INETGREX 300 4S / 1500 U |
90° indexing time
Motor output (20% ED)
Maximum torque (20% ED)
Milling spindle speed
Acceleration and deceleration time
Orientation time (12.000 0) Feed axes Rapid feed rate X / Y / Z
Movement stroke X / Y / Z Others Coolant tank capacity
Power requirement (continuous)
Air pressure
Total air capacity Machine dimensions and weight, approx. Machine (with magazine, excl. oil pan) Height of centers Lenght Width Height
Floor space required
Weight (incl. oil pan)
-
| 6 MAZAK INETGREX 300 4S / 1500 U |
Noise Noise level (LWA) Unconfirmed level (K) Measuring conditions Measuring method Measuring position
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors that influence the actual level or exposure of the work-force include the characteristics of the work room, the other sources of noise, etc. i.e. the number of machines and other adjacent processes, and the length of time for which an operator is exposed to the noise. Also the permissible exposure level can vary from country to country. This information, however, will enable the user of the machine to make a better evaluation or the hazard and risk.
-
MILLING SPINDLE PROTOCOL
| 7 MAZAK INETGREX 300 4S / 1500 U |
-
GEOMETRY PROTOCOL
| 8 MAZAK INETGREX 300 4S / 1500 U |
-
| 9 MAZAK INETGREX 300 4S / 1500 U |
-
| 10 MAZAK INETGREX 300 4S / 1500 U |
-
MACHINE PICTURES
| 11 MAZAK INETGREX 300 4S / 1500 U |
-
| 12 MAZAK INETGREX 300 4S / 1500 U |
-
| 13 MAZAK INETGREX 300 4S / 1500 U |
TRANSPORT PLAN
-
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
KISTNER GmbH & Co. KG | Industriestrasse 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
Diapositiva numero 1Diapositiva numero 2Diapositiva numero 3Diapositiva numero 4Diapositiva numero 5Diapositiva numero 6Diapositiva numero 7Diapositiva numero 8Diapositiva numero 9Diapositiva numero 10Diapositiva numero 11Diapositiva numero 12Diapositiva numero 13Diapositiva numero 14