PROJECT DIRECTORY

PROJECT CLIENTS BANYAN STREET CAPITAL80 SW 8TH ST #2200MIAMI, FL, 33130TEL: 305-722-9400

OAKTREE CAPITAL333 SOUTH GRAND AVE, 28TH FLOORLOS ANGELES, CA 90071TEL: 213-830-6300

COOPER CARRY ARCHITECTS191 PEACHTREE ST NESUITE #2400ATLANTA, GA, 30303TEL: 404-237-2000

MEP ENGINEER BARRETT, WOODYARD & ASSOCIATES, INC.3495 HOLCOMB BRIDGE ROADNORCROSS, GA 30092TEL: 770-810-8800

INTERIOR ARCHITECTURE

AV CONSULTANT BAKER AUDIO VISUAL2195 N NORCROSS TUCKER RDNORCROSS, GA 30071TEL: 770-441-2000

GENERAL NOTESA. GENERAL NOTES:

1.THE CONTRACT, ADDENDA, SUPPLEMENTAL CONDITIONS, GENERAL REQUIREMENTS, GENERAL CONDITIONS,AND TECHNICAL SPECIFICATIONS SHALL HAVE PRECEDENCE OVER THESE GENERAL NOTES. ANY CONFLICTBETWEEN THESE GENERAL NOTES AND LANGUAGE FOUND IN THE ABOVE DOCUMENTS OR IN THE DRAWINGSOR IN ANY OTHER CONTRACT DOCUMENT SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECTIMMEDIATELY FOR FURTHER CLARIFICATION.

2. CONTRACTOR SHALL PROVIDE COMPLETE SYSTEMS AND ASSEMBLIES THAT INCLUDE ALL COMPONENTSNECESSARY FOR A FULLY FUNCTIONAL ASSEMBLY SATISFYING THE DESIGN INTENT, COMPLY WITH THEREQUIREMENTS INDICATED IN THE CONTRACT DOCUMENTS AND READY FOR THE INTENDED USE. REFERENCECONDITIONS OF THE CONTRACT AND/OR GENERAL REQUIREMENTS FOR ADDITIONAL INFORMATION.

3. REFERENCE CONDITIONS OF THE CONTRACT AND/OR GENERAL REQUIREMENTS FOR ANY OCCUPANCYRESTRICTIONS OR REQUIREMENTS DURING CONSTRUCTION.

4. REFERENCE CONDITIONS OF THE CONTRACT AND/OR GENERAL REQUIREMENTS REGARDING REQUIREMENTSFOR DOCUMENTATION AND REPORTING OF FIELD CONDITIONS BY THE CONTRACTOR AND COORDINATION WITHTHE CONTRACT DOCUMENTS.

5. REFERENCE CONDITIONS OF THE CONTRACT AND/OR GENERAL REQUIREMENTS REGARDING COORDINATIONOF THE WORK OR OTHER SPECIAL COORDINATION REQUIREMENTS.

B. DEFINITIONS:

1. TYPICAL OR TYP. INDICATES IDENTICAL COMPLETE SYSTEM, ASSEMBLY OR COMPONENT SHALL BEPROVIDED FOR EACH OCCURRENCE OF THE CONDITION NOTED.

2. SIMILAR INDICATES COMPLETE SYSTEM, ASSEMBLY AND COMPONENTS SHALL BE PROVIDED, INCLUDINGANY ADJUSTMENTS REQUIRED DUE TO VARIATION AT A PARTICULAR CONDITION, RESULTING IN COMPARABLECHARACTERISTICS FOR THE SIMILAR CONDITION NOTED. THE ARCHITECT SHALL BE THE SOLE JUDGE OF ASIMILAR CONDITIONS COMPLIANCE WITH THE DESIGN INTENT.

3. AS REQUIRED INDICATES ITEMS OF WORK REQUIRED TO PROVIDE FOR A COMPLETE SYSTEM, ASSEMBLYOR COMPONENT AS INDICATED IN THE CONTRACT DOCUMENTS. ALL COMPONENTS OF THE NOTED SYSTEMSHALL BE PROVIDED, INSTALLED, COMPLETE AND READY FOR THE INTENDED USE.

4. ALIGN INDICATES ACCURATELY PROVIDE FINISH FACES OF MATERIALS IN STRAIGHT, TRUE, LEVEL AND/ORPLUMB RELATION TO ADJACENT SURFACES WITHIN TOLERANCES DEFINED IN THE TECHNICAL SPECIFICATIONS.

5. REFERENCE DIVISION 01 OF THE PROJECT MANUAL FOR ADDITIONAL DEFINITIONS AND CLARIFICATIONS.

C. DIMENSIONS:

1. DIMENSIONS ARE INDICATED TO THE CENTERLINE OF STRUCTURAL GRID, FACE OF CAST-IN-PLACE CONCRETEWALL, FACE OF UNIT MASONRY WALL, AND/OR TO THE FINISH FACE OF INTERIOR WALLS AND PARTITIONS ASSCHEDULED, UNLESS NOTED OTHERWISE.

2. FLOOR ELEVATIONS ARE INDICATED TO THE TOP SURFACE OF THE STRUCTURAL SLAB, UNLESS NOTEDOTHERWISE.

3. CEILING HEIGHTS ARE INDICATED FROM FLOOR ELEVATIONS TO THE FINISH FACE OF SUSPENDED CEILINGSYSTEMS OR FACE OF FINISH MATERIALS, AS INDICATED OR SCHEDULED.

4. DIMENSIONS SHOWN ON THE DRAWINGS SHALL INDICATE THE REQUIRED SIZES, CLEARANCES, ANDDIMENSIONAL RELATIONSHIPS BETWEEN PROJECT SYSTEMS, ASSEMBLIES AND COMPONENTS. DIMENSIONSSHALL NOT BE DETERMINED BY SCALING THE DRAWINGS.

5. WHERE EQUIPMENT OR COMPONENTS HAVE DIMENSIONAL VARIATION DEPENDENT ON THE SELECTEDMANUFACTURER, THE CONTRACTOR SHALL BE RESPONSIBLE TO COORDINATE ADJOINING CONSTRUCTION TOACCOMMODATE THE SELECTED MANUFACTURERS REQUIREMENTS.

6. REFERENCE DIVISION 01 OF THE PROJECT MANUAL FOR ADDITIONAL REQUIREMENTS FOR COORDINATION OFDRAWINGS AND DIMENSIONS.

VICINITY MAP:

191 PEACHTREE ST NEATLANTA, GA 30303

APPLICABLE CODESBUILDING: INTERNATIONAL BUILDING CODE, 2012 EDITION WITH GEORGIA AMENDMENTS 2014 & 2015

FIRE: INTERNATIONAL FIRE CODE, 2012 EDITION WITH GEORGIA AMENDMENTS 2014

LIFE SAFETY: NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) 101 LIFE SAFETY CODE, 2012EDITION WITH GEORGIA AMENDMENTS 2011

MECHANICAL: INTERNATIONAL MECHANICAL CODE, 2012 EDITION WITH GEORGIA AMENDMENTS2014 & 2015

PLUMBING: INTERNATIONAL PLUMBING CODE, 2012 EDITION WITH GEORGIA AMENDMENTS 2014 & 2015

ELECTRICAL: NATIONAL ELECTRICAL CODE, 2012 EDITION

GAS: INTERNATIONAL FUEL GAS CODE, 2012 EDITION WITH GEORGIA AMENDMENTS 2014 &2015

ENERGY: INTERNATIONAL ENERGY CONSERVATION CODE, 2012 EDITION WITH GEORGIAAMENDMENTS 2011 & 2012

ACCESSIBILITY: GEORGIA ACCESSIBILITY HANDICAPPED ACCESSIBILITY LAW 120-3-20 2010 STANDARDSFOR ACCESSIBLE DESIGN

FAIR HOUSING: FEDERAL FAIR HOUSING ACT GUIDELINES 1990

00 View NameSCALE: 1/8" = 1'-0"A00.00A00.00

DRAWING TITLE

00 View NameSCALE: 1/8" = 1'-0"A00.00

DRAWING NUMBER

SHEET NUMBER ON WHICHDRAWING ORIGINATES

SHEET NUMBER ON WHICHDRAWING APPEARS

DRAWING TITLEDRAWING NUMBER

SHEET NUMBER ON WHICHDRAWING APPEARS

SECTION MARKERSECTION DRAWING NUMBER

SHEET NUMBER ON WHICHSECTION IS DRAWN

1A01.01

SIM

EXTERIOR ELEVATION MARKERELEVATION DRAWING NUMBER

SHEET NUMBER ON WHICHELEVATION IS DRAWN

A01.01

1

INTERIOR ELEVATION MARKER

A01.01

1

3

24

RATED PARTITION LEGEND1 HOUR SEPARATION ASSEMBLYOR FIRE PARTITION

2 HOUR SEPARATION ASSEMBLYOR FIRE PARTITION

3 HOUR SEPARATION ASSEMBLYOR FIRE PARTITION

4 HOUR SEPARATION ASSEMBLYOR FIRE PARTITION

PARTITION TYPE MARKERPARTITION TYPE-SEE FLOOR PLANS

DIMENSIONAL STANDARDS 88.8

2 3/4"

CLEAR2" 1/2"

FINISH FACE(U.N.O.)

CRITICAL FINISHEDDIMENSION

DIMENSION TOCENTERLINEOF COLUMN

MISC. TAGS 00

FIRST FLOOR LEVELEL. 0' 00"FLOOR ELEVATION SYMBOL

OS478-WX

GENERAL KEYNOTES, ACCESSORY TAGS,AND/OR FIXTURE TAGS - REFERENCE DRAWINGS

00

SPOT ELEVATION SYMBOL 8' 0" A.F.F. 8' 0" A.F.F.

DOOR NUMBER SYMBOL 000DIGITS COORDINATE WITH ROOM NUMBERS

WINDOW TYPE 00

COLUMN MARKER 88.8

88.8 88.8NEW EXISTING

ROOM TAG

CEILING HEIGHT MARKER

20' 10 3/8" ACT8

00

20' 10 3/8"

20' 10 3/8"P00 ACT8

CEILING HEIGHT

FINISH COLOR

CEILING MATERIAL

PROJECT WILL USE ONE OF THESE MARKERS

CURTAIN WALL GLASS & PANEL TYPES G1 G1

SYMBOLS

SHEET NUMBER ON WHICHELEVATION IS DRAWN

ELEVATION DRAWING NUMBER

88.8

SMOKE SEPARATION ASSEMBLY

00000ROOM NAME

*FIRE EXTINGUISHER AND/OR CABINET

ABBREVIATIONSA

ACP ACOUSTICAL CEILING PANELAD AREA DRAINADJ ADJACENTADMIN ADMINISTRATIONADA AMERICANS W/ DISABILITIES ACTAFF ABOVE FINISHED FLOORALT ALTERNATEALUM ALUMINUMANOD ANODIZE(D)APPROX APPROXIMATEARCH ARCHITECT(URAL)ASPH ASPHALTASSY ASSEMBLY

BBD BOARDBITUM BITUMIN(OUS)BLDG BUILDINGBUR BUILT-UP ROOFING

CCB CATCH BASINCER CERAMICCJ CONTROL JOINTCL CENTER LINECLG CEILINGCLO CLOSETCLR CLEARCMU CONCRETE MASONRY UNITCOL COLUMNCONC CONCRETECONST CONSTRUCTIONCONT CONTINUOUSCOORD COORDINATECPT CARPETCT CERAMIC TILECTR CENTER

DDBL DOUBLEDEPT DEPARTMENTDET DETAILDF DRINKING FOUNTAINDIA DIAMETERDIM DIMENSIONDISP DISPENSERDS DOWNSPOUTDR DOORDWG DRAWING

EEA EACHEIFS EXTERIOR INSULATION &

FINISH SYSTEMEJ EXPANSION JOINTEL ELEVATIONELEC ELECTRIC(AL)ELEV ELEVATOREOS EDGE OF SLABEPS EXPANDED MOLDED POLYSTYRENE

BOARD (INSULATION)XPS EXTRUDED POLYSTYRENE

BOARD (INSULATION)EQ EQUALEQUIP EQUIPMENTESCAL ESCALATOREXH EXHAUST

FFD FLOOR DRAINFE FIRE EXTINGUISHERFEC FIRE EXTINGUISHER CABINETFF FINISH FACEFHA FAIR HOUSING ACTFHC FIRE HOSE CABINETFIN FLR FINISH FLOORFIXT FIXTUREFLR FLOORFLG FLOORINGFLUOR FLUORESCENTFOS FACE OF STUDFRT FIRE RETARDANT TREATED

GGA GAGEGALV GALVANIZEDGFRC GLASS FIBER REINFORCED CONCRETEGFRG GLASS FIBER REINFORCED GYPSUMGFRP GLASS FIBER REINFORCED PLASTIC

GYP BD GYPSUM BOARD

HHB HOSE BIBBHC HANDICAPHM HOLLOW METALHYD HYDRANT

IID INSIDE DIAMETERIIC IMPACT ISOLATION CLASSINFO INFORMATIONINSUL INSULATIONIRMA INVERTED ROOF

MEMBRANE ASSEMBLY

JJAN JANITOR

LLAV LAVATORY

MMAX MAXIMUMMECH MECHANICALMEZZ MEZZANINEMH MANHOLEMIN MINIMUMMISC MISCELLANEOUS

NNA NOT APPLICABLENIC NOT IN CONTRACTNO NUMBERNTS NOT TO SCALE

OON CENTEROC

OD OUTSIDE DIAMETEROPNG OPENINGOPP OPPOSITE (HAND)ORD OVERFLOW ROOF DRAIN

PPL PROPERTY LINEPLAM PLASTIC LAMINATEPLAS PLASTERPLYWD PLYWOODPOL POLISHEDPSF POUNDS PER SQUARE FOOTPSI POUNDS PER SQUARE INCHPT PAINT

QQT QUARRY TILE

RR VALUE THERMAL RESISTANCERB RESILIENT BASERCP REFLECTED CEILING PLANRD ROOF DRAINREF REFERENCEREQD REQUIREDRM ROOMRO ROUGH OPENING

SSAB SOUND ATTENUATION

BLANKETSCHED SCHEDULESD STORM DRAINSHT SHEETSIM SIMILARSQ SQUARESPKR SPEAKERSPKLR SPRINKLERSTC SOUND TRANSMISSION

COEFFICIENTSTD STANDARD

STOR STORAGESTRUC STRUCTURALSST STAINLESS STEELSUSP SUSPEND(ED)SUSP.CLG SUSPENDED CEILINGSV SHEET VINYL

TT&G TONGUE & GROOVETEL TELEPHONETHK THICKNESSTHRU THROUGHTYP TYPICAL

UUL UNDERWRITERS LABORATORYUNO UNLESS NOTED OTHERWISE

VVCT VINYL COMPOSITION TILEVIF VERIFY IN FIELDVOL VOLUMEVT VINYL TILEVWC VINYL WALL COVERING

WWC WATER CLOSETWD WOODW/O WITHOUT

O.T.S. OPEN TO STRUCTURE

STL STEEL

ACC ACCESSIBLE

GWB GYPSUM WALL BOARD

MATERIALS LEGEND

02200 CRUSHED ROCK - GRAVEL FILL -POROUS FILL

02200 EARTH - UNDISTURBED

02200 EARTH - COMPACTED FILL

02200 SAND

03000 CONCRETE

040500 GROUT

04210 BRICK MASONRY

04220 CONCRETE MASONRY UNI